Commit Graph

19 Commits

Author SHA1 Message Date
Yolanda Robla
81f495ad00 Increase timeout for removal
Under certain environments, this timeout was causing failures
because it was too short. Increasing to 10, to give time to
perform the specified tasks.

Change-Id: I01dd3553f38e1137b2fcb04b4ee12202be3ad1a8
2017-08-11 16:29:26 +02:00
Jenkins
2ed643a734 Merge "Use the dib python to do cleanup" 2017-06-29 21:22:36 +00:00
Tony Breeds
c383428727 As far as block-device layout is concerned ppc64le == ppc64el
Change-Id: I06a89f256f66eba2f73dd110f5d8a61e0f0a924c
2017-06-27 00:34:33 +00:00
Jamie Lennox
aa03e24c30 Use the dib python to do cleanup
In a system where python2 is not installed and /usr/bin/python is not
linked then the cleanup process will fail trying to invoke the python
script. Use the previously determined DIB_PYTHON_EXEC if it's available.

Change-Id: I128292808ccef92cc1803988b35caae5aa6fa541
2017-06-22 11:20:51 +10:00
Ian Wienand
6c394f5746 Pass all blockdevices to bootloader
Currently we only export "image-block-device" which is the loopback
device (/dev/loopX) for the underlying image.  This is the device we
install grub to (from inside the chroot ...)

This is ok for x86, but is insufficient for some platforms like PPC
which have a separate boot partition.  They do not want to install to
the loop device, but do things like dd special ELF files into special
boot partitions.

The first problem seems to be that in level1/partitioning.py we have a
whole bunch of different paths that either call partprobe on the loop
device, or kpartx.  We have _all_part_devices_exist() that gates the
kpartx for unknown reasons.  We have detach_loopback() that does not
seem to remove losetup created devices.  I don't think this does
cleanup if it uses kpartx correctly.  It is extremley unclear what's
going to be mapped where.

This moves to us *only* using kpartx to map the partitions of the loop
device.  We will *not* call partprobe and create the /dev/loopXpN
devices and will only have the devicemapper nodes kpartx creates.
This seems to be best.  Cleanup happens inside partitioning.py.
practice.  Deeper thinking about this, and more cleanup of the
variables will be welcome.

This adds "image-block-devices" (note the extra "s") which exports all
the block devices with name and path.  This is in a string format that
can be eval'd to an array (you can't export arrays).

This is then used in a follow-on
(I0918e8df8797d6dbabf7af618989ab7f79ee9580) to pick the right
partition on PPC.

Change-Id: If8e33106b4104da2d56d7941ce96ffcb014907bc
2017-06-08 17:14:22 +10:00
Ian Wienand
89a85f6fbb Update tracing in block_device_create_config_file
Something seems to be going on with the ppc matching in the gate test.
Small updates to see what's going on...

Change-Id: Ie48cd4ce1f983a58932a577a43746240f6866936
2017-06-07 13:30:38 +10:00
Yolanda Robla
5b305ffa7b Only unmount directories that are mounted
To avoid failures with double unmount, skip unmounting
the mountpoints that are managed by block device.

Change-Id: I228779eb9bf544a27a53e5017c87573023fd375a
2017-05-17 08:37:25 +02:00
Andreas Florath
e4e23897a1 Refactor: block-device filesystem creation, mount and fstab
This patch finalizes the block device refactoring.  It moves the three
remaining levels (filesystem creation, mount and fstab handling) into
the new python module.

Now it is possible to use any number of disk images, any number of
partitions and used them mounted to different directories.

Notes:

 * unmount_dir : modified to only unmount the subdirs mounted by
   mount_proc_sys_dev().  dib-block-device unmounts
   $TMP_MOUNT_PATH/mnt (see I85e01f3898d3c043071de5fad82307cb091a64a9)

Change-Id: I592c0b1329409307197460cfa8fd69798013f1f8
Signed-off-by: Andreas Florath <andreas@florath.net>
Closes-Bug: #1664924
2017-05-12 13:52:02 +02:00
Andreas Florath
803d40b0c6 Refactor block_device: passing command line parameters
The original approach was to pass each and every command
line parameter to the block device.  While the block device
functionality gets extended, this is not any longer practical.

Instead of passing in all the parameters separately this patch
collects these in a YAML file that is passed in to the block device
layer.

Change-Id: I9d07593a01441b62632234468ac25a982cf1a9f0
Signed-off-by: Andreas Florath <andreas@florath.net>
2017-04-23 09:51:18 +00:00
Jenkins
347833856e Merge "Ignore missing path in unmount_dir" 2017-04-07 15:59:47 +00:00
Corey O'Brien
aa90f7991a Ignore missing path in unmount_dir
If the path is missing, unmount_dir currently exits with an error which
unintentionally aborts cleanup efforts early. This change makes
unmount_dir idempotent by exiting successfully if a directory doesn't
exist.

Change-Id: I1491b4344e8569ecb2833f44baee445a89a39d61
2017-04-06 10:08:13 -04:00
Ian Wienand
fd424757a6 Don't provide dib-run-parts
It was an oversight during v2 development for dib to start providing
dib-run-parts.  The intention was for dib to use a vendored
dib-run-parts directly from $_LIB and have no dependencies on
dib-utils at all.  By exporting dib-run-parts, we created an
unintentional conflict with the dib-utils package which provides the
same script.

Tools that depend on dib-utils are unaffected by this
(os-refresh-config).

