split sbc into 3 profiles, gpt, mbr, and rpi

cloned sbc into 3, 1 for pi, 1 generic gpt, and 1 generic mbr
adjust readme
2024-10-28 02:37:33 +00:00 · 2024-08-04 00:24:14 +05:30 · 2024-07-15 09:45:20 -07:00
13 changed files with 254 additions and 91 deletions
--- a/README.md
+++ b/README.md
@ -6,6 +6,15 @@ Kiwi descriptions for Rocky Linux 9.
 changed to deal with live images (as kiwi doesn't seem to support using the
 --kiwi-file option for iso).

+### What can I build?
+
+At the time of this writing, you can create cloud images, live images, and
+containers. You can run any of the scripts to do so:
+
+* cloud-build.sh
+* container-build.sh
+* live-build.sh
+
 ### Can't you use the same config.xml? Why are you symlinking?

 Yes and the reason why we're symlinking is that "name" and "displayname" are
@ -30,11 +39,54 @@ fact, most builds may fail in mock due to loop devices being unusable.
 **Note**: SELinux must be set to permissive.

 **Note**: There may be cases where a build will fail in mock. If this is the
-case, you may need to use `--isolation=simple`.
+case, you may need to use `--isolation=simple` or forego the use of mock.

 **Note**: If you receive an error about loop devices while running in mock, run
 this on the host instead.

+#### Live Image Example on Rocky Linux 9 without using mock
+
+```
+# Use SIG/Core
+% dnf install rocky-release-core
+% dnf install kiwi-cli git \
+  dracut-kiwi-live \
+  kiwi-systemdeps-{bootloaders,containers,core,disk-images,filesystems,image-validation,iso-media}
+
+% sudo setenforce 0
+% git clone https://git.resf.org/sig_core/rocky-kiwi-descriptions -b r9
+% cd rocky-kiwi-descriptions
+% ln -sf configs/live-xfce.xml config.xml
+% kiwi-ng --debug --type="iso" \
+  --profile="XFCE-Live" \
+  --color-output system \
+  build \ 
+  --description="./" \
+  --target-dir /builddir/lmc
+```
+
+If you wish to use EPEL instead...
+
+```
+% dnf install epel-release -y
+% crb enable
+% dnf install kiwi-cli git \
+  dracut-kiwi-live \
+  kiwi-systemdeps-{bootloaders,containers,core,disk-images,filesystems,image-validation,iso-media} \
+  distribution-gpg-keys
+
+% sudo setenforce 0
+% git clone https://git.resf.org/sig_core/rocky-kiwi-descriptions -b r9
+% cd rocky-kiwi-descriptions
+% ln -sf configs/live-xfce.xml config.xml
+% kiwi-ng --debug --type="iso" \
+  --profile="XFCE-Live" \
+  --color-output system \
+  build \ 
+  --description="./" \
+  --target-dir /builddir/lmc
+```
+
 #### Live Image Example (EPEL) using mock

 The below makes an XFCE live image using SIG/Core packages.
@ -93,46 +145,6 @@ mock environment.
 ```
 % bash live-build.sh --live-image XFCE --output-dir /builddir/xfce
 ```
+#### SBC Images
+Profiles choices include "GenericArm-GPT", "GenericArm-MBR", "RaspberryPi"

