I commonly get asked for help when people are attempting to create
local image elements and they cannot get them to work.
diskimage-builder silently ignores element scripts that it doesn't
find to it's liking, such as non-executable or files with extensions
(.sh is a common mistake).
This patch extends the '-x' tracing flag down to dib-run-parts and
will cause it to print out helpful messages when these files would
otherwise be silently ignored.
Examples:
Ignoring non-executable files: 10-do-not-run-me
Ignoring non-conforming filenames: 10-I-can-run.sh
I am not enabling these by default as they can create extra noise
and require additional filesystem IO to produce.
Change-Id: Ic804efca3015c199440b4b10da951d71a815c64f
When the rdisc6 utility is available probe for router
advertisement. configure eni and rhel-netscripts interfaces
to do IPv6 address configuration according to the flags
in the RA recived from the router.
The systemd service file timeout is DIB_DHCP_TIMEOUT * 2,
so that DHCPv4 can timout, and dhcpv6 run before the service
times out.
Retries are commented in dhclient.conf, without it we end up
trying DIB_DHCP_TIMEOUT * 60 before the client move on to
IPv6.
WHEN:
Stateful address conf. : No
Stateful other conf. : No
THEN:
Do not run dhclient at all, autoconfiguration via
SLAAC only.
WHEN:
Stateful address conf. : No
Stateful other conf. : Yes
THEN:
Run "dhclient -6 -S", The ``-S`` option makes the
dhcp client not request an address, only other
options such as DNS servers and NTP servers from
DHCPv6 server.
WHEN:
Stateful address conf. : Yes
Stateful other conf. : Yes
THEN:
The dhcp client should request an address _and_ other
options such as DNS servers and NTP servers from
DHCPv6 server.
NOTE: No IPv6 support added for suse-netscripts
Closes-Bug: 1754219
Change-Id: Icdc79875c33f894ab7eaec8afdfb33a731efff99
Currently DIB_ADD_APT_KEYS only supports GPG armor keys, while
default Debuntu apt gpg keys are in keyring format.
Change-Id: I361c375e25b03a08b19052b10c6733939c8df921
This reverts commit a3e9e7f89e.
We still have some issues with vhd creation on RAX
In short, it appears that images fail to resize unless they have a
specific "creator" field. Revert this while we consider the options.
[1] https://bugs.launchpad.net/nova/+bug/862653
Change-Id: I2b6a3bfbfe28432fbb6a2ce4a0211939d224b8d5
The "ironic-agent" is copied to ironic-python-agent-builder and
hence it is deprecated from DIB.
Remove from functional testing
Change-Id: Ibc4f75b9d7e2a31994fc86d05bd57975f00fb74f
Task: 36198
Story: 2005114
This package is not installed by default on Debuntu, but is on RH
platforms. This is causing a build breakage as DIB_PYTHON_VIRTUALENV
tries to use this (I3414fb9e503f94ff744b560eff9ec0f4afdbb50e).
Add the package.
Change-Id: I9a551c57dd128bbb4b095c847f634c777b2cb553
To ensure dracut does not load nouveau we need to explicitly disable it via
omit_drivers.
This change adds a method to drop in arbitary dracut conf files to an element
which are picked up by dracut-regenerate and included in the chroot where we
run dracut.
The disable-nouveau element just adds a conf file with
`omit_drivers += " nouveau"`
The default dracut conf files in /usr/lib include a similar file to omit the
nvidia kernel modules.
Change-Id: I6375e4843fd08d1410141fbbd8658042dcd5ad05
Closes-bug: 1842664
Seeing this at the end of the tripleo overcloud full build:
99-selinux-fixfiles-restore: line 69: [: too many arguments
Change-Id: I8fb10f3d3d38723b41190ae1898757e6df073945
The vhdutil utility is completely dead; the whole subsystem it relies
on was removed with [1] so it's not even vaguely possible to keep it
up-to-date.
I took the .raw images on a nb and used the qemu-img there (so Xenial)
and generated some VPC images; uploaded them to rackspace and the all
seemed to boot fine. If there was a problem, maybe it's been fixed on
either the qemu or RAX side in the previous few years.
Thus swith to qemu-img to generate the vhd images too.
[1] https://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=5c883cf036cf5ab8b1b79390549e2475f7a568dd
Change-Id: I3099d2ebb958370fcec623087a093b2c8dbdc6c4
Add option to set the suite subpath after the release name for the
security mirror URL independently in the debian-minimal element,
since this can differ between mirrors.
Change-Id: I4cc8f54fba012986423e30e19bff276208b8ad62
With the introduction of centos 8 we have constructs like
if [[ $DISTRO =~ (centos|fedora) && $DIB_RELEASE -ge 8 ]]
This is intended to match the "centos7" element (from the =~) but it
was missed that this is setting the DIB_RELEASE to "GenericCloud".
I think it makes more sense for this to be a numeric release, and
makes constructs like above work. There really isn't any other type
of image to choose here; thus we move it into a new, centos7
specific variable.
