Commit Graph

11 Commits

Author SHA1 Message Date
Xinliang Liu
8c86d876e3 Fix centos stream set mirror
This intents to fix job dib-functests-bionic-python3-image.
And no CentOS-Stream-centosplus.repo file[1].

[1]: http://rpm.pbone.net/info_idpl_72967298_distro_centosother_com_centos-stream-repos-8-2.el8.noarch.rpm.html

Change-Id: I9d69413f31d0a9d83e992d05d177f683b7361337
2021-04-02 06:56:45 +00:00
Maksim Malchuk
c4c21967d8 Fix hooks order for CentOS/Fedora when mirror used
The python3/python3-pyyaml packages both are never installed and dnf
itself never updated when $DIB_DISTRIBUTION_MIRROR set and used.

This change fix the order of the operations:
 1. yum/dnf configure.
 2. *.repo patching.
 3. yum/dnf update/install execution.

Change-Id: Ifbbf1f0190fe8c8a77fb3be820e8056447e755f6
Signed-off-by: Maksim Malchuk <maksim.malchuk@gmail.com>
2021-03-04 10:54:52 +00:00
Javier Pena
59f6922e22 Fix CentOS Stream 8 base repo in centos element
The file name for a CentOS 8 repo file is BaseOS.repo, not Base.repo.

Change-Id: I97f5cbd8e5bc17b453db4fcee6e8492652da73aa
2021-01-22 14:54:01 +01:00
Daniel Pawlik
8c714716ed Remove centos-repos package for Centos 8.3
With Centos 8.3, centos-repos package has been replaced by
other packages [1].

[1] https://lists.centos.org/pipermail/centos-devel/2020-September/056069.html

Also Increase flake8 and pyflakes version in lower-constraints.txt as
this was already broken.

Change-Id: Ife139fcaff0c2d944098ea353259971d2d3f18b8
2020-12-14 16:55:21 +00:00
Carlos Goncalves
e4b6a2faef Add support for CentOS 8 Stream cloud image
This patch adds support for CentOS 8 Stream [1] to the centos element
(cloud image). Users should set DIB_RELEASE=8-stream.

[1] https://www.centos.org/stream/

Change-Id: Ib8f542031c46326ffed812fa60cbc9e56db9d6fd
2020-08-10 11:33:38 +02:00
Jeffrey Zhang
581ffa023b Support non-x86_64 DIB_DISTRIBUTION_MIRROR variable for CentOS 7
Other architectures are stored under "altarch" for CentOS 7, update
the match.

Convert the delimiters to "," to avoid a subtle problem with "|" --
POSIX states

  Within the BRE and the replacement, the BRE delimiter itself can be
  used as a literal character if it is preceded by a backslash.

So "s|\(foo\|bar\)|moo|" doesn't do what you might think; the inner
pipe becomes a literal | and this will *not* match "foo" or "bar".

Change-Id: Ic1642325e3a59a10453c356d8d839ce649812af8
2020-07-20 10:33:01 +10:00
Ian Wienand
56dc0a2c31 centos 8 image build: fix mirror
We're ending up with "centoscentos" in the mirror location and the
build fails; strip out the $contentdir from the original too.

Change-Id: If09dbbd8028ea510d2ab0d3d8afe484cea611df5
2020-03-31 08:57:15 +11:00
Carlos Goncalves
8226384cf0 Add CentOS 8 support
* Add "centos" element, a CentOS version-independent element. This is in
  line with the same work done for RHEL in Stein cycle.
* Deprecate the centos7 element. CentOS 7 support itself it not
  deprecated though. The new "centos" element provides the same support
  level as the "centos7" element.
* Add functional testing

The default CentOS version is 8. You can adjust it using the DIB_RELEASE
environment variable.

Change-Id: I373ba2296c4613765676e59aabd9c651345298d1
2020-02-19 10:44:56 +01:00
Ian Wienand
a00d02f6a1 Remove centos and rhel elements
Several people have popped up in IRC recently with failures in these
elements.  Without Python 2.7 available in the image they are
unsupported (OpenStack hasn't supported it for a long time).  Remove
these to avoid further confusion.

The centos/centos7 DISTRO split that has happened with centos-minimal
is unfortunate but I don't think it helps to rename centos7/rhel7 ATM.
To summarise; DISTRO=centos7 means image based build,
DISTRO=centos && DIB_RELEASE=7 means the minimal build.

