Rocky-9-Azure-Base.ks

@@ -28,34 +28,15 @@ services --disabled="kdump,rhsmcertd" --enabled="NetworkManager,sshd,rsyslog,chr
 # System bootloader configuration
 bootloader --append="rootdelay=300 console=ttyS0 earlyprintk=ttyS0  no_timer_check crashkernel=auto net.ifnames=0" --location=mbr --timeout=1
 # Clear the Master Boot Record
-#zerombr
+zerombr
 # Partition clearing information
-#clearpart --all --initlabel --disklabel=gpt
+clearpart --all --initlabel --disklabel=gpt
 # Disk partitioning information
-part /boot/efi --size=100  --fstype=efi      --asprimary
+part prepboot --fstype="prepboot" --size=4
-part /boot     --size=1000 --fstype=xfs      --label=boot
+part biosboot --fstype="biosboot" --size=1
-part prepboot  --size=4    --fstype=prepboot --asprimary
+part /boot/efi --fstype="efi" --size=100
-part biosboot  --size=1    --fstype=biosboot --asprimary
+part /boot --fstype="xfs" --size=1000 --label=boot
-part /         --size=8000 --fstype="xfs"    --mkfsoptions "-m bigtime=0,inobtcount=0"
+part / --fstype="xfs" --size=8000 --mkfsoptions="-m bigtime=0,inobtcount=0"
-
-%pre
-# Clear the Master Boot Record
-dd if=/dev/zero of=/dev/vda bs=512 count=1
-# Create a new GPT partition table
-parted /dev/vda mklabel gpt
-# Create a partition for /boot/efi
-parted /dev/vda mkpart primary fat32 1MiB 100MiB
-parted /dev/vda set 1 boot on
-# Create a partition for /boot
-parted /dev/vda mkpart primary xfs 100MiB 1100MiB
-# Create a partition for prep
-parted /dev/vda mkpart primary 1100MiB 1104MiB
-# Create a partition for bios_grub
-parted /dev/vda mkpart primary 1104MiB 1105MiB
-# Create a partition for LVM
-parted /dev/vda mkpart primary xfs 1106MiB 10.7GB
-
-%end
 
 %post --erroronfail
 passwd -d root
@@ -176,7 +157,6 @@ EOL
 echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
 
 # rocky cloud user
-sed -i '1i # Modified for cloud image' /etc/cloud/cloud.cfg
 sed -i 's/name: cloud-user/name: rocky/g' /etc/cloud/cloud.cfg
 echo -e 'rocky\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers
 

Rocky-9-Azure-LVM.ks

@@ -32,34 +32,14 @@ zerombr
 # Partition clearing information
 clearpart --all --initlabel --disklabel=gpt
 # Disk partitioning information
-part /boot/efi --fstype="efi" --onpart=vda1
+part prepboot --fstype="prepboot" --size=4
-part /boot --fstype="xfs" --label=boot --onpart=vda2
+part biosboot --fstype="biosboot" --size=1
-part prepboot --fstype="prepboot" --onpart=vda3
+part /boot/efi --fstype="efi" --size=100
-part biosboot --fstype="biosboot" --onpart=vda4
+part /boot --fstype="xfs" --size=1000 --label=boot
-part pv.01 --grow --ondisk=vda --onpart=vda5
+part pv.01 --grow --ondisk=vda --size=1
 volgroup rocky pv.01
 logvol / --grow --size=8000 --mkfsoptions="-m bigtime=0,inobtcount=0" --name=root --vgname=rocky
 
-%pre
-# Clear the Master Boot Record
-dd if=/dev/zero of=/dev/vda bs=512 count=1
-# Create a new GPT partition table
-parted /dev/vda mklabel gpt
-# Create a partition for /boot/efi
-parted /dev/vda mkpart primary fat32 1MiB 100MiB
-parted /dev/vda set 1 boot on
-# Create a partition for /boot
-parted /dev/vda mkpart primary xfs 100MiB 1100MiB
-# Create a partition for prep
-parted /dev/vda mkpart primary 1100MiB 1104MiB
-# Create a partition for bios_grub
-parted /dev/vda mkpart primary 1104MiB 1105MiB
-# Create a partition for LVM
-parted /dev/vda mkpart primary ext2 1106MiB 10.7GB
-parted /dev/vda set 5 lvm on
-
-%end
-
 %post --erroronfail
 passwd -d root
 passwd -l root
@@ -179,7 +159,6 @@ EOL
 echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
 
 # rocky cloud user
-sed -i '1i # Modified for cloud image' /etc/cloud/cloud.cfg
 sed -i 's/name: cloud-user/name: rocky/g' /etc/cloud/cloud.cfg
 echo -e 'rocky\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers
 