Note that when the centos 8 images are available, we want to move to a
generic "centos" element that will handle both 7 and 8 together (same
as rhel) based on DIB_RELEASE and deprecate centos7; this works with
that environment too.
Change-Id: I2e6b7848070d6452c0563e2a122447627c6e6bf7
It turns out that this breaks ipv6 config with NM. Instead what we want
is for glean to not up interfaces on boot (see the depends-on).
Change-Id: I6c5bc76c433e29f02d3266ab8f669015125ec954
Depends-On: https://review.opendev.org/#/c/688031
This adds CentOS 8 into functional and boot tests.
This completes centos-minimal support, documentation is updated and a
release note is added.
Change-Id: I435c2967b4f49faeb6d6edf189907b9f96e80357
As described inline, NetworkManager and dhcp-client make up the basic
networking for centos 8 installs; bring them into the base image.
Although in infra we then use simple-init, some other users find this
helpful.
Change-Id: Ib9f32e73bf9109cc1b659fe1deceb1a15301ffeb
By default network-scripts package isn't installed, so the directories
for these files don't exist either. Skip by default for Centos 8.
Change-Id: I194ec3735e17f27e586386541dc51f775b01e510
Use the wrapper calls from Ia267a60eecfa8f4071dd477d86daebe07e9a7e38
to install glean.
Using this wrapper means we cover all cases without more and more
branches; it should work for python2, python3 and also the special
case of RHEL/CentOS where dib-python points to the special
/usr/libexec/platform-python (which is python3.6 with inbuilt pip)
Change-Id: If624e8bb66ce0761fc0d5f34c2bed8b93a7daeee
NetworkManager with simple-init has proven to be stable in OpenStack
infra, switch to it by default for CentOS and Fedora. For CentOS 8
and Fedora, add a check to make it the only option. Thus only CenOS 7
remains optionally using the legacy scripts; this is likely not used
anywhere (infra is really the primary user, where NetworkManager is
already used); we can likely remove this variable (and hence path) in
a future cleanup.
In the setup, remove rhel7 element which was never really tested.
Reorganise the fallthrough to call out the default paths as doing
nothing.
Change-Id: Ic996956da4b85f7d95179b8df9881d5f52c091af
Currently, the serial console is hardcoded to ttyS0 in the bootloader
element. This is a challenge for users that want to build images for
some baremetal servers. Supermicro servers, for example, use ttyS1 for
the serial over lan interface.
This patch adds a new environment variable DIB_BOOTLOADER_SERIAL_CONSOLE
that can be set to override the default.
Change-Id: Ie8173be8690ac0b7164ce9e5b66d3c1c18f844d6
Add option to set the security mirror URL independently in the
debian-minimal element, since this can not be overriden by the
standard DIB_DISTRIBUTION_MIRROR variable.
Change-Id: I145844a410d06a479e68db1bf6d5d0159389305c
As described inline, deprecate the "source" install for CentOS 8.
Overwriting the packaged tools has long been a pain-point in our
images, and the best outcome is just not to play the game [1].
However, the landscape remains complicated. For example, RHEL/CentOS
8 introduces the separate "platform-python" binary, which seems like
the right tool to install platform tools like "glean" (simple-init)
with. However, platform-python doesn't have virtualenv (only the
inbuilt venv).
So that every element doesn't have to hard-code in workarounds for
these various layouts, create two new variables DIB_PYTHON_PIP and
DIB_PYTHON_VIRTUALENV to just "do the right thing". If you need is
"install a pip package" or "create a virtualenv" this should work on
all the platforms we support. If you know more specifically what you
want (e.g. must be a python3 virtualenv) then nothing stops elements
calling that directly (e.g. python3 -m virtualenv create); these are
just helper wrappers for base elements that need to be broadly
compatible.
[1] http://lists.openstack.org/pipermail/openstack-infra/2019-September/006483.html
Change-Id: Ia267a60eecfa8f4071dd477d86daebe07e9a7e38
Don't install the "yum" package, which is a backwards compat around
dnf. With 687003f we should not need the backwards compat links any
more.
Add libcurl to avoid conficts with in the curl "-minimal" packages
that happens on CentOS 8. But skip it on Fedora, because it seems to
create more problems there (not going to pretend it isn't all a
hack ... but it seems to work).
Change-Id: I1de2703eb5075a0a22837b6898bd8eb960d080dd
A few places we either assume centos uses "yum" directly, or have
switching based on the distro type.
In both cases, we can use ${YUM} directly to avoid ambiguity
Change-Id: I71095a9bd1862f8956b5982fbbb3e1d213926c14
The libselinux packages etc don't exist for Python 2 on Centos 8 [1].
Ensure the package map installs the python3 versions.
We could probably invert the logic now, and make it so Centos 7 is the
"special" version that overrides things to install python2. Left
alone for now to avoid changing too much at once.
