CentOS 8 has the "new" split-up locales packages. Fedora 24 is now
long gone, so take out the old branch and apply the lang package
install to Centos 8 as well.
The manual locale cleanup is not necessary on Centos 8; skip it.
Change-Id: Ib65fc15fe471348793fd6efb034517f11abd905e
The repo format has slightly changed for CentOS 8 (s/os/baseos/).
Make the chroot builder look for a more specific repos.d directory
first named for the distro variable, then fall back to to top-level
dir (this avoids having to constantly change fedora).
Update the gate mirror setup and roles for new Centos 8 paths too.
Change-Id: I5b7f0c3624cac1d7aa7ed8bf6286b85d808b9c9a
This is no longer a valid option for dnf, and it puts out a lot of
warnings constantly about the invalid entry [1]. Remove it.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1653831
Change-Id: Iba0585cab3e5e78e9324196f276b2341e7bb9e3c
Install the Python 3 libselinux packages for Fedora platforms. I
think this is the right choice; Fedora is a Python-3 only distro so we
shouldn't default to installing the python2 libraries.
This has a practical effect if you're using Ansible with
ansible_python_interpreter=/usr/bin/python3 as it needs these
packages.
There is some small chance of breakage if you're using Ansible still
with Python 2, I guess. In infra I notice we bring this in with
"zuul-worker" project-config element. On balance, I think that if you
need the Python 2 packages for some reason, it should be a special
install and not part of redhat-common.
Change-Id: Ibcec0b3660d01b861838c2ae87ca43d98953ce32
Similar to https://review.opendev.org/#/c/663693/, the x64 packages
should be used for x86 architectures.
Change-Id: I5e8a4d58e96d65eb60fc539b8a1d56853b12faac
Closes-Bug: 1843820
linux-firmware and linux-firmware-whence (meta package for mostly iwl
firmwares) packages account for approx. 289 M install size on a F30
system, and linux-firmware for approx. 176 M on CentOS 7. Users needing
these firmwares are eventually baremetal users and are not looking for a
very minimal operating system base install like virtual image users are.
Thus, a non-minimal OS element is better suited for them. Alternatively,
it could be later considered a dedicated firmware element.
This is inline with I8ce65e1d357d15e8ed8995ad1dcaea02bbd1986f.
Change-Id: If104fc3c1e9349b8d501a2351fff1ab4c0dbc6a4
This is consistent with the previous simplication of
build targets in the opendev environment to refer to
"opensuse15" being the alias of "latest stable openSUSE Leap 15.x".
Change-Id: I904a3ca0d6dbddd2bb1a673836ab6a0ad249526d
Add a new environment variable $DIB_GZIP_BIN allowing builders to
specify a different gzip (such as pigz) to be used when compressing
tgz images.
Change-Id: Ifb617568140a149e2fda241e07ff8a59429e6697
We have an application breaking because /usr/share/cracklib is being
deleted from the image. The application installs its dependencies,
including cracklib, but since yum shows that cracklib is already
installed, it does not reinstall it.
Change-Id: Id6fccf76c706dbc6c2124abcfd12c1f10cef5e09
Newer openSUSE distributions install an absolute link to /run/netconfig
as /etc/resolv.conf in $TARGET_ROOT. as that points outside
TARGET_ROOT, we unintentionally wipe the system resolv.conf here
and break our ability to finish building the image.
Change-Id: I9d5aaa9fad2f81dcabfe19e2f1e6b6e50af597d7
This is a follow-on to I475a253091cbaf63687b91c748c31a6753bb0f57 as we
are still seeing issues on some clouds with unconfigured networking.
We increase the timeout, but also make it configurable so we can
fiddle it without a dib release in the gate.
To follow-on from the experimentation done by clarkb, I can confirm by
emperical testing on a Centos 7 image (from today, today being this
change's date) that setting
net.ipv6.conf.all.autoconf=0
by itself is "fatal" and the interfaces do not come up; i.e. nm does
not by default seem to re-enable ipv6 for the interface. However,
explicitly adding:
IPV6INIT=yes
IPV6_AUTOCONF=yes
to the interface file *does* seem to make it work, even if
"all.autoconf=0" is set (then again, there's also bugs about the
effect of this [1]). However, no extant distribution (I can currently
find) does anything like this by default.
If this continues, this may be an option. Another might be to avoid
the use of the nm-settings-ifcfg-rh profiles and move directly to nm
ini files with glean.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=11655
Change-Id: I869ebffc8cde3bbff573f6583fd9dd02a5598590
Upstream is now publishing 17.1 profile systemd stages
Also updates the docs that were forgotten in the last patch
Change-Id: I0f2e7976845b1d3c55ffe8869eec0bc04a191252
As described inline, we need to ensure the underlying directories in
the image are correctly labeled, or we get all manner of services
failing during boot with selinux in enforcing mode. Although the
problem is generic, this first shows up in Fedora 30 as systemd has
become more strict about namespace failures (I think) [1].