Rocky-9-Cinnamon.ks

@@ -1,503 +0,0 @@
-# Generated by pykickstart v3.41
-#version=DEVEL
-# Firewall configuration
-firewall --enabled --service=mdns
-# Keyboard layouts
-keyboard 'us'
-# System language
-lang en_US.UTF-8
-# Network information
-network  --bootproto=dhcp --device=link --activate
-# Shutdown after installation
-shutdown
-repo --name="BaseOS" --baseurl=http://dl.rockylinux.org/pub/rocky/9/BaseOS/$basearch/os/ --cost=200
-repo --name="AppStream" --baseurl=http://dl.rockylinux.org/pub/rocky/9/AppStream/$basearch/os/ --cost=200
-repo --name="CRB" --baseurl=http://dl.rockylinux.org/pub/rocky/9/CRB/$basearch/os/ --cost=200
-repo --name="extras" --baseurl=http://dl.rockylinux.org/pub/rocky/9/extras/$basearch/os --cost=200
-repo --name="epel" --baseurl=https://dl.fedoraproject.org/pub/epel/9/Everything/$basearch/ --cost=200
-# Root password
-rootpw --iscrypted --lock locked
-# SELinux configuration
-selinux --enforcing
-# System services
-services --disabled="sshd" --enabled="NetworkManager,ModemManager"
-# System timezone
-timezone US/Eastern
-# Use network installation
-url --url="http://dl.rockylinux.org/pub/rocky/9/BaseOS/$basearch/os/"
-# X Window System configuration information
-xconfig  --startxonboot
-# System bootloader configuration
-bootloader --location=none
-# Clear the Master Boot Record
-zerombr
-# Partition clearing information
-clearpart --all
-# Disk partitioning information
-part / --fstype="ext4" --size=5120
-part / --size=8192
-
-%post
-# FIXME: it'd be better to get this installed from a package
-cat > /etc/rc.d/init.d/livesys << EOF
-#!/bin/bash
-#
-# live: Init script for live image
-#
-# chkconfig: 345 00 99
-# description: Init script for live image.
-### BEGIN INIT INFO
-# X-Start-Before: display-manager chronyd
-### END INIT INFO
-
-. /etc/init.d/functions
-
-if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ]; then
-    exit 0
-fi
-
-if [ -e /.liveimg-configured ] ; then
-    configdone=1
-fi
-
-exists() {
-    which \$1 >/dev/null 2>&1 || return
-    \$*
-}
-
-livedir="LiveOS"
-for arg in \`cat /proc/cmdline\` ; do
-  if [ "\${arg##rd.live.dir=}" != "\${arg}" ]; then
-    livedir=\${arg##rd.live.dir=}
-    continue
-  fi
-  if [ "\${arg##live_dir=}" != "\${arg}" ]; then
-    livedir=\${arg##live_dir=}
-  fi
-done
-
-# Enable swap unless requested otherwise
-swaps=\`blkid -t TYPE=swap -o device\`
-if ! strstr "\`cat /proc/cmdline\`" noswap && [ -n "\$swaps" ] ; then
-  for s in \$swaps ; do
-    action "Enabling swap partition \$s" swapon \$s
-  done
-fi
-if ! strstr "\`cat /proc/cmdline\`" noswap && [ -f /run/initramfs/live/\${livedir}/swap.img ] ; then
-  action "Enabling swap file" swapon /run/initramfs/live/\${livedir}/swap.img
-fi
-
-# Support for persistent homes
-mountPersistentHome() {
-  # support label/uuid
-  if [ "\${homedev##LABEL=}" != "\${homedev}" -o "\${homedev##UUID=}" != "\${homedev}" ]; then
-    homedev=\`/sbin/blkid -o device -t "\$homedev"\`
-  fi
-
-  # if we're given a file rather than a blockdev, loopback it
-  if [ "\${homedev##mtd}" != "\${homedev}" ]; then
-    # mtd devs don't have a block device but get magic-mounted with -t jffs2
-    mountopts="-t jffs2"
-  elif [ ! -b "\$homedev" ]; then
-    loopdev=\`losetup -f\`
-    if [ "\${homedev##/run/initramfs/live}" != "\${homedev}" ]; then
-      action "Remounting live store r/w" mount -o remount,rw /run/initramfs/live
-    fi
-    losetup \$loopdev \$homedev
-    homedev=\$loopdev
-  fi
-
-  # if it's encrypted, we need to unlock it
-  if [ "\$(/sbin/blkid -s TYPE -o value \$homedev 2>/dev/null)" = "crypto_LUKS" ]; then
-    echo
-    echo "Setting up encrypted /home device"
-    plymouth ask-for-password --command="cryptsetup luksOpen \$homedev EncHome"
-    homedev=/dev/mapper/EncHome
-  fi
-
-  # and finally do the mount
-  mount \$mountopts \$homedev /home
-  # if we have /home under what's passed for persistent home, then
-  # we should make that the real /home.  useful for mtd device on olpc
-  if [ -d /home/home ]; then mount --bind /home/home /home ; fi
-  [ -x /sbin/restorecon ] && /sbin/restorecon /home
-  if [ -d /home/liveuser ]; then USERADDARGS="-M" ; fi
-}
-
-# Help locate persistent homes
-findPersistentHome() {
-  for arg in \`cat /proc/cmdline\` ; do
-    if [ "\${arg##persistenthome=}" != "\${arg}" ]; then
-      homedev=\${arg##persistenthome=}
-    fi
-  done
-}
-
-if strstr "\`cat /proc/cmdline\`" persistenthome= ; then
-  findPersistentHome
-elif [ -e /run/initramfs/live/\${livedir}/home.img ]; then
-  homedev=/run/initramfs/live/\${livedir}/home.img
-fi
-
-# Mount the persistent home if it's available
-if ! strstr "\`cat /proc/cmdline\`" nopersistenthome && [ -n "\$homedev" ] ; then
-  action "Mounting persistent /home" mountPersistentHome
-fi
-
-if [ -n "\$configdone" ]; then
-  exit 0
-fi
-
-# Create the liveuser (no password) so automatic logins and sudo works
-action "Adding live user" useradd \$USERADDARGS -c "Live System User" liveuser
-passwd -d liveuser > /dev/null
-usermod -aG wheel liveuser > /dev/null
-
-# Same for root
-passwd -d root > /dev/null
-
-# Turn off firstboot (similar to a DVD/minimal install, where it asks
-# for the user to accept the EULA before bringing up a TTY)
-systemctl --no-reload disable firstboot-text.service 2> /dev/null || :
-systemctl --no-reload disable firstboot-graphical.service 2> /dev/null || :
-systemctl stop firstboot-text.service 2> /dev/null || :
-systemctl stop firstboot-graphical.service 2> /dev/null || :
-
-# Prelinking damages the images
-sed -i 's/PRELINKING=yes/PRELINKING=no/' /etc/sysconfig/prelink &>/dev/null || :
-
-# Turn off mdmonitor by default
-systemctl --no-reload disable mdmonitor.service 2> /dev/null || :
-systemctl --no-reload disable mdmonitor-takeover.service 2> /dev/null || :
-systemctl stop mdmonitor.service 2> /dev/null || :
-systemctl stop mdmonitor-takeover.service 2> /dev/null || :
-
-# Even if there isn't gnome, this doesn't hurt.
-gsettings set org.gnome.software download-updates 'false' || :
-
-# Disable cron
-systemctl --no-reload disable crond.service 2> /dev/null || :
-systemctl --no-reload disable atd.service 2> /dev/null || :
-systemctl stop crond.service 2> /dev/null || :
-systemctl stop atd.service 2> /dev/null || :
-
-# Disable abrt
-systemctl --no-reload disable abrtd.service 2> /dev/null || :
-systemctl stop abrtd.service 2> /dev/null || :
-
-# Don't sync the system clock when running live (RHBZ #1018162)
-sed -i 's/rtcsync//' /etc/chrony.conf
-
-# Mark things as configured
-touch /.liveimg-configured
-
-# add static hostname to work around xauth bug
-# https://bugzilla.redhat.com/show_bug.cgi?id=679486
-# the hostname must be something else than 'localhost'
-# https://bugzilla.redhat.com/show_bug.cgi?id=1370222
-echo "localhost-live" > /etc/hostname
-
-EOF
-
-# HAL likes to start late.
-cat > /etc/rc.d/init.d/livesys-late << EOF
-#!/bin/bash
-#
-# live: Late init script for live image
-#
-# chkconfig: 345 99 01
-# description: Late init script for live image.
-
-. /etc/init.d/functions
-
-if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ] || [ -e /.liveimg-late-configured ] ; then
-    exit 0
-fi
-
-exists() {
-    which \$1 >/dev/null 2>&1 || return
-    \$*
-}
-
-touch /.liveimg-late-configured
-
-# Read some stuff out of the kernel cmdline
-for o in \`cat /proc/cmdline\` ; do
-    case \$o in
-    ks=*)
-        ks="--kickstart=\${o#ks=}"
-        ;;
-    xdriver=*)
-        xdriver="\${o#xdriver=}"
-        ;;
-    esac
-done
-
-# If liveinst or textinst is given, start installer
-if strstr "\`cat /proc/cmdline\`" liveinst ; then
-   plymouth --quit
-   /usr/sbin/liveinst \$ks
-fi
-if strstr "\`cat /proc/cmdline\`" textinst ; then
-   plymouth --quit
-   /usr/sbin/liveinst --text \$ks
-fi
-
-# Configure X, allowing user to override xdriver
-if [ -n "\$xdriver" ]; then
-   cat > /etc/X11/xorg.conf.d/00-xdriver.conf <<FOE
-Section "Device"
-	Identifier	"Videocard0"
-	Driver	"\$xdriver"
-EndSection
-FOE
-fi
-
-EOF
-
-chmod 755 /etc/rc.d/init.d/livesys
-/sbin/restorecon /etc/rc.d/init.d/livesys
-/sbin/chkconfig --add livesys
-
-chmod 755 /etc/rc.d/init.d/livesys-late
-/sbin/restorecon /etc/rc.d/init.d/livesys-late
-/sbin/chkconfig --add livesys-late
-
-# Enable tmpfs for /tmp - this is a good idea
-systemctl enable tmp.mount
-
-# make it so that we don't do writing to the overlay for things which
-# are just tmpdirs/caches
-# note https://bugzilla.redhat.com/show_bug.cgi?id=1135475
-cat >> /etc/fstab << EOF
-vartmp   /var/tmp    tmpfs   defaults   0  0
-EOF
-
-# PackageKit likes to play games. Let's fix that.
-rm -f /var/lib/rpm/__db*
-releasever=$(rpm -q --qf '%{version}\n' --whatprovides system-release)
-basearch=$(uname -i)
-rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
-echo "Packages within this LiveCD"
-rpm -qa
-# Note that running rpm recreates the rpm db files which aren't needed or wanted
-rm -f /var/lib/rpm/__db*
-
-# go ahead and pre-make the man -k cache (#455968)
-/usr/bin/mandb
-
-# make sure there aren't core files lying around
-rm -f /core*
-
-# remove random seed, the newly installed instance should make it's own
-rm -f /var/lib/systemd/random-seed
-
-# convince readahead not to collect
-# FIXME: for systemd
-
-echo 'File created by kickstart. See systemd-update-done.service(8).' \
-    | tee /etc/.updated >/var/.updated
-
-# Drop the rescue kernel and initramfs, we don't need them on the live media itself.
-# See bug 1317709
-rm -f /boot/*-rescue*
-
-# Disable network service here, as doing it in the services line
-# fails due to RHBZ #1369794 - the error is expected
-/sbin/chkconfig network off
-
-# Remove machine-id on generated images
-rm -f /etc/machine-id
-touch /etc/machine-id
-
-%end
-
-%post --nochroot
-cp $INSTALL_ROOT/usr/share/licenses/*-release/* $LIVE_ROOT/
-
-# only works on x86_64
-if [ "$(uname -i)" = "i386" -o "$(uname -i)" = "x86_64" ]; then
-    # For livecd-creator builds
-    if [ ! -d $LIVE_ROOT/LiveOS ]; then mkdir -p $LIVE_ROOT/LiveOS ; fi
-    cp /usr/bin/livecd-iso-to-disk $LIVE_ROOT/LiveOS
-
-    # For lorax/livemedia-creator builds
-    sed -i '
-    /## make boot.iso/ i\
-    # Add livecd-iso-to-disk script to .iso filesystem at /LiveOS/\
-    <% f = "usr/bin/livecd-iso-to-disk" %>\
-    %if exists(f):\
-        install ${f} ${LIVEDIR}/${f|basename}\
-    %endif\
-    ' /usr/share/lorax/templates.d/99-generic/live/x86.tmpl
-fi
-
-%end
-
-%post
-# cinnamon configuration
-
-cat > /etc/sysconfig/desktop <<EOF
-PREFERRED=/usr/bin/cinnamon-session
-DISPLAYMANAGER=/usr/sbin/lightdm
-EOF
-
-cat >> /etc/rc.d/init.d/livesys << EOF
-# make the installer show up
-if [ -f /usr/share/applications/liveinst.desktop  ]; then
-  # Show harddisk install in shell dash
-  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
-fi
-mkdir /home/liveuser/Desktop
-cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
-chmod +x /home/liveuser/Desktop/liveinst.desktop
-
-# move to anaconda
-mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
-
-if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop  ]; then
-  mkdir -p ~liveuser/.config/autostart
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
-fi
-
-# set up lightdm autologin
-sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
-sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
-sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
-
-# set cinnamon as default session, otherwise login will fail
-sed -i 's/^#user-session=.*/user-session=cinnamon/' /etc/lightdm/lightdm.conf
-
-# Turn off PackageKit-command-not-found while uninstalled
-if [ -f /etc/PackageKit/CommandNotFound.conf  ]; then
-  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
-fi
-
-# The updater applet might or might not exist
-rm -f /etc/xdg/autostart/org.mageia.dnfdragora-updater.desktop
-
-# reset selinux contexts
-chown -R liveuser:liveuser /home/liveuser/
-restorecon -R /home/liveuser/
-restorecon -R /
-
-EOF
-
-# this doesn't come up automatically. not sure why.
-systemctl enable --force lightdm.service
-
-# CRB needs to be enabled for EPEL to function.
-dnf config-manager --set-enabled crb
-
-%end
-
-%packages
-@anaconda-tools
-@base-x
-@core
-@dial-up
-@fonts
-@guest-desktop-agents
-@hardware-support
-@input-methods
-@multimedia
-@standard
-NetworkManager-adsl
-NetworkManager-bluetooth
-NetworkManager-l2tp-gnome
-NetworkManager-libreswan-gnome
-NetworkManager-openconnect-gnome
-NetworkManager-openvpn-gnome
-NetworkManager-ppp
-NetworkManager-pptp-gnome
-NetworkManager-wifi
-NetworkManager-wwan
-aajohan-comfortaa-fonts
-anaconda
-anaconda-install-env-deps
-anaconda-live
-chkconfig
-cinnamon
-cinnamon-control-center
-cinnamon-screensaver
-dracut-live
-efi-filesystem
-efibootmgr
-efivar-libs
-eom
-epel-release
-f36-backgrounds-extras-gnome
-f36-backgrounds-gnome
-f37-backgrounds-extras-gnome
-f37-backgrounds-gnome
-firefox
-firewall-config
-glibc-all-langpacks
-gnome-calculator
-gnome-disk-utility
-gnome-screenshot
-gnome-system-monitor
-gnome-terminal
-grub2-common
-grub2-efi-*64
-grub2-efi-*64-cdboot
-grub2-pc-modules
-grub2-tools
-grub2-tools-efi
-grub2-tools-extra
-grub2-tools-minimal
-grubby
-gstreamer1-plugins-ugly-free
-gvfs-gphoto2
-gvfs-mtp
-gvfs-smb
-hexchat
-imsettings-systemd
-initial-setup-gui
-initscripts
-kernel
-kernel-modules
-kernel-modules-extra
-libreoffice-calc
-libreoffice-emailmerge
-libreoffice-graphicfilter
-libreoffice-impress
-libreoffice-writer
-lightdm
-memtest86+
-metacity
-nemo-fileroller
-nemo-image-converter
-nemo-preview
-nm-connection-editor
-parole
-pipewire-alsa
-pipewire-pulseaudio
-powerline
-redshift-gtk
-rocky-backgrounds
-sane-backends-drivers-scanners
-setroubleshoot
-shim-*64
-slick-greeter
-slick-greeter-cinnamon
-syslinux
-thunderbird
-tmux
-tmux-powerline
-transmission
-vim-enhanced
-vim-powerline
-wireplumber
-xdg-user-dirs-gtk
-xed
-xreader
--hplip
--isdn4k-utils
--mpage
--shim-unsigned-*64
--xane-gimp
--xsane
-
-%end

