Merge "bootloader: remove extlinux/syslinux path"

This commit is contained in:
Zuul 2021-05-28 04:51:23 +00:00 committed by Gerrit Code Review
commit 75ee18b01b
4 changed files with 227 additions and 335 deletions

View File

@ -2,10 +2,7 @@
bootloader
==========
Installs ``grub[2]`` on boot partition on the system. In case GRUB2 is
not available in the system, a fallback to Extlinux will happen. It's
also possible to enforce the use of Extlinux by exporting a
``DIB_EXTLINUX`` variable to the environment.
Installs ``grub[2]`` on boot partition on the system.
Arguments
=========

View File

@ -1,55 +0,0 @@
#!/bin/bash
#
# Copyright 2014 Hewlett-Packard Development Company, L.P.
# All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.
# dib-lint: disable=safe_sudo
if [ ${DIB_DEBUG_TRACE:-1} -gt 0 ]; then
set -x
fi
set -eu
set -o pipefail
[ -n "$TARGET_ROOT" ]
source $_LIB/img-functions
if [ -d $TARGET_ROOT/boot/extlinux ] ; then
CONF=$TARGET_ROOT/boot/extlinux/extlinux.conf
elif [ -d $TARGET_ROOT/boot/syslinux ] ; then
CONF=$TARGET_ROOT/boot/syslinux/syslinux.cfg
else
exit 0
fi
# Dig up the initrd and kernel to use.
select_boot_kernel_initrd $TARGET_ROOT
# Serial console on Power is hvc0
if [[ "powerpc ppc64 ppc64le" =~ "$ARCH" ]] ; then
SERIAL_CONSOLE="hvc0"
else
SERIAL_CONSOLE="ttyS0,115200"
fi
sudo sh -c "cat > $CONF <<_EOF_
DEFAULT linux
LABEL linux
KERNEL /boot/$KERNEL
APPEND ro root=LABEL=${DIB_ROOT_LABEL} console=tty0 console=${SERIAL_CONSOLE} nofb nomodeset gfxpayload=text
INITRD /boot/$RAMDISK
_EOF_"

View File

@ -9,296 +9,241 @@ fi
set -eu
set -o pipefail
BOOT_DEV=$IMAGE_BLOCK_DEVICE
if [ ${DIB_EXTLINUX:-0} != "0" ]; then
echo "DIB_EXTLINUX no longer supported"
exit 1
fi
# Some distros have pre-installed grub in some other way, and want to
# skip this.
if [[ -f "/tmp/grub/install" ]]; then
exit 0
fi
BOOT_DEV=$IMAGE_BLOCK_DEVICE
# All available devices, handy for some bootloaders...
declare -A DEVICES
eval DEVICES=( $IMAGE_BLOCK_DEVICES )
function install_extlinux {
install-packages -m bootloader extlinux
# Right now we can't use pkg-map to branch by arch, so tag an
# architecture specific virtual package so we can install the
# rigth thing based on distribution.
if [[ "$ARCH" =~ "ppc" ]]; then
install-packages -m bootloader grub-ppc64
elif [[ "${DIB_BLOCK_DEVICE}" == "mbr" ||
"${DIB_BLOCK_DEVICE}" == "gpt" ]]; then
install-packages -m bootloader grub-pc
elif [[ "${DIB_BLOCK_DEVICE}" == "efi" ]]; then
install-packages -e -m bootloader grub-efi-$ARCH
install-packages -m bootloader grub-efi grub-efi-$ARCH
else
echo "Failure: I'm not sure what bootloader to install"
echo "Ensure you have included a block-device-* element"
exit 1
fi
echo "Installing Extlinux..."
GRUBNAME=$(type -p grub-install) || echo "trying grub2-install"
if [ -z "$GRUBNAME" ]; then
GRUBNAME=$(type -p grub2-install)
fi
# Find and install mbr.bin
for MBR in /usr/share/syslinux/mbr.bin /usr/lib/syslinux/mbr.bin \
/usr/lib/extlinux/mbr.bin /usr/lib/EXTLINUX/mbr.bin ; do
if [ -f $MBR ]; then
break
fi
done
if [ ! -f $MBR ]; then
echo "mbr.bin (from EXT/SYSLINUX) not found."
exit 1
fi
if type grub2-mkconfig >/dev/null; then
GRUB_MKCONFIG="grub2-mkconfig"
else
GRUB_MKCONFIG="grub-mkconfig"
fi
dd if=$MBR of=$BOOT_DEV
echo "Installing GRUB2..."
