Updates the generate-interfaces-file.sh script in
the dhcp-all-interfaces element so that we only
add interfaces that have real MAC addresses.
The generate-interfaces-file.sh script is run early enough
in the boot process (before OVS is initialized) that this
isn't usually a problem unless you execute it manually by hand
after booting. Then you'll end up with network/DHCP
configs for all of your OVS bridges, etc. This
patch avoids configuring all of the virtual interfaces
which have generated MAC addresses.
Change-Id: I7a705084aa5b11305ac0ec5ca37fd2e87a2ae8b7
Closes-bug: 1239479
map-services is used by os-svc-restart from Change-Id:
I15eb2a5db4b0a08e1fb40bda640cd8f224939a92
map-services is not only distro specific, it also needs to be able to
handle different service names for a given distro based on source vs
package installs, since the service names may be different. This is done
via a simple check if the requested service is defined, if it is, we
print the requested name, otherwise, we print the mapped name.
Currently only implemented for Fedora. Support for other distros is
easily implemented just like map-packages.
Change-Id: Ie7b2dcfa7cabd887d5c212df110d90f9d00a7f65
The SELinux relabel of the filesystem is taking almost 2 minutes and
isn't needed unless you actually plan to run with SELinux enforcing.
Plus, it appears to "leak" out of the chroot, referencing filesystems on
partitions that aren't even mounted in the chroot.
Note you just can't use getenforce or selinuxenabled here to get the
state of SELinux because those commands are not accurate inside a
chroot.
TBH, a downside of this is that if someone goes to try to enable SELinux
in an image where it was built with it not enabled, the file contexts
are going to be wrong. So they'd need to relabel themselves at that
point. However, this saves me quite a bit of time during image builds,
so I thought I'd submit to get other folks opinion on it.
Change-Id: I2132060d573fc93cf974f3560fdc651ff8ba38b4
If creating an image of a disto without grub2 extlinux is instead used,
extlinux was being configured to mount the root filesystem as
read/write which in turn causes e2fsck to fail to test the filesystem,
on RHEL 6.5 this causes the boot process to fail.
Change-Id: I07859e0df9a2bc1ddd8c5f2ed4509ba14312e140
Delete stale symlinks created by current openSUSE 13.1
for kpartx loopback partitions. Those break bootloader
installation otherwise.
Change-Id: I13a7387e341b4426b459610fd1d3c49ce5730f46
openSUSE's ccache package doesn't include symlinks to enable ccache
for gcc by default, so we set them up manually.
Change-Id: I79dbe814ff2dfad8158fb1f06d68cc07eae19a41
A Red Hat Satellite URL may be provided as the source for
Red Hat packages. A Satellite key may be provided for a pre-
defined set of RHN channels to be automatically applied. Support
for installation of a Satellite certificate also provided.
Change-Id: Iae5b97d6f4732a28efa08ab778a56c2f9b6b6bd9
When registering to RHN or RHSM a list of space-separated
channels or repositories may be provided. This allows control
over which packages are available to the system during build.
Note, the optional channel or repository is added by default
since diskimage-builder requires access to its packages. This
list is for additional channels or repos.
Change-Id: I9cf90d47ab1d09f5491f574132410438f9e294e3
This provides basic support to register to the Red Hat Network
(RHN Classic) for packages. The image is unregistered from RHN
before completing image build. The rhnsd service is prevented
from starting since it is not needed for packagage install.
Change-Id: I2dc124cdc6ae59a63fd94d82d77108acccc3f668
Red Hat periodically updates the qcow2 guest image available
for download. This sets the default image name to the latest.
Change-Id: Iba3075bbee3b41918d5cd3da9721fcbf98ff3bcd
Rather than using a script to mount the image using nbd to extract the
kernel and ramdisk, make a new element called baremetal, which contains
a cleanup.d script that will copy them out to <image name>.{vmlinuz,initrd}.
Closes-Bug: 1224669
Change-Id: I8f3569aa12148d18b1c8242b6fbbd8857894b26f
Add a script to ubuntu's pre-install.d that will change
archive.ubuntu.com to a mirror specified in $DIB_DISTRIBUTION_MIRROR.
Change-Id: Idfd5a40ec8a1912a5de5dcdcaf9795946b0b53b8
Update the default version of Fedora to 20 for the cloud image. A few of
us have run through devtest using Fedora 20 and it's working.
