Rocky-9-Azure-Base.ks

@@ -27,16 +27,16 @@ selinux --enforcing
 services --disabled="kdump,rhsmcertd" --enabled="NetworkManager,sshd,rsyslog,chronyd,cloud-init,cloud-init-local,cloud-config,cloud-final,rngd"
 # System bootloader configuration
 bootloader --append="rootdelay=300 console=ttyS0 earlyprintk=ttyS0  no_timer_check crashkernel=auto net.ifnames=0" --location=mbr --timeout=1
-
+# Clear the Master Boot Record
+#zerombr
+# Partition clearing information
+#clearpart --all --initlabel --disklabel=gpt
 # Disk partitioning information
-# NOTE(neil): 2023-05-12 NONE of reqpart, clearpart, zerombr can be used. We
+part /boot/efi --size=100  --fstype=efi      --asprimary
-# are creating partitions manually in %pre to ensure proper ordering as
+part /boot     --size=1000 --fstype=xfs      --label=boot
-# Anaconda does NOT ensure the ordering `part` commands.
+part prepboot  --size=4    --fstype=prepboot --asprimary
-part /boot/efi --fstype="efi" --onpart=vda1
+part biosboot  --size=1    --fstype=biosboot --asprimary
-part /boot --fstype="xfs" --label=boot --onpart=vda2
+part /         --size=8000 --fstype="xfs"    --mkfsoptions "-m bigtime=0,inobtcount=0"
-part prepboot --fstype="prepboot" --onpart=vda3
-part biosboot --fstype="biosboot" --onpart=vda4
-part /         --size=8000 --fstype="xfs"    --mkfsoptions "-m bigtime=0,inobtcount=0" --grow --onpart=vda5
 
 %pre
 # Clear the Master Boot Record

Rocky-9-Azure-LVM.ks

@@ -28,9 +28,9 @@ services --disabled="kdump,rhsmcertd" --enabled="NetworkManager,sshd,rsyslog,chr
 # System bootloader configuration
 bootloader --append="rootdelay=300 console=ttyS0 earlyprintk=ttyS0  no_timer_check crashkernel=auto net.ifnames=0" --location=mbr --timeout=1
 # Clear the Master Boot Record
-#zerombr
+zerombr
 # Partition clearing information
-#clearpart --all --initlabel --disklabel=gpt
+clearpart --all --initlabel --disklabel=gpt
 # Disk partitioning information
 part /boot/efi --fstype="efi" --onpart=vda1
 part /boot --fstype="xfs" --label=boot --onpart=vda2

Rocky-9-Container-UBI.ks

@@ -15,7 +15,7 @@ shutdown
 
 keyboard us
 lang en_US.UTF-8
-timezone --utc --nontp Etc/UTC
+timezone --utc --nontp UTC
 
 # Disk setup
 zerombr
@@ -27,22 +27,23 @@ autopart --noboot --nohome --noswap --nolvm --fstype=ext4
 %end
 
 # Package setup
+# NOTE(nhanlon) - 2022-11-23 adding --ignoremissing as dmidecode does not exist on all arches
 %packages --ignoremissing --excludedocs --inst-langs=en --nocore --exclude-weakdeps
 bash
+binutils
+brotli
 coreutils-single
 crypto-policies-scripts
-curl-minimal
+dmidecode
 findutils
-gdb-gdbserver
 glibc-minimal-langpack
-gzip
+libcurl
-libcurl-minimal
 systemd
 rocky-release
 rootfiles
 tar
-util-linux
 vim-minimal
+util-linux
 which
 yum
 
@@ -67,7 +68,6 @@ yum
 %end
 
 %post --erroronfail --log=/root/anaconda-post.log
-set -eux
 # container customizations inside the chroot
 
 # Stay compatible
@@ -97,15 +97,10 @@ systemctl mask \
     systemd-logind.service \
     systemd-remount-fs.service
 
-# Remove network configuration files leftover from anaconda installation
-# https://bugzilla.redhat.com/show_bug.cgi?id=1713089
-rm -f /etc/sysconfig/network-scripts/ifcfg-*
-
 # Cleanup the image
 rm -f /etc/udev/hwdb.bin
 rm -rf /usr/lib/udev/hwdb.d/ \
        /boot /var/lib/dnf/history.* \
-       /var/cache/* /var/log/* \
        "/tmp/*" "/tmp/.*" || true
 
 

Rocky-9-EC2-Base.ks

@@ -14,16 +14,15 @@ network  --bootproto=dhcp --device=link --activate --onboot=on
 services --disabled="kdump,rhsmcertd" --enabled="NetworkManager,sshd,rsyslog,chronyd,cloud-init,cloud-init-local,cloud-config,cloud-final,rngd"
 rootpw --iscrypted thereisnopasswordanditslocked
 
-# Disk partitioning information
+# Partition Stuff
-# NOTE(neil): 2023-05-12 NONE of reqpart, clearpart, zerombr can be used. We
+#zerombr
-# are creating partitions manually in %pre to ensure proper ordering as
+#clearpart --all --initlabel --disklabel=gpt
-# Anaconda does NOT ensure the ordering `part` commands.
+#reqpart
-part /boot/efi --fstype="efi" --onpart=vda1
+part /boot/efi --size=100  --fstype=efi      --asprimary
-part /boot --fstype="xfs" --label=boot --onpart=vda2
+part /boot     --size=1000 --fstype=xfs      --label=boot
-part prepboot --fstype="prepboot" --onpart=vda3
+part prepboot  --size=4    --fstype=prepboot --asprimary
-part biosboot --fstype="biosboot" --onpart=vda4
+part biosboot  --size=1    --fstype=biosboot --asprimary
-part /         --size=8000 --fstype="xfs"    --mkfsoptions "-m bigtime=0,inobtcount=0" --grow --onpart=vda5
+part /         --size=8000 --fstype="xfs"    --mkfsoptions "-m bigtime=0,inobtcount=0"
-
 shutdown
 
 %pre

Rocky-9-GenericArm-Minimal.ks

@@ -1,188 +0,0 @@
-# Generated by pykickstart v3.41
-#version=DEVEL
-# Firewall configuration
-firewall --enabled --port=22:tcp
-# Keyboard layouts
-# old format: keyboard us
-# new format:
-keyboard --vckeymap=us --xlayouts='us'
-# System language
-lang en_US.UTF-8
-# Network information
-network  --bootproto=dhcp --device=link --activate
-# Shutdown after installation
-shutdown
-repo --name="rocky9-baseos" --baseurl=https://download.rockylinux.org/stg/rocky/9/BaseOS/aarch64/os/
-repo --name="rocky9-appstream" --baseurl=https://download.rockylinux.org/stg/rocky/9/AppStream/aarch64/os/
-repo --name="rocky9-powertools" --baseurl=https://download.rockylinux.org/stg/rocky/9/CRB/aarch64/os/
-repo --name="instKern" --baseurl=https://rockyrepos.gnulab.org/gen_aarch64_el9/ --cost=100 --install
-#Root password
-rootpw --lock
-# SELinux configuration
-selinux --enforcing
-# System services
-services --enabled="sshd,NetworkManager,chronyd"
-# System timezone
-timezone UTC --utc --nontp
-# Use network installation
-url --url="https://download.rockylinux.org/stg/rocky/9/BaseOS/aarch64/os/"
-# System bootloader configuration
-bootloader --location=mbr --driveorder="sda"
-# Partition clearing information
-clearpart --all --initlabel
-# Disk partitioning information
-part /boot/efi --asprimary --fstype="efi" --size=512
-part /boot --asprimary --fstype="ext4" --size=1024 --label=boot
-part swap --asprimary --fstype="swap" --size=512 --label=swap
-part / --asprimary --fstype="ext4" --size=3072 --label=rootfs
-
-%pre
-
-#End of Pre script for partitions
-%end
-
-%post
-# Mandatory README file
-cat >/root/README << EOF
-== Rocky Linux 9 ==
-
-If you want to automatically resize your / partition, just type the following (as root user):
-rootfs-expand
-
-EOF
-
-%end
-
-%post
-# Setting correct yum variable to use raspberrypi kernel repo
-#echo "generic" > /etc/dnf/vars/kvariant
-#
-# Creating rocky user and add to wheel group
-/sbin/useradd -c "Rocky Linux default user" -G wheel -m -U rocky
-echo "rockylinux" | passwd --stdin  rocky
-# Generic efi filename for VMs
-mkdir -p /boot/efi/EFI/BOOT
-if [ -d /boot/efi/EFI/rocky/ ] && [ -f /boot/efi/EFI/rocky/grubaa64.efi ];then
-    for j in grub.cfg grubenv;do
-        mv -f /boot/grub2/${j} /boot/efi/EFI/rocky/
-        ln -s ../efi/EFI/rocky/${j} /boot/grub2/${j}
-    done
-    cp -f /boot/efi/EFI/rocky/grubaa64.efi /boot/efi/EFI/BOOT/BOOTAA64.EFI
-fi
-
-cp -f /usr/share/uboot/rpi_3/u-boot.bin /boot/efi/rpi3-u-boot.bin
-cp -f /usr/share/uboot/rpi_4/u-boot.bin /boot/efi/rpi4-u-boot.bin
-
-rpm -e dracut-config-generic
-
-#setup dtb link by running "creating 10-devicetree.install"
-if [ -x /lib/kernel/install.d/10-devicetree.install ];then
-    /lib/kernel/install.d/10-devicetree.install remove
-fi
-
-### Write /etc/sysconfig/kernel
-cat << EOF > /etc/sysconfig/kernel
-# Written by image installer
-# UPDATEDEFAULT specifies if new-kernel-pkg should make new kernels the default
-UPDATEDEFAULT=yes
-
-# DEFAULTKERNEL specifies the default kernel package type
-DEFAULTKERNEL=kernel-core
-EOF
-chmod 644 /etc/sysconfig/kernel
-
-### Write grub defaults, turn off OS probing as it is always wrong for image creation
-cat << EOF > /etc/default/grub
-GRUB_TIMEOUT=5
-GRUB_DISTRIBUTOR="$(sed 's, release .*$,,g' /etc/system-release)"
-GRUB_DEFAULT=saved
-GRUB_DISABLE_SUBMENU=true
-GRUB_TERMINAL_OUTPUT="console"
-GRUB_CMDLINE_LINUX=""
-GRUB_DISABLE_RECOVERY="true"
-GRUB_DISABLE_OS_PROBER="true"
-GRUB_ENABLE_BLSCFG="false"
-EOF
-chmod 644 /etc/default/grub
-# fixing the rpmdb
-rpm --rebuilddb
-# remove /boot/dtb for some rpi to boot
-rm -f /boot/dtb
-%end
-
-%post
-# Remove ifcfg-link on pre generated images
-rm -f /etc/sysconfig/network-scripts/ifcfg-link
-
-# Remove machine-id on pre generated images
-rm -f /etc/machine-id
-touch /etc/machine-id
-
-%end
-
-%post
-cat >/usr/local/bin/rootfs-expand << EOF
-
-#!/bin/bash
-clear
-part=\$(mount |grep '^/dev.* / ' |awk '{print \$1}')
-if [ -z "\$part" ];then
-    echo "Error detecting rootfs"
-    exit -1
-fi
-dev=\$(echo \$part|sed 's/[0-9]*\$//g')
-devlen=\${#dev}
-num=\${part:\$devlen}
-if [[ "\$dev" =~ ^/dev/mmcblk[0-9]*p\$ ]];then
-    dev=\${dev:0:-1}
-fi
-if [ ! -x /usr/bin/growpart ];then
-    echo "Please install cloud-utils-growpart (sudo yum install cloud-utils-growpart)"
-    exit -2
-fi
-if [ ! -x /usr/sbin/resize2fs ];then
-    echo "Please install e2fsprogs (sudo yum install e2fsprogs)"
-    exit -3
-fi
-echo \$part \$dev \$num
-
-echo "Extending partition \$num to max size ...."
-growpart \$dev \$num
-echo "Resizing ext4 filesystem ..."
-resize2fs \$part
-echo "Done."
-df -h |grep \$part
-EOF
-
-chmod +x /usr/local/bin/rootfs-expand
-%end
-
-%packages
-@core
-NetworkManager-wifi
-bash-completion
-bcm2711-firmware
-bcm2835-firmware
-bcm283x-firmware
-bcm283x-overlays
-chrony
-cloud-utils-growpart
-dracut-config-generic
-efibootmgr
-glibc-langpack-en
-grub2-common
-grub2-efi-aa64
-grub2-efi-aa64-modules
-grubby
-kernel
-kernel-core
-nano
-net-tools
-shim-aa64
-systemd-udev
-uboot-images-armv8
-uboot-tools
--dracut-config-rescue
--java-11-*
-
-%end

Rocky-9-GenericCloud-Base.ks

@@ -14,15 +14,17 @@ network  --bootproto=dhcp --device=link --activate --onboot=on
 services --disabled="kdump,rhsmcertd" --enabled="NetworkManager,sshd,rsyslog,chronyd,cloud-init,cloud-init-local,cloud-config,cloud-final,rngd"
 rootpw --iscrypted thereisnopasswordanditslocked
 
-# Disk partitioning information
+# Partition stuff
-# NOTE(neil): 2023-05-12 NONE of reqpart, clearpart, zerombr can be used. We
+zerombr
-# are creating partitions manually in %pre to ensure proper ordering as
+clearpart --all --initlabel --disklabel=gpt
-# Anaconda does NOT ensure the ordering `part` commands.
+#reqpart
-part /boot/efi --fstype="efi" --onpart=vda1
+# This should allow BIOS, UEFI, and PReP booting. Trying to be as universal as
-part /boot --fstype="xfs" --label=boot --onpart=vda2
+# possible. This is a similar setup to Fedora without the btrfs.
-part prepboot --fstype="prepboot" --onpart=vda3
+part /boot/efi --size=100  --fstype=efi      --asprimary
-part biosboot --fstype="biosboot" --onpart=vda4
+part /boot     --size=1000 --fstype=xfs      --label=boot
-part /         --size=8000 --fstype="xfs"    --mkfsoptions "-m bigtime=0,inobtcount=0" --grow --onpart=vda5
+part prepboot  --size=4    --fstype=prepboot --asprimary
+part biosboot  --size=1    --fstype=biosboot --asprimary
+part /         --size=8000 --fstype="xfs"    --mkfsoptions "-m bigtime=0,inobtcount=0"
 shutdown
 
 %pre

Rocky-9-OCP-Base.ks

@@ -33,9 +33,6 @@ services --disabled="kdump,rhsmcertd" --enabled="NetworkManager,sshd,rsyslog,chr
 bootloader --append="console=ttyS0,115200n8 console=tty0 no_timer_check crashkernel=auto net.ifnames=0 LANG=en_US.UTF-8 transparent_hugepage=never rd.luks=0 rd.md=0 rd.dm=0 rd.lvm.vg=rocky rd.lvm.lv=rocky/root rd.net.timeout.dhcp=10 libiscsi.debug_libiscsi_eh=1 netroot=iscsi:169.254.0.2:::1:iqn.2015-02.oracle.boot:uefi ip=dhcp rd.iscsi.bypass rd.iscsi.param=node.session.timeo.replacement_timeout=6000" --location=mbr --timeout=1 --boot-drive=vda
 
 # Disk partitioning information
-# NOTE(neil): 2023-05-12 NONE of reqpart, clearpart, zerombr can be used. We
-# are creating partitions manually in %pre to ensure proper ordering as
-# Anaconda does NOT ensure the ordering `part` commands.
 part /boot/efi --fstype="efi" --onpart=vda1
 part /boot --fstype="xfs" --label=boot --onpart=vda2
 part prepboot --fstype="prepboot" --onpart=vda3

Rocky-9-RPI-Base.ks

@@ -1,168 +0,0 @@
-# Kickstart to build Rocky 8 image for Raspberry Pi 4 hardware (aarch64)
-#
-
-# Disk setup
-clearpart --initlabel --all
-part /boot --asprimary --fstype=vfat --size=300 --label=boot
-part swap --asprimary --fstype=swap --size=512 --label=swap
-part / --asprimary --fstype=ext4 --size=2800 --label=RPIROOT
-
-# Repos setup:
-url --url http://download.rockylinux.org/stg/rocky/9/BaseOS/aarch64/os/
-repo --name="BaseOS"     --baseurl=http://download.rockylinux.org/stg/rocky/9/BaseOS/aarch64/os/ --cost=100
-repo --name="AppStream"  --baseurl=http://download.rockylinux.org/stg/rocky/9/AppStream/aarch64/os/ --cost=200 --install
-repo --name="CRB" --baseurl=http://download.rockylinux.org/stg/rocky/9/CRB/aarch64/os/ --cost=300 --install
-# Rocky Rpi kernel repo, we need a more permanent place for this:
-repo --name="rockyrpi" --baseurl=https://download.rockylinux.org/stg/sig/9/altarch/aarch64/altarch-rockyrpi/ --cost=20
-repo --name="rockyextras" --baseurl=https://download.rockylinux.org/stg/rocky/9/extras/aarch64/os/  --cost=20
-
-# Install process:
-#text
-keyboard us --xlayouts=us --vckeymap=us
-rootpw --lock
-# FIXME user creation here does not work ?
-# user --name="rocky" --password="rockylinux" --plaintext --gecos="Rocky default user" --groups=wheel --uid=1000
-timezone --isUtc --nontp UTC
-selinux --enforcing
-firewall --enabled --port=22:tcp
-network --bootproto=dhcp --device=link --activate --onboot=on
-services --enabled=sshd,NetworkManager,chronyd,cpupower
-shutdown
-bootloader --location=none
-lang en_US.UTF-8
-skipx
-
-# Package selection:
-%packages
-@core
-#-grub2-tools-minimal
-#-grub2-tools
-#-grubby
-#-grub2-common
-chrony
-cloud-utils-growpart
-net-tools
-NetworkManager-wifi
-vim
-bash-completion
-nano
-kernel-tools
-
-# Need these for setting default locale of en-US:
-langpacks-en
-glibc-all-langpacks
-
-# will enable rocky-release-rpi after full 9 release (and we have it in the -extras repo)
-rocky-release-rpi
-raspberrypi2-firmware
-raspberrypi2-kernel4
-
-%end
-
-# Post install scripts:
-%post
-
-# Write initial boot line to cmdline.txt (we will update the root partuuid further down)
-cat > /boot/cmdline.txt << EOF
-console=ttyAMA0,115200 console=tty1 root= rootfstype=ext4 elevator=deadline rootwait
-EOF
-
-# Apparently kickstart user was not working, attempt to do it here?
-/sbin/useradd -c "Rocky Linux default user" -G wheel -m -U rocky
-echo "rockylinux" | passwd --stdin  rocky
-
-# Need to write several files to help with various things here.
-# First, the all-important README :
-
-cat >/home/rocky/README << EOF
-== Rocky 9 Raspberry Pi Image ==
-
-This is a Rocky 9 install intended for Raspberry Pi 3b and 4 devices (architecture is aarch64).
-
-This image WILL NOT WORK on a Raspberry Pi 1 or 2 (1.1 or earlier), we are 64-bit only, and have no support for 32-bit ARM processors.  Sorry :-/.
-
-The newer Pi Zero devices should be supported, as well as the Raspberry Pi 2 version 1.2 boards, which are 64-bit
-
-
-IMAGE NOTES / DIFFERENCES FROM STOCK ROCKY 8:
-  
-  - Based on Rocky Linux 9, points to production Rocky 9 aarch64 repositories
-  - Includes script that fixes the wifi.  Simple edit of a txt firmware settings file.  Will need to be run whenever linux-firmware gets upgraded
-  - Includes @minimal-install , plus a few quality of life packages like vim, bash-completion, etc.
-  - Initial User "rocky" (default password: "rockylinux").  Root password disabled, rocky user is a sudoer
-  - Partitions are 300 MB /boot , 512 MB swap, 2800 MB rootfs.  Requires a 4 GB or larger storage device to serve as your disk
-
-GROW YOUR PARTITION: 
-
-If you want to automatically resize your root (/ ) partition, just type the following (as root user):
-sudo rootfs-expand
-
-It should fill your main rootfs partition to the end of the disk.
-
-Thanks for your interest on Rocky-on-Rpi, feel free to share your experience or contribute in our chat channel at:  https://chat.rockylinux.org/rocky-linux/channels/altarch  !
-
--The Rocky Linux Team
-
-EOF
-
-# Run the fix-wifi script (extracts the .xz firmware) - should be installed via the rocky-release-rpi package
-# (shouldn't be needed anymore - fixed in newer rpi kernel builds)
-#fix-wifi-rpi.sh
-
-# Cleanup before shipping an image
-
-# Remove ifcfg-link on pre generated images
-rm -f /etc/sysconfig/network-scripts/ifcfg-link
-
-# Remove machine-id on pre generated images
-rm -f /etc/machine-id
-touch /etc/machine-id
-
-# Ensure no ssh keys are present
-rm -f "/etc/ssh/*_key*"
-
-# Clean yum cache
-yum clean all
-
-# Fix weird sssd bug, where it gets its folder owned by the unbound user:
-chown -R sssd:sssd /var/lib/sss/{db,pipes,mc,pubconf,gpo_cache}
-
-# Setting tuned profile to powersave by default -> sets the CPU governor to "ondemand".  This prevents overheating issues
-cat > /etc/sysconfig/cpupower << EOF
-# See 'cpupower help' and cpupower(1) for more info
-CPUPOWER_START_OPTS="frequency-set -g ondemand"
-CPUPOWER_STOP_OPTS="frequency-set -g ondemand"
-EOF
-
-%end
-
-# Add the PARTUUID of the rootfs partition to the kernel command line
-# We must do this *outside* of the chroot, by grabbing the UUID of the loopmounted rootfs
-%post --nochroot
-
-# Extract the UUID of the rootfs partition from /etc/fstab
-UUID_ROOTFS="$(/bin/cat $INSTALL_ROOT/etc/fstab | \
-/bin/awk -F'[ =]' '/\/ / {print $2}')"
-
-# Get the PARTUUID of the rootfs partition
-PART_UUID_ROOTFS="$(/sbin/blkid  "$(/sbin/blkid --uuid $UUID_ROOTFS)" | \
-/bin/awk '{print $NF}' | /bin/tr -d '"' )"
-
-# Configure the kernel commandline
-/bin/sed -i "s/root= /root=${PART_UUID_ROOTFS} /" $INSTALL_ROOT/boot/cmdline.txt
-echo "cmdline.txt looks like this, please review:"
-/bin/cat $INSTALL_ROOT/boot/cmdline.txt
-
-# Extract UUID of swap partition:
-UUID_SWAP=$(/bin/grep 'swap'  $INSTALL_ROOT/etc/fstab  | awk '{print $1}' | awk -F '=' '{print $2}')
-
-# Fix swap partition: ensure page size is 4096 (differs on the aarch64 AWS build host)
-/usr/sbin/mkswap -L "_swap" -p 4096  -U "${UUID_SWAP}"  /dev/disk/by-uuid/${UUID_SWAP}
-
-%end
-%post
-# WiFi fix on Pi 3 Model B(image wont boot on Pi 3B w/o this fix) 
-cd /lib/firmware/brcm
-xz -d -k brcmfmac43430-sdio.raspberrypi,3-model-b.txt.xz
-%end
-

container/rocky-container-ubi.ks

@@ -2,14 +2,14 @@
 
 %packages --excludedocs --inst-langs=en --nocore --exclude-weakdeps
 bash
+binutils
+brotli
 coreutils-single
 crypto-policies-scripts
-curl-minimal
+dmidecode
 findutils
-gdb-gdbserver
 glibc-minimal-langpack
-gzip
+libcurl
-libcurl-minimal
 systemd
 rocky-release
 rootfiles
@@ -40,7 +40,6 @@ yum
 %end
 
 %post --erroronfail --log=/root/anaconda-post.log
-set -eux
 # container customizations inside the chroot
 
 # Stay compatible
@@ -70,15 +69,10 @@ systemctl mask \
     systemd-logind.service \
     systemd-remount-fs.service
 
-# Remove network configuration files leftover from anaconda installation
-# https://bugzilla.redhat.com/show_bug.cgi?id=1713089
-rm -f /etc/sysconfig/network-scripts/ifcfg-*
-
 # Cleanup the image
 rm -f /etc/udev/hwdb.bin
 rm -rf /usr/lib/udev/hwdb.d/ \
        /boot /var/lib/dnf/history.* \
-       /var/cache/* /var/log/* \
        "/tmp/*" "/tmp/.*" || true
 