# Find any pre-created extlinux install directory
for EXTDIR in /boot/extlinux /boot/syslinux ; do
if [ -d $EXTDIR ] ; then
break
fi
done
if [ ! -d $EXTDIR ] ; then
# No install directory found so default to /boot/syslinux
EXTDIR=/boot/syslinux
mkdir -p $EXTDIR
fi
# When using EFI image-based builds, particularly rhel element
# based on RHEL>=8.2 .qcow2, we might have /boot/grub2/grubenv
# as a dangling symlink to /boot/efi because we have extracted
# it from the root fs, but we didn't populate the separate EFI
# boot partition from the image. grub2-install calls rename()
# on this file, so if it's a dangling symlink it errors. Just
# remove it if it exists.
if [[ -L /boot/grub2/grubenv ]]; then
rm -f /boot/grub2/grubenv
fi
# Finally install extlinux
extlinux --install $EXTDIR
}
function install_grub2 {
# Check for offline installation of grub
if [ -f "/tmp/grub/install" ] ; then
source /tmp/grub/install
# Right now we can't use pkg-map to branch by arch, so tag an
# architecture specific virtual package so we can install the
# rigth thing based on distribution.
elif [[ "$ARCH" =~ "ppc" ]]; then
install-packages -m bootloader grub-ppc64
elif [[ "${DIB_BLOCK_DEVICE}" == "mbr" ||
"${DIB_BLOCK_DEVICE}" == "gpt" ]]; then
install-packages -m bootloader grub-pc
elif [[ "${DIB_BLOCK_DEVICE}" == "efi" ]]; then
install-packages -e -m bootloader grub-efi-$ARCH
install-packages -m bootloader grub-efi grub-efi-$ARCH
else
echo "Failure: I'm not sure what bootloader to install"
echo "Ensure you have included a block-device-* element"
exit 1
fi
# XXX: grub-probe on the nbd0/loop0 device returns nothing - workaround, manually
# specify modules. https://bugs.launchpad.net/ubuntu/+source/grub2/+bug/1073731
GRUBNAME=$(type -p grub-install) || echo "trying grub2-install"
if [ -z "$GRUBNAME" ]; then
GRUBNAME=$(type -p grub2-install)
fi
if type grub2-mkconfig >/dev/null; then
GRUB_MKCONFIG="grub2-mkconfig"
else
GRUB_MKCONFIG="grub-mkconfig"
fi
# If no GRUB2 is found, fallback to extlinux
if [ -z "$GRUBNAME" ] || [ $($GRUBNAME --version | grep "0.97" | wc -l) -ne 0 ]; then
echo "No GRUB2 found. Fallback to Extlinux..."
install_extlinux
exit 0
fi
echo "Installing GRUB2..."
# When using EFI image-based builds, particularly rhel element
# based on RHEL>=8.2 .qcow2, we might have /boot/grub2/grubenv
# as a dangling symlink to /boot/efi because we have extracted
# it from the root fs, but we didn't populate the separate EFI
# boot partition from the image. grub2-install calls rename()
# on this file, so if it's a dangling symlink it errors. Just
# remove it if it exists.
if [[ -L /boot/grub2/grubenv ]]; then
rm -f /boot/grub2/grubenv
fi
# We need --force so grub does not fail due to being installed on the
# root partition of a block device.
GRUB_OPTS=${GRUB_OPTS:-"--force"}
# XXX: This is buggy:
# - --target=i386-pc is invalid for non-i386/amd64 architectures
# - and for UEFI too.
# GRUB_OPTS="$GRUB_OPTS --target=i386-pc"
if [[ ! $GRUB_OPTS == *--target* ]] && [[ $($GRUBNAME --version) =~ ' 2.' ]]; then