To continue to use 19, just specify DIB_RELEASE=19 for your image
builds.
Change-Id: I3d48272dedcd424747db5485ae0d8e9953f04191
We need to use the eval command together with curl so that the
$TOKEN_HEADER variable is seems by curl as two arguments: "-H" and
"'X-Auth-Token: ...". Without the eval bash would interpret the variable
as only one argument "-H 'X-Auth-Token: ...'" making the curl command
to not understand that parameter and fail to pass the auth_token to the
Ironic API.
Change-Id: I4dcfc323d6ab9b7fa207328386ef65a146a93617
The source-repositories element will now symlink the install scripts
corresponding to the set install type for an element into the install.d
directory.
Different install types are implemented by elements by writing scripts to do
the install type under install.d/<element-name>-<install-type>-install
directories.
For example, the nova element would provide:
nova/install.d/nova-package-install/74-nova
nova/install.d/nova-source-install/74-nova
source-repositories will create the following symlink for the package
install type:
$TMP_HOOKS_PATH/install.d/74-nova -> nova-package-install/74-nova
Or, for the source install type:
$TMP_HOOKS_PATH/install.d/74-nova -> nova-source-install/74-nova
Change-Id: I1bfaf39e5a98b2af904fbc6d674dbada30b27ed9
dib-run-parts should dereference symlinks, and if they point to an
executable file, execute that file as a script. This can be accomplished
by using the xtype predicate in the find command instead of the type
predicate.
This change is needed so that we can dynamically symlink hook scripts
into hook directories such as install.d at runtime to support different
install types.
Change-Id: I933e7f4b4dcf16956841d8c14aa63b0f9a18fc5d
Upstart support in Debian is somewhat experimental, but having it would
be especially useful for TripleO which already generates upstart scripts
which will work fairly well on Debian based systems.
Change-Id: I267da5ae7bc4a484fac152a14963d96ca2ad2693
Also allows setting the "distro name" so that things that change the
debootstrap signature will have a different tarball.
This is being done in advance of a debian-upstart element to allow
experimenting with debian and upstart.
Change-Id: I1a558fdaf5924c65f1cced9f9bf29d73643c30af
tgtd returns execution control and backgrounds itself almost immediately
and before it has made it's listening socket available. This can cause a
race condition as the tgtd socket is not available when tgtadm is run,
resulting in an error:
failed to send request hdr to tgt daemon
Add a function to check if the socket is available before moving on to
calling tgtadm, and a wait_for helper function we can use. We'll
check for the socket every 0.5 seconds, for up to 5 seconds.
I'm seeing this issue on almost every deploy using a ramdisk built from
Fedora 20. I'm not sure if something has changed in tgtd, but this
behavior is documented since Fedora 18 at least. In the systemd script
for tgtd, there is actually "sleep 5" to work around the problem.
See Also: https://bugzilla.redhat.com/show_bug.cgi?id=848942
Change-Id: Iffa9fc63393309ca653d592dff17316ecbea3e09
This element can be used to provide a custom list
of modules via DIB_MODPROBE_BLACKLIST which
will be disabled via modprobe.d/blacklist.conf.
I'm using this to disable network adapters on the
Red Hat TripleO rack where the devices can't be
explicitly disabled via the BIOS.
Change-Id: I8a0a8ee05fa62628434d7f6422577dbf5cdd7a2e
Updates the dhcp-all-interfaces element so that the link
check tries up to 10 times.
On some of my machines 3 times (seconds) doesn't appear to
be quite long enough...
Change-Id: Ibf7015162fc890d4de8a417b868b0301146944c0
This is pretty much a duplicate of t-i-e/elements/os-apply-config, isn't used
in tripleo and the upstart script is out of date. We don't need to carry this.
Change-Id: I2b23d5930afae42cff28e2d5ce3d6c84224afa4a
Adds a new "package" type to source-repositories. When the package type
is specified in an origin-repository-* file the package name and type
"package" need to be specified like so:
nova package
The existing map-packages mechanism can be used to map the specified
package name to the actual distribution package names. The
pre-configured package repositories on the image will be used to install
the packages during the install.d phase of the image build.
If the repo type is package, an environment.d hook script is updated
with an environment variable which is sourced by dib-run-parts. This is
so that other hooks, particularly in install.d, will know what repo type
was used and can make the correct decision about doing a source install
or not.