 

container/rocky-container.ks

@@ -10,7 +10,7 @@ shutdown
 
 keyboard us
 lang en_US.UTF-8
-timezone --utc --nontp Etc/UTC
+timezone --utc --nontp UTC
 
 # Disk setup
 zerombr

live/9/aarch64/peridot/rocky-live-cinnamon-common.ks

@@ -32,7 +32,7 @@ gstreamer1-plugins-ugly-free
 gvfs-gphoto2
 gvfs-mtp
 gvfs-smb
-#hexchat
+hexchat
 imsettings-systemd
 initial-setup-gui
 lightdm
@@ -64,7 +64,7 @@ parole
 #rhythmbox
 
 libreoffice-calc
-#libreoffice-emailmerge
+libreoffice-emailmerge
 libreoffice-graphicfilter
 libreoffice-impress
 libreoffice-writer

live/9/aarch64/prod/rocky-live-cinnamon-common.ks

@@ -32,7 +32,7 @@ gstreamer1-plugins-ugly-free
 gvfs-gphoto2
 gvfs-mtp
 gvfs-smb
-#hexchat
+hexchat
 imsettings-systemd
 initial-setup-gui
 lightdm
@@ -64,7 +64,7 @@ parole
 #rhythmbox
 
 libreoffice-calc
-#libreoffice-emailmerge
+libreoffice-emailmerge
 libreoffice-graphicfilter
 libreoffice-impress
 libreoffice-writer

live/9/aarch64/stage/rocky-live-cinnamon-common.ks

@@ -32,7 +32,7 @@ gstreamer1-plugins-ugly-free
 gvfs-gphoto2
 gvfs-mtp
 gvfs-smb
-#hexchat
+hexchat
 imsettings-systemd
 initial-setup-gui
 lightdm
@@ -64,7 +64,7 @@ parole
 #rhythmbox
 
 libreoffice-calc
-#libreoffice-emailmerge
+libreoffice-emailmerge
 libreoffice-graphicfilter
 libreoffice-impress
 libreoffice-writer

live/9/ppc64le/peridot/rocky-live-base-spin.ks

@@ -1,374 +0,0 @@
-# rocky-live-base-spin.ks
-#
-# Base installation information for Rocky Linux images
-# Contains EPEL.
-#
-
-lang en_US.UTF-8
-keyboard us
-timezone US/Eastern
-selinux --enforcing
-firewall --enabled --service=mdns
-xconfig --startxonboot
-zerombr
-clearpart --all
-part / --size 5120 --fstype ext4
-services --enabled=NetworkManager,ModemManager --disabled=sshd
-network --bootproto=dhcp --device=link --activate
-rootpw --lock --iscrypted locked
-shutdown
-
-%include rocky-repo-epel.ks
-
-%packages
-@base-x
-@guest-desktop-agents
-@standard
-@core
-@fonts
-@input-methods
-@dial-up
-@multimedia
-@hardware-support
-
-# explicit
-kernel
-kernel-modules
-kernel-modules-extra
-anaconda
-anaconda-install-env-deps
-anaconda-live
-@anaconda-tools
-efi-filesystem
-grub2-common
-grub2-ppc64le
-grub2-ppc64le-modules
-grub2-tools
-grub2-tools-extra
-grub2-tools-minimal
-grubby
-librtas
-libservicelog
-libvpd
-lsvpd
-opal-prd
-ppc64-diag
-ppc64-diag-rtas
-powerpc-utils
-powerpc-utils-core
--shim-unsigned-*64
-
-# Required for SVG rnotes images
-aajohan-comfortaa-fonts
-
-# RHBZ#1242586 - Required for initramfs creation
-dracut-live
-
-# Anaconda needs all the locales available, just like a DVD installer
-glibc-all-langpacks
-
-# no longer in @core since 2018-10, but needed for livesys script
-initscripts
-chkconfig
-
-# absolutely required - don't want a system that can't actually update
-epel-release
-%end
-
-%post
-# FIXME: it'd be better to get this installed from a package
-cat > /etc/rc.d/init.d/livesys << EOF
-#!/bin/bash
-#
-# live: Init script for live image
-#
-# chkconfig: 345 00 99
-# description: Init script for live image.
-### BEGIN INIT INFO
-# X-Start-Before: display-manager chronyd
-### END INIT INFO
-
-. /etc/init.d/functions
-
-if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ]; then
-    exit 0
-fi
-
-if [ -e /.liveimg-configured ] ; then
-    configdone=1
-fi
-
-exists() {
-    which \$1 >/dev/null 2>&1 || return
-    \$*
-}
-
-livedir="LiveOS"
-for arg in \`cat /proc/cmdline\` ; do
-  if [ "\${arg##rd.live.dir=}" != "\${arg}" ]; then
-    livedir=\${arg##rd.live.dir=}
-    continue
-  fi
-  if [ "\${arg##live_dir=}" != "\${arg}" ]; then
-    livedir=\${arg##live_dir=}
-  fi
-done
-
-# Enable swap unless requested otherwise
-swaps=\`blkid -t TYPE=swap -o device\`
-if ! strstr "\`cat /proc/cmdline\`" noswap && [ -n "\$swaps" ] ; then
-  for s in \$swaps ; do
-    action "Enabling swap partition \$s" swapon \$s
-  done
-fi
-if ! strstr "\`cat /proc/cmdline\`" noswap && [ -f /run/initramfs/live/\${livedir}/swap.img ] ; then
-  action "Enabling swap file" swapon /run/initramfs/live/\${livedir}/swap.img
-fi
-
-# Support for persistent homes
-mountPersistentHome() {
-  # support label/uuid
-  if [ "\${homedev##LABEL=}" != "\${homedev}" -o "\${homedev##UUID=}" != "\${homedev}" ]; then
-    homedev=\`/sbin/blkid -o device -t "\$homedev"\`
-  fi
-
-  # if we're given a file rather than a blockdev, loopback it
-  if [ "\${homedev##mtd}" != "\${homedev}" ]; then
-    # mtd devs don't have a block device but get magic-mounted with -t jffs2
-    mountopts="-t jffs2"
-  elif [ ! -b "\$homedev" ]; then
-    loopdev=\`losetup -f\`
-    if [ "\${homedev##/run/initramfs/live}" != "\${homedev}" ]; then
-      action "Remounting live store r/w" mount -o remount,rw /run/initramfs/live
-    fi
-    losetup \$loopdev \$homedev
-    homedev=\$loopdev
-  fi
-
-  # if it's encrypted, we need to unlock it
-  if [ "\$(/sbin/blkid -s TYPE -o value \$homedev 2>/dev/null)" = "crypto_LUKS" ]; then
-    echo
-    echo "Setting up encrypted /home device"
-    plymouth ask-for-password --command="cryptsetup luksOpen \$homedev EncHome"
-    homedev=/dev/mapper/EncHome
-  fi
-
-  # and finally do the mount
-  mount \$mountopts \$homedev /home
-  # if we have /home under what's passed for persistent home, then
-  # we should make that the real /home.  useful for mtd device on olpc
-  if [ -d /home/home ]; then mount --bind /home/home /home ; fi
-  [ -x /sbin/restorecon ] && /sbin/restorecon /home
-  if [ -d /home/liveuser ]; then USERADDARGS="-M" ; fi
-}
-
-# Help locate persistent homes
-findPersistentHome() {
-  for arg in \`cat /proc/cmdline\` ; do
-    if [ "\${arg##persistenthome=}" != "\${arg}" ]; then
-      homedev=\${arg##persistenthome=}
-    fi
-  done
-}
-
-if strstr "\`cat /proc/cmdline\`" persistenthome= ; then
-  findPersistentHome
-elif [ -e /run/initramfs/live/\${livedir}/home.img ]; then
-  homedev=/run/initramfs/live/\${livedir}/home.img
-fi
-
-# Mount the persistent home if it's available
-if ! strstr "\`cat /proc/cmdline\`" nopersistenthome && [ -n "\$homedev" ] ; then
-  action "Mounting persistent /home" mountPersistentHome
-fi
-
-if [ -n "\$configdone" ]; then
-  exit 0
-fi
-
-# Create the liveuser (no password) so automatic logins and sudo works
-action "Adding live user" useradd \$USERADDARGS -c "Live System User" liveuser
-passwd -d liveuser > /dev/null
-usermod -aG wheel liveuser > /dev/null
-
-# Same for root
-passwd -d root > /dev/null
-
-# Turn off firstboot (similar to a DVD/minimal install, where it asks
-# for the user to accept the EULA before bringing up a TTY)
-systemctl --no-reload disable firstboot-text.service 2> /dev/null || :
-systemctl --no-reload disable firstboot-graphical.service 2> /dev/null || :
-systemctl stop firstboot-text.service 2> /dev/null || :
-systemctl stop firstboot-graphical.service 2> /dev/null || :
-
-# Prelinking damages the images
-sed -i 's/PRELINKING=yes/PRELINKING=no/' /etc/sysconfig/prelink &>/dev/null || :
-
-# Turn off mdmonitor by default
-systemctl --no-reload disable mdmonitor.service 2> /dev/null || :
-systemctl --no-reload disable mdmonitor-takeover.service 2> /dev/null || :
-systemctl stop mdmonitor.service 2> /dev/null || :
-systemctl stop mdmonitor-takeover.service 2> /dev/null || :
-
-# Even if there isn't gnome, this doesn't hurt.
-gsettings set org.gnome.software download-updates 'false' || :
-
-# Disable cron
-systemctl --no-reload disable crond.service 2> /dev/null || :
-systemctl --no-reload disable atd.service 2> /dev/null || :
-systemctl stop crond.service 2> /dev/null || :
-systemctl stop atd.service 2> /dev/null || :
-
-# Disable abrt
-systemctl --no-reload disable abrtd.service 2> /dev/null || :
-systemctl stop abrtd.service 2> /dev/null || :
-
-# Don't sync the system clock when running live (RHBZ #1018162)
-sed -i 's/rtcsync//' /etc/chrony.conf
-
-# Mark things as configured
-touch /.liveimg-configured
-
-# add static hostname to work around xauth bug
-# https://bugzilla.redhat.com/show_bug.cgi?id=679486
-# the hostname must be something else than 'localhost'
-# https://bugzilla.redhat.com/show_bug.cgi?id=1370222
-echo "localhost-live" > /etc/hostname
-
-EOF
-
-# HAL likes to start late.
-cat > /etc/rc.d/init.d/livesys-late << EOF
-#!/bin/bash
-#
-# live: Late init script for live image
-#
-# chkconfig: 345 99 01
-# description: Late init script for live image.
-
-. /etc/init.d/functions
-
-if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ] || [ -e /.liveimg-late-configured ] ; then
-    exit 0
-fi
-
-exists() {
-    which \$1 >/dev/null 2>&1 || return
-    \$*
-}
-
-touch /.liveimg-late-configured
-
-# Read some stuff out of the kernel cmdline
-for o in \`cat /proc/cmdline\` ; do
-    case \$o in
-    ks=*)
-        ks="--kickstart=\${o#ks=}"
-        ;;
-    xdriver=*)
-        xdriver="\${o#xdriver=}"
-        ;;
-    esac
-done
-
-# If liveinst or textinst is given, start installer
-if strstr "\`cat /proc/cmdline\`" liveinst ; then
-   plymouth --quit
-   /usr/sbin/liveinst \$ks
-fi
-if strstr "\`cat /proc/cmdline\`" textinst ; then
-   plymouth --quit
-   /usr/sbin/liveinst --text \$ks
-fi
-
-# Configure X, allowing user to override xdriver
-if [ -n "\$xdriver" ]; then
-   cat > /etc/X11/xorg.conf.d/00-xdriver.conf <<FOE
-Section "Device"
-	Identifier	"Videocard0"
-	Driver	"\$xdriver"
-EndSection
-FOE
-fi
-
-EOF
-
-chmod 755 /etc/rc.d/init.d/livesys
-/sbin/restorecon /etc/rc.d/init.d/livesys
-/sbin/chkconfig --add livesys
-
-chmod 755 /etc/rc.d/init.d/livesys-late
-/sbin/restorecon /etc/rc.d/init.d/livesys-late
-/sbin/chkconfig --add livesys-late
-
-# Enable tmpfs for /tmp - this is a good idea
-systemctl enable tmp.mount
-
-# make it so that we don't do writing to the overlay for things which
-# are just tmpdirs/caches
-# note https://bugzilla.redhat.com/show_bug.cgi?id=1135475
-cat >> /etc/fstab << EOF
-vartmp   /var/tmp    tmpfs   defaults   0  0
-EOF
-
-# PackageKit likes to play games. Let's fix that.
-rm -f /var/lib/rpm/__db*
-releasever=$(rpm -q --qf '%{version}\n' --whatprovides system-release)
-basearch=$(uname -i)
-rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
-echo "Packages within this LiveCD"
-rpm -qa
-# Note that running rpm recreates the rpm db files which aren't needed or wanted
-rm -f /var/lib/rpm/__db*
-
-# go ahead and pre-make the man -k cache (#455968)
-/usr/bin/mandb
-
-# make sure there aren't core files lying around
-rm -f /core*
-
-# remove random seed, the newly installed instance should make it's own
-rm -f /var/lib/systemd/random-seed
-
-# convince readahead not to collect
-# FIXME: for systemd
-
-echo 'File created by kickstart. See systemd-update-done.service(8).' \
-    | tee /etc/.updated >/var/.updated
-
-# Drop the rescue kernel and initramfs, we don't need them on the live media itself.
-# See bug 1317709
-rm -f /boot/*-rescue*
-
-# Disable network service here, as doing it in the services line
-# fails due to RHBZ #1369794 - the error is expected
-/sbin/chkconfig network off
-
-# Remove machine-id on generated images
-rm -f /etc/machine-id
-touch /etc/machine-id
-
-%end
-
-
-%post --nochroot
-cp $INSTALL_ROOT/usr/share/licenses/*-release/* $LIVE_ROOT/
-
-# only works on x86_64
-if [ "$(uname -i)" = "i386" -o "$(uname -i)" = "x86_64" ]; then
-    # For livecd-creator builds
-    if [ ! -d $LIVE_ROOT/LiveOS ]; then mkdir -p $LIVE_ROOT/LiveOS ; fi
-    cp /usr/bin/livecd-iso-to-disk $LIVE_ROOT/LiveOS
-
-    # For lorax/livemedia-creator builds
-    sed -i '
-    /## make boot.iso/ i\
-    # Add livecd-iso-to-disk script to .iso filesystem at /LiveOS/\
-    <% f = "usr/bin/livecd-iso-to-disk" %>\
-    %if exists(f):\
-        install ${f} ${LIVEDIR}/${f|basename}\
-    %endif\
-    ' /usr/share/lorax/templates.d/99-generic/live/x86.tmpl
-fi
-
-%end

live/9/ppc64le/peridot/rocky-live-base.ks

@@ -1,370 +0,0 @@
-# rocky-live-base.ks
-#
-# Base installation information for Rocky Linux images
-#
-
-lang en_US.UTF-8
-keyboard us
-timezone US/Eastern
-selinux --enforcing
-firewall --enabled --service=mdns
-xconfig --startxonboot
-zerombr
-clearpart --all
-part / --size 5120 --fstype ext4
-services --enabled=NetworkManager,ModemManager --disabled=sshd
-network --bootproto=dhcp --device=link --activate
-rootpw --lock --iscrypted locked
-shutdown
-
-%include rocky-repo.ks
-
-%packages
-@base-x
-@guest-desktop-agents
-@standard
-@core
-@fonts
-@input-methods
-@dial-up
-@multimedia
-@hardware-support
-
-# explicit
-kernel
-kernel-modules
-kernel-modules-extra
-anaconda
-anaconda-install-env-deps
-anaconda-live
-@anaconda-tools
-efi-filesystem
-grub2-common
-grub2-ppc64le
-grub2-ppc64le-modules
-grub2-tools
-grub2-tools-extra
-grub2-tools-minimal
-grubby
-librtas
-libservicelog
-libvpd
-lsvpd
-opal-prd
-ppc64-diag
-ppc64-diag-rtas
-powerpc-utils
-powerpc-utils-core
--shim-unsigned-*64
-
-# Required for SVG rnotes images
-aajohan-comfortaa-fonts
-
-# RHBZ#1242586 - Required for initramfs creation
-dracut-live
-
-# Anaconda needs all the locales available, just like a DVD installer
-glibc-all-langpacks
-
-# This isn't in @core anymore, but livesys still needs it
-initscripts
-chkconfig
-%end
-
-%post
-# FIXME: it'd be better to get this installed from a package
-cat > /etc/rc.d/init.d/livesys << EOF
-#!/bin/bash
-#
-# live: Init script for live image
-#
-# chkconfig: 345 00 99
-# description: Init script for live image.
-### BEGIN INIT INFO
-# X-Start-Before: display-manager chronyd
-### END INIT INFO
-
-. /etc/init.d/functions
-
-if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ]; then
-    exit 0
-fi
-
-if [ -e /.liveimg-configured ] ; then
-    configdone=1
-fi
-
-exists() {
-    which \$1 >/dev/null 2>&1 || return
-    \$*
-}
-
-livedir="LiveOS"
-for arg in \`cat /proc/cmdline\` ; do
-  if [ "\${arg##rd.live.dir=}" != "\${arg}" ]; then
-    livedir=\${arg##rd.live.dir=}
-    continue
-  fi
-  if [ "\${arg##live_dir=}" != "\${arg}" ]; then
-    livedir=\${arg##live_dir=}
-  fi
-done
-
-# Enable swap unless requested otherwise
-swaps=\`blkid -t TYPE=swap -o device\`
-if ! strstr "\`cat /proc/cmdline\`" noswap && [ -n "\$swaps" ] ; then
-  for s in \$swaps ; do
-    action "Enabling swap partition \$s" swapon \$s
-  done
-fi
-if ! strstr "\`cat /proc/cmdline\`" noswap && [ -f /run/initramfs/live/\${livedir}/swap.img ] ; then
-  action "Enabling swap file" swapon /run/initramfs/live/\${livedir}/swap.img
-fi
-
-# Support for persistent homes
-mountPersistentHome() {
-  # support label/uuid
-  if [ "\${homedev##LABEL=}" != "\${homedev}" -o "\${homedev##UUID=}" != "\${homedev}" ]; then
-    homedev=\`/sbin/blkid -o device -t "\$homedev"\`
-  fi
-
-  # if we're given a file rather than a blockdev, loopback it
-  if [ "\${homedev##mtd}" != "\${homedev}" ]; then
-    # mtd devs don't have a block device but get magic-mounted with -t jffs2
-    mountopts="-t jffs2"
-  elif [ ! -b "\$homedev" ]; then
-    loopdev=\`losetup -f\`
-    if [ "\${homedev##/run/initramfs/live}" != "\${homedev}" ]; then
-      action "Remounting live store r/w" mount -o remount,rw /run/initramfs/live
-    fi
-    losetup \$loopdev \$homedev
-    homedev=\$loopdev
-  fi
-
-  # if it's encrypted, we need to unlock it
-  if [ "\$(/sbin/blkid -s TYPE -o value \$homedev 2>/dev/null)" = "crypto_LUKS" ]; then
-    echo
-    echo "Setting up encrypted /home device"
-    plymouth ask-for-password --command="cryptsetup luksOpen \$homedev EncHome"
-    homedev=/dev/mapper/EncHome
-  fi
-
-  # and finally do the mount
-  mount \$mountopts \$homedev /home
-  # if we have /home under what's passed for persistent home, then
-  # we should make that the real /home.  useful for mtd device on olpc
-  if [ -d /home/home ]; then mount --bind /home/home /home ; fi
-  [ -x /sbin/restorecon ] && /sbin/restorecon /home
-  if [ -d /home/liveuser ]; then USERADDARGS="-M" ; fi
-}
-
-# Help locate persistent homes
-findPersistentHome() {
-  for arg in \`cat /proc/cmdline\` ; do
-    if [ "\${arg##persistenthome=}" != "\${arg}" ]; then
-      homedev=\${arg##persistenthome=}
-    fi
-  done
-}
-
-if strstr "\`cat /proc/cmdline\`" persistenthome= ; then
-  findPersistentHome
-elif [ -e /run/initramfs/live/\${livedir}/home.img ]; then
-  homedev=/run/initramfs/live/\${livedir}/home.img
-fi
-
-# Mount the persistent home if it's available
-if ! strstr "\`cat /proc/cmdline\`" nopersistenthome && [ -n "\$homedev" ] ; then
-  action "Mounting persistent /home" mountPersistentHome
-fi
-
-if [ -n "\$configdone" ]; then
-  exit 0
-fi
-
-# Create the liveuser (no password) so automatic logins and sudo works
-action "Adding live user" useradd \$USERADDARGS -c "Live System User" liveuser
-passwd -d liveuser > /dev/null
-usermod -aG wheel liveuser > /dev/null
-
-# Same for root
-passwd -d root > /dev/null
-
-# Turn off firstboot (similar to a DVD/minimal install, where it asks
-# for the user to accept the EULA before bringing up a TTY)
-systemctl --no-reload disable firstboot-text.service 2> /dev/null || :
-systemctl --no-reload disable firstboot-graphical.service 2> /dev/null || :
-systemctl stop firstboot-text.service 2> /dev/null || :
-systemctl stop firstboot-graphical.service 2> /dev/null || :
-
-# Prelinking damages the images
-sed -i 's/PRELINKING=yes/PRELINKING=no/' /etc/sysconfig/prelink &>/dev/null || :
-
-# Turn off mdmonitor by default
-systemctl --no-reload disable mdmonitor.service 2> /dev/null || :
-systemctl --no-reload disable mdmonitor-takeover.service 2> /dev/null || :
-systemctl stop mdmonitor.service 2> /dev/null || :
-systemctl stop mdmonitor-takeover.service 2> /dev/null || :
-
-# Even if there isn't gnome, this doesn't hurt.
-gsettings set org.gnome.software download-updates 'false' || :
-
-# Disable cron
-systemctl --no-reload disable crond.service 2> /dev/null || :
-systemctl --no-reload disable atd.service 2> /dev/null || :
-systemctl stop crond.service 2> /dev/null || :
-systemctl stop atd.service 2> /dev/null || :
-
-# Disable abrt
-systemctl --no-reload disable abrtd.service 2> /dev/null || :
-systemctl stop abrtd.service 2> /dev/null || :
-
-# Don't sync the system clock when running live (RHBZ #1018162)
-sed -i 's/rtcsync//' /etc/chrony.conf
-
-# Mark things as configured
-touch /.liveimg-configured
-
-# add static hostname to work around xauth bug
-# https://bugzilla.redhat.com/show_bug.cgi?id=679486
-# the hostname must be something else than 'localhost'
-# https://bugzilla.redhat.com/show_bug.cgi?id=1370222
-echo "localhost-live" > /etc/hostname
-
-EOF
-
-# HAL likes to start late.
-cat > /etc/rc.d/init.d/livesys-late << EOF
-#!/bin/bash
-#
-# live: Late init script for live image
-#
-# chkconfig: 345 99 01
-# description: Late init script for live image.
-
-. /etc/init.d/functions
-
-if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ] || [ -e /.liveimg-late-configured ] ; then
-    exit 0
-fi
-
-exists() {
-    which \$1 >/dev/null 2>&1 || return
-    \$*
-}
-
-touch /.liveimg-late-configured
-
-# Read some stuff out of the kernel cmdline
-for o in \`cat /proc/cmdline\` ; do
-    case \$o in
-    ks=*)
-        ks="--kickstart=\${o#ks=}"
-        ;;
-    xdriver=*)
-        xdriver="\${o#xdriver=}"
-        ;;
-    esac
-done
-
-# If liveinst or textinst is given, start installer
-if strstr "\`cat /proc/cmdline\`" liveinst ; then
-   plymouth --quit
-   /usr/sbin/liveinst \$ks
-fi
-if strstr "\`cat /proc/cmdline\`" textinst ; then
-   plymouth --quit
-   /usr/sbin/liveinst --text \$ks
-fi
-
-# Configure X, allowing user to override xdriver
-if [ -n "\$xdriver" ]; then
-   cat > /etc/X11/xorg.conf.d/00-xdriver.conf <<FOE
-Section "Device"
-	Identifier	"Videocard0"
-	Driver	"\$xdriver"
-EndSection
-FOE
-fi
-
-EOF
-
-chmod 755 /etc/rc.d/init.d/livesys
-/sbin/restorecon /etc/rc.d/init.d/livesys
-/sbin/chkconfig --add livesys
-
-chmod 755 /etc/rc.d/init.d/livesys-late
-/sbin/restorecon /etc/rc.d/init.d/livesys-late
-/sbin/chkconfig --add livesys-late
-
-# Enable tmpfs for /tmp - this is a good idea
-systemctl enable tmp.mount
-
-# make it so that we don't do writing to the overlay for things which
-# are just tmpdirs/caches
-# note https://bugzilla.redhat.com/show_bug.cgi?id=1135475
-cat >> /etc/fstab << EOF
-vartmp   /var/tmp    tmpfs   defaults   0  0
-EOF
-
-# PackageKit likes to play games. Let's fix that.
-rm -f /var/lib/rpm/__db*
-releasever=$(rpm -q --qf '%{version}\n' --whatprovides system-release)
-basearch=$(uname -i)
-rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
-echo "Packages within this LiveCD"
-rpm -qa
-# Note that running rpm recreates the rpm db files which aren't needed or wanted
-rm -f /var/lib/rpm/__db*
-
-# go ahead and pre-make the man -k cache (#455968)
-/usr/bin/mandb
-
-# make sure there aren't core files lying around
-rm -f /core*
-
-# remove random seed, the newly installed instance should make it's own
-rm -f /var/lib/systemd/random-seed
-
-# convince readahead not to collect
-# FIXME: for systemd
-
-echo 'File created by kickstart. See systemd-update-done.service(8).' \
-    | tee /etc/.updated >/var/.updated
-
-# Drop the rescue kernel and initramfs, we don't need them on the live media itself.
-# See bug 1317709
-rm -f /boot/*-rescue*
-
-# Disable network service here, as doing it in the services line
-# fails due to RHBZ #1369794 - the error is expected
-/sbin/chkconfig network off
-
-# Remove machine-id on generated images
-rm -f /etc/machine-id
-touch /etc/machine-id
-
-%end
-
-
-%post --nochroot
-cp $INSTALL_ROOT/usr/share/licenses/*-release/* $LIVE_ROOT/
-
-# This only works on x86_64
-if [ "$(uname -i)" = "i386" -o "$(uname -i)" = "x86_64" ]; then
-    # For livecd-creator builds
-    if [ ! -d $LIVE_ROOT/LiveOS ]; then mkdir -p $LIVE_ROOT/LiveOS ; fi
-    cp /usr/bin/livecd-iso-to-disk $LIVE_ROOT/LiveOS
-
-    # For lorax/livemedia-creator builds
-    sed -i '
-    /## make boot.iso/ i\
-    # Add livecd-iso-to-disk script to .iso filesystem at /LiveOS/\
-    <% f = "usr/bin/livecd-iso-to-disk" %>\
-    %if exists(f):\
-        install ${f} ${LIVEDIR}/${f|basename}\
-    %endif\
-    ' /usr/share/lorax/templates.d/99-generic/live/x86.tmpl
-fi
-
-%end