Rocky-9-EC2-Base.ks

@@ -15,35 +15,15 @@ services --disabled="kdump,rhsmcertd" --enabled="NetworkManager,sshd,rsyslog,chr
 rootpw --iscrypted thereisnopasswordanditslocked
 
 # Partition Stuff
-#zerombr
+zerombr
-#clearpart --all --initlabel --disklabel=gpt
+clearpart --all --initlabel --disklabel=gpt
 #reqpart
-part /boot/efi --size=100  --fstype=efi      --asprimary
-part /boot     --size=1000 --fstype=xfs      --label=boot
-part prepboot  --size=4    --fstype=prepboot --asprimary
 part biosboot  --size=1    --fstype=biosboot --asprimary
+part /boot/efi --size=100  --fstype=efi      --asprimary
+part /boot     --size=1024 --fstype=xfs      --label=boot
 part /         --size=8000 --fstype="xfs"    --mkfsoptions "-m bigtime=0,inobtcount=0"
 shutdown
 
-%pre
-# Clear the Master Boot Record
-dd if=/dev/zero of=/dev/vda bs=512 count=1
-# Create a new GPT partition table
-parted /dev/vda mklabel gpt
-# Create a partition for /boot/efi
-parted /dev/vda mkpart primary fat32 1MiB 100MiB
-parted /dev/vda set 1 boot on
-# Create a partition for /boot
-parted /dev/vda mkpart primary xfs 100MiB 1100MiB
-# Create a partition for prep
-parted /dev/vda mkpart primary 1100MiB 1104MiB
-# Create a partition for bios_grub
-parted /dev/vda mkpart primary 1104MiB 1105MiB
-# Create a partition for LVM
-parted /dev/vda mkpart primary xfs 1106MiB 10.7GB
-
-%end
-
 %packages
 @core
 rocky-release
@@ -172,7 +152,6 @@ if ! grep -q growpart /etc/cloud/cloud.cfg; then
 fi
 
 # rocky cloud user
-sed -i '1i # Modified for cloud image' /etc/cloud/cloud.cfg
 sed -i 's/name: cloud-user/name: rocky/g' /etc/cloud/cloud.cfg
 echo -e 'rocky\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers
 

Rocky-9-EC2-LVM.ks

@@ -15,38 +15,17 @@ services --disabled="kdump,rhsmcertd" --enabled="NetworkManager,sshd,rsyslog,chr
 rootpw --iscrypted thereisnopasswordanditslocked
 
 # Partition stuff - Should work for x86 and aarch64
-#zerombr
+zerombr
-#clearpart --all --initlabel --disklabel=gpt
+clearpart --all --initlabel --disklabel=gpt
 #reqpart
-part /boot/efi --fstype=efi   --asprimary --onpart=vda1
+part biosboot  --size=1    --fstype=biosboot --asprimary
-part /boot     --fstype=xfs   --label=boot --onpart=vda2
+part /boot/efi --size=100  --fstype=efi   --asprimary
-part prepboot  --fstype=prepboot --asprimary --onpart=vda3
+part /boot     --size=1024 --fstype=xfs   --label=boot
-part biosboot  --fstype=biosboot --asprimary --onpart=vda4
+part pv.01     --size=1    --ondisk=vda   --grow
-part pv.01     --grow --onpart=vda5
 volgroup rocky pv.01
 logvol / --vgname=rocky --size=8000 --name=root --grow --mkfsoptions "-m bigtime=0,inobtcount=0"
 shutdown
 
-%pre
-# Clear the Master Boot Record
-dd if=/dev/zero of=/dev/vda bs=512 count=1
-# Create a new GPT partition table
-parted /dev/vda mklabel gpt
-# Create a partition for /boot/efi
-parted /dev/vda mkpart primary fat32 1MiB 100MiB
-parted /dev/vda set 1 boot on
-# Create a partition for /boot
-parted /dev/vda mkpart primary xfs 100MiB 1100MiB
-# Create a partition for prep
-parted /dev/vda mkpart primary 1100MiB 1104MiB
-# Create a partition for bios_grub
-parted /dev/vda mkpart primary 1104MiB 1105MiB
-# Create a partition for LVM
-parted /dev/vda mkpart primary ext2 1106MiB 10.7GB
-parted /dev/vda set 5 lvm on
-
-%end
-
 %packages
 @core
 rocky-release
@@ -175,7 +154,6 @@ if ! grep -q growpart /etc/cloud/cloud.cfg; then
 fi
 
 # rocky cloud user
-sed -i '1i # Modified for cloud image' /etc/cloud/cloud.cfg
 sed -i 's/name: cloud-user/name: rocky/g' /etc/cloud/cloud.cfg
 echo -e 'rocky\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers
 

Rocky-9-GenericCloud-Base.ks

@@ -20,32 +20,13 @@ clearpart --all --initlabel --disklabel=gpt
 #reqpart
 # This should allow BIOS, UEFI, and PReP booting. Trying to be as universal as
 # possible. This is a similar setup to Fedora without the btrfs.
-part /boot/efi --size=100  --fstype=efi      --asprimary
-part /boot     --size=1000 --fstype=xfs      --label=boot
 part prepboot  --size=4    --fstype=prepboot --asprimary
 part biosboot  --size=1    --fstype=biosboot --asprimary
+part /boot/efi --size=100  --fstype=efi      --asprimary
+part /boot     --size=1000 --fstype=xfs      --label=boot
 part /         --size=8000 --fstype="xfs"    --mkfsoptions "-m bigtime=0,inobtcount=0"
 shutdown
 