# /sys/ comes from the host machine. If the host machine is using EFI
# but the image being built doesn't have EFI boot-images installed we
# should set the --target to use a BIOS-based boot-image.
#
# * --target tells grub what's the target platform
# * the boot images are placed in /usr/lib/grub/<cpu>-<platform>
# * i386-pc is used for BIOS-based machines
# http://www.gnu.org/software/grub/manual/grub.html#Installation
#
if [ -d /sys/firmware/efi ]; then
if [ ! -d /usr/lib/grub/*-efi ]; then
case $ARCH in
"x86_64"|"amd64")
GRUB_OPTS="$GRUB_OPTS --target=i386-pc"
;;
"i386")
target=i386-pc
if [ -e /proc/device-tree ]; then
for x in /proc/device-tree/*; do
if [ -e "$x" ]; then
target="i386-ieee1275"
fi
done
fi
GRUB_OPTS="$GRUB_OPTS --target=$target"
;;
esac
fi
fi
fi
if [[ "$ARCH" =~ "ppc" ]] ; then
# For PPC (64-Bit regardless of Endian-ness), we use the "boot"
# partition as the one to point grub-install to, not the loopback
# device. ppc has a dedicated PReP boot partition.
# For grub2 < 2.02~beta3 this needs to be a /dev/mapper/... node after
# that a dev/loopXpN node will work fine.
$GRUBNAME --modules="part_msdos" $GRUB_OPTS ${DEVICES[boot]} --no-nvram
else
# This set of modules is sufficient for all installs (mbr/gpt/efi)
modules="part_msdos part_gpt lvm"
if [[ ${DIB_BLOCK_DEVICE} == "mbr" || ${DIB_BLOCK_DEVICE} == "gpt" ]]; then
$GRUBNAME --modules="$modules biosdisk" $GRUB_OPTS $BOOT_DEV
elif [[ ${DIB_BLOCK_DEVICE} == "efi" ]]; then
# We need to manually set the target if it's different to
# the host. Setup for EFI
# We need --force so grub does not fail due to being installed on the
# root partition of a block device.
GRUB_OPTS=${GRUB_OPTS:-"--force"}
# XXX: This is buggy:
# - --target=i386-pc is invalid for non-i386/amd64 architectures
# - and for UEFI too.
# GRUB_OPTS="$GRUB_OPTS --target=i386-pc"
if [[ ! $GRUB_OPTS == *--target* ]] && [[ $($GRUBNAME --version) =~ ' 2.' ]]; then
# /sys/ comes from the host machine. If the host machine is using EFI
# but the image being built doesn't have EFI boot-images installed we
# should set the --target to use a BIOS-based boot-image.
#
# * --target tells grub what's the target platform
# * the boot images are placed in /usr/lib/grub/<cpu>-<platform>
# * i386-pc is used for BIOS-based machines
# http://www.gnu.org/software/grub/manual/grub.html#Installation
#
if [ -d /sys/firmware/efi ]; then
if [ ! -d /usr/lib/grub/*-efi ]; then
case $ARCH in
"x86_64"|"amd64")
# This call installs grub for BIOS compatability
# which makes portable EFI/BIOS images.
$GRUBNAME --modules="$modules" --target=i386-pc $BOOT_DEV
# Set the x86_64 specific efi target for the generic
# installation below.
GRUB_OPTS="--target=x86_64-efi"
GRUB_OPTS="$GRUB_OPTS --target=i386-pc"
;;
"i386")
target=i386-pc
if [ -e /proc/device-tree ]; then
for x in /proc/device-tree/*; do
if [ -e "$x" ]; then
target="i386-ieee1275"
fi
done
fi
GRUB_OPTS="$GRUB_OPTS --target=$target"
;;
# At this point, we don't need to override the target
# for any other architectures.
esac
# If we don't have a distro specific dir with presigned efi targets
# we install a generic one.
if [ ! -d /boot/efi/$EFI_BOOT_DIR ]; then
echo "WARNING: /boot/efi/$EFI_BOOT_DIR does not exist, UEFI secure boot not supported"
