62 changed files with 6 additions and 3483 deletions
--- a/README.md
+++ b/README.md
@ -1,150 +1,9 @@
 ## rocky-kiwi-descriptions

-Kiwi descriptions for Rocky Linux 9.
-
-`config.xml` is a symlink to `rocky.xml`. this way the symlink can just be
-changed to deal with live images (as kiwi doesn't seem to support using the
--kiwi-file option for iso).
-
-### What can I build?
-
-At the time of this writing, you can create cloud images, live images, and
-containers. You can run any of the scripts to do so:
-
-* cloud-build.sh
-* container-build.sh
-* live-build.sh
-
-### Can't you use the same config.xml? Why are you symlinking?
-
-Yes and the reason why we're symlinking is that "name" and "displayname" are
-not flexible. They are only set/read at the very top level `<image>` (at least
-from testing at the time of this writing). As our images and volume names (at
-least for live images) have a very specific format, and we want it to be easy
-to rename them, we did it this way.
-
-Cloud, container, vagrant images can all use the first config, likely just fine.
-The live images were the problematic ones, thus, symlinks with a default to the
-`rocky.xml` config.
-
-### I found an issue...
-
-Please fork and make a PR! We're still learning how this tool works ourselves.
-
-### How to try it out
-
-You can run this on a running system, in a mock root, or a podman container. In
-fact, most builds may fail in mock due to loop devices being unusable.
-
-**Note**: SELinux must be set to permissive.
-
-**Note**: There may be cases where a build will fail in mock. If this is the
-case, you may need to use `--isolation=simple` or forego the use of mock.
-
-**Note**: If you receive an error about loop devices while running in mock, run
-this on the host instead.
-
-#### Live Image Example on Rocky Linux 9 without using mock
-
-```
-# Use SIG/Core
-% dnf install rocky-release-core
-% dnf install kiwi-cli git \
-  dracut-kiwi-live \
-  kiwi-systemdeps-{bootloaders,containers,core,disk-images,filesystems,image-validation,iso-media}
-
-% sudo setenforce 0
-% git clone https://git.resf.org/sig_core/rocky-kiwi-descriptions -b r9
-% cd rocky-kiwi-descriptions
-% ln -sf configs/live-xfce.xml config.xml
-% kiwi-ng --debug --type="iso" \
-  --profile="XFCE-Live" \
-  --color-output system \
-  build \ 
-  --description="./" \
-  --target-dir /builddir/lmc
-```
-
-If you wish to use EPEL instead...
-
-```
-% dnf install epel-release -y
-% crb enable
-% dnf install kiwi-cli git \
-  dracut-kiwi-live \
-  kiwi-systemdeps-{bootloaders,containers,core,disk-images,filesystems,image-validation,iso-media} \
-  distribution-gpg-keys
-
-% sudo setenforce 0
-% git clone https://git.resf.org/sig_core/rocky-kiwi-descriptions -b r9
-% cd rocky-kiwi-descriptions
-% ln -sf configs/live-xfce.xml config.xml
-% kiwi-ng --debug --type="iso" \
-  --profile="XFCE-Live" \
-  --color-output system \
-  build \ 
-  --description="./" \
-  --target-dir /builddir/lmc
-```
-
-#### Live Image Example (EPEL) using mock
-
-The below makes an XFCE live image using SIG/Core packages.
-
-```
-# Use SIG/Core
-% git clone https://git.resf.org/sig_core/mock-rocky-configs
-% bash deploy.sh
-% mock -r rl-9-x86_64-core-infra --init
-% mock -r rl-9-x86_64-core-infra --install kiwi-cli git \
-  dracut-kiwi-live \
-  kiwi-systemdeps-{bootloaders,containers,core,disk-images,filesystems,image-validation,iso-media} \
-  epel-release \
-  rocky-release-core
-
-% sudo setenforce 0
-% mock -r rl-9-x86_64-core-infra --shell --enable-network
-% git clone https://git.resf.org/sig_core/rocky-kiwi-descriptions -b r9
-% cd rocky-kiwi-descriptions
-% ln -sf configs/live-xfce.xml config.xml
-% kiwi-ng --debug --type="iso" \
-  --profile="XFCE-Live" \
-  --color-output system \
-  build \ 
-  --description="./" \
-  --target-dir /builddir/lmc
-```
-
-The below uses EPEL instead if you do not wish to use SIG/Core.
-
-```
-# Use EPEL
-% mock -r rocky+epel-9-x86_64 --init
-% mock -r rocky+epel-9-x86_64 --install kiwi-cli git \
-  dracut-kiwi-live \
-  kiwi-systemdeps-{bootloaders,containers,core,disk-images,filesystems,image-validation,iso-media} \
-  distribution-gpg-keys \
-  epel-release
-
-% sudo setenforce 0
-% mock -r rocky+epel-9-x86_64 --shell --enable-network
-% git clone https://git.resf.org/sig_core/rocky-kiwi-descriptions -b r9
-% cd rocky-kiwi-descriptions
-% ln -sf configs/live-xfce.xml config.xml
-% kiwi-ng --debug --type="iso" \
-  --profile="XFCE-Live" \
-  --color-output system \
-  build \ 
-  --description="./" \
-  --target-dir /builddir/lmc
-```
-
-On the other hand, you can run the live-build.sh script after setting up your
-mock environment.
-
-```
-% bash live-build.sh --live-image XFCE --output-dir /builddir/xfce
-```
-#### SBC Images
-Profiles choices include "GenericArm-GPT", "GenericArm-MBR", "RaspberryPi"
+This repo is an attempt to translate our kickstarts into kiwi descriptions. The
+idea is to keep both the kickstarts up to date, as well as the kiwi descriptions
+as changes happen. This way, users can choose how they want to build and
+customize their own images as they see fit, away from the images that we build
+normally.

+Please go to the relevant branch for your needs.
--- a/cloud-build.sh
+++ b/cloud-build.sh
@ -1,99 +0,0 @@
-#!/bin/bash
-# helps build a quick cloud image. that way a user doesn't have to use emapandas
-# nor some other method. mock is probably not necessary, but it's up to you.
-# label@resf.org
-
-set -o errexit
-set -o pipefail
-
-SCRNAME="$(basename "$0")"
-SCRDIR="$(dirname "${BASH_SOURCE[0]}")"
-
-export __usage
-__usage="
-usage: $SCRNAME [OPTIONS]
-
-Options:
-  -o, --output-dir  DIR
-  -c, --cloud-image NAME
-  -p, --peridot     ID   # optional. will use peridot repos.
-  -d, --debug            # optional
-
-"
-
-OPTS=$(getopt -a -n cloud-build -o c:,o:,p:,d,h \
-  -l cloud-image:,output-dir:,peridot:,debug,help -- "$@")
-
-function is_in_path() {
-  builtin type -P "${1}"
-}
-
-function usage() {
-  echo "$__usage"
-}
-
-eval set -- "$OPTS"
-while :; do
-  case "$1" in
-    -c | --cloud-image) CLOUD="$2"      ; shift 2 ;;
-    -o | --output-dir)  OUTPUTDIR="$2"  ; shift 2 ;;
-    -p | --peridot)     PERIDOTID="$2"  ; shift 2 ;;
-    -d | --debug)       DEBUG="--debug" ; shift   ;;
-    -h | --help)        usage                     ;;
-    --) shift ; break ;;
-  esac
-done
-
-if [ -z "$CLOUD" ] || [ -z "$OUTPUTDIR" ]; then
-  echo "Options are not set properly."
-  usage
-  exit 12
-fi
-
-if [ -e "/sys/fs/selinux/enforce" ]; then
-  enforce_check="$(cat /sys/fs/selinux/enforce)"
-  if [ "$enforce_check" -eq "1" ]; then
-    echo "Running with selinux enforcing is not recommended."
-    exit 22
-  fi
-fi
-
-is_in_path kiwi-ng &> /dev/null
-ret_val=$?
-
-if [ "$ret_val" -ne "0" ]; then
-  echo "kiwi-ng not found. kiwi packages are likely not installed on this system."
-  exit 32
-fi
-
-function switch_repo_to_peridot() {
-  ID="$1"
-  # https://yumrepofs.build.resf.org/v1/projects/${ID}/repo/
-  pushd repositories || { echo "not found"; exit 1; }
-  sed -i "s;ZZ_INTERNAL_BaseOS_REPO_URL_ZZ;https://yumrepofs.build.resf.org/v1/projects/${ID}/repo/BaseOS/\$basearch;g" core-peridot.xml
-  sed -i "s;ZZ_INTERNAL_AppStream_REPO_URL_ZZ;https://yumrepofs.build.resf.org/v1/projects/${ID}/repo/AppStream/\$basearch;g" core-peridot.xml
-  sed -i "s;ZZ_INTERNAL_CRB_REPO_URL_ZZ;https://yumrepofs.build.resf.org/v1/projects/${ID}/repo/CRB/\$basearch;g" core-peridot.xml
-  sed -i "s;ZZ_INTERNAL_extras_REPO_URL_ZZ;https://yumrepofs.build.resf.org/v1/projects/${ID}/repo/extras/\$basearch;g" core-peridot.xml
-  rm core.xml
-  ln -sf core-peridot.xml core.xml
-  popd
-}
-
-function main() {
-  #/bin/rm config.xml
-  #if [ ! -f "configs/rocky-live-${LIVE,,}.xml" ]; then
-  #  echo "${LIVE} was not found. Is it supported?"
-  #  exit 42
-  #fi
-  #ln -sf "configs/rocky-live-${LIVE,,}.xml" config.xml
-  ln -sf "configs/rocky.xml" config.xml
-
-  if [ -n "$PERIDOTID" ]; then
-    switch_repo_to_peridot "${PERIDOTID}"
-  fi
-
-  # shellcheck disable=SC2086
-  kiwi-ng $DEBUG --type="oem" --profile="Cloud-$CLOUD" --color-output system build --description="$SCRDIR" --target-dir "$OUTPUTDIR"
-}
-
-main
--- a/cloud/cloud.xml
+++ b/cloud/cloud.xml
@ -1,256 +0,0 @@
-<image>
-  <profiles>
-    <profile name="Core-Cloud" description="Cloud Base Packages">
-      <requires profile="Core-Boot"/>
-    </profile>
-    <!-- Generic package set is a good starting point -->
-    <profile name="Cloud-GenericCloud-Base" description="GenericCloud Base Image">
-      <requires profile="Core-Cloud"/>
-    </profile>
-    <profile name="Cloud-GenericCloud-LVM" description="GenericCloud LVM Image">
-      <requires profile="Core-Cloud"/>
-    </profile>
-    <profile name="Cloud-Azure-Base" description="Azure Base Image">
-      <requires profile="Core-Cloud"/>
-    </profile>
-    <profile name="Cloud-Azure-LVM" description="Azure LVM Image">
-      <requires profile="Core-Cloud"/>
-    </profile>
-    <profile name="Cloud-EC2-Base" description="EC2 Base Image">
-      <requires profile="Core-Cloud"/>
-    </profile>
-    <profile name="Cloud-EC2-LVM" description="EC2 LVM Image">
-      <requires profile="Core-Cloud"/>
-    </profile>
-    <profile name="Cloud-OCP-Base" description="OCP Base Image">
-      <requires profile="Core-Cloud"/>
-    </profile>
-  </profiles>
-  <!-- Generic -->
-  <preferences profiles="Cloud-GenericCloud-Base" arch="x86_64,aarch64">
-    <type image="oem" format="qcow2"
-      filesystem="xfs"
-      bootpartition="true" bootpartsize="1000" bootfilesystem="xfs" efipartsize="100" firmware="uefi"
-      kernelcmdline="console=ttyS0,115200n8 no_timer_check crashkernel=auto net.ifnames=0"
-      devicepersistency="by-uuid"
-      rootfs_label="rocky">
-      <oemconfig>
-        <oem-resize>false</oem-resize>
-      </oemconfig>
-      <bootloader name="grub2" timeout="1" bls="true"/>
-      <size unit="G">10</size>
-    </type>
-  </preferences>
-  <preferences profiles="Cloud-GenericCloud-LVM" arch="x86_64,aarch64">
-    <type image="oem" format="qcow2"
-      filesystem="xfs"
-      bootpartition="true" bootpartsize="1000" bootfilesystem="xfs" efipartsize="100" firmware="uefi"
-      kernelcmdline="console=ttyS0,115200n8 no_timer_check crashkernel=auto net.ifnames=0"
-      devicepersistency="by-uuid"
-      rootfs_label="rocky">
-      <oemconfig>
-        <oem-resize>false</oem-resize>
-      </oemconfig>
-      <bootloader name="grub2" timeout="1" bls="true"/>
-      <size unit="G">10</size>
-      <systemdisk name="rocky" preferlvm="true">
-        <volume name="@root=lvroot" size="9000M" mountpoint="/" />
-      </systemdisk>
-    </type>
-  </preferences>
-  <!-- Generic specific to ppc64le -->
-  <preferences profiles="Cloud-GenericCloud-Base" arch="ppc64le">
-    <type image="oem" format="qcow2"
-      filesystem="xfs"
-      bootpartition="true" bootpartsize="1000" bootfilesystem="xfs" firmware="ofw"
-      kernelcmdline="console=ttyS0,115200n8 no_timer_check crashkernel=auto net.ifnames=0"
-      devicepersistency="by-uuid"
-      rootfs_label="rocky">
-      <oemconfig>
-        <oem-resize>false</oem-resize>
-      </oemconfig>
-      <bootloader name="grub2" timeout="1" bls="true"/>
-      <size unit="G">10</size>
-    </type>
-  </preferences>
-  <preferences profiles="Cloud-GenericCloud-LVM" arch="ppc64le">
-    <type image="oem" format="qcow2"
-      filesystem="xfs"
-      bootpartition="true" bootpartsize="1000" bootfilesystem="xfs" firmware="ofw"
-      kernelcmdline="console=ttyS0,115200n8 no_timer_check crashkernel=auto net.ifnames=0"
-      devicepersistency="by-uuid"
-      rootfs_label="rocky">
-      <oemconfig>
-        <oem-resize>false</oem-resize>
-      </oemconfig>
-      <bootloader name="grub2" timeout="1" bls="true"/>
-      <size unit="G">10</size>
-      <systemdisk name="rocky" preferlvm="true">
-        <volume name="@root=lvroot" size="9000M" mountpoint="/" />
-      </systemdisk>
-    </type>
-  </preferences>
-  <!-- Generic specific to s390x -->
-  <preferences profiles="Cloud-GenericCloud-Base" arch="s390x">
-    <type image="oem" format="qcow2"
-      filesystem="xfs"
-      bootpartition="true" bootpartsize="1000" bootfilesystem="xfs"
-      kernelcmdline="console=ttyS0,115200n8 no_timer_check crashkernel=auto net.ifnames=0"
-      devicepersistency="by-uuid"
-      rootfs_label="rocky">
-      <oemconfig>
-        <oem-resize>false</oem-resize>
-      </oemconfig>
-      <bootloader name="zipl" targettype="CDL" timeout="1"/>
-      <size unit="G">10</size>
-    </type>
-  </preferences>
-  <preferences profiles="Cloud-GenericCloud-LVM" arch="s390x">
-    <type image="oem" format="qcow2"
-      filesystem="xfs"
-      bootpartition="true" bootpartsize="1000" bootfilesystem="xfs"
-      kernelcmdline="console=ttyS0,115200n8 no_timer_check crashkernel=auto net.ifnames=0"
-      devicepersistency="by-uuid"
-      rootfs_label="rocky">
-      <oemconfig>
-        <oem-resize>false</oem-resize>
-      </oemconfig>
-      <bootloader name="zipl" targettype="CDL" timeout="1"/>
-      <size unit="G">10</size>
-      <systemdisk name="rocky" preferlvm="true">
-        <volume name="@root=lvroot" size="9000M" mountpoint="/" />
-      </systemdisk>
-    </type>
-  </preferences>
-  <!-- End Generic -->
-  <!-- Azure -->
-  <preferences profiles="Cloud-Azure-Base" arch="x86_64,aarch64">
-    <type image="oem" format="vhd-fixed" formatoptions="force_size"
-      filesystem="xfs"
-      bootpartition="true" bootpartsize="1000" bootfilesystem="xfs" efipartsize="100" firmware="uefi"
-      kernelcmdline="rootdelay=300 console=ttyS0 earlyprintk=ttyS0  no_timer_check crashkernel=auto net.ifnames=0"
-      devicepersistency="by-uuid"
-      rootfs_label="rocky">
-      <oemconfig>
-        <oem-resize>false</oem-resize>
-      </oemconfig>
-      <bootloader name="grub2" console="serial" timeout="1" bls="true"/>
-      <size unit="G">10</size>
-    </type>
-  </preferences>
-  <preferences profiles="Cloud-Azure-LVM" arch="x86_64,aarch64">
-    <type image="oem" format="vhd-fixed" formatoptions="force_size"
-      filesystem="xfs"
-      bootpartition="true" bootpartsize="1000" bootfilesystem="xfs" efipartsize="100" firmware="uefi"
-      kernelcmdline="rootdelay=300 console=ttyS0 earlyprintk=ttyS0  no_timer_check crashkernel=auto net.ifnames=0"
-      devicepersistency="by-uuid"
-      rootfs_label="rocky">
-      <oemconfig>
-        <oem-resize>false</oem-resize>
-      </oemconfig>
-      <bootloader name="grub2" timeout="1" bls="true"/>
-      <size unit="G">10</size>
-      <systemdisk name="rocky" preferlvm="true">
-        <volume name="@root=lvroot" size="9000M" mountpoint="/" />
-      </systemdisk>
-    </type>
-  </preferences>
-  <!-- End Azure -->
-  <!-- EC2 -->
-  <preferences profiles="Cloud-EC2-Base" arch="x86_64,aarch64">
-    <type image="oem" format="qcow2"
-      filesystem="xfs"
-      bootpartition="true" bootpartsize="1000" bootfilesystem="xfs" efipartsize="100" firmware="uefi"
-      kernelcmdline="console=ttyS0,115200n8 no_timer_check crashkernel=auto net.ifnames=0 nvme_core.io_timeout=4294967295 nvme_core.max_retries=10"
-      devicepersistency="by-uuid"
-      rootfs_label="rocky">
-      <oemconfig>
-        <oem-resize>false</oem-resize>
-      </oemconfig>
-      <bootloader name="grub2" timeout="1" bls="true"/>
-      <size unit="G">10</size>
-    </type>
-  </preferences>
-  <preferences profiles="Cloud-EC2-LVM" arch="x86_64,aarch64">
-    <type image="oem" format="qcow2"
-      filesystem="xfs"
-      bootpartition="true" bootpartsize="1000" bootfilesystem="xfs" efipartsize="100" firmware="uefi"
-      kernelcmdline="console=ttyS0,115200n8 no_timer_check crashkernel=auto net.ifnames=0 nvme_core.io_timeout=4294967295 nvme_core.max_retries=10"
-      devicepersistency="by-uuid"
-      rootfs_label="rocky">
-      <oemconfig>
-        <oem-resize>false</oem-resize>
-      </oemconfig>
-      <bootloader name="grub2" timeout="1" bls="true"/>
-      <size unit="G">10</size>
-      <systemdisk name="rocky" preferlvm="true">
-        <volume name="@root=lvroot" size="9000M" mountpoint="/" />
-      </systemdisk>
-    </type>
-  </preferences>
-  <!-- End EC2 -->
-  <!-- OCP -->
-  <preferences profiles="Cloud-OCP-Base" arch="x86_64,aarch64">
-    <type image="oem" format="qcow2"
-      filesystem="xfs"
-      bootpartition="true" bootpartsize="1000" bootfilesystem="xfs" efipartsize="100" firmware="uefi"
-      kernelcmdline="console=ttyS0,115200n8 console=tty0 no_timer_check crashkernel=auto net.ifnames=0 LANG=en_US.UTF-8 transparent_hugepage=never rd.luks=0 rd.md=0 rd.dm=0 rd.lvm.vg=rocky rd.lvm.lv=rocky/root rd.net.timeout.dhcp=10"
-      devicepersistency="by-uuid"
-      rootfs_label="rocky">
-      <oemconfig>
-        <oem-resize>false</oem-resize>
-      </oemconfig>
-      <bootloader name="grub2" timeout="1" bls="true"/>
-      <size unit="G">10</size>
-    </type>
-  </preferences>
-  <!-- End OCP -->
-  <packages type="image" patternType="plusRecommended" profiles="Core-Cloud">
-    <namedCollection name="core"/>
-    <ignore name="*-firmware"/>
-    <ignore name="alsa-lib"/>
-    <ignore name="biosdevname"/>
-    <ignore name="iprutils"/>
-    <!--<ignore name="langpacks-*"/>
-    <ignore name="langpacks-en"/>-->
-    <ignore name="plymouth"/>
-    <package name="langpacks-en"/>
-    <package name="NetworkManager"/>
-    <package name="bash"/>
-    <package name="chrony"/>
-    <package name="dnf"/>
-    <package name="cloud-init"/>
-    <package name="cloud-utils-growpart"/>
-    <package name="dracut-config-generic"/>
-    <package name="firewalld"/>
-    <package name="gdisk"/>
-    <package name="grub2" arch="x86_64,aarch64,ppc64le"/>
-    <package name="kernel"/>
-    <package name="nfs-utils"/>
-    <package name="rsync"/>
-    <package name="tar"/>
-    <package name="dnf-utils"/>
-    <package name="cockpit-system"/>
-    <package name="cockpit-ws"/>
-    <package name="dhcp-client"/>
-    <package name="python3-jsonschema"/>
-    <package name="qemu-guest-agent"/>
-    <package name="rocky-release"/>
-    <package name="rng-tools"/>
-  </packages>
-  <!-- is this needed? -->
-  <packages type="image" patternType="plusRecommended" profiles="Cloud-GenericCloud-Base,Cloud-GenericCloud-LVM">
-    <package name="qemu-guest-agent"/>
-  </packages>
-  <packages type="image" patternType="plusRecommended" profiles="Cloud-Azure-Base,Cloud-Azure-LVM">
-    <package name="WALinuxAgent"/>
-    <package name="hyperv-daemons"/>
-  </packages>
-  <packages type="image" patternType="plusRecommended" profiles="Cloud-GenericCloud-LVM,Cloud-Azure-LVM,Cloud-OCP-Base,Cloud-EC2-LVM">
-    <package name="lvm2"/>
-  </packages>
-  <!-- There isn't a way to exclude packages from a certain repo -->
-  <packages type="image" patternType="plusRecommended" profiles="Cloud-OCP-Base">
-    <package name="iscsi-initiator-utils"/>
-  </packages>
-</image>
--- a/components/boot.xml
+++ b/components/boot.xml
@ -1,25 +0,0 @@
-<image>
-  <profiles>
-    <profile name="Core-Boot" description="Boot Core Packages"/>
-  </profiles>
-  <packages type="bootstrap" patternType="plusRecommended" profiles="Core-Boot">
-    <package name="grubby"/>
-  </packages>
-  <packages type="image" patternType="plusRecommended" profiles="Core-Boot">
-    <package name="grub2-efi-aa64" arch="aarch64"/>
-    <package name="grub2-efi-aa64-modules" arch="aarch64"/>
-    <package name="grub2-efi-x64" arch="x86_64"/>
-    <package name="grub2-efi-x64-modules" arch="x86_64"/>
-    <package name="grub2-pc" arch="x86_64"/>
-    <package name="grub2-pc-modules" arch="x86_64"/>
-    <package name="grub2-ppc64le" arch="ppc64le"/>
-    <package name="s390utils-base" arch="s390x"/>
-    <package name="shim-signed-aa64" arch="aarch64"/>
-    <package name="shim-signed-x64" arch="x86_64"/>
-    <package name="kernel-core"/>
-  </packages>
-  <packages type="iso" patternType="plusRecommended" profiles="Core-Boot">
-    <package name="grub2-efi-aa64-cdboot" arch="aarch64"/>
-    <package name="grub2-efi-x64-cdboot" arch="x86_64"/>
-  </packages>
-</image>
--- a/components/live/cinnamon.xml
+++ b/components/live/cinnamon.xml
@ -1,85 +0,0 @@
-<image>
-  <profiles>