-#### Live Image Example on Rocky Linux 9 without using mock
-
-```
-# Use SIG/Core
-% dnf install rocky-release-core
-% dnf install kiwi-cli git \
-  dracut-kiwi-live \
-  kiwi-systemdeps-{bootloaders,containers,core,disk-images,filesystems,image-validation,iso-media}
-
-% sudo setenforce 0
-% git clone https://git.resf.org/sig_core/rocky-kiwi-descriptions -b r9
-% cd rocky-kiwi-descriptions
-% ln -sf configs/live-xfce.xml config.xml
-% kiwi-ng --debug --type="iso" \
-  --profile="XFCE-Live" \
-  --color-output system \
-  build \ 
-  --description="./" \
-  --target-dir /builddir/lmc
-```
-
-If you wish to use EPEL instead...
-
-```
-% dnf install epel-release -y
-% crb enable
-% dnf install kiwi-cli git \
-  dracut-kiwi-live \
-  kiwi-systemdeps-{bootloaders,containers,core,disk-images,filesystems,image-validation,iso-media} \
-  distribution-gpg-keys
-
-% sudo setenforce 0
-% git clone https://git.resf.org/sig_core/rocky-kiwi-descriptions -b r9
-% cd rocky-kiwi-descriptions
-% ln -sf configs/live-xfce.xml config.xml
-% kiwi-ng --debug --type="iso" \
-  --profile="XFCE-Live" \
-  --color-output system \
-  build \ 
-  --description="./" \
-  --target-dir /builddir/lmc
-```
--- a/components/users.xml
+++ b/components/users.xml
@ -6,7 +6,7 @@
    <user name="rocky" groups="rocky,wheel" password="thereisnopassword" home="/home/rocky" pwdformat="encrypted" />
  </users> -->
  <!-- Only for SBC -->
-  <users profiles="Core-Pi">
+  <users profiles="Core-Pi,CoreSBC">
    <user password="$6$ggstAnji$tPNhSHa/OG4UrJ0P77ZHlCunu.pueMXtXgAER51mTJ7bpXl/onDplJXd0usMSlFP4gOn/A7BM7cGoVw/WcCKS." home="/home/rocky" name="rocky" groups="rocky,wheel"/>
  </users>
 </image>
--- a/config.xml
+++ b/config.xml
@ -1 +1 @@
-configs/rocky.xml
+configs/rocky-sbc-genericarm-gpt.xml
--- a/configs/rocky-sbc-genericarm-gpt.xml
+++ b/configs/rocky-sbc-genericarm-gpt.xml
@ -1,6 +1,6 @@
 <?xml version="1.0" encoding="utf-8"?>

-<image schemaversion="7.4" name="Rocky">
+<image schemaversion="7.5" name="Rocky-generic-gpt">
  <description type="system">
    <author>Release Engineering (SIG/Core)</author>
    <contact>releng@rockylinux.org</contact>
@ -19,7 +19,7 @@
  <include from="this://./repositories/gnulab-tmp.xml"/>
  <include from="this://./components/boot.xml"/>
  <include from="this://./components/users.xml"/>
-  <include from="this://./sbc/pi.xml"/>
+  <include from="this://./sbc/sbc-gpt.xml"/>
  <packages type="bootstrap">
    <package name="basesystem"/>
    <package name="filesystem"/>
--- a/configs/rocky-sbc-genericarm-mbr.xml
+++ b/configs/rocky-sbc-genericarm-mbr.xml
@ -0,0 +1,27 @@
+<?xml version="1.0" encoding="utf-8"?>
+
+<image schemaversion="7.4" name="Rocky-generic-mbr">
+  <description type="system">
+    <author>Release Engineering (SIG/Core)</author>
+    <contact>releng@rockylinux.org</contact>
+    <specification>Rocky Linux</specification>
+  </description>
+  <preferences>
+    <version>9</version>
+    <packagemanager>dnf</packagemanager>
+    <locale>en_US</locale>
+    <keytable>us</keytable>
+    <timezone>UTC</timezone>
+    <release-version>9</release-version>
+  </preferences>
+  <include from="this://./repositories/core.xml"/>
+  <include from="this://./repositories/altarch-common.xml"/>
+  <include from="this://./repositories/gnulab-tmp.xml"/>
+  <include from="this://./components/boot.xml"/>
+  <include from="this://./components/users.xml"/>
+  <include from="this://./sbc/sbc-mbr.xml"/>
+  <packages type="bootstrap">
+    <package name="basesystem"/>
+    <package name="filesystem"/>
+  </packages>
+</image>
--- a/configs/rocky-sbc-raspberrypi.xml
+++ b/configs/rocky-sbc-raspberrypi.xml
@ -1,6 +1,6 @@
 <?xml version="1.0" encoding="utf-8"?>