The only tool that installs diskimage-builder and then assumes
dib-run-parts is available in the path is instack.  I have proposed
Ibfe972208df40fa092b11b5419043524c903f1b4 to modify that to use our
internal version.

Change-Id: I149c345d38d761a49b3a6ccc4833482f09f1cd05
2017-04-05 13:11:20 +10:00
Ian Wienand
7a155e08bf Merge branch 'master' into merge-branch
Change-Id: I28e4c7837d84e8b66eff3d182666c5a87a9e3c9b
2017-02-09 13:35:53 +11:00
Ian Wienand
3f8800832a Release 1.27.0
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJYk8+9AAoJEBty/58O8cX8LdIH+wU/VrEVs0XYohiL6DUgabzs
 112U3UUihH5xMc/ca9Tarx+XwEvfMZkwYN2Qr0JoRJjmSt2AL6AezUhGSV+98vaY
 iQEccaFDFYlyDHm4V2r7N1xwS0B3mx87FPqVQQSUKlc3JsQxCy4o9RtD9aM8Gvqy
 +gAxMxL3p3O131K0Rvb0U5lC1FLgft9SuljCV8i5nU4/HdoryD6hedz2/ss8a9KG
 KKEdBKvPBKn73+nb8peQD/VXpej9C31r87q5VEjUsZkJ7gduY/qYLlGGgoBQqAXN
 WQ/ef1RkQKW5ba2jsjnk7fdOrA0+wYENxorR2WecuZbe2ieXw6fP3lYiD6VeWsM=
 =IUuh
 -----END PGP SIGNATURE-----

Merge tag '1.27.0' into merge-branch

Release 1.27.0

Change-Id: I9f6948636cae6d375d1d8315976504021f5a3bbb
2017-02-03 11:49:45 +11:00
Ian Wienand
b6e631360f Release 1.24.0
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJYP+r7AAoJEBty/58O8cX8ZcMIAI7Yy2BfGqY/jfyLYNryATSu
 g78McMxAeOiPYII+KKyVkeWsChKJUafLZr/ppO95pm7ZLXeHQeC4MHDI68RmghIX
 HVXn4hPYzwlZ+Yr4hqaEf11H+vw0TDxo2a5bxlQZw+FCx9+3lkR60QxWf8a6QCxv
 nLqKIhtpwGi9mIyvAya+MaOmHMHqbNYgIBHKP0yXhTdxoHZoJWZeXN1rkelwAF9N
 TS1+KwIk+uemn1ZlqzYDWj8euyFyAv8L0WlF0ztCKe7TAFvNeMo26fLykeKHVDEo
 GC5R8MshiOtihPC972rNIponIzd62AetTlDxfK+gcUZO21pNTrlgdLX5Jn04fo0=
 =BpQc
 -----END PGP SIGNATURE-----

Merge tag '1.24.0' into merge-branch

Release 1.24.0

Change-Id: I23cfa6f8dc66bb6a1d957a49a5b468cfd47c005b
2017-01-31 14:14:19 +11:00
Andreas Florath
ec7f56c1b2 Refactor: block-device handling (partitioning)
During the creation of a disk image (e.g. for a VM), there is the need
to create, setup, configure and afterwards detach some kind of storage
where the newly installed OS can be copied to or directly installed
in.

This patch implements partitioning handling.

Change-Id: I0ca6a4ae3a2684d473b44e5f332ee4225ee30f8c
Signed-off-by: Andreas Florath <andreas@florath.net>
2017-01-24 19:59:10 +00:00
Ian Wienand
448a2602fe Merge remote-tracking branch 'origin/master' into merge-branch
Change-Id: I05cc51c699008018d557ed3874d71af26fd60240
2016-11-29 07:43:46 +11:00
Ian Wienand
7d5afecfd9 Merge remote-tracking branch 'origin/master' into merge-branch
Change-Id: Ibab1bb95521292ae818bd91f7073c3749a2cc0cb
2016-11-18 13:53:56 +11:00
Ian Wienand
97c01e48ed Move elements & lib relative to diskimage_builder package
Currently we have all our elements and library files in a top-level
directory and install them into
<root>/share/diskimage-builder/[elements|lib] (where root is either /
or the root of a virtualenv).

The problem with this is that editable/development installs (pip -e)
do *not* install data_files.  Thus we have no canonical location to
look for elements -- leading to the various odd things we do such as a
whole bunch of guessing at the top of disk-image-create and having a
special test-loader in tests/test_elements.py so we can run python
unit tests on those elements that have it.

data_files is really the wrong thing to use for what are essentially
assets of the program.  data_files install works well for things like
config-files, init.d files or dropping documentation files.

By moving the elements under the diskimage_builder package, we always
know where they are relative to where we import from.  In fact,
pkg_resources has an api for this which we wrap in the new
diskimage_builder/paths.py helper [1].

We use this helper to find the correct path in the couple of places we
need to find the base-elements dir, and for the paths to import the
library shell functions.

Elements such as svc-map and pkg-map include python unit-tests, which
we do not need tests/test_elements.py to special-case load any more.
They just get found automatically by the normal subunit loader.

I have a follow-on change (I69ca3d26fede0506a6353c077c69f735c8d84d28)
to move disk-image-create to a regular python entry-point.

Unfortunately, this has to move to work with setuptools.  You'd think
a symlink under diskimage_builder/[elements|lib] would work, but it
doesn't.

[1] this API handles stuff like getting files out of .zip archive
modules, which we don't do.  Essentially for us it's returning
__file__.

Change-Id: I5e3e3c97f385b1a4ff2031a161a55b231895df5b
2016-11-01 17:27:41 -07:00