Currently, the cleanup script is using the existence of the folder
/sys/fs/selinux to check if SELinux is enabled. This, however, is
misleading in case disk-image-builder is used inside a Docker
container on a selinux-enabled host. In this case, the folder exists
in the container but SELinux is disabled.
This patch addresses the problem by checking, in addition to the
check already in place, the output of the command selinuxenabled.
Change-Id: I83e58f2467e60df9f0f00f7b7a58d0e2ce357a9a
Closes-Bug: #1820077
This is a mechanically generated change to replace openstack.org
git:// URLs with https:// equivalents.
This is in aid of a planned future move of the git hosting
infrastructure to a self-hosted instance of gitea (https://gitea.io),
which does not support the git wire protocol at this stage.
This update should result in no functional change.
For more information see the thread at
http://lists.openstack.org/pipermail/openstack-discuss/2019-March/003825.html
Change-Id: Id26bec14c3d94e2f81b2148fc85d17f07866398c
This is only one line, but it takes a lot to untangle ... basically
the current "correct" path is:
---
mk_build_dir()
-> sets trap trap_cleanup EXIT
... stuff ..
mount_proc_dev_sys
-> mounts $TMP_MOUNT_PATH/<proc,dev.sysfs>
pre-finalise.d
finalise.d
unmount_image $TMP_BUILD_DIR/mnt # nb == $TMP_MOUNT_PATH
-> unmount_dir()
-> recursive unmount everything inside TMP_MOUNT_PATH
TMP_IMAGE_PATH=$(dib-block-device getval image-path)
export TMP_IMAGE_PATH
dib-block-device umount
dib-block-device cleanup
... actually cleanup directories ...
---
Our current failure exit trap does:
---
dib-block-device umount
unmount_image
...
---
Note this is the *opposite* of what is done in the correct exit path.
In the failure case, if a script fails in the finalise stages it leads
to /proc, /sys, /dev etc. still being mounted inside the image; the
"dib-block-device umount" call doesn't know anything about these
mounts and tries to unmount the parent directory, and we get a hard
failure with a busy mount, and all the mounts are subsequently leaked.
Note that "unmount_dir", which is ultimately called by
"unmount_image", already knows to skip those mounts that
"dib-block-device umount" manages (this is the DIB_MOUNTPOINTS list).
This is further evidence it should be called *before* the
dib-block-device umount.
Change-Id: Ibef3ce9d1167b9c4ff3d5717b113cd3ed374f5e3
Add a DIB_APT_MINIMAL_CREATE_INTERFACES boolean to the debootstrap
element which functions identically to
DIB_YUM_MINIMAL_CREATE_INTERFACES in the yum-minimal element.
This can be used to disable the creation of the
/etc/network/interfaces.d/eth[01] dhcp configuration files, which
are not needed on systems where cloud-init or other means are used
to configure networking.
The flag is enabled by default to keep creating the dhcp interface
files, maintaining backwards compatibility.
Change-Id: I1fdaca8350a5ceefd9e437af4fd000ce6a3ee7f3
in same cases it is required to avoid update all existing packages,
doing so can result in release update which is currently not possible
unless you not include "base" element.
"base" element used for most distribution (rhel, debain), and is
necessary for most cloud operations, this patch add
"DIB_AVOID_PACKAGES_UPDATE" parameter to skip updating all packages.
usecases for this patch can be:
* Avoid release update when building old release ex. RHEL7.5.
* build on network-less environment.
usage:
DIB_AVOID_PACKAGES_UPDATE=1
or
DIB_AVOID_PACKAGES_UPDATE=0
Change-Id: I71192b23c8f0bc48b348fe7377bf8a2399b53792
Related to I041a141366099093805e6052b1bbf64efd277e1e, we also need to
remove this on opensuse. The files for gate testing are added, but
the test is not added to any jobs at this point in the interests of
gate time.
Change-Id: I1af9e84d76bedcb2607717edc6d2abe2920b0584
This fixes a regression in I041a141366099093805e6052b1bbf64efd277e1e
where we starting skipping the removal of old files for image-based
builds (confusingly named centos7 rather than centos for historical
reasons). Fix the check
Change-Id: I74688a9e91d833b5d654056431729bed0585616c
As described inline, we only want to remove the system package files
on centos; it causes problems on Fedora where some system tools expect
these to be there.
