simplify banner

files/etc/authselect/custom/sssd-rocky/RedHat-9-nsswitch.conf

@@ -0,0 +1,6 @@
+passwd:     {if "with-files-domain":sss files|files sss} systemd   {exclude if "with-custom-passwd"}
+group:      {if "with-files-domain":sss files|files sss} systemd   {exclude if "with-custom-group"}
+netgroup:   sss files           {exclude if "with-custom-netgroup"}
+automount:  sss files           {exclude if "with-custom-automount"}
+services:   sss files           {exclude if "with-custom-services"}
+sudoers:    files sss           {include if "with-sudo"}

files/etc/authselect/custom/sssd-rocky/RedHat-9-system-auth

@@ -0,0 +1,40 @@
+{imply "with-smartcard" if "with-smartcard-required"}
+auth        required                                     pam_env.so
+auth        required                                     pam_faildelay.so delay=2000000
+auth        required                                     pam_faillock.so preauth audit silent deny=5 unlock_time=900 {include if "with-faillock"}
+auth        [success=1 default=ignore]                   pam_succeed_if.so service notin login:gdm:xdm:kdm:xscreensaver:gnome-screensaver:kscreensaver quiet use_uid {include if "with-smartcard-required"}
+auth        [success=done ignore=ignore default=die]     pam_sss.so require_cert_auth ignore_authinfo_unavail   {include if "with-smartcard-required"}
+auth        sufficient                                   pam_fprintd.so                                         {include if "with-fingerprint"}
+auth        sufficient                                   pam_u2f.so cue                                         {include if "with-pam-u2f"}
+auth        required                                     pam_u2f.so cue {if not "without-pam-u2f-nouserok":nouserok} {include if "with-pam-u2f-2fa"}
+auth        [default=1 ignore=ignore success=ok]         pam_usertype.so isregular
+auth        [default=1 ignore=ignore success=ok]         pam_localuser.so                                       {exclude if "with-smartcard"}
+auth        [default=2 ignore=ignore success=ok]         pam_localuser.so                                       {include if "with-smartcard"}
+auth        [success=done authinfo_unavail=ignore ignore=ignore default=die] pam_sss.so try_cert_auth           {include if "with-smartcard"}
+auth        sufficient                                   pam_unix.so {if not "without-nullok":nullok} try_first_pass
+auth        [default=1 ignore=ignore success=ok]         pam_usertype.so isregular
+auth        sufficient                                   pam_sss.so forward_pass
+auth        required                                     pam_faillock.so authfail audit deny=5 unlock_time=900 fail_interval=900       {include if "with-faillock"}
+auth        required                                     pam_deny.so
+
+account     required                                     pam_access.so                                          {include if "with-pamaccess"}
+account     required                                     pam_faillock.so                                        {include if "with-faillock"}
+account     required                                     pam_unix.so
+account     sufficient                                   pam_localuser.so                                       {exclude if "with-files-access-provider"}
+account     sufficient                                   pam_usertype.so issystem
+account     [default=bad success=ok user_unknown=ignore] pam_sss.so
+account     required                                     pam_permit.so
+
+password    requisite                                    pam_pwquality.so try_first_pass local_users_only minlen=14 dcredit=-1 lcredit=-1 ucredit=-1 ocredit=-1 retry=3
+password    requisite                                    pam_pwhistory.so use_authok remember=5
+password    sufficient                                   pam_unix.so sha512 shadow {if not "without-nullok":nullok} try_first_pass use_authtok
+password    sufficient                                   pam_sss.so use_authtok
+password    required                                     pam_deny.so
+
+session     optional                                     pam_keyinit.so revoke
+session     required                                     pam_limits.so
+-session    optional                                     pam_systemd.so
+session     optional                                     pam_oddjob_mkhomedir.so umask=0077                    {include if "with-mkhomedir"}
+session     [success=1 default=ignore]                   pam_succeed_if.so service in crond quiet use_uid
+session     required                                     pam_unix.so
+session     optional                                     pam_sss.so