live/9/ppc64le/peridot/rocky-live-cinnamon-common.ks

@@ -1,77 +0,0 @@
-# cinnamon
-%packages
-rocky-backgrounds
-thunderbird
-firefox
-f36-backgrounds-gnome
-f36-backgrounds-extras-gnome
-f37-backgrounds-gnome
-f37-backgrounds-extras-gnome
-
-NetworkManager-adsl
-NetworkManager-bluetooth
-NetworkManager-l2tp-gnome
-NetworkManager-libreswan-gnome
-NetworkManager-openconnect-gnome
-NetworkManager-openvpn-gnome
-NetworkManager-ppp
-NetworkManager-pptp-gnome
-NetworkManager-wifi
-NetworkManager-wwan
-cinnamon
-cinnamon-control-center
-cinnamon-screensaver
-eom
-firewall-config
-gnome-calculator
-gnome-disk-utility
-gnome-screenshot
-gnome-system-monitor
-gnome-terminal
-gstreamer1-plugins-ugly-free
-gvfs-gphoto2
-gvfs-mtp
-gvfs-smb
-hexchat
-imsettings-systemd
-initial-setup-gui
-lightdm
-metacity
-nemo-fileroller
-nemo-image-converter
-nemo-preview
-nm-connection-editor
-pipewire-alsa
-pipewire-pulseaudio
-powerline
-redshift-gtk
-sane-backends-drivers-scanners
-setroubleshoot
-slick-greeter
-slick-greeter-cinnamon
-tmux
-tmux-powerline
-transmission
-vim-enhanced
-vim-powerline
-xdg-user-dirs-gtk
-xed
-xreader
-wireplumber
-
-parole
-#audacious
-#rhythmbox
-
-libreoffice-calc
-libreoffice-emailmerge
-libreoffice-graphicfilter
-libreoffice-impress
-libreoffice-writer
-
--xsane
--xane-gimp
--mpage
--hplip
--isdn4k-utils
-%end

live/9/ppc64le/peridot/rocky-live-cinnamon.ks

@@ -1,64 +0,0 @@
-# rocky-live-cinnamon.ks
-
-%include rocky-live-base-spin.ks
-%include rocky-live-cinnamon-common.ks
-
-part / --size 8192
-
-%post
-# cinnamon configuration
-
-cat > /etc/sysconfig/desktop <<EOF
-PREFERRED=/usr/bin/cinnamon-session
-DISPLAYMANAGER=/usr/sbin/lightdm
-EOF
-
-cat >> /etc/rc.d/init.d/livesys << EOF
-# make the installer show up
-if [ -f /usr/share/applications/liveinst.desktop  ]; then
-  # Show harddisk install in shell dash
-  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
-fi
-mkdir /home/liveuser/Desktop
-cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
-chmod +x /home/liveuser/Desktop/liveinst.desktop
-
-# move to anaconda
-mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
-
-if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop  ]; then
-  mkdir -p ~liveuser/.config/autostart
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
-fi
-
-# set up lightdm autologin
-sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
-sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
-sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
-
-# set cinnamon as default session, otherwise login will fail
-sed -i 's/^#user-session=.*/user-session=cinnamon/' /etc/lightdm/lightdm.conf
-
-# Turn off PackageKit-command-not-found while uninstalled
-if [ -f /etc/PackageKit/CommandNotFound.conf  ]; then
-  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
-fi
-
-# The updater applet might or might not exist
-rm -f /etc/xdg/autostart/org.mageia.dnfdragora-updater.desktop
-
-# reset selinux contexts
-chown -R liveuser:liveuser /home/liveuser/
-restorecon -R /home/liveuser/
-restorecon -R /
-
-EOF
-
-# this doesn't come up automatically. not sure why.
-systemctl enable --force lightdm.service
-
-# CRB needs to be enabled for EPEL to function.
-dnf config-manager --set-enabled crb
-
-%end

live/9/ppc64le/peridot/rocky-live-kde-base.ks

@@ -1,110 +0,0 @@
-# Maintained by RelEng
-
-%include rocky-live-base-spin.ks
-%include rocky-live-kde-common.ks
-
-%post
-
-# set default GTK+ theme for root (see #683855, #689070, #808062)
-cat > /root/.gtkrc-2.0 << EOF
-include "/usr/share/themes/Adwaita/gtk-2.0/gtkrc"
-include "/etc/gtk-2.0/gtkrc"
-gtk-theme-name="Adwaita"
-EOF
-mkdir -p /root/.config/gtk-3.0
-cat > /root/.config/gtk-3.0/settings.ini << EOF
-[Settings]
-gtk-theme-name = Adwaita
-EOF
-
-# add initscript
-cat >> /etc/rc.d/init.d/livesys << EOF
-
-# are we *not* able to use wayland sessions?
-if strstr "\`cat /proc/cmdline\`" nomodeset ; then
-PLASMA_SESSION_FILE="plasmax11.desktop"
-else
-PLASMA_SESSION_FILE="plasma.desktop"
-fi
-
-# set up autologin for user liveuser
-if [ -f /etc/sddm.conf ]; then
-sed -i 's/^#User=.*/User=liveuser/' /etc/sddm.conf
-sed -i "s/^#Session=.*/Session=\${PLASMA_SESSION_FILE}/" /etc/sddm.conf
-else
-cat > /etc/sddm.conf << SDDM_EOF
-[Autologin]
-User=liveuser
-Session=\${PLASMA_SESSION_FILE}
-SDDM_EOF
-fi
-
-# add liveinst.desktop to favorites menu
-mkdir -p /home/liveuser/.config/
-cat > /home/liveuser/.config/kickoffrc << MENU_EOF
-[Favorites]
-FavoriteURLs=/usr/share/applications/firefox.desktop,/usr/share/applications/org.kde.dolphin.desktop,/usr/share/applications/systemsettings.desktop,/usr/share/applications/org.kde.konsole.desktop,/usr/share/applications/liveinst.desktop
-MENU_EOF
-
-# show liveinst.desktop on desktop and in menu
-sed -i 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop
-# set executable bit disable KDE security warning
-chmod +x /usr/share/applications/liveinst.desktop
-mkdir /home/liveuser/Desktop
-cp -a /usr/share/applications/liveinst.desktop /home/liveuser/Desktop/
-
-if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop   ]; then
-  mkdir -p ~liveuser/.config/autostart
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
-fi
-
-# Set akonadi backend
-mkdir -p /home/liveuser/.config/akonadi
-cat > /home/liveuser/.config/akonadi/akonadiserverrc << AKONADI_EOF
-[%General]
-Driver=QSQLITE3
-AKONADI_EOF
-
-# "Disable plasma-discover-notifier"
-mkdir -p /home/liveuser/.config/autostart
-cp -a /etc/xdg/autostart/org.kde.discover.notifier.desktop /home/liveuser/.config/autostart/
-echo 'Hidden=true' >> /home/liveuser/.config/autostart/org.kde.discover.notifier.desktop
-
-# Disable baloo
-cat > /home/liveuser/.config/baloofilerc << BALOO_EOF
-[Basic Settings]
-Indexing-Enabled=false
-BALOO_EOF
-
-# Disable kres-migrator
-cat > /home/liveuser/.kde/share/config/kres-migratorrc << KRES_EOF
-[Migration]
-Enabled=false
-KRES_EOF
-
-# Disable kwallet migrator
-cat > /home/liveuser/.config/kwalletrc << KWALLET_EOL
-[Migration]
-alreadyMigrated=true
-KWALLET_EOL
-# Disable automount of 'known' devices
-# https://bugzilla.redhat.com/show_bug.cgi?id=2073708
-cat > /home/liveuser/.config/kded_device_automounterrc << AUTOMOUNTER_EOF
-[General]
-AutomountEnabled=false
-AutomountOnLogin=false
-AutomountOnPlugin=false
-AUTOMOUNTER_EOF
-
-# make sure to set the right permissions and selinux contexts
-chown -R liveuser:liveuser /home/liveuser/
-restorecon -R /home/liveuser/
-restorecon -R /
-
-EOF
-
-systemctl enable --force sddm.service
-dnf config-manager --set-enabled crb
-
-%end

live/9/ppc64le/peridot/rocky-live-kde-common.ks

@@ -1,79 +0,0 @@
-
-%packages
-# install env-group to resolve RhBug:1891500
-@^kde-desktop-environment
-
-@firefox
-@kde-apps
-@kde-media
-
-# Libreoffice
-libreoffice-calc
-libreoffice-emailmerge
-libreoffice-graphicfilter
-libreoffice-impress
-libreoffice-writer
-
--@admin-tools
-
-### The KDE-Desktop
-
-### fixes
-sddm
-sddm-breeze
-sddm-themes
-sddm-kcm
-
-# use kde-print-manager instead of system-config-printer
--system-config-printer
-# make sure mariadb lands instead of MySQL (hopefully a temporary hack)
-mariadb-embedded
-mariadb-connector-c
-mariadb-server
-
-# minimal localization support - allows installing the kde-l10n-* packages
-#kde-l10n <- Not in EL8
-
-# unwanted packages from @kde-desktop
-# don't include these for now to fit on a cd
--desktop-backgrounds-basic
--kdeaccessibility*
--ktorrent			# kget has also basic torrent features (~3 megs)
--digikam			# digikam has duplicate functionality with gwenview (~28 megs)
--kipi-plugins			# ~8 megs + drags in Marble
--krusader			# ~4 megs
--k3b				# ~15 megs
-
-#-kdeplasma-addons		# ~16 megs
-
-# Additional packages that are not default in kde-* groups, but useful
-#kdeartwork			# only include some parts of kdeartwork
-fuse
-#mediawriter <-- Not in EL8
-
-### space issues
-
-# admin-tools
--gnome-disk-utility
-# kcm_clock still lacks some features, so keep system-config-date around
-#-system-config-date
-# prefer kcm_systemd
--system-config-services
-# prefer/use kusers
--system-config-users
-
-# we need to keep epel-release, otherwise we can't update
-epel-release
-
-### MINIMIZATION ###
--mpage
--hplip
--isdn4k-utils
--xsane
--xsane-gimp
--@input-methods
--scim*
--iok
-
-%end
-

live/9/ppc64le/peridot/rocky-live-kde-minimization.ks

@@ -1,6 +0,0 @@
-# Remove a few things we don't need
-%packages
--@input-methods
--scim*
--iok
-%end

live/9/ppc64le/peridot/rocky-live-kde.ks

@@ -1,9 +0,0 @@
-# rocky-live-kde.ks
-
-%include rocky-live-kde-base.ks
-
-# DVD
-part / --size=7300
-
-%post
-%end

live/9/ppc64le/peridot/rocky-live-mate-common.ks

@@ -1,137 +0,0 @@
-# mate
-%packages
-rocky-backgrounds
-thunderbird
-firefox
-f36-backgrounds-mate
-f36-backgrounds-extras-mate
-f37-backgrounds-mate
-f37-backgrounds-extras-mate
-
-NetworkManager-adsl
-NetworkManager-bluetooth
-NetworkManager-l2tp-gnome
-NetworkManager-libreswan-gnome
-NetworkManager-openconnect-gnome
-NetworkManager-openvpn-gnome
-NetworkManager-ovs
-NetworkManager-ppp
-NetworkManager-pptp-gnome
-NetworkManager-team
-NetworkManager-wifi
-NetworkManager-wwan
-atril
-atril-caja
-atril-thumbnailer
-caja
-caja-actions
-dconf-editor
-engrampa
-eom
-filezilla
-firewall-config
-gnome-disk-utility
-gnome-epub-thumbnailer
-gnome-logs
-gnome-themes-extra
-gparted
-gstreamer1-plugins-ugly-free
-gtk2-engines
-gucharmap
-gvfs-fuse
-gvfs-gphoto2
-gvfs-mtp
-gvfs-smb
-hexchat
-initial-setup-gui
-libmatekbd
-libmatemixer
-libmateweather
-libsecret
-lightdm
-lm_sensors
-marco
-mate-applets
-mate-backgrounds
-mate-calc
-mate-control-center
-mate-desktop
-mate-dictionary
-mate-disk-usage-analyzer
-mate-icon-theme
-mate-media
-mate-menus
-mate-menus-preferences-category-menu
-mate-notification-daemon
-mate-panel
-mate-polkit
-mate-power-manager
-mate-screensaver
-mate-screenshot
-mate-search-tool
-mate-session-manager
-mate-settings-daemon
-mate-system-log
-mate-system-monitor
-mate-terminal
-mate-themes
-mate-user-admin
-mate-user-guide
-mozo
-network-manager-applet
-nm-connection-editor
-orca
-p7zip
-p7zip-plugins
-parole
-pavucontrol
-pipewire-alsa
-pipewire-pulseaudio
-pluma
-seahorse
-seahorse-caja
-setroubleshoot
-slick-greeter-mate
-usermode-gtk
-vim-enhanced
-wireplumber
-xdg-user-dirs-gtk
-xmodmap
-xrdb
-yelp
-
-firewall-applet
-mate-menu
-mate-sensors-applet
-mate-utils
-pluma-plugins
-tigervnc
-
-libreoffice-calc
-libreoffice-emailmerge
-libreoffice-graphicfilter
-libreoffice-impress
-libreoffice-writer
-
--@3d-printing
--@admin-tools
--brasero
--fedora-icon-theme
--gnome-icon-theme
--gnome-icon-theme-symbolic
--gnome-logs
--gnome-software
--gnome-user-docs
--gnome-user-docs
--evolution-help
--telnet
--audacious
--systemd-oomd-defaults
-
--xsane
--xane-gimp
--sane-backends
--mpage
--hplip
--isdn4k-utils
-%end

live/9/ppc64le/peridot/rocky-live-mate.ks

@@ -1,63 +0,0 @@
-# rocky-live-kde.ks
-# BROKEN
-
-%include rocky-live-base-spin.ks
-%include rocky-live-mate-common.ks
-
-part / --size 7168
-
-%post
-# mate configuration
-
-cat >> /etc/rc.d/init.d/livesys << EOF
-# make the installer show up
-if [ -f /usr/share/applications/liveinst.desktop  ]; then
-  # Show harddisk install in shell dash
-  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
-fi
-mkdir /home/liveuser/Desktop
-cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
-chmod +x /home/liveuser/Desktop/liveinst.desktop
-
-# move to anaconda - probably not required for MATE.
-mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
-
-if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop  ]; then
-  mkdir -p ~liveuser/.config/autostart
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
-fi
-
-# rebuild schema cache with any overrides we installed
-glib-compile-schemas /usr/share/glib-2.0/schemas
-
-# set up lightdm autologin
-sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
-sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
-sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
-
-# set MATE as default session, otherwise login will fail
-sed -i 's/^#user-session=.*/user-session=mate/' /etc/lightdm/lightdm.conf
-
-# Turn off PackageKit-command-not-found while uninstalled
-if [ -f /etc/PackageKit/CommandNotFound.conf  ]; then
-  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
-fi
-
-# The updater applet might or might not exist
-rm -f /etc/xdg/autostart/org.mageia.dnfdragora-updater.desktop
-
-# reset selinux contexts
-chown -R liveuser:liveuser /home/liveuser/
-restorecon -R /home/liveuser/
-restorecon -R /
-
-EOF
-
-# this doesn't come up automatically. not sure why.
-systemctl enable --force lightdm.service
-
-# CRB needs to be enabled for EPEL to function.
-dnf config-manager --set-enabled crb
-
-%end

live/9/ppc64le/peridot/rocky-live-minimization.ks

@@ -1,14 +0,0 @@
-# Saving space
-%packages
-
-# save some space
--mpage
--hplip
--isdn4k-utils
-
-# scanning takes quite a bit of space :/
--xsane
--xsane-gimp
--sane-backends
-
-%end

live/9/ppc64le/peridot/rocky-live-workstation-lite.ks

@@ -1,101 +0,0 @@
-# Maintained by Release Engineering
-# mailto:releng@rockylinux.org
-
-%include rocky-live-base.ks
-%include rocky-workstation-common-lite.ks
-#
-# Disable this for now as packagekit is causing compose failures
-# by leaving a gpg-agent around holding /dev/null open.
-#
-#include snippets/packagekit-cached-metadata.ks
-
-part / --size 7750
-
-%post
-
-cat >> /etc/rc.d/init.d/livesys << EOF
-
-
-# disable gnome-software automatically downloading updates
-cat >> /usr/share/glib-2.0/schemas/org.gnome.software.gschema.override << FOE
-[org.gnome.software]
-download-updates=false
-FOE
-
-# don't autostart gnome-software session service
-rm -f /etc/xdg/autostart/gnome-software-service.desktop
-
-# disable the gnome-software shell search provider
-cat >> /usr/share/gnome-shell/search-providers/org.gnome.Software-search-provider.ini << FOE
-DefaultDisabled=true
-FOE
-
-# don't run gnome-initial-setup
-mkdir ~liveuser/.config
-touch ~liveuser/.config/gnome-initial-setup-done
-
-# suppress anaconda spokes redundant with gnome-initial-setup
-cat >> /etc/sysconfig/anaconda << FOE
-[NetworkSpoke]
-visited=1
-
-[PasswordSpoke]
-visited=1
-
-[UserSpoke]
-visited=1
-FOE
-
-# make the installer show up
-if [ -f /usr/share/applications/liveinst.desktop ]; then
-  # Show harddisk install in shell dash
-  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
-  # need to move it to anaconda.desktop to make shell happy
-  mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
-
-  cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
-[org.gnome.shell]
-favorite-apps=['firefox.desktop', 'evolution.desktop', 'org.gnome.Nautilus.desktop', 'anaconda.desktop']
-FOE
-
-  # Make the welcome screen show up
-  if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop ]; then
-    mkdir -p ~liveuser/.config/autostart
-    cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
-    cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
-  fi
-
-  # Disable GNOME welcome tour so it doesn't overlap with Fedora welcome screen
-  cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
-welcome-dialog-last-shown-version='4294967295'
-FOE
-
-  # Copy Anaconda branding in place
-  if [ -d /usr/share/lorax/product/usr/share/anaconda ]; then
-    cp -a /usr/share/lorax/product/* /
-  fi
-fi
-
-# rebuild schema cache with any overrides we installed
-glib-compile-schemas /usr/share/glib-2.0/schemas
-
-# set up auto-login
-cat > /etc/gdm/custom.conf << FOE
-[daemon]
-AutomaticLoginEnable=True
-AutomaticLogin=liveuser
-FOE
-
-# Turn off PackageKit-command-not-found while uninstalled
-if [ -f /etc/PackageKit/CommandNotFound.conf ]; then
-  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
-fi
-
-# make sure to set the right permissions and selinux contexts
-chown -R liveuser:liveuser /home/liveuser/
-restorecon -R /home/liveuser/
-restorecon -R /
-
-EOF
-
-%end

live/9/ppc64le/peridot/rocky-live-workstation.ks

@@ -1,102 +0,0 @@
-# Maintained by Release Engineering
-# mailto:releng@rockylinux.org
-
-%include rocky-live-base.ks
-%include rocky-workstation-common.ks
-#
-# Disable this for now as packagekit is causing compose failures
-# by leaving a gpg-agent around holding /dev/null open.
-#
-#include snippets/packagekit-cached-metadata.ks
-
-part / --size 7750
-
-%post
-
-cat >> /etc/rc.d/init.d/livesys << EOF
-
-
-# disable gnome-software automatically downloading updates
-cat >> /usr/share/glib-2.0/schemas/org.gnome.software.gschema.override << FOE
-[org.gnome.software]
-allow-updates=false
-download-updates=false
-FOE
-
-# don't autostart gnome-software session service
-rm -f /etc/xdg/autostart/gnome-software-service.desktop
-
-# disable the gnome-software shell search provider
-cat >> /usr/share/gnome-shell/search-providers/org.gnome.Software-search-provider.ini << FOE
-DefaultDisabled=true
-FOE
-
-# don't run gnome-initial-setup
-mkdir ~liveuser/.config
-touch ~liveuser/.config/gnome-initial-setup-done
-
-# suppress anaconda spokes redundant with gnome-initial-setup
-cat >> /etc/sysconfig/anaconda << FOE
-[NetworkSpoke]
-visited=1
-
-[PasswordSpoke]
-visited=1
-
-[UserSpoke]
-visited=1
-FOE
-
-# make the installer show up
-if [ -f /usr/share/applications/liveinst.desktop ]; then
-  # Show harddisk install in shell dash
-  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
-  # need to move it to anaconda.desktop to make shell happy
-  mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
-
-  cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
-[org.gnome.shell]
-favorite-apps=['firefox.desktop', 'evolution.desktop', 'org.gnome.Nautilus.desktop', 'anaconda.desktop']
-FOE
-
-  # Make the welcome screen show up
-  if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop ]; then
-    mkdir -p ~liveuser/.config/autostart
-    cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
-    cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
-  fi
-
-  # Disable GNOME welcome tour so it doesn't overlap with Fedora welcome screen
-  cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
-welcome-dialog-last-shown-version='4294967295'
-FOE
-
-  # Copy Anaconda branding in place
-  if [ -d /usr/share/lorax/product/usr/share/anaconda ]; then
-    cp -a /usr/share/lorax/product/* /
-  fi
-fi
-
-# rebuild schema cache with any overrides we installed
-glib-compile-schemas /usr/share/glib-2.0/schemas
-
-# set up auto-login
-cat > /etc/gdm/custom.conf << FOE
-[daemon]
-AutomaticLoginEnable=True
-AutomaticLogin=liveuser
-FOE
-
-# Turn off PackageKit-command-not-found while uninstalled
-if [ -f /etc/PackageKit/CommandNotFound.conf ]; then
-  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
-fi
-
-# make sure to set the right permissions and selinux contexts
-chown -R liveuser:liveuser /home/liveuser/
-restorecon -R /home/liveuser/
-restorecon -R /
-
-EOF
-
-%end