[1] https://bugs.centos.org/view.php?id=16458
Change-Id: I944cf4f2902c28728aa5bb9e2a00b3eef122d52e
CentOS 8 has the "new" split-up locales packages. Fedora 24 is now
long gone, so take out the old branch and apply the lang package
install to Centos 8 as well.
The manual locale cleanup is not necessary on Centos 8; skip it.
Change-Id: Ib65fc15fe471348793fd6efb034517f11abd905e
The repo format has slightly changed for CentOS 8 (s/os/baseos/).
Make the chroot builder look for a more specific repos.d directory
first named for the distro variable, then fall back to to top-level
dir (this avoids having to constantly change fedora).
Update the gate mirror setup and roles for new Centos 8 paths too.
Change-Id: I5b7f0c3624cac1d7aa7ed8bf6286b85d808b9c9a
This is no longer a valid option for dnf, and it puts out a lot of
warnings constantly about the invalid entry [1]. Remove it.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1653831
Change-Id: Iba0585cab3e5e78e9324196f276b2341e7bb9e3c
Install the Python 3 libselinux packages for Fedora platforms. I
think this is the right choice; Fedora is a Python-3 only distro so we
shouldn't default to installing the python2 libraries.
This has a practical effect if you're using Ansible with
ansible_python_interpreter=/usr/bin/python3 as it needs these
packages.
There is some small chance of breakage if you're using Ansible still
with Python 2, I guess. In infra I notice we bring this in with
"zuul-worker" project-config element. On balance, I think that if you
need the Python 2 packages for some reason, it should be a special
install and not part of redhat-common.
Change-Id: Ibcec0b3660d01b861838c2ae87ca43d98953ce32
Two bugs are addressed.
1) The sysprep element was broken in that it only truncates
/etc/machine-id, but not /var/lib/dbus/machine-id. systemd will
not generate a new machine-id if /var/lib/dbus/machine-id is
present[1], it will simply copy it to /etc/machine-id.
We observed machine-ids being packaged in /var/lib/dbus/machine-id
on several distros: Ubuntu Bionic, Fedora 29, Debian Stretch.
CentOS 7 and Ubuntu Xenial do not contain packaged machine-id as
far as I can tell.
All test builds were performed using -minimal elements.
2) A second bug existed where debian-minimal did not run the sysprep
element at all, so a stretch image I tested contained a populated
/etc/machine-id AND a populated /var/lib/dbus/machine-id.
[1] https://www.freedesktop.org/software/systemd/man/machine-id.html#Initialization
Change-Id: Ibb28b6e90d966a845de38a2cd5a1e8babd2604bc
Similar to https://review.opendev.org/#/c/663693/, the x64 packages
should be used for x86 architectures.
Change-Id: I5e8a4d58e96d65eb60fc539b8a1d56853b12faac
Closes-Bug: 1843820
linux-firmware and linux-firmware-whence (meta package for mostly iwl
firmwares) packages account for approx. 289 M install size on a F30
system, and linux-firmware for approx. 176 M on CentOS 7. Users needing
these firmwares are eventually baremetal users and are not looking for a
very minimal operating system base install like virtual image users are.
Thus, a non-minimal OS element is better suited for them. Alternatively,
it could be later considered a dedicated firmware element.
This is inline with I8ce65e1d357d15e8ed8995ad1dcaea02bbd1986f.
Change-Id: If104fc3c1e9349b8d501a2351fff1ab4c0dbc6a4
This is consistent with the previous simplication of
build targets in the opendev environment to refer to
"opensuse15" being the alias of "latest stable openSUSE Leap 15.x".
Change-Id: I904a3ca0d6dbddd2bb1a673836ab6a0ad249526d
Add a new environment variable $DIB_GZIP_BIN allowing builders to
specify a different gzip (such as pigz) to be used when compressing
tgz images.
Change-Id: Ifb617568140a149e2fda241e07ff8a59429e6697
We have an application breaking because /usr/share/cracklib is being
deleted from the image. The application installs its dependencies,
including cracklib, but since yum shows that cracklib is already
installed, it does not reinstall it.
Change-Id: Id6fccf76c706dbc6c2124abcfd12c1f10cef5e09
Newer openSUSE distributions install an absolute link to /run/netconfig
as /etc/resolv.conf in $TARGET_ROOT. as that points outside
TARGET_ROOT, we unintentionally wipe the system resolv.conf here
and break our ability to finish building the image.
Change-Id: I9d5aaa9fad2f81dcabfe19e2f1e6b6e50af597d7
This is a follow-on to I475a253091cbaf63687b91c748c31a6753bb0f57 as we
are still seeing issues on some clouds with unconfigured networking.
We increase the timeout, but also make it configurable so we can
fiddle it without a dib release in the gate.
To follow-on from the experimentation done by clarkb, I can confirm by
emperical testing on a Centos 7 image (from today, today being this
change's date) that setting
net.ipv6.conf.all.autoconf=0
by itself is "fatal" and the interfaces do not come up; i.e. nm does
not by default seem to re-enable ipv6 for the interface. However,
explicitly adding:
IPV6INIT=yes
IPV6_AUTOCONF=yes
to the interface file *does* seem to make it work, even if
"all.autoconf=0" is set (then again, there's also bugs about the
effect of this [1]). However, no extant distribution (I can currently
find) does anything like this by default.