files/etc/authselect/custom/sssd-rocky/Rocky-9-nsswitch.conf

@@ -0,0 +1 @@
+RedHat-9-nsswitch.conf

files/etc/authselect/custom/sssd-rocky/Rocky-9-system-auth

@@ -0,0 +1 @@
+RedHat-9-system-auth

tasks/ssh_config.yml

@@ -22,6 +22,56 @@
         validate: /usr/sbin/sshd -t -f %s
         backup: true
       notify: restart_sshd
+      when:
+        - ansible_distribution_major_version == '8'
+
+    - name: Ensure an empty file exists
+      ansible.builtin.template:
+        state: touch
+        path: "/etc/ssh/sshd_config.d/99-end.conf"
+        owner: root
+        group: root
+        mode: '0600'
+      notify: restart_sshd
+      when:
+        - ansible_distribution_major_version == '8'
+
+    - name: Ensure sshd_config.d dir exists
+      ansible.builtin.file:
+        state: directory
+        path: "/etc/ssh/sshd_config.d"
+        owner: root
+        group: root
+        mode: '0700'
+      notify: restart_sshd
+
+    - name: Default Modular Configuration
+      when:
+        - (ansible_facts['distribution'] == 'Fedora') or
+          (ansible_facts['distribution'] in el_distro_name and ansible_facts['distribution_major_version']|int >= 9)
+      block:
+        #- name: Modular configuration (redhat)
+        #  template:
+        #    src: "etc/ssh/{{ ansible_distribution }}-{{ ansible_distribution_major_version }}-50-redhat.conf.j2"
+        #    dest: "{{ ssh_modular_config }}"
+        #    owner: root
+        #    group: root
+        #    mode: '0600'
+        #    validate: /usr/sbin/sshd -t -f %s
+        #    backup: yes
+        #  notify: restart_sshd
+
+        - name: Custom Modular Configuration
+          template:
+            src: "etc/ssh/{{ ansible_distribution }}-{{ ansible_distribution_major_version }}-60-infra.conf.j2"
+            dest: "/etc/ssh/sshd_config.d/60-infra.conf"
+            owner: root
+            group: root
+            mode: '0600'
+            validate: /usr/sbin/sshd -t -f %s
+            backup: yes
+          notify: restart_sshd
+
   rescue:
     - name: Print errors for configuration and validation
       debug:
@@ -30,7 +80,7 @@
 - name: SSH banner
   ansible.builtin.copy:
     src: "etc/rockybanner"
-    dest: "/etc/rockybanner"
+    dest: "/etc/banner"
     owner: root
     group: root
     mode: '0644'

