This adds 9-stream support to the centos element.
See https://review.opendev.org/q/topic:cs9 for related patches.
Change-Id: Ib80fbd21edb77c25764eff2c0d66e55bde7a90af
As of grub2 >= 2.02-95 on redhat family distros, calling grub2-install
on an EFI partition will fail with: "this utility cannot be used for
EFI platforms because it does not support UEFI Secure Boot."
This version of grub is now in centos8-stream and non-eus repos of
RHEL-8. It is not currently possible to build whole-disk UEFI images
on these distros, and when this package is promoted this will also
affect centos8 and RHEL-8 eus. The grub maintainers made this change
because the grub2-install generated /boot/efi/EFI/BOOT/BOOTX64.EFI
will never be capable of booting with Secure Boot.
This change defines a $EFI_BOOT_DIR for every distro element. When
directory /boot/efi/$EFI_BOOT_DIR exists a grub.cfg file in will be
generated there. This change also installs the shim package on redhat
family distros, which installs a copy of the shim bootloader to
/boot/efi/EFI/BOOT/BOOTX64.EFI. Using centos as an example, this
allows UEFI to boot the shim /boot/efi/EFI/BOOT/BOOTX64.EFI which
then chains to /boot/efi/EFI/centos/grubx64.efi.
If /boot/efi/$EFI_BOOT_DIR doesn't exist (such as for Ubuntu,
/boot/efi/EFI/ubuntu) the current behaviour of running grub-install to
generate /boot/efi/EFI/BOOT/BOOTX64.EFI will continue. For distros
such as Ubutnu where packaging does not populate /boot/efi/EFI/ubuntu
with .efi files, secure boot can be added in the future by copying
.efi files to /boot/efi/EFI/ubuntu and copying the shim file to
/boot/efi/EFI/BOOT/BOOTX64.EFI.
Change-Id: I90925218ff2aa4c4daffcf86e686b6d98d6b0f21
The python3/python3-pyyaml packages both are never installed and dnf
itself never updated when $DIB_DISTRIBUTION_MIRROR set and used.
This change fix the order of the operations:
1. yum/dnf configure.
2. *.repo patching.
3. yum/dnf update/install execution.
Change-Id: Ifbbf1f0190fe8c8a77fb3be820e8056447e755f6
Signed-off-by: Maksim Malchuk <maksim.malchuk@gmail.com>
The trvial fix allow override to work in air-gapped envirments where
the command 'curl -s https://cloud.centos.org/...' would fail.
Change-Id: I84296d8816042e4cd4cb02f15746b86d600d13d6
Signed-off-by: Maksim Malchuk <maksim.malchuk@gmail.com>
With Centos 8.3, centos-repos package has been replaced by
other packages [1].
[1] https://lists.centos.org/pipermail/centos-devel/2020-September/056069.html
Also Increase flake8 and pyflakes version in lower-constraints.txt as
this was already broken.
Change-Id: Ife139fcaff0c2d944098ea353259971d2d3f18b8
This patch adds support for CentOS 8 Stream [1] to the centos element
(cloud image). Users should set DIB_RELEASE=8-stream.
[1] https://www.centos.org/stream/
Change-Id: Ib8f542031c46326ffed812fa60cbc9e56db9d6fd
Other architectures are stored under "altarch" for CentOS 7, update
the match.
Convert the delimiters to "," to avoid a subtle problem with "|" --
POSIX states
Within the BRE and the replacement, the BRE delimiter itself can be
used as a literal character if it is preceded by a backslash.
So "s|\(foo\|bar\)|moo|" doesn't do what you might think; the inner
pipe becomes a literal | and this will *not* match "foo" or "bar".
Change-Id: Ic1642325e3a59a10453c356d8d839ce649812af8
DIB was retrieving the oldest cloud image file which, presently, means
retrieving CentOS 8.1 instead of CentOS 8.2. Even though DIB runs a
system update and so catches up to latest, this takes bandwidth, time
and final image space (8.1 + system update = 765M qcow2, vs 8.2 + system
update = 518M qcow2).
This patch fixes that by taking the first image name in a descending
order list.
Change-Id: I648fe19f1f76c03c97492b6ac7be6381f6f9261b
We're ending up with "centoscentos" in the mirror location and the
build fails; strip out the $contentdir from the original too.
