This element configures systemd to send its journal to the console,
which can then be retreived by server commands. In the case of
nodepool, if the image failed to boot the console will be dumped into
the logs when nodepool decides the node is not responding. Having
this can be very helpful diagnosing early boot errors.
Needed-By: https://review.opendev.org/#/c/669787/
Change-Id: I6b6df7023acb6b2f967b84840bc4b542ebc03727
This is helpful because if the inner host fails to boot, nodepool will
dump its console at debug level
Change-Id: I8d97e4378dda176521361ca03deac8337a059515
Depends-On: https://review.opendev.org/#/c/669939
Newer versions of open-iscsi seem to compile on Gentoo / musl. Use them
if we can. This also removes the cap on open-iscsi.
Change-Id: I596cb61494e459a419bce6a63deff89f9e78fe23
To avoid breaking systems that depend on released versions of
dib/glean (eg, nodepool), add one non-src nodepool job.
Change-Id: Ia8db42754429c79a80f6e8be545be2e48f019994
Previously we were trying to enable dbus-daemon service on all prior to
fedora 30. Unfortunately 28 and older don't have this service so this
broke those releases and only worked for 29. Fix this by only enabling
this service on fedora 29.
Change-Id: I1bd15dcf0bbe270afccb0c0c3ea6ad08862a53f1
The linux kernel and NetworkManager fight each other over control for
interface management when router advertisements are in use. Long story
short if the linux kernel configures a network interface for ipv6
before NetworkManager attempts to manage that interface then NM will
ignore the interface and not configure ipv4 on it.
This can happen because the kernel is configured to send router
advertisements solicitations which result in router advertisements which
the kernel uses to configure the interface(s). There is a default of a 1
second delay before sending the solicitation which in many cases is long
enough that NM has started before then. However, in slower environments
like those used for testing with qemu this isn't long enough.
Some testing by hand indicates that 15 seconds is about right so
increase the delay to 15 seconds via sysctl.conf.
Note this may increase boot times in ipv6 only environments (though it
is hard to be sure due to how systemd starts everything at once and does
socket activation and the like).
Change-Id: I475a253091cbaf63687b91c748c31a6753bb0f57
When virtualenv and setuptools gots installed from source and rpm
then their installation path lives at different places but when
the python script got called then that time it choses either of
rpm or source based path on system wide installation and leads to
different failure as their methods are not implemeted.
So by setting _clear_old_files to 0 will install
python3-virtualenv python3-pip python3-setuptools from rpms only
and avoid these failures.
Change-Id: I0c162f1fe8168513e352546ab8dd2b68fa65b88c
Signed-off-by: Chandan Kumar (raukadah) <chkumar@redhat.com>
autounmask=y (default) changes portage depsolving, causing errors
(mostly often seen in perl and binpkg related issues).
Disabling this functionality for DIB builds is OK as the enviroment is
not passed on post build and the build process is not interactive
anyway.
Change-Id: Ife9ace246bec16864ee4982bc456763af5dff2e8
Signed-off-by: Matthew Thode <mthode@mthode.org>
debian-minimal depends on debootstrap which depends on dpkg
This needs to be installed early as dpkg installs the apt keys early via
02-add-apt-keys in pre-install.d
Change-Id: I8580849ceaa7a5152c94f29afa890ac6d6983fb1
This change removes useless statement accidentally added in the
06576a02f0
Change-Id: I7ea4a24d8c72c9e72f5f87247403af0f9bf69b40
Signed-off-by: Maksim Malchuk <maksim.malchuk@gmail.com>
There are several jobs depending on working opensuse 15.1
images in nodepool, so it makes sense to ensure its working.
Also upgrade the previously marked experimental opensuse-15.0
job as it tests the xenial->opensuse combination, which is
particularly difficult to keep working and we'll need it in
the CI.
Change-Id: Icb6d998756ce5221e017959dcb59b21f0f023454
These are new nodepool functional jobs designed to give more
flexibility to the DIB/clean projects to define what they need
to test. Otherwise, they behave very similarly to the current
nodepool functional jobs
Depends-On: https://review.opendev.org/665023
Change-Id: Id73e913300cf3f0aaea05f7c2e8fdcb753421d04
There was a project stanza in zuul.d/jobs.yaml which was unexpected.
Move it to projects.yaml and combine it with the one just added.