Change-Id: Ief4e524664cd32d2087aeb3b1766f05e017de91e
Before downloading and caching the latest version of grub2, we need to
first remove all old versions. Otherwise, the find command that writes
the grub2 version to /tmp/grub/install to install during the finalise
phase could pick one of the older versions of grub2 in the cache. This
will cause the install during the finalise phase to fail since the older
version of grub2 will conflict with the newer installed version of
grub2-tools.
Change-Id: I5b43e359db3ba81ed6283dfb41c7e89629516d38
Includes:
* Enhancements to the generate-interfaces-file.sh script
so that it generates ifcfg network-scripts for
distros like Fedora/RHEL.
* Includes a new dhcp-all-interfaces.service systemd
script which ensures network interfaces get generated
before the network service starts on Fedora.
* Add a new disable_interface function to
generate-interfaces-file.sh which (on Fedora)
will delete the ifcfg config for an interface which
isn't plugged in.
This is important because ifcfg-eth0 exists by default
and we want to remove it if the NIC isn't connected.
Previous behaviour on Ubuntu is unchanged and the
generate-interfaces-file.sh just logs it as skipped.
* General doc updates...
I tested this on a multi-nic machine w/ Fedora where the first NIC
exists but was not connected.
Change-Id: Ia99e312539da43caefd72aa60398d43dac5dcc8f
Closes-Bug: 1239880
Tcpdump has a fairly small footprint and should be installed to all
images (it currently is on the ubuntu image by default). Sometimes the
reason you need it is also the reason its to late to get it.
Change-Id: I4849157515b389d534bdee755cdac6b0768fcb29
install-packages is an executable script, it should be +x. The install
command that was installing it is setting permissions to 755, so we were
fine there. However, I was trying to test the script outside of an
image build to test a change, and it's helpful to have it +x in the
repository for that context like all the other scripts under bin.
Change-Id: Ic300cc56d463640d119db4e310d375c66ed133ca
If "kpartx -av" is called and there is no unused /dev/loop* device,
then kpartx fails. Calling "losetup -f" finds first unused device
and creates it if it doesn't exist.
Fixes bug #1195264
Change-Id: I5d59b519fd8e2a7380b71a788f9d3f2331b6567f
dib-init-system is installed in 04-dib-init-system. Before it is
installed, 10-dib-init-system.bash may be sourced so command not found
issue found.
The patch invokes "/tmp/target.d/dib-init-system" directly in
10-dib-init-system.bash.
Change-Id: I9843224497c7dab8392261b26d62b6d79d1795ee
This is a dependency for the libvirt-python Python package that
ceilometer-agent-compute uses. libvirt-python is already installed globally in
the system via apt/yum, but that's not available to ceilometer-agent-compute's
virtualenv.
Change-Id: I07a12226889c6cda3bd04021240ee9714a396522
If we don't recognise git/tar/etc as source-repositories repotypes, we
now log the repotype, for debugging purposes.
Change-Id: I7b870807658441c928c7880291eb0284b6f97778
We now unconditionally cache the repositories being fetched with
source-repositories.
Additionally, by improving the way we handle repository refs, we are now
able to build images with code taken directly from gerrit reviews.
Change-Id: Ifd4c5691f6761eb5551663e6d0aa1c0e42afced3
Add apt-sources element for Ubuntu OS to override the default
/etc/apt/sources.list in cloudimg.
Set DIB_APT_SOURCES with a proper sources.list file to replace
the default one.
If you want to use this element in tripleo project, set NODE_DIST or
EXTRA_ELEMENTS / UNDERCLOUD_DIB_EXTRA_ARGS / OVERCLOUD_DIB_EXTRA_ARGS
to make it take effect at build time and run time.
e.g. before running devtest.sh:
export DIB_APT_SOURCES=/etc/apt/sources.list
export NODE_DIST="ubuntu apt-sources"
Change-Id: I9ce0d03b506c2948b96382e4d6e85f0aff906450
Some of the tripleo image elements rely useradd a for creating a group
with the same name as the user that is added. On openSUSE is feature
is turned off by default. So enable it here.
Change-Id: I120067e5e522dc6e704e7f09b724d60dee0c7f22
52-force-text-mode-console, running after 51-bootloader, calls
grub2-mkconfig (on Ubuntu that will happen via the update-grub call).