If this continues, this may be an option. Another might be to avoid
the use of the nm-settings-ifcfg-rh profiles and move directly to nm
ini files with glean.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=11655
Change-Id: I869ebffc8cde3bbff573f6583fd9dd02a5598590
Upstream is now publishing 17.1 profile systemd stages
Also updates the docs that were forgotten in the last patch
Change-Id: I0f2e7976845b1d3c55ffe8869eec0bc04a191252
As described inline, we need to ensure the underlying directories in
the image are correctly labeled, or we get all manner of services
failing during boot with selinux in enforcing mode. Although the
problem is generic, this first shows up in Fedora 30 as systemd has
become more strict about namespace failures (I think) [1].
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1663040#c22
Change-Id: I52c1cc719884879169b606b00651aa26f5b783f1
This patch adds option DIB_YUM_MINIMAL_EXTRA_REPOS to yum-minimal to
allow DIB users to include extra repositories to their final image.
Change-Id: I89549f4b0f4c9470143b5064817acab5043e31c5
Something (possibly [1], but that change is at best cryptic) has
changed such that we don't get correct /etc/os-release files
installed. This flows on to grub half-installing itself, enough to
not fail the build but not enough to make something bootable.
Installing the -cloud release package gets it back, and seems like a
sane choice for dib.
[1] 617b1bed34
Change-Id: Iff0413887fad798273b2bfcb140cc07f36d54a04
As noted in the change, 7fd52ba841
increased the size of the EFI partition considerably. This has meant
that our padding upwards of the disk size is insufficient and EFI
builds (arm64 in particular) is failing due to out-of-disk errors
during final image operations like installing kernels.
Similar to the discussion we had in
I65fa13a088eecdfe61636678578577ea2cfb3c0c, this feels a bit ugly
because we're mixing logic here with sizes specified in block-device
config files. But it boils down to the same problem; we are
calculating the disk size here and passing it to the block-layer, so
unless we want to make large changes to the status quo about where
these sizes are calculated, small adjustments here are the most KISS
solution.
Thus we check if we have selected the EFI bootloader element, and thus
assume there will be a large system EFI partition and expand the disk
size accordingly.
Change-Id: Ifa05366c2f2b95259f3312e4dde8c85347075ba1
This debug statement lists every element found and its dependencies on
every build; it's just noise unless you're debugging the element
dependency solver itself. Remove from output.
Change-Id: I9281b953d958a3fd5e20edbc560a341a2fcc3deb
This seems to miss the exit code of the dracut process, which actualy
caused some issues in I8511669e188717494daf2bc1384a6dd346f942a4 where
it would have been much clearer to stop after the initramfs generation
failed.
Add some debug messages, and catch any errors from the final call.
Change-Id: I6f89441ec4709f5199535e15a7cc53a3a8af273d
Should install "grub2-efi-aa64 grub2-efi-aa64-modules" instead of
"grub2-efi grub2-efi-modules" for arm64
Change-Id: Iee3191b0944b3b862890d166a9d36bd592fe8f7e
Closes-bug: #1839816
- DIB_DISTRIBUTION_MIRROR_UBUNTU_IGNORE matches when it is empty or not
set and DIB_DISTRIBUTION_MIRROR is being used. Checking for it being
set and not empty solves this.
- Normalizing bash conditionals for readability
Closes-Bug: #1808359
Change-Id: I87853fcda4c8b29a3f1720a2778debeb3acc3a53
Signed-off-by: Manuel Torrinha <manuel.torrinha@tecnico.ulisboa.pt>
The 'pypi' mirror element is generating invalid pip.conf files
when more than one "DIB_PYPI_MIRROR_URL" is specified.
This patch fixes the pip.conf file rendering to use a proper form
when there are multiple "extra_index_url" provided.
Closes-Bug: #1839558
Change-Id: Ibda0e7390955683560e09b486f636775643ff57c
python 3.6 warns about regexes like:
DeprecationWarning: invalid escape sequence \+
I noticed that debugging a trove job and it really led me in the wrong
way. Fix this with making it a raw string.
Change-Id: I58ee1a49d62316c6c3f0588832c97f659f7e460b
Per the inline comment, a machine-id is required for kernels to
install correctly (this may well be a bug, but the linked issue
remained inconclusive).
Add a call to make the machine-id before install packages.
Change-Id: If75d04376e62bfdfe14ee3ca4d0bd5c8b383c1b0
Redhat-Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1737355
The 17.1 profile changed the defaults used in portage for where we store
our repo, distfiles and binpkgs. Some portage related variables need to
be set deterministically. 17.1 is no enabled for Systemd's profile.