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1663040#c22
Change-Id: I52c1cc719884879169b606b00651aa26f5b783f1
This patch adds option DIB_YUM_MINIMAL_EXTRA_REPOS to yum-minimal to
allow DIB users to include extra repositories to their final image.
Change-Id: I89549f4b0f4c9470143b5064817acab5043e31c5
Something (possibly [1], but that change is at best cryptic) has
changed such that we don't get correct /etc/os-release files
installed. This flows on to grub half-installing itself, enough to
not fail the build but not enough to make something bootable.
Installing the -cloud release package gets it back, and seems like a
sane choice for dib.
[1] 617b1bed34
Change-Id: Iff0413887fad798273b2bfcb140cc07f36d54a04
As noted in the change, 7fd52ba841
increased the size of the EFI partition considerably. This has meant
that our padding upwards of the disk size is insufficient and EFI
builds (arm64 in particular) is failing due to out-of-disk errors
during final image operations like installing kernels.
Similar to the discussion we had in
I65fa13a088eecdfe61636678578577ea2cfb3c0c, this feels a bit ugly
because we're mixing logic here with sizes specified in block-device
config files. But it boils down to the same problem; we are
calculating the disk size here and passing it to the block-layer, so
unless we want to make large changes to the status quo about where
these sizes are calculated, small adjustments here are the most KISS
solution.
Thus we check if we have selected the EFI bootloader element, and thus
assume there will be a large system EFI partition and expand the disk
size accordingly.
Change-Id: Ifa05366c2f2b95259f3312e4dde8c85347075ba1
This debug statement lists every element found and its dependencies on
every build; it's just noise unless you're debugging the element
dependency solver itself. Remove from output.
Change-Id: I9281b953d958a3fd5e20edbc560a341a2fcc3deb
This seems to miss the exit code of the dracut process, which actualy
caused some issues in I8511669e188717494daf2bc1384a6dd346f942a4 where
it would have been much clearer to stop after the initramfs generation
failed.
Add some debug messages, and catch any errors from the final call.
Change-Id: I6f89441ec4709f5199535e15a7cc53a3a8af273d
Should install "grub2-efi-aa64 grub2-efi-aa64-modules" instead of
"grub2-efi grub2-efi-modules" for arm64
Change-Id: Iee3191b0944b3b862890d166a9d36bd592fe8f7e
Closes-bug: #1839816
- DIB_DISTRIBUTION_MIRROR_UBUNTU_IGNORE matches when it is empty or not
set and DIB_DISTRIBUTION_MIRROR is being used. Checking for it being
set and not empty solves this.
- Normalizing bash conditionals for readability
Closes-Bug: #1808359
Change-Id: I87853fcda4c8b29a3f1720a2778debeb3acc3a53
Signed-off-by: Manuel Torrinha <manuel.torrinha@tecnico.ulisboa.pt>
The 'pypi' mirror element is generating invalid pip.conf files
when more than one "DIB_PYPI_MIRROR_URL" is specified.
This patch fixes the pip.conf file rendering to use a proper form
when there are multiple "extra_index_url" provided.
Closes-Bug: #1839558
Change-Id: Ibda0e7390955683560e09b486f636775643ff57c
python 3.6 warns about regexes like:
DeprecationWarning: invalid escape sequence \+
I noticed that debugging a trove job and it really led me in the wrong
way. Fix this with making it a raw string.
Change-Id: I58ee1a49d62316c6c3f0588832c97f659f7e460b
Per the inline comment, a machine-id is required for kernels to
install correctly (this may well be a bug, but the linked issue
remained inconclusive).
Add a call to make the machine-id before install packages.
Change-Id: If75d04376e62bfdfe14ee3ca4d0bd5c8b383c1b0
Redhat-Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1737355
The 17.1 profile changed the defaults used in portage for where we store
our repo, distfiles and binpkgs. Some portage related variables need to
be set deterministically. 17.1 is no enabled for Systemd's profile.
Change-Id: Ib55f6875c5cb461c3c530b51d7420ce3dc8da360
This element configures systemd to send its journal to the console,
which can then be retreived by server commands. In the case of
nodepool, if the image failed to boot the console will be dumped into
the logs when nodepool decides the node is not responding. Having
this can be very helpful diagnosing early boot errors.
Needed-By: https://review.opendev.org/#/c/669787/
Change-Id: I6b6df7023acb6b2f967b84840bc4b542ebc03727
Newer versions of open-iscsi seem to compile on Gentoo / musl. Use them
if we can. This also removes the cap on open-iscsi.
Change-Id: I596cb61494e459a419bce6a63deff89f9e78fe23