Change-Id: Ie3b2e31833423ae8658861e8cc85300d45882f8e
This moves the Zuul project configuration into this repo rather
than project-config for easier modification of check/gate jobs.
Change-Id: I235a0584d2b0156406b2d07848d484a9148d064e
This patch adds a new environment variable to the ubuntu-minimal
element called DIB_UBUNTU_KERNEL that allows you to specify the kernel
meta package that will be using to install the kernel inside the image.
It supports "linux-image-generic" (The default), "linux-image-kvm", and
"linux-image-virtual".
This allows building images that are smaller in size (~200MB smaller
qcow2) that have only the kernel modules necessary for virtual
machines.
Change-Id: I8ce65e1d357d15e8ed8995ad1dcaea02bbd1986f
1. Sync sphinx dependency with global requirements. It caps python 2 since
sphinx 2.0 no longer supports Python 2.7.
2. Update some URLs to latest
3. Remove the unnecessary space
Change-Id: I5464be9e055feecd80918f691448acf5f100e701
Use openSUSE 15.1 as default, which is the latest released stable
openSUSE release.
Remove leftovers for unmaintained openSUSE 42.2 images.
Depends-On: https://review.opendev.org/#/c/660126/
Change-Id: I0b204b7b3d7ae74b6749320b3bfe1ca89d154ebb
This patch removes the check and default for rhel 8 requiring
xfs filesystem as rhel 8 images can successfully be built with
ext4 filesystems.
Change-Id: I1a6bfa26324fd43ae0c77c2c977dda0dd56e26e5
Nowadays, in the time of Predictable Network Interface Names, the
network interface names 'ethX' are not used that often any more.
Depending on the virtualization layer and the guest OS names like
'ens3', 'enp1s0' or 'enp0s31f6' are used.
This patch enables the user to set DIB_NETWORK_INTERFACE_NAMES to a
list of network interfaces which are brought up using DHCP during
(first) boot.
Change-Id: I04cc2ee710f0389a8085b1c91d9329784cb28048
Signed-off-by: Andreas Florath <Andreas.Florath@telekom.de>
The latest Fedora/Ubuntu images don't ship python2 by default, so we
need to use our dib-python wrapper for this so we work in python3 only
environments.
This change also correctly creates the pip.conf and .pydistutils.cfg
files with trusted host extracted from the index-url.
Related-bug: 1577105
Change-Id: Ibb5348af3e3bbe46b19affe90a8930a4b4ad4cad
Signed-off-by: Maksim Malchuk <maksim.malchuk@gmail.com>
RHEL8 ships a bunch of grub2-efi-X-modules in its main
repository, each of which provides grub2-efi-modules,
potentially causing nondeterminism when building images.
This changes the DIB elements to always use architecture-
specific RPMs when RHEL8 is selected.
Change-Id: If94f3721195d5ecd80036e4234a3ca223a19c349
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1716672
When I said in I8594d1fe05242f246a5809740a115ab2f84ac5a3 that 12 MiB
ought to be enough, I should have expected that I would be proven wrong.
While 12 MiB is enough to fit shim-x64 and grub2-efi-x64, yum fails to
update these packages to newer versions:
Transaction check error:
installing package shim-x64-15-2.el7.centos.x86_64 needs 7MB on the /boot/efi filesystem
installing package grub2-efi-x64-1:2.02-0.76.el7.centos.1.x86_64 needs 3MB on the /boot/efi filesystem
Error Summary
-------------
Disk Requirements:
At least 7MB more space needed on the /boot/efi filesystem.
It is recommended that the ESP partition be much bigger. This commit
bumps its size to 550MiB, following guidelines from Rod Smith to avoid
incompatibilities with some EFIs [1].
[1] https://www.rodsbooks.com/efi-bootloaders/principles.html
Change-Id: If9515234f1a803cda32b2482f8abe10ddf0e6d26
It seems that zypper was removed from debian-stretch which means
that we have to ignore it in bindep (likely for the same reason
that we are excluding bionic)[1].
[1]: https://tracker.debian.org/news/836378/zypper-removed-from-testing/
Change-Id: I60d83414fdc241d65eda8ab88c8e284e5d0bd257
Avoids failing on the first attempt to download the image to cache as
mirrors hosting them can randomly go down, usually with a connection
refused.
Change-Id: I9de9f33c2cc16596d04b35c4eb92621e6a2c7511