-<image schemaversion="7.4" name="Rocky">
+<image schemaversion="7.4" name="Rocky-rpi">
  <description type="system">
    <author>Release Engineering (SIG/Core)</author>
    <contact>releng@rockylinux.org</contact>
--- a/repositories/gnulab-tmp.xml
+++ b/repositories/gnulab-tmp.xml
@ -6,4 +6,7 @@
  <repository type="rpm-md" alias="gnulab_tmp_2" priority="1">
    <source path="https://rockyrepos.gnulab.org/rpir$releasever/"/>
  </repository>
+  <repository type="rpm-md" alias="codedude" priority="1">
+    <source path="https://sbccrazy.codedude.us/aarch64_el9/kernel-mainline-sbc/"/>
+  </repository>
 </image>
--- a/29
+++ b/29
@ -0,0 +1,29 @@
+#!/bin/bash
+clear
+part=$(mount |grep '^/dev.* / ' |awk '{print $1}')
+if [ -z "\$part" ];then
+    echo "Error detecting rootfs"
+    exit -1
+fi
+dev=$(echo $part|sed 's/[0-9]*$//g')
+devlen=${#dev}
+num=${part:$devlen}
+if [[ "$dev" =~ ^/dev/(mmcblk|nvme[0-9]+n)[0-9]*p$ ]];then
+    dev=${dev:0:-1}
+fi
+if [ ! -x /usr/bin/growpart ];then
+    echo "Please install cloud-utils-growpart (sudo yum install cloud-utils-growpart)"
+    exit -2
+fi
+if [ ! -x /usr/sbin/resize2fs ];then
+    echo "Please install e2fsprogs (sudo yum install e2fsprogs)"
+    exit -3
+fi
+echo $part $dev $num
+
+echo "Extending partition $num to max size ...."
+growpart $dev $num
+echo "Resizing ext4 filesystem ..."
+resize2fs $part
+echo "Done."
+df -h |grep $part
--- a/sbc-build.sh
+++ b/sbc-build.sh
@ -80,19 +80,27 @@ function switch_repo_to_peridot() {
 }

 function main() {
-  /bin/rm config.xml
+  if [[ -e config.xml ]]; then
+      /bin/rm config.xml
+  fi
  if [ ! -f "configs/rocky-sbc-${SBC,,}.xml" ]; then
    echo "${LIVE} was not found. Is it supported?"
    exit 42
  fi
-  ln -sf "configs/rocky-sbc-${SBC,,}.xml" config.xml
+  #ln -sf "configs/rocky-sbc-${SBC,,}.xml" config.xml

  if [ -n "$PERIDOTID" ]; then
    switch_repo_to_peridot "${PERIDOTID}"
  fi
-
+  if [[ $SBC == "GenericArm-GPT" ]]; then
+    ln -s configs/rocky-sbc-genericarm-gpt.xml config.xml
+  elif [[ $SBC == "GenericArm-MBR" ]]; then
+    ln -s configs/rocky-sbc-genericarm-mbr.xml config.xml
+  else
+    ln -s configs/rocky-sbc-raspberrypi.xml config.xml
+  fi
  # shellcheck disable=SC2086
-  kiwi-ng $DEBUG --type="oem" --profile="SBC-$SBC" --color-output system build --description="$SCRDIR" --target-dir "$OUTPUTDIR"
+    kiwi-ng $DEBUG --type="oem" --profile="SBC-$SBC" --color-output system build --description="$SCRDIR" --target-dir "$OUTPUTDIR"
 }