templates/etc/audit/rules.d/collection.rules.j2

@@ -0,0 +1,97 @@
+# Ignore CWD logs
+-a exclude,always -F msgtype=CWD
+
+-a always,exit -F arch=b64 -S adjtimex -S settimeofday -k time-change
+-a always,exit -F arch=b32 -S adjtimex -S settimeofday -S stime -k time-change
+-a always,exit -F arch=b64 -S clock_settime -F a0=0x0 -F key=time-change
+-a always,exit -F arch=b32 -S clock_settime -F a0=0x0 -F key=time-change
+-w /etc/localtime -p wa -k time-change
+
+## Records when events occur that modify user and group passwords and ID's
+{% for y in audit_identity_list %}
+-w {{ y }} -p wa -k identity
+{% endfor %}
+
+## Records changes to network environment files or system calls
+-a always,exit -F arch=b64 -S sethostname -S setdomainname -k system-locale
+-a always,exit -F arch=b32 -S sethostname -S setdomainname -k system-locale
+-w /etc/issue -p wa -k system-locale
+-w /etc/issue.net -p wa -k system-locale
+-w /etc/hosts -p wa -k system-locale
+-w /etc/hostname -p wa -k system-locale
+-w /etc/sysconfig/network -p wa -k system-locale
+-a always,exit -F dir=/etc/NetworkManager/ -F perm=wa -F key=system-locale
+
+## Monitors SELinux Mandatory Access Controls
+-w /etc/selinux/ -p wa -k MAC-policy
+-w /usr/share/selinux/ -p wa -k MAC-policy
+
+## Monitors login/logout/failed login events
+# To be fair, these are normally logged in /var/log/secure
+{% for y in audit_logins %}
+-w {{ y }} -p wa -k logins
+{% endfor %}
+
+## Monitor session initiation events
+## This will track file changes within sessions
+{% for y in audit_session %}
+-w {{ y }} -p wa -k session
+{% endfor %}
+
+## Monitor changes for files for UID's above {{ audit_auid }}
+# You can take this out if you are on a non-PCI system
+-a always,exit -F arch=b64 -S chmod -S fchmod -S fchmodat -F auid>={{ audit_auid }} -F auid!=4294967295 -k perm_mod
+-a always,exit -F arch=b32 -S chmod -S fchmod -S fchmodat -F auid>={{ audit_auid }} -F auid!=4294967295 -k perm_mod
+-a always,exit -F arch=b64 -S chown -S fchown -S fchownat -S lchown -F auid>={{ audit_auid }} -F auid!=4294967295 -k perm_mod
+-a always,exit -F arch=b32 -S chown -S fchown -S fchownat -S lchown -F auid>={{ audit_auid }} -F auid!=4294967295 -k perm_mod
+-a always,exit -F arch=b64 -S setxattr -S lsetxattr -S fsetxattr -S removexattr -S lremovexattr -S fremovexattr -F auid>={{ audit_auid }} -F auid!=4294967295 -k perm_mod
+-a always,exit -F arch=b32 -S setxattr -S lsetxattr -S fsetxattr -S removexattr -S lremovexattr -S fremovexattr -F auid>={{ audit_auid }} -F auid!=4294967295 -k perm_mod
+-a always,exit -F arch=b32 -S creat -S open -S openat -S open_by_handle_at -S truncate -S ftruncate -F exit=-EPERM -F auid>={{ audit_auid }} -F auid!=4294967295 -k access
+-a always,exit -F arch=b64 -S creat -S open -S openat -S open_by_handle_at -S truncate -S ftruncate -F exit=-EACCES -F auid>={{ audit_auid }} -F auid!=4294967295 -k access
+-a always,exit -F arch=b32 -S creat -S open -S openat -S open_by_handle_at -S truncate -S ftruncate -F exit=-EACCES -F auid>={{ audit_auid }} -F auid!=4294967295 -k access
+-a always,exit -F arch=b64 -S creat -S open -S openat -S open_by_handle_at -S truncate -S ftruncate -F exit=-EPERM -F auid>={{ audit_auid }} -F auid!=4294967295 -k access
+
+## Monitors mounting events for users
+# You can probably take these out
+-a always,exit -F arch=b64 -S mount -F auid>={{ audit_auid }} -F auid!=4294967295 -k mounts
+-a always,exit -F arch=b32 -S mount -F auid>={{ audit_auid }} -F auid!=4294967295 -k mounts
+## Collect file deletion events by a user
+-a always,exit -F arch=b64 -S rmdir -S unlink -S unlinkat -S rename -S renameat -F auid>={{ audit_auid }} -F auid!=4294967295 -k delete
+-a always,exit -F arch=b32 -S rmdir -S unlink -S unlinkat -S rename -S renameat -F auid>={{ audit_auid }} -F auid!=4294967295 -k delete
+## Collect changes to System Administration Scope
+# Note: This only records /etc/sudoers and doesn't watch /etc/sudoers.d
+-w /etc/sudoers -p wa -k scope
+-w /etc/sudoers.d -p wa -k scope
+## Collect System Administrator Actions (sudolog)
+-w /var/log/sudo.log -p wa -k actions
+## Collect Kernel Module Loading and Unloading
+-w /sbin/kmod -p x -k modules
+-w /sbin/insmod -p x -k modules
+-w /sbin/rmmod -p x -k modules
+-w /sbin/modprobe -p x -k modules
+-a always,exit -F arch=b64 -S init_module,finit_module -S delete_module -k modules
+-a always,exit -F arch=b32 -S init_module,finit_module -S delete_module -k modules
+
+{% for y in audit_suid_list %}
+-a always,exit -F path={{ y }} -F perm=x -F auid>={{ audit_auid }} -F auid!=4294967295 -k privileged
+{% endfor %}
+
+# Is someone messing with our audit logs?
+-w /var/log/audit/ -k audit-logs
+
+-a always,exit -F dir=/var/log/audit/ -F perm=r -F auid>=1000 -F auid!=4294967295 -F key=audit-logs
+-a always,exit -F path=/usr/sbin/ausearch -F perm=x -F key=audit-logs
+-a always,exit -F path=/usr/sbin/aureport -F perm=x -F key=audit-logs
+-a always,exit -F path=/usr/sbin/aulast -F perm=x -F key=audit-logs
+-a always,exit -F path=/usr/sbin/aulastlogin -F perm=x -F key=audit-logs
+-a always,exit -F path=/usr/sbin/auvirt -F perm=x -F key=audit-logs
+
+# Privilege elevation
+-a always,exit -F arch=b64 -S setuid -Fa0=0 -F exe={{ bin_su }} -F key=privileged
+-a always,exit -F arch=b32 -S setuid -Fa0=0 -F exe={{ bin_su }} -F key=privileged
+-a always,exit -F arch=b64 -S setresuid -F a0=0 -F exe={{ bin_sudo }} -F key=privileged
+-a always,exit -F arch=b32 -S setresuid -F a0=0 -F exe={{ bin_sudo }} -F key=privileged
+-a always,exit -F arch=b64 -S execve -C uid!=euid -F euid=0 -F key=privileged
+-a always,exit -F arch=b32 -S execve -C uid!=euid -F euid=0 -F key=privileged
+
+-e 2