In the future, I think it is important that the minimal builds and
image builds set the same DISTRO.  This reflects that "upper" layers
shouldn't care about the exact building of the lower layers.  I see
CentOS 8 going one of two ways

1) the changes are so significant, we start separate centos8 /
centos8-minimal elements.  They both set DISTRO=centos8 (and
DIB_RELEASE to point-release maybe?).  This means we have to update
all "if DISTRO == centos || DISTRO == centos7" branches to also check
for "centos8".  Evenually (!)  "centos" goes away for versioned DISTRO
only

2) we restore centos element with DISTRO=centos and DIB_RELEASE=8, and
centos-minimal remains the same.  This means we have to audit all "if
DISTRO == centos" calls to make sure they're appropriate for version 8
(stick a "&& DIB_RELEASE=7" on them all basically).

I'm not sure we can fully decide until we start to see excatly how the
distro switching/matching bits look, but (2) is consistent with Ubuntu
and probably the preferred solution.

Some "rhel" parts have been cleaned up.  More could be done in
rhel-common, but given our lack of coverage of that I'd prefer to
leave it for now.

Change-Id: I6ea784116ef59ca22878c8512c963f29c815a00a
2017-06-28 12:26:24 +10:00
Ian Wienand
3f8800832a Release 1.27.0
-----BEGIN PGP SIGNATURE-----
 
 iQEcBAABAgAGBQJYk8+9AAoJEBty/58O8cX8LdIH+wU/VrEVs0XYohiL6DUgabzs
 112U3UUihH5xMc/ca9Tarx+XwEvfMZkwYN2Qr0JoRJjmSt2AL6AezUhGSV+98vaY
 iQEccaFDFYlyDHm4V2r7N1xwS0B3mx87FPqVQQSUKlc3JsQxCy4o9RtD9aM8Gvqy
 +gAxMxL3p3O131K0Rvb0U5lC1FLgft9SuljCV8i5nU4/HdoryD6hedz2/ss8a9KG
 KKEdBKvPBKn73+nb8peQD/VXpej9C31r87q5VEjUsZkJ7gduY/qYLlGGgoBQqAXN
 WQ/ef1RkQKW5ba2jsjnk7fdOrA0+wYENxorR2WecuZbe2ieXw6fP3lYiD6VeWsM=
 =IUuh
 -----END PGP SIGNATURE-----

Merge tag '1.27.0' into merge-branch

Release 1.27.0

Change-Id: I9f6948636cae6d375d1d8315976504021f5a3bbb
2017-02-03 11:49:45 +11:00
Ian Wienand
97c01e48ed Move elements & lib relative to diskimage_builder package
Currently we have all our elements and library files in a top-level
directory and install them into
<root>/share/diskimage-builder/[elements|lib] (where root is either /
or the root of a virtualenv).

The problem with this is that editable/development installs (pip -e)
do *not* install data_files.  Thus we have no canonical location to
look for elements -- leading to the various odd things we do such as a
whole bunch of guessing at the top of disk-image-create and having a
special test-loader in tests/test_elements.py so we can run python
unit tests on those elements that have it.

data_files is really the wrong thing to use for what are essentially
assets of the program.  data_files install works well for things like
config-files, init.d files or dropping documentation files.

By moving the elements under the diskimage_builder package, we always
know where they are relative to where we import from.  In fact,
pkg_resources has an api for this which we wrap in the new
diskimage_builder/paths.py helper [1].

We use this helper to find the correct path in the couple of places we
need to find the base-elements dir, and for the paths to import the
library shell functions.

Elements such as svc-map and pkg-map include python unit-tests, which
we do not need tests/test_elements.py to special-case load any more.
They just get found automatically by the normal subunit loader.

I have a follow-on change (I69ca3d26fede0506a6353c077c69f735c8d84d28)
to move disk-image-create to a regular python entry-point.

Unfortunately, this has to move to work with setuptools.  You'd think
a symlink under diskimage_builder/[elements|lib] would work, but it
doesn't.

[1] this API handles stuff like getting files out of .zip archive
modules, which we don't do.  Essentially for us it's returning
__file__.

Change-Id: I5e3e3c97f385b1a4ff2031a161a55b231895df5b
2016-11-01 17:27:41 -07:00