Change-Id: Ib55f6875c5cb461c3c530b51d7420ce3dc8da360
This element configures systemd to send its journal to the console,
which can then be retreived by server commands. In the case of
nodepool, if the image failed to boot the console will be dumped into
the logs when nodepool decides the node is not responding. Having
this can be very helpful diagnosing early boot errors.
Needed-By: https://review.opendev.org/#/c/669787/
Change-Id: I6b6df7023acb6b2f967b84840bc4b542ebc03727
Newer versions of open-iscsi seem to compile on Gentoo / musl. Use them
if we can. This also removes the cap on open-iscsi.
Change-Id: I596cb61494e459a419bce6a63deff89f9e78fe23
Previously we were trying to enable dbus-daemon service on all prior to
fedora 30. Unfortunately 28 and older don't have this service so this
broke those releases and only worked for 29. Fix this by only enabling
this service on fedora 29.
Change-Id: I1bd15dcf0bbe270afccb0c0c3ea6ad08862a53f1
The linux kernel and NetworkManager fight each other over control for
interface management when router advertisements are in use. Long story
short if the linux kernel configures a network interface for ipv6
before NetworkManager attempts to manage that interface then NM will
ignore the interface and not configure ipv4 on it.
This can happen because the kernel is configured to send router
advertisements solicitations which result in router advertisements which
the kernel uses to configure the interface(s). There is a default of a 1
second delay before sending the solicitation which in many cases is long
enough that NM has started before then. However, in slower environments
like those used for testing with qemu this isn't long enough.
Some testing by hand indicates that 15 seconds is about right so
increase the delay to 15 seconds via sysctl.conf.
Note this may increase boot times in ipv6 only environments (though it
is hard to be sure due to how systemd starts everything at once and does
socket activation and the like).
Change-Id: I475a253091cbaf63687b91c748c31a6753bb0f57
When virtualenv and setuptools gots installed from source and rpm
then their installation path lives at different places but when
the python script got called then that time it choses either of
rpm or source based path on system wide installation and leads to
different failure as their methods are not implemeted.
So by setting _clear_old_files to 0 will install
python3-virtualenv python3-pip python3-setuptools from rpms only
and avoid these failures.
Change-Id: I0c162f1fe8168513e352546ab8dd2b68fa65b88c
Signed-off-by: Chandan Kumar (raukadah) <chkumar@redhat.com>
autounmask=y (default) changes portage depsolving, causing errors
(mostly often seen in perl and binpkg related issues).
Disabling this functionality for DIB builds is OK as the enviroment is
not passed on post build and the build process is not interactive
anyway.
Change-Id: Ife9ace246bec16864ee4982bc456763af5dff2e8
Signed-off-by: Matthew Thode <mthode@mthode.org>
debian-minimal depends on debootstrap which depends on dpkg
This needs to be installed early as dpkg installs the apt keys early via
02-add-apt-keys in pre-install.d
Change-Id: I8580849ceaa7a5152c94f29afa890ac6d6983fb1
This change removes useless statement accidentally added in the
06576a02f0
Change-Id: I7ea4a24d8c72c9e72f5f87247403af0f9bf69b40
Signed-off-by: Maksim Malchuk <maksim.malchuk@gmail.com>
There are several jobs depending on working opensuse 15.1
images in nodepool, so it makes sense to ensure its working.
Also upgrade the previously marked experimental opensuse-15.0
job as it tests the xenial->opensuse combination, which is
particularly difficult to keep working and we'll need it in
the CI.
Change-Id: Icb6d998756ce5221e017959dcb59b21f0f023454
This patch adds a new environment variable to the ubuntu-minimal
element called DIB_UBUNTU_KERNEL that allows you to specify the kernel
meta package that will be using to install the kernel inside the image.
It supports "linux-image-generic" (The default), "linux-image-kvm", and
"linux-image-virtual".
This allows building images that are smaller in size (~200MB smaller
qcow2) that have only the kernel modules necessary for virtual
machines.
Change-Id: I8ce65e1d357d15e8ed8995ad1dcaea02bbd1986f
1. Sync sphinx dependency with global requirements. It caps python 2 since
sphinx 2.0 no longer supports Python 2.7.
2. Update some URLs to latest
3. Remove the unnecessary space
Change-Id: I5464be9e055feecd80918f691448acf5f100e701
Use openSUSE 15.1 as default, which is the latest released stable
openSUSE release.
Remove leftovers for unmaintained openSUSE 42.2 images.
Depends-On: https://review.opendev.org/#/c/660126/
Change-Id: I0b204b7b3d7ae74b6749320b3bfe1ca89d154ebb
This patch removes the check and default for rhel 8 requiring
xfs filesystem as rhel 8 images can successfully be built with
ext4 filesystems.
Change-Id: I1a6bfa26324fd43ae0c77c2c977dda0dd56e26e5
Nowadays, in the time of Predictable Network Interface Names, the
network interface names 'ethX' are not used that often any more.
Depending on the virtualization layer and the guest OS names like
'ens3', 'enp1s0' or 'enp0s31f6' are used.