But there is an additional bug -- pip actually removes the system
package files anyway. To work around this, reinstall the system
package.
Closes-Bug: #1813232
Change-Id: I041a141366099093805e6052b1bbf64efd277e1e
As described in the comments, it seems the transition between
dbus-daemon -> dbus-broker in Fedora 29 has made it so the packages
can get into a state where neither service is enabled.
Explicitly install and enable dbus-broker for F29
Change-Id: I06753043a75be2f635653899c6c251b9fbdd7c67
The path $TMP_BUILD_DIR/mnt becomes the / inside the chroot during
the chroot phases of diskimage-builder. Previously this path was being
created using the account running diskimage-builder. This account may
not be valid inside the chroot. This causes path validation, when running
on a Ubuntu bionic host, to fail.
This patch chown's the $TMP_BUILD_DIR/mnt to root.root to make sure
that / is owned by a valid account inside the chroot.
Change-Id: Ifedc136baa67c7952942aed2c8cb1041902fef91
Closes-Bug: 1811113
There is an use of get_image_element_array on the environment.d
phase, for the iscsi-boot element.
This function is not available on that step. So moving the check
at next step, extra-data-d, where it is available.
Change-Id: I89cfe565492142c2f7962109360fcbcebadfd469
This plumbs through an "--use-nm" flag to glean which instructs it to
setup interface bringup with NetworkManager rather than legacy network
enablement scripts.
In this case, install the NetworkManager package. In the non-nm case,
also install the network-scripts for Fedora 29 -- this has stopped
being installed by default (it's been deprecated since forever).
As noted in the docs, this is currently really only relevant on the
supported rpm distros which are using the ifcfg-rh NetworkManager
plugin to effectively re-use old config files. However,
NetworkManager has similar plugins for other platforms, so support can
be expanded if changes are proposed.
Depends-On: https://review.openstack.org/618964
Change-Id: I4d76e88ce25e5675fd5ef48924acd09915a62a4b
Provide a "when" option that provides for not installing packages
based on a = or != match on an environment variable.
Unit tests are added.
Change-Id: Ifa824dccaff69fd447f45d54cb4a3083bcabdd86
It looks like we dropped running these probably when we moved the
elements around. For testtools to find the test scripts we need to
add the __init__.py files to make the directories look like modules.
Also prevent copying any .pyc or cache files in as hooks.
Change-Id: I66d5f6ee62cc4d9ee14c64e819b4db57d035d09f
This allows nodes with remote devices configured via iBFT to be
correctly used during Ironic introspection and deployment,
at least for non-multipath configurations.
The new element is added as a dependency for ironic-agent.
Change-Id: If3dac6504d26535593f12e851092065b688ef696
install-packages is running before install.d phase, there is a chance
that installing a package like "container-selinux" will failed the
build, moving "selinux-permissive" to run at pre-install stage make
more sense.
Change-Id: I32f988be725d4b385c3765c47a00cd57c53d7d71
Update builds to Fedora 29. Remove the openstack gate CI mirror
workaround for pre-28 versions as they're not building in the gate any
more.
Change-Id: Ia6a8ae8d66d69f6add39e571043328e7274ba26c
8 MiB is not enough when using the grub2 element with centos7 images,
which installs binaries from the shim-x64 and grub2-efi-x64 packages
under /boot/efi. 12 MiB ought to be enough for anybody.
Change-Id: I8594d1fe05242f246a5809740a115ab2f84ac5a3
In order to allow the simple preparation of base images which
can be used for LXC/nspawn machine containers, we add this
element.
Containers inherit a kernel from the host, so there is no need
to build a kernel into the image. All the element needs is a
base init system which, in this case, is systemd.
Change-Id: I45651de2aa1b19bdeee301094f0bdffdd0a3b45c
This finalises the ports of the legacy jobs to zuul native jobs.
The dib-setup-gate-mirrors role preconfigures the repo templates,
etc. for the openstack-ci-mirrors element.
The dib-functests role runs the tests as specified by dib_functests,
and can run under python2 or 3.
Change-Id: Ied67a31f0d31503d13eccad8662c29740c93f33e
I'm not really sure why I originally had --logfile also log to stdout
in I202e1cb200bde17f6d7770cf1e2710bbf4cca64c, but it seem
counter-intuitive (indeed, I just tripped myself up thinking that in a
devstack job "--logfile" would put the logs into a separate file and
avoid the stdout logging, and I wrote it!).