-    <profile name="Cinnamon-Desktop" description="Cinnamon Desktop">
-      <requires profile="Live-Base"/>
-    </profile>
-  </profiles>
-  <preferences profiles="Live-Base">
-    <type image="iso" publisher="Rocky Enterprise Software Foundation" volid="Rocky-9-Cinnamon" primary="true" flags="dmsquash" firmware="uefi" kernelcmdline="quiet rhgb" mediacheck="false">
-      <bootloader name="grub2" grub_template="grub.tmpl" console="console" timeout="10"/>
-    </type>
-  </preferences>
-  <packages type="image" patternType="plusRecommended" profiles="Cinnamon-Desktop">
-    <package name="epel-release"/>
-    <package name="libreoffice-calc"/>
-    <package name="libreoffice-emailmerge" arch="x86_64"/>
-    <package name="libreoffice-graphicfilter"/>
-    <package name="libreoffice-impress"/>
-    <package name="libreoffice-writer"/>
-    <package name="NetworkManager-adsl"/>
-    <package name="NetworkManager-bluetooth"/>
-    <package name="NetworkManager-l2tp-gnome"/>
-    <package name="NetworkManager-libreswan-gnome"/>
-    <package name="NetworkManager-openconnect-gnome"/>
-    <package name="NetworkManager-openvpn-gnome"/>
-    <package name="NetworkManager-ppp"/>
-    <package name="NetworkManager-pptp-gnome"/>
-    <package name="NetworkManager-wifi"/>
-    <package name="NetworkManager-wwan"/>
-    <package name="cinnamon"/>
-    <package name="cinnamon-control-center"/>
-    <package name="cinnamon-screensaver"/>
-    <package name="eom"/>
-    <package name="f36-backgrounds-extras-gnome"/>
-    <package name="f36-backgrounds-gnome"/>
-    <package name="f37-backgrounds-extras-gnome"/>
-    <package name="f37-backgrounds-gnome"/>
-    <package name="firefox"/>
-    <package name="firewall-config"/>
-    <package name="gjs"/>
-    <package name="gnome-calculator"/>
-    <package name="gnome-disk-utility"/>
-    <package name="gnome-screenshot"/>
-    <package name="gnome-system-monitor"/>
-    <package name="gnome-terminal"/>
-    <package name="gstreamer1-plugins-ugly-free"/>
-    <package name="gvfs-gphoto2"/>
-    <package name="gvfs-mtp"/>
-    <package name="gvfs-smb"/>
-    <package name="hexchat"/>
-    <package name="imsettings-systemd"/>
-    <package name="initial-setup-gui"/>
-    <package name="lightdm"/>
-    <package name="metacity"/>
-    <package name="nemo-fileroller"/>
-    <package name="nemo-image-converter"/>
-    <package name="nemo-preview"/>
-    <package name="nm-connection-editor"/>
-    <package name="parole"/>
-    <package name="pipewire-alsa"/>
-    <package name="pipewire-pulseaudio"/>
-    <package name="powerline"/>
-    <package name="redshift-gtk"/>
-    <package name="rocky-backgrounds"/>
-    <package name="sane-backends-drivers-scanners"/>
-    <package name="setroubleshoot"/>
-    <package name="slick-greeter"/>
-    <package name="slick-greeter-cinnamon"/>
-    <package name="thunderbird"/>
-    <package name="tmux"/>
-    <package name="tmux-powerline"/>
-    <package name="transmission"/>
-    <package name="vim-enhanced"/>
-    <package name="vim-powerline"/>
-    <package name="wireplumber"/>
-    <package name="xdg-user-dirs-gtk"/>
-    <package name="xed"/>
-    <package name="xreader"/>
-    <!-- ignores for space and other things -->
-    <ignore name="isdn4k-utils"/>
-    <ignore name="hplip"/>
-    <ignore name="mpage"/>
-    <ignore name="xsane"/>
-    <ignore name="xsane-gimp"/>
-  </packages>
-</image>
--- a/components/live/common.xml
+++ b/components/live/common.xml
@ -1,66 +0,0 @@
-<image>
-  <profiles>
-    <profile name="Live-Base" description="Rocky Linux Live Install Image">
-      <requires profile="Core-Boot"/>
-    </profile>
-  </profiles>
-  <packages type="iso" patternType="plusRecommended" profiles="Live-Base">
-    <namedCollection name="anaconda-tools"/>
-    <namedCollection name="base-x"/>
-    <namedCollection name="core"/>
-    <namedCollection name="dial-up"/>
-    <namedCollection name="fonts"/>
-    <namedCollection name="guest-desktop-agents"/>
-    <namedCollection name="hardware-support"/>
-    <namedCollection name="input-methods"/>
-    <namedCollection name="multimedia"/>
-    <namedCollection name="standard"/>
-    <!-- SB -->
-    <package name="shim-x64" arch="x86_64"/>
-    <package name="shim-aa64" arch="aarch64"/>
-    <!-- Base Package Set -->
-    <package name="aajohan-comfortaa-fonts"/>
-    <package name="anaconda"/>
-    <package name="anaconda-install-env-deps"/>
-    <package name="anaconda-live"/>
-    <package name="chkconfig"/>
-    <package name="dracut-live"/>
-    <package name="efi-filesystem"/>
-    <package name="efivar-libs" arch="x86_64,aarch64"/>
-    <package name="efibootmgr" arch="x86_64,aarch64"/>
-    <package name="glibc-all-langpacks"/>
-    <package name="grub2-common"/>
-    <package name="grub2-tools"/>
-    <package name="grub2-tools-extra"/>
-    <package name="grub2-tools-minimal"/>
-    <package name="kernel"/>
-    <package name="kernel-modules"/>
-    <package name="kernel-modules-extra"/>
-    <package name="initscripts"/>
-    <package name="livesys-scripts"/>
-    <!-- x86_64 -->
-    <package name="grub2-efi-x64" arch="x86_64"/>
-    <package name="grub2-efi-x64-cdboot" arch="x86_64"/>
-    <package name="grub2-pc-modules" arch="x86_64"/>
-    <package name="grub2-tools-efi" arch="x86_64"/>
-    <package name="memtest86+" arch="x86_64"/>
-    <package name="syslinux" arch="x86_64"/>
-    <!-- aarch64 -->
-    <package name="grub2-efi-aa64" arch="aarch64"/>
-    <package name="grub2-efi-aa64-cdboot" arch="aarch64"/>
-    <!-- ppc64le -->
-    <package name="grub2-ppc64le" arch="ppc64le"/>
-    <package name="grub2-ppc64le-modules" arch="ppc64le"/>
-    <package name="librtas" arch="ppc64le"/>
-    <package name="libservicelog" arch="ppc64le"/>
-    <package name="libvpd" arch="ppc64le"/>
-    <package name="lsvpd" arch="ppc64le"/>
-    <package name="opal-prd" arch="ppc64le"/>
-    <package name="ppc64-diag" arch="ppc64le"/>
-    <package name="ppc64-diag-rtas" arch="ppc64le"/>
-    <package name="powerpc-utils" arch="ppc64le"/>
-    <package name="powerpc-utils-core" arch="ppc64le"/>
-    <!-- ignores -->
-    <ignore name="shim-unsigned-*64"/>
-  </packages>
-</image>
--- a/components/live/kde.xml
+++ b/components/live/kde.xml
@ -1,46 +0,0 @@
-<image>
-  <profiles>
-    <profile name="KDE-Desktop" description="KDE Desktop">
-      <requires profile="Live-Base"/>
-    </profile>
-  </profiles>
-  <preferences profiles="Live-Base">
-    <type image="iso" publisher="Rocky Enterprise Software Foundation" volid="Rocky-9-KDE" primary="true" flags="dmsquash" firmware="uefi" kernelcmdline="quiet rhgb" mediacheck="false">
-      <bootloader name="grub2" grub_template="grub.tmpl" console="console" timeout="10"/>
-    </type>
-  </preferences>
-  <packages type="image" patternType="plusRecommended" profiles="KDE-Desktop">
-    <package name="epel-release"/>
-    <namedCollection name="fuse"/>
-    <namedCollection name="gjs"/>
-    <namedCollection name="internet-browser"/>
-    <namedCollection name="kde-desktop-environment"/>
-    <namedCollection name="kde-apps"/>
-    <namedCollection name="kde-media"/>
-    <package name="libreoffice-calc"/>
-    <package name="libreoffice-emailmerge" arch="x86_64"/>
-    <package name="libreoffice-graphicfilter"/>
-    <package name="libreoffice-impress"/>
-    <package name="libreoffice-writer"/>
-    <package name="mariadb-embedded"/>
-    <package name="mariadb-connector-c"/>
-    <package name="mariadb-server"/>
-    <package name="rocky-backgrounds-kde"/>
-    <package name="sddm"/>
-    <package name="sddm-breeze"/>
-    <package name="sddm-themes"/>
-    <package name="sddm-kcm"/>
-    <!-- ignores for space and other things -->
-    <ignore name="desktop-backgrounds-basic"/>
-    <ignore name="gnome-disk-utility"/>
-    <ignore name="hplip"/>
-    <ignore name="iok"/>
-    <ignore name="isdn4k-utils"/>
-    <ignore name="kdeaccessibility"/>
-    <ignore name="mpage"/>
-    <ignore name="system-config-printer"/>
-    <ignore name="system-config-services"/>
-    <ignore name="system-config-users"/>
-    <ignore name="xsane"/>
-  </packages>
-</image>
--- a/components/live/mate.xml
+++ b/components/live/mate.xml
@ -1,144 +0,0 @@
-<image>
-  <profiles>
-    <profile name="MATE-Desktop" description="MATE Desktop">
-      <requires profile="Live-Base"/>
-    </profile>
-  </profiles>
-  <preferences profiles="Live-Base">
-    <type image="iso" publisher="Rocky Enterprise Software Foundation" volid="Rocky-9-MATE" primary="true" flags="dmsquash" firmware="uefi" kernelcmdline="quiet rhgb" mediacheck="false">
-      <bootloader name="grub2" grub_template="grub.tmpl" console="console" timeout="10"/>
-    </type>
-  </preferences>
-  <packages type="image" patternType="plusRecommended" profiles="MATE-Desktop">
-    <package name="NetworkManager-adsl"/>
-    <package name="NetworkManager-bluetooth"/>
-    <package name="NetworkManager-l2tp-gnome"/>
-    <package name="NetworkManager-libreswan-gnome"/>
-    <package name="NetworkManager-openconnect-gnome"/>
-    <package name="NetworkManager-openvpn-gnome"/>
-    <package name="NetworkManager-ovs"/>
-    <package name="NetworkManager-ppp"/>
-    <package name="NetworkManager-pptp-gnome"/>
-    <package name="NetworkManager-team"/>
-    <package name="NetworkManager-wifi"/>
-    <package name="NetworkManager-wwan"/>
-    <package name="atril"/>
-    <package name="atril-caja"/>
-    <package name="atril-thumbnailer"/>
-    <package name="caja"/>
-    <package name="caja-actions"/>
-    <package name="dconf-editor"/>
-    <package name="engrampa"/>
-    <package name="eom"/>
-    <package name="epel-release"/>
-    <package name="f36-backgrounds-extras-mate"/>
-    <package name="f36-backgrounds-mate"/>
-    <package name="f37-backgrounds-extras-mate"/>
-    <package name="f37-backgrounds-mate"/>
-    <package name="filezilla"/>
-    <package name="firefox"/>
-    <package name="firewall-applet"/>
-    <package name="firewall-config"/>
-    <package name="gjs"/>
-    <package name="gnome-disk-utility"/>
-    <package name="gnome-epub-thumbnailer"/>
-    <package name="gnome-themes-extra"/>
-    <package name="gparted"/>
-    <package name="gstreamer1-plugins-ugly-free"/>
-    <package name="gtk2-engines"/>
-    <package name="gucharmap"/>
-    <package name="gvfs-fuse"/>
-    <package name="gvfs-gphoto2"/>
-    <package name="gvfs-mtp"/>
-    <package name="gvfs-smb"/>
-    <package name="hexchat" arch="x86_64"/>
-    <package name="initial-setup-gui"/>
-    <package name="libmatekbd"/>
-    <package name="libmatemixer"/>
-    <package name="libmateweather"/>
-    <package name="libreoffice-calc"/>
-    <package name="libreoffice-emailmerge" arch="x86_64"/>
-    <package name="libreoffice-graphicfilter"/>
-    <package name="libreoffice-impress"/>
-    <package name="libreoffice-writer"/>
-    <package name="libsecret"/>
-    <package name="lightdm"/>
-    <package name="lm_sensors"/>
-    <package name="marco"/>
-    <package name="mate-applets"/>
-    <package name="mate-backgrounds"/>
-    <package name="mate-calc"/>
-    <package name="mate-control-center"/>
-    <package name="mate-desktop"/>
-    <package name="mate-dictionary"/>
-    <package name="mate-disk-usage-analyzer"/>
-    <package name="mate-icon-theme"/>
-    <package name="mate-media"/>
-    <package name="mate-menu"/>
-    <package name="mate-menus"/>
-    <package name="mate-menus-preferences-category-menu"/>
-    <package name="mate-notification-daemon"/>
-    <package name="mate-panel"/>
-    <package name="mate-polkit"/>
-    <package name="mate-power-manager"/>
-    <package name="mate-screensaver"/>
-    <package name="mate-screenshot"/>
-    <package name="mate-search-tool"/>
-    <package name="mate-sensors-applet"/>
-    <package name="mate-session-manager"/>
-    <package name="mate-settings-daemon"/>
-    <package name="mate-system-log"/>
-    <package name="mate-system-monitor"/>
-    <package name="mate-terminal"/>
-    <package name="mate-themes"/>
-    <package name="mate-user-admin"/>
-    <package name="mate-user-guide"/>
-    <package name="mate-utils"/>
-    <package name="mozo"/>
-    <package name="network-manager-applet"/>
-    <package name="nm-connection-editor"/>
-    <package name="orca"/>
-    <package name="p7zip"/>
-    <package name="p7zip-plugins"/>
-    <package name="parole"/>
-    <package name="pavucontrol"/>
-    <package name="pipewire-alsa"/>
-    <package name="pipewire-pulseaudio"/>
-    <package name="pluma"/>
-    <package name="pluma-plugins"/>
-    <package name="rocky-backgrounds"/>
-    <package name="rocky-backgrounds-compat"/>
-    <package name="rocky-release"/>
-    <package name="seahorse"/>
-    <package name="seahorse-caja"/>
-    <package name="setroubleshoot"/>
-    <package name="slick-greeter-mate"/>
-    <package name="thunderbird"/>
-    <package name="tigervnc"/>
-    <package name="usermode-gtk"/>
-    <package name="vim-enhanced"/>
-    <package name="wireplumber"/>
-    <package name="xdg-user-dirs-gtk"/>
-    <package name="xmodmap"/>
-    <package name="xrdb"/>
-    <package name="yelp"/>
-    <!-- ignores for space and other things -->
-    <ignore name="audacious"/>
-    <ignore name="brasero"/>
-    <ignore name="evolution-help"/>
-    <ignore name="fedora-icon-theme"/>
-    <ignore name="gnome-icon-theme"/>
-    <ignore name="gnome-icon-theme-symbolic"/>
-    <ignore name="gnome-logs"/>
-    <ignore name="gnome-software"/>
-    <ignore name="gnome-user-docs"/>
-    <ignore name="hplip"/>
-    <ignore name="isdn4k-utils"/>
-    <ignore name="mpage"/>
-    <ignore name="sane-backends"/>
-    <ignore name="systemd-oom-defaults"/>
-    <ignore name="telnet"/>
-    <ignore name="xsane"/>
-    <ignore name="xsane-gimp"/>
-  </packages>
-</image>
--- a/components/live/workstation-lite.xml
+++ b/components/live/workstation-lite.xml
@ -1,22 +0,0 @@
-<image>
-  <profiles>
-    <profile name="Workstation-Lite-Desktop" description="Workstation-Lite Desktop">
-      <requires profile="Live-Base"/>
-    </profile>
-  </profiles>
-  <preferences profiles="Live-Base">
-    <type image="iso" publisher="Rocky Enterprise Software Foundation" volid="Rocky-9-Workstation-Lite" primary="true" flags="dmsquash" firmware="uefi" kernelcmdline="quiet rhgb" mediacheck="false">
-      <bootloader name="grub2" grub_template="grub.tmpl" console="console" timeout="10"/>
-    </type>
-  </preferences>
-  <packages type="image" patternType="plusRecommended" profiles="Workstation-Lite-Desktop">
-    <namedCollection name="gnome-desktop"/>
-    <namedCollection name="internet-browser"/>
-    <namedCollection name="networkmanager-submodules"/>
-    <package name="libreoffice-calc"/>
-    <package name="libreoffice-writer"/>
-    <!-- ignores for space and other things -->
-    <ignore name="gfs2-utils"/>
-    <ignore name="reiserfs-utils"/>
-  </packages>
-</image>
--- a/components/live/workstation.xml
+++ b/components/live/workstation.xml
@ -1,26 +0,0 @@
-<image>
-  <profiles>
-    <profile name="Workstation-Desktop" description="Workstation Desktop">
-      <requires profile="Live-Base"/>
-    </profile>
-  </profiles>
-  <preferences profiles="Live-Base">
-    <type image="iso" publisher="Rocky Enterprise Software Foundation" volid="Rocky-9-Workstation" primary="true" flags="dmsquash" firmware="uefi" kernelcmdline="quiet rhgb" mediacheck="false">
-      <bootloader name="grub2" grub_template="grub.tmpl" console="console" timeout="10"/>
-    </type>
-  </preferences>
-  <packages type="image" patternType="plusRecommended" profiles="Workstation-Desktop">
-    <namedCollection name="gnome-desktop"/>
-    <namedCollection name="internet-browser"/>
-    <namedCollection name="networkmanager-submodules"/>
-    <namedCollection name="workstation-product"/>
-    <package name="libreoffice-calc"/>
-    <package name="libreoffice-emailmerge" arch="x86_64"/>
-    <package name="libreoffice-graphicfilter"/>
-    <package name="libreoffice-impress"/>
-    <package name="libreoffice-writer"/>
-    <!-- ignores for space and other things -->
-    <ignore name="gfs2-utils"/>
-    <ignore name="reiserfs-utils"/>
-  </packages>
-</image>
--- a/components/live/xfce.xml
+++ b/components/live/xfce.xml
@ -1,77 +0,0 @@
-<image>
-  <profiles>
-    <profile name="XFCE-Desktop" description="XFCE Desktop">
-      <requires profile="Live-Base"/>
-    </profile>
-  </profiles>
-  <preferences profiles="Live-Base">
-    <type image="iso" publisher="Rocky Enterprise Software Foundation" volid="Rocky-9-XFCE" primary="true" flags="dmsquash" firmware="uefi" kernelcmdline="quiet rhgb" mediacheck="false">
-      <bootloader name="grub2" grub_template="grub.tmpl" console="console" timeout="10"/>
-    </type>
-  </preferences>
-  <packages type="image" patternType="plusRecommended" profiles="XFCE-Desktop">
-    <!-- Equivalent to @xfce-desktop nodefaults -->
-    <package name="Thunar"/>
-    <package name="xfce4-panel"/>
-    <package name="xfce4-session"/>
-    <package name="xfce4-settings"/>
-    <package name="xfconf"/>
-    <package name="xfdesktop"/>
-    <package name="xfwm4"/>
-    <package name="epel-release"/>
-    <package name="firefox"/>
-    <package name="firewall-config"/>
-    <package name="gjs"/>
-    <package name="gparted"/>
-    <package name="gparted"/>
-    <package name="lightdm"/>
-    <package name="network-manager-applet"/>
-    <package name="openssh-askpass"/>
-    <package name="pavucontrol"/>
-    <package name="pcp-selinux"/>
-    <package name="rocky-backgrounds"/>
-    <package name="rocky-backgrounds-compat"/>
-    <package name="rocky-release"/>
-    <package name="seahorse"/>
-    <package name="thunar-archive-plugin"/>
-    <package name="thunar-volman"/>
-    <package name="thunderbird"/>
-    <package name="tumbler"/>
-    <package name="wget"/>
-    <package name="xdg-user-dirs"/>
-    <package name="xdg-user-dirs-gtk"/>
-    <package name="xfce-polkit"/>
-    <package name="xfce4-about"/>
-    <package name="xfce4-appfinder"/>
-    <package name="xfce4-datetime-plugin"/>
-    <package name="xfce4-netload-plugin"/>
-    <package name="xfce4-notifyd"/>
-    <package name="xfce4-panel-profiles"/>
-    <package name="xfce4-power-manager"/>
-    <package name="xfce4-screensaver"/>
-    <package name="xfce4-screenshooter-plugin"/>
-    <package name="xfce4-smartbookmark-plugin"/>
-    <package name="xfce4-systemload-plugin"/>
-    <package name="xfce4-taskmanager"/>
-    <package name="xfce4-terminal"/>
-    <package name="xfce4-time-out-plugin"/>
-    <package name="xfce4-weather-plugin"/>
-    <package name="xfce4-whiskermenu-plugin"/>
-    <!-- ignores for space and other things -->
-    <ignore name="acpid"/>
-    <ignore name="aspell-*"/>
-    <ignore name="autofs"/>
-    <ignore name="desktop-backgrounds-basic"/>
-    <ignore name="gdm"/>
-    <ignore name="gimp-help"/>
-    <ignore name="gnome-shell"/>
-    <ignore name="hplip"/>
-    <ignore name="isdn4k-utils"/>
-    <ignore name="mpage"/>
-    <ignore name="sane-backends"/>
-    <ignore name="xfce4-eyes-plugin"/>
-    <ignore name="xfce4-sensors-plugin"/>
-    <ignore name="xsane"/>
-    <ignore name="xsane-gimp"/>
-  </packages>
-</image>
--- a/components/users.xml
+++ b/components/users.xml
@ -1,12 +0,0 @@
-<image>
-  <users profiles="Cloud-Azure-Base,Cloud-Azure-LVM,Cloud-EC2-Base,Cloud-EC2-LVM,Cloud-GenericCloud-Base,Cloud-GenericCloud-LVM,Cloud-OCP-Base,Live-Base">
-    <user name="root" groups="root" password="linux" home="/root" pwdformat="plain" />
-  </users>
-  <!--  <users profiles="Cloud-Azure-Base,Cloud-Azure-LVM,Cloud-EC2-Base,Cloud-EC2-LVM,Cloud-GenericCloud-Base,Cloud-GenericCloud-LVM,Cloud-OCP-Base">
-    <user name="rocky" groups="rocky,wheel" password="thereisnopassword" home="/home/rocky" pwdformat="encrypted" />
-  </users> -->
-  <!-- Only for SBC -->
-  <users profiles="Core-Pi,CoreSBC">
-    <user password="$6$ggstAnji$tPNhSHa/OG4UrJ0P77ZHlCunu.pueMXtXgAER51mTJ7bpXl/onDplJXd0usMSlFP4gOn/A7BM7cGoVw/WcCKS." home="/home/rocky" name="rocky" groups="rocky,wheel"/>
-  </users>
-</image>
--- a/config.sh
+++ b/config.sh
@ -1,890 +0,0 @@
-#!/bin/bash
-
-set -euxo pipefail
-
-#======================================
-# Functions...
