forked from sig_altarch/RockyRpi
58 lines
2.3 KiB
Plaintext
58 lines
2.3 KiB
Plaintext
(This file comes from the kickstart/appliance-creator repo: https://git.resf.org/sig_altarch/RockyRpi )
|
|
|
|
Rocky 8 Raspberry Pi Image version 8.8
|
|
|
|
They have been tested on Raspberry Pi 3 and 4.
|
|
|
|
Rocky Linux WILL NOT WORK on a Raspberry Pi 1 or 2. They are 32-bit only, and Rocky Linux only supports arm64 (aarch64).
|
|
|
|
(edit: Raspberry Pi 2 version 1.2 boards are in fact 64-bit. There aren't too many of these, but they might work. Tell us on chat.rockylinux.org if you have one!)
|
|
|
|
|
|
QUICK START:
|
|
####################################################
|
|
Download the latest image, and write it to your raw microSD memory card (or other boot device).
|
|
|
|
GUI WAY (Linux/Win/Mac)
|
|
Grab a program like Balena Etcher ( https://www.balena.io/etcher/ ) GUI-based disk writer.
|
|
Insert your SD card and follow the instructions. It will extract and write your disk image.
|
|
|
|
|
|
COMMAND LINE WAY (assumes Linux system on a root (sudo su) shell):
|
|
xzcat Rocky_Image_file.raw.xz > /dev/sdX
|
|
(where X is the letter of your usb or memory card device, you can use fdisk -l to find which one)
|
|
|
|
BE CAREFUL, be sure which device you are writing to before you do it! Don't accidentally blow away your laptop/desktop hard drive!
|
|
|
|
|
|
|
|
Once your storage device is written to, you should be able to plug it in to a Raspberry Pi and boot!
|
|
|
|
|
|
Default username: rocky
|
|
Default password: rockylinux
|
|
|
|
|
|
Run "sudo rootfs-expand" to grow the partition and use all of your memory card or hard drive.
|
|
|
|
|
|
|
|
|
|
TECHNICAL DETAILS ABOUT THE IMAGES:
|
|
###################################################
|
|
- Minimal/base install, with some quality of life packages like vim,nano,bash-completion
|
|
- Additional Raspberry Pi repo and release package that has Rpi kernels/firmware from the excellent raspberrypi2 repo from upstream CentOS
|
|
- Script/fix for the wifi on rpi4 (linux-firmware bug)
|
|
- Default user "rocky" (member of wheel, can use sudo). Root password disabled by default
|
|
- Partition layout: 300 MB /boot , 512 MB swap, ~2800 MB rootfs. Able to fit on a 4 GB or larger sd card
|
|
- Everything else should be more or less a standard Rocky aarch64 installation
|
|
|
|
|
|
|
|
|
|
Feel free to share your experience or contribute in our chat channel at: https://chat.rockylinux.org/rocky-linux/channels/altarch !
|
|
|
|
-The Rocky Linux Team
|
|
|
|
Thanks for your interest in Rocky Linux on the Raspberry Pi!
|