2022-07-04 20:22:53 +00:00
(This file comes from the kickstart/appliance-creator repo: https://git.resf.org/sig_altarch/RockyRpi )
2021-06-26 23:40:24 +00:00
2023-06-09 17:32:02 +00:00
Rocky 9 Raspberry Pi Image version 9.2
2021-06-26 23:40:24 +00:00
2021-10-03 04:46:45 +00:00
They have been tested on Raspberry Pi 3 and 4.
2021-06-26 23:40:24 +00:00
Rocky Linux WILL NOT WORK on a Raspberry Pi 1 or 2. They are 32-bit only, and Rocky Linux only supports arm64 (aarch64).
2021-10-03 04:46:45 +00:00
(edit: Raspberry Pi 2 version 1.2 boards are in fact 64-bit. There aren't too many of these, but they might work. Tell us if you have one!)
2021-06-26 23:40:24 +00:00
QUICK START:
####################################################
Download the latest image, and write it to your raw microSD memory card (or other boot device).
2021-10-03 04:46:45 +00:00
GUI WAY (Linux/Win/Mac)
Grab a program like Balena Etcher ( https://www.balena.io/etcher/ ) GUI-based disk writer.
Insert your SD card and follow the instructions. It will extract and write your disk image.
COMMAND LINE WAY (assumes Linux system on a root (sudo su) shell):
xzcat Rocky_Image_file.raw.xz > /dev/sdX
(where X is the letter of your usb or memory card device, you can use fdisk -l to find which one)
BE CAREFUL, be sure which device you are writing to before you do it! Don't accidentally blow away your laptop/desktop hard drive!
2021-06-26 23:40:24 +00:00
Once your storage device is written to, you should be able to plug it in to a Raspberry Pi and boot!
Default username: rocky
Default password: rockylinux
2021-10-03 04:46:45 +00:00
Run "sudo rootfs-expand" to grow the partition and use all of your memory card or hard drive.
2021-06-26 23:40:24 +00:00
TECHNICAL DETAILS ABOUT THE IMAGES:
###################################################
2021-10-03 04:46:45 +00:00
- Minimal/base install, with some quality of life packages like vim,nano,bash-completion
- Additional Raspberry Pi repo and release package that has Rpi kernels/firmware from the excellent raspberrypi2 repo from upstream CentOS
- Script/fix for the wifi on rpi4 (linux-firmware bug)
- Default user "rocky" (member of wheel, can use sudo). Root password disabled by default
- Partition layout: 300 MB /boot , 512 MB swap, ~2800 MB rootfs. Able to fit on a 4 GB or larger sd card
- Everything else should be more or less a standard Rocky aarch64 installation
2021-06-26 23:40:24 +00:00
2021-10-03 04:46:45 +00:00
Thanks for your interest on Rocky-on-Rpi, feel free to share your experience or contribute in our chat channel at: https://chat.rockylinux.org/rocky-linux/channels/altarch !
2021-06-26 23:40:24 +00:00
2021-10-03 04:46:45 +00:00
-The Rocky Linux Team
2021-06-26 23:40:24 +00:00
2021-10-03 04:46:45 +00:00
Thanks for your interest in Rocky Linux on the Raspberry Pi!