templates/etc/chrony.conf.j2

@@ -0,0 +1,37 @@
+# Remote servers for client association.
+{% for s in chrony_timeservers %}
+server {{ s }} iburst {% if loop.first %}prefer{% endif %}
+{% endfor %}
+
+# Ignore stratum in source selection.
+stratumweight 0
+
+# Record the rate at which the system clock gains/losses time.
+driftfile {{ chrony_homedir }}/drift
+
+# Allow the system clock to be stepped in the first three updates
+# if its offset is larger than 1.0 second.
+makestep 1.0 3
+
+# If chrony_server=true allow clients to connect
+{% if chrony_server is sameas true %}
+allow {{ chrony_allow_cidr }}
+bindaddress 0.0.0.0
+{% else %} 
+# Else If Client Deny NTP client access.
+deny all
+{% endif %}
+
+# Allow cmdaccess for localhost only (monitoring sometimes requires this to be opened to mgmt interface)
+bindcmdaddress 127.0.0.1
+bindcmdaddress ::1
+cmdallow
+
+# Send a message to syslog if a clock adjustment is larger than 0.5 seconds.
+logchange 0.5
+
+# Specify directory for log files.
+logdir {{ chrony_logdir }} 
+
+# Enable kernel synchronization of the real-time clock (RTC).
+rtcsync

templates/etc/modprobe.d/cis.conf.j2

@@ -0,0 +1,4 @@
+# Generated by Ansible
+{% for fs in modprobe_unused_filesystems %}
+install {{ fs }} /bin/true
+{% endfor %}

templates/etc/resolv.conf.j2

@@ -0,0 +1,3 @@
+# Generated by Ansible
+search {{ ipareplica_domain }}
+nameserver {{ ipa_dns_master }}

