This patch update the find_interface to lookup
for InfiniBand interface according to it's BOOTIF
Closes-Bug: #1532534
Change-Id: I21b91cfd10888ac036f6347a0a44cdca422830a6
In certain cases, with packages cached that need an upgrade,
when performing that action the system hangs waiting for
a prompt.
Add force-confdef option, that will let dpkg overwrite
configuration packages that were not modified. In combination
with already existing force-confold flag, it will allow
to avoid any conffile prompt.
Change-Id: Ifb177f9ac2c9ad29f8b92309c5b8cfe8e60a4e14
In order to avoid conflict with installing dependencies for IPA from
pypi and distribution packages this patch propose installing IPA in a
virtual environment.
Closes-Bug: #1506792
Change-Id: I6a4c6403813d86f4110e98449ddd874109101b9e
By default we create a tarball of any debootstrap rootfs we create. For
the majority of use cases this is a large performance hit for no
benefit. Lets make this an opt-in feature.
Change-Id: I58fc485aacacaa17243bf9ce760ed91256d1f182
python3 is a hard requirement of dnf so can't be removed [1]
grubby is also required for kernel installs on Fedora. For too much
detail see I1a6e45d04755515286b3d49f8280c16b527e2f48; but the kernel,
via dracut, now has this as a "recommends" due to people removing it
and making unbootable systems.
[1] http://logs.openstack.org/76/248976/2/check/gate-dib-dsvm-functests-devstack-f21/734c8bd/console.html
Change-Id: I5867ecd57834eece9477aa9ea4b8bdd70e238084
The debian-minimal element creates /etc/apt/sources.list solely with
the 'main' component. I need to add 'non-free' and 'contribs'. I tried
to pass them via DIB_DEBIAN_COMPONENTS but it is not recognized.
Make debian-minimal to honor DIB_DEBIAN_COMPONENTS. Note that it is
comma separated for 'debootstrap', so replace commas with spaces to fit
the needs of sources.list.
Example usage:
DIB_DEBIAN_COMPONENTS='main,non-free,contrib'
Will debootstrap with the three components then when debian-minimal is
realized pre install a sources.list that has:
deb http://example.org/debian jessie main contrib non-free
Change-Id: I1dca2e8ffd31044a6b441ccb277298601e62f67c
Gentoo provides eclean-dist via the gentoolkit package
eclean-dist isn't needed anyway was /usr/portage is removed anyway
Removed redundant package update in cleanup.
Change-Id: Icf4f9ed549b9a6d923448d927d7c42bcf8d6091b
This action has been reordered so cleanup can occur before copy to blockdev
occurs. Documentation has been added about the ordering of this element in
relation to cleanup actions as well.
Change-Id: I3f9334a3669ee588d7fa7129202c97fa22fdb050
While it does save 1MiB of space, it might also pull python packages
depending on it. E.g. it makes impossible to install python-hardware
on the IPA image for advanced introspection.
Change-Id: Iab80dde63e6de62a5e45dcf404b4f9f633e50ac3
We were getting some subtle issues in fedora-minimal builds that
turned out to be because /var/run was not a symlink to /run.
Upon further investigation, it turns out that yum is creating a
/var/run directory for it's pid file when it starts working in the
empty chroot (which I verified by stracing it)
---
5905 stat("/home/ubuntu/tmp/dib-tmp/image.Ac4VZZsl/mnt/var/run", 0x7ffddffa0330) = -1 ENOENT (No such file or directory)
5905 mkdir("/home/ubuntu/tmp/dib-tmp/image.Ac4VZZsl/mnt/var/run", 0755) = 0
5905 open("/home/ubuntu/tmp/dib-tmp/image.Ac4VZZsl/mnt/var/run/yum.pid", O_WRONLY|O_CREAT|O_EXCL, 0644) = 6
---
Because this happens *before* we install "filesystem" (the package),
we mess up it's symlinking.
To work-around this, pre-install the trio of base packages (setup,
basesystem, filesystem) with rpm from outside the chroot.
Change-Id: I411b6ec9d91d95d3a0f98e76853086af3b70abe8
The Ubuntu Xenial cloud server images set the mode of
/var/lib/apt/lists/partial to 700, so when mounted it's inaccessible to
an unprivileged user, resulting in an error:
find: `/tmp/image.aDQKdkRi/mnt/var/lib/apt/lists/partial': Permission denied
There's no reason an image should come with anything already in
/var/lib/apt/lists/partial, so just avoid trying to descend into that
directory when fixing the apt translations packages.
Change-Id: Id27f0166bfb09d67200f337a5ffff2f2037b7c1c
This is a slight refactor I found useful when debugging. The
udevadmin info query will be visbile in the output of "set -x" which
helps, and is the logs/journal.