Make it so specifying a --logfile puts dib into quiet mode for stdout.
Explicitly overriding DIB_QUIET will allow both if someone wants that.
Change-Id: I3279c9253eee1c9db69c958b87a0ce73efc0be9b
It looks like epel-release switch from "mirrorlist" to "metalink"
(around release 7-10 Jun 2017 according to [1]). Update our rewrite
matching to handle this "metalink" as well.
Add epel element to the centos7 (image-based) build for testing too
[1] https://koji.fedoraproject.org/koji/buildinfo?buildID=978473
Add epel element so it's tested during the centos7 functional test.
Change-Id: I2d6d4c2ec47bc69d2f16c96b5045b05c435a1af9
While trying to get docker image pre-caching to work we couldn't get a
docker daeomon to run within the chrooted environment. However we got
docker running with the help of bwrap outside of the chrooted
environment. The only option so far for this is the block-device.d
phase. But this has the problem that it runs after the image size has
been calculated. This leads to broken builds if the docker images
being pulled are big.
This can be solved by adding a post-root.d phase that runs outside the
chroot but before the image size calculation.
Change-Id: I36c2a81e2d9f5069f18ce5b0d52c5f1c7212c3ae
This updates diskimage-builder to support current Fedora releases (27
and 28) and removes support for Fedora 26 which is EOL as of June
2018.
Change-Id: I602b22ed4d5397b39dc1eef67964f6fbdcd93060
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
We want to set DIB_EPEL_MIRROR for the epel element, which means we
need access to the CI mirror info script in the chroot. Copy it into
the temp directory with extra-data.d and update the environment file
to find it.
Change-Id: Ia12f0cbdeb194eef3155497ceb5ffc4a452aad76
When using the upstream cloud images with the "ubuntu" element, they
have universe and multiverse enabled which we don't mirror.
To use the infra mirrors as a DIB_DISTRIBUTION_MIRROR with this
element, we need to be able to skip redirecting to universe and
multiverse, and additionally enable insecure repos (as we don't gpg
sign our mirrors).
Add and document two new variables with the ubuntu element to do this.
This is then setup by the openstack-ci-mirrors element so that we use
local mirrors duing dib functional testing for the "ubuntu" element.
Change-Id: I6ffbde07fa0e103641ee5c5f9d9e854e5b2168dc
openssl/cryptography versions are updated/stable
musl profiles need newer versions of open-iscsi masked as upstream
doesn't want to work with multiple libcs
Change-Id: If5baf339516390ae332015928557c6bb734486c2
This is a lot of very low value noise in the logs as these iterate
through all the elements (often doing nothing). Turn it down and add
an echo so we just see what elements it is working on.
Change-Id: I0687de4722766189db9d4a7bd7d3cfb45d387b62
To facilitate this I've created two new environment variables to set
the environment and default options for package actions.
eval is needed for the export as it preserves quotes.
Change-Id: Ib03651ee8dacd48cd1c135afd57cd31101356056
Signed-off-by: Matthew Thode <mthode@mthode.org>
In exploring Gentoo caching, it was realised that we have no way to
bind mount the cache into the finalised image for the finalise.d
phases.
By adding a pre-finalise.d phase that runs outside the chroot, we can
mount outside things into the hierarchy at $TMP_BUILD_DIR/mnt which
are then seen by the in-chroot finalise.d phase.
This is similar to the pre-install phase
Change-Id: I9d782994843383ddf90f62c40498af9925fd9558
Some minor things after looking at these parts.
The dib-run-parts element doesn't do any of the copying any more, so
these comments are wrong.
The reason for the multiple mounts in the bind mount was non-obvious
to modern eyes (as util-linux has handled this for some time).
Formatting fix for the rst
Change-Id: Idb4c9ff32c49aced2c68a5c905bf7a8b2832a5a2
Currently there's more-or-less an assumption that a kernel is
installed, so module blacklists are simply echoed into the modprobe
blacklist. This may not be the case with some ongoing container work.
Although we don't need to blacklist modules for containers, it also
doesn't hurt. Move the debootstrap element to the new modprobe
element, and allow it to create the blacklist directory.