-%pre
-# Clear the Master Boot Record
-dd if=/dev/zero of=/dev/vda bs=512 count=1
-# Create a new GPT partition table
-parted /dev/vda mklabel gpt
-# Create a partition for /boot/efi
-parted /dev/vda mkpart primary fat32 1MiB 100MiB
-parted /dev/vda set 1 boot on
-# Create a partition for /boot
-parted /dev/vda mkpart primary xfs 100MiB 1100MiB
-# Create a partition for prep
-parted /dev/vda mkpart primary 1100MiB 1104MiB
-# Create a partition for bios_grub
-parted /dev/vda mkpart primary 1104MiB 1105MiB
-# Create a partition for LVM
-parted /dev/vda mkpart primary xfs 1106MiB 10.7GB
-
-%end
-
 %packages
 @core
 rocky-release
@@ -192,7 +173,6 @@ fi
 sed -i 's/^system_info:/locale: C.UTF-8\nsystem_info:/' /etc/cloud/cloud.cfg
 
 # rocky cloud user
-sed -i '1i # Modified for cloud image' /etc/cloud/cloud.cfg
 echo -e 'rocky\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers
 sed -i 's/name: cloud-user/name: rocky/g' /etc/cloud/cloud.cfg
 

Rocky-9-GenericCloud-LVM.ks

@@ -15,41 +15,21 @@ services --disabled="kdump,rhsmcertd" --enabled="NetworkManager,sshd,rsyslog,chr
 rootpw --iscrypted thereisnopasswordanditslocked
 
 # Partition stuff
-#zerombr
+zerombr
-#clearpart --all --initlabel --disklabel=gpt
+clearpart --all --initlabel --disklabel=gpt
 #reqpart
 # This should allow BIOS, UEFI, and PReP booting. Trying to be as universal as
 # possible. This is a similar setup to Fedora without the btrfs.
-part /boot/efi --fstype=efi      --asprimary  --onpart=vda1
+part prepboot  --size=4    --fstype=prepboot --asprimary
-part /boot     --fstype=xfs      --label=boot  --onpart=vda2
+part biosboot  --size=1    --fstype=biosboot --asprimary
-part prepboot  --fstype=prepboot --asprimary  --onpart=vda3
+part /boot/efi --size=100  --fstype=efi      --asprimary
-part biosboot  --fstype=biosboot --asprimary  --onpart=vda4
+part /boot     --size=1000 --fstype=xfs      --label=boot
-part pv.01     --grow  --onpart=vda5
+part pv.01     --size=1    --ondisk=vda      --grow
 
 volgroup rocky pv.01
 logvol / --vgname=rocky --size=8000 --name=root --grow --mkfsoptions "-m bigtime=0,inobtcount=0"
 shutdown
 
-%pre
-# Clear the Master Boot Record
-dd if=/dev/zero of=/dev/vda bs=512 count=1
-# Create a new GPT partition table
-parted /dev/vda mklabel gpt
-# Create a partition for /boot/efi
-parted /dev/vda mkpart primary fat32 1MiB 100MiB
-parted /dev/vda set 1 boot on
-# Create a partition for /boot
-parted /dev/vda mkpart primary xfs 100MiB 1100MiB
-# Create a partition for prep
-parted /dev/vda mkpart primary 1100MiB 1104MiB
-# Create a partition for bios_grub
-parted /dev/vda mkpart primary 1104MiB 1105MiB
-# Create a partition for LVM
-parted /dev/vda mkpart primary ext2 1106MiB 10.7GB
-parted /dev/vda set 5 lvm on
-
-%end
-
 %packages
 @core
 rocky-release
@@ -196,7 +176,6 @@ fi
 sed -i 's/^system_info:/locale: C.UTF-8\nsystem_info:/' /etc/cloud/cloud.cfg
 
 # rocky cloud user
-sed -i '1i # Modified for cloud image' /etc/cloud/cloud.cfg
 echo -e 'rocky\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers
 sed -i 's/name: cloud-user/name: rocky/g' /etc/cloud/cloud.cfg
 

Rocky-9-KDE.ks

@@ -36,7 +36,7 @@ zerombr
 clearpart --all
 # Disk partitioning information
 part / --fstype="ext4" --size=5120
-part / --size=7300
+part / --size=7000
 
 %post
 # FIXME: it'd be better to get this installed from a package

Rocky-9-OCP.ks

@@ -33,10 +33,10 @@ services --disabled="kdump,rhsmcertd" --enabled="NetworkManager,sshd,rsyslog,chr
 bootloader --append="console=ttyS0,115200n8 console=tty0 no_timer_check crashkernel=auto net.ifnames=0 LANG=en_US.UTF-8 transparent_hugepage=never rd.luks=0 rd.md=0 rd.dm=0 rd.lvm.vg=rocky rd.lvm.lv=rocky/root rd.net.timeout.dhcp=10 libiscsi.debug_libiscsi_eh=1 netroot=iscsi:169.254.0.2:::1:iqn.2015-02.oracle.boot:uefi ip=dhcp rd.iscsi.bypass rd.iscsi.param=node.session.timeo.replacement_timeout=6000" --location=mbr --timeout=1 --boot-drive=vda
 
 # Disk partitioning information
-part /boot/efi --fstype="efi" --onpart=vda1
+part /boot/efi --fstype="efi" --size=100 --onpart=vda3
-part /boot --fstype="xfs" --label=boot --onpart=vda2
+part /boot --fstype="xfs" --size=1000 --label=boot --onpart=vda4
-part prepboot --fstype="prepboot" --onpart=vda3
+part prepboot --fstype="prepboot" --size=4 --onpart=vda1
-part biosboot --fstype="biosboot" --onpart=vda4
+part biosboot --fstype="biosboot" --size=1 --onpart=vda2
 part pv.01 --grow --size=1 --onpart=vda5
 volgroup rocky pv.01
 logvol / --grow --size=8000 --mkfsoptions="-m bigtime=0,inobtcount=0" --name=root --vgname=rocky
@@ -44,21 +44,20 @@ logvol / --grow --size=8000 --mkfsoptions="-m bigtime=0,inobtcount=0" --name=roo
 
 %pre
 # Clear the Master Boot Record
-dd if=/dev/zero of=/dev/vda bs=512 count=1
+dd if=/dev/zero of=/dev/sda bs=512 count=1
 # Create a new GPT partition table
-parted /dev/vda mklabel gpt
+parted /dev/sda mklabel gpt
 # Create a partition for /boot/efi
-parted /dev/vda mkpart primary fat32 1MiB 100MiB
+parted /dev/sda mkpart primary fat32 1MiB 100MiB
-parted /dev/vda set 1 boot on
+parted /dev/sda set 1 boot on
 # Create a partition for /boot
-parted /dev/vda mkpart primary xfs 100MiB 1100MiB
+parted /dev/sda mkpart primary xfs 100MiB 1100MiB
 # Create a partition for prep
-parted /dev/vda mkpart primary 1100MiB 1104MiB 
+parted /dev/sda mkpart primary 4MiB 10.7GB
 # Create a partition for bios_grub
-parted /dev/vda mkpart primary 1104MiB 1105MiB
+parted /dev/sda mkpart primary 1MiB 10.7GB
 # Create a partition for LVM
-parted /dev/vda mkpart primary ext2 1106MiB 10.7GB
+parted /dev/sda3 mkpart primary lvm 1100MiB 10.6GB
-parted /dev/vda set 5 lvm on
 
 %end
 
@@ -137,7 +136,6 @@ EOL
 echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
 
 # rocky cloud user
-sed -i '1i # Modified for cloud image' /etc/cloud/cloud.cfg
 echo -e 'rocky\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers
 sed -i 's/name: cloud-user/name: rocky/g' /etc/cloud/cloud.cfg
 

cloud/rocky-azure-base.ks

@@ -123,7 +123,6 @@ EOL
 echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
 
 # rocky cloud user
-sed -i '1i # Modified for cloud image' /etc/cloud/cloud.cfg
 sed -i 's/name: cloud-user/name: rocky/g' /etc/cloud/cloud.cfg
 echo -e 'rocky\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers
 

cloud/rocky-azure-lvm.ks

@@ -123,7 +123,6 @@ EOL
 echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
 