This call will overwrite all the changes that 51-bootloader did to the
grub.cfg. By merging the 52-force-text-mode-console code into
51-bootloader we avoid that. This also means that 51-bootloader will now
call grub2-mkconfig regardless of whether there is already and existing
grub2 configuration or not (52-force-text-mode-console did that in the
past anyway).
Additionally this commit enables the force to textmode code for openSUSE
(was previously only working correctly for Ubuntu and Fedora).
Closes-Bug: #1260323
Change-Id: Ida8e1a69df22d41ad70eb7154707c50613b536a8
This provides some customizations for zypper based distributions (e.g.
openSUSE and SLES). It is heavily inspired by the yum element and sets up
zypper to cache downloaded package outside of the chroot so that they can be
reused to speed up subsequent builds.
Change-Id: I775c921ee19cf7d1180fb68c1b7857ea6245a77d
Remove the comment about the rpm-distro element. The only tiny bit we copied
from it is 01-install-bin. 01-override-zypp-arch was unneeded and has been
removed from the opensuse element before the initial merge.
Change-Id: I9886bb6e7d723690f2d2ac476d6d3aca5a367607
Fix the test for $TARGET_ROOT in root.d/50-yum-cache.
Don't use $TARGET_ROOT in pre-install, it's only set for "root" and "cleanup".
Change-Id: I048364ea08ef503a4466f3494f18f72ebf99b5c2
This is currently experimental/incomplete. See
elements/opensuse/README.md for details.
Change-Id: Ie5bcab15c9703cf15ceb642fb986a8afc34f96fb
Co-Authored-By: Ralf Haferkamp <rhafer@suse.de>
Make the source-repositories element log which repo it's cloning from
so it's easier to tell what's going on.
Change-Id: I224f7bd98bc3d0ba94313dae9063d4ba4e25bdaa
If you build a ramdisk with ramdisk-image-create and forget to specify
-o, you end up with a .kernel and .initramfs file as the image outputs.
This commit defaults the $IMAGE_NAME value to image so you'd end up
with image.kernel and image.initramfs
Change-Id: I10f3ac9ad178c32119523e4da930070e3ade4f73
Ironic requires callback from deploy ramdisk via API with json data.
Auth token also required if Keystone auth enabled for Ironic API.
This patch adds separate element 'deploy-ironic' for Ironic deploy
ramdisk creation.
Change-Id: I5ef96711763e50307cfa17c406a9e16bffb937bc
When `/etc/selinux/config' does not exist, although selinux has
already been disabled, the image creation will fail.
Change-Id: I9e4a9a006073fd3f708049407ef98f82c3f399d1
In tests, saucy has been able to match raring for the ability to bring
up clouds, so we can roll forwards and switch the default to saucy.
Change-Id: I4df35d40f902c0daa7b2761d7afea8db25526753
tgt maps to scsi-target-utils on RHEL. This mapping already exists for
the Fedora element, so no need to add it there.
Change-Id: Ifc9a8976299458cdef50c2fbe00ba6a0c8d22f00
Closes-Bug: #1252975
We need to update openssl before proceeding as part of the image build
because the version on the Fedora cloud image is no longer compatible
with new python environments installed by virtualenv.
Change-Id: I3ed889f7382e7ca0de052ef5bdd6afeefc8bbdd8
Closes-Bug: #1254879
We can no longer rely on the name of the udevd binary as a hint for its
version, so instead we query the binary and behave accordingly.
Change-Id: Id4c869dfeeca5ed970169343b6b5f0f2c4499ca3
The Ubuntu build for ARM breaks when the pre-install step attempts to remove
grub components. This change gates those package removals based on whether
they are currently installed.
Change-Id: Ie169dbf12213e69b3713b3b1f9a68ae224f9fd31
The key 'RPM-GPG-KEY-redhat-release' may not exist in image
e.g. when you use non-default image (for example, if you build CentOS
image using rhel element).
Fixes bug #1252697
Change-Id: Iae642abb7a7f76c5528750dafedd4fd4bda56fe2
We can now actually override the $TROUBLESHOOT environment variable in
ramdisks, by not declaring it as readonly. Yay for insufficient
end-to-end testing.
Change-Id: I026c9dbdd411bf3eb945d5b18188eb1eedf3850a
We now allow operators to drop into a troubleshooting shell while
booting a deploy ramdisk, without having to have pre-configured their
desire to do so ahead of time, by means of a 10 second pause for them to
press a key.
Change-Id: I05ffa1ebaa95c83dee7bd2a2f52ba4c08928bb10