live/9/ppc64le/peridot/rocky-live-xfce-common.ks

@@ -1,92 +0,0 @@
-# xfce
-%packages
-
-# these aren't an epel thing for some reason.
-@xfce-desktop --nodefaults
-#@^xfce-desktop-environment
-#@xfce-apps
-#@xfce-extra-plugins
-#@xfce-media
-#@xfce-office
-
-# Manual install...
-#geany
-gparted
-#mousepad
-#ristretto
-seahorse
-#transmission
-pcp-selinux
-lightdm
-#gdm
--gdm
--gnome-shell
-
-# Some stuff might already be here, doesn't hurt to list it.
-firefox
-thunderbird
-firewall-config
-#pidgin
-rocky-backgrounds
-gparted
-#rhythmbox
-
-# extras
-f35-backgrounds-xfce
-f35-backgrounds-extras-xfce
-f36-backgrounds-xfce
-f36-backgrounds-extras-xfce
-f37-backgrounds-xfce
-f37-backgrounds-extras-xfce
-
-xfce4-about
-xfce4-taskmanager
-#xfce4-battery-plugin
-xfce4-datetime-plugin
-xfce4-netload-plugin
-#xfce4-places-plugin
-xfce4-screenshooter-plugin
-xfce4-smartbookmark-plugin
-xfce4-systemload-plugin
-xfce4-time-out-plugin
-xfce4-weather-plugin
-xfce4-whiskermenu-plugin
-#xfdashboard
-#xfdashboard-themes
-pavucontrol
-
-# XFCE group defaults
-xfce4-appfinder
-xfce4-power-manager
-#xfce4-pulseaudio-plugin
-xfce4-screensaver
-xfce4-terminal
-network-manager-applet
-openssh-askpass
-thunar-archive-plugin
-thunar-volman
-tumbler
-xfce-polkit
-
-wget
-xdg-user-dirs
-xdg-user-dirs-gtk
-
-# save some space
--autofs
--acpid
--gimp-help
--desktop-backgrounds-basic
--aspell-*
--xfce4-sensors-plugin
--xfce4-eyes-plugin
-
-### MINIMIZATION
--mpage
--hplip
--isdn4k-utils
--xsane
--xsane-gimp
--sane-backends
-
-%end

live/9/ppc64le/peridot/rocky-live-xfce.ks

@@ -1,95 +0,0 @@
-# rocky-live-kde.ks
-# BROKEN
-
-%include rocky-live-base-spin.ks
-%include rocky-live-xfce-common.ks
-
-part / --size 6144
-
-%post
-# xfce configuration
-
-# create /etc/sysconfig/desktop (needed for installation)
-
-cat > /etc/sysconfig/desktop <<EOF
-PREFERRED=/usr/bin/startxfce4
-DISPLAYMANAGER=/usr/sbin/lightdm
-EOF
-
-cat >> /etc/rc.d/init.d/livesys << EOF
-
-mkdir -p /home/liveuser/.config/xfce4
-# ugly stuff, this should give us a default background for now
-#mkdir -p /usr/share/backgrounds/images
-#ln -s /usr/share/backgrounds/f32/default/f32.png \
-#  /usr/share/backgrounds/images/default.png
-
-cat > /home/liveuser/.config/xfce4/helpers.rc << FOE
-MailReader=sylpheed-claws
-FileManager=Thunar
-WebBrowser=firefox
-FOE
-
-# disable screensaver locking (#674410)
-cat >> /home/liveuser/.xscreensaver << FOE
-mode:           off
-lock:           False
-dpmsEnabled:    False
-FOE
-
-# deactivate xfconf-migration (#683161)
-rm -f /etc/xdg/autostart/xfconf-migration-4.6.desktop || :
-
-# deactivate xfce4-panel first-run dialog (#693569)
-mkdir -p /home/liveuser/.config/xfce4/xfconf/xfce-perchannel-xml
-cp /etc/xdg/xfce4/panel/default.xml /home/liveuser/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-panel.xml
-
-# set up lightdm autologin
-sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
-sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
-sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
-
-# set Xfce as default session, otherwise login will fail
-sed -i 's/^#user-session=.*/user-session=xfce/' /etc/lightdm/lightdm.conf
-
-# debrand
-#sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/fedora-welcome.desktop
-#sed -i "s/RHEL/Rocky Linux/g" /usr/share/anaconda/gnome/fedora-welcome
-#sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/fedora-welcome
-#sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/anaconda/gnome/fedora-welcome
-#sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/applications/liveinst.desktop
-
-# Show harddisk install on the desktop
-sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop
-mkdir /home/liveuser/Desktop
-cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop/
-
-if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop  ]; then
-  mkdir -p ~liveuser/.config/autostart
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
-fi
-
-# no updater applet in live environment
-rm -f /etc/xdg/autostart/org.mageia.dnfdragora-updater.desktop
-
-# and mark it as executable (new Xfce security feature)
-chmod +x /home/liveuser/Desktop/liveinst.desktop
-
-# move to anaconda - probably not required for XFCE.
-mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
-
-# this goes at the end after all other changes. 
-chown -R liveuser:liveuser /home/liveuser
-restorecon -R /home/liveuser
-#restorecon -R /
-
-EOF
-
-# this doesn't come up automatically. not sure why.
-systemctl enable --force lightdm.service
-
-# CRB needs to be enabled for EPEL to function.
-dnf config-manager --set-enabled crb
-
-%end

live/9/ppc64le/peridot/rocky-repo-epel.ks

@@ -1,12 +0,0 @@
-# These should change based on the major/minor release
-
-# Base repos
-repo --name=BaseOS --cost=200 --baseurl=https://yumrepofs.build.resf.org/v1/projects/0048077b-1573-4cb7-8ba7-cce823857ba5/repo/hashed-BaseOS/$basearch
-repo --name=AppStream --cost=200 --baseurl=https://yumrepofs.build.resf.org/v1/projects/0048077b-1573-4cb7-8ba7-cce823857ba5/repo/hashed-AppStream/$basearch
-repo --name=CRB --cost=200 --baseurl=https://yumrepofs.build.resf.org/v1/projects/0048077b-1573-4cb7-8ba7-cce823857ba5/repo/hashed-CRB/$basearch
-repo --name=extras --cost=200 --baseurl=https://yumrepofs.build.resf.org/v1/projects/0048077b-1573-4cb7-8ba7-cce823857ba5/repo/hashed-extras/$basearch
-repo --name=epel --cost=200 --baseurl=https://dl.fedoraproject.org/pub/epel/9/Everything/$basearch/
-#repo --name=epel-modular --cost=200 --baseurl=https://dl.fedoraproject.org/pub/epel/9/Modular/$basearch/
-
-# URL to the base os repo
-url --url=https://yumrepofs.build.resf.org/v1/projects/0048077b-1573-4cb7-8ba7-cce823857ba5/repo/hashed-BaseOS/$basearch

live/9/ppc64le/peridot/rocky-repo.ks

@@ -1,10 +0,0 @@
-# These should change based on the major/minor release
-
-# Base repos
-repo --name=BaseOS --cost=200 --baseurl=https://yumrepofs.build.resf.org/v1/projects/0048077b-1573-4cb7-8ba7-cce823857ba5/repo/hashed-BaseOS/$basearch
-repo --name=AppStream --cost=200 --baseurl=https://yumrepofs.build.resf.org/v1/projects/0048077b-1573-4cb7-8ba7-cce823857ba5/repo/hashed-AppStream/$basearch
-repo --name=CRB --cost=200 --baseurl=https://yumrepofs.build.resf.org/v1/projects/0048077b-1573-4cb7-8ba7-cce823857ba5/repo/hashed-CRB/$basearch
-repo --name=extras --cost=200 --baseurl=https://yumrepofs.build.resf.org/v1/projects/0048077b-1573-4cb7-8ba7-cce823857ba5/repo/hashed-extras/$basearch
-
-# URL to the base os repo
-url --url=https://yumrepofs.build.resf.org/v1/projects/0048077b-1573-4cb7-8ba7-cce823857ba5/repo/hashed-BaseOS/$basearch

live/9/ppc64le/peridot/rocky-workstation-common-lite.ks

@@ -1,27 +0,0 @@
-%packages
-
-# Exclude unwanted groups that rocky-live-base.ks pulls in
--@dial-up
--@input-methods
--@standard
-
-# Make sure to sync any additions / removals done here with
-# workstation-product-environment in comps
-@base-x
-@core
-@fonts
-@gnome-desktop
-@guest-desktop-agents
-@hardware-support
-@internet-browser
-@networkmanager-submodules
-
-# Libreoffice
-libreoffice-calc
-libreoffice-writer
-
-# Exclude unwanted packages from @anaconda-tools group
--gfs2-utils
--reiserfs-utils
-
-%end

live/9/ppc64le/peridot/rocky-workstation-common.ks

@@ -1,32 +0,0 @@
-%packages
-
-# Exclude unwanted groups that rocky-live-base.ks pulls in
--@dial-up
--@input-methods
--@standard
-
-# Make sure to sync any additions / removals done here with
-# workstation-product-environment in comps
-@base-x
-@core
-@fonts
-@gnome-desktop
-@guest-desktop-agents
-@hardware-support
-@internet-browser
-@multimedia
-@networkmanager-submodules
-@workstation-product
-
-# Libreoffice
-libreoffice-calc
-libreoffice-emailmerge
-libreoffice-graphicfilter
-libreoffice-impress
-libreoffice-writer
-
-# Exclude unwanted packages from @anaconda-tools group
--gfs2-utils
--reiserfs-utils
-
-%end

live/9/ppc64le/prod/rocky-live-base-spin.ks

@@ -1,374 +0,0 @@
-# rocky-live-base-spin.ks
-#
-# Base installation information for Rocky Linux images
-# Contains EPEL.
-#
-
-lang en_US.UTF-8
-keyboard us
-timezone US/Eastern
-selinux --enforcing
-firewall --enabled --service=mdns
-xconfig --startxonboot
-zerombr
-clearpart --all
-part / --size 5120 --fstype ext4
-services --enabled=NetworkManager,ModemManager --disabled=sshd
-network --bootproto=dhcp --device=link --activate
-rootpw --lock --iscrypted locked
-shutdown
-
-%include rocky-repo-epel.ks
-
-%packages
-@base-x
-@guest-desktop-agents
-@standard
-@core
-@fonts
-@input-methods
-@dial-up
-@multimedia
-@hardware-support
-
-# explicit
-kernel
-kernel-modules
-kernel-modules-extra
-anaconda
-anaconda-install-env-deps
-anaconda-live
-@anaconda-tools
-efi-filesystem
-grub2-common
-grub2-ppc64le
-grub2-ppc64le-modules
-grub2-tools
-grub2-tools-extra
-grub2-tools-minimal
-grubby
-librtas
-libservicelog
-libvpd
-lsvpd
-opal-prd
-ppc64-diag
-ppc64-diag-rtas
-powerpc-utils
-powerpc-utils-core
--shim-unsigned-*64
-
-# Required for SVG rnotes images
-aajohan-comfortaa-fonts
-
-# RHBZ#1242586 - Required for initramfs creation
-dracut-live
-
-# Anaconda needs all the locales available, just like a DVD installer
-glibc-all-langpacks
-
-# no longer in @core since 2018-10, but needed for livesys script
-initscripts
-chkconfig
-
-# absolutely required - don't want a system that can't actually update
-epel-release
-%end
-
-%post
-# FIXME: it'd be better to get this installed from a package
-cat > /etc/rc.d/init.d/livesys << EOF
-#!/bin/bash
-#
-# live: Init script for live image
-#
-# chkconfig: 345 00 99
-# description: Init script for live image.
-### BEGIN INIT INFO
-# X-Start-Before: display-manager chronyd
-### END INIT INFO
-
-. /etc/init.d/functions
-
-if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ]; then
-    exit 0
-fi
-
-if [ -e /.liveimg-configured ] ; then
-    configdone=1
-fi
-
-exists() {
-    which \$1 >/dev/null 2>&1 || return
-    \$*
-}
-
-livedir="LiveOS"
-for arg in \`cat /proc/cmdline\` ; do
-  if [ "\${arg##rd.live.dir=}" != "\${arg}" ]; then
-    livedir=\${arg##rd.live.dir=}
-    continue
-  fi
-  if [ "\${arg##live_dir=}" != "\${arg}" ]; then
-    livedir=\${arg##live_dir=}
-  fi
-done
-
-# Enable swap unless requested otherwise
-swaps=\`blkid -t TYPE=swap -o device\`
-if ! strstr "\`cat /proc/cmdline\`" noswap && [ -n "\$swaps" ] ; then
-  for s in \$swaps ; do
-    action "Enabling swap partition \$s" swapon \$s
-  done
-fi
-if ! strstr "\`cat /proc/cmdline\`" noswap && [ -f /run/initramfs/live/\${livedir}/swap.img ] ; then
-  action "Enabling swap file" swapon /run/initramfs/live/\${livedir}/swap.img
-fi
-
-# Support for persistent homes
-mountPersistentHome() {
-  # support label/uuid
-  if [ "\${homedev##LABEL=}" != "\${homedev}" -o "\${homedev##UUID=}" != "\${homedev}" ]; then
-    homedev=\`/sbin/blkid -o device -t "\$homedev"\`
-  fi
-
-  # if we're given a file rather than a blockdev, loopback it
-  if [ "\${homedev##mtd}" != "\${homedev}" ]; then
-    # mtd devs don't have a block device but get magic-mounted with -t jffs2
-    mountopts="-t jffs2"
-  elif [ ! -b "\$homedev" ]; then
-    loopdev=\`losetup -f\`
-    if [ "\${homedev##/run/initramfs/live}" != "\${homedev}" ]; then
-      action "Remounting live store r/w" mount -o remount,rw /run/initramfs/live
-    fi
-    losetup \$loopdev \$homedev
-    homedev=\$loopdev
-  fi
-
-  # if it's encrypted, we need to unlock it
-  if [ "\$(/sbin/blkid -s TYPE -o value \$homedev 2>/dev/null)" = "crypto_LUKS" ]; then
-    echo
-    echo "Setting up encrypted /home device"
-    plymouth ask-for-password --command="cryptsetup luksOpen \$homedev EncHome"
-    homedev=/dev/mapper/EncHome
-  fi
-
-  # and finally do the mount
-  mount \$mountopts \$homedev /home
-  # if we have /home under what's passed for persistent home, then
-  # we should make that the real /home.  useful for mtd device on olpc
-  if [ -d /home/home ]; then mount --bind /home/home /home ; fi
-  [ -x /sbin/restorecon ] && /sbin/restorecon /home
-  if [ -d /home/liveuser ]; then USERADDARGS="-M" ; fi
-}
-
-# Help locate persistent homes
-findPersistentHome() {
-  for arg in \`cat /proc/cmdline\` ; do
-    if [ "\${arg##persistenthome=}" != "\${arg}" ]; then
-      homedev=\${arg##persistenthome=}
-    fi
-  done
-}
-
-if strstr "\`cat /proc/cmdline\`" persistenthome= ; then
-  findPersistentHome
-elif [ -e /run/initramfs/live/\${livedir}/home.img ]; then
-  homedev=/run/initramfs/live/\${livedir}/home.img
-fi
-
-# Mount the persistent home if it's available
-if ! strstr "\`cat /proc/cmdline\`" nopersistenthome && [ -n "\$homedev" ] ; then
-  action "Mounting persistent /home" mountPersistentHome
-fi
-
-if [ -n "\$configdone" ]; then
-  exit 0
-fi
-
-# Create the liveuser (no password) so automatic logins and sudo works
-action "Adding live user" useradd \$USERADDARGS -c "Live System User" liveuser
-passwd -d liveuser > /dev/null
-usermod -aG wheel liveuser > /dev/null
-
-# Same for root
-passwd -d root > /dev/null
-
-# Turn off firstboot (similar to a DVD/minimal install, where it asks
-# for the user to accept the EULA before bringing up a TTY)
-systemctl --no-reload disable firstboot-text.service 2> /dev/null || :
-systemctl --no-reload disable firstboot-graphical.service 2> /dev/null || :
-systemctl stop firstboot-text.service 2> /dev/null || :
-systemctl stop firstboot-graphical.service 2> /dev/null || :
-
-# Prelinking damages the images
-sed -i 's/PRELINKING=yes/PRELINKING=no/' /etc/sysconfig/prelink &>/dev/null || :
-
-# Turn off mdmonitor by default
-systemctl --no-reload disable mdmonitor.service 2> /dev/null || :
-systemctl --no-reload disable mdmonitor-takeover.service 2> /dev/null || :
-systemctl stop mdmonitor.service 2> /dev/null || :
-systemctl stop mdmonitor-takeover.service 2> /dev/null || :
-
-# Even if there isn't gnome, this doesn't hurt.
-gsettings set org.gnome.software download-updates 'false' || :
-
-# Disable cron
-systemctl --no-reload disable crond.service 2> /dev/null || :
-systemctl --no-reload disable atd.service 2> /dev/null || :
-systemctl stop crond.service 2> /dev/null || :
-systemctl stop atd.service 2> /dev/null || :
-
-# Disable abrt
-systemctl --no-reload disable abrtd.service 2> /dev/null || :
-systemctl stop abrtd.service 2> /dev/null || :
-
-# Don't sync the system clock when running live (RHBZ #1018162)
-sed -i 's/rtcsync//' /etc/chrony.conf
-
-# Mark things as configured
-touch /.liveimg-configured
-
-# add static hostname to work around xauth bug
-# https://bugzilla.redhat.com/show_bug.cgi?id=679486
-# the hostname must be something else than 'localhost'
-# https://bugzilla.redhat.com/show_bug.cgi?id=1370222
-echo "localhost-live" > /etc/hostname
-
-EOF
-
-# HAL likes to start late.
-cat > /etc/rc.d/init.d/livesys-late << EOF
-#!/bin/bash
-#
-# live: Late init script for live image
-#
-# chkconfig: 345 99 01
-# description: Late init script for live image.
-
-. /etc/init.d/functions
-
-if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ] || [ -e /.liveimg-late-configured ] ; then
-    exit 0
-fi
-
-exists() {
-    which \$1 >/dev/null 2>&1 || return
-    \$*
-}
-
-touch /.liveimg-late-configured
-
-# Read some stuff out of the kernel cmdline
-for o in \`cat /proc/cmdline\` ; do
-    case \$o in
-    ks=*)
-        ks="--kickstart=\${o#ks=}"
-        ;;
-    xdriver=*)
-        xdriver="\${o#xdriver=}"
-        ;;
-    esac
-done
-
-# If liveinst or textinst is given, start installer
-if strstr "\`cat /proc/cmdline\`" liveinst ; then
-   plymouth --quit
-   /usr/sbin/liveinst \$ks
-fi
-if strstr "\`cat /proc/cmdline\`" textinst ; then
-   plymouth --quit
-   /usr/sbin/liveinst --text \$ks
-fi
-
-# Configure X, allowing user to override xdriver
-if [ -n "\$xdriver" ]; then
-   cat > /etc/X11/xorg.conf.d/00-xdriver.conf <<FOE
-Section "Device"
-	Identifier	"Videocard0"
-	Driver	"\$xdriver"
-EndSection
-FOE
-fi
-
-EOF
-
-chmod 755 /etc/rc.d/init.d/livesys
-/sbin/restorecon /etc/rc.d/init.d/livesys
-/sbin/chkconfig --add livesys
-
-chmod 755 /etc/rc.d/init.d/livesys-late
-/sbin/restorecon /etc/rc.d/init.d/livesys-late
-/sbin/chkconfig --add livesys-late
-
-# Enable tmpfs for /tmp - this is a good idea
-systemctl enable tmp.mount
-
-# make it so that we don't do writing to the overlay for things which
-# are just tmpdirs/caches
-# note https://bugzilla.redhat.com/show_bug.cgi?id=1135475
-cat >> /etc/fstab << EOF
-vartmp   /var/tmp    tmpfs   defaults   0  0
-EOF
-
-# PackageKit likes to play games. Let's fix that.
-rm -f /var/lib/rpm/__db*
-releasever=$(rpm -q --qf '%{version}\n' --whatprovides system-release)
-basearch=$(uname -i)
-rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
-echo "Packages within this LiveCD"
-rpm -qa
-# Note that running rpm recreates the rpm db files which aren't needed or wanted
-rm -f /var/lib/rpm/__db*
-
-# go ahead and pre-make the man -k cache (#455968)
-/usr/bin/mandb
-
-# make sure there aren't core files lying around
-rm -f /core*
-
-# remove random seed, the newly installed instance should make it's own
-rm -f /var/lib/systemd/random-seed
-
-# convince readahead not to collect
-# FIXME: for systemd
-
-echo 'File created by kickstart. See systemd-update-done.service(8).' \
-    | tee /etc/.updated >/var/.updated
-
-# Drop the rescue kernel and initramfs, we don't need them on the live media itself.
-# See bug 1317709
-rm -f /boot/*-rescue*
-
-# Disable network service here, as doing it in the services line
-# fails due to RHBZ #1369794 - the error is expected
-/sbin/chkconfig network off
-
-# Remove machine-id on generated images
-rm -f /etc/machine-id
-touch /etc/machine-id
-
-%end
-
-
-%post --nochroot
-cp $INSTALL_ROOT/usr/share/licenses/*-release/* $LIVE_ROOT/
-
-# only works on x86_64
-if [ "$(uname -i)" = "i386" -o "$(uname -i)" = "x86_64" ]; then
-    # For livecd-creator builds
-    if [ ! -d $LIVE_ROOT/LiveOS ]; then mkdir -p $LIVE_ROOT/LiveOS ; fi
-    cp /usr/bin/livecd-iso-to-disk $LIVE_ROOT/LiveOS
-
-    # For lorax/livemedia-creator builds
-    sed -i '
-    /## make boot.iso/ i\
-    # Add livecd-iso-to-disk script to .iso filesystem at /LiveOS/\
-    <% f = "usr/bin/livecd-iso-to-disk" %>\
-    %if exists(f):\
-        install ${f} ${LIVEDIR}/${f|basename}\
-    %endif\
-    ' /usr/share/lorax/templates.d/99-generic/live/x86.tmpl
-fi
-
-%end