This patch enables the user to set DIB_NETWORK_INTERFACE_NAMES to a
list of network interfaces which are brought up using DHCP during
(first) boot.
Change-Id: I04cc2ee710f0389a8085b1c91d9329784cb28048
Signed-off-by: Andreas Florath <Andreas.Florath@telekom.de>
The latest Fedora/Ubuntu images don't ship python2 by default, so we
need to use our dib-python wrapper for this so we work in python3 only
environments.
This change also correctly creates the pip.conf and .pydistutils.cfg
files with trusted host extracted from the index-url.
Related-bug: 1577105
Change-Id: Ibb5348af3e3bbe46b19affe90a8930a4b4ad4cad
Signed-off-by: Maksim Malchuk <maksim.malchuk@gmail.com>
RHEL8 ships a bunch of grub2-efi-X-modules in its main
repository, each of which provides grub2-efi-modules,
potentially causing nondeterminism when building images.
This changes the DIB elements to always use architecture-
specific RPMs when RHEL8 is selected.
Change-Id: If94f3721195d5ecd80036e4234a3ca223a19c349
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1716672
When I said in I8594d1fe05242f246a5809740a115ab2f84ac5a3 that 12 MiB
ought to be enough, I should have expected that I would be proven wrong.
While 12 MiB is enough to fit shim-x64 and grub2-efi-x64, yum fails to
update these packages to newer versions:
Transaction check error:
installing package shim-x64-15-2.el7.centos.x86_64 needs 7MB on the /boot/efi filesystem
installing package grub2-efi-x64-1:2.02-0.76.el7.centos.1.x86_64 needs 3MB on the /boot/efi filesystem
Error Summary
-------------
Disk Requirements:
At least 7MB more space needed on the /boot/efi filesystem.
It is recommended that the ESP partition be much bigger. This commit
bumps its size to 550MiB, following guidelines from Rod Smith to avoid
incompatibilities with some EFIs [1].
[1] https://www.rodsbooks.com/efi-bootloaders/principles.html
Change-Id: If9515234f1a803cda32b2482f8abe10ddf0e6d26
Avoids failing on the first attempt to download the image to cache as
mirrors hosting them can randomly go down, usually with a connection
refused.
Change-Id: I9de9f33c2cc16596d04b35c4eb92621e6a2c7511
When the mirror returns a error, it was trying to interpret the error
message (e.g. <html><title>Internal server error..) as a download link.
By using -f on curl we get an empty reply and an exit code, which, as
we run in set -e mode, aborts.
Change-Id: Ibaa39aedb7db286f859c4b090114c6a233b150c7
The rhel7 element is deprecated and is left only for backward
compatibility.
The rhel element should be used instead. Users should set DIB_RELEASE to
'7' to indicate which release you are using.
The new element is a version-less RHEL element to handle both '7'
and '8' DIB_RELEASE, which aligns with other elements which operate in
the same way such as the Fedora element.
Change-Id: Ic39ed85cacae9942448eb18ad685763f9369c2ed
Make a version-less RHEL element to handle both '7' and '8' DIB_RELEASE.
The element usage should align with other elements which operate in the
same way such as the Fedora element.
Additionally, this patch adds support for RHEL8 that operates with
Python 3.
As of now, users of diskimage-builder will still be able to use the
'rhel7' element, or migrate to 'rhel' and specify their respective
DIB_RELEASE value.
* mount the xfs file-system for extraction as read-only. vaguely
based on explaination in [1] and the fact we only read the image
data into a tar, so can ignore this.
XFS (dm-1): Superblock has unknown read-only compatible features (0x4) enabled.
* Use the redhat system python as the dib-python version. dib was
ahead of it's time making an abstracted python interpreter for
system work ;) the system python should work for running the various
dib element scripts.
[1] https://unix.stackexchange.com/questions/247550/unmountable-xfs-filesystem
Redhat-Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1700253
Co-Authored-By: Ian Wienand <iwienand@redhat.com>
Change-Id: I90540675c70bb475d9db2ae24f81c648a31f3f95
I want to use the new --image-extra-size flag[1] but my use-case
calls for megabyte granularity of this value. Rather than adding
60% to an 800MB image, maybe I only want to add 100 or 200MB, etc.
[1] https://review.opendev.org/#/c/655127/
Change-Id: I8fb9685d60ebb1260d5efcf03c5c23c561c24384
Use openSUSE 15.0 as default, which is the latest released stable
openSUSE release. Switch to https for accessing download.o.org
as encrypted transfers should be used by default.
Remove leftovers for definitely unmaintained openSUSE 13.x images
and split into old/new leap style versioning scheme for clarity.
Change-Id: Iab129eeee2b1a2563f0f0d2cb17bbad57c068e38
It looks like fedora-release on fedora 30+ has been split into sub
packages. Use fedora-release-common to avoid package conflicts.
Change-Id: I8f8711044fc4074b91939e0a6dfdac4d7a14a35b
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
In fedora-30 is when we migrate to dbus-broker, fedora-29 is still using
dbus-daemon.