-#--------------------------------------
-test -f /.kconfig && . /.kconfig
-test -f /.profile && . /.profile
-
-#======================================
-# Greeting...
-#--------------------------------------
-echo "Configure image: [$kiwi_iname]-[$kiwi_profiles]..."
-
-################################################################################
-# ALL OF OUR FUNCTIONS
-function common_live_steps() {
-  # this isn't needed in our testing, but we'll put it here just in case
-  systemctl set-default graphical.target
-  systemctl enable livesys.service livesys-late.service
-  systemctl enable tmp.mount
-  cat >> /etc/fstab << EOF
-vartmp   /var/tmp    tmpfs   defaults   0  0
-EOF
-  rm -f /var/lib/rpm/__db*
-  majorver=$(rpm --eval '%{rhel}')
-  rpm --import "/etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-${majorver}"
-  rm -f /var/lib/rpm/__db*
-  /usr/bin/mandb
-  rm -f /core*
-  rm -f /boot/*-rescue*
-}
-
-function live_gnome_steps() {
-  sed -i 's/^livesys_session=.*/livesys_session="gnome"/' /etc/sysconfig/livesys
-}
-
-function live_kde_steps() {
-  sed -i 's/^livesys_session=.*/livesys_session="kde"/' /etc/sysconfig/livesys
-  cat > /root/.gtkrc-2.0 << EOF
-include "/usr/share/themes/Adwaita/gtk-2.0/gtkrc"
-include "/etc/gtk-2.0/gtkrc"
-gtk-theme-name="Adwaita"
-EOF
-  mkdir -p /root/.config/gtk-3.0
-cat > /root/.config/gtk-3.0/settings.ini << EOF
-[Settings]
-gtk-theme-name = Adwaita
-EOF
-
-  rm -f /usr/share/wallpapers/Fedora
-  ln -s rocky-abstract-2 /usr/share/wallpapers/Fedora
-
-  systemctl enable --force sddm.service
-
-  cat > /etc/sddm.conf.d/theme.conf <<THEMEEOF
-[Theme]
-Current=breeze
-THEMEEOF
-}
-
-function live_cinnamon_steps() {
-  sed -i 's/^livesys_session=.*/livesys_session="cinnamon"/' /etc/sysconfig/livesys
-  cat > /etc/sysconfig/desktop <<EOF
-PREFERRED=/usr/bin/cinnamon-session
-DISPLAYMANAGER=/usr/sbin/lightdm
-EOF
-  systemctl enable --force lightdm.service
-}
-
-function live_mate_steps() {
-  sed -i 's/^livesys_session=.*/livesys_session="mate"/' /etc/sysconfig/livesys
-  systemctl enable --force lightdm.service
-}
-
-function live_xfce_steps() {
-  sed -i 's/^livesys_session=.*/livesys_session="xfce"/' /etc/sysconfig/livesys
-  systemctl enable --force lightdm.service
-  cat > /etc/sysconfig/desktop <<EOF
-PREFERRED=/usr/bin/startxfce4
-DISPLAYMANAGER=/usr/sbin/lightdm
-EOF
-
-    # set default background
-  cat > /etc/xdg/xfce4/xfconf/xfce-perchannel-xml/xfce4-desktop.xml <<XFCEEOF
-<?xml version="1.0" encoding="UTF-8"?>
-
-<channel name="xfce4-desktop" version="1.0">
-  <property name="backdrop" type="empty">
-    <property name="screen0" type="empty">
-      <property name="monitor0" type="empty">
-        <property name="color-style" type="int" value="0"/>
-        <property name="image-style" type="int" value="5"/>
-        <property name="last-image" type="string" value="/usr/share/backgrounds/rocky-default-9-abstract-2-day.png"/>
-        <property name="last-single-image" type="string" value="/usr/share/backgrounds/rocky-default-9-abstract-2-day.png"/>
-        <property name="image-path" type="string" value="/usr/share/backgrounds/rocky-default-9-abstract-2-day.png"/>
-      </property>
-    </property>
-  </property>
-</channel>
-XFCEEOF
-}
-
-function epel_de_steps() {
-  dnf config-manager --set-enabled crb
-}
-
-# live fixes if we need them
-function live_fixes() {
-  sed -i "s/org.fedoraproject.AnacondaInstaller/anaconda/" /usr/share/applications/liveinst.desktop
-}
-
-function common_cloud_steps() {
-  # This can be done via systemctl set-default, but sometimes it doesn't work.
-  # systemctl set-default multi-user.target
-  rm -f /etc/systemd/system/default.target
-  ln -s /lib/systemd/system/multi-user.target /etc/systemd/system/default.target
-
-  # chrony should already be enabled, let's make sure
-  systemctl enable chronyd
-  # make a persistent journal
-  mkdir -p /var/log/journal
-
-  dnf -C -y remove linux-firmware avahi\*
-  dnf -C -y remove firewalld --setopt="clean_requirements_on_remove=1"
-  dnf -C -y remove langpacks-*
-  sed -i '/^#NAutoVTs=.*/ a\
-NAutoVTs=0' /etc/systemd/logind.conf
-  truncate -s 0 /etc/resolv.conf
-  if [ -f /etc/tuned/active_profile ]; then
-    echo "virtual-guest" > /etc/tuned/active_profile
-  fi
-  rm -f /etc/udev/rules.d/70*
-  ln -s /dev/null /etc/udev/rules.d/80-net-name-slot.rules
-  cat > /etc/sysconfig/network << EOF
-NETWORKING=yes
-NOZEROCONF=yes
-EOF
-  cat > /etc/hosts << EOF
-127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
-::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
-
-EOF
-
-  echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
-
-  echo -e 'rocky\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers
-  sed -i '1i # Modified for cloud image' /etc/cloud/cloud.cfg
-  sed -i 's/name: cloud-user/name: rocky/g' /etc/cloud/cloud.cfg
-}
-
-################################################################################
-# Azure
-function azure_cloud_steps() {
-  echo 'azure' > /etc/dnf/vars/infra
-  cat << EOF | tee -a /etc/NetworkManager/conf.d/dhcp-timeout.conf
-# Configure dhcp timeout to 300s by default
-[connection]
-ipv4.dhcp-timeout=300
-EOF
-  systemctl enable waagent
-  sed -i 's/Provisioning.UseCloudInit=n/Provisioning.UseCloudInit=y/g' /etc/waagent.conf
-  sed -i 's/Provisioning.Enabled=y/Provisioning.Enabled=n/g' /etc/waagent.conf
-  cat << EOF | tee -a /etc/udev/rules.d/68-azure-sriov-nm-unmanaged.rules
-# Accelerated Networking on Azure exposes a new SRIOV interface to the VM.
-# This interface is transparently bonded to the synthetic interface,
-# so NetworkManager should just ignore any SRIOV interfaces.
-SUBSYSTEM=="net", DRIVERS=="hv_pci", ACTION=="add", ENV{NM_UNMANAGED}="1"
-EOF
-
-  cat << EOF | tee -a /etc/udev/rules.d/98-hyperv-ptp.rules
-## See: https://docs.microsoft.com/en-us/azure/virtual-machines/linux/time-sync#check-for-ptp-clock-source
-SUBSYSTEM=="ptp", ATTR{clock_name}=="hyperv", SYMLINK += "ptp_hyperv"
-EOF
-
-  cat << EOF | tee -a /etc/chrony.conf
-# Setup hyperv PTP device as refclock
-refclock PHC /dev/ptp_hyperv poll 3 dpoll -2 offset 0 stratum 2
-EOF
-
-  cat << EOF | tee -a /etc/modprobe.d/azure-blacklist.conf
-blacklist amdgpu
-blacklist nouveau
-blacklist radeon
-EOF
-
-  cat << EOF | tee /etc/cloud/cloud.cfg.d/10-azure-kvp.cfg
-# Enable logging to the Hyper-V kvp in Azure
-reporting:
-  logging:
-    type: log
-  telemetry:
-    type: hyperv
-EOF
-
-  cat << EOF | tee -a /etc/dracut.conf.d/80-azure.conf
-add_drivers+=" hv_vmbus hv_netvsc hv_storvsc "
-EOF
-
-  #dracut -f -v
-}
-
-################################################################################
-# EC2
-function ec2_cloud_steps() {
-  echo 'ec2' > /etc/dnf/vars/infra
-  cat  >> /etc/dhcp/dhclient.conf << EOF
-timeout 300;
-retry 60;
-EOF
-
-  if [ -f /boot/grub2/grub.conf ]; then
-    sed -i -e 's/ rhgb quiet//' /boot/grub2/grub.conf
-  fi
-    sed -i -e 's/ rhgb quiet//' /etc/default/grub
-  cat > /etc/modprobe.d/blacklist-nouveau.conf << EOL
-blacklist nouveau
-EOL
-
-  cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
-DEVICE="eth0"
-ONBOOT="yes"
-BOOTPROTO="dhcp"
-TYPE="Ethernet"
-USERCTL="no"
-PEERDNS="yes"
-IPV6INIT="no"
-PERSISTENT_DHCLIENT="1"
-EOF
-
-  echo 'install_items+=" sgdisk "' > /etc/dracut.conf.d/sgdisk.conf
-  echo 'add_drivers+=" xen-netfront xen-blkfront "' > /etc/dracut.conf.d/xen.conf
-  #KERNEL_VERSION=$(rpm -q kernel --qf '%{V}-%{R}.%{arch}\n')
-  #dracut -f /boot/initramfs-$KERNEL_VERSION.img $KERNEL_VERSION
-
-  cat >> /etc/chrony.conf << EOF
-# Amazon Time Sync Service
-server 169.254.169.123 prefer iburst minpoll 4 maxpoll 4
-EOF
-}
-
-################################################################################
-# Generic Cloud (genclo)
-function genclo_cloud_steps() {
-  echo 'genclo' > /etc/dnf/vars/infra
-  cat  >> /etc/dhcp/dhclient.conf << EOF
-timeout 300;
-retry 60;
-EOF
-
-  cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
-DEVICE="eth0"
-ONBOOT="yes"
-BOOTPROTO="dhcp"
-BOOTPROTOV6="dhcp"
-TYPE="Ethernet"
-USERCTL="no"
-PEERDNS="yes"
-IPV6INIT="yes"
-PERSISTENT_DHCLIENT="1"
-EOF
-}
-
-################################################################################
-# OCP
-function ocp_cloud_steps() {
-  cat  >> /etc/dhcp/dhclient.conf << EOF
-timeout 300;
-retry 60;
-EOF
-
-  cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
-DEVICE="eth0"
-ONBOOT="yes"
-BOOTPROTO="dhcp"
-TYPE="Ethernet"
-USERCTL="no"
-PEERDNS="yes"
-IPV6INIT="no"
-PERSISTENT_DHCLIENT="1"
-EOF
-
-  # OCI - Import repo GPG key
-  cat <<EOF > /tmp/key
-----BEGIN PGP PUBLIC KEY BLOCK-----
-
-mQINBGHncu8BEAC2dhocMZkdapnP9o/MvAnKOczaSpF4Cj9yqt49bxLPJCY57jz9
-2ZkJ5iGk6kpBt4rPTh18aAl30T+nPP8VMQjMhvHJKfZmBtaJJ5RpvvpK5mj1UgRJ
-4DQX7gqAbT0s/uZZcouZsJzXo3c7GNMrim1C+ScfGG6BoB6GVBK74jFeJNMsxZ2Y
-BwQhpE+KG+1zD94RZCySykJjNoKj+U4W5H2XdB/mNEc8icFqxjJGZ5BN0DA2Wqxn
-mwELTO3Q2ne1y9+sPn2YKhRqyihuZYaUPR/Jpdki93mk61MdaoTTxFPZ8FWAYrAW
-9KVdreT8K33SaTFFpmhbpndPEYesgCqDqiZG7Ywjgbf2nqSOzBr2ZX23PX7QUCvQ
-ar58bNbWENLhC3B950TK+r23kkPa3GICE9WP5TftWJdbJMWRBX3YhdNooNGGCbeB
-xM7B/UV9hSRx1S/US8HvDhJezZDuKrpPXrNWJTuW9Kty2WGwUkEDT2GBbcjx9ocJ
-fqyNJKhaLoYKCVlsmhJUi4xCY0CDDapekWLZOzHB2zgT49uIjawV5ex6pA7oLaPI
-hQGvTcCl7GFWOP/6feazzIpnsJ4V3B2DoLnAevpZlINo/bi3Hv/YmbvE6NyYzD6c
-1y90pc0+Om1trLPCAZpaO1I369ZhLl6T/mCd92hrCG1y8K3PFiRIKpEMVwARAQAB
-tDVPcmFjbGUgTGludXggKHJlbGVhc2Uga2V5IDEpIDxzZWNhbGVydF91c0BvcmFj
-bGUuY29tPokCVAQTAQoAPhYhBD5tgm0/urOJwvOONLxNBqCNi3VvBQJinlnsAhsD
-BQklmAYABQsJCAcCBhUKCQgLAgQWAgMBAh4BAheAAAoJELxNBqCNi3Vv3LEP/2au
-kXzbdA/T/7i+4AbGFfYnTWqmZy58wfteDNy1sk6cPmfOUqZQXUrJcSGqqeIDjPvl
-KNExpee/Ja4NGg2YfzkwH5IK5sXmEDKObXRCXGZh9/WyYpr4TBoDU2rSYBP4sbKm
-PsnVoRalt2Zb0qbQF8GilytoRabjI0gLzwhmoHBZMMc3MIO14KQ5yFbekaJZKcxE
-BxaDQ1NDZV1rOVbkg0yDLS9Nw89dDYWVn1wx0foRJcD277ExvmaB4vmC5yayo4ss
-cFldYLu7W9FHmh46flXQGfduORCbDFfjn92eB0jdrkuoEhVRpljAtMO15GMpuVbv
-HzbImI2f1MfydOa6dHbRAlzeV37fPz+1nO9IWdXqFeRG0nrH2gB02AfeoObMkK/a
-XYT9sq1mC5DaK6fbOPWlY+c2hIq0BhUpe+OBdDfmm7L+si9Ffj2sUdn4sHLN6Tj7
-BrJuWmJEz42+rblDNBkrdBC6XXDaRYILKSuGD65PVV+/pVl1c2EOqcktW00iiehb
-eLhj2sz6NaoO5Rhx0J3pMsaCaEBAm8P6UxQSx4iGhZ8Kh5O1SVVlqu3xOhSGOKRE
-sS8gIjeV/Jl3frR4eZG/BpzdTjKZmQV7dvJ4gDuDE+X7rZBzUm7nggyE2pV6UbTD
-5Qwy+ASQfYHfHK4lsHD4kbO/We6H1fEFPlzlr14UuQINBGHncu8BEADBG52gWRob
-VEsQIzAfq2obFnwMroxMupXrDBka7i6cUJw8HsqyHs9maGxAuRDlAma2MBPUYcbm