Change-Id: I0f057caf473951df56a2af9633e3a5b53e0809b1
With the check added in commit 7566819139,
diskimage-builder fails to build RPM-based images if kauditd is not
running. However, this is only valid for environments where SELinux is
enabled. If SELinux is disabled (which is identified by an empty _runcon
variable), proceed with running setfiles.
Change-Id: I1b056f20a3a55f7333391207d9e1049d25ece041
Closes-Bug: #1779273
Diskimage-builder fails to build ubuntu-minimal images when run on
a Ubuntu bionic-beaver (18.04) instance.
The user gets "Couldn't create tempfiles for splitting up" when
apt-get update is run in the ubuntu-minimal element root.d.
The issue is that the /tmp inside the chroot is not getting the
proper permissions applied from the base-files package. This is likely
because the pip-cache element has already created the directory before
the base-files package is installed.
This patch changes the order of pip-cache to root.d/11-pip-cache so that
it runs after teh base OS root.d elements run.
Change-Id: I6fd1cb2a23422206884165eb502b260f0c1e52f7
The ubuntu-minimal README states that the latest Ubuntu LTS
is the default, but currently that is not true. This patch
changes the default to the current LTS.
Change-Id: I10f28314d1a5969c20094194637cfe31219d228c
The apt sources are set out in root.d/75-ubuntu-minimal-baseinstall
and the cache is updated, cleaned and a dist-upgrade is done there.
As such, this file is unnecessary.
Change-Id: Idab5ede3f235bc204c4bdebf40fbcf4a12e5bc2f
The ubuntu, and ubuntu-minimal elements both make use of a common set
of environment settings to determine the distribution name.
The ubuntu-minimal element also does a few extra things which would
appear to apply to both sets and bring in extra architecture support.
As such, these are included in the common element.
This intends to be part of a series of patches which will eventually
create a new element to build a minimal ubuntu-systemd-container
element which can be used for lxc/nspawn containers.
Change-Id: Ia4e620f7d3fa6215484a8d218cea2f28bd1ffaee
The grub.cfg has two variables [1]
GRUB_CMDLINE_LINUX : used on all boots
GRUB_CMDLINE_LINUX_DEFAULT : additionally used on all "normal" boots
The problem with I2298675dda1f699c572b3423e7274bc8bd7c1c9d is that it
appened the values in DIB_BOOTLOADER_DEFAULT_CMDLINE to both of these,
resulting in duplicated arguments. I don't think we considered that
GRUB_CMDLINE_LINUX_DEFAULT actually already appends to the
GRUB_CMDLINE_LINUX values.
Make DIB_BOOTLOADER_DEFAULT_CMDLINE only append itself to
GRUB_CMDLINE_LINUX_DEFAULT. That seems to line up sensibly with the
name of the variable.
Documentation is enhanced around this, and a releasenote added.
[1] https://help.ubuntu.com/community/Grub2/Setup
Change-Id: I76b5442a9090c19a6540ed2d4ab324546f241ebf
Closes: #1791736
Without this fix, building a CentOS image on Ubuntu where audit=0 is passed
as a kernel boot parameter will lead to the following error:
disk-image-create centos7 dhcp-all-interfaces cloud-init-nocloud \
devuser yum epel baremetal
... dib-run-parts Running tmpdir/hooks/cleanup.d/99-selinux-fixfiles-restore
... Error connecting to audit system.
Change-Id: I229d9b72f88bffddca42da57f01c27e902427071
Due to the arm naming convention, building centos images for arm64 and
aarch64 does not yield the same result. In order to locate grub2 on
aarch64 the correct mapping is added.
Change-Id: I1bb227b2523e420e394fec8c52c6c79fcdd31c53
Closes-Bug:#1789414
Signed-off-by: Charalampos Kominos <Charalampos.Kominos@enea.com>
This replaces the deprecated (in python 3.2) unittest.TestCase method
assertRaisesRegexp() with assertRaisesRegex().
Change-Id: I0ac482741ad4adc1127dd9e9f64c1c8101f370e5
Signed-off-by: Chuck Short <chucks@redhat.com>
Currently there is a bug, that tries to detach the device from a
partition at the first try, without considering that there may be
other partitions and volumes on it. Ensure that the detach is done
properly, and add a test to ensure that this happens correctly.
Change-Id: I35c5a473509f17a70270a2cbf5bf579faaeb123a
Fixes-Bug: #1777861
A recap -- we run umount phase then cleanup phase.
