diff --git a/centos2rocky.sh b/centos2rocky.sh
deleted file mode 100755
index 7077fcc..0000000
--- a/centos2rocky.sh
+++ /dev/null
@@ -1,296 +0,0 @@
-#!/usr/bin/env bash
-# label <label@rockylinux.org>
-# Supports only CentOS 8.3
-
-## Rocky is RC status. Using this script means you accept all risks of system instability.
-
-# Path to logfile
-logfile=/var/log/centos2rocky.log
-
-# Send all output to the logfile as well as stdout.
-truncate -s0 "$logfile"
-exec > >(tee -a "$logfile") 2> >(tee -a "$logfile" >&2)
-
-errcolor=$(tput setaf 1)
-nocolor=$(tput op)
-blue=$(tput setaf 4)
-
-set -e
-unset CDPATH
-
-if [[ "$(id -u)" -ne 0 ]]; then
-  printf '%s\n' "$errcolor" "You must run this script as root.$nocolor" \
-      "${errcolor}Either use sudo or 'su -c ${0}'$nocolor"
-fi
-
-if ! type curl >/dev/null 2>&1; then
-  printf '%s\n' "${blue}Curl is not installed! Installing it...$nocolor"
-  dnf -y install curl libcurl
-fi
-
-export LANG=en_US.UTF-8
-
-SUPPORTED_RELEASE="8.3"
-SUPPORTED_MAJOR="8"
-ARCH=$(arch)
-current_url="https://dl.rockylinux.org/pub/rocky/${SUPPORTED_RELEASE}/BaseOS/${ARCH}/os/Packages"
-# These are packages that can be swapped safely over and will have more added over time.
-packages_to_swap=(
-  centos-backgrounds \
-  centos-indexhtml \
-  centos-linux-repos \
-  centos-logos \
-  centos-gpg-keys \
-  centos-linux-release)
-
-packages_that_exist=($(rpm -q --queryformat="%{NAME}\n" "${packages_to_swap[@]}" | grep -v "not installed"))
-release_to_install=($(curl -L -s ${current_url} | awk -F '"' '/rocky-repos|rocky-gpg-keys|rocky-release/ {print $2}'))
-
-# Release packages that are part of SIG's should be listed below when they are available.
-#sigs_to_swap=()
-
-# Defaults
-list_enabled=("$(dnf repolist enabled | awk '!/repo/ {print $1}')")
-enabled_modules=("$(dnf module list --enabled | grep rhel | awk '{print $1}')")
-convert_info_dir=/root/convert
-reinstall_all_rpms=false
-verify_all_rpms=false
-
-usage() {
-  printf '%s\n' \
-      "Usage: ${0##*/} [OPTIONS]" \
-      '' \
-      'Options:' \
-      '-h displays this help' \
-      '-r Converts to rocky' \
-      '-V Verifies switch' \
-      '-R Reinstall all packages' \
-      '   !! USE WITH CAUTION !!'
-  exit 1
-} >&2
-
-exit_message() {
-  printf '%s\n' "$1"
-  final_message
-  exit 1
-} >&2
-
-final_message() {
-  printf '%s\n' "${errcolor}An error occurred while we were attempting to convert your system to Rocky Linux. Your system may be unstable. Script will now exit to prevent possible damage.$nocolor"
-  logmessage
-}
-
-logmessage(){
-  printf '%s\n' "${blue}A log of this installation can be found at $logfile$nocolor"
-}
-
-## The actual work
-bin_hash() {
-  hash "$1" >/dev/null 2>&1
-}
-
-bin_check() {
-  if ! bin_hash "$1"; then
-    exit_message "'${1}' command not found. Please ensure you are running bash or that your PATH is set correctly."
-    logmessage
-  fi
-}
-
-generate_rpm_info() {
-  mkdir /root/convert
-  printf '%s\n' "${blue}Creating a list of RPMs installed: $1$nocolor"
-  rpm -qa --qf "%{NAME}|%{VERSION}|%{RELEASE}|%{INSTALLTIME}|%{VENDOR}|%{BUILDTIME}|%{BUILDHOST}|%{SOURCERPM}|%{LICENSE}|%{PACKAGER}\n" | sort > "${convert_info_dir}/$(hostname)-rpm-list-$1.log"
-  printf '%s\n' "${blue}Verifying RPMs installed against RPM database: $1$nocolor" ''
-  rpm -Va | sort -k3 > "${convert_info_dir}/$(hostname)-rpm-list-verified-$1.log"
-}
-
-package_swaps() {
-  mkdir /root/release
-  pushd /root/release
-
-  for x in "${release_to_install[@]}"; do
-    curl -s "${current_url}/${x}" > "$x" || {
-      printf '%s\n' "${errcolor}failed to download ${x}$nocolor" '' &&
-      logmessage
-      exit 20
-    }
-  done
-
-  # Remove packages we need to swap
-  rpm -e --nodeps "${packages_that_exist[@]}"
-
-  # Install our release
-  rpm -ihv "${release_to_install[@]}"
-
-  # Distrosync if the above succeeded
-  if [[ $? -eq 0 ]]; then
-    printf '%s\n' "${blue}Removing dnf cache$nocolor"
-    rm -rf /var/cache/{yum,dnf}
-    printf '%s\n' "${blue}Ensuring repos are enabled before the package swap$nocolor"
-    dnf config-manager --set-enabled ${list_enabled[@]} || {
-      printf '%s\n' 'Repo name missing?'