-DH3bmctaUR7CA1RouPkb6qbZXwSwpvgN4eh4naPX20/VEp/cd5DhKWjP9yC70weh
-r4LmGWV41jBAMK0G1l6+FDw2ITgsamZP+tw0swCKqzpIY2waiygCtPHCCCFMuZ6S
-7hzQpsKVFh8zqzRxMs6Mni9olk4+xwng0ahYfoe2esByR2M1kGX62Y6BOcIRX1cE
-zYFCUww5GrjZdJoObBtffUSz+q2LNOBcqg5huRd8BoC+k5yrXUq8ypspfV1kNEI3
-/ebFew6A8sdf2c+sOdTxTu4MI5iXM1fhCC6X4lAN8w1Ga3ML+k/kgL75mH62Yyzr
-OHXNkylTDfxz9qvq6qszVfWdzVaGXRfulW5nAbAXhuX1gmgZW+M7IQ22xyWC+I60
-UcaE2l9QtHFKuekdYnekTkSUA0ghVwuw+JCQZGQbq5LqbA5TkEYuibBOJD3MZYQ5
-C3DK4KHs/3wxf2aq+Pkf3mpSscC4B0Ba5tlpJawUWqnUmGd208sfUwD20MFfHM+1
-N+M6JYCv0tC0cyAV9Jq74bAUDXLMfkGKZyAWmlPaZBMMt4WaN0r2PAKp00T6PX6x
-jTM6/aNDvNTpsaaUpMXRzH13AiJ/1SjfZwARAQABiQI8BBgBCgAmAhsMFiEEPm2C
-bT+6s4nC8440vE0GoI2LdW8FAmKeWsgFCSRtulkACgkQvE0GoI2LdW/pig//Zi0a
-bmFJKTxku0/LMI31ZaLn9gzXjv2ugmJumfXAce+nlaheCNBa+IMLQdAmrbislzLs
-qXX2+6Eqh4Q/vqGLCkElIzT9ulkgwwEp0cVF6jnXqlWHa0a/T6oAq10jRneaQFCE
-t6hweJ9KTUQufp5aAiZr/GVpBJLJ8kfOx+5eHvDj+VFlFUhpzzns/NfN5N+bthJ/
-Wbt49tzmWaWoEFA0tlwMBPO3zEh/mo5lys0GqENPs4Yb4tL82qg+SG7jHSuH2lZk
-XLLyLQ6p63VZysL9+UTBtafs5jxnTopQFIXtzAOwdtQ8o7/6hhsUchRoUy23EIHT
-J25yA2Qtb8Z/1m/G0e3lz46xHBPIs8FKSOPToCT6E1+9lomnzJPRBCCDTZO5imfX
-4N4l7BodW9nb7zEMHCi2BUM+InpSsEkQkQFs0HIRI2KHSyY30uN0pVXJLOoVQIBr
-WdUzLTTkN9w43fLpkcFXGbpU+pZvK2uksC3O+eBhIpZA9E7iZDwfEaZlUKO5kFvS
-V5f8ZM1jbEb0sOZNNNEaEhTFTl8pQPc2GqgZ3rYt9mqH5OwhzKftV9PDYulIbY+Y
-AN6eJhHj8Eu/IlxG6iYCDmF2hOVPs9aLo9zqdxbu8B6rUyVPOwfNbOR1U7WMRCYm
-4QrtLe//99hXPcFVanIxgkdslnyYf4fjdbdlmNY=
-=xpaH
-----END PGP PUBLIC KEY BLOCK-----
-----BEGIN PGP PUBLIC KEY BLOCK-----
-
-mQINBGHndDkBEACieeO8U0kcUTDMLGXGKrJ3nScZ4LN5hHSzWC1zuLPpkB0YQdik
-CrfSwodyp9LeEhaRsCSoGDc3cS5f5uGvsSUHMCZwEKjdT8LmZkF/dtvVDWawgaLS
-KjoT+AJpss+ws0d/qmwkIHeYExdvZFNdKxvvxycCNy9fNwarT4aNySW6Ax7ERDl8
-k0QSK7uvL1AaWQKSz9rX//KcLv5OXVUX3ITcwprJPD3H2yTOy4pE9gxs/qKfnP+U
-Pbb3pNaHP4PnCIQrjXhJxnH9cEJ7ef0kqBdliGPN7EObrP2uPg70WnVsXovYw/TF
-PrA4H2lvJ58RVhh3ocrSnR+SIne7Lgf1FRSrsE2mmNZAWD6rOxOzO4kUrcfv/pqZ
-f+sDs7KTFMO0noJ1Kt7JSV6xCQzeKGdOh9JxYI0/YIsquiHTF2xva3WHrpOG1sns
-xXcnrLKONisg4gEK36fjsliG4jJhcNyJaAf4sfDiTKDOE5om+BZ7kMNSrMn20wg4
-AdZJm6x8Z0OfjxGOzMQ8re4Cf73H5odrpUel7HFGXiLWtk/f4P5EjxUTznlMbNED
-gYi0H898Dz5Qfmtr97WQ8132fnKKtsPlXWNUNgJpYe+GvzmYOBAr4p5EZEWjB+q6
-EnfLDLpkaS+PbrpLCls5AnWnHjimBmlIMoO5GEsJdYLIQvVVvfKtEDJIBQARAQAB
-tDRPcmFjbGUgTGludXggKGJhY2t1cCBrZXkgMSkgPHNlY2FsZXJ0X3VzQG9yYWNs
-ZS5jb20+iQJUBBMBCgA+FiEEmCIxdZx0ZwZdDOmyp90HCItO++YFAmKewpICGwMF
-CSWYBgAFCwkIBwIGFQoJCAsCBBYCAwECHgECF4AACgkQp90HCItO++bU+w//SFOe
-RBqWoA5kP4BN9z716LpgkCllMRQsRZ0kZm8Enbe5S9ENn2T5/f6zZca3TNU6Wbit
-ryToXuOlTsWy4BqAvQhQFeschg10Xgy6/VG3p5kCY4DIPOUjlb7/1r8k0xX6m/mH
-BXBf2MCVRx/zkyeRDtD3lYHyz4cwoHEZ2NuB+CCe5WA2owVhgsRuVmjidDeOa7Q6
-61eLhAJ53OVqsUt5JpQS0KrVeYVJxCiiZnKgJMqHp26Jq0WIKtgBV3sakxhUpRUf
-6ap7mnSAdh6Ae4r1+pTKd7trkxjIqLXH9RI0d7Xm+blRQVZJL9GLaLUaSvw4sfd/
-jfqENCBwAH7D488L1yvTqPfHC2+kRuUI3GU98RULCHveCISRGLVGwh1p88+9aok3
-DoV7/BUEIGbHzg3gcx8zFO2ZKKoJ7xS+vvNLAslPvHNDFH0XOwKBqlVztJprwWtA
-H33e6fti7BMRw1vgljC8yVATBTiKXj5aw+25zi70o1fIFxpwsx5mwMmqHc634ai2
-hPWNZid0Lu3MYBd8pDCvMMMGimfecoyEZKJR2KbO+pNBn7suol5XS3pCmbF3ldMa
-Atra+HvnxNBMxFVdxsqZhr/+ovQszYNIlWSYUDLbqk33HBmvbi3IuogAyxhLdw3T
-uIjjf0acjOsSgy79ju2NpKPVtJw4BmvJRFX0Rh25Ag0EYed0OQEQAJRhf7/ZIWhZ
-LpCX2vg8B4hjsEYeRvEAPUrUMHkqCuElmDaT7g76aPG0jvbMFVU/ykEt2mIi7EhW
-s0SZknT5G8HoHJM2MirkyGB26yp4IlkPyNlc5H9nmMhY7iz/utxQps8jDS8dvxeG
-1YAJGleGywGAet9vFfrLX9Xq9efTXozJfWOsRm+y2WklS+LblftaTUurStzLXRGT
-AsBYOyVaRX/6AMu+fZt7mvoM+bOFNGxMSDIZi93wBiCKp0P2Se1YJoFHTOcQ0M6V
-Fbl91ZcImPxAOX4DHfw4iuokiHCs//wV0DLZ3qtuqN2m/kV4JE9ak//BPVn4acH1
-Z6DQIzQpY66dIyLumGuCdPhl7MFHyAeKhBtLc7gp4+sli+zNUfYwwp55rTdZ9JDR
-G2LD/P2eNnrUXEsvOzqqQy48BmzOmTdgc2vef85Z23GczwX1PyTaGnrQKkReajN0
-IxIuFpTgRQFBoPHTB1VVjSsOu7McWx4Gy2zccSrXKIskj4sOBIYBjxBAR0U4Gi5h
-OAqplVGH3x3RoRb2swkc/LLb6WV6J7REmZ0+0dAE1ShBR8GmEb4wYc5BUgYXrhEn
-hK3nmNx65jZXSAwJOZU8ETLaMoa/I/+QkgPvAJ8gyTLbMQ/xB2kMNRdisphz0jiy
-PIXWlOf6I750VtbBNPHqfe0RHbBQJAl9ABEBAAGJAjwEGAEKACYCGwwWIQSYIjF1
-nHRnBl0M6bKn3QcIi0775gUCYp7C3AUJJG4hIwAKCRCn3QcIi0775nmYD/sEI0T4
-+MHIt5EzL+vBAzAbd23U2oF9KrJP49xmrLlm7qC6ghfuUVqoKwWyE24g8T4N3cxE
-xQWTZ8drqvE2E2tyKqVMjJ5PfiZjK/3WOOIq9YZHpNKljv9KaAAf5alpvMxn6IBj
-ZUhs775JcGWWngilBN9i3OEVFcQG9tFtfKqcYf8oRLPQlqhrH0pKOymFdqdL+NFX
-G/M2LquGrvyDwnT2Cyy4p4sw639BUyA4k1hESgK9KVZTrmJPYU8hCD7kcSOY25UT
-zDERLlXUsnGU9WHm/4aZ4TCs2h2qm29jHeWjfw0U/O8f4K5MV7WcJ0ZywdOk7SSf
-jOKUetPH01l22I6JXiH0jLlBU5uA/zAxd8aPpvcYcWm2Ti+mkpIB6/XWbjnPoYHh
-JmH8r9Pih1Z4dVR7qri/mdcsTZsKzLPuD6AITafJYuRCItCbMerhvGCwBaaR0oHS
-AdpSzwKk8mrLd4BQUSM5a3E010dDeKGL4TA5ttfZJuSe7RXbi4RdDd98XHKEiU3n
-N1ethSQNvEyrh0uA1U3FZvPMcbfYZa8zO85Nz9h/TGUNfmp5CyrZUHZLmvvGTOch
-lUjaIhAGBVJQR/y7+4aC3zzkyzbKyLOL3hCk0xie4LLbfTQ5BtT4+GqEAtzwRQqZ
-RgwnCPfIai7lLNx95bdwB8U2NpY11OXsoTLZAA==
-=UWTf
-----END PGP PUBLIC KEY BLOCK-----
-EOF
-
-  rpm --import /tmp/key
-
-  # Import EPEL Key
-  cat <<EOF > /tmp/key
-----BEGIN PGP PUBLIC KEY BLOCK-----
-
-mQINBGE3mOsBEACsU+XwJWDJVkItBaugXhXIIkb9oe+7aadELuVo0kBmc3HXt/Yp
-CJW9hHEiGZ6z2jwgPqyJjZhCvcAWvgzKcvqE+9i0NItV1rzfxrBe2BtUtZmVcuE6
-2b+SPfxQ2Hr8llaawRjt8BCFX/ZzM4/1Qk+EzlfTcEcpkMf6wdO7kD6ulBk/tbsW
-DHX2lNcxszTf+XP9HXHWJlA2xBfP+Dk4gl4DnO2Y1xR0OSywE/QtvEbN5cY94ieu
-n7CBy29AleMhmbnx9pw3NyxcFIAsEZHJoU4ZW9ulAJ/ogttSyAWeacW7eJGW31/Z
-39cS+I4KXJgeGRI20RmpqfH0tuT+X5Da59YpjYxkbhSK3HYBVnNPhoJFUc2j5iKy
-XLgkapu1xRnEJhw05kr4LCbud0NTvfecqSqa+59kuVc+zWmfTnGTYc0PXZ6Oa3rK
-44UOmE6eAT5zd/ToleDO0VesN+EO7CXfRsm7HWGpABF5wNK3vIEF2uRr2VJMvgqS
-9eNwhJyOzoca4xFSwCkc6dACGGkV+CqhufdFBhmcAsUotSxe3zmrBjqA0B/nxIvH
-DVgOAMnVCe+Lmv8T0mFgqZSJdIUdKjnOLu/GRFhjDKIak4jeMBMTYpVnU+HhMHLq
-uDiZkNEvEEGhBQmZuI8J55F/a6UURnxUwT3piyi3Pmr2IFD7ahBxPzOBCQARAQAB
-tCdGZWRvcmEgKGVwZWw5KSA8ZXBlbEBmZWRvcmFwcm9qZWN0Lm9yZz6JAk4EEwEI
-ADgWIQT/itE0RZcQbs6BO5GKOHK/MihGfAUCYTeY6wIbDwULCQgHAgYVCgkICwIE
-FgIDAQIeAQIXgAAKCRCKOHK/MihGfFX/EACBPWv20+ttYu1A5WvtHJPzwbj0U4yF
-3zTQpBglQ2UfkRpYdipTlT3Ih6j5h2VmgRPtINCc/ZE28adrWpBoeFIS2YAKOCLC
-nZYtHl2nCoLq1U7FSttUGsZ/t8uGCBgnugTfnIYcmlP1jKKA6RJAclK89evDQX5n
-R9ZD+Cq3CBMlttvSTCht0qQVlwycedH8iWyYgP/mF0W35BIn7NuuZwWhgR00n/VG
-4nbKPOzTWbsP45awcmivdrS74P6mL84WfkghipdmcoyVb1B8ZP4Y/Ke0RXOnLhNe
-CfrXXvuW+Pvg2RTfwRDtehGQPAgXbmLmz2ZkV69RGIr54HJv84NDbqZovRTMr7gL
-9k3ciCzXCiYQgM8yAyGHV0KEhFSQ1HV7gMnt9UmxbxBE2pGU7vu3CwjYga5DpwU7
-w5wu1TmM5KgZtZvuWOTDnqDLf0cKoIbW8FeeCOn24elcj32bnQDuF9DPey1mqcvT
-/yEo/Ushyz6CVYxN8DGgcy2M9JOsnmjDx02h6qgWGWDuKgb9jZrvRedpAQCeemEd
-fhEs6ihqVxRFl16HxC4EVijybhAL76SsM2nbtIqW1apBQJQpXWtQwwdvgTVpdEtE
-r4ArVJYX5LrswnWEQMOelugUG6S3ZjMfcyOa/O0364iY73vyVgaYK+2XtT2usMux
-VL469Kj5m13T6w==
-=Mjs/
-----END PGP PUBLIC KEY BLOCK-----
-EOF
-
-  rpm --import /tmp/key
-  # remove these for debugging
-  if [ -f /boot/grub2/grub.conf ]; then
-    sed -i -e 's/ rhgb quiet//' /boot/grub2/grub.conf
-  fi
-  sed -i -e 's/ rhgb quiet//' /etc/default/grub
-
-  # enable resizing on copied AMIs
-  echo 'install_items+=" sgdisk "' > /etc/dracut.conf.d/sgdisk.conf
-
-  # OCI - Need iscsi as a dracut module
-  echo 'add_dracutmodules+=" iscsi "' > /etc/dracut.conf.d/iscsi.conf
-
-  # OCI - Virtio drivers
-  echo 'add_drivers+=" virtio virtio_blk virtio_net virtio_pci virtio_ring virtio_scsi virtio_console "' > /etc/dracut.conf.d/virtio.conf
-
-  # OCI - YOLO
-  mkdir -p /usr/lib/dracut/modules.d/95oci
-  OCIDRACUT="H4sIAGtFHmMAA+2WWW/bOBCA/Vr+illZzQXoluPUhgMURYrmpS02fevuGpJIWYQVUiWpJoHr/15S
-crLZZBs3QA8U5QfYosQ5NUNSrRRBTfMAi6xoVXDOcVsT6ePg2YgXNBh8C0LNeDTqrpq7124cpfF4
-nIzT8fhwEEaj+HA8gNE38b6FVqpMAAwE5+ohuW3zvyjtw/UnLMtr4lFZSOrlV00mpS+rR/rYUv84
-StJBlIx10ZNREscD/SRNkwGE3yXjO/zm9R/+EeSUBbJCQ/AOPNANQCYgK1LXniwEbdQUKMOEKU9l
-ufT6eUbrqRby8kzSwuNlKYmaQDo1JrQhcjkBJWdHIC9mKUg9TIEoKGlN1FVDZtobGr7NVFFB11nm
-3YLikNU1v4A8ozXwVgEtQVUEullM5RKKjGkZQTJ8BTmBkrcMo6Eg5QTeiCxvFxMYJmESxWGYImRc
-wYLo8i7gOMDkY8Dauob4eCeCT5/Ah1uN7+mhbmx0+vrs5M93s10kZo67Mp6Hec2L5WTtIB1Oby3n
-vIYQBPa76P1+XcDODrwHj4DjCgf+nprYGSDQlFwA69KgDNy93ooERpR5uD8FzDs5w3utv+qEnz6d
-HKwdmIHTudE2TdgFZ4qyltwodGk2mZBk3snNO0dfTlh7vc722sQ9bcftInCMmiCqFQyiG+lN2HPC
-ipm7J5WYC9LUWUH+VXMC/fsrLp39TgtzRuAe3RQpKr5JcAJnS9o0lC3AveXD930HjnfiR4lDl/7y
-XC5uqUkjT7CZdgJ13gSdHbP+FcHebSNOr3VJFYSopGgXfWX1S21ZmgV109c3rYCuwzgxe6oJ+/Ts
-xdkpbPR5oyhn15l+leR/kuw13L6BdeFAEgwehd3gn7fP372a+QdusBK9ilSYmniq9RTc1eU0MBKB
-HnwI11P9n6x3/ycP3QsXme4E56VeoNr4g9GZt/az9zbLdrac//29p7f3tnn8wb9h2/dfchjdOf/D
-OIns+f8j2Jz/+iD/4V8ARUWK5d4+rNCTzRkTojVCmDSEYXl/gjJdqrruJ8zNvOJ8CY0gXqt3NTg6
-0vufjg5T8YXvVkeb+dkv3GKxWCwWi8VisVgsFovFYrFYLBaLxWL5jnwGdMMrBgAoAAA="
-
-  base64 -d <<<"$OCIDRACUT" | tar -xz
-
-  OCICLOUDCFG="IyBPQ0kgY2xvdWQtaW5pdCBjb25maWd1cmF0aW9uCmRhdGFzb3VyY2VfbGlzdDogWydPcmFjbGUn
-LCAnT3BlblN0YWNrJ10KZGF0YXNvdXJjZToKICBPcGVuU3RhY2s6CiAgICBtZXRhZGF0YV91cmxz
-OiBbJ2h0dHA6Ly8xNjkuMjU0LjE2OS4yNTQnXQogICAgdGltZW91dDogMTAKICAgIG1heF93YWl0
-OiAyMAoKIyBzd2FwIGZpbGUKc3dhcDoKICAgZmlsZW5hbWU6IC8uc3dhcGZpbGUKICAgc2l6ZTog
-ImF1dG8iCgpjbG91ZF9pbml0X21vZHVsZXM6CiMgT0NJOiBkaXNrX3NldHVwIGlzIGRpc2FibGVk
-CiMtIGRpc2tfc2V0dXAKIC0gbWlncmF0b3IKIC0gYm9vdGNtZAogLSB3cml0ZS1maWxlcwojIE9D
-STogVGhlIGdyb3dwYXJ0IG1vZHVsZSBpcyBkaXNhYmxlZCBieSBkZWZhdWx0LiBUbyBlbmFibGUg
-YXV0b21hdGljIGJvb3Qgdm9sdW1lIHJlc2l6aW5nLCB1bmNvbW1lbnQKIyB0aGUgYmVsb3cgZW50
-cnkgZm9yICctIGdyb3dwYXJ0JyBhbmQgcmVib290LiBBbGwgdGhlIGRlcGVuZGVudCBwYWNrYWdl
-cyBmb3IgdGhlIGdyb3dwYXJ0CiMgbW9kdWxlIHRvIHdvcmsgc3VjaCBhcyBjbG91ZC11dGlscy1n
-cm93cGFydCBhbmQgZ2Rpc2sgYXJlIGFscmVhZHkgaW5jbHVkZWQgaW4gdGhlIGltYWdlLgojLSBn
-cm93cGFydAogLSByZXNpemVmcwojIE9DSTogc2V0X2hvc3RuYW1lLCB1cGRhdGVfaG9zdG5hbWUs
-IHVwZGF0ZV9ldGNfaG9zdHMgYXJlIGRpc2FibGVkCiMtIHNldF9ob3N0bmFtZQojLSB1cGRhdGVf
-aG9zdG5hbWUKIy0gdXBkYXRlX2V0Y19ob3N0cwogLSByc3lzbG9nCiAtIHVzZXJzLWdyb3Vwcwog
-LSBzc2gKCmNsb3VkX2NvbmZpZ19tb2R1bGVzOgogLSBtb3VudHMKIC0gbG9jYWxlCiAtIHNldC1w
-YXNzd29yZHMKIyBPQ0k6IHJoX3N1YnNjcmlwdGlvbiBpcyBkaXNhYmxlZAojLSByaF9zdWJzY3Jp
-cHRpb24KIC0geXVtLWFkZC1yZXBvCiAtIHBhY2thZ2UtdXBkYXRlLXVwZ3JhZGUtaW5zdGFsbAog
-LSB0aW1lem9uZQogLSBudHAKIC0gcHVwcGV0CiAtIGNoZWYKIC0gc2FsdC1taW5pb24KIC0gbWNv
-bGxlY3RpdmUKIC0gZGlzYWJsZS1lYzItbWV0YWRhdGEKIC0gcnVuY21kCgpjbG91ZF9maW5hbF9t
-b2R1bGVzOgogLSByaWdodHNjYWxlX3VzZXJkYXRhCiAtIHNjcmlwdHMtcGVyLW9uY2UKIC0gc2Ny
-aXB0cy1wZXItYm9vdAogLSBzY3JpcHRzLXBlci1pbnN0YW5jZQogLSBzY3JpcHRzLXVzZXIKIC0g
-c3NoLWF1dGhrZXktZmluZ2VycHJpbnRzCiAtIGtleXMtdG8tY29uc29sZQogLSBwaG9uZS1ob21l
-CiAtIGZpbmFsLW1lc3NhZ2UKIyBPQ0k6IHBvd2VyLXN0YXRlLWNoYW5nZSBpcyBkaXNhYmxlZAoj
-LSBwb3dlci1zdGF0ZS1jaGFuZ2UKCg=="
-
-  base64 -d <<<"$OCICLOUDCFG" >> /etc/cloud/cloud.cfg.d/99_oci.cfg
-
-  # Remove system.devices because Oracle does things.