Currently we register a object to do the final LVM cleanup based on
the parent PV. In light of I697bfbf042816c5ddf170bde9534cc4f0c7279ff,
I believe this should just be done in the cleanup phase. Note there
was probably additional confusion because the partition removal was
done in the cleanup phase until
I7af3c5cf66afd81a481f454b5207af552ad52a32, where is was moved into the
umount phase.
Thus it is moved into the cleanup() function and this should now run,
per the comment, after everything is unmounted in umount phase.
This also exposes that we didn't have the cleanup phase in the unit
tests (because it wasn't doing anything I guess). Add it.
Change-Id: I1c5f4ffc9619c774f78d21b918a81647b3dc28f5
This ensures nouveau is not loaded at boot, which is required when installing
NVIDIA GPU drivers and to avoid issues with PCI passthrough of NVIDIA GPUs.
The option to disable kernel modesets ensures that it can be unloaded again if
it happens to be loaded after boot (e.g manually or implicitly by X).
bp tripleo-vgpu
Change-Id: I60815de86e7b22dfb39555af9d2d53564841e2ab
Related-bug: 1774674
modprobe element currently fails when DIB_MODPROBE_BLACKLIST is not set.
As there are now two methods to control blacklisting this should be optional.
Change-Id: Ibf3c31a95177ba88c1b93228490c7f36f5b70b57
In some cases cache-url can get pulled in without curl, causing it to
fail.
Co-Authored-By: Adam Harwell <flux.adam@gmail.com>
Change-Id: Ibd66c2ca4f8cc423783555d8a99b1184f43adff2
This review squashes:
Iac9afc7766d3640815dc20cfd6de1245d36a09cc
Ie894b5801bd7b3815432882cd626941e89d9f9a1
We need to do this as we can't fix pylint without networkx as that
failes requirements-chak due to us having a cap on networkx and we can't
uncap networkx as part of tripleo-buildimage installs without
constratints which gets us 2.1 and DIB desn't support 2.x
This is the commit message Iac9afc7766d3640815dc20cfd6de1245d36a09cc
---
One of the pylint dependencies has updated to be python3 only; this
version of pylint correctly caps things so it still works with
python2.
This also exposes that we need to uncap networkx due to
I34045f87ca19c2f184b040f4d89347374cce518b. We should remain on
version 1 for now thanks to upper-constraints, but we need to maintain
the lower-constraint.
---
This is the commit message Ie894b5801bd7b3815432882cd626941e89d9f9a1
---
Support different versions of networkx
Since the entry of networkx 2.0 nodes has a different
behaviour. Checking if dg.nodes is iterable is enough to add
compatibility for new/older versions.
---
Change-Id: I82dc61fac6c156a4f0d574290c7632077aa53195
Without this fix, a LVM based ubuntu-minimal image will fail
booting due to the fact that the boot process will not be able
to retrieve the root filesystem using LABEL=(cloud)img-rootfs
Change-Id: If4ecf65868563f7b799160a58af6312bedf956bf
This patch adds an expected semicolon to an end of statement in
dhclient.conf for dhcp-all-interfaces element. Without this fix, an
error occurs when an image is booted with a message,
'semicolon expected.'.
Change-Id: I8311dbc67cc2815223111da01e7a7517c7d6f059
When building with debootstrap, debootstrap will use the key to check
that everything is properly signed. It will not `apt-key add` the key
into the final environment, however.
Early adding the key after debootstrap before we need to read from the
private repo again prevents unsigned issues. This also maintains the
integrity of the packages in the environment throughout the build.
Change-Id: I5ca75ae4620c9fb26b512cb30f8cd79fa7a0373a
Similar to I697bfbf042816c5ddf170bde9534cc4f0c7279ff, the order of
things called is "dib-block-device umount" *then* "dib-block-device
cleanup".
Because we're doing the "kpartx -d" here in cleanup, it means that the
loop-device is removed in umount phase from level0/localloop.py, then
afterwards we try and remove the partitions.
Change-Id: I7af3c5cf66afd81a481f454b5207af552ad52a32
TODO: a test case to ensure the ordering
One call in localloop requires the output of the command, so modify
exec_sudo to buffer up output and return it. This is modelled on the
same thing in package-installs-v2 which seems to work. Rather than
return a subprocess exception, return a dib exception which everything
should have imported anyway.