 # rocky cloud user
-sed -i '1i # Modified for cloud image' /etc/cloud/cloud.cfg
 sed -i 's/name: cloud-user/name: rocky/g' /etc/cloud/cloud.cfg
 echo -e 'rocky\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers
 

cloud/rocky-cloud-parts-base.ks

@@ -1,29 +1,10 @@
-#zerombr
+zerombr
-#clearpart --all --initlabel --disklabel=gpt
+clearpart --all --initlabel --disklabel=gpt
 #reqpart
 # This should allow BIOS, UEFI, and PReP booting. Trying to be as universal as
 # possible. This is a similar setup to Fedora without the btrfs.
-part /boot/efi --size=100  --fstype=efi      --asprimary
-part /boot     --size=1000 --fstype=xfs      --label=boot
 part prepboot  --size=4    --fstype=prepboot --asprimary
 part biosboot  --size=1    --fstype=biosboot --asprimary
+part /boot/efi --size=100  --fstype=efi      --asprimary
+part /boot     --size=1000 --fstype=xfs      --label=boot
 part /         --size=8000 --fstype="xfs"    --mkfsoptions "-m bigtime=0,inobtcount=0"
-
-%pre
-# Clear the Master Boot Record
-dd if=/dev/zero of=/dev/vda bs=512 count=1
-# Create a new GPT partition table
-parted /dev/vda mklabel gpt
-# Create a partition for /boot/efi
-parted /dev/vda mkpart primary fat32 1MiB 100MiB
-parted /dev/vda set 1 boot on
-# Create a partition for /boot
-parted /dev/vda mkpart primary xfs 100MiB 1100MiB
-# Create a partition for prep
-parted /dev/vda mkpart primary 1100MiB 1104MiB
-# Create a partition for bios_grub
-parted /dev/vda mkpart primary 1104MiB 1105MiB
-# Create a partition for LVM
-parted /dev/vda mkpart primary xfs 1106MiB 10.7GB
-
-%end

cloud/rocky-cloud-parts-lvm.ks

@@ -1,33 +1,13 @@
-#zerombr
+zerombr
-#clearpart --all --initlabel --disklabel=gpt
+clearpart --all --initlabel --disklabel=gpt
 #reqpart
 # This should allow BIOS, UEFI, and PReP booting. Trying to be as universal as
 # possible. This is a similar setup to Fedora without the btrfs.
-part /boot/efi --fstype=efi      --asprimary --onpart=vda1
+part prepboot  --size=4    --fstype=prepboot --asprimary
-part /boot     --fstype=xfs      --label=boot --onpart=vda2
+part biosboot  --size=1    --fstype=biosboot --asprimary
-part prepboot  --fstype=prepboot --asprimary --onpart=vda3
+part /boot/efi --size=100  --fstype=efi      --asprimary
-part biosboot  --fstype=biosboot --asprimary --onpart=vda4
+part /boot     --size=1000 --fstype=xfs      --label=boot
-part pv.01     --grow --onpart=vda5
+part pv.01     --size=1    --ondisk=vda      --grow
 
 volgroup rocky pv.01
 logvol / --vgname=rocky --size=8000 --name=root --grow --mkfsoptions "-m bigtime=0,inobtcount=0"
-
-%pre
-# Clear the Master Boot Record
-dd if=/dev/zero of=/dev/vda bs=512 count=1
-# Create a new GPT partition table
-parted /dev/vda mklabel gpt
-# Create a partition for /boot/efi
-parted /dev/vda mkpart primary fat32 1MiB 100MiB
-parted /dev/vda set 1 boot on
-# Create a partition for /boot
-parted /dev/vda mkpart primary xfs 100MiB 1100MiB
-# Create a partition for prep
-parted /dev/vda mkpart primary 1100MiB 1104MiB
-# Create a partition for bios_grub
-parted /dev/vda mkpart primary 1104MiB 1105MiB
-# Create a partition for LVM
-parted /dev/vda mkpart primary ext2 1106MiB 10.7GB
-parted /dev/vda set 5 lvm on
-
-%end

cloud/rocky-ec2-base.ks

@@ -81,7 +81,6 @@ if ! grep -q growpart /etc/cloud/cloud.cfg; then
 fi
 
 # rocky cloud user
-sed -i '1i # Modified for cloud image' /etc/cloud/cloud.cfg
 sed -i 's/name: cloud-user/name: rocky/g' /etc/cloud/cloud.cfg
 echo -e 'rocky\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers
 

cloud/rocky-ec2-lvm.ks

@@ -1,5 +1,5 @@
 %include rocky-cloud-base.ks
-%include rocky-cloud-parts-lvm.ks
+%include rocky-cloud-parts-base.ks
 %include rocky-cloud-base-packages.ks
 
 bootloader --append="console=ttyS0,115200n8 console=tty0 net.ifnames=0 rd.blacklist=nouveau nvme_core.io_timeout=4294967295" --location=mbr --timeout=1
@@ -81,7 +81,6 @@ if ! grep -q growpart /etc/cloud/cloud.cfg; then
 fi
 
 # rocky cloud user
-sed -i '1i # Modified for cloud image' /etc/cloud/cloud.cfg
 sed -i 's/name: cloud-user/name: rocky/g' /etc/cloud/cloud.cfg
 echo -e 'rocky\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers
 

cloud/rocky-genclo-base.ks

@@ -91,7 +91,6 @@ fi
 sed -i 's/^system_info:/locale: C.UTF-8\nsystem_info:/' /etc/cloud/cloud.cfg
 
 # rocky cloud user
-sed -i '1i # Modified for cloud image' /etc/cloud/cloud.cfg
 echo -e 'rocky\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers
 sed -i 's/name: cloud-user/name: rocky/g' /etc/cloud/cloud.cfg
 

cloud/rocky-genclo-lvm.ks

@@ -91,7 +91,6 @@ fi
 sed -i 's/^system_info:/locale: C.UTF-8\nsystem_info:/' /etc/cloud/cloud.cfg
 
 # rocky cloud user
-sed -i '1i # Modified for cloud image' /etc/cloud/cloud.cfg
 echo -e 'rocky\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers
 sed -i 's/name: cloud-user/name: rocky/g' /etc/cloud/cloud.cfg
 

cloud/rocky-ocp.ks

@@ -83,7 +83,6 @@ EOL
 echo "RUN_FIRSTBOOT=NO" > /etc/sysconfig/firstboot
 
 # rocky cloud user
-sed -i '1i # Modified for cloud image' /etc/cloud/cloud.cfg
 echo -e 'rocky\tALL=(ALL)\tNOPASSWD: ALL' >> /etc/sudoers
 sed -i 's/name: cloud-user/name: rocky/g' /etc/cloud/cloud.cfg
 

live/9/aarch64/peridot/rocky-live-cinnamon-common.ks

@@ -1,77 +0,0 @@
-# cinnamon
-%packages
-rocky-backgrounds
-thunderbird
-firefox
-f36-backgrounds-gnome
-f36-backgrounds-extras-gnome
-f37-backgrounds-gnome
-f37-backgrounds-extras-gnome
-
-NetworkManager-adsl
-NetworkManager-bluetooth
-NetworkManager-l2tp-gnome
-NetworkManager-libreswan-gnome
-NetworkManager-openconnect-gnome
-NetworkManager-openvpn-gnome
-NetworkManager-ppp
-NetworkManager-pptp-gnome
-NetworkManager-wifi
-NetworkManager-wwan
-cinnamon
-cinnamon-control-center
-cinnamon-screensaver
-eom
-firewall-config
-gnome-calculator
-gnome-disk-utility
-gnome-screenshot
-gnome-system-monitor
-gnome-terminal
-gstreamer1-plugins-ugly-free
-gvfs-gphoto2
-gvfs-mtp
-gvfs-smb
-hexchat
-imsettings-systemd
-initial-setup-gui
-lightdm
-metacity
-nemo-fileroller
-nemo-image-converter
-nemo-preview
-nm-connection-editor
-pipewire-alsa
-pipewire-pulseaudio
-powerline
-redshift-gtk
-sane-backends-drivers-scanners
-setroubleshoot
-slick-greeter
-slick-greeter-cinnamon
-tmux
-tmux-powerline
-transmission
-vim-enhanced
-vim-powerline
-xdg-user-dirs-gtk
-xed
-xreader
-wireplumber
-
-parole
-#audacious
-#rhythmbox
-
-libreoffice-calc
-libreoffice-emailmerge
-libreoffice-graphicfilter
-libreoffice-impress
-libreoffice-writer
-
--xsane
--xane-gimp
--mpage
--hplip
--isdn4k-utils
-%end

live/9/aarch64/peridot/rocky-live-cinnamon.ks

@@ -1,64 +0,0 @@
-# rocky-live-cinnamon.ks
-
-%include rocky-live-base-spin.ks
-%include rocky-live-cinnamon-common.ks
-
-part / --size 8192
-
-%post
-# cinnamon configuration
-
-cat > /etc/sysconfig/desktop <<EOF
-PREFERRED=/usr/bin/cinnamon-session
-DISPLAYMANAGER=/usr/sbin/lightdm
-EOF
-
-cat >> /etc/rc.d/init.d/livesys << EOF
-# make the installer show up
-if [ -f /usr/share/applications/liveinst.desktop  ]; then
-  # Show harddisk install in shell dash
-  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
-fi
-mkdir /home/liveuser/Desktop
-cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
-chmod +x /home/liveuser/Desktop/liveinst.desktop
-
-# move to anaconda
-mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
-
-if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop  ]; then
-  mkdir -p ~liveuser/.config/autostart
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
-fi
-
-# set up lightdm autologin
-sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
-sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
-sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
-
-# set cinnamon as default session, otherwise login will fail
-sed -i 's/^#user-session=.*/user-session=cinnamon/' /etc/lightdm/lightdm.conf
-
-# Turn off PackageKit-command-not-found while uninstalled
-if [ -f /etc/PackageKit/CommandNotFound.conf  ]; then
-  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
-fi
-
-# The updater applet might or might not exist
-rm -f /etc/xdg/autostart/org.mageia.dnfdragora-updater.desktop
-
-# reset selinux contexts
-chown -R liveuser:liveuser /home/liveuser/
-restorecon -R /home/liveuser/
-restorecon -R /
-
-EOF
-
-# this doesn't come up automatically. not sure why.
-systemctl enable --force lightdm.service
-
-# CRB needs to be enabled for EPEL to function.
-dnf config-manager --set-enabled crb
-
-%end

live/9/aarch64/peridot/rocky-live-kde.ks

@@ -1,9 +1,10 @@
 # rocky-live-kde.ks
+# BROKEN
 
 %include rocky-live-kde-base.ks
 
 # DVD
-part / --size=7300
+part / --size=7000
 
 %post
 %end

live/9/aarch64/peridot/rocky-live-mate-common.ks

@@ -5,8 +5,6 @@ thunderbird
 firefox
 f36-backgrounds-mate
 f36-backgrounds-extras-mate
-f37-backgrounds-mate
-f37-backgrounds-extras-mate
 