 main
--- a/sbc/pi.xml
+++ b/sbc/pi.xml
@ -6,9 +6,6 @@
    <profile name="SBC-RaspberryPi" description="Raspberry Pi Image">
      <requires profile="Core-Pi"/>
    </profile>
-    <profile name="SBC-GenericArm" description="Generic ARM Image">
-      <requires profile="Core-Pi"/>
-    </profile>
  </profiles>
  <!-- RPI -->
  <preferences profiles="SBC-RaspberryPi" arch="aarch64">
@ -28,25 +25,6 @@
      <bootloader name="grub2" console="serial"/>
    </type>
  </preferences>
-  <preferences profiles="SBC-GenericArm" arch="aarch64">
-    <type image="oem"
-      filesystem="ext4"
-      bootpartition="true" bootpartsize="1000" bootfilesystem="ext4" efipartsize="500" firmware="efi"
-      kernelcmdline="root=LABEL=rootfs rootfstype=ext4 elevator=deadline rootwait console=ttyS0"
-      devicepersistency="by-label"
-      editbootinstall="sbc/editbootinstall_genericarm.sh"
-      rootfs_label="rootfs">
-      <oemconfig>
-        <oem-resize>false</oem-resize>
-        <oem-skip-verify>true</oem-skip-verify>
-        <oem-swap>true</oem-swap>
-        <oem-swapsize>500</oem-swapsize>
-      </oemconfig>
-      <bootloader name="grub2" console="serial"/>
-      <size unit="G">3</size>
-    </type>
-  </preferences>
-
  <packages type="image" patternType="plusRecommended" profiles="Core-Pi">
    <namedCollection name="core"/>
    <package name="rocky-release"/>
@ -62,25 +40,8 @@
    <package name="NetworkManager-wifi"/>
    <package name="rng-tools"/>
    <package name="vim"/>
-  </packages>
-  <packages type="image" patternType="plusRecommended" profiles="SBC-RaspberryPi">
    <package name="rocky-release-rpi"/>
    <package name="raspberrypi2-firmware"/>
    <package name="raspberrypi2-kernel4"/>
  </packages>
-  <packages type="image" patternType="plusRecommended" profiles="SBC-GenericArm">
-    <package name="bcm2711-firmware"/>
-    <package name="bcm2835-firmware"/>
-    <package name="bcm283x-firmware"/>
-    <package name="bcm283x-overlays"/>
-    <package name="dracut-config-generic"/>
-    <package name="efibootmgr"/>
-    <package name="kernel"/>
-    <package name="kernel-core"/>
-    <package name="systemd-udev"/>
-    <package name="uboot-images-armv8"/>
-    <package name="uboot-tools"/>
-    <ignore name="dracut-config-rescue"/>
-    <ignore name="java-11-*"/>
-  </packages>
 </image>
--- a/sbc/sbc-gpt.xml
+++ b/sbc/sbc-gpt.xml
@ -0,0 +1,55 @@
+<image>
+    <profiles>
+    <profile name="CoreSBC" description="SBC Base Packages">
+	    <requires profile="Core-Boot"/>
+    </profile>
+    <profile name="SBC-GenericArm-GPT" description="Generic ARM Image GPT">
+    <requires profile="CoreSBC"/>
+    </profile>
+  </profiles>
+  <preferences profiles="SBC-GenericArm-GPT" arch="aarch64">
+    <type image="oem"
+      filesystem="ext4"
+      bootpartition="true" bootpartsize="1000" bootfilesystem="ext4" efipartsize="500" firmware="efi"
+      kernelcmdline="root=LABEL=rootfs rootfstype=ext4 elevator=deadline rootwait console=ttyS0"
+      devicepersistency="by-label"
+      rootfs_label="rootfs">
+      <oemconfig>
+        <oem-resize>false</oem-resize>
+        <oem-skip-verify>true</oem-skip-verify>
+        <oem-swap>true</oem-swap>
+        <oem-swapsize>500</oem-swapsize>
+      </oemconfig>
+      <bootloader name="grub2" console="serial"/>
+      <size unit="G">5</size>
+    </type>
+  </preferences>
+  <packages type="image" patternType="plusRecommended" profiles="CoreSBC">
+    <namedCollection name="core"/>
+    <package name="rocky-release"/>
+    <package name="rocky-release-altarch"/>
+    <package name="bash-completion"/>
+    <package name="chrony"/>
+    <package name="cloud-utils-growpart"/>