The overall reason for this is to make our external calls more
consistent for mocking in unit testing.
Change-Id: I10d23b873dee9f775daef2a4c8be5671d02c386e
This element will replace modprobe-blacklist element. It wil
still have the blacklist functionality, but it also adds
the feature of passing a complete file with settings to the
modprobe.d directory. Adding this functionality, that will
allow elements that depends on this module, to just copy the
specified files to the final directory.
Change-Id: I9a44f7d11520b8b1e604956d3c1db2fc7e2bf457
As described in blockdevice.py detachment and (most) resources
release must be done in the umount phase of a block device module.
Until now these jobs were done in the lvm cleanup() phase - which
is too late - especially when using nested LVMs.
This patch moves the functionality of the cleanup() phase to the
umount() phase for the lvm module.
It includes a test case that fails without applying the provided
source code changes.
Change-Id: I697bfbf042816c5ddf170bde9534cc4f0c7279ff
Signed-off-by: Andreas Florath <andreas@florath.net>
Our sgdisk calls are putting extra double-quotes around the names of
partitions. This confuses sfdisk, which confuses growpart, which
confuses growroot ... and you don't get your partition grown for EFI
boot.
Ensure we just bunch arguments into the list directly (for Popen)
rather than string split and have to worry about quoting. Add a check
for this to our GPT unit test, extending it to include a space in the
name of the root partition.
Change-Id: I0a8cb69bb4c9c0865fbaa63ba0d7210028da552e
The existing directories are needed for stage building (a part of the
Gentoo build process). Normally these directories are empty, but there
are times where overrides need to be defined. This commit handles
existing overrides for keywords. For historical reasons the overrides
were able to be put in different files and directories, this
centralizes them.
This also updates the version of openssl/cryptography that works with
or without bindist.
Change-Id: I62c934ed305a711a4a9a3ef01fa55ad142aebb78
This patch adds an element that handles the configuration for
creating a disk capable of being a remote root filesystem through
iSCSI on CentOS images.
Tested on Fujitsu Server and boot with BIOS and UEFI mode successfully.
- Tested Boot-From-Volume + EFI for centos7 with following elements:
"centos7 vm devuser cloud-init-datasources dhcp-all-interfaces
iscsi-boot dracut-regenerate block-device-efi"
Co-authored-By: Nguyen Van Trung <trungnv@vn.fujitsu.com>
Change-Id: Ia1f23d722dced6f254fd7aee86abe8066a72fa42
According to http://bit.ly/2HA4oDO and
the official Ubuntu manual
http://manpages.ubuntu.com/manpages/xenial/man5/interfaces.5.html
source-dir support has been removed from Ubuntu >= 16.04/Xenial
Once an image is generated and booted, moving the dhcp interface(s)
declaration(s) from /etc/network/interfaces into specific subentries
of /etc/network/interfaces.d and calling 'service networking restart'
just make your instance unreachable and all interfaces are left
unconfigured.
This patchset fixes this issue
Change-Id: I6b6b99c81490c874c5db5405c2fbf3c180c87464
When booting on UEFI, there was an issue mounting the vfat
filesystem. It was caused because the mount was defined in
/etc/fstab in lowercase, but the disk had it labeled in upper
case, and system could not find it. Conver the label to upper
case in case of fat/vfat.
Change-Id: Id3dee735e6f8fb221d199c4aba648f3e9a6e4206
When building the image on a non-efi environment, it generates
linux16/initrd16 entries. But to boot from UEFI they need to have
linuxefi/initrdefi entries.
Use sed to replace those entries, in case we have an EFI image.
Change-Id: I47c96450e10f34b91bcc32888532bd7ab87cf316
setfiles isn't supported on the vfat /boot/efi partition. Add it to
the skip list.
Tested on Fujitsu Server successfully.
Change-Id: Iab262c4bdb0ecc25ca6b77ee4aff1ce442c0c578
This patch adds an element that handles the configuration for
creating a disk capable of being a remote root filesystem through
iSCSI on Ubuntu and Debian images.
Change-Id: Ibf9e39d2bdab530106015f156d23d28029d12b0d
Closes-bug: #1716794
When using uefi in rhel, the package mapping is incorrect.
We need to add specific grub-efi* mappings to use grub2-efi
Change-Id: I2db96ae85fd5e4638c794015b2f8164c018420e3