We can also reduce some calls by keeping the value and just grepping
with a herefile.
This also does some error checking and bails out if it does not see
what it needs to continue.
Change-Id: I39c4d262f9c5ce53f6b83d95b1363a74834cf2c8
Tucked away in systemd-udev-settle.service is the following comment
# This service can dynamically be pulled-in by legacy services which
# cannot reliably cope with dynamic device configurations, and
# wrongfully expect a populated /dev during bootup.
The info that the growroot script is querying is populated via udev,
particularly the blkid bits of [1]. This creates a race-condition
where sometimes udev has been triggered and the rules have applied and
sometimes not. Obviously in the first case, the root disk is not
grown correctly.
systemd-udev-settle is mostly disabled on distros because it can cause
an increase in boot-time for systems with lots of disks; this is not
our situation so it makes basically no difference.
That said, I will investigate if some systemd people know even better
ways to do this (possibly the service should depend on block .device
targets in systemd, and then filter out and only apply to the root
disk?)
[1] https://github.com/systemd/systemd/blob/master/rules/60-persistent-storage.rules#L66
Change-Id: I453e3afcd953dfc29ab6c42ddc81e940cfa70ee0
A TODO was placed on the partitioning section of the vm element to
replace sfdisk with a saner (and less arcane) way of partitioning. It
suggested parted for replacement. This changeset should reproduce the
same disk label and partition layout as sfdisk, but with less ioctl
errors and version dependency. It will also ensure partition alignment.
Change-Id: I5d8d75131458b73bfb05f80f1bfa7e2970e004b3
We currently install pip from package in the simple-init element.
We should really allow users to select whether to install pip from
git or package.
Change-Id: Ia5e62b9635af90d81227274a1dd8f20474cdbf73
As described in the comment, there is a dnf equivalent of this command
that doesn't require us installing yum-utils (which drags in yum on
dnf-only systems such as f23)
This is a small consequence to this -- due to us not installing
yum-utils some installs will now be completely yum free. This causes
a breakage in ironic-agent 99-remove-extra-packages where we remove
the yum package. There is a long-standing bug/feature where missing
packages in a group of packages do not cause yum/dnf to exit with
failure, but uninstalling a single package will. Because we have made
the systems yum-free, the uninstall of yum can fail in this corner
case.
It has always been like this, so I'm in favour of the "ain't broke"
approach. To work-around this, I have just put yum into the existing
list of packages to be cleaned up. I have added a note to the yum
installer taking note of this behaviour for future reference.
Change-Id: I8bbdc07ccdb89a105b4fc70d5a215077c42fcd03
InfiniBand interface takes more time to bring up then
Ethernet interface. This patch just increase the retries
to 20 times, to make it work for InfiniBand as well.
Change-Id: I5c4842696207885552413ea2d053f2e90bd6803c
I noticed when running functional tests via a interactive shell they
would end up hanging; I tracked it down to waiting for input on this
tar command. We need to specify "-f" so it opens the file ...
---
| + tar -t /tmp/tmp.qid2Ygfu7v/image.tar
| + grep -q /tmp/dib-test-should-fail
| tar: This does not look like a tar archive
| tar: /tmp/tmp.qid2Ygfu7v/image.tar: Not found in archive
| tar: Exiting with failure status due to previous errors
---
I guess we never noticed because it's always running in CI where stdin
is closed and it just get that nothing read above. This probably was
reversing the logic of the "should have failed" tests ... but I don't
think we take that path currently for any tests.
Change-Id: Idad2c172797395d45c0d750ec687011cc1fbf52a
Adds a post-install function that enables installed initscripts,
as that is not done by default in gentoo.
Change-Id: I04e8d506ddcbefa8a983dd31ad16df5e13cb26e7
Closes-Bug: 1539276
This checks the profile, if it has hardened in it's name it needs xattr support
unfortunately xattr support cannot yet be relied on everywhere, so it needs to
be disabled for hardened profile builds to correctly pax-mark.
Change-Id: I7fb855249a9e6c9b6497ab5061b4ea3c014f5081
Closes-Bug: 1537177
Due to upstream bug [1] there are uninstallable packages which mean
our functional tests don't work. We will revert this when things are
working upstream.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1303660
Change-Id: I93c2990472e88ab3e5ff14db56b4ff1b4dd965ef
subprocess.check_call() returns a byte-string which needs to be turned
into a unicode string for python3 compatability.
Also some minor refactoring while we're here.
Closes-Bug: 1536462
Change-Id: Icd957bc4d93ccad94b1246ad62e6e02ee14d9ca5