-  rm -fv /etc/lvm/devices/system.devices
-
-}
-
-function cloud_cleanup_steps() {
-  truncate -c -s 0 /var/log/dnf.log
-  rm -rf /var/log/yum.log
-  rm -rf /var/lib/yum/*
-  rm -rf /root/install.log
-  rm -rf /root/install.log.syslog
-  rm -rf /root/anaconda-ks.cfg
-  rm -rf /var/log/anaconda*
-
-  rm -f /var/lib/systemd/random-seed
-
-  touch /var/log/cron
-  touch /var/log/boot.log
-  mkdir -p /var/cache/yum
-
-  # Azure Only
-  if [[ "$kiwi_profiles" == *"Azure"* ]]; then
-    rm -f /var/log/waagent.log
-    cloud-init clean
-    waagent -force -deprovision+user
-  fi
-
-  # Attempt to fix file permissions
-  for x in $(rpm -qa); do rpm --setperms "${x}" ; done
-
-  # Attempt to fix labeling
-  /usr/sbin/fixfiles -R -a restore
-}
-
-function azure_cleanup_steps() {
-  rm -f /var/log/waagent.log
-  cloud-init clean
-  waagent -force -deprovision+user
-}
-
-function common_container_steps() {
-  /bin/date +%Y-%m-%d_%H:%M:%S > /etc/BUILDTIME
-  echo 'container' > /etc/dnf/vars/infra
-  LANG="en_US"
-  echo "%_install_langs $LANG" > /etc/rpm/macros.image-language-conf
-  echo 'LANG="C.UTF-8"' >  /etc/locale.conf
-  releasever=$(rpm --eval '%{?rocky}')
-  rpm --import "/etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-${releasever}"
-  :> /etc/machine-id
-  echo "# placeholder" > /etc/resolv.conf
-  chmod 644 /etc/resolv.conf
-  rm -rf /tmp/*
-  printf "tsflags=nodocs\n" >>/etc/dnf/dnf.conf
-}
-
-function minimal_container_steps() {
-  microdnf -y remove langpacks-en || true
-  rm -fv /usr/share/gnupg/help*.txt
-  rm /usr/lib/rpm/rpm.daily
-  rm -rfv /usr/lib64/nss/unsupported-tools/
-  rm -fv /usr/sbin/{glibc_post_upgrade.x86_64,sln}
-  ln /usr/bin/ln usr/sbin/sln
-  rm -rfv /var/lib/dnf
-  rm -rfv /usr/share/icons/*
-  rm -fv /usr/bin/pinky
-  rm -rfv /usr/lib/systemd
-}
-
-function toolbox_container_steps() {
-  rm -f /etc/rpm/macros.image-language-conf
-  sed -i '/tsflags=nodocs/d' /etc/dnf/dnf.conf
-}
-
-################################################################################
-# Vagrant
-function common_vagrant_steps() {
-  fallocate -l 2G /swapfile
-  chmod 600 /swapfile
-  mkswap /swapfile
-  echo "/swapfile none swap defaults 0 0" >> /etc/fstab
-
-  cat > /etc/sudoers.d/vagrant << EOF
-Defaults:vagrant !requiretty
-%vagrant ALL=(ALL) NOPASSWD: ALL
-EOF
-  chmod 0440 /etc/sudoers.d/vagrant
-  # This may have to be changed for 10
-  sed -i 's/^\(PasswordAuthentication\) yes$/\1 no/' /etc/ssh/sshd_config
-  sed -i 's/^#\(UseDNS\) yes$/\r\1 no/' /etc/ssh/sshd_config
-
-  cat >>/etc/sysconfig/sshd <<EOF
-# Decrease connection time by preventing reverse DNS lookups
-# (see https://lists.centos.org/pipermail/centos-devel/2016-July/014981.html)
-OPTIONS="-u0"
-EOF
-
-  # Setup insecure key by default
-  mkdir -m 0700 -p /home/vagrant/.ssh
-  echo "ssh-rsa AAAAB3NzaC1yc2EAAAABIwAAAQEA6NF8iallvQVp22WDkTkyrtvp9eWW6A8YVr+kz4TjGYe7gHzIw+niNltGEFHzD8+v1I2YJ6oXevct1YeS0o9HZyN1Q9qgCgzUFtdOKLv6IedplqoPkcmF0aYet2PkEDo3MlTBckFXPITAMzF8dJSIFo9D8HfdOV0IAdx4O7PtixWKn5y2hMNG0zQPyUecp4pzC6kivAIhyfHilFR61RGL+GPXQ2MWZWFYbAGjyiYJnAmCP3NOTd0jMZEnDkbUvxhMmBYSdETk1rRgm+R4LOzFUGaHqHDLKLX+FIPKcF96hrucXzcWyLbIbEgE98OHlnVYCzRdK8jlqm8tehUc9c9WhQ== vagrant insecure public key" >> /home/vagrant/.ssh/authorized_keys
-  chmod 600 /home/vagrant/.ssh/authorized_keys
-  chown -R vagrant:vagrant /home/vagrant/.ssh
-
-  echo 'vag' > /etc/yum/vars/infra
-  echo blacklist floppy > /etc/modprobe.d/nofloppy.conf
-  pushd /etc/dracut.conf.d
-  # Enable VMware PVSCSI support for VMware Fusion guests.
-  echo 'add_drivers+=" vmw_pvscsi "' > vmware-fusion-drivers.conf
-  echo 'add_drivers+=" hv_netvsc hv_storvsc hv_utils hv_vmbus hid-hyperv "' > hyperv-drivers.conf
-  # There's no floppy controller, but probing for it generates timeouts
-  echo 'omit_drivers+=" floppy "' > nofloppy.conf
-  popd
-  #echo "Regenerating kernel"
-  #KERNEL_VERSION=$(rpm -q kernel --qf '%{version}-%{release}.%{arch}\n')
-  #dracut -f -v
-  rm -rf /etc/ssh/ssh_host_*
-
-  # Might not be needed for 10
-  ex -s /etc/pam.d/su <<'EOF'
-/^account\s\+sufficient\s\+pam_succeed_if.so uid = 0 use_uid quiet$/
-:append
-account   [success=1 default=ignore] \\
-        pam_succeed_if.so user = vagrant use_uid quiet
-account   required  pam_succeed_if.so user notin root:vagrant
-.
-:update
-:quit
-EOF
-}
-
-function vbox_vagrant_steps() {
-  # legacy stuff, we won't have this for 10
-  cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
-DEVICE="eth0"
-BOOTPROTO="dhcp"
-ONBOOT="yes"
-TYPE="Ethernet"
-PERSISTENT_DHCLIENT="yes"
-EOF
-
-  # Install VBoxGuestAdditions for installed kernel.
-  # https://git.resf.org/sig_kernel/meta/issues/13
-  #kver=$(rpm -q --queryformat="%{VERSION}-%{RELEASE}.%{ARCH}" kernel)
-  #echo "stg/rocky" > /etc/dnf/vars/contentdir
-  #sed -i 's/^#baseurl/baseurl/g;s/^mirrorlist/#mirrorlist/g' /etc/yum.repos.d/rocky*repo
-  #dnf -y install kernel-headers-$kver kernel-devel gcc make perl elfutils-libelf-devel
-  #sed -i 's/^baseurl/#baseurl/g;s/^#mirrorlist/mirrorlist/g' /etc/yum.repos.d/rocky*repo
-  #echo "pub/rocky" > /etc/dnf/vars/contentdir
-  #curl -L -o /tmp/vboxadditions.iso https://download.virtualbox.org/virtualbox/7.0.16/VBoxGuestAdditions_7.0.16.iso
-  #mkdir -p /media/VBoxGuestAdditions
-  #mount -o loop,ro /tmp/vboxadditions.iso /media/VBoxGuestAdditions
-  #mkdir -p /tmp/VBoxGuestAdditions
-  #sh /media/VBoxGuestAdditions/VBoxLinuxAdditions.run --nox11 --noexec --keep --target /tmp/VBoxGuestAdditions
-  #pushd /tmp/VBoxGuestAdditions
-  #./install.sh
-  #/sbin/rcvboxadd quicksetup all
-  #popd
-  #ls "/lib/modules/${kver}/misc/"
-  #modinfo "/lib/modules/${kver}/misc/vboxsf.ko"
-  #rm -rf /tmp/VBoxGuestAdditions
-  #umount /media/VBoxGuestAdditions
-  #rm -f /tmp/vboxadditions.iso
-  #rmdir /media/VBoxGuestAdditions
-  #dnf -y remove kernel-devel gcc make perl elfutils-libelf-devel
-}
-
-function libvirt_vagrant_steps() {
-  # legacy stuff, we won't have this for 10
-  cat > /etc/sysconfig/network-scripts/ifcfg-eth0 << EOF
-DEVICE="eth0"
-BOOTPROTO="dhcp"
-ONBOOT="yes"
-TYPE="Ethernet"
-PERSISTENT_DHCLIENT="yes"
-EOF
-}
-
-################################################################################
-# SBC
-function common_sbc_steps() {
-  :> /etc/machine-id
-  rm -f /etc/sysconfig/network-scripts/ifcfg-link
-  rm -f /etc/ssh/*_key*
-  dnf clean all
-  chown -R sssd:sssd /var/lib/sss/{db,pipes,mc,pubconf,gpo_cache}
-  cat > /etc/sysconfig/cpupower << EOF
-CPUPOWER_START_OPTS="frequency-set -g ondemand"
-CPUPOWER_STOP_OPTS="frequency-set -g ondemand"
-EOF
-}
-
-function raspberrypi_sbc_steps() {
-  cd /lib/firmware/brcm
-  xz -d -k brcmfmac43430-sdio.raspberrypi,3-model-b.txt.xz
-  cat > /boot/cmdline.txt << EOF
-console=ttyAMA0,115200 console=tty1 root=LABEL=RPIROOT rootfstype=ext4 elevator=deadline rootwait
-EOF
-}
-
-function genericarm_sbc_steps() {
-  mkdir -p /boot/efi/EFI/BOOT
-  if [ -d /boot/efi/EFI/rocky/ ] && [ -f /boot/efi/EFI/rocky/grubaa64.efi ];then
-    for j in grub.cfg grubenv;do
-      if [ -f "/boot/grub2/${j}" ]; then
-        mv -f /boot/grub2/${j} /boot/efi/EFI/rocky/
-        ln -s ../efi/EFI/rocky/${j} /boot/grub2/${j}
-      fi
-    done
-    cp -f /boot/efi/EFI/rocky/grubaa64.efi /boot/efi/EFI/BOOT/BOOTAA64.EFI
-  fi
-
-  if [ -f /usr/share/uboot/rpi_3/u-boot.bin ]; then
-    cp -f /usr/share/uboot/rpi_3/u-boot.bin /boot/efi/rpi3-u-boot.bin
-  fi
-  if [ -f /usr/share/uboot/rpi_4/u-boot.bin ]; then
-    cp -f /usr/share/uboot/rpi_4/u-boot.bin /boot/efi/rpi4-u-boot.bin
-  fi
-  if [ -f /usr/share/uboot/rpi_arm64/u-boot.bin ]; then
-    cp -f /usr/share/uboot/rpi_arm64/u-boot.bin /boot/efi/rpi-u-boot.bin
-  fi
-
-  rpm -e dracut-config-generic
-  if [ -x /lib/kernel/install.d/10-devicetree.install ]; then
-    /lib/kernel/install.d/10-devicetree.install remove
-  fi
-
-  cat << EOF > /etc/sysconfig/kernel
-# Written by image installer
-# UPDATEDEFAULT specifies if new-kernel-pkg should make new kernels the default
-UPDATEDEFAULT=yes
-
-# DEFAULTKERNEL specifies the default kernel package type
-DEFAULTKERNEL=kernel-core
-EOF
-chmod 644 /etc/sysconfig/kernel
-
-### Write grub defaults, turn off OS probing as it is always wrong for image creation
-cat << EOF > /etc/default/grub
-GRUB_TIMEOUT=5
-GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)"
-GRUB_DEFAULT=saved
-GRUB_DISABLE_SUBMENU=true
-GRUB_TERMINAL_OUTPUT="console"
-GRUB_CMDLINE_LINUX=""
-GRUB_DISABLE_RECOVERY="true"
-GRUB_DISABLE_OS_PROBER="true"
-GRUB_ENABLE_BLSCFG="false"
-EOF
-  chmod 644 /etc/default/grub
-  rm -f /boot/dtb
-
-  ###set hostname so it can be found on the network
-  echo "rockyaltarch" > /etc/hostname
-
-  cat >/usr/local/bin/rootfs-expand << EOF
-#!/bin/bash
-clear
-part=\$(mount |grep '^/dev.* / ' |awk '{print \$1}')
-if [ -z "\$part" ];then
-    echo "Error detecting rootfs"
-    exit -1
-fi
-dev=\$(echo \$part|sed 's/[0-9]*\$//g')
-devlen=\${#dev}
-num=\${part:\$devlen}
-if [[ "\$dev" =~ ^/dev/(mmcblk|nvm3[0-9]+n)[0-9]*p\$ ]];then
-    dev=\${dev:0:-1}
-fi
-if [ ! -x /usr/bin/growpart ];then
-    echo "Please install cloud-utils-growpart (sudo yum install cloud-utils-growpart)"
-    exit -2
-fi
-if [ ! -x /usr/sbin/resize2fs ];then
-    echo "Please install e2fsprogs (sudo yum install e2fsprogs)"
-    exit -3
-fi
-echo \$part \$dev \$num
-
-echo "Extending partition \$num to max size ...."
-growpart \$dev \$num
-echo "Resizing ext4 filesystem ..."
-resize2fs \$part
-echo "Done."
-df -h |grep \$part
-EOF
-  chmod +x /usr/local/bin/rootfs-expand
-}
-
-#
-################################################################################
-
-cat /dev/null > /etc/machine-id
-
-# Gets around grub-bls issue
-echo "GRUB_DEFAULT=saved" >> /etc/default/grub
-
-# All cloud and live
-if [[ "$kiwi_profiles" == *"Cloud"* ]] || [[ "$kiwi_profiles" == *"Live"* ]]; then
-  passwd -d root
-  passwd -l root
-fi
-
-################################################################################
-# Just about all the cloud images should do these things.
-if [[ "$kiwi_profiles" == *"Cloud"* ]]; then
-  common_cloud_steps
-fi
-
-################################################################################
-# Azure specific settings
-if [[ "$kiwi_profiles" == *"Azure"* ]]; then
-  azure_cloud_steps
-fi
-
-################################################################################
-# EC2 specific settings
-if [[ "$kiwi_profiles" == *"EC2"* ]]; then
-  ec2_cloud_steps
-fi
-
-################################################################################
-# GenClo specific settings
-if [[ "$kiwi_profiles" == *"GenericCloud"* ]]; then
-  genclo_cloud_steps
-fi
-
-################################################################################
-# OCP specific settings
-if [[ "$kiwi_profiles" == *"OCP"* ]]; then
-  ocp_cloud_steps
-fi
-
-# cloud clean up
-if [[ "$kiwi_profiles" == *"Cloud"* ]]; then
-  echo "cleanup time"
-  cloud_cleanup_steps
-
-  # Azure Only
-  if [[ "$kiwi_profiles" == *"Azure"* ]]; then
-    azure_cleanup_steps
-  fi
-
-  rm -f ~/.bash_history
-  export HISTSIZE=0
-fi
-
-# Live Images Only
-if [[ "$kiwi_profiles" == *"Live"* ]]; then
-  common_live_steps
-  if [[ "$kiwi_profiles" == *"Workstation"* ]]; then
-    live_gnome_steps
-  fi
-  if [[ "$kiwi_profiles" == *"KDE"* ]]; then
-    live_kde_steps
-    epel_de_steps
-  fi
-  if [[ "$kiwi_profiles" == *"Cinnamon"* ]]; then
-    live_cinnamon_steps
-    epel_de_steps
-  fi
-  if [[ "$kiwi_profiles" == *"MATE"* ]]; then
-    live_mate_steps
-    epel_de_steps
-  fi
-  if [[ "$kiwi_profiles" == *"XFCE"* ]]; then
-    live_xfce_steps
-    epel_de_steps
-  fi
-fi
-
-# Containers only
-if [[ "$kiwi_profiles" == *"Container"* ]]; then
-  common_container_steps
-  if [[ "$kiwi_profiles" == *"Container-Minimal"* ]]; then
-    minimal_container_steps
-  fi
-  if [[ "$kiwi_profiles" == *"Container-Toolbox"* ]]; then
-    toolbox_container_steps
-  fi
-fi
-
-# Vagrant only
-if [[ "$kiwi_profiles" == *"Vagrant"* ]]; then
-  common_vagrant_steps
-  if [[ "$kiwi_profiles" == *"Vagrant-Libvirt"* ]]; then
-    libvirt_vagrant_steps
-  fi
-  if [[ "$kiwi_profiles" == *"Vagrant-Vbox"* ]]; then
-    vbox_vagrant_steps
-  fi
-fi
-
-# SBC Only
-if [[ "$kiwi_profiles" == *"SBC"* ]]; then
-  common_sbc_steps
-  if [[ "$kiwi_profiles" == *"SBC-RaspberryPi"* ]]; then
-    raspberrypi_sbc_steps
-  fi
-  if [[ "$kiwi_profiles" == *"SBC-GenericArm"* ]]; then
-    genericarm_sbc_steps
-  fi
-fi
--- a/config.xml
+++ b/config.xml
@ -1 +0,0 @@
-configs/rocky-sbc-genericarm-gpt.xml
--- a/configs/rocky-live-cinnamon.xml
+++ b/configs/rocky-live-cinnamon.xml
@ -1,28 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-
-<image schemaversion="7.4" name="Rocky-9-Cinnamon" displayname="Rocky Linux Cinnamon 9">
-  <description type="system">
-    <author>Release Engineering (SIG/Core)</author>
-    <contact>releng@rockylinux.org</contact>
-    <specification>Rocky Linux</specification>
-  </description>
-  <preferences>
-    <version>9</version>
-    <packagemanager>dnf</packagemanager>
-    <locale>en_US</locale>
-    <keytable>us</keytable>
-    <timezone>UTC</timezone>
-    <release-version>9</release-version>
-  </preferences>
-  <include from="this://./repositories/core.xml"/>
-  <include from="this://./repositories/epel.xml"/>
-  <include from="this://./components/boot.xml"/>
-  <include from="this://./components/users.xml"/>
-  <include from="this://./components/live/common.xml"/>
-  <include from="this://./components/live/cinnamon.xml"/>
-  <include from="this://./live/cinnamon.xml"/>
-  <packages type="bootstrap">
-    <package name="basesystem"/>
-    <package name="filesystem"/>
-  </packages>
-</image>
--- a/configs/rocky-live-kde.ks
+++ b/configs/rocky-live-kde.ks
@ -1,28 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-
-<image schemaversion="7.4" name="Rocky-ZZVERZZ-KDE" displayname="Rocky Linux KDE ZZVERZZ">
-  <description type="system">
-    <author>Release Engineering (SIG/Core)</author>
-    <contact>releng@rockylinux.org</contact>
-    <specification>Rocky Linux</specification>
-  </description>
-  <preferences>
-    <version>9</version>
-    <packagemanager>dnf</packagemanager>
-    <locale>en_US</locale>
-    <keytable>us</keytable>
-    <timezone>UTC</timezone>
-    <release-version>9</release-version>
-  </preferences>
-  <include from="this://./repositories/core.xml"/>
-  <include from="this://./repositories/epel.xml"/>
-  <include from="this://./components/boot.xml"/>
-  <include from="this://./components/users.xml"/>
-  <include from="this://./components/live/common.xml"/>
-  <include from="this://./components/live/kde.xml"/>
-  <include from="this://./live/kde.xml"/>
-  <packages type="bootstrap">
-    <package name="basesystem"/>
-    <package name="filesystem"/>
-  </packages>
-</image>
--- a/configs/rocky-live-mate.xml
+++ b/configs/rocky-live-mate.xml
@ -1,28 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-
-<image schemaversion="7.4" name="Rocky-9-MATE" displayname="Rocky Linux MATE 9">
-  <description type="system">
-    <author>Release Engineering (SIG/Core)</author>
-    <contact>releng@rockylinux.org</contact>
-    <specification>Rocky Linux</specification>
-  </description>
-  <preferences>
-    <version>9</version>
-    <packagemanager>dnf</packagemanager>
-    <locale>en_US</locale>
-    <keytable>us</keytable>
-    <timezone>UTC</timezone>
-    <release-version>9</release-version>
-  </preferences>
-  <include from="this://./repositories/core.xml"/>
-  <include from="this://./repositories/epel.xml"/>
-  <include from="this://./components/boot.xml"/>
-  <include from="this://./components/users.xml"/>
-  <include from="this://./components/live/common.xml"/>
-  <include from="this://./components/live/mate.xml"/>
-  <include from="this://./live/mate.xml"/>
-  <packages type="bootstrap">
-    <package name="basesystem"/>
-    <package name="filesystem"/>
-  </packages>
-</image>
--- a/configs/rocky-live-workstation-lite.xml
+++ b/configs/rocky-live-workstation-lite.xml
@ -1,27 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-
-<image schemaversion="7.4" name="Rocky-9-Workstation-Lite" displayname="Rocky Linux Workstation-Lite 9">
-  <description type="system">
-    <author>Release Engineering (SIG/Core)</author>
-    <contact>releng@rockylinux.org</contact>
-    <specification>Rocky Linux</specification>
-  </description>
-  <preferences>
-    <version>9</version>
-    <packagemanager>dnf</packagemanager>
-    <locale>en_US</locale>
-    <keytable>us</keytable>
-    <timezone>UTC</timezone>
-    <release-version>9</release-version>
-  </preferences>
-  <include from="this://./repositories/core.xml"/>
-  <include from="this://./components/boot.xml"/>
-  <include from="this://./components/users.xml"/>
-  <include from="this://./components/live/common.xml"/>
-  <include from="this://./components/live/workstation-lite.xml"/>
-  <include from="this://./live/workstation-lite.xml"/>
-  <packages type="bootstrap">
-    <package name="basesystem"/>
-    <package name="filesystem"/>
-  </packages>
-</image>
--- a/configs/rocky-live-workstation.xml
+++ b/configs/rocky-live-workstation.xml
@ -1,27 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-
-<image schemaversion="7.4" name="Rocky-9-Workstation" displayname="Rocky Linux Workstation 9">
-  <description type="system">
-    <author>Release Engineering (SIG/Core)</author>
-    <contact>releng@rockylinux.org</contact>
-    <specification>Rocky Linux</specification>
-  </description>
-  <preferences>
-    <version>9</version>
-    <packagemanager>dnf</packagemanager>
-    <locale>en_US</locale>
-    <keytable>us</keytable>
-    <timezone>UTC</timezone>
-    <release-version>9</release-version>
-  </preferences>
-  <include from="this://./repositories/core.xml"/>
-  <include from="this://./components/boot.xml"/>
-  <include from="this://./components/users.xml"/>
-  <include from="this://./components/live/common.xml"/>
-  <include from="this://./components/live/workstation.xml"/>
-  <include from="this://./live/workstation.xml"/>
-  <packages type="bootstrap">
-    <package name="basesystem"/>
-    <package name="filesystem"/>
-  </packages>
-</image>
--- a/configs/rocky-live-xfce.xml
+++ b/configs/rocky-live-xfce.xml
@ -1,28 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-
-<image schemaversion="7.4" name="Rocky-9-XFCE" displayname="Rocky Linux XFCE 9">
-  <description type="system">
-    <author>Release Engineering (SIG/Core)</author>
-    <contact>releng@rockylinux.org</contact>
-    <specification>Rocky Linux</specification>
-  </description>
-  <preferences>
-    <version>9</version>
-    <packagemanager>dnf</packagemanager>
-    <locale>en_US</locale>
-    <keytable>us</keytable>
-    <timezone>UTC</timezone>
-    <release-version>9</release-version>
-  </preferences>
-  <include from="this://./repositories/core.xml"/>
-  <include from="this://./repositories/epel.xml"/>
-  <include from="this://./components/boot.xml"/>
-  <include from="this://./components/users.xml"/>
-  <include from="this://./components/live/common.xml"/>
-  <include from="this://./components/live/xfce.xml"/>
-  <include from="this://./live/xfce.xml"/>
-  <packages type="bootstrap">
-    <package name="basesystem"/>
-    <package name="filesystem"/>
-  </packages>
-</image>
--- a/configs/rocky-sbc-genericarm-gpt.xml
+++ b/configs/rocky-sbc-genericarm-gpt.xml
@ -1,27 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-
-<image schemaversion="7.5" name="Rocky-generic-gpt">
-  <description type="system">
-    <author>Release Engineering (SIG/Core)</author>
-    <contact>releng@rockylinux.org</contact>
-    <specification>Rocky Linux</specification>
-  </description>
-  <preferences>
-    <version>9</version>
-    <packagemanager>dnf</packagemanager>
-    <locale>en_US</locale>
-    <keytable>us</keytable>
-    <timezone>UTC</timezone>
-    <release-version>9</release-version>
-  </preferences>
-  <include from="this://./repositories/core.xml"/>
-  <include from="this://./repositories/altarch-common.xml"/>
-  <include from="this://./repositories/gnulab-tmp.xml"/>
-  <include from="this://./components/boot.xml"/>
-  <include from="this://./components/users.xml"/>
-  <include from="this://./sbc/sbc-gpt.xml"/>
-  <packages type="bootstrap">
-    <package name="basesystem"/>
-    <package name="filesystem"/>
-  </packages>
-</image>
--- a/configs/rocky-sbc-genericarm-mbr.xml
+++ b/configs/rocky-sbc-genericarm-mbr.xml
@ -1,27 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-
-<image schemaversion="7.4" name="Rocky-generic-mbr">
-  <description type="system">
-    <author>Release Engineering (SIG/Core)</author>
-    <contact>releng@rockylinux.org</contact>
-    <specification>Rocky Linux</specification>
-  </description>
-  <preferences>
-    <version>9</version>
-    <packagemanager>dnf</packagemanager>
-    <locale>en_US</locale>
-    <keytable>us</keytable>
-    <timezone>UTC</timezone>
-    <release-version>9</release-version>
-  </preferences>
-  <include from="this://./repositories/core.xml"/>
-  <include from="this://./repositories/altarch-common.xml"/>
-  <include from="this://./repositories/gnulab-tmp.xml"/>
-  <include from="this://./components/boot.xml"/>
-  <include from="this://./components/users.xml"/>
-  <include from="this://./sbc/sbc-mbr.xml"/>
-  <packages type="bootstrap">
-    <package name="basesystem"/>
-    <package name="filesystem"/>
-  </packages>
-</image>
--- a/configs/rocky-sbc-raspberrypi.xml
+++ b/configs/rocky-sbc-raspberrypi.xml
@ -1,26 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-
-<image schemaversion="7.4" name="Rocky-rpi">
-  <description type="system">
-    <author>Release Engineering (SIG/Core)</author>
-    <contact>releng@rockylinux.org</contact>
-    <specification>Rocky Linux</specification>
-  </description>
-  <preferences>
-    <version>9</version>
-    <packagemanager>dnf</packagemanager>
-    <locale>en_US</locale>
-    <keytable>us</keytable>
-    <timezone>UTC</timezone>
-    <release-version>9</release-version>
-  </preferences>
-  <include from="this://./repositories/core.xml"/>
-  <include from="this://./repositories/altarch-common.xml"/>
-  <include from="this://./components/boot.xml"/>
-  <include from="this://./components/users.xml"/>
-  <include from="this://./sbc/pi.xml"/>
-  <packages type="bootstrap">
-    <package name="basesystem"/>
-    <package name="filesystem"/>
-  </packages>
-</image>
--- a/configs/rocky.xml
+++ b/configs/rocky.xml
@ -1,48 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-
-<image schemaversion="7.4" name="Rocky">
-  <description type="system">
-    <author>Release Engineering (SIG/Core)</author>
-    <contact>releng@rockylinux.org</contact>
-    <specification>Rocky Linux</specification>
-  </description>
-  <preferences>
-    <version>9</version>
-    <packagemanager>dnf</packagemanager>
-    <locale>en_US</locale>
-    <keytable>us</keytable>
-    <timezone>UTC</timezone>
-    <release-version>9</release-version>
-  </preferences>
-  <include from="this://./repositories/core.xml"/>
-  <include from="this://./repositories/sig-core.xml"/>
-  <!-- research if these should be on for everything in general
-    would leaving these on affect what's pulled? original kickstarts used
-    would stick with our repos until the OCP images.