 NetworkManager-adsl
 NetworkManager-bluetooth

live/9/aarch64/peridot/rocky-live-xfce-common.ks

@@ -1,7 +1,7 @@
 # xfce
 %packages
 
-# these aren't an epel thing for some reason.
+# these aren't an epel 8 thing for some reason.
 @xfce-desktop --nodefaults
 #@^xfce-desktop-environment
 #@xfce-apps
@@ -34,10 +34,6 @@ gparted
 # extras
 f35-backgrounds-xfce
 f35-backgrounds-extras-xfce
-f36-backgrounds-xfce
-f36-backgrounds-extras-xfce
-f37-backgrounds-xfce
-f37-backgrounds-extras-xfce
 
 xfce4-about
 xfce4-taskmanager

live/9/aarch64/prod/rocky-live-cinnamon-common.ks

@@ -1,77 +0,0 @@
-# cinnamon
-%packages
-rocky-backgrounds
-thunderbird
-firefox
-f36-backgrounds-gnome
-f36-backgrounds-extras-gnome
-f37-backgrounds-gnome
-f37-backgrounds-extras-gnome
-
-NetworkManager-adsl
-NetworkManager-bluetooth
-NetworkManager-l2tp-gnome
-NetworkManager-libreswan-gnome
-NetworkManager-openconnect-gnome
-NetworkManager-openvpn-gnome
-NetworkManager-ppp
-NetworkManager-pptp-gnome
-NetworkManager-wifi
-NetworkManager-wwan
-cinnamon
-cinnamon-control-center
-cinnamon-screensaver
-eom
-firewall-config
-gnome-calculator
-gnome-disk-utility
-gnome-screenshot
-gnome-system-monitor
-gnome-terminal
-gstreamer1-plugins-ugly-free
-gvfs-gphoto2
-gvfs-mtp
-gvfs-smb
-hexchat
-imsettings-systemd
-initial-setup-gui
-lightdm
-metacity
-nemo-fileroller
-nemo-image-converter
-nemo-preview
-nm-connection-editor
-pipewire-alsa
-pipewire-pulseaudio
-powerline
-redshift-gtk
-sane-backends-drivers-scanners
-setroubleshoot
-slick-greeter
-slick-greeter-cinnamon
-tmux
-tmux-powerline
-transmission
-vim-enhanced
-vim-powerline
-xdg-user-dirs-gtk
-xed
-xreader
-wireplumber
-
-parole
-#audacious
-#rhythmbox
-
-libreoffice-calc
-libreoffice-emailmerge
-libreoffice-graphicfilter
-libreoffice-impress
-libreoffice-writer
-
--xsane
--xane-gimp
--mpage
--hplip
--isdn4k-utils
-%end

live/9/aarch64/prod/rocky-live-cinnamon.ks

@@ -1,64 +0,0 @@
-# rocky-live-cinnamon.ks
-
-%include rocky-live-base-spin.ks
-%include rocky-live-cinnamon-common.ks
-
-part / --size 8192
-
-%post
-# cinnamon configuration
-
-cat > /etc/sysconfig/desktop <<EOF
-PREFERRED=/usr/bin/cinnamon-session
-DISPLAYMANAGER=/usr/sbin/lightdm
-EOF
-
-cat >> /etc/rc.d/init.d/livesys << EOF
-# make the installer show up
-if [ -f /usr/share/applications/liveinst.desktop  ]; then
-  # Show harddisk install in shell dash
-  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
-fi
-mkdir /home/liveuser/Desktop
-cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
-chmod +x /home/liveuser/Desktop/liveinst.desktop
-
-# move to anaconda
-mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
-
-if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop  ]; then
-  mkdir -p ~liveuser/.config/autostart
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
-fi
-
-# set up lightdm autologin
-sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
-sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
-sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
-
-# set cinnamon as default session, otherwise login will fail
-sed -i 's/^#user-session=.*/user-session=cinnamon/' /etc/lightdm/lightdm.conf
-
-# Turn off PackageKit-command-not-found while uninstalled
-if [ -f /etc/PackageKit/CommandNotFound.conf  ]; then
-  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
-fi
-
-# The updater applet might or might not exist
-rm -f /etc/xdg/autostart/org.mageia.dnfdragora-updater.desktop
-
-# reset selinux contexts
-chown -R liveuser:liveuser /home/liveuser/
-restorecon -R /home/liveuser/
-restorecon -R /
-
-EOF
-
-# this doesn't come up automatically. not sure why.
-systemctl enable --force lightdm.service
-
-# CRB needs to be enabled for EPEL to function.
-dnf config-manager --set-enabled crb
-
-%end

live/9/aarch64/prod/rocky-live-kde.ks

@@ -1,4 +1,5 @@
 # rocky-live-kde.ks
+# BROKEN
 
 %include rocky-live-kde-base.ks
 

live/9/aarch64/prod/rocky-live-mate-common.ks

@@ -5,8 +5,6 @@ thunderbird
 firefox
 f36-backgrounds-mate
 f36-backgrounds-extras-mate
-f37-backgrounds-mate
-f37-backgrounds-extras-mate
 
 NetworkManager-adsl
 NetworkManager-bluetooth

live/9/aarch64/prod/rocky-live-xfce-common.ks

@@ -1,7 +1,7 @@
 # xfce
 %packages
 
-# these aren't an epel thing for some reason.
+# these aren't an epel 8 thing for some reason.
 @xfce-desktop --nodefaults
 #@^xfce-desktop-environment
 #@xfce-apps
@@ -34,10 +34,6 @@ gparted
 # extras
 f35-backgrounds-xfce
 f35-backgrounds-extras-xfce
-f36-backgrounds-xfce
-f36-backgrounds-extras-xfce
-f37-backgrounds-xfce
-f37-backgrounds-extras-xfce
 
 xfce4-about
 xfce4-taskmanager

live/9/aarch64/stage/rocky-live-cinnamon-common.ks

@@ -1,77 +0,0 @@
-# cinnamon
-%packages
-rocky-backgrounds
-thunderbird
-firefox
-f36-backgrounds-gnome
-f36-backgrounds-extras-gnome
-f37-backgrounds-gnome
-f37-backgrounds-extras-gnome
-
-NetworkManager-adsl
-NetworkManager-bluetooth
-NetworkManager-l2tp-gnome
-NetworkManager-libreswan-gnome
-NetworkManager-openconnect-gnome
-NetworkManager-openvpn-gnome
-NetworkManager-ppp
-NetworkManager-pptp-gnome
-NetworkManager-wifi
-NetworkManager-wwan
-cinnamon
-cinnamon-control-center
-cinnamon-screensaver
-eom
-firewall-config
-gnome-calculator
-gnome-disk-utility
-gnome-screenshot
-gnome-system-monitor
-gnome-terminal
-gstreamer1-plugins-ugly-free
-gvfs-gphoto2
-gvfs-mtp
-gvfs-smb
-hexchat
-imsettings-systemd
-initial-setup-gui
-lightdm
-metacity
-nemo-fileroller
-nemo-image-converter
-nemo-preview
-nm-connection-editor
-pipewire-alsa
-pipewire-pulseaudio
-powerline
-redshift-gtk
-sane-backends-drivers-scanners
-setroubleshoot
-slick-greeter
-slick-greeter-cinnamon
-tmux
-tmux-powerline
-transmission
-vim-enhanced
-vim-powerline
-xdg-user-dirs-gtk
-xed
-xreader
-wireplumber
-
-parole
-#audacious
-#rhythmbox
-
-libreoffice-calc
-libreoffice-emailmerge
-libreoffice-graphicfilter
-libreoffice-impress
-libreoffice-writer
-
--xsane
--xane-gimp
--mpage
--hplip
--isdn4k-utils
-%end

