This Testcase applies the following versions of {{ rc.prod }}: {% for version in rc.ver %}{{ version }}{% if not loop.last %}, {% endif %}{% endfor %}
!!! info "Associated release criterion"
This test case is associated with the [Release_Criteria#packages-and-module-installation](9_release_criteria.md#packages-and-module-installation) release criterion. If you are doing release validation testing, a failure of this test case may be a breach of that release criterion.
## Description
Setting up a IdM system (FreeIPA) and using it's functionality leverages not also a lot of the packages in the official repos, it also tests quite a lot of used functions a corporate environment. This installatation will host it's own dns server for more generic testing without relying on the individual infrastructure of the environment.
## Requirements
- A freshly provisioned system (no other functions are allowed on this system except running the IdM services)
- IPv4 network with unmanaged domain name (installer will check for dns servers) and unmanaged reverse dns network (in my case here 10.30.30.0/24 and ipa1.network)
- In the case of this writeup the external dns server has the domain `example.com`, this has to have a entry for `r8-ipa1-dev.example.com` (this could also be replaced by a entry in the `/etc/hosts` file if no external dns server should be involved)
## Setup
1.`dnf module enable idm:DL1`
2.`dnf module install idm:DL1/dns`
3.`ipa-server-install`
- Do you want to configure integrated DNS (BIND)? [no]: yes
- Server host name [r8-ipa1-dev.example.com]: r8-ipa1-dev.example.com
- Please confirm the domain name [ipa1.network]: ipa1.network
- Please provide a realm name [IPA1.NETWORK]: IPA1.NETWORK
- Directory Manager password: `<password>`
Password (confirm): `<password>`
- IPA admin password: `<other-password>`
Password (confirm): `<other-password>`
- Please provide the IP address to be used for this host name: 10.30.30.1
- Enter an additional IP address, or press Enter to skip: `leave empty`
- Do you want to configure DNS forwarders? [yes]: yes
- Do you want to configure these servers as DNS forwarders? [yes]: yes
- Enter an IP address for a DNS forwarder, or press Enter to skip: `leave empty`
- Do you want to search for missing reverse zones? [yes]: yes
- NetBIOS domain name [IPA1]: IPA1
- Do you want to configure chrony with NTP server or pool address? [no]: yes
- Enter NTP source server addresses separated by comma, or press Enter to skip: `leave empty`
- Enter a NTP source pool address, or press Enter to skip: pool.ntp.org
- Continue to configure the system with these values? [no]: yes