live/9/ppc64le/prod/rocky-live-base.ks

@@ -1,370 +0,0 @@
-# rocky-live-base.ks
-#
-# Base installation information for Rocky Linux images
-#
-
-lang en_US.UTF-8
-keyboard us
-timezone US/Eastern
-selinux --enforcing
-firewall --enabled --service=mdns
-xconfig --startxonboot
-zerombr
-clearpart --all
-part / --size 5120 --fstype ext4
-services --enabled=NetworkManager,ModemManager --disabled=sshd
-network --bootproto=dhcp --device=link --activate
-rootpw --lock --iscrypted locked
-shutdown
-
-%include rocky-repo.ks
-
-%packages
-@base-x
-@guest-desktop-agents
-@standard
-@core
-@fonts
-@input-methods
-@dial-up
-@multimedia
-@hardware-support
-
-# explicit
-kernel
-kernel-modules
-kernel-modules-extra
-anaconda
-anaconda-install-env-deps
-anaconda-live
-@anaconda-tools
-efi-filesystem
-grub2-common
-grub2-ppc64le
-grub2-ppc64le-modules
-grub2-tools
-grub2-tools-extra
-grub2-tools-minimal
-grubby
-librtas
-libservicelog
-libvpd
-lsvpd
-opal-prd
-ppc64-diag
-ppc64-diag-rtas
-powerpc-utils
-powerpc-utils-core
--shim-unsigned-*64
-
-# Required for SVG rnotes images
-aajohan-comfortaa-fonts
-
-# RHBZ#1242586 - Required for initramfs creation
-dracut-live
-
-# Anaconda needs all the locales available, just like a DVD installer
-glibc-all-langpacks
-
-# This isn't in @core anymore, but livesys still needs it
-initscripts
-chkconfig
-%end
-
-%post
-# FIXME: it'd be better to get this installed from a package
-cat > /etc/rc.d/init.d/livesys << EOF
-#!/bin/bash
-#
-# live: Init script for live image
-#
-# chkconfig: 345 00 99
-# description: Init script for live image.
-### BEGIN INIT INFO
-# X-Start-Before: display-manager chronyd
-### END INIT INFO
-
-. /etc/init.d/functions
-
-if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ]; then
-    exit 0
-fi
-
-if [ -e /.liveimg-configured ] ; then
-    configdone=1
-fi
-
-exists() {
-    which \$1 >/dev/null 2>&1 || return
-    \$*
-}
-
-livedir="LiveOS"
-for arg in \`cat /proc/cmdline\` ; do
-  if [ "\${arg##rd.live.dir=}" != "\${arg}" ]; then
-    livedir=\${arg##rd.live.dir=}
-    continue
-  fi
-  if [ "\${arg##live_dir=}" != "\${arg}" ]; then
-    livedir=\${arg##live_dir=}
-  fi
-done
-
-# Enable swap unless requested otherwise
-swaps=\`blkid -t TYPE=swap -o device\`
-if ! strstr "\`cat /proc/cmdline\`" noswap && [ -n "\$swaps" ] ; then
-  for s in \$swaps ; do
-    action "Enabling swap partition \$s" swapon \$s
-  done
-fi
-if ! strstr "\`cat /proc/cmdline\`" noswap && [ -f /run/initramfs/live/\${livedir}/swap.img ] ; then
-  action "Enabling swap file" swapon /run/initramfs/live/\${livedir}/swap.img
-fi
-
-# Support for persistent homes
-mountPersistentHome() {
-  # support label/uuid
-  if [ "\${homedev##LABEL=}" != "\${homedev}" -o "\${homedev##UUID=}" != "\${homedev}" ]; then
-    homedev=\`/sbin/blkid -o device -t "\$homedev"\`
-  fi
-
-  # if we're given a file rather than a blockdev, loopback it
-  if [ "\${homedev##mtd}" != "\${homedev}" ]; then
-    # mtd devs don't have a block device but get magic-mounted with -t jffs2
-    mountopts="-t jffs2"
-  elif [ ! -b "\$homedev" ]; then
-    loopdev=\`losetup -f\`
-    if [ "\${homedev##/run/initramfs/live}" != "\${homedev}" ]; then
-      action "Remounting live store r/w" mount -o remount,rw /run/initramfs/live
-    fi
-    losetup \$loopdev \$homedev
-    homedev=\$loopdev
-  fi
-
-  # if it's encrypted, we need to unlock it
-  if [ "\$(/sbin/blkid -s TYPE -o value \$homedev 2>/dev/null)" = "crypto_LUKS" ]; then
-    echo
-    echo "Setting up encrypted /home device"
-    plymouth ask-for-password --command="cryptsetup luksOpen \$homedev EncHome"
-    homedev=/dev/mapper/EncHome
-  fi
-
-  # and finally do the mount
-  mount \$mountopts \$homedev /home
-  # if we have /home under what's passed for persistent home, then
-  # we should make that the real /home.  useful for mtd device on olpc
-  if [ -d /home/home ]; then mount --bind /home/home /home ; fi
-  [ -x /sbin/restorecon ] && /sbin/restorecon /home
-  if [ -d /home/liveuser ]; then USERADDARGS="-M" ; fi
-}
-
-# Help locate persistent homes
-findPersistentHome() {
-  for arg in \`cat /proc/cmdline\` ; do
-    if [ "\${arg##persistenthome=}" != "\${arg}" ]; then
-      homedev=\${arg##persistenthome=}
-    fi
-  done
-}
-
-if strstr "\`cat /proc/cmdline\`" persistenthome= ; then
-  findPersistentHome
-elif [ -e /run/initramfs/live/\${livedir}/home.img ]; then
-  homedev=/run/initramfs/live/\${livedir}/home.img
-fi
-
-# Mount the persistent home if it's available
-if ! strstr "\`cat /proc/cmdline\`" nopersistenthome && [ -n "\$homedev" ] ; then
-  action "Mounting persistent /home" mountPersistentHome
-fi
-
-if [ -n "\$configdone" ]; then
-  exit 0
-fi
-
-# Create the liveuser (no password) so automatic logins and sudo works
-action "Adding live user" useradd \$USERADDARGS -c "Live System User" liveuser
-passwd -d liveuser > /dev/null
-usermod -aG wheel liveuser > /dev/null
-
-# Same for root
-passwd -d root > /dev/null
-
-# Turn off firstboot (similar to a DVD/minimal install, where it asks
-# for the user to accept the EULA before bringing up a TTY)
-systemctl --no-reload disable firstboot-text.service 2> /dev/null || :
-systemctl --no-reload disable firstboot-graphical.service 2> /dev/null || :
-systemctl stop firstboot-text.service 2> /dev/null || :
-systemctl stop firstboot-graphical.service 2> /dev/null || :
-
-# Prelinking damages the images
-sed -i 's/PRELINKING=yes/PRELINKING=no/' /etc/sysconfig/prelink &>/dev/null || :
-
-# Turn off mdmonitor by default
-systemctl --no-reload disable mdmonitor.service 2> /dev/null || :
-systemctl --no-reload disable mdmonitor-takeover.service 2> /dev/null || :
-systemctl stop mdmonitor.service 2> /dev/null || :
-systemctl stop mdmonitor-takeover.service 2> /dev/null || :
-
-# Even if there isn't gnome, this doesn't hurt.
-gsettings set org.gnome.software download-updates 'false' || :
-
-# Disable cron
-systemctl --no-reload disable crond.service 2> /dev/null || :
-systemctl --no-reload disable atd.service 2> /dev/null || :
-systemctl stop crond.service 2> /dev/null || :
-systemctl stop atd.service 2> /dev/null || :
-
-# Disable abrt
-systemctl --no-reload disable abrtd.service 2> /dev/null || :
-systemctl stop abrtd.service 2> /dev/null || :
-
-# Don't sync the system clock when running live (RHBZ #1018162)
-sed -i 's/rtcsync//' /etc/chrony.conf
-
-# Mark things as configured
-touch /.liveimg-configured
-
-# add static hostname to work around xauth bug
-# https://bugzilla.redhat.com/show_bug.cgi?id=679486
-# the hostname must be something else than 'localhost'
-# https://bugzilla.redhat.com/show_bug.cgi?id=1370222
-echo "localhost-live" > /etc/hostname
-
-EOF
-
-# HAL likes to start late.
-cat > /etc/rc.d/init.d/livesys-late << EOF
-#!/bin/bash
-#
-# live: Late init script for live image
-#
-# chkconfig: 345 99 01
-# description: Late init script for live image.
-
-. /etc/init.d/functions
-
-if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ] || [ -e /.liveimg-late-configured ] ; then
-    exit 0
-fi
-
-exists() {
-    which \$1 >/dev/null 2>&1 || return
-    \$*
-}
-
-touch /.liveimg-late-configured
-
-# Read some stuff out of the kernel cmdline
-for o in \`cat /proc/cmdline\` ; do
-    case \$o in
-    ks=*)
-        ks="--kickstart=\${o#ks=}"
-        ;;
-    xdriver=*)
-        xdriver="\${o#xdriver=}"
-        ;;
-    esac
-done
-
-# If liveinst or textinst is given, start installer
-if strstr "\`cat /proc/cmdline\`" liveinst ; then
-   plymouth --quit
-   /usr/sbin/liveinst \$ks
-fi
-if strstr "\`cat /proc/cmdline\`" textinst ; then
-   plymouth --quit
-   /usr/sbin/liveinst --text \$ks
-fi
-
-# Configure X, allowing user to override xdriver
-if [ -n "\$xdriver" ]; then
-   cat > /etc/X11/xorg.conf.d/00-xdriver.conf <<FOE
-Section "Device"
-	Identifier	"Videocard0"
-	Driver	"\$xdriver"
-EndSection
-FOE
-fi
-
-EOF
-
-chmod 755 /etc/rc.d/init.d/livesys
-/sbin/restorecon /etc/rc.d/init.d/livesys
-/sbin/chkconfig --add livesys
-
-chmod 755 /etc/rc.d/init.d/livesys-late
-/sbin/restorecon /etc/rc.d/init.d/livesys-late
-/sbin/chkconfig --add livesys-late
-
-# Enable tmpfs for /tmp - this is a good idea
-systemctl enable tmp.mount
-
-# make it so that we don't do writing to the overlay for things which
-# are just tmpdirs/caches
-# note https://bugzilla.redhat.com/show_bug.cgi?id=1135475
-cat >> /etc/fstab << EOF
-vartmp   /var/tmp    tmpfs   defaults   0  0
-EOF
-
-# PackageKit likes to play games. Let's fix that.
-rm -f /var/lib/rpm/__db*
-releasever=$(rpm -q --qf '%{version}\n' --whatprovides system-release)
-basearch=$(uname -i)
-rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
-echo "Packages within this LiveCD"
-rpm -qa
-# Note that running rpm recreates the rpm db files which aren't needed or wanted
-rm -f /var/lib/rpm/__db*
-
-# go ahead and pre-make the man -k cache (#455968)
-/usr/bin/mandb
-
-# make sure there aren't core files lying around
-rm -f /core*
-
-# remove random seed, the newly installed instance should make it's own
-rm -f /var/lib/systemd/random-seed
-
-# convince readahead not to collect
-# FIXME: for systemd
-
-echo 'File created by kickstart. See systemd-update-done.service(8).' \
-    | tee /etc/.updated >/var/.updated
-
-# Drop the rescue kernel and initramfs, we don't need them on the live media itself.
-# See bug 1317709
-rm -f /boot/*-rescue*
-
-# Disable network service here, as doing it in the services line
-# fails due to RHBZ #1369794 - the error is expected
-/sbin/chkconfig network off
-
-# Remove machine-id on generated images
-rm -f /etc/machine-id
-touch /etc/machine-id
-
-%end
-
-
-%post --nochroot
-cp $INSTALL_ROOT/usr/share/licenses/*-release/* $LIVE_ROOT/
-
-# This only works on x86_64
-if [ "$(uname -i)" = "i386" -o "$(uname -i)" = "x86_64" ]; then
-    # For livecd-creator builds
-    if [ ! -d $LIVE_ROOT/LiveOS ]; then mkdir -p $LIVE_ROOT/LiveOS ; fi
-    cp /usr/bin/livecd-iso-to-disk $LIVE_ROOT/LiveOS
-
-    # For lorax/livemedia-creator builds
-    sed -i '
-    /## make boot.iso/ i\
-    # Add livecd-iso-to-disk script to .iso filesystem at /LiveOS/\
-    <% f = "usr/bin/livecd-iso-to-disk" %>\
-    %if exists(f):\
-        install ${f} ${LIVEDIR}/${f|basename}\
-    %endif\
-    ' /usr/share/lorax/templates.d/99-generic/live/x86.tmpl
-fi
-
-%end

live/9/ppc64le/prod/rocky-live-cinnamon-common.ks

@@ -1,77 +0,0 @@
-# cinnamon
-%packages
-rocky-backgrounds
-thunderbird
-firefox
-f36-backgrounds-gnome
-f36-backgrounds-extras-gnome
-f37-backgrounds-gnome
-f37-backgrounds-extras-gnome
-
-NetworkManager-adsl
-NetworkManager-bluetooth
-NetworkManager-l2tp-gnome
-NetworkManager-libreswan-gnome
-NetworkManager-openconnect-gnome
-NetworkManager-openvpn-gnome
-NetworkManager-ppp
-NetworkManager-pptp-gnome
-NetworkManager-wifi
-NetworkManager-wwan
-cinnamon
-cinnamon-control-center
-cinnamon-screensaver
-eom
-firewall-config
-gnome-calculator
-gnome-disk-utility
-gnome-screenshot
-gnome-system-monitor
-gnome-terminal
-gstreamer1-plugins-ugly-free
-gvfs-gphoto2
-gvfs-mtp
-gvfs-smb
-hexchat
-imsettings-systemd
-initial-setup-gui
-lightdm
-metacity
-nemo-fileroller
-nemo-image-converter
-nemo-preview
-nm-connection-editor
-pipewire-alsa
-pipewire-pulseaudio
-powerline
-redshift-gtk
-sane-backends-drivers-scanners
-setroubleshoot
-slick-greeter
-slick-greeter-cinnamon
-tmux
-tmux-powerline
-transmission
-vim-enhanced
-vim-powerline
-xdg-user-dirs-gtk
-xed
-xreader
-wireplumber
-
-parole
-#audacious
-#rhythmbox
-
-libreoffice-calc
-libreoffice-emailmerge
-libreoffice-graphicfilter
-libreoffice-impress
-libreoffice-writer
-
--xsane
--xane-gimp
--mpage
--hplip
--isdn4k-utils
-%end

live/9/ppc64le/prod/rocky-live-cinnamon.ks

@@ -1,64 +0,0 @@
-# rocky-live-cinnamon.ks
-
-%include rocky-live-base-spin.ks
-%include rocky-live-cinnamon-common.ks
-
-part / --size 8192
-
-%post
-# cinnamon configuration
-
-cat > /etc/sysconfig/desktop <<EOF
-PREFERRED=/usr/bin/cinnamon-session
-DISPLAYMANAGER=/usr/sbin/lightdm
-EOF
-
-cat >> /etc/rc.d/init.d/livesys << EOF
-# make the installer show up
-if [ -f /usr/share/applications/liveinst.desktop  ]; then
-  # Show harddisk install in shell dash
-  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
-fi
-mkdir /home/liveuser/Desktop
-cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
-chmod +x /home/liveuser/Desktop/liveinst.desktop
-
-# move to anaconda
-mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
-
-if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop  ]; then
-  mkdir -p ~liveuser/.config/autostart
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
-fi
-
-# set up lightdm autologin
-sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
-sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
-sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
-
-# set cinnamon as default session, otherwise login will fail
-sed -i 's/^#user-session=.*/user-session=cinnamon/' /etc/lightdm/lightdm.conf
-
-# Turn off PackageKit-command-not-found while uninstalled
-if [ -f /etc/PackageKit/CommandNotFound.conf  ]; then
-  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
-fi
-
-# The updater applet might or might not exist
-rm -f /etc/xdg/autostart/org.mageia.dnfdragora-updater.desktop
-
-# reset selinux contexts
-chown -R liveuser:liveuser /home/liveuser/
-restorecon -R /home/liveuser/
-restorecon -R /
-
-EOF
-
-# this doesn't come up automatically. not sure why.
-systemctl enable --force lightdm.service
-
-# CRB needs to be enabled for EPEL to function.
-dnf config-manager --set-enabled crb
-
-%end

live/9/ppc64le/prod/rocky-live-kde-base.ks

@@ -1,110 +0,0 @@
-# Maintained by RelEng
-
-%include rocky-live-base-spin.ks
-%include rocky-live-kde-common.ks
-
-%post
-
-# set default GTK+ theme for root (see #683855, #689070, #808062)
-cat > /root/.gtkrc-2.0 << EOF
-include "/usr/share/themes/Adwaita/gtk-2.0/gtkrc"
-include "/etc/gtk-2.0/gtkrc"
-gtk-theme-name="Adwaita"
-EOF
-mkdir -p /root/.config/gtk-3.0
-cat > /root/.config/gtk-3.0/settings.ini << EOF
-[Settings]
-gtk-theme-name = Adwaita
-EOF
-
-# add initscript
-cat >> /etc/rc.d/init.d/livesys << EOF
-
-# are we *not* able to use wayland sessions?
-if strstr "\`cat /proc/cmdline\`" nomodeset ; then
-PLASMA_SESSION_FILE="plasmax11.desktop"
-else
-PLASMA_SESSION_FILE="plasma.desktop"
-fi
-
-# set up autologin for user liveuser
-if [ -f /etc/sddm.conf ]; then
-sed -i 's/^#User=.*/User=liveuser/' /etc/sddm.conf
-sed -i "s/^#Session=.*/Session=\${PLASMA_SESSION_FILE}/" /etc/sddm.conf
-else
-cat > /etc/sddm.conf << SDDM_EOF
-[Autologin]
-User=liveuser
-Session=\${PLASMA_SESSION_FILE}
-SDDM_EOF
-fi
-
-# add liveinst.desktop to favorites menu
-mkdir -p /home/liveuser/.config/
-cat > /home/liveuser/.config/kickoffrc << MENU_EOF
-[Favorites]
-FavoriteURLs=/usr/share/applications/firefox.desktop,/usr/share/applications/org.kde.dolphin.desktop,/usr/share/applications/systemsettings.desktop,/usr/share/applications/org.kde.konsole.desktop,/usr/share/applications/liveinst.desktop
-MENU_EOF
-
-# show liveinst.desktop on desktop and in menu
-sed -i 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop
-# set executable bit disable KDE security warning
-chmod +x /usr/share/applications/liveinst.desktop
-mkdir /home/liveuser/Desktop
-cp -a /usr/share/applications/liveinst.desktop /home/liveuser/Desktop/
-
-if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop   ]; then
-  mkdir -p ~liveuser/.config/autostart
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
-fi
-
-# Set akonadi backend
-mkdir -p /home/liveuser/.config/akonadi
-cat > /home/liveuser/.config/akonadi/akonadiserverrc << AKONADI_EOF
-[%General]
-Driver=QSQLITE3
-AKONADI_EOF
-
-# "Disable plasma-discover-notifier"
-mkdir -p /home/liveuser/.config/autostart
-cp -a /etc/xdg/autostart/org.kde.discover.notifier.desktop /home/liveuser/.config/autostart/
-echo 'Hidden=true' >> /home/liveuser/.config/autostart/org.kde.discover.notifier.desktop
-
-# Disable baloo
-cat > /home/liveuser/.config/baloofilerc << BALOO_EOF
-[Basic Settings]
-Indexing-Enabled=false
-BALOO_EOF
-
-# Disable kres-migrator
-cat > /home/liveuser/.kde/share/config/kres-migratorrc << KRES_EOF
-[Migration]
-Enabled=false
-KRES_EOF
-
-# Disable kwallet migrator
-cat > /home/liveuser/.config/kwalletrc << KWALLET_EOL
-[Migration]
-alreadyMigrated=true
-KWALLET_EOL
-# Disable automount of 'known' devices
-# https://bugzilla.redhat.com/show_bug.cgi?id=2073708
-cat > /home/liveuser/.config/kded_device_automounterrc << AUTOMOUNTER_EOF
-[General]
-AutomountEnabled=false
-AutomountOnLogin=false
-AutomountOnPlugin=false
-AUTOMOUNTER_EOF
-
-# make sure to set the right permissions and selinux contexts
-chown -R liveuser:liveuser /home/liveuser/
-restorecon -R /home/liveuser/
-restorecon -R /
-
-EOF
-
-systemctl enable --force sddm.service
-dnf config-manager --set-enabled crb
-
-%end

live/9/ppc64le/prod/rocky-live-kde-common.ks

@@ -1,79 +0,0 @@
-
-%packages
-# install env-group to resolve RhBug:1891500
-@^kde-desktop-environment
-
-@firefox
-@kde-apps
-@kde-media
-
-# Libreoffice
-libreoffice-calc
-libreoffice-emailmerge
-libreoffice-graphicfilter
-libreoffice-impress
-libreoffice-writer
-
--@admin-tools
-
-### The KDE-Desktop
-
-### fixes
-sddm
-sddm-breeze
-sddm-themes
-sddm-kcm
-
-# use kde-print-manager instead of system-config-printer
--system-config-printer
-# make sure mariadb lands instead of MySQL (hopefully a temporary hack)
-mariadb-embedded
-mariadb-connector-c
-mariadb-server
-
-# minimal localization support - allows installing the kde-l10n-* packages
-#kde-l10n <- Not in EL8
-
-# unwanted packages from @kde-desktop
-# don't include these for now to fit on a cd
--desktop-backgrounds-basic
--kdeaccessibility*
--ktorrent			# kget has also basic torrent features (~3 megs)
--digikam			# digikam has duplicate functionality with gwenview (~28 megs)
--kipi-plugins			# ~8 megs + drags in Marble
--krusader			# ~4 megs
--k3b				# ~15 megs
-
-#-kdeplasma-addons		# ~16 megs
-
-# Additional packages that are not default in kde-* groups, but useful
-#kdeartwork			# only include some parts of kdeartwork
-fuse
-#mediawriter <-- Not in EL8
-
-### space issues
-
-# admin-tools
--gnome-disk-utility
-# kcm_clock still lacks some features, so keep system-config-date around
-#-system-config-date
-# prefer kcm_systemd
--system-config-services
-# prefer/use kusers
--system-config-users
-
-# we need to keep epel-release, otherwise we can't update
-epel-release
-
-### MINIMIZATION ###
--mpage
--hplip
--isdn4k-utils
--xsane
--xsane-gimp
--@input-methods
--scim*
--iok
-
-%end
-

live/9/ppc64le/prod/rocky-live-kde-minimization.ks

@@ -1,6 +0,0 @@
-# Remove a few things we don't need
-%packages
--@input-methods
--scim*
--iok
-%end

live/9/ppc64le/prod/rocky-live-kde.ks

@@ -1,9 +0,0 @@
-# rocky-live-kde.ks
-
-%include rocky-live-kde-base.ks
-
-# DVD
-part / --size=7300
-
-%post
-%end

live/9/ppc64le/prod/rocky-live-mate-common.ks

@@ -1,137 +0,0 @@
-# mate
-%packages
-rocky-backgrounds
-thunderbird
-firefox
-f36-backgrounds-mate
-f36-backgrounds-extras-mate
-f37-backgrounds-mate
-f37-backgrounds-extras-mate
-
-NetworkManager-adsl
-NetworkManager-bluetooth
-NetworkManager-l2tp-gnome
-NetworkManager-libreswan-gnome
-NetworkManager-openconnect-gnome
-NetworkManager-openvpn-gnome
-NetworkManager-ovs
-NetworkManager-ppp
-NetworkManager-pptp-gnome
-NetworkManager-team
-NetworkManager-wifi
-NetworkManager-wwan
-atril
-atril-caja
-atril-thumbnailer
-caja
-caja-actions
-dconf-editor
-engrampa
-eom
-filezilla
-firewall-config
-gnome-disk-utility
-gnome-epub-thumbnailer
-gnome-logs
-gnome-themes-extra
-gparted
-gstreamer1-plugins-ugly-free
-gtk2-engines
-gucharmap
-gvfs-fuse
-gvfs-gphoto2
-gvfs-mtp
-gvfs-smb
-hexchat
-initial-setup-gui
-libmatekbd
-libmatemixer
-libmateweather
-libsecret
-lightdm
-lm_sensors
-marco
-mate-applets
-mate-backgrounds
-mate-calc
-mate-control-center
-mate-desktop
-mate-dictionary
-mate-disk-usage-analyzer
-mate-icon-theme
-mate-media
-mate-menus
-mate-menus-preferences-category-menu
-mate-notification-daemon
-mate-panel
-mate-polkit
-mate-power-manager
-mate-screensaver
-mate-screenshot
-mate-search-tool
-mate-session-manager
-mate-settings-daemon
-mate-system-log
-mate-system-monitor
-mate-terminal
-mate-themes
-mate-user-admin
-mate-user-guide
-mozo
-network-manager-applet
-nm-connection-editor
-orca
-p7zip
-p7zip-plugins
-parole
-pavucontrol
-pipewire-alsa
-pipewire-pulseaudio
-pluma
-seahorse
-seahorse-caja
-setroubleshoot
-slick-greeter-mate
-usermode-gtk
-vim-enhanced
-wireplumber
-xdg-user-dirs-gtk
-xmodmap
-xrdb
-yelp
-
-firewall-applet
-mate-menu
-mate-sensors-applet
-mate-utils
-pluma-plugins
-tigervnc
-
-libreoffice-calc
-libreoffice-emailmerge
-libreoffice-graphicfilter
-libreoffice-impress
-libreoffice-writer
-
--@3d-printing
--@admin-tools
--brasero
--fedora-icon-theme
--gnome-icon-theme
--gnome-icon-theme-symbolic
--gnome-logs
--gnome-software
--gnome-user-docs
--gnome-user-docs
--evolution-help
--telnet
--audacious
--systemd-oomd-defaults
-
--xsane
--xane-gimp
--sane-backends
--mpage
--hplip
--isdn4k-utils
-%end

