codedude/wiki
1
0
Fork 0
forked from sig_altarch/wiki
Code Pull requests Activity

docs/riscv64/visionfive2/visionfive2.md: finalize release version

Browse source 
We have set a minimum firmware version for the VisionFive 2 SBC to
v2.11.5, so now it is time to replace all the placeholders and
"finalize" the links.

The link for the file "sdcard.img" is deliberately set to the release
version v2.8.0 primarily because that is what I used to update both of
my board's firmware. Meaning, it is tested and works as intended.

If someone else from the AltArch SIG uses the sdcard.img file from a
newer release and confirms that they are able to boot it on the older
firmware and update the firmware, by all means, update the version
string on line 72.
This commit is contained in:
Pratham Patel 2023-04-20 05:36:41 +05:30
parent 26b1fdb263
commit 139c2f0aef
1 changed files with 4 additions and 6 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

10
docs/riscv64/visionfive2/visionfive2.md
View file

@ -8,8 +8,6 @@ tags:
- visionfive
---
[MIN_UBOOT_FIRM_VER]: v2.11.5
# The VisionFive 2 SBC's Wiki
The VisionFive 2 SBC is the second generation of SBC in the VisionFive SBC lineup. This lineup of SBCs contains SoCs with the CPUs that use the RISC-V open computing ISA.
@ -64,16 +62,16 @@ Following are the necessary arch/board specific software repositories. These are
## Installation
To install Rocky Linux on the VisionFive 2 SBC, there is one pre-requisite that needs to be satisfied. That is to update the board firmware to [MIN_UBOOT_FIRM_VER].
To install Rocky Linux on the VisionFive 2 SBC, there is one pre-requisite that needs to be satisfied. That is to update the board firmware to v2.11.5.
**Editor's note: StarFive (the hardware vendor) is almost done sending in mainlining patches for u-boot and we should be able to switch to upstream u-boot soon. Our u-boot package for the VisionFive 2 should automatically update the board firmware to whatever version we support. But the following section is present nonetheless, for the users who have an outdated firmware than what we (Rocky Linux) have a minimum spec bar for.**
### Pre-requisite: Update board firmware
1. Download the following files:
- [sdcard.img](https://github.com/starfive-tech/VisionFive2/releases/download/[MIN_UBOOT_FIRM_VER]/sdcard.img)
- [u-boot-spl.bin.normal.out](https://github.com/starfive-tech/VisionFive2/releases/download/[MIN_UBOOT_FIRM_VER]/u-boot-spl.bin.normal.out)
- [visionfive2_fw_payload.img](https://github.com/starfive-tech/VisionFive2/releases/download/[MIN_UBOOT_FIRM_VER]/visionfive2_fw_payload.img)
- [sdcard.img](https://github.com/starfive-tech/VisionFive2/releases/download/VF2_v2.8.0/sdcard.img) (this image is from release v2.8.0)
- [u-boot-spl.bin.normal.out](https://github.com/starfive-tech/VisionFive2/releases/download/VF2_v2.11.5/u-boot-spl.bin.normal.out)
- [visionfive2_fw_payload.img](https://github.com/starfive-tech/VisionFive2/releases/download/VF2_v2.11.5/visionfive2_fw_payload.img)
2. `sudo dd if=sdcard.img conv=sync status=progress bs=1M of=/dev/sdX`