live/9/aarch64/stage/rocky-live-cinnamon.ks

@@ -1,64 +0,0 @@
-# rocky-live-cinnamon.ks
-
-%include rocky-live-base-spin.ks
-%include rocky-live-cinnamon-common.ks
-
-part / --size 8192
-
-%post
-# cinnamon configuration
-
-cat > /etc/sysconfig/desktop <<EOF
-PREFERRED=/usr/bin/cinnamon-session
-DISPLAYMANAGER=/usr/sbin/lightdm
-EOF
-
-cat >> /etc/rc.d/init.d/livesys << EOF
-# make the installer show up
-if [ -f /usr/share/applications/liveinst.desktop  ]; then
-  # Show harddisk install in shell dash
-  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
-fi
-mkdir /home/liveuser/Desktop
-cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
-chmod +x /home/liveuser/Desktop/liveinst.desktop
-
-# move to anaconda
-mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
-
-if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop  ]; then
-  mkdir -p ~liveuser/.config/autostart
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
-fi
-
-# set up lightdm autologin
-sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
-sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
-sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
-
-# set cinnamon as default session, otherwise login will fail
-sed -i 's/^#user-session=.*/user-session=cinnamon/' /etc/lightdm/lightdm.conf
-
-# Turn off PackageKit-command-not-found while uninstalled
-if [ -f /etc/PackageKit/CommandNotFound.conf  ]; then
-  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
-fi
-
-# The updater applet might or might not exist
-rm -f /etc/xdg/autostart/org.mageia.dnfdragora-updater.desktop
-
-# reset selinux contexts
-chown -R liveuser:liveuser /home/liveuser/
-restorecon -R /home/liveuser/
-restorecon -R /
-
-EOF
-
-# this doesn't come up automatically. not sure why.
-systemctl enable --force lightdm.service
-
-# CRB needs to be enabled for EPEL to function.
-dnf config-manager --set-enabled crb
-
-%end

live/9/aarch64/stage/rocky-live-kde.ks

@@ -1,9 +1,10 @@
 # rocky-live-kde.ks
+# BROKEN
 
 %include rocky-live-kde-base.ks
 
 # DVD
-part / --size=7300
+part / --size=7000
 
 %post
 %end

live/9/aarch64/stage/rocky-live-mate-common.ks

@@ -5,8 +5,6 @@ thunderbird
 firefox
 f36-backgrounds-mate
 f36-backgrounds-extras-mate
-f37-backgrounds-mate
-f37-backgrounds-extras-mate
 
 NetworkManager-adsl
 NetworkManager-bluetooth

live/9/aarch64/stage/rocky-live-xfce-common.ks

@@ -1,7 +1,7 @@
 # xfce
 %packages
 
-# these aren't an epel thing for some reason.
+# these aren't an epel 8 thing for some reason.
 @xfce-desktop --nodefaults
 #@^xfce-desktop-environment
 #@xfce-apps
@@ -34,10 +34,6 @@ gparted
 # extras
 f35-backgrounds-xfce
 f35-backgrounds-extras-xfce
-f36-backgrounds-xfce
-f36-backgrounds-extras-xfce
-f37-backgrounds-xfce
-f37-backgrounds-extras-xfce
 
 xfce4-about
 xfce4-taskmanager

live/9/x86_64/peridot/rocky-live-cinnamon-common.ks

@@ -1,77 +0,0 @@
-# cinnamon
-%packages
-rocky-backgrounds
-thunderbird
-firefox
-f36-backgrounds-gnome
-f36-backgrounds-extras-gnome
-f37-backgrounds-gnome
-f37-backgrounds-extras-gnome
-
-NetworkManager-adsl
-NetworkManager-bluetooth
-NetworkManager-l2tp-gnome
-NetworkManager-libreswan-gnome
-NetworkManager-openconnect-gnome
-NetworkManager-openvpn-gnome
-NetworkManager-ppp
-NetworkManager-pptp-gnome
-NetworkManager-wifi
-NetworkManager-wwan
-cinnamon
-cinnamon-control-center
-cinnamon-screensaver
-eom
-firewall-config
-gnome-calculator
-gnome-disk-utility
-gnome-screenshot
-gnome-system-monitor
-gnome-terminal
-gstreamer1-plugins-ugly-free
-gvfs-gphoto2
-gvfs-mtp
-gvfs-smb
-hexchat
-imsettings-systemd
-initial-setup-gui
-lightdm
-metacity
-nemo-fileroller
-nemo-image-converter
-nemo-preview
-nm-connection-editor
-pipewire-alsa
-pipewire-pulseaudio
-powerline
-redshift-gtk
-sane-backends-drivers-scanners
-setroubleshoot
-slick-greeter
-slick-greeter-cinnamon
-tmux
-tmux-powerline
-transmission
-vim-enhanced
-vim-powerline
-xdg-user-dirs-gtk
-xed
-xreader
-wireplumber
-
-parole
-#audacious
-#rhythmbox
-
-libreoffice-calc
-libreoffice-emailmerge
-libreoffice-graphicfilter
-libreoffice-impress
-libreoffice-writer
-
--xsane
--xane-gimp
--mpage
--hplip
--isdn4k-utils
-%end

live/9/x86_64/peridot/rocky-live-cinnamon.ks

@@ -1,64 +0,0 @@
-# rocky-live-cinnamon.ks
-
-%include rocky-live-base-spin.ks
-%include rocky-live-cinnamon-common.ks
-
-part / --size 8192
-
-%post
-# cinnamon configuration
-
-cat > /etc/sysconfig/desktop <<EOF
-PREFERRED=/usr/bin/cinnamon-session
-DISPLAYMANAGER=/usr/sbin/lightdm
-EOF
-
-cat >> /etc/rc.d/init.d/livesys << EOF
-# make the installer show up
-if [ -f /usr/share/applications/liveinst.desktop  ]; then
-  # Show harddisk install in shell dash
-  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
-fi
-mkdir /home/liveuser/Desktop
-cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
-chmod +x /home/liveuser/Desktop/liveinst.desktop
-
-# move to anaconda
-mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
-
-if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop  ]; then
-  mkdir -p ~liveuser/.config/autostart
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
-fi
-
-# set up lightdm autologin
-sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
-sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
-sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
-
-# set cinnamon as default session, otherwise login will fail
-sed -i 's/^#user-session=.*/user-session=cinnamon/' /etc/lightdm/lightdm.conf
-
-# Turn off PackageKit-command-not-found while uninstalled
-if [ -f /etc/PackageKit/CommandNotFound.conf  ]; then
-  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
-fi
-
-# The updater applet might or might not exist
-rm -f /etc/xdg/autostart/org.mageia.dnfdragora-updater.desktop
-
-# reset selinux contexts
-chown -R liveuser:liveuser /home/liveuser/
-restorecon -R /home/liveuser/
-restorecon -R /
-
-EOF
-
-# this doesn't come up automatically. not sure why.
-systemctl enable --force lightdm.service
-
-# CRB needs to be enabled for EPEL to function.
-dnf config-manager --set-enabled crb
-
-%end

live/9/x86_64/peridot/rocky-live-kde.ks

@@ -1,9 +1,10 @@
 # rocky-live-kde.ks
+# BROKEN
 
 %include rocky-live-kde-base.ks
 
 # DVD
-part / --size=7300
+part / --size=7000
 
 %post
 %end

live/9/x86_64/peridot/rocky-live-mate-common.ks

@@ -5,8 +5,6 @@ thunderbird
 firefox
 f36-backgrounds-mate
 f36-backgrounds-extras-mate
-f37-backgrounds-mate
-f37-backgrounds-extras-mate
 
 NetworkManager-adsl
 NetworkManager-bluetooth

live/9/x86_64/peridot/rocky-live-xfce-common.ks

@@ -1,7 +1,7 @@
 # xfce
 %packages
 
-# these aren't an epel thing for some reason.
+# these aren't an epel 8 thing for some reason.
 @xfce-desktop --nodefaults
 #@^xfce-desktop-environment
 #@xfce-apps
@@ -34,10 +34,6 @@ gparted
 # extras
 f35-backgrounds-xfce
 f35-backgrounds-extras-xfce
-f36-backgrounds-xfce
-f36-backgrounds-extras-xfce
-f37-backgrounds-xfce
-f37-backgrounds-extras-xfce
 
 xfce4-about
 xfce4-taskmanager

live/9/x86_64/prod/rocky-live-cinnamon-common.ks

@@ -1,77 +0,0 @@
-# cinnamon
-%packages
-rocky-backgrounds
-thunderbird
-firefox
-f36-backgrounds-gnome
-f36-backgrounds-extras-gnome
-f37-backgrounds-gnome
-f37-backgrounds-extras-gnome
-
-NetworkManager-adsl
-NetworkManager-bluetooth
-NetworkManager-l2tp-gnome
-NetworkManager-libreswan-gnome
-NetworkManager-openconnect-gnome
-NetworkManager-openvpn-gnome
-NetworkManager-ppp
-NetworkManager-pptp-gnome
-NetworkManager-wifi
-NetworkManager-wwan
-cinnamon
-cinnamon-control-center
-cinnamon-screensaver
-eom
-firewall-config
-gnome-calculator
-gnome-disk-utility
-gnome-screenshot
-gnome-system-monitor
-gnome-terminal
-gstreamer1-plugins-ugly-free
-gvfs-gphoto2
-gvfs-mtp
-gvfs-smb
-hexchat
-imsettings-systemd
-initial-setup-gui
-lightdm
-metacity
-nemo-fileroller
-nemo-image-converter
-nemo-preview
-nm-connection-editor
-pipewire-alsa
-pipewire-pulseaudio
-powerline
-redshift-gtk
-sane-backends-drivers-scanners
-setroubleshoot
-slick-greeter
-slick-greeter-cinnamon
-tmux
-tmux-powerline
-transmission
-vim-enhanced
-vim-powerline
-xdg-user-dirs-gtk
-xed
-xreader
-wireplumber
-
-parole
-#audacious
-#rhythmbox
-
-libreoffice-calc
-libreoffice-emailmerge
-libreoffice-graphicfilter
-libreoffice-impress
-libreoffice-writer
-
--xsane
--xane-gimp
--mpage
--hplip
--isdn4k-utils
-%end