live/9/ppc64le/prod/rocky-live-mate.ks

@@ -1,63 +0,0 @@
-# rocky-live-kde.ks
-# BROKEN
-
-%include rocky-live-base-spin.ks
-%include rocky-live-mate-common.ks
-
-part / --size 7168
-
-%post
-# mate configuration
-
-cat >> /etc/rc.d/init.d/livesys << EOF
-# make the installer show up
-if [ -f /usr/share/applications/liveinst.desktop  ]; then
-  # Show harddisk install in shell dash
-  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
-fi
-mkdir /home/liveuser/Desktop
-cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
-chmod +x /home/liveuser/Desktop/liveinst.desktop
-
-# move to anaconda - probably not required for MATE.
-mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
-
-if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop  ]; then
-  mkdir -p ~liveuser/.config/autostart
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
-fi
-
-# rebuild schema cache with any overrides we installed
-glib-compile-schemas /usr/share/glib-2.0/schemas
-
-# set up lightdm autologin
-sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
-sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
-sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
-
-# set MATE as default session, otherwise login will fail
-sed -i 's/^#user-session=.*/user-session=mate/' /etc/lightdm/lightdm.conf
-
-# Turn off PackageKit-command-not-found while uninstalled
-if [ -f /etc/PackageKit/CommandNotFound.conf  ]; then
-  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
-fi
-
-# The updater applet might or might not exist
-rm -f /etc/xdg/autostart/org.mageia.dnfdragora-updater.desktop
-
-# reset selinux contexts
-chown -R liveuser:liveuser /home/liveuser/
-restorecon -R /home/liveuser/
-restorecon -R /
-
-EOF
-
-# this doesn't come up automatically. not sure why.
-systemctl enable --force lightdm.service
-
-# CRB needs to be enabled for EPEL to function.
-dnf config-manager --set-enabled crb
-
-%end

live/9/ppc64le/prod/rocky-live-minimization.ks

@@ -1,14 +0,0 @@
-# Saving space
-%packages
-
-# save some space
--mpage
--hplip
--isdn4k-utils
-
-# scanning takes quite a bit of space :/
--xsane
--xsane-gimp
--sane-backends
-
-%end

live/9/ppc64le/prod/rocky-live-workstation-lite.ks

@@ -1,101 +0,0 @@
-# Maintained by Release Engineering
-# mailto:releng@rockylinux.org
-
-%include rocky-live-base.ks
-%include rocky-workstation-common-lite.ks
-#
-# Disable this for now as packagekit is causing compose failures
-# by leaving a gpg-agent around holding /dev/null open.
-#
-#include snippets/packagekit-cached-metadata.ks
-
-part / --size 7750
-
-%post
-
-cat >> /etc/rc.d/init.d/livesys << EOF
-
-
-# disable gnome-software automatically downloading updates
-cat >> /usr/share/glib-2.0/schemas/org.gnome.software.gschema.override << FOE
-[org.gnome.software]
-download-updates=false
-FOE
-
-# don't autostart gnome-software session service
-rm -f /etc/xdg/autostart/gnome-software-service.desktop
-
-# disable the gnome-software shell search provider
-cat >> /usr/share/gnome-shell/search-providers/org.gnome.Software-search-provider.ini << FOE
-DefaultDisabled=true
-FOE
-
-# don't run gnome-initial-setup
-mkdir ~liveuser/.config
-touch ~liveuser/.config/gnome-initial-setup-done
-
-# suppress anaconda spokes redundant with gnome-initial-setup
-cat >> /etc/sysconfig/anaconda << FOE
-[NetworkSpoke]
-visited=1
-
-[PasswordSpoke]
-visited=1
-
-[UserSpoke]
-visited=1
-FOE
-
-# make the installer show up
-if [ -f /usr/share/applications/liveinst.desktop ]; then
-  # Show harddisk install in shell dash
-  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
-  # need to move it to anaconda.desktop to make shell happy
-  mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
-
-  cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
-[org.gnome.shell]
-favorite-apps=['firefox.desktop', 'evolution.desktop', 'org.gnome.Nautilus.desktop', 'anaconda.desktop']
-FOE
-
-  # Make the welcome screen show up
-  if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop ]; then
-    mkdir -p ~liveuser/.config/autostart
-    cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
-    cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
-  fi
-
-  # Disable GNOME welcome tour so it doesn't overlap with Fedora welcome screen
-  cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
-welcome-dialog-last-shown-version='4294967295'
-FOE
-
-  # Copy Anaconda branding in place
-  if [ -d /usr/share/lorax/product/usr/share/anaconda ]; then
-    cp -a /usr/share/lorax/product/* /
-  fi
-fi
-
-# rebuild schema cache with any overrides we installed
-glib-compile-schemas /usr/share/glib-2.0/schemas
-
-# set up auto-login
-cat > /etc/gdm/custom.conf << FOE
-[daemon]
-AutomaticLoginEnable=True
-AutomaticLogin=liveuser
-FOE
-
-# Turn off PackageKit-command-not-found while uninstalled
-if [ -f /etc/PackageKit/CommandNotFound.conf ]; then
-  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
-fi
-
-# make sure to set the right permissions and selinux contexts
-chown -R liveuser:liveuser /home/liveuser/
-restorecon -R /home/liveuser/
-restorecon -R /
-
-EOF
-
-%end

live/9/ppc64le/prod/rocky-live-workstation.ks

@@ -1,102 +0,0 @@
-# Maintained by Release Engineering
-# mailto:releng@rockylinux.org
-
-%include rocky-live-base.ks
-%include rocky-workstation-common.ks
-#
-# Disable this for now as packagekit is causing compose failures
-# by leaving a gpg-agent around holding /dev/null open.
-#
-#include snippets/packagekit-cached-metadata.ks
-
-part / --size 7750
-
-%post
-
-cat >> /etc/rc.d/init.d/livesys << EOF
-
-
-# disable gnome-software automatically downloading updates
-cat >> /usr/share/glib-2.0/schemas/org.gnome.software.gschema.override << FOE
-[org.gnome.software]
-allow-updates=false
-download-updates=false
-FOE
-
-# don't autostart gnome-software session service
-rm -f /etc/xdg/autostart/gnome-software-service.desktop
-
-# disable the gnome-software shell search provider
-cat >> /usr/share/gnome-shell/search-providers/org.gnome.Software-search-provider.ini << FOE
-DefaultDisabled=true
-FOE
-
-# don't run gnome-initial-setup
-mkdir ~liveuser/.config
-touch ~liveuser/.config/gnome-initial-setup-done
-
-# suppress anaconda spokes redundant with gnome-initial-setup
-cat >> /etc/sysconfig/anaconda << FOE
-[NetworkSpoke]
-visited=1
-
-[PasswordSpoke]
-visited=1
-
-[UserSpoke]
-visited=1
-FOE
-
-# make the installer show up
-if [ -f /usr/share/applications/liveinst.desktop ]; then
-  # Show harddisk install in shell dash
-  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
-  # need to move it to anaconda.desktop to make shell happy
-  mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
-
-  cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
-[org.gnome.shell]
-favorite-apps=['firefox.desktop', 'evolution.desktop', 'org.gnome.Nautilus.desktop', 'anaconda.desktop']
-FOE
-
-  # Make the welcome screen show up
-  if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop ]; then
-    mkdir -p ~liveuser/.config/autostart
-    cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
-    cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
-  fi
-
-  # Disable GNOME welcome tour so it doesn't overlap with Fedora welcome screen
-  cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
-welcome-dialog-last-shown-version='4294967295'
-FOE
-
-  # Copy Anaconda branding in place
-  if [ -d /usr/share/lorax/product/usr/share/anaconda ]; then
-    cp -a /usr/share/lorax/product/* /
-  fi
-fi
-
-# rebuild schema cache with any overrides we installed
-glib-compile-schemas /usr/share/glib-2.0/schemas
-
-# set up auto-login
-cat > /etc/gdm/custom.conf << FOE
-[daemon]
-AutomaticLoginEnable=True
-AutomaticLogin=liveuser
-FOE
-
-# Turn off PackageKit-command-not-found while uninstalled
-if [ -f /etc/PackageKit/CommandNotFound.conf ]; then
-  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
-fi
-
-# make sure to set the right permissions and selinux contexts
-chown -R liveuser:liveuser /home/liveuser/
-restorecon -R /home/liveuser/
-restorecon -R /
-
-EOF
-
-%end

live/9/ppc64le/prod/rocky-live-xfce-common.ks

@@ -1,92 +0,0 @@
-# xfce
-%packages
-
-# these aren't an epel thing for some reason.
-@xfce-desktop --nodefaults
-#@^xfce-desktop-environment
-#@xfce-apps
-#@xfce-extra-plugins
-#@xfce-media
-#@xfce-office
-
-# Manual install...
-#geany
-gparted
-#mousepad
-#ristretto
-seahorse
-#transmission
-pcp-selinux
-lightdm
-#gdm
--gdm
--gnome-shell
-
-# Some stuff might already be here, doesn't hurt to list it.
-firefox
-thunderbird
-firewall-config
-#pidgin
-rocky-backgrounds
-gparted
-#rhythmbox
-
-# extras
-f35-backgrounds-xfce
-f35-backgrounds-extras-xfce
-f36-backgrounds-xfce
-f36-backgrounds-extras-xfce
-f37-backgrounds-xfce
-f37-backgrounds-extras-xfce
-
-xfce4-about
-xfce4-taskmanager
-#xfce4-battery-plugin
-xfce4-datetime-plugin
-xfce4-netload-plugin
-#xfce4-places-plugin
-xfce4-screenshooter-plugin
-xfce4-smartbookmark-plugin
-xfce4-systemload-plugin
-xfce4-time-out-plugin
-xfce4-weather-plugin
-xfce4-whiskermenu-plugin
-#xfdashboard
-#xfdashboard-themes
-pavucontrol
-
-# XFCE group defaults
-xfce4-appfinder
-xfce4-power-manager
-#xfce4-pulseaudio-plugin
-xfce4-screensaver
-xfce4-terminal
-network-manager-applet
-openssh-askpass
-thunar-archive-plugin
-thunar-volman
-tumbler
-xfce-polkit
-
-wget
-xdg-user-dirs
-xdg-user-dirs-gtk
-
-# save some space
--autofs
--acpid
--gimp-help
--desktop-backgrounds-basic
--aspell-*
--xfce4-sensors-plugin
--xfce4-eyes-plugin
-
-### MINIMIZATION
--mpage
--hplip
--isdn4k-utils
--xsane
--xsane-gimp
--sane-backends
-
-%end

live/9/ppc64le/prod/rocky-live-xfce.ks

@@ -1,95 +0,0 @@
-# rocky-live-kde.ks
-# BROKEN
-
-%include rocky-live-base-spin.ks
-%include rocky-live-xfce-common.ks
-
-part / --size 6144
-
-%post
-# xfce configuration
-
-# create /etc/sysconfig/desktop (needed for installation)
-
-cat > /etc/sysconfig/desktop <<EOF
-PREFERRED=/usr/bin/startxfce4
-DISPLAYMANAGER=/usr/sbin/lightdm
-EOF
-
-cat >> /etc/rc.d/init.d/livesys << EOF
-
-mkdir -p /home/liveuser/.config/xfce4
-# ugly stuff, this should give us a default background for now
-#mkdir -p /usr/share/backgrounds/images
-#ln -s /usr/share/backgrounds/f32/default/f32.png \
-#  /usr/share/backgrounds/images/default.png
-
-cat > /home/liveuser/.config/xfce4/helpers.rc << FOE
-MailReader=sylpheed-claws
-FileManager=Thunar
-WebBrowser=firefox
-FOE
-
-# disable screensaver locking (#674410)
-cat >> /home/liveuser/.xscreensaver << FOE
-mode:           off
-lock:           False
-dpmsEnabled:    False
-FOE
-
-# deactivate xfconf-migration (#683161)
-rm -f /etc/xdg/autostart/xfconf-migration-4.6.desktop || :
-
-# deactivate xfce4-panel first-run dialog (#693569)
-mkdir -p /home/liveuser/.config/xfce4/xfconf/xfce-perchannel-xml
-cp /etc/xdg/xfce4/panel/default.xml /home/liveuser/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-panel.xml
-
-# set up lightdm autologin
-sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
-sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
-sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
-
-# set Xfce as default session, otherwise login will fail
-sed -i 's/^#user-session=.*/user-session=xfce/' /etc/lightdm/lightdm.conf
-
-# debrand
-#sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/fedora-welcome.desktop
-#sed -i "s/RHEL/Rocky Linux/g" /usr/share/anaconda/gnome/fedora-welcome
-#sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/fedora-welcome
-#sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/anaconda/gnome/fedora-welcome
-#sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/applications/liveinst.desktop
-
-# Show harddisk install on the desktop
-sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop
-mkdir /home/liveuser/Desktop
-cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop/
-
-if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop  ]; then
-  mkdir -p ~liveuser/.config/autostart
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
-fi
-
-# no updater applet in live environment
-rm -f /etc/xdg/autostart/org.mageia.dnfdragora-updater.desktop
-
-# and mark it as executable (new Xfce security feature)
-chmod +x /home/liveuser/Desktop/liveinst.desktop
-
-# move to anaconda - probably not required for XFCE.
-mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
-
-# this goes at the end after all other changes. 
-chown -R liveuser:liveuser /home/liveuser
-restorecon -R /home/liveuser
-#restorecon -R /
-
-EOF
-
-# this doesn't come up automatically. not sure why.
-systemctl enable --force lightdm.service
-
-# CRB needs to be enabled for EPEL to function.
-dnf config-manager --set-enabled crb
-
-%end

live/9/ppc64le/prod/rocky-repo-epel.ks

@@ -1,14 +0,0 @@
-# These should change based on the major/minor release
-
-# Deps repo, there are some anaconda packages that are *not* available by default
-repo --name=BaseOS --cost=200 --baseurl=http://dl.rockylinux.org/pub/rocky/9/BaseOS/$basearch/os/
-repo --name=AppStream --cost=200 --baseurl=http://dl.rockylinux.org/pub/rocky/9/AppStream/$basearch/os/
-repo --name=CRB --cost=200 --baseurl=http://dl.rockylinux.org/pub/rocky/9/CRB/$basearch/os/
-repo --name=extras --cost=200 --baseurl=http://dl.rockylinux.org/pub/rocky/9/extras/$basearch/os
-
-# EPEL (required for KDE and XFCE)
-repo --name=epel --cost=200 --baseurl=https://dl.fedoraproject.org/pub/epel/9/Everything/$basearch/
-#repo --name=epel-modular --cost=200 --baseurl=https://dl.fedoraproject.org/pub/epel/9/Modular/$basearch/
-
-# URL to the base os repo
-url --url=http://dl.rockylinux.org/pub/rocky/9/BaseOS/$basearch/os/

live/9/ppc64le/prod/rocky-repo.ks

@@ -1,10 +0,0 @@
-# These should change based on the major/minor release
-
-# Base repos
-repo --name=BaseOS --cost=200 --baseurl=http://dl.rockylinux.org/pub/rocky/9/BaseOS/$basearch/os/
-repo --name=AppStream --cost=200 --baseurl=http://dl.rockylinux.org/pub/rocky/9/AppStream/$basearch/os/
-repo --name=CRB --cost=200 --baseurl=http://dl.rockylinux.org/pub/rocky/9/CRB/$basearch/os/
-repo --name=extras --cost=200 --baseurl=http://dl.rockylinux.org/pub/rocky/9/extras/$basearch/os
-
-# URL to the base os repo
-url --url=http://dl.rockylinux.org/pub/rocky/9/BaseOS/$basearch/os/

live/9/ppc64le/prod/rocky-workstation-common-lite.ks

@@ -1,27 +0,0 @@
-%packages
-
-# Exclude unwanted groups that rocky-live-base.ks pulls in
--@dial-up
--@input-methods
--@standard
-
-# Make sure to sync any additions / removals done here with
-# workstation-product-environment in comps
-@base-x
-@core
-@fonts
-@gnome-desktop
-@guest-desktop-agents
-@hardware-support
-@internet-browser
-@networkmanager-submodules
-
-# Libreoffice
-libreoffice-calc
-libreoffice-writer
-
-# Exclude unwanted packages from @anaconda-tools group
--gfs2-utils
--reiserfs-utils
-
-%end

live/9/ppc64le/prod/rocky-workstation-common.ks

@@ -1,32 +0,0 @@
-%packages
-
-# Exclude unwanted groups that rocky-live-base.ks pulls in
--@dial-up
--@input-methods
--@standard
-
-# Make sure to sync any additions / removals done here with
-# workstation-product-environment in comps
-@base-x
-@core
-@fonts
-@gnome-desktop
-@guest-desktop-agents
-@hardware-support
-@internet-browser
-@multimedia
-@networkmanager-submodules
-@workstation-product
-
-# Libreoffice
-libreoffice-calc
-libreoffice-emailmerge
-libreoffice-graphicfilter
-libreoffice-impress
-libreoffice-writer
-
-# Exclude unwanted packages from @anaconda-tools group
--gfs2-utils
--reiserfs-utils
-
-%end

live/9/ppc64le/stage/rocky-live-base-spin.ks

@@ -1,374 +0,0 @@
-# rocky-live-base-spin.ks
-#
-# Base installation information for Rocky Linux images
-# Contains EPEL.
-#
-
-lang en_US.UTF-8
-keyboard us
-timezone US/Eastern
-selinux --enforcing
-firewall --enabled --service=mdns
-xconfig --startxonboot
-zerombr
-clearpart --all
-part / --size 5120 --fstype ext4
-services --enabled=NetworkManager,ModemManager --disabled=sshd
-network --bootproto=dhcp --device=link --activate
-rootpw --lock --iscrypted locked
-shutdown
-
-%include rocky-repo-epel.ks
-
-%packages
-@base-x
-@guest-desktop-agents
-@standard
-@core
-@fonts
-@input-methods
-@dial-up
-@multimedia
-@hardware-support
-
-# explicit
-kernel
-kernel-modules
-kernel-modules-extra
-anaconda
-anaconda-install-env-deps
-anaconda-live
-@anaconda-tools
-efi-filesystem
-grub2-common
-grub2-ppc64le
-grub2-ppc64le-modules
-grub2-tools
-grub2-tools-extra
-grub2-tools-minimal
-grubby
-librtas
-libservicelog
-libvpd
-lsvpd
-opal-prd
-ppc64-diag
-ppc64-diag-rtas
-powerpc-utils
-powerpc-utils-core
--shim-unsigned-*64
-
-# Required for SVG rnotes images
-aajohan-comfortaa-fonts
-
-# RHBZ#1242586 - Required for initramfs creation
-dracut-live
-
-# Anaconda needs all the locales available, just like a DVD installer
-glibc-all-langpacks
-
-# no longer in @core since 2018-10, but needed for livesys script
-initscripts
-chkconfig
-
-# absolutely required - don't want a system that can't actually update
-epel-release
-%end
-
-%post
-# FIXME: it'd be better to get this installed from a package
-cat > /etc/rc.d/init.d/livesys << EOF
-#!/bin/bash
-#
-# live: Init script for live image
-#
-# chkconfig: 345 00 99
-# description: Init script for live image.
-### BEGIN INIT INFO
-# X-Start-Before: display-manager chronyd
-### END INIT INFO
-
-. /etc/init.d/functions
-
-if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ]; then
-    exit 0
-fi
-
-if [ -e /.liveimg-configured ] ; then
-    configdone=1
-fi
-
-exists() {
-    which \$1 >/dev/null 2>&1 || return
-    \$*
-}
-
-livedir="LiveOS"
-for arg in \`cat /proc/cmdline\` ; do
-  if [ "\${arg##rd.live.dir=}" != "\${arg}" ]; then
-    livedir=\${arg##rd.live.dir=}
-    continue
-  fi
-  if [ "\${arg##live_dir=}" != "\${arg}" ]; then
-    livedir=\${arg##live_dir=}
-  fi
-done
-
-# Enable swap unless requested otherwise
-swaps=\`blkid -t TYPE=swap -o device\`
-if ! strstr "\`cat /proc/cmdline\`" noswap && [ -n "\$swaps" ] ; then
-  for s in \$swaps ; do
-    action "Enabling swap partition \$s" swapon \$s
-  done
-fi
-if ! strstr "\`cat /proc/cmdline\`" noswap && [ -f /run/initramfs/live/\${livedir}/swap.img ] ; then
-  action "Enabling swap file" swapon /run/initramfs/live/\${livedir}/swap.img
-fi
-
-# Support for persistent homes
-mountPersistentHome() {
-  # support label/uuid
-  if [ "\${homedev##LABEL=}" != "\${homedev}" -o "\${homedev##UUID=}" != "\${homedev}" ]; then
-    homedev=\`/sbin/blkid -o device -t "\$homedev"\`
-  fi
-
-  # if we're given a file rather than a blockdev, loopback it
-  if [ "\${homedev##mtd}" != "\${homedev}" ]; then
-    # mtd devs don't have a block device but get magic-mounted with -t jffs2
-    mountopts="-t jffs2"
-  elif [ ! -b "\$homedev" ]; then
-    loopdev=\`losetup -f\`
-    if [ "\${homedev##/run/initramfs/live}" != "\${homedev}" ]; then
-      action "Remounting live store r/w" mount -o remount,rw /run/initramfs/live
-    fi
-    losetup \$loopdev \$homedev
-    homedev=\$loopdev
-  fi
-
-  # if it's encrypted, we need to unlock it
-  if [ "\$(/sbin/blkid -s TYPE -o value \$homedev 2>/dev/null)" = "crypto_LUKS" ]; then
-    echo
-    echo "Setting up encrypted /home device"
-    plymouth ask-for-password --command="cryptsetup luksOpen \$homedev EncHome"
-    homedev=/dev/mapper/EncHome
-  fi
-
-  # and finally do the mount
-  mount \$mountopts \$homedev /home
-  # if we have /home under what's passed for persistent home, then
-  # we should make that the real /home.  useful for mtd device on olpc
-  if [ -d /home/home ]; then mount --bind /home/home /home ; fi
-  [ -x /sbin/restorecon ] && /sbin/restorecon /home
-  if [ -d /home/liveuser ]; then USERADDARGS="-M" ; fi
-}
-
-# Help locate persistent homes
-findPersistentHome() {
-  for arg in \`cat /proc/cmdline\` ; do
-    if [ "\${arg##persistenthome=}" != "\${arg}" ]; then
-      homedev=\${arg##persistenthome=}
-    fi
-  done
-}
-
-if strstr "\`cat /proc/cmdline\`" persistenthome= ; then
-  findPersistentHome
-elif [ -e /run/initramfs/live/\${livedir}/home.img ]; then
-  homedev=/run/initramfs/live/\${livedir}/home.img
-fi
-
-# Mount the persistent home if it's available
-if ! strstr "\`cat /proc/cmdline\`" nopersistenthome && [ -n "\$homedev" ] ; then
-  action "Mounting persistent /home" mountPersistentHome
-fi
-
-if [ -n "\$configdone" ]; then
-  exit 0
-fi
-
-# Create the liveuser (no password) so automatic logins and sudo works
-action "Adding live user" useradd \$USERADDARGS -c "Live System User" liveuser
-passwd -d liveuser > /dev/null
-usermod -aG wheel liveuser > /dev/null
-
-# Same for root
-passwd -d root > /dev/null
-
-# Turn off firstboot (similar to a DVD/minimal install, where it asks
-# for the user to accept the EULA before bringing up a TTY)
-systemctl --no-reload disable firstboot-text.service 2> /dev/null || :
-systemctl --no-reload disable firstboot-graphical.service 2> /dev/null || :
-systemctl stop firstboot-text.service 2> /dev/null || :
-systemctl stop firstboot-graphical.service 2> /dev/null || :
-
-# Prelinking damages the images
-sed -i 's/PRELINKING=yes/PRELINKING=no/' /etc/sysconfig/prelink &>/dev/null || :
-
-# Turn off mdmonitor by default
-systemctl --no-reload disable mdmonitor.service 2> /dev/null || :
-systemctl --no-reload disable mdmonitor-takeover.service 2> /dev/null || :
-systemctl stop mdmonitor.service 2> /dev/null || :
-systemctl stop mdmonitor-takeover.service 2> /dev/null || :
-
-# Even if there isn't gnome, this doesn't hurt.
-gsettings set org.gnome.software download-updates 'false' || :
-
-# Disable cron
-systemctl --no-reload disable crond.service 2> /dev/null || :
-systemctl --no-reload disable atd.service 2> /dev/null || :
-systemctl stop crond.service 2> /dev/null || :
-systemctl stop atd.service 2> /dev/null || :
-
-# Disable abrt
-systemctl --no-reload disable abrtd.service 2> /dev/null || :
-systemctl stop abrtd.service 2> /dev/null || :
-
-# Don't sync the system clock when running live (RHBZ #1018162)
-sed -i 's/rtcsync//' /etc/chrony.conf
-
-# Mark things as configured
-touch /.liveimg-configured
-
-# add static hostname to work around xauth bug
-# https://bugzilla.redhat.com/show_bug.cgi?id=679486
-# the hostname must be something else than 'localhost'
-# https://bugzilla.redhat.com/show_bug.cgi?id=1370222
-echo "localhost-live" > /etc/hostname
-
-EOF
-
-# HAL likes to start late.
-cat > /etc/rc.d/init.d/livesys-late << EOF
-#!/bin/bash
-#
-# live: Late init script for live image
-#
-# chkconfig: 345 99 01
-# description: Late init script for live image.
-
-. /etc/init.d/functions
-
-if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ] || [ -e /.liveimg-late-configured ] ; then
-    exit 0
-fi
-
-exists() {
-    which \$1 >/dev/null 2>&1 || return
-    \$*
-}
-
-touch /.liveimg-late-configured
-
-# Read some stuff out of the kernel cmdline
-for o in \`cat /proc/cmdline\` ; do
-    case \$o in
-    ks=*)
-        ks="--kickstart=\${o#ks=}"
-        ;;
-    xdriver=*)
-        xdriver="\${o#xdriver=}"
-        ;;
-    esac
-done
-
-# If liveinst or textinst is given, start installer
-if strstr "\`cat /proc/cmdline\`" liveinst ; then
-   plymouth --quit
-   /usr/sbin/liveinst \$ks
-fi
-if strstr "\`cat /proc/cmdline\`" textinst ; then
-   plymouth --quit
-   /usr/sbin/liveinst --text \$ks
-fi
-
-# Configure X, allowing user to override xdriver
-if [ -n "\$xdriver" ]; then
-   cat > /etc/X11/xorg.conf.d/00-xdriver.conf <<FOE
-Section "Device"
-	Identifier	"Videocard0"
-	Driver	"\$xdriver"
-EndSection
-FOE
-fi
-
-EOF
-
-chmod 755 /etc/rc.d/init.d/livesys
-/sbin/restorecon /etc/rc.d/init.d/livesys
-/sbin/chkconfig --add livesys
-
-chmod 755 /etc/rc.d/init.d/livesys-late
-/sbin/restorecon /etc/rc.d/init.d/livesys-late
-/sbin/chkconfig --add livesys-late
-
-# Enable tmpfs for /tmp - this is a good idea
-systemctl enable tmp.mount
-
-# make it so that we don't do writing to the overlay for things which
-# are just tmpdirs/caches
-# note https://bugzilla.redhat.com/show_bug.cgi?id=1135475
-cat >> /etc/fstab << EOF
-vartmp   /var/tmp    tmpfs   defaults   0  0
-EOF
-
-# PackageKit likes to play games. Let's fix that.
-rm -f /var/lib/rpm/__db*
-releasever=$(rpm -q --qf '%{version}\n' --whatprovides system-release)
-basearch=$(uname -i)
-rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
-echo "Packages within this LiveCD"
-rpm -qa
-# Note that running rpm recreates the rpm db files which aren't needed or wanted
-rm -f /var/lib/rpm/__db*
-
-# go ahead and pre-make the man -k cache (#455968)
-/usr/bin/mandb
-
-# make sure there aren't core files lying around
-rm -f /core*
-
-# remove random seed, the newly installed instance should make it's own
-rm -f /var/lib/systemd/random-seed
-
-# convince readahead not to collect
-# FIXME: for systemd
-
-echo 'File created by kickstart. See systemd-update-done.service(8).' \
-    | tee /etc/.updated >/var/.updated
-
-# Drop the rescue kernel and initramfs, we don't need them on the live media itself.
-# See bug 1317709
-rm -f /boot/*-rescue*
-
-# Disable network service here, as doing it in the services line
-# fails due to RHBZ #1369794 - the error is expected
-/sbin/chkconfig network off
-
-# Remove machine-id on generated images
-rm -f /etc/machine-id
-touch /etc/machine-id
-
-%end
-
-
-%post --nochroot
-cp $INSTALL_ROOT/usr/share/licenses/*-release/* $LIVE_ROOT/
-
-# only works on x86_64
-if [ "$(uname -i)" = "i386" -o "$(uname -i)" = "x86_64" ]; then
-    # For livecd-creator builds
-    if [ ! -d $LIVE_ROOT/LiveOS ]; then mkdir -p $LIVE_ROOT/LiveOS ; fi
-    cp /usr/bin/livecd-iso-to-disk $LIVE_ROOT/LiveOS
-
-    # For lorax/livemedia-creator builds
-    sed -i '
-    /## make boot.iso/ i\
-    # Add livecd-iso-to-disk script to .iso filesystem at /LiveOS/\
-    <% f = "usr/bin/livecd-iso-to-disk" %>\
-    %if exists(f):\
-        install ${f} ${LIVEDIR}/${f|basename}\
-    %endif\
-    ' /usr/share/lorax/templates.d/99-generic/live/x86.tmpl
-fi
-
-%end