Change-Id: I1e1d3a3826157b8b22386c211eaa58b6439b5f3c
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
Depending on the version of $DIB_PYTHON_VERSION, we can either use pip /
pip3 to install glean. This is helpful for newer OSes that might not
want to ship python2 (pip).
Change-Id: I25c5927a1eb55ee16b919dd64403184f335839b6
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
Harden sshd configuration by adding KexAlgorithms, Ciphers and MACs for sshd,
following good pratices on https://infosec.mozilla.org/guidelines/openssh
Change-Id: I3051320d867a5033e82deef10c5e723ca9829884
Co-Authored-By: Nicolas Hicher <nhicher@redhat.com>
Currently diskimage-builder supports two ways to specify the image
size. One is defining a fixed image size using DIB_IMAGE_SIZE, the
other one is auto-detection while adding a security margin of 60% as
free space. This means when building larger images (e.g. >100GB) with
unknown size upfront we end up with much wasted space, IO and network
traffic when uploading the images to several cloud providers. This can
be optimized by adding a third way by defining DIB_IMAGE_EXTRA_SIZE to
specify the free space in GB. This makes it possible to easily build
images of varying sizes while still minimizing the overhead by keeping
the free space constant to e.g. 1GB.
Change-Id: I114c739d11d0cfe3b8d8abc6df5ff989edfb67f2
In many cases, the statically sized 64MB journal is far below the
e2fstools default calculation[0] which calls for a 64MB journal only
on filesystems smaller than 16GB. On bare metal in particular, the
correct default journal size will often be in the 512MB-1GB range.
Since we cannot know what the target system is, this should be a
tunable parameter that the user can set depending on the intended
image usage.
Add a DIB_JOURNAL_SIZE envvar and --mkfs-journal-size parameter
to the image creation so users can override the default journal
size.
[0] https://git.kernel.org/pub/scm/fs/ext2/e2fsprogs.git/tree/lib/ext2fs/mkjournal.c#n333
Change-Id: I65fa13a088eecdfe61636678578577ea2cfb3c0c
Due to the referenced bug, many versions of debootstrap can't bring up
a buster environment. Unfortunately, these include versions we use to
do this on Xenial/Bionic nodes.
Also, there isn't backports or security updates, so elide these for
now.
I did get a working build (I haven't gone so far as a full boot+glean)
with this, at least.
Change-Id: If2420e92cb728ab6e91b0d70547da4483679b391
Paritial-Bug: #1822927
Currently, the cleanup script is using the existence of the folder
/sys/fs/selinux to check if SELinux is enabled. This, however, is
misleading in case disk-image-builder is used inside a Docker
container on a selinux-enabled host. In this case, the folder exists
in the container but SELinux is disabled.
This patch addresses the problem by checking, in addition to the
check already in place, the output of the command selinuxenabled.
Change-Id: I83e58f2467e60df9f0f00f7b7a58d0e2ce357a9a
Closes-Bug: #1820077
This is a mechanically generated change to replace openstack.org
git:// URLs with https:// equivalents.
This is in aid of a planned future move of the git hosting
infrastructure to a self-hosted instance of gitea (https://gitea.io),
which does not support the git wire protocol at this stage.
This update should result in no functional change.
For more information see the thread at
http://lists.openstack.org/pipermail/openstack-discuss/2019-March/003825.html
Change-Id: Id26bec14c3d94e2f81b2148fc85d17f07866398c
This is only one line, but it takes a lot to untangle ... basically
the current "correct" path is:
---
mk_build_dir()
-> sets trap trap_cleanup EXIT
... stuff ..
mount_proc_dev_sys
-> mounts $TMP_MOUNT_PATH/<proc,dev.sysfs>
pre-finalise.d
finalise.d
unmount_image $TMP_BUILD_DIR/mnt # nb == $TMP_MOUNT_PATH
-> unmount_dir()
-> recursive unmount everything inside TMP_MOUNT_PATH
TMP_IMAGE_PATH=$(dib-block-device getval image-path)
export TMP_IMAGE_PATH
dib-block-device umount
dib-block-device cleanup
... actually cleanup directories ...
---
Our current failure exit trap does:
---
dib-block-device umount
unmount_image
...
---
Note this is the *opposite* of what is done in the correct exit path.
In the failure case, if a script fails in the finalise stages it leads
to /proc, /sys, /dev etc. still being mounted inside the image; the
"dib-block-device umount" call doesn't know anything about these
mounts and tries to unmount the parent directory, and we get a hard
failure with a busy mount, and all the mounts are subsequently leaked.
Note that "unmount_dir", which is ultimately called by
"unmount_image", already knows to skip those mounts that
"dib-block-device umount" manages (this is the DIB_MOUNTPOINTS list).
This is further evidence it should be called *before* the
dib-block-device umount.