templates/etc/ssh/CentOS-8-sshd_config.j2

@@ -0,0 +1 @@
+RedHat-8-sshd_config.j2

templates/etc/ssh/CentOS-9-sshd_config.j2

@@ -0,0 +1 @@
+RedHat-9-sshd_config.j2

templates/etc/ssh/RedHat-8-sshd_config.j2

@@ -0,0 +1,174 @@
+#	$OpenBSD: sshd_config,v 1.103 2018/04/09 20:41:22 tj Exp $
+
+# This is the sshd server system-wide configuration file.  See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented.  Uncommented options override the
+# default value.
+
+# If you want to change the port on a SELinux system, you have to tell
+# SELinux about this change.
+# semanage port -a -t ssh_port_t -p tcp #PORTNUMBER
+#
+#Port 22
+#AddressFamily any
+#ListenAddress 0.0.0.0
+#ListenAddress ::
+
+HostKey /etc/ssh/ssh_host_rsa_key
+HostKey /etc/ssh/ssh_host_ecdsa_key
+HostKey /etc/ssh/ssh_host_ed25519_key
+
+# Ciphers and keying
+#RekeyLimit default none
+
+# System-wide Crypto policy:
+# This system is following system-wide crypto policy. The changes to
+# Ciphers, MACs, KexAlgoritms and GSSAPIKexAlgorithsm will not have any
+# effect here. They will be overridden by command-line options passed on
+# the server start up.
+# To opt out, uncomment a line with redefinition of  CRYPTO_POLICY=
+# variable in  /etc/sysconfig/sshd  to overwrite the policy.
+# For more information, see manual page for update-crypto-policies(8).
+
+# Logging
+#SyslogFacility AUTH
+SyslogFacility AUTHPRIV
+#LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 2m
+#PermitRootLogin yes
+#StrictModes yes
+#MaxAuthTries 6
+#MaxSessions 10
+
+#PubkeyAuthentication yes
+
+# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
+# but this is overridden so installations will only check .ssh/authorized_keys
+AuthorizedKeysFile	.ssh/authorized_keys
+
+#AuthorizedPrincipalsFile none
+
+#AuthorizedKeysCommand none
+#AuthorizedKeysCommandUser nobody
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# HostbasedAuthentication
+#IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+#PasswordAuthentication yes
+#PermitEmptyPasswords no
+
+# Change to no to disable s/key passwords
+#ChallengeResponseAuthentication yes
+#ChallengeResponseAuthentication no
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+#KerberosUseKuserok yes
+
+# GSSAPI options
+GSSAPIAuthentication yes
+GSSAPICleanupCredentials no
+#GSSAPIStrictAcceptorCheck yes
+#GSSAPIKeyExchange no
+#GSSAPIEnablek5users no
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the ChallengeResponseAuthentication and
+# PasswordAuthentication.  Depending on your PAM configuration,
+# PAM authentication via ChallengeResponseAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and ChallengeResponseAuthentication to 'no'.
+# WARNING: 'UsePAM no' is not supported in Fedora and may cause several
+# problems.
+UsePAM yes
+
+#AllowAgentForwarding yes
+#AllowTcpForwarding yes
+#GatewayPorts no
+X11Forwarding yes
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PermitTTY yes
+
+# It is recommended to use pam_motd in /etc/pam.d/sshd instead of PrintMotd,
+# as it is more configurable and versatile than the built-in version.
+PrintMotd no
+
+#PrintLastLog yes
+#TCPKeepAlive yes
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+#ClientAliveCountMax 3
+#ShowPatchLevel no
+#UseDNS no
+#PidFile /var/run/sshd.pid
+#MaxStartups 10:30:100
+#PermitTunnel no
+#ChrootDirectory none
+#VersionAddendum none
+
+# no default banner path
+#Banner none
+
+# Accept locale-related environment variables
+AcceptEnv LANG LC_CTYPE LC_NUMERIC LC_TIME LC_COLLATE LC_MONETARY LC_MESSAGES
+AcceptEnv LC_PAPER LC_NAME LC_ADDRESS LC_TELEPHONE LC_MEASUREMENT
+AcceptEnv LC_IDENTIFICATION LC_ALL LANGUAGE
+AcceptEnv XMODIFIERS
+
+# override default of no subsystems
+Subsystem	sftp	/usr/libexec/openssh/sftp-server
+
+# Example of overriding settings on a per-user basis
+#Match User anoncvs
+#	X11Forwarding no
+#	AllowTcpForwarding no
+#	PermitTTY no
+#	ForceCommand cvs server
+
+################################################################################
+# Below managed by {{ ansible_managed }}
+#
+Banner /etc/banner
+PermitRootLogin no
+X11Forwarding no
+LoginGraceTime 1m
+
+# FIPS Compliant
+# This has no effect in RHEL 8 or Fedora. However, in the case of compliance
+# higher than that of PCI, it may be a good idea to override it.
+MACs hmac-sha2-512,hmac-sha2-256
+Ciphers aes256-ctr,aes192-ctr,aes128-ctr
+
+# IPA
+AuthorizedKeysCommand /usr/bin/sss_ssh_authorizedkeys
+AuthorizedKeysCommandUser nobody
+ChallengeResponseAuthentication yes
+PasswordAuthentication no
+
+Include /etc/ssh/sshd_config.d/*.conf
+
+{% if 'gitlabservers' in group_names %}
+AllowUsers git@* *@10.*
+{% endif %}

templates/etc/ssh/RedHat-9-60-infra.conf.j2

@@ -0,0 +1,19 @@
+################################################################################
+# Below managed by Rocky Infrastructure
+#
+Banner /etc/banner
+PermitRootLogin no
+Port 22
+X11Forwarding no
+LoginGraceTime 1m
+
+# IPA
+AuthorizedKeysCommand /usr/bin/sss_ssh_authorizedkeys
+AuthorizedKeysCommandUser nobody
+ChallengeResponseAuthentication yes
+
+# IPA Automatic
+PubkeyAuthentication yes
+KerberosAuthentication no
+GSSAPIAuthentication yes
+UsePAM yes