live/9/ppc64le/stage/rocky-live-base.ks

@@ -1,370 +0,0 @@
-# rocky-live-base.ks
-#
-# Base installation information for Rocky Linux images
-#
-
-lang en_US.UTF-8
-keyboard us
-timezone US/Eastern
-selinux --enforcing
-firewall --enabled --service=mdns
-xconfig --startxonboot
-zerombr
-clearpart --all
-part / --size 5120 --fstype ext4
-services --enabled=NetworkManager,ModemManager --disabled=sshd
-network --bootproto=dhcp --device=link --activate
-rootpw --lock --iscrypted locked
-shutdown
-
-%include rocky-repo.ks
-
-%packages
-@base-x
-@guest-desktop-agents
-@standard
-@core
-@fonts
-@input-methods
-@dial-up
-@multimedia
-@hardware-support
-
-# explicit
-kernel
-kernel-modules
-kernel-modules-extra
-anaconda
-anaconda-install-env-deps
-anaconda-live
-@anaconda-tools
-efi-filesystem
-grub2-common
-grub2-ppc64le
-grub2-ppc64le-modules
-grub2-tools
-grub2-tools-extra
-grub2-tools-minimal
-grubby
-librtas
-libservicelog
-libvpd
-lsvpd
-opal-prd
-ppc64-diag
-ppc64-diag-rtas
-powerpc-utils
-powerpc-utils-core
--shim-unsigned-*64
-
-# Required for SVG rnotes images
-aajohan-comfortaa-fonts
-
-# RHBZ#1242586 - Required for initramfs creation
-dracut-live
-
-# Anaconda needs all the locales available, just like a DVD installer
-glibc-all-langpacks
-
-# This isn't in @core anymore, but livesys still needs it
-initscripts
-chkconfig
-%end
-
-%post
-# FIXME: it'd be better to get this installed from a package
-cat > /etc/rc.d/init.d/livesys << EOF
-#!/bin/bash
-#
-# live: Init script for live image
-#
-# chkconfig: 345 00 99
-# description: Init script for live image.
-### BEGIN INIT INFO
-# X-Start-Before: display-manager chronyd
-### END INIT INFO
-
-. /etc/init.d/functions
-
-if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ]; then
-    exit 0
-fi
-
-if [ -e /.liveimg-configured ] ; then
-    configdone=1
-fi
-
-exists() {
-    which \$1 >/dev/null 2>&1 || return
-    \$*
-}
-
-livedir="LiveOS"
-for arg in \`cat /proc/cmdline\` ; do
-  if [ "\${arg##rd.live.dir=}" != "\${arg}" ]; then
-    livedir=\${arg##rd.live.dir=}
-    continue
-  fi
-  if [ "\${arg##live_dir=}" != "\${arg}" ]; then
-    livedir=\${arg##live_dir=}
-  fi
-done
-
-# Enable swap unless requested otherwise
-swaps=\`blkid -t TYPE=swap -o device\`
-if ! strstr "\`cat /proc/cmdline\`" noswap && [ -n "\$swaps" ] ; then
-  for s in \$swaps ; do
-    action "Enabling swap partition \$s" swapon \$s
-  done
-fi
-if ! strstr "\`cat /proc/cmdline\`" noswap && [ -f /run/initramfs/live/\${livedir}/swap.img ] ; then
-  action "Enabling swap file" swapon /run/initramfs/live/\${livedir}/swap.img
-fi
-
-# Support for persistent homes
-mountPersistentHome() {
-  # support label/uuid
-  if [ "\${homedev##LABEL=}" != "\${homedev}" -o "\${homedev##UUID=}" != "\${homedev}" ]; then
-    homedev=\`/sbin/blkid -o device -t "\$homedev"\`
-  fi
-
-  # if we're given a file rather than a blockdev, loopback it
-  if [ "\${homedev##mtd}" != "\${homedev}" ]; then
-    # mtd devs don't have a block device but get magic-mounted with -t jffs2
-    mountopts="-t jffs2"
-  elif [ ! -b "\$homedev" ]; then
-    loopdev=\`losetup -f\`
-    if [ "\${homedev##/run/initramfs/live}" != "\${homedev}" ]; then
-      action "Remounting live store r/w" mount -o remount,rw /run/initramfs/live
-    fi
-    losetup \$loopdev \$homedev
-    homedev=\$loopdev
-  fi
-
-  # if it's encrypted, we need to unlock it
-  if [ "\$(/sbin/blkid -s TYPE -o value \$homedev 2>/dev/null)" = "crypto_LUKS" ]; then
-    echo
-    echo "Setting up encrypted /home device"
-    plymouth ask-for-password --command="cryptsetup luksOpen \$homedev EncHome"
-    homedev=/dev/mapper/EncHome
-  fi
-
-  # and finally do the mount
-  mount \$mountopts \$homedev /home
-  # if we have /home under what's passed for persistent home, then
-  # we should make that the real /home.  useful for mtd device on olpc
-  if [ -d /home/home ]; then mount --bind /home/home /home ; fi
-  [ -x /sbin/restorecon ] && /sbin/restorecon /home
-  if [ -d /home/liveuser ]; then USERADDARGS="-M" ; fi
-}
-
-# Help locate persistent homes
-findPersistentHome() {
-  for arg in \`cat /proc/cmdline\` ; do
-    if [ "\${arg##persistenthome=}" != "\${arg}" ]; then
-      homedev=\${arg##persistenthome=}
-    fi
-  done
-}
-
-if strstr "\`cat /proc/cmdline\`" persistenthome= ; then
-  findPersistentHome
-elif [ -e /run/initramfs/live/\${livedir}/home.img ]; then
-  homedev=/run/initramfs/live/\${livedir}/home.img
-fi
-
-# Mount the persistent home if it's available
-if ! strstr "\`cat /proc/cmdline\`" nopersistenthome && [ -n "\$homedev" ] ; then
-  action "Mounting persistent /home" mountPersistentHome
-fi
-
-if [ -n "\$configdone" ]; then
-  exit 0
-fi
-
-# Create the liveuser (no password) so automatic logins and sudo works
-action "Adding live user" useradd \$USERADDARGS -c "Live System User" liveuser
-passwd -d liveuser > /dev/null
-usermod -aG wheel liveuser > /dev/null
-
-# Same for root
-passwd -d root > /dev/null
-
-# Turn off firstboot (similar to a DVD/minimal install, where it asks
-# for the user to accept the EULA before bringing up a TTY)
-systemctl --no-reload disable firstboot-text.service 2> /dev/null || :
-systemctl --no-reload disable firstboot-graphical.service 2> /dev/null || :
-systemctl stop firstboot-text.service 2> /dev/null || :
-systemctl stop firstboot-graphical.service 2> /dev/null || :
-
-# Prelinking damages the images
-sed -i 's/PRELINKING=yes/PRELINKING=no/' /etc/sysconfig/prelink &>/dev/null || :
-
-# Turn off mdmonitor by default
-systemctl --no-reload disable mdmonitor.service 2> /dev/null || :
-systemctl --no-reload disable mdmonitor-takeover.service 2> /dev/null || :
-systemctl stop mdmonitor.service 2> /dev/null || :
-systemctl stop mdmonitor-takeover.service 2> /dev/null || :
-
-# Even if there isn't gnome, this doesn't hurt.
-gsettings set org.gnome.software download-updates 'false' || :
-
-# Disable cron
-systemctl --no-reload disable crond.service 2> /dev/null || :
-systemctl --no-reload disable atd.service 2> /dev/null || :
-systemctl stop crond.service 2> /dev/null || :
-systemctl stop atd.service 2> /dev/null || :
-
-# Disable abrt
-systemctl --no-reload disable abrtd.service 2> /dev/null || :
-systemctl stop abrtd.service 2> /dev/null || :
-
-# Don't sync the system clock when running live (RHBZ #1018162)
-sed -i 's/rtcsync//' /etc/chrony.conf
-
-# Mark things as configured
-touch /.liveimg-configured
-
-# add static hostname to work around xauth bug
-# https://bugzilla.redhat.com/show_bug.cgi?id=679486
-# the hostname must be something else than 'localhost'
-# https://bugzilla.redhat.com/show_bug.cgi?id=1370222
-echo "localhost-live" > /etc/hostname
-
-EOF
-
-# HAL likes to start late.
-cat > /etc/rc.d/init.d/livesys-late << EOF
-#!/bin/bash
-#
-# live: Late init script for live image
-#
-# chkconfig: 345 99 01
-# description: Late init script for live image.
-
-. /etc/init.d/functions
-
-if ! strstr "\`cat /proc/cmdline\`" rd.live.image || [ "\$1" != "start" ] || [ -e /.liveimg-late-configured ] ; then
-    exit 0
-fi
-
-exists() {
-    which \$1 >/dev/null 2>&1 || return
-    \$*
-}
-
-touch /.liveimg-late-configured
-
-# Read some stuff out of the kernel cmdline
-for o in \`cat /proc/cmdline\` ; do
-    case \$o in
-    ks=*)
-        ks="--kickstart=\${o#ks=}"
-        ;;
-    xdriver=*)
-        xdriver="\${o#xdriver=}"
-        ;;
-    esac
-done
-
-# If liveinst or textinst is given, start installer
-if strstr "\`cat /proc/cmdline\`" liveinst ; then
-   plymouth --quit
-   /usr/sbin/liveinst \$ks
-fi
-if strstr "\`cat /proc/cmdline\`" textinst ; then
-   plymouth --quit
-   /usr/sbin/liveinst --text \$ks
-fi
-
-# Configure X, allowing user to override xdriver
-if [ -n "\$xdriver" ]; then
-   cat > /etc/X11/xorg.conf.d/00-xdriver.conf <<FOE
-Section "Device"
-	Identifier	"Videocard0"
-	Driver	"\$xdriver"
-EndSection
-FOE
-fi
-
-EOF
-
-chmod 755 /etc/rc.d/init.d/livesys
-/sbin/restorecon /etc/rc.d/init.d/livesys
-/sbin/chkconfig --add livesys
-
-chmod 755 /etc/rc.d/init.d/livesys-late
-/sbin/restorecon /etc/rc.d/init.d/livesys-late
-/sbin/chkconfig --add livesys-late
-
-# Enable tmpfs for /tmp - this is a good idea
-systemctl enable tmp.mount
-
-# make it so that we don't do writing to the overlay for things which
-# are just tmpdirs/caches
-# note https://bugzilla.redhat.com/show_bug.cgi?id=1135475
-cat >> /etc/fstab << EOF
-vartmp   /var/tmp    tmpfs   defaults   0  0
-EOF
-
-# PackageKit likes to play games. Let's fix that.
-rm -f /var/lib/rpm/__db*
-releasever=$(rpm -q --qf '%{version}\n' --whatprovides system-release)
-basearch=$(uname -i)
-rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-rockyofficial
-echo "Packages within this LiveCD"
-rpm -qa
-# Note that running rpm recreates the rpm db files which aren't needed or wanted
-rm -f /var/lib/rpm/__db*
-
-# go ahead and pre-make the man -k cache (#455968)
-/usr/bin/mandb
-
-# make sure there aren't core files lying around
-rm -f /core*
-
-# remove random seed, the newly installed instance should make it's own
-rm -f /var/lib/systemd/random-seed
-
-# convince readahead not to collect
-# FIXME: for systemd
-
-echo 'File created by kickstart. See systemd-update-done.service(8).' \
-    | tee /etc/.updated >/var/.updated
-
-# Drop the rescue kernel and initramfs, we don't need them on the live media itself.
-# See bug 1317709
-rm -f /boot/*-rescue*
-
-# Disable network service here, as doing it in the services line
-# fails due to RHBZ #1369794 - the error is expected
-/sbin/chkconfig network off
-
-# Remove machine-id on generated images
-rm -f /etc/machine-id
-touch /etc/machine-id
-
-%end
-
-
-%post --nochroot
-cp $INSTALL_ROOT/usr/share/licenses/*-release/* $LIVE_ROOT/
-
-# This only works on x86_64
-if [ "$(uname -i)" = "i386" -o "$(uname -i)" = "x86_64" ]; then
-    # For livecd-creator builds
-    if [ ! -d $LIVE_ROOT/LiveOS ]; then mkdir -p $LIVE_ROOT/LiveOS ; fi
-    cp /usr/bin/livecd-iso-to-disk $LIVE_ROOT/LiveOS
-
-    # For lorax/livemedia-creator builds
-    sed -i '
-    /## make boot.iso/ i\
-    # Add livecd-iso-to-disk script to .iso filesystem at /LiveOS/\
-    <% f = "usr/bin/livecd-iso-to-disk" %>\
-    %if exists(f):\
-        install ${f} ${LIVEDIR}/${f|basename}\
-    %endif\
-    ' /usr/share/lorax/templates.d/99-generic/live/x86.tmpl
-fi
-
-%end

live/9/ppc64le/stage/rocky-live-cinnamon-common.ks

@@ -1,77 +0,0 @@
-# cinnamon
-%packages
-rocky-backgrounds
-thunderbird
-firefox
-f36-backgrounds-gnome
-f36-backgrounds-extras-gnome
-f37-backgrounds-gnome
-f37-backgrounds-extras-gnome
-
-NetworkManager-adsl
-NetworkManager-bluetooth
-NetworkManager-l2tp-gnome
-NetworkManager-libreswan-gnome
-NetworkManager-openconnect-gnome
-NetworkManager-openvpn-gnome
-NetworkManager-ppp
-NetworkManager-pptp-gnome
-NetworkManager-wifi
-NetworkManager-wwan
-cinnamon
-cinnamon-control-center
-cinnamon-screensaver
-eom
-firewall-config
-gnome-calculator
-gnome-disk-utility
-gnome-screenshot
-gnome-system-monitor
-gnome-terminal
-gstreamer1-plugins-ugly-free
-gvfs-gphoto2
-gvfs-mtp
-gvfs-smb
-hexchat
-imsettings-systemd
-initial-setup-gui
-lightdm
-metacity
-nemo-fileroller
-nemo-image-converter
-nemo-preview
-nm-connection-editor
-pipewire-alsa
-pipewire-pulseaudio
-powerline
-redshift-gtk
-sane-backends-drivers-scanners
-setroubleshoot
-slick-greeter
-slick-greeter-cinnamon
-tmux
-tmux-powerline
-transmission
-vim-enhanced
-vim-powerline
-xdg-user-dirs-gtk
-xed
-xreader
-wireplumber
-
-parole
-#audacious
-#rhythmbox
-
-libreoffice-calc
-libreoffice-emailmerge
-libreoffice-graphicfilter
-libreoffice-impress
-libreoffice-writer
-
--xsane
--xane-gimp
--mpage
--hplip
--isdn4k-utils
-%end

live/9/ppc64le/stage/rocky-live-cinnamon.ks

@@ -1,64 +0,0 @@
-# rocky-live-cinnamon.ks
-
-%include rocky-live-base-spin.ks
-%include rocky-live-cinnamon-common.ks
-
-part / --size 8192
-
-%post
-# cinnamon configuration
-
-cat > /etc/sysconfig/desktop <<EOF
-PREFERRED=/usr/bin/cinnamon-session
-DISPLAYMANAGER=/usr/sbin/lightdm
-EOF
-
-cat >> /etc/rc.d/init.d/livesys << EOF
-# make the installer show up
-if [ -f /usr/share/applications/liveinst.desktop  ]; then
-  # Show harddisk install in shell dash
-  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
-fi
-mkdir /home/liveuser/Desktop
-cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
-chmod +x /home/liveuser/Desktop/liveinst.desktop
-
-# move to anaconda
-mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
-
-if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop  ]; then
-  mkdir -p ~liveuser/.config/autostart
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
-fi
-
-# set up lightdm autologin
-sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
-sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
-sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
-
-# set cinnamon as default session, otherwise login will fail
-sed -i 's/^#user-session=.*/user-session=cinnamon/' /etc/lightdm/lightdm.conf
-
-# Turn off PackageKit-command-not-found while uninstalled
-if [ -f /etc/PackageKit/CommandNotFound.conf  ]; then
-  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
-fi
-
-# The updater applet might or might not exist
-rm -f /etc/xdg/autostart/org.mageia.dnfdragora-updater.desktop
-
-# reset selinux contexts
-chown -R liveuser:liveuser /home/liveuser/
-restorecon -R /home/liveuser/
-restorecon -R /
-
-EOF
-
-# this doesn't come up automatically. not sure why.
-systemctl enable --force lightdm.service
-
-# CRB needs to be enabled for EPEL to function.
-dnf config-manager --set-enabled crb
-
-%end

live/9/ppc64le/stage/rocky-live-kde-base.ks

@@ -1,110 +0,0 @@
-# Maintained by RelEng
-
-%include rocky-live-base-spin.ks
-%include rocky-live-kde-common.ks
-
-%post
-
-# set default GTK+ theme for root (see #683855, #689070, #808062)
-cat > /root/.gtkrc-2.0 << EOF
-include "/usr/share/themes/Adwaita/gtk-2.0/gtkrc"
-include "/etc/gtk-2.0/gtkrc"
-gtk-theme-name="Adwaita"
-EOF
-mkdir -p /root/.config/gtk-3.0
-cat > /root/.config/gtk-3.0/settings.ini << EOF
-[Settings]
-gtk-theme-name = Adwaita
-EOF
-
-# add initscript
-cat >> /etc/rc.d/init.d/livesys << EOF
-
-# are we *not* able to use wayland sessions?
-if strstr "\`cat /proc/cmdline\`" nomodeset ; then
-PLASMA_SESSION_FILE="plasmax11.desktop"
-else
-PLASMA_SESSION_FILE="plasma.desktop"
-fi
-
-# set up autologin for user liveuser
-if [ -f /etc/sddm.conf ]; then
-sed -i 's/^#User=.*/User=liveuser/' /etc/sddm.conf
-sed -i "s/^#Session=.*/Session=\${PLASMA_SESSION_FILE}/" /etc/sddm.conf
-else
-cat > /etc/sddm.conf << SDDM_EOF
-[Autologin]
-User=liveuser
-Session=\${PLASMA_SESSION_FILE}
-SDDM_EOF
-fi
-
-# add liveinst.desktop to favorites menu
-mkdir -p /home/liveuser/.config/
-cat > /home/liveuser/.config/kickoffrc << MENU_EOF
-[Favorites]
-FavoriteURLs=/usr/share/applications/firefox.desktop,/usr/share/applications/org.kde.dolphin.desktop,/usr/share/applications/systemsettings.desktop,/usr/share/applications/org.kde.konsole.desktop,/usr/share/applications/liveinst.desktop
-MENU_EOF
-
-# show liveinst.desktop on desktop and in menu
-sed -i 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop
-# set executable bit disable KDE security warning
-chmod +x /usr/share/applications/liveinst.desktop
-mkdir /home/liveuser/Desktop
-cp -a /usr/share/applications/liveinst.desktop /home/liveuser/Desktop/
-
-if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop   ]; then
-  mkdir -p ~liveuser/.config/autostart
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
-fi
-
-# Set akonadi backend
-mkdir -p /home/liveuser/.config/akonadi
-cat > /home/liveuser/.config/akonadi/akonadiserverrc << AKONADI_EOF
-[%General]
-Driver=QSQLITE3
-AKONADI_EOF
-
-# "Disable plasma-discover-notifier"
-mkdir -p /home/liveuser/.config/autostart
-cp -a /etc/xdg/autostart/org.kde.discover.notifier.desktop /home/liveuser/.config/autostart/
-echo 'Hidden=true' >> /home/liveuser/.config/autostart/org.kde.discover.notifier.desktop
-
-# Disable baloo
-cat > /home/liveuser/.config/baloofilerc << BALOO_EOF
-[Basic Settings]
-Indexing-Enabled=false
-BALOO_EOF
-
-# Disable kres-migrator
-cat > /home/liveuser/.kde/share/config/kres-migratorrc << KRES_EOF
-[Migration]
-Enabled=false
-KRES_EOF
-
-# Disable kwallet migrator
-cat > /home/liveuser/.config/kwalletrc << KWALLET_EOL
-[Migration]
-alreadyMigrated=true
-KWALLET_EOL
-# Disable automount of 'known' devices
-# https://bugzilla.redhat.com/show_bug.cgi?id=2073708
-cat > /home/liveuser/.config/kded_device_automounterrc << AUTOMOUNTER_EOF
-[General]
-AutomountEnabled=false
-AutomountOnLogin=false
-AutomountOnPlugin=false
-AUTOMOUNTER_EOF
-
-# make sure to set the right permissions and selinux contexts
-chown -R liveuser:liveuser /home/liveuser/
-restorecon -R /home/liveuser/
-restorecon -R /
-
-EOF
-
-systemctl enable --force sddm.service
-dnf config-manager --set-enabled crb
-
-%end