# This tells the EFI install to put the EFI binaries into
# the generic /BOOT directory and avoids trying to update
# nvram settings.
extra_options="--removable"
$GRUBNAME --modules="$modules" $extra_options $GRUB_OPTS $BOOT_DEV
fi
fi
fi
# This might be better factored out into a per-distro 'install-bootblock'
# helper.
if [ -d /boot/grub2 ]; then
GRUB_CFG=/boot/grub2/grub.cfg
elif [ -d /boot/grub ]; then
GRUB_CFG=/boot/grub/grub.cfg
fi
# Override the root device to the default label, and disable uuid
# lookup.
echo "GRUB_DEVICE=LABEL=${DIB_ROOT_LABEL}" >> /etc/default/grub
echo 'GRUB_DISABLE_LINUX_UUID=true' >> /etc/default/grub
echo "GRUB_TIMEOUT=${DIB_GRUB_TIMEOUT:-5}" >>/etc/default/grub
echo 'GRUB_TERMINAL="serial console"' >>/etc/default/grub
echo 'GRUB_GFXPAYLOAD_LINUX=auto' >>/etc/default/grub
# NOTE(ianw) : 2021-05-11
# On Fedora there has been a switch to BLS
# https://fedoraproject.org/wiki/Changes/BootLoaderSpecByDefault
# which means that kernel-install will have created entries in
# /boot/loader/entries/...
# and, as the wiki page says
#
# The main issue appears to be that a number of places document
# a way to pass kernel options that is no longer working with
# BLS, i.e. edit /etc/default/grub before running
# grub2-mkconfig.
#
# i.e. exactly what we're doing above to override the root device
# in particular. Override grub2 to use it's old config format and
# remove any BLS entries the kernel install made.
#
# I imagine at some point we will reworking things in a more
# general sense to support BLS if that's what everything is
# switching to.
#
if [[ ${DISTRO_NAME} = fedora ]]; then
echo 'GRUB_ENABLE_BLSCFG=false' >> /etc/default/grub
rm -rf /boot/loader/
fi
if [[ -n "${DIB_BOOTLOADER_SERIAL_CONSOLE}" ]]; then
SERIAL_CONSOLE="${DIB_BOOTLOADER_SERIAL_CONSOLE}"
elif [[ "powerpc ppc64 ppc64le" =~ "$ARCH" ]]; then
# Serial console on Power is hvc0
SERIAL_CONSOLE="hvc0"
elif [[ "arm64" =~ "$ARCH" ]]; then
SERIAL_CONSOLE="ttyAMA0,115200"
else
SERIAL_CONSOLE="ttyS0,115200"
fi
GRUB_CMDLINE_LINUX_DEFAULT="console=tty0 console=${SERIAL_CONSOLE} no_timer_check"
echo "GRUB_CMDLINE_LINUX_DEFAULT=\"${GRUB_CMDLINE_LINUX_DEFAULT} ${DIB_BOOTLOADER_DEFAULT_CMDLINE}\"" >>/etc/default/grub
echo 'GRUB_SERIAL_COMMAND="serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1"' >>/etc/default/grub