templates/etc/ssh/RedHat-9-sshd_config.j2

@@ -0,0 +1,130 @@
+#	$OpenBSD: sshd_config,v 1.104 2021/07/02 05:11:21 dtucker Exp $
+
+# This is the sshd server system-wide configuration file.  See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented.  Uncommented options override the
+# default value.
+
+# To modify the system-wide sshd configuration, create a  *.conf  file under
+#  /etc/ssh/sshd_config.d/  which will be automatically included below
+Include /etc/ssh/sshd_config.d/*.conf
+
+# If you want to change the port on a SELinux system, you have to tell
+# SELinux about this change.
+# semanage port -a -t ssh_port_t -p tcp #PORTNUMBER
+#
+#Port 22
+#AddressFamily any
+#ListenAddress 0.0.0.0
+#ListenAddress ::
+
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_ecdsa_key
+#HostKey /etc/ssh/ssh_host_ed25519_key
+
+# Ciphers and keying
+#RekeyLimit default none
+
+# Logging
+#SyslogFacility AUTH
+#LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 2m
+#PermitRootLogin prohibit-password
+#StrictModes yes
+#MaxAuthTries 6
+#MaxSessions 10
+
+#PubkeyAuthentication yes
+
+# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
+# but this is overridden so installations will only check .ssh/authorized_keys
+AuthorizedKeysFile	.ssh/authorized_keys
+
+#AuthorizedPrincipalsFile none
+
+#AuthorizedKeysCommand none
+#AuthorizedKeysCommandUser nobody
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# HostbasedAuthentication
+#IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+
+# To disable tunneled clear text passwords, change to no here!
+#PasswordAuthentication yes
+#PermitEmptyPasswords no
+
+# Change to no to disable s/key passwords
+#KbdInteractiveAuthentication yes
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+#KerberosUseKuserok yes
+
+# GSSAPI options
+#GSSAPIAuthentication no
+#GSSAPICleanupCredentials yes
+#GSSAPIStrictAcceptorCheck yes
+#GSSAPIKeyExchange no
+#GSSAPIEnablek5users no
+
+# Set this to 'yes' to enable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the KbdInteractiveAuthentication and
+# PasswordAuthentication.  Depending on your PAM configuration,
+# PAM authentication via KbdInteractiveAuthentication may bypass
+# the setting of "PermitRootLogin without-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and KbdInteractiveAuthentication to 'no'.
+# WARNING: 'UsePAM no' is not supported in Fedora and may cause several
+# problems.
+#UsePAM no
+
+#AllowAgentForwarding yes
+#AllowTcpForwarding yes
+#GatewayPorts no
+#X11Forwarding no
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PermitTTY yes
+#PrintMotd yes
+#PrintLastLog yes
+#TCPKeepAlive yes
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+#ClientAliveCountMax 3
+#UseDNS no
+#PidFile /var/run/sshd.pid
+#MaxStartups 10:30:100
+#PermitTunnel no
+#ChrootDirectory none
+#VersionAddendum none
+
+# no default banner path
+#Banner none
+
+# override default of no subsystems
+Subsystem	sftp	/usr/libexec/openssh/sftp-server
+
+# Example of overriding settings on a per-user basis
+#Match User anoncvs
+#	X11Forwarding no
+#	AllowTcpForwarding no
+#	PermitTTY no
+#	ForceCommand cvs server

templates/etc/ssh/Rocky-8-sshd_config.j2

@@ -0,0 +1 @@
+RedHat-8-sshd_config.j2

templates/etc/ssh/Rocky-9-60-infra.conf.j2

@@ -0,0 +1 @@
+RedHat-9-60-infra.conf.j2

templates/etc/ssh/Rocky-9-sshd_config.j2

@@ -0,0 +1 @@
+RedHat-9-sshd_config.j2

vars/RedHat.yml

@@ -1,6 +1,10 @@
 # Variables for our common module for RedHat
 ---
 
+el_distro_name:
+  - CentOS
+  - Rocky
+
 bin_su: /usr/bin/su
 bin_sudo: /usr/bin/sudo