live/9/ppc64le/stage/rocky-live-kde-common.ks

@@ -1,79 +0,0 @@
-
-%packages
-# install env-group to resolve RhBug:1891500
-@^kde-desktop-environment
-
-@firefox
-@kde-apps
-@kde-media
-
-# Libreoffice
-libreoffice-calc
-libreoffice-emailmerge
-libreoffice-graphicfilter
-libreoffice-impress
-libreoffice-writer
-
--@admin-tools
-
-### The KDE-Desktop
-
-### fixes
-sddm
-sddm-breeze
-sddm-themes
-sddm-kcm
-
-# use kde-print-manager instead of system-config-printer
--system-config-printer
-# make sure mariadb lands instead of MySQL (hopefully a temporary hack)
-mariadb-embedded
-mariadb-connector-c
-mariadb-server
-
-# minimal localization support - allows installing the kde-l10n-* packages
-#kde-l10n <- Not in EL8
-
-# unwanted packages from @kde-desktop
-# don't include these for now to fit on a cd
--desktop-backgrounds-basic
--kdeaccessibility*
--ktorrent			# kget has also basic torrent features (~3 megs)
--digikam			# digikam has duplicate functionality with gwenview (~28 megs)
--kipi-plugins			# ~8 megs + drags in Marble
--krusader			# ~4 megs
--k3b				# ~15 megs
-
-#-kdeplasma-addons		# ~16 megs
-
-# Additional packages that are not default in kde-* groups, but useful
-#kdeartwork			# only include some parts of kdeartwork
-fuse
-#mediawriter <-- Not in EL8
-
-### space issues
-
-# admin-tools
--gnome-disk-utility
-# kcm_clock still lacks some features, so keep system-config-date around
-#-system-config-date
-# prefer kcm_systemd
--system-config-services
-# prefer/use kusers
--system-config-users
-
-# we need to keep epel-release, otherwise we can't update
-epel-release
-
-### MINIMIZATION ###
--mpage
--hplip
--isdn4k-utils
--xsane
--xsane-gimp
--@input-methods
--scim*
--iok
-
-%end
-

live/9/ppc64le/stage/rocky-live-kde-minimization.ks

@@ -1,6 +0,0 @@
-# Remove a few things we don't need
-%packages
--@input-methods
--scim*
--iok
-%end

live/9/ppc64le/stage/rocky-live-kde.ks

@@ -1,9 +0,0 @@
-# rocky-live-kde.ks
-
-%include rocky-live-kde-base.ks
-
-# DVD
-part / --size=7300
-
-%post
-%end

live/9/ppc64le/stage/rocky-live-mate-common.ks

@@ -1,137 +0,0 @@
-# mate
-%packages
-rocky-backgrounds
-thunderbird
-firefox
-f36-backgrounds-mate
-f36-backgrounds-extras-mate
-f37-backgrounds-mate
-f37-backgrounds-extras-mate
-
-NetworkManager-adsl
-NetworkManager-bluetooth
-NetworkManager-l2tp-gnome
-NetworkManager-libreswan-gnome
-NetworkManager-openconnect-gnome
-NetworkManager-openvpn-gnome
-NetworkManager-ovs
-NetworkManager-ppp
-NetworkManager-pptp-gnome
-NetworkManager-team
-NetworkManager-wifi
-NetworkManager-wwan
-atril
-atril-caja
-atril-thumbnailer
-caja
-caja-actions
-dconf-editor
-engrampa
-eom
-filezilla
-firewall-config
-gnome-disk-utility
-gnome-epub-thumbnailer
-gnome-logs
-gnome-themes-extra
-gparted
-gstreamer1-plugins-ugly-free
-gtk2-engines
-gucharmap
-gvfs-fuse
-gvfs-gphoto2
-gvfs-mtp
-gvfs-smb
-hexchat
-initial-setup-gui
-libmatekbd
-libmatemixer
-libmateweather
-libsecret
-lightdm
-lm_sensors
-marco
-mate-applets
-mate-backgrounds
-mate-calc
-mate-control-center
-mate-desktop
-mate-dictionary
-mate-disk-usage-analyzer
-mate-icon-theme
-mate-media
-mate-menus
-mate-menus-preferences-category-menu
-mate-notification-daemon
-mate-panel
-mate-polkit
-mate-power-manager
-mate-screensaver
-mate-screenshot
-mate-search-tool
-mate-session-manager
-mate-settings-daemon
-mate-system-log
-mate-system-monitor
-mate-terminal
-mate-themes
-mate-user-admin
-mate-user-guide
-mozo
-network-manager-applet
-nm-connection-editor
-orca
-p7zip
-p7zip-plugins
-parole
-pavucontrol
-pipewire-alsa
-pipewire-pulseaudio
-pluma
-seahorse
-seahorse-caja
-setroubleshoot
-slick-greeter-mate
-usermode-gtk
-vim-enhanced
-wireplumber
-xdg-user-dirs-gtk
-xmodmap
-xrdb
-yelp
-
-firewall-applet
-mate-menu
-mate-sensors-applet
-mate-utils
-pluma-plugins
-tigervnc
-
-libreoffice-calc
-libreoffice-emailmerge
-libreoffice-graphicfilter
-libreoffice-impress
-libreoffice-writer
-
--@3d-printing
--@admin-tools
--brasero
--fedora-icon-theme
--gnome-icon-theme
--gnome-icon-theme-symbolic
--gnome-logs
--gnome-software
--gnome-user-docs
--gnome-user-docs
--evolution-help
--telnet
--audacious
--systemd-oomd-defaults
-
--xsane
--xane-gimp
--sane-backends
--mpage
--hplip
--isdn4k-utils
-%end

live/9/ppc64le/stage/rocky-live-mate.ks

@@ -1,63 +0,0 @@
-# rocky-live-kde.ks
-# BROKEN
-
-%include rocky-live-base-spin.ks
-%include rocky-live-mate-common.ks
-
-part / --size 7168
-
-%post
-# mate configuration
-
-cat >> /etc/rc.d/init.d/livesys << EOF
-# make the installer show up
-if [ -f /usr/share/applications/liveinst.desktop  ]; then
-  # Show harddisk install in shell dash
-  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
-fi
-mkdir /home/liveuser/Desktop
-cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop
-chmod +x /home/liveuser/Desktop/liveinst.desktop
-
-# move to anaconda - probably not required for MATE.
-mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
-
-if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop  ]; then
-  mkdir -p ~liveuser/.config/autostart
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
-fi
-
-# rebuild schema cache with any overrides we installed
-glib-compile-schemas /usr/share/glib-2.0/schemas
-
-# set up lightdm autologin
-sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
-sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
-sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
-
-# set MATE as default session, otherwise login will fail
-sed -i 's/^#user-session=.*/user-session=mate/' /etc/lightdm/lightdm.conf
-
-# Turn off PackageKit-command-not-found while uninstalled
-if [ -f /etc/PackageKit/CommandNotFound.conf  ]; then
-  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
-fi
-
-# The updater applet might or might not exist
-rm -f /etc/xdg/autostart/org.mageia.dnfdragora-updater.desktop
-
-# reset selinux contexts
-chown -R liveuser:liveuser /home/liveuser/
-restorecon -R /home/liveuser/
-restorecon -R /
-
-EOF
-
-# this doesn't come up automatically. not sure why.
-systemctl enable --force lightdm.service
-
-# CRB needs to be enabled for EPEL to function.
-dnf config-manager --set-enabled crb
-
-%end

live/9/ppc64le/stage/rocky-live-minimization.ks

@@ -1,14 +0,0 @@
-# Saving space
-%packages
-
-# save some space
--mpage
--hplip
--isdn4k-utils
-
-# scanning takes quite a bit of space :/
--xsane
--xsane-gimp
--sane-backends
-
-%end

live/9/ppc64le/stage/rocky-live-workstation-lite.ks

@@ -1,101 +0,0 @@
-# Maintained by Release Engineering
-# mailto:releng@rockylinux.org
-
-%include rocky-live-base.ks
-%include rocky-workstation-common-lite.ks
-#
-# Disable this for now as packagekit is causing compose failures
-# by leaving a gpg-agent around holding /dev/null open.
-#
-#include snippets/packagekit-cached-metadata.ks
-
-part / --size 7750
-
-%post
-
-cat >> /etc/rc.d/init.d/livesys << EOF
-
-
-# disable gnome-software automatically downloading updates
-cat >> /usr/share/glib-2.0/schemas/org.gnome.software.gschema.override << FOE
-[org.gnome.software]
-download-updates=false
-FOE
-
-# don't autostart gnome-software session service
-rm -f /etc/xdg/autostart/gnome-software-service.desktop
-
-# disable the gnome-software shell search provider
-cat >> /usr/share/gnome-shell/search-providers/org.gnome.Software-search-provider.ini << FOE
-DefaultDisabled=true
-FOE
-
-# don't run gnome-initial-setup
-mkdir ~liveuser/.config
-touch ~liveuser/.config/gnome-initial-setup-done
-
-# suppress anaconda spokes redundant with gnome-initial-setup
-cat >> /etc/sysconfig/anaconda << FOE
-[NetworkSpoke]
-visited=1
-
-[PasswordSpoke]
-visited=1
-
-[UserSpoke]
-visited=1
-FOE
-
-# make the installer show up
-if [ -f /usr/share/applications/liveinst.desktop ]; then
-  # Show harddisk install in shell dash
-  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
-  # need to move it to anaconda.desktop to make shell happy
-  mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
-
-  cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
-[org.gnome.shell]
-favorite-apps=['firefox.desktop', 'evolution.desktop', 'org.gnome.Nautilus.desktop', 'anaconda.desktop']
-FOE
-
-  # Make the welcome screen show up
-  if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop ]; then
-    mkdir -p ~liveuser/.config/autostart
-    cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
-    cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
-  fi
-
-  # Disable GNOME welcome tour so it doesn't overlap with Fedora welcome screen
-  cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
-welcome-dialog-last-shown-version='4294967295'
-FOE
-
-  # Copy Anaconda branding in place
-  if [ -d /usr/share/lorax/product/usr/share/anaconda ]; then
-    cp -a /usr/share/lorax/product/* /
-  fi
-fi
-
-# rebuild schema cache with any overrides we installed
-glib-compile-schemas /usr/share/glib-2.0/schemas
-
-# set up auto-login
-cat > /etc/gdm/custom.conf << FOE
-[daemon]
-AutomaticLoginEnable=True
-AutomaticLogin=liveuser
-FOE
-
-# Turn off PackageKit-command-not-found while uninstalled
-if [ -f /etc/PackageKit/CommandNotFound.conf ]; then
-  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
-fi
-
-# make sure to set the right permissions and selinux contexts
-chown -R liveuser:liveuser /home/liveuser/
-restorecon -R /home/liveuser/
-restorecon -R /
-
-EOF
-
-%end

live/9/ppc64le/stage/rocky-live-workstation.ks

@@ -1,102 +0,0 @@
-# Maintained by Release Engineering
-# mailto:releng@rockylinux.org
-
-%include rocky-live-base.ks
-%include rocky-workstation-common.ks
-#
-# Disable this for now as packagekit is causing compose failures
-# by leaving a gpg-agent around holding /dev/null open.
-#
-#include snippets/packagekit-cached-metadata.ks
-
-part / --size 7750
-
-%post
-
-cat >> /etc/rc.d/init.d/livesys << EOF
-
-
-# disable gnome-software automatically downloading updates
-cat >> /usr/share/glib-2.0/schemas/org.gnome.software.gschema.override << FOE
-[org.gnome.software]
-allow-updates=false
-download-updates=false
-FOE
-
-# don't autostart gnome-software session service
-rm -f /etc/xdg/autostart/gnome-software-service.desktop
-
-# disable the gnome-software shell search provider
-cat >> /usr/share/gnome-shell/search-providers/org.gnome.Software-search-provider.ini << FOE
-DefaultDisabled=true
-FOE
-
-# don't run gnome-initial-setup
-mkdir ~liveuser/.config
-touch ~liveuser/.config/gnome-initial-setup-done
-
-# suppress anaconda spokes redundant with gnome-initial-setup
-cat >> /etc/sysconfig/anaconda << FOE
-[NetworkSpoke]
-visited=1
-
-[PasswordSpoke]
-visited=1
-
-[UserSpoke]
-visited=1
-FOE
-
-# make the installer show up
-if [ -f /usr/share/applications/liveinst.desktop ]; then
-  # Show harddisk install in shell dash
-  sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop ""
-  # need to move it to anaconda.desktop to make shell happy
-  mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
-
-  cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
-[org.gnome.shell]
-favorite-apps=['firefox.desktop', 'evolution.desktop', 'org.gnome.Nautilus.desktop', 'anaconda.desktop']
-FOE
-
-  # Make the welcome screen show up
-  if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop ]; then
-    mkdir -p ~liveuser/.config/autostart
-    cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
-    cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
-  fi
-
-  # Disable GNOME welcome tour so it doesn't overlap with Fedora welcome screen
-  cat >> /usr/share/glib-2.0/schemas/org.gnome.shell.gschema.override << FOE
-welcome-dialog-last-shown-version='4294967295'
-FOE
-
-  # Copy Anaconda branding in place
-  if [ -d /usr/share/lorax/product/usr/share/anaconda ]; then
-    cp -a /usr/share/lorax/product/* /
-  fi
-fi
-
-# rebuild schema cache with any overrides we installed
-glib-compile-schemas /usr/share/glib-2.0/schemas
-
-# set up auto-login
-cat > /etc/gdm/custom.conf << FOE
-[daemon]
-AutomaticLoginEnable=True
-AutomaticLogin=liveuser
-FOE
-
-# Turn off PackageKit-command-not-found while uninstalled
-if [ -f /etc/PackageKit/CommandNotFound.conf ]; then
-  sed -i -e 's/^SoftwareSourceSearch=true/SoftwareSourceSearch=false/' /etc/PackageKit/CommandNotFound.conf
-fi
-
-# make sure to set the right permissions and selinux contexts
-chown -R liveuser:liveuser /home/liveuser/
-restorecon -R /home/liveuser/
-restorecon -R /
-
-EOF
-
-%end

live/9/ppc64le/stage/rocky-live-xfce-common.ks

@@ -1,92 +0,0 @@
-# xfce
-%packages
-
-# these aren't an epel thing for some reason.
-@xfce-desktop --nodefaults
-#@^xfce-desktop-environment
-#@xfce-apps
-#@xfce-extra-plugins
-#@xfce-media
-#@xfce-office
-
-# Manual install...
-#geany
-gparted
-#mousepad
-#ristretto
-seahorse
-#transmission
-pcp-selinux
-lightdm
-#gdm
--gdm
--gnome-shell
-
-# Some stuff might already be here, doesn't hurt to list it.
-firefox
-thunderbird
-firewall-config
-#pidgin
-rocky-backgrounds
-gparted
-#rhythmbox
-
-# extras
-f35-backgrounds-xfce
-f35-backgrounds-extras-xfce
-f36-backgrounds-xfce
-f36-backgrounds-extras-xfce
-f37-backgrounds-xfce
-f37-backgrounds-extras-xfce
-
-xfce4-about
-xfce4-taskmanager
-#xfce4-battery-plugin
-xfce4-datetime-plugin
-xfce4-netload-plugin
-#xfce4-places-plugin
-xfce4-screenshooter-plugin
-xfce4-smartbookmark-plugin
-xfce4-systemload-plugin
-xfce4-time-out-plugin
-xfce4-weather-plugin
-xfce4-whiskermenu-plugin
-#xfdashboard
-#xfdashboard-themes
-pavucontrol
-
-# XFCE group defaults
-xfce4-appfinder
-xfce4-power-manager
-#xfce4-pulseaudio-plugin
-xfce4-screensaver
-xfce4-terminal
-network-manager-applet
-openssh-askpass
-thunar-archive-plugin
-thunar-volman
-tumbler
-xfce-polkit
-
-wget
-xdg-user-dirs
-xdg-user-dirs-gtk
-
-# save some space
--autofs
--acpid
--gimp-help
--desktop-backgrounds-basic
--aspell-*
--xfce4-sensors-plugin
--xfce4-eyes-plugin
-
-### MINIMIZATION
--mpage
--hplip
--isdn4k-utils
--xsane
--xsane-gimp
--sane-backends
-
-%end

live/9/ppc64le/stage/rocky-live-xfce.ks

@@ -1,95 +0,0 @@
-# rocky-live-kde.ks
-# BROKEN
-
-%include rocky-live-base-spin.ks
-%include rocky-live-xfce-common.ks
-
-part / --size 6144
-
-%post
-# xfce configuration
-
-# create /etc/sysconfig/desktop (needed for installation)
-
-cat > /etc/sysconfig/desktop <<EOF
-PREFERRED=/usr/bin/startxfce4
-DISPLAYMANAGER=/usr/sbin/lightdm
-EOF
-
-cat >> /etc/rc.d/init.d/livesys << EOF
-
-mkdir -p /home/liveuser/.config/xfce4
-# ugly stuff, this should give us a default background for now
-#mkdir -p /usr/share/backgrounds/images
-#ln -s /usr/share/backgrounds/f32/default/f32.png \
-#  /usr/share/backgrounds/images/default.png
-
-cat > /home/liveuser/.config/xfce4/helpers.rc << FOE
-MailReader=sylpheed-claws
-FileManager=Thunar
-WebBrowser=firefox
-FOE
-
-# disable screensaver locking (#674410)
-cat >> /home/liveuser/.xscreensaver << FOE
-mode:           off
-lock:           False
-dpmsEnabled:    False
-FOE
-
-# deactivate xfconf-migration (#683161)
-rm -f /etc/xdg/autostart/xfconf-migration-4.6.desktop || :
-
-# deactivate xfce4-panel first-run dialog (#693569)
-mkdir -p /home/liveuser/.config/xfce4/xfconf/xfce-perchannel-xml
-cp /etc/xdg/xfce4/panel/default.xml /home/liveuser/.config/xfce4/xfconf/xfce-perchannel-xml/xfce4-panel.xml
-
-# set up lightdm autologin
-sed -i 's/^#autologin-user=.*/autologin-user=liveuser/' /etc/lightdm/lightdm.conf
-sed -i 's/^#autologin-user-timeout=.*/autologin-user-timeout=0/' /etc/lightdm/lightdm.conf
-sed -i 's/^#show-language-selector=.*/show-language-selector=true/' /etc/lightdm/lightdm-gtk-greeter.conf
-
-# set Xfce as default session, otherwise login will fail
-sed -i 's/^#user-session=.*/user-session=xfce/' /etc/lightdm/lightdm.conf
-
-# debrand
-#sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/fedora-welcome.desktop
-#sed -i "s/RHEL/Rocky Linux/g" /usr/share/anaconda/gnome/fedora-welcome
-#sed -i "s/Red Hat Enterprise/Rocky/g" /usr/share/anaconda/gnome/fedora-welcome
-#sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/anaconda/gnome/fedora-welcome
-#sed -i "s/org.fedoraproject.AnacondaInstaller/fedora-logo-icon/g" /usr/share/applications/liveinst.desktop
-
-# Show harddisk install on the desktop
-sed -i -e 's/NoDisplay=true/NoDisplay=false/' /usr/share/applications/liveinst.desktop
-mkdir /home/liveuser/Desktop
-cp /usr/share/applications/liveinst.desktop /home/liveuser/Desktop/
-
-if [ -f /usr/share/anaconda/gnome/fedora-welcome.desktop  ]; then
-  mkdir -p ~liveuser/.config/autostart
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop /usr/share/applications/
-  cp /usr/share/anaconda/gnome/fedora-welcome.desktop ~liveuser/.config/autostart/
-fi
-
-# no updater applet in live environment
-rm -f /etc/xdg/autostart/org.mageia.dnfdragora-updater.desktop
-
-# and mark it as executable (new Xfce security feature)
-chmod +x /home/liveuser/Desktop/liveinst.desktop
-
-# move to anaconda - probably not required for XFCE.
-mv /usr/share/applications/liveinst.desktop /usr/share/applications/anaconda.desktop
-
-# this goes at the end after all other changes. 
-chown -R liveuser:liveuser /home/liveuser
-restorecon -R /home/liveuser
-#restorecon -R /
-
-EOF
-
-# this doesn't come up automatically. not sure why.
-systemctl enable --force lightdm.service
-
-# CRB needs to be enabled for EPEL to function.
-dnf config-manager --set-enabled crb
-
-%end

live/9/ppc64le/stage/rocky-repo-epel.ks

@@ -1,14 +0,0 @@
-# These should change based on the major/minor release
-
-# Deps repo, there are some anaconda packages that are *not* available by default
-repo --name=BaseOS --cost=200 --baseurl=http://dl.rockylinux.org/stg/rocky/9/BaseOS/$basearch/os/
-repo --name=AppStream --cost=200 --baseurl=http://dl.rockylinux.org/stg/rocky/9/AppStream/$basearch/os/
-repo --name=CRB --cost=200 --baseurl=http://dl.rockylinux.org/stg/rocky/9/CRB/$basearch/os/
-repo --name=extras --cost=200 --baseurl=http://dl.rockylinux.org/stg/rocky/9/extras/$basearch/os
-
-# EPEL (required for KDE and XFCE)
-repo --name=epel --cost=200 --baseurl=https://dl.fedoraproject.org/pub/epel/9/Everything/$basearch/
-#repo --name=epel-modular --cost=200 --baseurl=https://dl.fedoraproject.org/pub/epel/8/Modular/$basearch/
-
-# URL to the base os repo
-url --url=http://dl.rockylinux.org/stg/rocky/9/BaseOS/$basearch/os/

live/9/ppc64le/stage/rocky-repo.ks

@@ -1,10 +0,0 @@
-# These should change based on the major/minor release
-
-# Base repos
-repo --name=BaseOS --cost=200 --baseurl=http://dl.rockylinux.org/stg/rocky/9/BaseOS/$basearch/os/
-repo --name=AppStream --cost=200 --baseurl=http://dl.rockylinux.org/stg/rocky/9/AppStream/$basearch/os/
-repo --name=CRB --cost=200 --baseurl=http://dl.rockylinux.org/stg/rocky/9/CRB/$basearch/os/
-repo --name=extras --cost=200 --baseurl=http://dl.rockylinux.org/stg/rocky/9/extras/$basearch/os
-
-# URL to the base os repo
-url --url=http://dl.rockylinux.org/stg/rocky/9/BaseOS/$basearch/os/

live/9/ppc64le/stage/rocky-workstation-common-lite.ks

@@ -1,27 +0,0 @@
-%packages
-
-# Exclude unwanted groups that rocky-live-base.ks pulls in
--@dial-up
--@input-methods
--@standard
-
-# Make sure to sync any additions / removals done here with
-# workstation-product-environment in comps
-@base-x
-@core
-@fonts
-@gnome-desktop
-@guest-desktop-agents
-@hardware-support
-@internet-browser
-@networkmanager-submodules
-
-# Libreoffice
-libreoffice-calc
-libreoffice-writer
-
-# Exclude unwanted packages from @anaconda-tools group
--gfs2-utils
--reiserfs-utils
-
-%end

live/9/ppc64le/stage/rocky-workstation-common.ks

@@ -1,32 +0,0 @@
-%packages
-
-# Exclude unwanted groups that rocky-live-base.ks pulls in
--@dial-up
--@input-methods
--@standard
-
-# Make sure to sync any additions / removals done here with
-# workstation-product-environment in comps
-@base-x
-@core
-@fonts
-@gnome-desktop
-@guest-desktop-agents
-@hardware-support
-@internet-browser
-@multimedia
-@networkmanager-submodules
-@workstation-product
-
-# Libreoffice
-libreoffice-calc
-libreoffice-emailmerge
-libreoffice-graphicfilter
-libreoffice-impress
-libreoffice-writer
-
-# Exclude unwanted packages from @anaconda-tools group
--gfs2-utils
--reiserfs-utils
-
-%end