-  <include from="this://./repositories/oracle.xml"/>
-  <include from="this://./repositories/cloud-common.xml"/>
-  <include from="this://./repositories/kernel-common.xml"/>
-  -->
-  <!-- Components -->
-  <include from="this://./components/boot.xml"/>
-  <include from="this://./components/users.xml"/>
-  <include from="this://./components/live/common.xml"/>
-  <include from="this://./components/live/xfce.xml"/>
-  <!-- Cloud -->
-  <include from="this://./cloud/cloud.xml"/>
-  <!-- Vagrant -->
-  <include from="this://./vagrant/vagrant.xml"/>
-  <!-- Containers -->
-  <include from="this://./container/container.xml"/>
-  <!-- Live -->
-  <include from="this://./live/workstation.xml"/>
-  <include from="this://./live/workstation-lite.xml"/>
-  <include from="this://./live/xfce.xml"/>
-  <include from="this://./live/mate.xml"/>
-  <include from="this://./live/kde.xml"/>
-  <include from="this://./live/cinnamon.xml"/>
-  <packages type="bootstrap">
-    <package name="basesystem"/>
-    <package name="filesystem"/>
-  </packages>
-</image>
--- a/container-build.sh
+++ b/container-build.sh
@ -1,99 +0,0 @@
-#!/bin/bash
-# helps build a quick container image. that way a user doesn't have to use emapandas
-# nor some other method. mock is probably not necessary, but it's up to you.
-# label@resf.org
-
-set -o errexit
-set -o pipefail
-
-SCRNAME="$(basename "$0")"
-SCRDIR="$(dirname "${BASH_SOURCE[0]}")"
-
-export __usage
-__usage="
-usage: $SCRNAME [OPTIONS]
-
-Options:
-  -o, --output-dir  DIR
-  -c, --container   NAME
-  -p, --peridot     ID   # optional. will use peridot repos.
-  -d, --debug            # optional
-
-"
-
-OPTS=$(getopt -a -n container-build -o c:,o:,p:,d,h \
-  -l container:,output-dir:,peridot:,debug,help -- "$@")
-
-function is_in_path() {
-  builtin type -P "${1}"
-}
-
-function usage() {
-  echo "$__usage"
-}
-
-eval set -- "$OPTS"
-while :; do
-  case "$1" in
-    -c | --container)   CONTAINER="$2"  ; shift 2 ;;
-    -o | --output-dir)  OUTPUTDIR="$2"  ; shift 2 ;;
-    -p | --peridot)     PERIDOTID="$2"  ; shift 2 ;;
-    -d | --debug)       DEBUG="--debug" ; shift   ;;
-    -h | --help)        usage                     ;;
-    --) shift ; break ;;
-  esac
-done
-
-if [ -z "$CONTAINER" ] || [ -z "$OUTPUTDIR" ]; then
-  echo "Options are not set properly."
-  usage
-  exit 12
-fi
-
-if [ -e "/sys/fs/selinux/enforce" ]; then
-  enforce_check="$(cat /sys/fs/selinux/enforce)"
-  if [ "$enforce_check" -eq "1" ]; then
-    echo "Running with selinux enforcing is not recommended."
-    exit 22
-  fi
-fi
-
-is_in_path kiwi-ng &> /dev/null
-ret_val=$?
-
-if [ "$ret_val" -ne "0" ]; then
-  echo "kiwi-ng not found. kiwi packages are likely not installed on this system."
-  exit 32
-fi
-
-function switch_repo_to_peridot() {
-  ID="$1"
-  # https://yumrepofs.build.resf.org/v1/projects/${ID}/repo/
-  pushd repositories || { echo "not found"; exit 1; }
-  sed -i "s;ZZ_INTERNAL_BaseOS_REPO_URL_ZZ;https://yumrepofs.build.resf.org/v1/projects/${ID}/repo/BaseOS/\$basearch;g" core-peridot.xml
-  sed -i "s;ZZ_INTERNAL_AppStream_REPO_URL_ZZ;https://yumrepofs.build.resf.org/v1/projects/${ID}/repo/AppStream/\$basearch;g" core-peridot.xml
-  sed -i "s;ZZ_INTERNAL_CRB_REPO_URL_ZZ;https://yumrepofs.build.resf.org/v1/projects/${ID}/repo/CRB/\$basearch;g" core-peridot.xml
-  sed -i "s;ZZ_INTERNAL_extras_REPO_URL_ZZ;https://yumrepofs.build.resf.org/v1/projects/${ID}/repo/extras/\$basearch;g" core-peridot.xml
-  rm core.xml
-  ln -sf core-peridot.xml core.xml
-  popd
-}
-
-function main() {
-  #/bin/rm config.xml
-  #if [ ! -f "configs/rocky-live-${LIVE,,}.xml" ]; then
-  #  echo "${LIVE} was not found. Is it supported?"
-  #  exit 42
-  #fi
-  #ln -sf "configs/rocky-live-${LIVE,,}.xml" config.xml
-  ln -sf "configs/rocky.xml" config.xml
-
-  if [ -n "$PERIDOTID" ]; then
-    switch_repo_to_peridot "${PERIDOTID}"
-  fi
-
-  # shellcheck disable=SC2086
-  kiwi-ng $DEBUG --type="oci" --profile="Container-$CONTAINER" --color-output system build --description="$SCRDIR" --target-dir "$OUTPUTDIR"
-}
-
-main
--- a/container/container.xml
+++ b/container/container.xml
@ -1,313 +0,0 @@
-<image>
-  <profiles>
-    <profile name="Core-Container" description="Container Core Packages">
-    </profile>
-    <profile name="Container-Base" description="Container Base Image">
-      <requires profile="Core-Container"/>
-    </profile>
-    <profile name="Container-Minimal" description="Minimal Container Image">
-      <requires profile="Core-Container"/>
-    </profile>
-    <profile name="Container-UBI" description="UBI Container Image">
-      <requires profile="Core-Container"/>
-    </profile>
-    <!-- The base container is the starting point, but we have additional
-         packages to deal with. So this is a standalone profile. -->
-    <profile name="Container-Toolbox" description="Toolbox Container Image">
-    </profile>
-    <!-- ... -->
-  </profiles>
-
-  <preferences profiles="Container-Base">
-    <type image="oci">
-      <containerconfig
-        name="rockylinux"
-        tag="9"
-        maintainer="Release Engineering (SIG/Core)">
-        <subcommand execute="/bin/bash"/>
-        <labels>
-          <label name="org.opencontainers.image.vendor" value="Rocky Enterprise Software Foundation"/>
-          <label name="org.opencontainers.image.url" value="https://github.com/rocky-linux/rocky-toolbox-images"/>
-          <label name="org.opencontainers.image.license" value="BSD-3-Clause"/>
-          <label name="org.opencontainers.image.name" value="rockylinux"/>
-          <label name="org.opencontainers.image.version" value="9"/>
-          <label name="org.opencontainers.image.authors" value="Magauer Lukas, Neil Hanlon, Louis Abel"/>
-          <label name="vendor" value="Rocky Enterprise Software Foundation"/>
-          <label name="license" value="BSD-3-Clause"/>
-          <label name="name" value="rockylinux"/>
-          <label name="version" value="9"/>
-        </labels>
-      </containerconfig>
-    </type>
-    <timezone>Etc/UTC</timezone>
-    <locale>en_US</locale>
-    <rpm-locale-filtering>true</rpm-locale-filtering>
-    <rpm-excludedocs>true</rpm-excludedocs>
-  </preferences>
-
-  <preferences profiles="Container-Minimal">
-    <type image="oci">
-      <containerconfig
-        name="rockylinux"
-        tag="9-minimal"
-        maintainer="Release Engineering (SIG/Core)">
-        <subcommand execute="/bin/bash"/>
-        <labels>
-          <label name="org.opencontainers.image.vendor" value="Rocky Enterprise Software Foundation"/>
-          <label name="org.opencontainers.image.url" value="https://github.com/rocky-linux/rocky-toolbox-images"/>
-          <label name="org.opencontainers.image.license" value="BSD-3-Clause"/>
-          <label name="org.opencontainers.image.name" value="rockylinux"/>
-          <label name="org.opencontainers.image.version" value="9-minimal"/>
-          <label name="org.opencontainers.image.authors" value="Magauer Lukas, Neil Hanlon, Louis Abel"/>
-          <label name="vendor" value="Rocky Enterprise Software Foundation"/>
-          <label name="license" value="BSD-3-Clause"/>
-          <label name="name" value="rockylinux"/>
-          <label name="version" value="9-minimal"/>
-        </labels>
-      </containerconfig>
-    </type>
-    <timezone>Etc/UTC</timezone>
-    <locale>en_US</locale>
-    <rpm-locale-filtering>true</rpm-locale-filtering>
-    <rpm-excludedocs>true</rpm-excludedocs>
-    <packagemanager>microdnf</packagemanager>
-  </preferences>
-
-  <preferences profiles="Container-UBI">
-    <type image="oci">
-      <containerconfig
-        name="rockylinux"
-        tag="9-UBI"
-        maintainer="Release Engineering (SIG/Core)">
-        <subcommand execute="/bin/bash"/>
-        <labels>
-          <label name="org.opencontainers.image.vendor" value="Rocky Enterprise Software Foundation"/>
-          <label name="org.opencontainers.image.url" value="https://github.com/rocky-linux/rocky-toolbox-images"/>
-          <label name="org.opencontainers.image.license" value="BSD-3-Clause"/>
-          <label name="org.opencontainers.image.name" value="rockylinux"/>
-          <label name="org.opencontainers.image.version" value="9-UBI"/>
-          <label name="org.opencontainers.image.authors" value="Magauer Lukas, Neil Hanlon, Louis Abel"/>
-          <label name="vendor" value="Rocky Enterprise Software Foundation"/>
-          <label name="license" value="BSD-3-Clause"/>
-          <label name="name" value="rockylinux"/>
-          <label name="version" value="9-UBI"/>
-        </labels>
-      </containerconfig>
-    </type>
-    <timezone>Etc/UTC</timezone>
-    <locale>en_US</locale>
-    <rpm-locale-filtering>true</rpm-locale-filtering>
-    <rpm-excludedocs>true</rpm-excludedocs>
-  </preferences>
-
-  <preferences profiles="Container-Toolbox">
-    <type image="oci">
-      <containerconfig
-        name="rocky-toolbox"
-        tag="9"
-        maintainer="Release Engineering (SIG/Core)">
-        <subcommand execute="/bin/bash"/>
-        <labels>
-          <label name="org.opencontainers.image.vendor" value="Rocky Enterprise Software Foundation"/>
-          <label name="org.opencontainers.image.url" value="https://github.com/rocky-linux/rocky-toolbox-images"/>
-          <label name="org.opencontainers.image.license" value="BSD-3-Clause"/>
-          <label name="org.opencontainers.image.name" value="rocky-toolbox"/>
-          <label name="org.opencontainers.image.version" value="9"/>
-          <label name="org.opencontainers.image.authors" value="Magauer Lukas, Neil Hanlon, Louis Abel"/>
-          <label name="vendor" value="Rocky Enterprise Software Foundation"/>
-          <label name="license" value="BSD-3-Clause"/>
-          <label name="name" value="rocky-toolbox"/>
-          <label name="version" value="9"/>
-        </labels>
-      </containerconfig>
-    </type>
-    <timezone>Etc/UTC</timezone>
-    <locale>en_US</locale>
-    <rpm-locale-filtering>true</rpm-locale-filtering>
-    <rpm-excludedocs>true</rpm-excludedocs>
-  </preferences>
-
-  <!-- Core package installation. This affects everything except for the
-       toolbox container. -->
-  <packages type="bootstrap" profiles="Core-Container">
-    <package name="bash"/>
-    <package name="coreutils-single"/>
-    <package name="glibc-minimal-langpack"/>
-    <package name="rocky-release"/>
-    <package name="util-linux"/>
-    <ignore name="*-firmware"/>
-    <ignore name="dosfstools"/>
-    <ignore name="e2fsprogs"/>
-    <ignore name="firewalld"/>
-    <ignore name="fuse-libs"/>
-    <ignore name="gettext*"/>
-    <ignore name="gnupg2-smime"/>
-    <ignore name="grub*"/>
-    <ignore name="iptables"/>
-    <ignore name="kernel"/>
-    <ignore name="libss"/>
-    <ignore name="os-prober"/>
-    <ignore name="pinentry"/>
-    <ignore name="qemu-guest-agent"/>
-    <ignore name="shared-mime-info"/>
-    <ignore name="trousers"/>
-    <ignore name="xfsprogs"/>
-    <ignore name="xkeyboard-config"/>
-  </packages>
-  <!-- Base -->
-  <packages type="bootstrap" profiles="Container-Base">
-    <package name="binutils"/>
-    <package name="crypto-policies-scripts"/>
-    <package name="curl-minimal"/>
-    <package name="dnf"/>
-    <package name="findutils"/>
-    <package name="gzip"/>
-    <package name="hostname"/>
-    <package name="iputils"/>
-    <package name="less"/>
-    <package name="libcurl-minimal"/>
-    <package name="libusbx"/>
-    <package name="rootfiles"/>
-    <package name="tar"/>
-    <package name="usermode"/>
-    <package name="vim-minimal"/>
-    <package name="yum"/>
-    <ignore name="brotli"/>
-    <ignore name="kexec-tools"/>
-  </packages>
-  <!-- End Base -->
-  <!-- Minimal -->
-  <packages type="bootstrap" profiles="Container-Minimal">
-    <package name="langpacks-core-en"/>
-    <package name="langpacks-core-font-en"/>
-    <package name="langpacks-en"/>
-    <package name="microdnf"/>
-    <ignore name="brotli"/>
-    <ignore name="hostname"/>
-    <ignore name="iputils"/>
-    <ignore name="kexec-tools"/>
-    <ignore name="less"/>
-    <ignore name="rootfiles"/>
-    <ignore name="tar"/>
-    <ignore name="vim-minimal"/>
-    <ignore name="yum"/>
-  </packages>
-  <!-- End Minimal -->
-  <!-- UBI -->
-  <packages type="bootstrap" patternType="plusRecommended" profiles="Container-UBI">
-    <package name="crypto-policies-scripts"/>
-    <package name="curl-minimal"/>
-    <package name="dnf"/>
-    <package name="findutils"/>
-    <package name="gawk-all-langpacks"/>
-    <package name="gdb-gdbserver"/>
-    <package name="glibc-gconv-extra"/>
-    <package name="glibc-langpack-en"/>
-    <package name="gzip"/>
-    <package name="langpacks-en"/>
-    <package name="libcurl-minimal"/>
-    <package name="libxcrypt-compat"/>
-    <package name="python-unversioned-command"/>
-    <package name="rootfiles"/>
-    <package name="rpm-plugin-systemd-inhibit"/>
-    <package name="systemd"/>
-    <package name="tar"/>
-    <package name="vim-minimal"/>
-    <package name="which"/>
-    <package name="yum"/>
-    <ignore name="kexec-tools"/>
-  </packages>
-  <!-- End UBI -->
-  <!-- Toolbox -->
-  <packages type="bootstrap" patternType="plusRecommended" profiles="Container-Toolbox">
-    <package name="acl"/>
-    <package name="bash"/>
-    <package name="bash-completion"/>
-    <package name="bc"/>
-    <package name="bzip2"/>
-    <package name="coreutils-single"/>
-    <package name="curl"/>
-    <package name="diffutils"/>
-    <package name="dnf"/>
-    <package name="dnf-plugins-core"/>
-    <package name="findutils"/>
-    <package name="flatpak-spawn"/>
-    <package name="gawk"/>
-    <package name="git"/>
-    <package name="glibc-minimal-langpack"/>
-    <package name="gnupg"/>
-    <package name="gnupg2-smime"/>
-    <package name="grep"/>
-    <package name="gvfs-client"/>
-    <package name="gzip"/>
-    <package name="hostname"/>
-    <package name="iproute"/>
-    <package name="iputils"/>
-    <package name="keyutils"/>
-    <package name="krb5-libs"/>
-    <package name="langpacks-en"/>
-    <package name="less"/>
-    <package name="libcap"/>
-    <package name="lsof"/>
-    <package name="man-db"/>
-    <package name="man-pages"/>
-    <package name="mlocate"/>
-    <package name="mtr"/>
-    <package name="openssh-clients"/>
-    <package name="openssl"/>
-    <package name="p11-kit"/>
-    <package name="pam"/>
-    <package name="passwd"/>
-    <package name="pigz"/>
-    <package name="procps-ng"/>
-    <package name="python3"/>
-    <package name="rocky-release"/>
-    <package name="rpaste"/>
-    <package name="rpm"/>
-    <package name="rsync"/>
-    <package name="sed"/>
-    <package name="shadow-utils"/>
-    <package name="sudo"/>
-    <package name="systemd"/>
-    <package name="tar"/>
-    <package name="tcpdump"/>
-    <package name="time"/>
-    <package name="traceroute"/>
-    <package name="tree"/>
-    <package name="unzip"/>
-    <package name="util-linux"/>
-    <package name="vte-profile"/>
-    <package name="wget"/>
-    <package name="which"/>
-    <package name="words"/>
-    <package name="xorg-x11-xauth"/>
-    <package name="xz"/>
-    <package name="zip"/>
-    <ignore name="dosfstools"/>
-    <ignore name="e2fsprogs"/>
-    <ignore name="firewalld"/>
-    <ignore name="fuse-libs"/>
-    <ignore name="gettext*"/>
-    <ignore name="geolite2-city"/>
-    <ignore name="geolite2-country"/>
-    <ignore name="grubby"/>
-    <ignore name="iptables"/>
-    <ignore name="kernel"/>
-    <ignore name="*-firmware"/>
-    <ignore name="libss"/>
-    <ignore name="osprober"/>
-    <ignore name="pinentry"/>
-    <ignore name="shared-mime-info"/>
-    <ignore name="sssd-client"/>
-    <ignore name="trousers"/>
-    <ignore name="xfsprogs"/>
-    <ignore name="xkeyboard-config"/>
-  </packages>
-  <packages type="uninstall" profiles="Container-Toolbox">
-    <package name="dracut"/>
-    <package name="pinentry"/>
-    <package name="systemd-resolved"/>
-    <package name="xkeyboard-config"/>
-  </packages>
-  <!-- End Toolbox -->
-</image>
--- a/grub.tmpl
+++ b/grub.tmpl
@ -1,46 +0,0 @@
-# copied from a live built image, and modified to deal with non-uefi
-
-set default="${default_boot}"
-
-if [ "$$grub_platform" == "efi" ]; then
-  function load_video {
-    insmod efi_gop
-    insmod efi_uga
-    insmod video_bochs
-    insmod video_cirrus
-    insmod all_video
-  }
-	set basicgfx="nomodeset"
-else
-	function load_video {
-		insmod all_video
-	}
-	set basicgfx="nomodeset vga=791"
-fi
-
-load_video
-set gfxpayload=keep
-insmod gzio
-insmod part_gpt
-insmod ext2
-
-terminal_input console
-terminal_output ${terminal_output}
-set timeout=${boot_timeout}
-
-search ${search_params}
-
-menuentry 'Start ${title}' --class fedora --class gnu-linux --class gnu --class os {
-  linux ($$root)${bootpath}/${kernel_file} ${boot_options}
-  initrd ($$root)${bootpath}/${initrd_file}
-}
-menuentry 'Test this media & start ${title}' --class fedora --class gnu-linux --class gnu --class os {
-  linux ($$root)${bootpath}/${kernel_file} ${boot_options} rd.live.check
-  initrd ($$root)${bootpath}/${initrd_file}
-}
-submenu "Troubleshooting -->" {
-  menuentry "Start ${title} in basic graphics mode" --class fedora --class gnu-linux --class gnu --class os {
-    linux ($$root)${bootpath}/${kernel_file} ${boot_options} $${basicgfx}
-    initrd ($$root)${bootpath}/${initrd_file}
-  }
-}
--- a/live-build.sh
+++ b/live-build.sh
@ -1,104 +0,0 @@
-#!/bin/bash
-# helps build a quick live image. that way a user doesn't have to use emapandas
-# nor livemedia-creator. mock is probably not necessary, but it's up to you.