Change-Id: If09dbbd8028ea510d2ab0d3d8afe484cea611df5
* Add "centos" element, a CentOS version-independent element. This is in
line with the same work done for RHEL in Stein cycle.
* Deprecate the centos7 element. CentOS 7 support itself it not
deprecated though. The new "centos" element provides the same support
level as the "centos7" element.
* Add functional testing
The default CentOS version is 8. You can adjust it using the DIB_RELEASE
environment variable.
Change-Id: I373ba2296c4613765676e59aabd9c651345298d1
Several people have popped up in IRC recently with failures in these
elements. Without Python 2.7 available in the image they are
unsupported (OpenStack hasn't supported it for a long time). Remove
these to avoid further confusion.
The centos/centos7 DISTRO split that has happened with centos-minimal
is unfortunate but I don't think it helps to rename centos7/rhel7 ATM.
To summarise; DISTRO=centos7 means image based build,
DISTRO=centos && DIB_RELEASE=7 means the minimal build.
In the future, I think it is important that the minimal builds and
image builds set the same DISTRO. This reflects that "upper" layers
shouldn't care about the exact building of the lower layers. I see
CentOS 8 going one of two ways
1) the changes are so significant, we start separate centos8 /
centos8-minimal elements. They both set DISTRO=centos8 (and
DIB_RELEASE to point-release maybe?). This means we have to update
all "if DISTRO == centos || DISTRO == centos7" branches to also check
for "centos8". Evenually (!) "centos" goes away for versioned DISTRO
only
2) we restore centos element with DISTRO=centos and DIB_RELEASE=8, and
centos-minimal remains the same. This means we have to audit all "if
DISTRO == centos" calls to make sure they're appropriate for version 8
(stick a "&& DIB_RELEASE=7" on them all basically).
I'm not sure we can fully decide until we start to see excatly how the
distro switching/matching bits look, but (2) is consistent with Ubuntu
and probably the preferred solution.
Some "rhel" parts have been cleaned up. More could be done in
rhel-common, but given our lack of coverage of that I'd prefer to
leave it for now.
Change-Id: I6ea784116ef59ca22878c8512c963f29c815a00a
The dib-run-parts element was copying our internal version of
dib-run-parts into /usr/local/bin to be used running scripts inside
the target chroot. However, it never cleaned up after itself. This
means all images were left with an unmanaged local install of
dib-run-parts.
This copies dib-run-parts into the hooks directory of the chroot and
runs it from there. It is cleaned up automatically on the exit path.
The dib-run-parts element is no longer required and it has been
removed from all dependencies. It is left with a deprecation notice
in the README. For compatability we convert it to simply install
dib-utils.
Codesearch shows no users depending on this unintentional implicit
install. Note os-refresh-config depends on dib-utils and thus will
have an explicitly installed version.
Partial-Bug: #1673144
Change-Id: Ia2e96c00a4246c04beb96c17f83b8aefb69219ca
Currently we have all our elements and library files in a top-level
directory and install them into
<root>/share/diskimage-builder/[elements|lib] (where root is either /
or the root of a virtualenv).
The problem with this is that editable/development installs (pip -e)
do *not* install data_files. Thus we have no canonical location to
look for elements -- leading to the various odd things we do such as a
whole bunch of guessing at the top of disk-image-create and having a
special test-loader in tests/test_elements.py so we can run python
unit tests on those elements that have it.
data_files is really the wrong thing to use for what are essentially
assets of the program. data_files install works well for things like
config-files, init.d files or dropping documentation files.
By moving the elements under the diskimage_builder package, we always
know where they are relative to where we import from. In fact,
pkg_resources has an api for this which we wrap in the new
diskimage_builder/paths.py helper [1].
We use this helper to find the correct path in the couple of places we
need to find the base-elements dir, and for the paths to import the
library shell functions.
Elements such as svc-map and pkg-map include python unit-tests, which
we do not need tests/test_elements.py to special-case load any more.
They just get found automatically by the normal subunit loader.
I have a follow-on change (I69ca3d26fede0506a6353c077c69f735c8d84d28)
to move disk-image-create to a regular python entry-point.
Unfortunately, this has to move to work with setuptools. You'd think
a symlink under diskimage_builder/[elements|lib] would work, but it
doesn't.
[1] this API handles stuff like getting files out of .zip archive
modules, which we don't do. Essentially for us it's returning
__file__.
Change-Id: I5e3e3c97f385b1a4ff2031a161a55b231895df5b