-      exit 25
-    }
-    dnf distro-sync -y
-  else
-    exit_message "We failed to install the release package."
-    logmessage
-  fi
-
-  popd
-}
-
-sig_swaps() {
-  exit_message "Not Available"
-}
-
-grub_swap() {
-  if [ -d /sys/firmware/efi ]; then
-     grub2-mkconfig -o /boot/efi/EFI/rocky/grub.cfg
-  else
-     grub2-mkconfig -o /boot/grub2/grub.cfg
-  fi
-}
-
-module_check() {
-  printf '%s\n' "${blue}Finding our modules that are enabled$nocolor"
-  for module in "${enabled_modules[@]}"; do
-    case ${module} in
-      container-tools|go-toolset|jmc|llvm-toolset|rust-toolset|virt)
-        ;;
-      *)
-        unknown_modules+=("${module}")
-        ;;
-    esac
-  done
-  if [[ ${#unknown_modules[@]} -gt 0 ]]; then
-    printf '%s\n' "${unknown_modules[@]}" \
-	"${blue}There are some modules that are unsure of how to handle. This normally shouldn't happen. Do you want to resolve this yourself (Yes) or continue (No)?$nocolor"
-    select yn in "Yes" "No"; do
-      case $yn in
-        Yes)
-          printf '%s\n' "${errcolor}Unsure how to switch modules, so we are leaving.$nocolor"
-          logmessage
-          exit 1
-          ;;
-        No)
-          break
-          ;;
-      esac
-    done
-  fi
-}
-
-# This is just in case. There is a likelihood this will have to be done.
-module_fix() {
-  for module in "${enabled_modules[@]}"; do
-    dnf module reset -y "${module}"
-    case ${module} in
-      container-tools|go-toolset|jmc|llvm-toolset|rust-toolset|virt)
-        dnf module install "${module}" -y
-        ;;
-      *)
-        printf '%s\n' "${errcolor}Unsure how to deal with the module presented.$nocolor"
-        logmessage
-        ;;
-      esac
-    # Final update
-    dnf update -y
-  done
-}
-
-
-## End actual work
-
-while getopts "hrVR" option; do
-  case "$option" in
-    h)
-      usage
-      ;;
-    r)
-      reinstall_all_rpms=true
-      ;;
-    V)
-      verify_all_rpms=true
-      ;;
-    *)
-      printf '%s\n' "${errcolor}Invalid switch.$nocolor"
-      usage
-      ;;
-  esac
-done
-
-printf '%s\n' "${blue}Ensuring rpm and yum are here.$nocolor"
-for pkg in rpm yum curl; do
-  bin_check "${pkg}"
-done
-
-printf '%s\n' "${blue}Ensuring your version of CentOS is supported$nocolor"
-if ! old_release=$(rpm -q --whatprovides /etc/redhat-release); then
-  exit_message "You are not running a supported distribution."
-  logmessage
-fi
-
-if [ "$(echo "${old_release}" | wc -l)" -ne 1 ]; then
-  exit_message "You seem to have package issues. More than one package provides redhat-release."
-  logmessage
-fi
-
-if ! grep ${SUPPORTED_RELEASE} -q /etc/redhat-release; then
-  exit_message "${SUPPORTED_RELEASE} is only supported for conversion at this time. Stream is not supported."
-  logmessage
-fi
-
-if "${verify_all_rpms}"; then
-  generate_rpm_info begin
-fi
-
-case "${old_release}" in
-  centos-linux-release*);;
-  rocky-release*)
-    exit_message "You are already running Rocky."
-    logmessage
-    ;;
-  *)
-    exit_message "You are running an unsupported distribution. Good bye."
-    logmessage
-esac
-
-# Check our modules before a swap
-module_check
-
-# Actually do the swap and distro-sync
-package_swaps
-
-# Reconfigure grub
-grub_swap
-
-# Fix up modules
-module_fix
-
-# Warning, this is potentially dangerous.
-if "${reinstall_all_rpms}"; then
-  printf '%s\n' "${errcolor}!! THIS MAY CAUSE ISSUES WITH YOUR SYSTEM !!$nocolor"
-  rpm_list=("$(rpm -qa --qf "%{NAME}-%{VERSION}-%{RELEASE} %{VENDOR}\n" | grep CentOS | awk '{print $1}')")
-  if [[ -n "${rpm_list[*]}" ]]; then
-    printf '%s ' 'Reinstalling rpms:' "${rpm_list[@]}"
-    dnf reinstall "${rpm_list[@]}" -y
-  fi
-  non_rocky_rpm=("$(rpm -qa --qf "%{NAME}-%{VERSION}-%{RELEASE}|%{VENDOR}|%{PACKAGER}\n" |grep -iv Rocky)")
-  if [[ -n ${non_rocky_rpm[*]} ]]; then
-    printf '%s\n' "${blue}Non-Rocky packages are installed. This is generally not an issue. If you see centos packages, you may need to address them and file a bug report at https://bugs.rockylinux.org$nocolor"
-    printf '\t%s\n' "${non_rocky_rpm[@]}"
-  fi
-fi
-
-if "${verify_all_rpms}"; then
-  generate_rpm_info finish
-  printf '%s\n' "${blue}You may review the following files:$nocolor"
-  find /root/convert -type f -name "$(hostname)-rpms-*.log"
-fi
-
-
-printf '\n\n\n'
-cat /etc/issue | awk 'NR<=15'
-printf '%s\n' "$blue" "Done, please reboot your system.$nocolor"
-logmessage