-# label@resf.org
-
-set -o errexit
-set -o pipefail
-
-SCRNAME="$(basename "$0")"
-SCRDIR="$(dirname "${BASH_SOURCE[0]}")"
-
-export __usage
-__usage="
-usage: $SCRNAME [OPTIONS]
-
-Options:
-  -o, --output-dir DIR
-  -l, --live-image NAME
-  -m, --minor      NUM
-  -p, --peridot    ID   # optional. will use peridot repos.
-  -d, --debug           # optional
-
-"
-
-OPTS=$(getopt -a -n live-build -o l:,o:,p:,m:,d,h \
-  -l live-image:,output-dir:,peridot:,minor:,debug,help -- "$@")
-
-function is_in_path() {
-  builtin type -P "${1}"
-}
-
-function usage() {
-  echo "$__usage"
-}
-
-eval set -- "$OPTS"
-while :; do
-  case "$1" in
-    -l | --live-image) LIVE="$2"       ; shift 2 ;;
-    -o | --output-dir) OUTPUTDIR="$2"  ; shift 2 ;;
-    -p | --peridot)    PERIDOTID="$2"  ; shift 2 ;;
-    -m | --minor)      MINOR="$2"      ; shift 2 ;;
-    -d | --debug)      DEBUG="--debug" ; shift   ;;
-    -h | --help)       usage                     ;;
-    --) shift ; break ;;
-  esac
-done
-
-if [ -z "$LIVE" ] || [ -z "$OUTPUTDIR" ]; then
-  echo "Options are not set properly."
-  usage
-  exit 12
-fi
-
-if [ -e "/sys/fs/selinux/enforce" ]; then
-  enforce_check="$(cat /sys/fs/selinux/enforce)"
-  if [ "$enforce_check" -eq "1" ]; then
-    echo "Running with selinux enforcing is not recommended."
-    exit 22
-  fi
-fi
-
-is_in_path kiwi-ng &> /dev/null
-ret_val=$?
-
-if [ "$ret_val" -ne "0" ]; then
-  echo "kiwi-ng not found. kiwi packages are likely not installed on this system."
-  exit 32
-fi
-
-function switch_repo_to_peridot() {
-  ID="$1"
-  # https://yumrepofs.build.resf.org/v1/projects/${ID}/repo/
-  pushd repositories || { echo "not found"; exit 1; }
-  sed -i "s;ZZ_INTERNAL_BaseOS_REPO_URL_ZZ;https://yumrepofs.build.resf.org/v1/projects/${ID}/repo/BaseOS/\$basearch;g" core-peridot.xml
-  sed -i "s;ZZ_INTERNAL_AppStream_REPO_URL_ZZ;https://yumrepofs.build.resf.org/v1/projects/${ID}/repo/AppStream/\$basearch;g" core-peridot.xml
-  sed -i "s;ZZ_INTERNAL_CRB_REPO_URL_ZZ;https://yumrepofs.build.resf.org/v1/projects/${ID}/repo/CRB/\$basearch;g" core-peridot.xml
-  sed -i "s;ZZ_INTERNAL_extras_REPO_URL_ZZ;https://yumrepofs.build.resf.org/v1/projects/${ID}/repo/extras/\$basearch;g" core-peridot.xml
-  rm core.xml
-  ln -sf core-peridot.xml core.xml
-  popd
-}
-
-function main() {
-  /bin/rm config.xml
-  if [ ! -f "configs/rocky-live-${LIVE,,}.xml" ]; then
-    echo "${LIVE} was not found. Is it supported?"
-    exit 42
-  fi
-  ln -sf "configs/rocky-live-${LIVE,,}.xml" config.xml
-
-  if [ -n "$PERIDOTID" ]; then
-    switch_repo_to_peridot "${PERIDOTID}"
-  fi
-
-  if [ -n "$MINOR" ]; then
-    sed -i "s/Rocky-9-/Rocky-9-$MINOR-/g" components/live/*.xml
-    sed -i "s/Rocky-9-/Rocky-9.$MINOR-/g" configs/rocky-live-*.xml
-  fi
-
-  kiwi-ng $DEBUG --type="iso" --profile="$LIVE-Live" --color-output system build --description="$SCRDIR" --target-dir "$OUTPUTDIR"
-}
-
-main
--- a/live/cinnamon.xml
+++ b/live/cinnamon.xml
@ -1,12 +0,0 @@
-<image>
-  <profiles>
-    <profile name="Cinnamon-Live" description="Rocky Linux Cinnamon">
-      <requires profile="Live-Base"/>
-      <requires profile="Cinnamon-Desktop"/>
-    </profile>
-  </profiles>
-  <packages type="bootstrap" patternType="plusRecommended" profiles="Cinnamon-Live">
-    <package name="rocky-release"/>
-    <package name="epel-release"/>
-  </packages>
-</image>
--- a/live/kde.xml
+++ b/live/kde.xml
@ -1,12 +0,0 @@
-<image>
-  <profiles>
-    <profile name="KDE-Live" description="Rocky Linux KDE">
-      <requires profile="Live-Base"/>
-      <requires profile="KDE-Desktop"/>
-    </profile>
-  </profiles>
-  <packages type="bootstrap" patternType="plusRecommended" profiles="KDE-Live">
-    <package name="rocky-release"/>
-    <package name="epel-release"/>
-  </packages>
-</image>
--- a/live/mate.xml
+++ b/live/mate.xml
@ -1,12 +0,0 @@
-<image>
-  <profiles>
-    <profile name="MATE-Live" description="Rocky Linux MATE">
-      <requires profile="Live-Base"/>
-      <requires profile="MATE-Desktop"/>
-    </profile>
-  </profiles>
-  <packages type="bootstrap" patternType="plusRecommended" profiles="MATE-Live">
-    <package name="rocky-release"/>
-    <package name="epel-release"/>
-  </packages>
-</image>
--- a/live/workstation-lite.xml
+++ b/live/workstation-lite.xml
@ -1,11 +0,0 @@
-<image>
-  <profiles>
-    <profile name="Workstation-Lite-Live" description="Rocky Linux Workstation-Lite">
-      <requires profile="Live-Base"/>
-      <requires profile="Workstation-Lite-Desktop"/>
-    </profile>
-  </profiles>
-  <packages type="bootstrap" patternType="plusRecommended" profiles="Workstation-Lite-Live">
-    <package name="rocky-release"/>
-  </packages>
-</image>
--- a/live/workstation.xml
+++ b/live/workstation.xml
@ -1,11 +0,0 @@
-<image>
-  <profiles>
-    <profile name="Workstation-Live" description="Rocky Linux Workstation">
-      <requires profile="Live-Base"/>
-      <requires profile="Workstation-Desktop"/>
-    </profile>
-  </profiles>
-  <packages type="bootstrap" patternType="plusRecommended" profiles="Workstation-Live">
-    <package name="rocky-release"/>
-  </packages>
-</image>
--- a/live/xfce.xml
+++ b/live/xfce.xml
@ -1,12 +0,0 @@
-<image>
-  <profiles>
-    <profile name="XFCE-Live" description="Rocky Linux XFCE">
-      <requires profile="Live-Base"/>
-      <requires profile="XFCE-Desktop"/>
-    </profile>
-  </profiles>
-  <packages type="bootstrap" patternType="plusRecommended" profiles="XFCE-Live">
-    <package name="rocky-release"/>
-    <package name="epel-release"/>
-  </packages>
-</image>
--- a/repositories/altarch-common-default.xml
+++ b/repositories/altarch-common-default.xml
@ -1,13 +0,0 @@
-<!-- There isn't a way to exclude packages from a certain repo -->
-<image>
-  <repository type="rpm-md" alias="sig-altarch-common" priority="5">
-    <source path="http://dl.rockylinux.org/stg/sig/$releasever/altarch/$basearch/altarch-common">
-      <signing key="https://git.rockylinux.org/staging/src/rocky-release-altarch/-/raw/r9/SOURCES/RPM-GPG-KEY-Rocky-SIG-AltArch"/>
-    </source>
-  </repository>
-  <repository type="rpm-md" alias="sig-altarch-rockyrpi" priority="5">
-    <source path="http://dl.rockylinux.org/stg/sig/$releasever/altarch/$basearch/altarch-rockyrpi">
-      <signing key="https://git.rockylinux.org/staging/src/rocky-release-altarch/-/raw/r9/SOURCES/RPM-GPG-KEY-Rocky-SIG-AltArch"/>
-    </source>
-  </repository>
-</image>
--- a/repositories/altarch-common.xml
+++ b/repositories/altarch-common.xml
@ -1 +0,0 @@
-altarch-common-default.xml
--- a/repositories/cloud-common-default.xml
+++ b/repositories/cloud-common-default.xml
@ -1,6 +0,0 @@
-<!-- There isn't a way to exclude packages from a certain repo -->
-<image>
-  <repository type="rpm-md" alias="sig-cloud-common" priority="5">
-    <source path="http://dl.rockylinux.org/stg/sig/$releasever/cloud/$basearch/cloud-common"/>
-  </repository>
-</image>
--- a/repositories/cloud-common.xml
+++ b/repositories/cloud-common.xml
@ -1 +0,0 @@
-cloud-common-default.xml
--- a/repositories/core-default.xml
+++ b/repositories/core-default.xml
@ -1,22 +0,0 @@
-<image>
-  <repository type="rpm-md" alias="baseos" priority="1">
-    <source path="https://download.rockylinux.org/stg/rocky/$releasever/BaseOS/$basearch/os">
-      <signing key="file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-$releasever"/>
-    </source>
-  </repository>
-  <repository type="rpm-md" alias="appstream" priority="1">
-    <source path="https://download.rockylinux.org/stg/rocky/$releasever/AppStream/$basearch/os">
-      <signing key="file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-$releasever"/>
-    </source>
-  </repository>
-  <repository type="rpm-md" alias="crb" priority="1">
-    <source path="https://download.rockylinux.org/stg/rocky/$releasever/CRB/$basearch/os">
-      <signing key="file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-$releasever"/>
-    </source>
-  </repository>
-  <repository type="rpm-md" alias="extras" priority="1">
-    <source path="https://download.rockylinux.org/stg/rocky/$releasever/extras/$basearch/os">
-      <signing key="file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-$releasever"/>
-    </source>
-  </repository>
-</image>
--- a/repositories/core-outside.xml
+++ b/repositories/core-outside.xml
@ -1,22 +0,0 @@
-<image>
-  <repository type="rpm-md" alias="baseos" priority="1">
-    <source path="https://download.rockylinux.org/stg/rocky/$releasever/BaseOS/$basearch/os">
-      <signing key="file:///usr/share/distribution-gpg-keys/rocky/RPM-GPG-KEY-Rocky-$releasever"/>
-    </source>
-  </repository>
-  <repository type="rpm-md" alias="appstream" priority="1">
-    <source path="https://download.rockylinux.org/stg/rocky/$releasever/AppStream/$basearch/os">
-      <signing key="file:///usr/share/distribution-gpg-keys/rocky/RPM-GPG-KEY-Rocky-$releasever"/>
-    </source>
-  </repository>
-  <repository type="rpm-md" alias="crb" priority="1">
-    <source path="https://download.rockylinux.org/stg/rocky/$releasever/CRB/$basearch/os">
-      <signing key="file:///usr/share/distribution-gpg-keys/rocky/RPM-GPG-KEY-Rocky-$releasever"/>
-    </source>
-  </repository>
-  <repository type="rpm-md" alias="extras" priority="1">
-    <source path="https://download.rockylinux.org/stg/rocky/$releasever/extras/$basearch/os">
-      <signing key="file:///usr/share/distribution-gpg-keys/rocky/RPM-GPG-KEY-Rocky-$releasever"/>
-    </source>
-  </repository>
-</image>
--- a/repositories/core-peridot.xml
+++ b/repositories/core-peridot.xml
@ -1,22 +0,0 @@
-<image>
-  <repository type="rpm-md" alias="baseos" priority="1">
-    <source path="ZZ_INTERNAL_BaseOS_REPO_URL_ZZ">
-      <signing key="file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-$releasever"/>
-    </source>
-  </repository>
-  <repository type="rpm-md" alias="appstream" priority="1">
-    <source path="ZZ_INTERNAL_AppStream_REPO_URL_ZZ">
-      <signing key="file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-$releasever"/>
-    </source>
-  </repository>
-  <repository type="rpm-md" alias="crb" priority="1">
-    <source path="ZZ_INTERNAL_CRB_REPO_URL_ZZ">
-      <signing key="file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-$releasever"/>
-    </source>
-  </repository>
-  <repository type="rpm-md" alias="extras" priority="1">
-    <source path="ZZ_INTERNAL_extras_REPO_URL_ZZ">
-      <signing key="file:///etc/pki/rpm-gpg/RPM-GPG-KEY-Rocky-$releasever"/>
-    </source>
-  </repository>
-</image>
--- a/repositories/core.xml
+++ b/repositories/core.xml
@ -1 +0,0 @@
-core-default.xml
--- a/repositories/epel-default.xml
+++ b/repositories/epel-default.xml
@ -1,7 +0,0 @@
-<image>
-  <repository type="rpm-md" alias="epel" priority="2">
-    <source path="https://dl.fedoraproject.org/pub/epel/$releasever/Everything/x86_64/">
-      <signing key="file:///etc/pki/rpm-gpg/RPM-GPG-KEY-EPEL-$releasever"/>
-    </source>
-  </repository>
-</image>
--- a/repositories/epel-outside.xml
+++ b/repositories/epel-outside.xml
@ -1,7 +0,0 @@
-<image>
-  <repository type="rpm-md" alias="epel" priority="2">
-    <source path="https://dl.fedoraproject.org/pub/epel/$releasever/Everything/x86_64/">
-      <signing key="file:///usr/share/distribution-gpg-keys/epel/RPM-GPG-KEY-EPEL-$releasever"/>
-    </source>
-  </repository>
-</image>
--- a/repositories/epel.xml
+++ b/repositories/epel.xml
@ -1 +0,0 @@
-epel-default.xml
--- a/repositories/gnulab-tmp.xml
+++ b/repositories/gnulab-tmp.xml
@ -1,12 +0,0 @@
-<!-- There isn't a way to exclude packages from a certain repo -->
-<image>
-  <repository type="rpm-md" alias="gnulab_tmp_1" priority="1">
-    <source path="https://rockyrepos.gnulab.org/gen_aarch64_el$releasever/"/>
-  </repository>
-  <repository type="rpm-md" alias="gnulab_tmp_2" priority="1">
-    <source path="https://rockyrepos.gnulab.org/rpir$releasever/"/>
-  </repository>
-  <repository type="rpm-md" alias="codedude" priority="1">
-    <source path="https://sbccrazy.codedude.us/aarch64_el9/kernel-mainline-sbc/"/>
-  </repository>
-</image>
--- a/repositories/kernel-common-default.xml
+++ b/repositories/kernel-common-default.xml
@ -1,12 +0,0 @@
-<!-- There isn't a way to exclude packages from a certain repo -->
-<image>
-  <repository type="rpm-md" alias="sig-kernel-drivers" priority="5">
-    <source path="http://dl.rockylinux.org/stg/sig/$releasever/kernel/$basearch/kernel-drivers"/>
-  </repository>
-  <repository type="rpm-md" alias="sig-kernel-mainline" priority="5">
-    <source path="http://dl.rockylinux.org/stg/sig/$releasever/kernel/$basearch/kernel-mainline"/>
-  </repository>
-  <repository type="rpm-md" alias="sig-kernel-lts" priority="5">
-    <source path="http://dl.rockylinux.org/stg/sig/$releasever/kernel/$basearch/kernel-lts"/>
-  </repository>
-</image>
--- a/repositories/kernel-common.xml
+++ b/repositories/kernel-common.xml
@ -1 +0,0 @@
-kernel-common-default.xml
--- a/repositories/oracle.xml
+++ b/repositories/oracle.xml
@ -1,6 +0,0 @@
-<!-- There isn't a way to exclude packages from a certain repo -->
-<image>
-  <repository type="rpm-md" alias="oraclelinux-addons" priority="50">
-    <source path="http://yum.oracle.com/repo/OracleLinux/OL$releasever/addons/$basearch/"/>
-  </repository>
-</image>
--- a/repositories/sig-core-default.xml
+++ b/repositories/sig-core-default.xml
@ -1,9 +0,0 @@
-<!-- There isn't a way to exclude packages from a certain repo -->
-<image>
-  <repository type="rpm-md" alias="sig-core-common" priority="5">
-    <source path="http://dl.rockylinux.org/stg/sig/$releasever/core/$basearch/core-common"/>
-  </repository>
-  <repository type="rpm-md" alias="sig-core-infra" priority="5">
-    <source path="http://dl.rockylinux.org/stg/sig/$releasever/core/$basearch/core-infra"/>
-  </repository>
-</image>
--- a/repositories/sig-core.xml
+++ b/repositories/sig-core.xml
@ -1 +0,0 @@
-sig-core-default.xml
--- a/root/etc/fstab.script
+++ b/root/etc/fstab.script
@ -1,3 +0,0 @@
-#!/bin/sh
-# anaconda does this technically.
-gawk -i inplace '$2 == "/boot/efi" { $4 = $4",umask=0077,shortname=winnt" } { print $0 }' /etc/fstab
--- a/root/etc/sysconfig/kernel
+++ b/root/etc/sysconfig/kernel
@ -1,6 +0,0 @@
-# UPDATEDEFAULT specifies if kernel-install should make
-# new kernels the default
-UPDATEDEFAULT=yes
-
-# DEFAULTKERNEL specifies the default kernel package type
-DEFAULTKERNEL=kernel-core
--- a/29
+++ b/29
@ -1,29 +0,0 @@
-#!/bin/bash
-clear
-part=$(mount |grep '^/dev.* / ' |awk '{print $1}')
-if [ -z "\$part" ];then
-    echo "Error detecting rootfs"
-    exit -1
-fi
-dev=$(echo $part|sed 's/[0-9]*$//g')
-devlen=${#dev}
-num=${part:$devlen}
-if [[ "$dev" =~ ^/dev/(mmcblk|nvme[0-9]+n)[0-9]*p$ ]];then
-    dev=${dev:0:-1}
-fi
-if [ ! -x /usr/bin/growpart ];then
-    echo "Please install cloud-utils-growpart (sudo yum install cloud-utils-growpart)"
-    exit -2
-fi
-if [ ! -x /usr/sbin/resize2fs ];then
-    echo "Please install e2fsprogs (sudo yum install e2fsprogs)"
-    exit -3
-fi
-echo $part $dev $num
-
-echo "Extending partition $num to max size ...."