Change-Id: Ibef3ce9d1167b9c4ff3d5717b113cd3ed374f5e3
Add a DIB_APT_MINIMAL_CREATE_INTERFACES boolean to the debootstrap
element which functions identically to
DIB_YUM_MINIMAL_CREATE_INTERFACES in the yum-minimal element.
This can be used to disable the creation of the
/etc/network/interfaces.d/eth[01] dhcp configuration files, which
are not needed on systems where cloud-init or other means are used
to configure networking.
The flag is enabled by default to keep creating the dhcp interface
files, maintaining backwards compatibility.
Change-Id: I1fdaca8350a5ceefd9e437af4fd000ce6a3ee7f3
in same cases it is required to avoid update all existing packages,
doing so can result in release update which is currently not possible
unless you not include "base" element.
"base" element used for most distribution (rhel, debain), and is
necessary for most cloud operations, this patch add
"DIB_AVOID_PACKAGES_UPDATE" parameter to skip updating all packages.
usecases for this patch can be:
* Avoid release update when building old release ex. RHEL7.5.
* build on network-less environment.
usage:
DIB_AVOID_PACKAGES_UPDATE=1
or
DIB_AVOID_PACKAGES_UPDATE=0
Change-Id: I71192b23c8f0bc48b348fe7377bf8a2399b53792
Related to I041a141366099093805e6052b1bbf64efd277e1e, we also need to
remove this on opensuse. The files for gate testing are added, but
the test is not added to any jobs at this point in the interests of
gate time.
Change-Id: I1af9e84d76bedcb2607717edc6d2abe2920b0584
This fixes a regression in I041a141366099093805e6052b1bbf64efd277e1e
where we starting skipping the removal of old files for image-based
builds (confusingly named centos7 rather than centos for historical
reasons). Fix the check
Change-Id: I74688a9e91d833b5d654056431729bed0585616c
As described inline, we only want to remove the system package files
on centos; it causes problems on Fedora where some system tools expect
these to be there.
But there is an additional bug -- pip actually removes the system
package files anyway. To work around this, reinstall the system
package.
Closes-Bug: #1813232
Change-Id: I041a141366099093805e6052b1bbf64efd277e1e
As described in the comments, it seems the transition between
dbus-daemon -> dbus-broker in Fedora 29 has made it so the packages
can get into a state where neither service is enabled.
Explicitly install and enable dbus-broker for F29
Change-Id: I06753043a75be2f635653899c6c251b9fbdd7c67
The path $TMP_BUILD_DIR/mnt becomes the / inside the chroot during
the chroot phases of diskimage-builder. Previously this path was being
created using the account running diskimage-builder. This account may
not be valid inside the chroot. This causes path validation, when running
on a Ubuntu bionic host, to fail.
This patch chown's the $TMP_BUILD_DIR/mnt to root.root to make sure
that / is owned by a valid account inside the chroot.
Change-Id: Ifedc136baa67c7952942aed2c8cb1041902fef91
Closes-Bug: 1811113
There is an use of get_image_element_array on the environment.d
phase, for the iscsi-boot element.
This function is not available on that step. So moving the check
at next step, extra-data-d, where it is available.
Change-Id: I89cfe565492142c2f7962109360fcbcebadfd469
This plumbs through an "--use-nm" flag to glean which instructs it to
setup interface bringup with NetworkManager rather than legacy network
enablement scripts.
In this case, install the NetworkManager package. In the non-nm case,
also install the network-scripts for Fedora 29 -- this has stopped
being installed by default (it's been deprecated since forever).
As noted in the docs, this is currently really only relevant on the
supported rpm distros which are using the ifcfg-rh NetworkManager
plugin to effectively re-use old config files. However,
NetworkManager has similar plugins for other platforms, so support can
be expanded if changes are proposed.
Depends-On: https://review.openstack.org/618964
Change-Id: I4d76e88ce25e5675fd5ef48924acd09915a62a4b
Provide a "when" option that provides for not installing packages
based on a = or != match on an environment variable.
Unit tests are added.
Change-Id: Ifa824dccaff69fd447f45d54cb4a3083bcabdd86
It looks like we dropped running these probably when we moved the
elements around. For testtools to find the test scripts we need to
add the __init__.py files to make the directories look like modules.
Also prevent copying any .pyc or cache files in as hooks.
Change-Id: I66d5f6ee62cc4d9ee14c64e819b4db57d035d09f
This allows nodes with remote devices configured via iBFT to be
correctly used during Ironic introspection and deployment,
at least for non-multipath configurations.
The new element is added as a dependency for ironic-agent.
Change-Id: If3dac6504d26535593f12e851092065b688ef696
install-packages is running before install.d phase, there is a chance
that installing a package like "container-selinux" will failed the
build, moving "selinux-permissive" to run at pre-install stage make
more sense.
Change-Id: I32f988be725d4b385c3765c47a00cd57c53d7d71
Update builds to Fedora 29. Remove the openstack gate CI mirror
workaround for pre-28 versions as they're not building in the gate any
more.
Change-Id: Ia6a8ae8d66d69f6add39e571043328e7274ba26c