live/9/x86_64/prod/rocky-live-cinnamon.ks

@@ -1,64 +0,0 @@
-# rocky-live-cinnamon.ks
-
-%include rocky-live-base-spin.ks
-%include rocky-live-cinnamon-common.ks
-
-part / --size 8192
-
-%post
-# cinnamon configuration
-
-cat > /etc/sysconfig/desktop <<EOF
-PREFERRED=/usr/bin/cinnamon-session
-DISPLAYMANAGER=/usr/sbin/lightdm
-EOF
-
-cat >> /etc/rc.d/init.d/livesys << EOF
-# make the installer show up
-if [ -f /usr/share/applications/liveinst.desktop  ]; then
-  # Show harddisk install in shell dash
-  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
-fi
-mkdir /home/liveuser/Desktop
-cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
-chmod +x /home/liveuser/Desktop/liveinst.desktop
-
-# move to anaconda
-mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
-
-if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop  ]; then
-  mkdir -p ~liveuser/.config/autostart
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
-fi
-
-# set up lightdm autologin
-sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
-sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
-sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
-
-# set cinnamon as default session, otherwise login will fail
-sed -i 's/^#user-session=.*/user-session=cinnamon/' /etc/lightdm/lightdm.conf
-
-# Turn off PackageKit-command-not-found while uninstalled
-if [ -f /etc/PackageKit/CommandNotFound.conf  ]; then
-  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
-fi
-
-# The updater applet might or might not exist
-rm -f /etc/xdg/autostart/org.mageia.dnfdragora-updater.desktop
-
-# reset selinux contexts
-chown -R liveuser:liveuser /home/liveuser/
-restorecon -R /home/liveuser/
-restorecon -R /
-
-EOF
-
-# this doesn't come up automatically. not sure why.
-systemctl enable --force lightdm.service
-
-# CRB needs to be enabled for EPEL to function.
-dnf config-manager --set-enabled crb
-
-%end

live/9/x86_64/prod/rocky-live-kde.ks

@@ -1,4 +1,5 @@
 # rocky-live-kde.ks
+# BROKEN
 
 %include rocky-live-kde-base.ks
 

live/9/x86_64/prod/rocky-live-mate-common.ks

@@ -5,8 +5,6 @@ thunderbird
 firefox
 f36-backgrounds-mate
 f36-backgrounds-extras-mate
-f37-backgrounds-mate
-f37-backgrounds-extras-mate
 
 NetworkManager-adsl
 NetworkManager-bluetooth

live/9/x86_64/prod/rocky-live-xfce-common.ks

@@ -1,7 +1,7 @@
 # xfce
 %packages
 
-# these aren't an epel thing for some reason.
+# these aren't an epel 8 thing for some reason.
 @xfce-desktop --nodefaults
 #@^xfce-desktop-environment
 #@xfce-apps
@@ -34,10 +34,6 @@ gparted
 # extras
 f35-backgrounds-xfce
 f35-backgrounds-extras-xfce
-f36-backgrounds-xfce
-f36-backgrounds-extras-xfce
-f37-backgrounds-xfce
-f37-backgrounds-extras-xfce
 
 xfce4-about
 xfce4-taskmanager

live/9/x86_64/stage/rocky-live-cinnamon-common.ks

@@ -1,77 +0,0 @@
-# cinnamon
-%packages
-rocky-backgrounds
-thunderbird
-firefox
-f36-backgrounds-gnome
-f36-backgrounds-extras-gnome
-f37-backgrounds-gnome
-f37-backgrounds-extras-gnome
-
-NetworkManager-adsl
-NetworkManager-bluetooth
-NetworkManager-l2tp-gnome
-NetworkManager-libreswan-gnome
-NetworkManager-openconnect-gnome
-NetworkManager-openvpn-gnome
-NetworkManager-ppp
-NetworkManager-pptp-gnome
-NetworkManager-wifi
-NetworkManager-wwan
-cinnamon
-cinnamon-control-center
-cinnamon-screensaver
-eom
-firewall-config
-gnome-calculator
-gnome-disk-utility
-gnome-screenshot
-gnome-system-monitor
-gnome-terminal
-gstreamer1-plugins-ugly-free
-gvfs-gphoto2
-gvfs-mtp
-gvfs-smb
-hexchat
-imsettings-systemd
-initial-setup-gui
-lightdm
-metacity
-nemo-fileroller
-nemo-image-converter
-nemo-preview
-nm-connection-editor
-pipewire-alsa
-pipewire-pulseaudio
-powerline
-redshift-gtk
-sane-backends-drivers-scanners
-setroubleshoot
-slick-greeter
-slick-greeter-cinnamon
-tmux
-tmux-powerline
-transmission
-vim-enhanced
-vim-powerline
-xdg-user-dirs-gtk
-xed
-xreader
-wireplumber
-
-parole
-#audacious
-#rhythmbox
-
-libreoffice-calc
-libreoffice-emailmerge
-libreoffice-graphicfilter
-libreoffice-impress
-libreoffice-writer
-
--xsane
--xane-gimp
--mpage
--hplip
--isdn4k-utils
-%end

live/9/x86_64/stage/rocky-live-cinnamon.ks

@@ -1,64 +0,0 @@
-# rocky-live-cinnamon.ks
-
-%include rocky-live-base-spin.ks
-%include rocky-live-cinnamon-common.ks
-
-part / --size 8192
-
-%post
-# cinnamon configuration
-
-cat > /etc/sysconfig/desktop <<EOF
-PREFERRED=/usr/bin/cinnamon-session
-DISPLAYMANAGER=/usr/sbin/lightdm
-EOF
-
-cat >> /etc/rc.d/init.d/livesys << EOF
-# make the installer show up
-if [ -f /usr/share/applications/liveinst.desktop  ]; then
-  # Show harddisk install in shell dash
-  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
-fi
-mkdir /home/liveuser/Desktop
-cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
-chmod +x /home/liveuser/Desktop/liveinst.desktop
-
-# move to anaconda
-mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
-
-if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop  ]; then
-  mkdir -p ~liveuser/.config/autostart
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
-fi
-
-# set up lightdm autologin
-sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
-sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
-sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
-
-# set cinnamon as default session, otherwise login will fail
-sed -i 's/^#user-session=.*/user-session=cinnamon/' /etc/lightdm/lightdm.conf
-
-# Turn off PackageKit-command-not-found while uninstalled
-if [ -f /etc/PackageKit/CommandNotFound.conf  ]; then
-  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
-fi
-
-# The updater applet might or might not exist
-rm -f /etc/xdg/autostart/org.mageia.dnfdragora-updater.desktop
-
-# reset selinux contexts
-chown -R liveuser:liveuser /home/liveuser/
-restorecon -R /home/liveuser/
-restorecon -R /
-
-EOF
-
-# this doesn't come up automatically. not sure why.
-systemctl enable --force lightdm.service
-
-# CRB needs to be enabled for EPEL to function.
-dnf config-manager --set-enabled crb
-
-%end

live/9/x86_64/stage/rocky-live-kde.ks

@@ -1,9 +1,10 @@
 # rocky-live-kde.ks
+# BROKEN
 
 %include rocky-live-kde-base.ks
 
 # DVD
-part / --size=7300
+part / --size=7000
 
 %post
 %end

live/9/x86_64/stage/rocky-live-mate-common.ks

@@ -5,8 +5,6 @@ thunderbird
 firefox
 f36-backgrounds-mate
 f36-backgrounds-extras-mate
-f37-backgrounds-mate
-f37-backgrounds-extras-mate
 
 NetworkManager-adsl
 NetworkManager-bluetooth

live/9/x86_64/stage/rocky-live-xfce-common.ks

@@ -1,7 +1,7 @@
 # xfce
 %packages
 
-# these aren't an epel thing for some reason.
+# these aren't an epel 8 thing for some reason.
 @xfce-desktop --nodefaults
 #@^xfce-desktop-environment
 #@xfce-apps
@@ -34,10 +34,6 @@ gparted
 # extras
 f35-backgrounds-xfce
 f35-backgrounds-extras-xfce
-f36-backgrounds-xfce
-f36-backgrounds-extras-xfce
-f37-backgrounds-xfce
-f37-backgrounds-extras-xfce
 
 xfce4-about
 xfce4-taskmanager