-growpart $dev $num
-echo "Resizing ext4 filesystem ..."
-resize2fs $part
-echo "Done."
-df -h |grep $part
--- a/sbc-build.sh
+++ b/sbc-build.sh
@ -1,106 +0,0 @@
-#!/bin/bash
-# helps build a quick sbc image. that way a user doesn't have to use emapandas
-# nor some other method. mock is probably not necessary, but it's up to you.
-# label@resf.org
-
-set -o errexit
-set -o pipefail
-
-SCRNAME="$(basename "$0")"
-SCRDIR="$(dirname "${BASH_SOURCE[0]}")"
-
-export __usage
-__usage="
-usage: $SCRNAME [OPTIONS]
-
-Options:
-  -o, --output-dir  DIR
-  -c, --sbc-image   NAME
-  -p, --peridot     ID   # optional. will use peridot repos.
-  -d, --debug            # optional
-
-"
-
-OPTS=$(getopt -a -n sbc-build -o c:,o:,p:,d,h \
-  -l sbc-image:,output-dir:,peridot:,debug,help -- "$@")
-
-function is_in_path() {
-  builtin type -P "${1}"
-}
-
-function usage() {
-  echo "$__usage"
-}
-
-eval set -- "$OPTS"
-while :; do
-  case "$1" in
-    -c | --sbc-image)   SBC="$2"        ; shift 2 ;;
-    -o | --output-dir)  OUTPUTDIR="$2"  ; shift 2 ;;
-    -p | --peridot)     PERIDOTID="$2"  ; shift 2 ;;
-    -d | --debug)       DEBUG="--debug" ; shift   ;;
-    -h | --help)        usage                     ;;
-    --) shift ; break ;;
-  esac
-done
-
-if [ -z "$SBC" ] || [ -z "$OUTPUTDIR" ]; then
-  echo "Options are not set properly."
-  usage
-  exit 12
-fi
-
-if [ -e "/sys/fs/selinux/enforce" ]; then
-  enforce_check="$(cat /sys/fs/selinux/enforce)"
-  if [ "$enforce_check" -eq "1" ]; then
-    echo "Running with selinux enforcing is not recommended."
-    exit 22
-  fi
-fi
-
-is_in_path kiwi-ng &> /dev/null
-ret_val=$?
-
-if [ "$ret_val" -ne "0" ]; then
-  echo "kiwi-ng not found. kiwi packages are likely not installed on this system."
-  exit 32
-fi
-
-function switch_repo_to_peridot() {
-  ID="$1"
-  # https://yumrepofs.build.resf.org/v1/projects/${ID}/repo/
-  pushd repositories || { echo "not found"; exit 1; }
-  sed -i "s;ZZ_INTERNAL_BaseOS_REPO_URL_ZZ;https://yumrepofs.build.resf.org/v1/projects/${ID}/repo/BaseOS/\$basearch;g" core-peridot.xml
-  sed -i "s;ZZ_INTERNAL_AppStream_REPO_URL_ZZ;https://yumrepofs.build.resf.org/v1/projects/${ID}/repo/AppStream/\$basearch;g" core-peridot.xml
-  sed -i "s;ZZ_INTERNAL_CRB_REPO_URL_ZZ;https://yumrepofs.build.resf.org/v1/projects/${ID}/repo/CRB/\$basearch;g" core-peridot.xml
-  sed -i "s;ZZ_INTERNAL_extras_REPO_URL_ZZ;https://yumrepofs.build.resf.org/v1/projects/${ID}/repo/extras/\$basearch;g" core-peridot.xml
-  rm core.xml
-  ln -sf core-peridot.xml core.xml
-  popd
-}
-
-function main() {
-  if [[ -e config.xml ]]; then
-      /bin/rm config.xml
-  fi
-  if [ ! -f "configs/rocky-sbc-${SBC,,}.xml" ]; then
-    echo "${LIVE} was not found. Is it supported?"
-    exit 42
-  fi
-  #ln -sf "configs/rocky-sbc-${SBC,,}.xml" config.xml
-
-  if [ -n "$PERIDOTID" ]; then
-    switch_repo_to_peridot "${PERIDOTID}"
-  fi
-  if [[ $SBC == "GenericArm-GPT" ]]; then
-    ln -s configs/rocky-sbc-genericarm-gpt.xml config.xml
-  elif [[ $SBC == "GenericArm-MBR" ]]; then
-    ln -s configs/rocky-sbc-genericarm-mbr.xml config.xml
-  else
-    ln -s configs/rocky-sbc-raspberrypi.xml config.xml
-  fi
-  # shellcheck disable=SC2086
-    kiwi-ng $DEBUG --type="oem" --profile="SBC-$SBC" --color-output system build --description="$SCRDIR" --target-dir "$OUTPUTDIR"
-}
-
-main
--- a/sbc/editbootinstall_genericarm.sh
+++ b/sbc/editbootinstall_genericarm.sh
@ -1,36 +0,0 @@
-#!/bin/bash
-# Modify this script to handle disk changes as needed.
-# Some of this may be incorrect or not needed. You will need to verify this.
-
-set -ex
-
-#diskname="$1"
-#devname="$2"
-#loopname="${devname%*p2}"
-#loopdev=/dev/${loopname#/dev/mapper/*}
-
-# shellcheck disable=SC2034
-image_fs="$1"
-root_partnum="$2"
-root_device="/dev/mapper/loop*p${root_partnum}"
-loop_name="$(basename $root_device | cut -f 1-2 -d 'p')"
-disk_device="/dev/${loop_name}"
-
-# pi's probably don't support GPT.
-
-cat > gdisk.tmp <<-'EOF'
-		x
-		r
-		g
-		t
-		1
-		c
-		w
-		y
-	EOF
-
-  dd if="$disk_device" of=mbrid.bin bs=1 skip=440 count=4
-  gdisk "$disk_device" < gdisk.tmp
-  dd of="$disk_device" if=mbrid.bin bs=1 seek=440 count=4
-  rm -f mbrid.bin
-  rm -rf gdisk.tmp
--- a/sbc/editbootinstall_rpi.sh
+++ b/sbc/editbootinstall_rpi.sh
@ -1,36 +0,0 @@
-#!/bin/bash
-# Modify this script to handle disk changes as needed.
-# Some of this may be incorrect or not needed. You will need to verify this.
-
-set -ex
-
-#diskname="$1"
-#devname="$2"
-#loopname="${devname%*p2}"
-#loopdev=/dev/${loopname#/dev/mapper/*}
-
-# shellcheck disable=SC2034
-image_fs="$1"
-root_partnum="$2"
-root_device="/dev/mapper/loop*p${root_partnum}"
-loop_name="$(basename $root_device | cut -f 1-2 -d 'p')"
-disk_device="/dev/${loop_name}"
-
-# pi's probably don't support GPT.
-
-cat > gdisk.tmp <<-'EOF'
-		x
-		r
-		g
-		t
-		1
-		c
-		w
-		y
-	EOF
-
-  dd if="$disk_device" of=mbrid.bin bs=1 skip=440 count=4
-  gdisk "$disk_device" < gdisk.tmp
-  dd of="$disk_device" if=mbrid.bin bs=1 seek=440 count=4
-  rm -f mbrid.bin
-  rm -rf gdisk.tmp
--- a/sbc/pi.xml
+++ b/sbc/pi.xml
@ -1,47 +0,0 @@
-<image>
-  <profiles>
-    <profile name="Core-Pi" description="Pi Base Packages">
-      <requires profile="Core-Boot"/>
-    </profile>
-    <profile name="SBC-RaspberryPi" description="Raspberry Pi Image">
-      <requires profile="Core-Pi"/>
-    </profile>
-  </profiles>
-  <!-- RPI -->
-  <preferences profiles="SBC-RaspberryPi" arch="aarch64">
-    <type image="oem"
-      filesystem="ext4"
-      bootpartition="true" bootpartsize="1000" bootfilesystem="ext4" efipartsize="100" firmware="efi"
-      kernelcmdline="console=ttyAMA0,115200 console=tty1 root=LABEL=RPIROOT rootfstype=ext4 elevator=deadline rootwait"
-      devicepersistency="by-label"
-      editbootinstall="sbc/editbootinstall_rpi.sh"
-      rootfs_label="RPIROOT">
-      <oemconfig>
-        <oem-resize>false</oem-resize>
-        <oem-skip-verify>true</oem-skip-verify>
-        <oem-swap>true</oem-swap>
-        <oem-swapsize>512</oem-swapsize>
-      </oemconfig>
-      <bootloader name="grub2" console="serial"/>
-    </type>
-  </preferences>
-  <packages type="image" patternType="plusRecommended" profiles="Core-Pi">
-    <namedCollection name="core"/>
-    <package name="rocky-release"/>
-    <package name="rocky-release-altarch"/>
-    <package name="bash-completion"/>
-    <package name="chrony"/>
-    <package name="cloud-utils-growpart"/>
-    <package name="kernel-tools"/>
-    <package name="langpacks-en"/>
-    <package name="glibc-all-langpacks"/>
-    <package name="net-tools"/>
-    <package name="nano"/>
-    <package name="NetworkManager-wifi"/>
-    <package name="rng-tools"/>
-    <package name="vim"/>
-    <package name="rocky-release-rpi"/>
-    <package name="raspberrypi2-firmware"/>
-    <package name="raspberrypi2-kernel4"/>
-  </packages>
-</image>
--- a/sbc/sbc-gpt.xml
+++ b/sbc/sbc-gpt.xml
@ -1,55 +0,0 @@
-<image>
-    <profiles>
-    <profile name="CoreSBC" description="SBC Base Packages">
-	    <requires profile="Core-Boot"/>
-    </profile>
-    <profile name="SBC-GenericArm-GPT" description="Generic ARM Image GPT">
-    <requires profile="CoreSBC"/>
-    </profile>
-  </profiles>
-  <preferences profiles="SBC-GenericArm-GPT" arch="aarch64">
-    <type image="oem"
-      filesystem="ext4"
-      bootpartition="true" bootpartsize="1000" bootfilesystem="ext4" efipartsize="500" firmware="efi"
-      kernelcmdline="root=LABEL=rootfs rootfstype=ext4 elevator=deadline rootwait console=ttyS0"
-      devicepersistency="by-label"
-      rootfs_label="rootfs">
-      <oemconfig>
-        <oem-resize>false</oem-resize>
-        <oem-skip-verify>true</oem-skip-verify>
-        <oem-swap>true</oem-swap>
-        <oem-swapsize>500</oem-swapsize>
-      </oemconfig>
-      <bootloader name="grub2" console="serial"/>
-      <size unit="G">5</size>
-    </type>
-  </preferences>
-  <packages type="image" patternType="plusRecommended" profiles="CoreSBC">
-    <namedCollection name="core"/>
-    <package name="rocky-release"/>
-    <package name="rocky-release-altarch"/>
-    <package name="bash-completion"/>
-    <package name="chrony"/>
-    <package name="cloud-utils-growpart"/>
-    <package name="langpacks-en"/>
-    <package name="glibc-all-langpacks"/>
-    <package name="net-tools"/>
-    <package name="nano"/>
-    <package name="NetworkManager-wifi"/>
-    <package name="rng-tools"/>
-    <package name="vim"/>
-    <package name="bcm2711-firmware"/>
-    <package name="bcm2835-firmware"/>
-    <package name="bcm283x-firmware"/>
-    <package name="bcm283x-overlays"/>
-    <package name="dracut-config-generic"/>
-    <package name="efibootmgr"/>
-    <package name="kernel-mainline-sbc"/>
-    <package name="systemd-udev"/>
-    <package name="uboot-images-armv8"/>
-    <package name="uboot-tools"/>
-    <ignore name="dracut-config-rescue"/>
-    <ignore name="java-11-*"/>
-    <ignore name="kernel-core-6*"/>
-  </packages>
-</image>
--- a/sbc/sbc-mbr.xml
+++ b/sbc/sbc-mbr.xml
@ -1,56 +0,0 @@
-<image>
-    <profiles>
-    <profile name="CoreSBC" description="SBC Base Packages">
-            <requires profile="Core-Boot"/>
-    </profile>
-    <profile name="SBC-GenericArm-MBR" description="Generic ARM Image MBR">
-      <requires profile="CoreSBC"/>
-    </profile>
-  </profiles>
-  <preferences profiles="SBC-GenericArm-MBR" arch="aarch64">
-    <type image="oem"
-      filesystem="ext4"
-      bootpartition="true" bootpartsize="1000" bootfilesystem="ext4" efipartsize="500" firmware="efi"
-      kernelcmdline="root=LABEL=rootfs rootfstype=ext4 elevator=deadline rootwait console=ttyS0"
-	    devicepersistency="by-label"
-	    editbootinstall="sbc/editbootinstall_rpi.sh"
-      rootfs_label="rootfs">
-      <oemconfig>
-        <oem-resize>false</oem-resize>
-        <oem-skip-verify>true</oem-skip-verify>
-        <oem-swap>true</oem-swap>
-        <oem-swapsize>500</oem-swapsize>
-      </oemconfig>
-      <bootloader name="grub2" console="serial"/>
-      <size unit="G">5</size>
-    </type>
-  </preferences>
-  <packages type="image" patternType="plusRecommended" profiles="CoreSBC">
-    <namedCollection name="core"/>
-    <package name="rocky-release"/>
-    <package name="rocky-release-altarch"/>
-    <package name="bash-completion"/>
-    <package name="chrony"/>
-    <package name="cloud-utils-growpart"/>
-    <package name="langpacks-en"/>
-    <package name="glibc-all-langpacks"/>
-    <package name="net-tools"/>
-    <package name="nano"/>
-    <package name="NetworkManager-wifi"/>
-    <package name="rng-tools"/>
-    <package name="vim"/>
-    <package name="bcm2711-firmware"/>
-    <package name="bcm2835-firmware"/>
-    <package name="bcm283x-firmware"/>
-    <package name="bcm283x-overlays"/>
-    <package name="dracut-config-generic"/>
-    <package name="efibootmgr"/>
-    <package name="kernel-mainline-sbc"/>
-    <package name="systemd-udev"/>
-    <package name="uboot-images-armv8"/>
-    <package name="uboot-tools"/>
-    <ignore name="dracut-config-rescue"/>
-    <ignore name="java-11-*"/>
-    <ignore name="kernel-core-6*"/>
-  </packages>
-</image>
--- a/vagrant/vagrant.xml
+++ b/vagrant/vagrant.xml
@ -1,131 +0,0 @@
-<image>
-  <profiles>
-    <profile name="Core-Vagrant" description="Vagrant Core Packages">
-      <requires profile="Core-Boot"/>
-    </profile>
-    <!--
-    <profile name="Vagrant-Hyperv" description="Vagrant Hyperv Image">
-      <requires profile="Core-Vagrant"/>
-    </profile>
-    -->
-    <profile name="Vagrant-Libvirt" description="Vagrant Libvirt Image">
-      <requires profile="Core-Vagrant"/>
-    </profile>
-    <profile name="Vagrant-Vbox" description="Vagrant Vbox Image">
-      <requires profile="Core-Vagrant"/>
-    </profile>
-    <profile name="Vagrant-VMware" description="Vagrant VMware Image">
-      <requires profile="Core-Vagrant"/>
-    </profile>
-  </profiles>
-
-  <users profiles="Core-Vagrant">
-    <user name="vagrant" groups="vagrant" password="vagrant" home="/home/vagrant" pwdformat="plain" />
-    <user name="root" groups="root" password="$5$xyz$DPJRaBL9FrgJhscbvsfpJpNA9c.o4sMBorTsYKIb69." home="/root"/>
-  </users>
-
-  <!--
-  <preferences profiles="Vagrant-Hyperv" arch="x86_64">
-    <type image="oem" format="vagrant"
-      filesystem="xfs"
-      bootpartition="true" bootpartsize="1000" bootfilesystem="xfs" efipartsize="100" firmware="uefi"
-      kernelcmdline="no_timer_check console=tty0 console=ttyS0,115200n8 net.ifnames=0 biosdevname=0 elevator=noop"
-      devicepersistency="by-uuid"
-      rootfs_label="rocky">
-      <oemconfig>
-        <oem-resize>false</oem-resize>
-      </oemconfig>
-      <bootloader name="grub2" timeout="1"/>
-      <size unit="G">10</size>
-      <vagrantconfig provider="hyperv" virtualsize="5"/>
-    </type>
-  </preferences>
-  -->
-  
-  <preferences profiles="Vagrant-Libvirt" arch="x86_64,aarch64">
-    <type image="oem" format="vagrant"
-      filesystem="xfs"
-      bootpartition="true" bootpartsize="1000" bootfilesystem="xfs" efipartsize="100" firmware="uefi"
-      kernelcmdline="no_timer_check console=tty0 console=ttyS0,115200n8 net.ifnames=0 biosdevname=0 elevator=noop"
-      devicepersistency="by-uuid"
-      rootfs_label="rocky">
-      <oemconfig>
-        <oem-resize>false</oem-resize>
-      </oemconfig>
-      <bootloader name="grub2" timeout="1"/>
-      <size unit="G">10</size>
-      <vagrantconfig provider="libvirt" virtualsize="5"/>
-    </type>
-  </preferences>
-
-  <preferences profiles="Vagrant-Vbox" arch="x86_64,aarch64">
-    <type image="oem" format="vagrant"
-      filesystem="xfs"
-      bootpartition="true" bootpartsize="1000" bootfilesystem="xfs" efipartsize="100" firmware="uefi"
-      kernelcmdline="no_timer_check console=tty0 console=ttyS0,115200n8 net.ifnames=0 biosdevname=0 elevator=noop"
-      devicepersistency="by-uuid"
-      rootfs_label="rocky">
-      <oemconfig>
-        <oem-resize>false</oem-resize>
-      </oemconfig>
-      <bootloader name="grub2" timeout="1"/>
-      <size unit="G">10</size>
-      <!-- <vagrantconfig provider="virtualbox" virtualbox_guest_additions_present="true" virtualsize="5"/> -->
-      <vagrantconfig provider="virtualbox" virtualbox_guest_additions_present="false" virtualsize="5"/>
-    </type>
-  </preferences>
-
-  <!-- VMware is made as a libvirt image and converted later. This this profile
-       at your own risk. -->
-  <preferences profiles="Vagrant-VMware" arch="x86_64,aarch64">
-    <type image="oem" format="vagrant"
-      filesystem="xfs"
-      bootpartition="true" bootpartsize="1000" bootfilesystem="xfs" efipartsize="100" firmware="uefi"
-      kernelcmdline="no_timer_check console=tty0 console=ttyS0,115200n8 net.ifnames=0 biosdevname=0 elevator=noop"
-      devicepersistency="by-uuid"
-      rootfs_label="rocky">
-      <oemconfig>
-        <oem-resize>false</oem-resize>
-      </oemconfig>
-      <bootloader name="grub2" timeout="1"/>
-      <size unit="G">10</size>
-      <vagrantconfig provider="libvirt" virtualsize="5"/>
-    </type>
-  </preferences>
-
-  <packages type="image" patternType="plusRecommended" profiles="Core-Vagrant">
-    <namedCollection name="core"/>
-    <ignore name="dracut-config-rescue"/>
-    <ignore name="*-firmware"/>
-    <ignore name="microcode_ctl"/>
-    <ignore name="plymouth"/>
-    <package name="bash-completion"/>
-    <package name="bzip2"/>
-    <package name="chrony"/>
-    <package name="cifs-utils"/>
-    <package name="gdisk"/>
-    <package name="glibc-langpack-en"/>
-    <package name="man-pages"/>
-    <package name="nfs-utils"/>
-    <package name="open-vm-tools"/>
-    <package name="rsync"/>
-    <package name="vim-minimal"/>
-    <package name="yum-utils"/>
-  </packages>
-  <!--
-  <packages type="image" patternType="plusRecommended" profiles="Vagrant-Hyperv">
-    <package name="hyperv-daemons"/>
-  </packages>
-  -->
-  <packages type="image" patternType="plusRecommended" profiles="Vagrant-Libvirt">
-    <package name="hyperv-daemons"/>
-    <package name="qemu-guest-agent"/>
-  </packages>
-  <!-- <packages type="image" patternType="plusRecommended" profiles="Vagrant-Vbox">
-    <package name="virtualbox-guest-additions"/>
-  </packages> -->
-  <!-- Do we need this? I don't see cloud-init in our kickstarts -->
-  <packages type="uninstall" profiles="Core-Vagrant">
-    <package name="cloud-init"/>
-  </packages>
-</image>
--- a/wsl/default.xml
+++ b/wsl/default.xml
@ -1,12 +0,0 @@
-<image>
-  <profiles>
-    <profile name="XFCE-Live" description="Rocky Linux XFCE">
-      <requires profile="Live-Base"/>
-      <requires profile="XFCE-Desktop"/>
-    </profile>
-  </profiles>
-  <packages type="bootstrap" patternType="plusRecommended" profiles="XFCE-Live">
-    <package name="rocky-release"/>
-    <package name="epel-release"/>
-  </packages>
-</image>