# os-prober leaks /dev/sda into config file in dual-boot host
# Disable grub-os-prober to avoid the issue while running
# grub-mkconfig
# Setting a flag to track whether the entry is already there in grub config
PROBER_DISABLED=
if ! grep -qe "^\s*GRUB_DISABLE_OS_PROBER=true" /etc/default/grub; then
PROBER_DISABLED=true
echo 'GRUB_DISABLE_OS_PROBER=true' >> /etc/default/grub
fi
# GRUB_MKCONFIG call needs to happen after we configure
# /etc/default/grub above. Without this we can set inappropriate
# root device labels and then images don't boot.
#
# This produces a legacy config which both bios and uefi can boot
# Later we copy the final config to an efi specific location to
# support uefi specific functionality like secure boot.
$GRUB_MKCONFIG -o $GRUB_CFG
# Remove the fix to disable os_prober
if [ -n "$PROBER_DISABLED" ]; then
sed -i '$d' /etc/default/grub
fi
# grub-mkconfig generates a config with the device in it,
# This shouldn't be needed, but old code has bugs
DIB_RELEASE=${DIB_RELEASE:-}
if [ "$DIB_RELEASE" = 'wheezy' ]; then
sed -i "s%search --no.*%%" $GRUB_CFG
sed -i "s%set root=.*%set root=(hd0,1)%" $GRUB_CFG
fi
# Fix efi specific instructions in grub config file
if [ -d /sys/firmware/efi ]; then
sed -i 's%\(initrd\|linux\)efi /boot%\1 /boot%g' $GRUB_CFG
fi
# when using efi, and having linux16/initrd16, it needs to be replaced
# by linuxefi/initrdefi. When building images on a non-efi system,
# the 16 suffix is added to linux/initrd entries, but we need it to be
# linuxefi/initrdefi for the image to boot under efi
if [[ ${DIB_BLOCK_DEVICE} == "efi" ]]; then
sed -i 's%\(linux\|initrd\)16 /boot%\1efi /boot%g' $GRUB_CFG
# Finally copy the grub.cfg to the EFI specific dir to support
# functionality like secure boot. We make a copy because
# /boot and /boot/efi may be different partitions and uefi looks
# for a specific partition UUID preventing symlinks from working.
if [ -d /boot/efi/$EFI_BOOT_DIR ] ; then
cp $GRUB_CFG /boot/efi/$EFI_BOOT_DIR/grub.cfg
fi
fi
}
DIB_EXTLINUX=${DIB_EXTLINUX:-0}
if [ "$DIB_EXTLINUX" != "0" ]; then
install_extlinux
else
install_grub2
fi
if [[ "$ARCH" =~ "ppc" ]] ; then
# For PPC (64-Bit regardless of Endian-ness), we use the "boot"
# partition as the one to point grub-install to, not the loopback
# device. ppc has a dedicated PReP boot partition.
# For grub2 < 2.02~beta3 this needs to be a /dev/mapper/... node after
# that a dev/loopXpN node will work fine.
$GRUBNAME --modules="part_msdos" $GRUB_OPTS ${DEVICES[boot]} --no-nvram
else
# This set of modules is sufficient for all installs (mbr/gpt/efi)
modules="part_msdos part_gpt lvm"
if [[ ${DIB_BLOCK_DEVICE} == "mbr" || ${DIB_BLOCK_DEVICE} == "gpt" ]]; then
$GRUBNAME --modules="$modules biosdisk" $GRUB_OPTS $BOOT_DEV
elif [[ ${DIB_BLOCK_DEVICE} == "efi" ]]; then
# We need to manually set the target if it's different to
# the host. Setup for EFI
case $ARCH in
"x86_64"|"amd64")
# This call installs grub for BIOS compatability
# which makes portable EFI/BIOS images.
$GRUBNAME --modules="$modules" --target=i386-pc $BOOT_DEV
# Set the x86_64 specific efi target for the generic
# installation below.
GRUB_OPTS="--target=x86_64-efi"
;;
# At this point, we don't need to override the target
# for any other architectures.
esac
# If we don't have a distro specific dir with presigned efi targets
# we install a generic one.
if [ ! -d /boot/efi/$EFI_BOOT_DIR ]; then
echo "WARNING: /boot/efi/$EFI_BOOT_DIR does not exist, UEFI secure boot not supported"
# This tells the EFI install to put the EFI binaries into
# the generic /BOOT directory and avoids trying to update
# nvram settings.
extra_options="--removable"