+    <package name="langpacks-en"/>
+    <package name="glibc-all-langpacks"/>
+    <package name="net-tools"/>
+    <package name="nano"/>
+    <package name="NetworkManager-wifi"/>
+    <package name="rng-tools"/>
+    <package name="vim"/>
+    <package name="bcm2711-firmware"/>
+    <package name="bcm2835-firmware"/>
+    <package name="bcm283x-firmware"/>
+    <package name="bcm283x-overlays"/>
+    <package name="dracut-config-generic"/>
+    <package name="efibootmgr"/>
+    <package name="kernel-mainline-sbc"/>
+    <package name="systemd-udev"/>
+    <package name="uboot-images-armv8"/>
+    <package name="uboot-tools"/>
+    <ignore name="dracut-config-rescue"/>
+    <ignore name="java-11-*"/>
+    <ignore name="kernel-core-6*"/>
+  </packages>
+</image>
--- a/sbc/sbc-mbr.xml
+++ b/sbc/sbc-mbr.xml
@ -0,0 +1,56 @@
+<image>
+    <profiles>
+    <profile name="CoreSBC" description="SBC Base Packages">
+            <requires profile="Core-Boot"/>
+    </profile>
+    <profile name="SBC-GenericArm-MBR" description="Generic ARM Image MBR">
+      <requires profile="CoreSBC"/>
+    </profile>
+  </profiles>
+  <preferences profiles="SBC-GenericArm-MBR" arch="aarch64">
+    <type image="oem"
+      filesystem="ext4"
+      bootpartition="true" bootpartsize="1000" bootfilesystem="ext4" efipartsize="500" firmware="efi"
+      kernelcmdline="root=LABEL=rootfs rootfstype=ext4 elevator=deadline rootwait console=ttyS0"
+	    devicepersistency="by-label"
+	    editbootinstall="sbc/editbootinstall_rpi.sh"
+      rootfs_label="rootfs">
+      <oemconfig>
+        <oem-resize>false</oem-resize>
+        <oem-skip-verify>true</oem-skip-verify>
+        <oem-swap>true</oem-swap>
+        <oem-swapsize>500</oem-swapsize>
+      </oemconfig>
+      <bootloader name="grub2" console="serial"/>
+      <size unit="G">5</size>
+    </type>
+  </preferences>
+  <packages type="image" patternType="plusRecommended" profiles="CoreSBC">
+    <namedCollection name="core"/>
+    <package name="rocky-release"/>
+    <package name="rocky-release-altarch"/>
+    <package name="bash-completion"/>
+    <package name="chrony"/>
+    <package name="cloud-utils-growpart"/>
+    <package name="langpacks-en"/>
+    <package name="glibc-all-langpacks"/>
+    <package name="net-tools"/>
+    <package name="nano"/>
+    <package name="NetworkManager-wifi"/>
+    <package name="rng-tools"/>
+    <package name="vim"/>
+    <package name="bcm2711-firmware"/>
+    <package name="bcm2835-firmware"/>
+    <package name="bcm283x-firmware"/>
+    <package name="bcm283x-overlays"/>
+    <package name="dracut-config-generic"/>
+    <package name="efibootmgr"/>
+    <package name="kernel-mainline-sbc"/>
+    <package name="systemd-udev"/>
+    <package name="uboot-images-armv8"/>
+    <package name="uboot-tools"/>
+    <ignore name="dracut-config-rescue"/>
+    <ignore name="java-11-*"/>
+    <ignore name="kernel-core-6*"/>
+  </packages>
+</image>
--- a/wsl/default.xml
+++ b/wsl/default.xml
@ -0,0 +1,12 @@
+<image>
+  <profiles>
+    <profile name="XFCE-Live" description="Rocky Linux XFCE">
+      <requires profile="Live-Base"/>
+      <requires profile="XFCE-Desktop"/>
+    </profile>
+  </profiles>
+  <packages type="bootstrap" patternType="plusRecommended" profiles="XFCE-Live">
+    <package name="rocky-release"/>
+    <package name="epel-release"/>
+  </packages>
+</image>
Author	SHA1	Message	Date
Bryan	43dff877cf	split sbc into 3 profiles, gpt, mbr, and rpi	2024-10-28 02:37:33 +00:00
Bryan Zuelly	c807a0fce6	cloned sbc into 3, 1 for pi, 1 generic gpt, and 1 generic mbr	2024-08-04 00:24:14 +05:30
Louis Abel	16d7eb00bf	adjust readme	2024-07-15 09:45:20 -07:00