$GRUBNAME --modules="$modules" $extra_options $GRUB_OPTS $BOOT_DEV
fi
fi
fi
# This might be better factored out into a per-distro 'install-bootblock'
# helper.
if [ -d /boot/grub2 ]; then
GRUB_CFG=/boot/grub2/grub.cfg
elif [ -d /boot/grub ]; then
GRUB_CFG=/boot/grub/grub.cfg
fi
# Override the root device to the default label, and disable uuid
# lookup.
echo "GRUB_DEVICE=LABEL=${DIB_ROOT_LABEL}" >> /etc/default/grub
echo 'GRUB_DISABLE_LINUX_UUID=true' >> /etc/default/grub
echo "GRUB_TIMEOUT=${DIB_GRUB_TIMEOUT:-5}" >>/etc/default/grub
echo 'GRUB_TERMINAL="serial console"' >>/etc/default/grub
echo 'GRUB_GFXPAYLOAD_LINUX=auto' >>/etc/default/grub
# NOTE(ianw) : 2021-05-11
# On Fedora there has been a switch to BLS
# https://fedoraproject.org/wiki/Changes/BootLoaderSpecByDefault
# which means that kernel-install will have created entries in
# /boot/loader/entries/...
# and, as the wiki page says
#
# The main issue appears to be that a number of places document
# a way to pass kernel options that is no longer working with
# BLS, i.e. edit /etc/default/grub before running
# grub2-mkconfig.
#
# i.e. exactly what we're doing above to override the root device
# in particular. Override grub2 to use it's old config format and
# remove any BLS entries the kernel install made.
#
# I imagine at some point we will reworking things in a more
# general sense to support BLS if that's what everything is
# switching to.
#
if [[ ${DISTRO_NAME} = fedora ]]; then
echo 'GRUB_ENABLE_BLSCFG=false' >> /etc/default/grub
rm -rf /boot/loader/
fi
if [[ -n "${DIB_BOOTLOADER_SERIAL_CONSOLE}" ]]; then
SERIAL_CONSOLE="${DIB_BOOTLOADER_SERIAL_CONSOLE}"
elif [[ "powerpc ppc64 ppc64le" =~ "$ARCH" ]]; then
# Serial console on Power is hvc0
SERIAL_CONSOLE="hvc0"
elif [[ "arm64" =~ "$ARCH" ]]; then
SERIAL_CONSOLE="ttyAMA0,115200"
else
SERIAL_CONSOLE="ttyS0,115200"
fi
GRUB_CMDLINE_LINUX_DEFAULT="console=tty0 console=${SERIAL_CONSOLE} no_timer_check"
echo "GRUB_CMDLINE_LINUX_DEFAULT=\"${GRUB_CMDLINE_LINUX_DEFAULT} ${DIB_BOOTLOADER_DEFAULT_CMDLINE}\"" >>/etc/default/grub
echo 'GRUB_SERIAL_COMMAND="serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1"' >>/etc/default/grub
# os-prober leaks /dev/sda into config file in dual-boot host
# Disable grub-os-prober to avoid the issue while running
# grub-mkconfig
# Setting a flag to track whether the entry is already there in grub config
PROBER_DISABLED=
if ! grep -qe "^\s*GRUB_DISABLE_OS_PROBER=true" /etc/default/grub; then
PROBER_DISABLED=true
echo 'GRUB_DISABLE_OS_PROBER=true' >> /etc/default/grub
fi
# GRUB_MKCONFIG call needs to happen after we configure
# /etc/default/grub above. Without this we can set inappropriate
# root device labels and then images don't boot.
#
# This produces a legacy config which both bios and uefi can boot
# Later we copy the final config to an efi specific location to
# support uefi specific functionality like secure boot.
$GRUB_MKCONFIG -o $GRUB_CFG
# Remove the fix to disable os_prober
if [ -n "$PROBER_DISABLED" ]; then
sed -i '$d' /etc/default/grub
fi
# Fix efi specific instructions in grub config file
if [ -d /sys/firmware/efi ]; then
sed -i 's%\(initrd\|linux\)efi /boot%\1 /boot%g' $GRUB_CFG
fi
# when using efi, and having linux16/initrd16, it needs to be replaced
# by linuxefi/initrdefi. When building images on a non-efi system,
# the 16 suffix is added to linux/initrd entries, but we need it to be
# linuxefi/initrdefi for the image to boot under efi
if [[ ${DIB_BLOCK_DEVICE} == "efi" ]]; then
sed -i 's%\(linux\|initrd\)16 /boot%\1efi /boot%g' $GRUB_CFG
# Finally copy the grub.cfg to the EFI specific dir to support
# functionality like secure boot. We make a copy because
# /boot and /boot/efi may be different partitions and uefi looks
# for a specific partition UUID preventing symlinks from working.
if [ -d /boot/efi/$EFI_BOOT_DIR ] ; then
cp $GRUB_CFG /boot/efi/$EFI_BOOT_DIR/grub.cfg
fi
fi

View File

@ -0,0 +1,5 @@
---
deprecations:
- |
Removed support for ``extlinux`` and ``grub`` (as opposed to
``grub2``) support from the bootloader element.