This element takes up a *huge* part of the logs of openstack-infra
builds as we go and cache every git tree.
This silences most of the noise which will reduce the mess
in the logs considerably.
Note that we've had logging on this turned down since
I91c5e55814ba9840769357261d203f4850e2eba6 but it has been
ineffective in stopping the log-spew output, see the
dependency change.
Change-Id: I60f06f84d57087c82b3907575bff125015d35171
Depends-On: I1e39822f218dc0322e2490a770f3dc867a55802c
It turns out our manual locale cleanup is causing issues (see
I54490b17a7f8b2f977369044fcc6bb49cc13768e). Upon further
investigation, I think this is a better approach than manually
deleting repos.
glibc on Fedora obeys the %_install_langs macro for reducing the
installed locales (as mentioned in the comments, F24 has moved to
having different packages, but worry about that later).
So our existing clear-out is really only required for CentOS, whose
glibc does not have any way to indicate to build less locales.
However, %_install_langs is still correct there, as it restricts some
of the translation files and other things installed with the %lang
macro in spec files.
This is complicated by us having to set this at glibc-common install
time, which happens with the "yum" from outside the chroot (i.e. on
trusty). Since this is too old to have flags to pass this, we need to
fiddle with rpmmacros.
I've tested this with fedora-minimal builds and the locales file is
about 2MiB, which is what it was after the cleanups, and the listed
locales are only those we expect (i.e. it appears to be working).
Change-Id: I528a68beeb7b2ceec25ccbec1900670501608158
Because Fedora 21 is EOL, the appropriate cloud images were
removed from the mirrors during the last days.
Because of the removal, currently all CI tests are failing.
This patch removes the Fedora 21 CI tests.
(Adding and supporting Fedora 23 is done with another patch -
because some additional changes are needed here.)
Change-Id: Ib85bb6fafd4f56ecc55dd420048f4d9e6e6969f3
Signed-off-by: Andreas Florath <andreas@florath.net>
I realised I'd been using die() in a few places assuming it was
available, but it wasn't exported. I guess it didn't matter because
whatever was wrong, we were failing anyway :)
This exports the function to make it available to sub-processes, which
should remove the need to source it as done in several places.
Change-Id: I7b9a5a6db406e160099b6ed9fde80455ae227327
If REPOREF="*", HAS_REF will be used without initialization. As -u is set
the script will terminate with error.
Change-Id: Ic1d88415adfef66dfc6c1d92610a45a9eb6359f3
Signed-off-by: Liu Qing <liuqing@chinac.com>
The "set to localhost by default" behavior for manage_etc_hosts has been
deprecated for more than a year now by change
Ia8582883f737548e2911d3f36a1943e5b236281b.
Setting that value to "localhost" is still possible, but it won't be the
default anymore. If the previous behavior of assigning the hostname and
FQDN to 127.0.0.1 is still desired in some environments, it can be
achieved by setting the DIB_CLOUD_INIT_ETC_HOSTS environment variable,
as the deprecation warning message suggested.
Change-Id: I5a19d46e2f305769a0c89c9d25d2e6be02910221
Add a pkg-map to install cloud-initramfs-growroot on Precise, as it is
required there because the kernel is too old to use growroot on a live
file-system. This was generically removed in
e23b087505.
Change-Id: I5e6cbc4b74dc72a6f23f73a018c028f3ff7c0157
Add ability to filter in pkg-map on release, which defaults to
DIB_RELEASE. As per the examples, release is a more specific target
than distro, but distro still has to match.
Added a debug flag and ability to use a pkg-map directly for
debugging/development.
Change-Id: Ie282f96966e46236b06bc276de0168fc7a66c5da
Export FS_TYPE from img-defaults and use it to remove hard-coded
defaults in the debootstrap mounting. Also, cleanup the suse element
as it should have access to the exported variable.
Change-Id: Ie9b671ca9336060a5ad294be48aa7eff442bf066
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
Currently there is no way for a service to become aware that
dhcp-all-interfaces is finished configuring all the interfaces at
boot time. This causes problems for applications like the
ironic-python-agent which scans the interfaces when it first starts as
part of the inspection stage and can race against dhcp-all-interfaces
bringing up the interfaces, leading to inconsistent results.
This patch ensures that the dhcp-all-interfaces script runs before any
network interface is configured and brought up by the rest of the
system, and also ensures that the ironic-agent element also waits for
the network to be online before starting. This is done by using the
network targets provided by systemd.
Change-Id: Id9583b7f54361aa603a6229da598ad6a0f0f7938
I'm not sure why this comment is here. base works with centos-minimal
(we changed it in I2956aaa49ba3137a799f97e0983ab4b7c93a0a0c) and we've
got images deployed with such a configuration.
Update the comment
Change-Id: I3207f87dc29280183c0960ea863533a4d441081c
"ironic-agent" element is currently removing sudo, which breaks other
elements such as devuser. There appears to be no security or other
reason to do this, it's just the way it has always been. Leave sudo
in as it is considered part of the base cloud images.
Change-Id: Ida9b1885f745146071e4b2d85ae59341ac85d5c8
Closes-Bug: #1572486
The apt-sources element did not work with debian-minimal, because
the later one overwrote the /etc/apt/sources.list file created by
the apt-sources element.
Two changes were made:
o the debian-minimal uses now files inside the /etc/apt/sources.list.d
directory. Therefore there is no possibilty for clashes between those
two elements any more.
o instead of only adding backports, also the updates and the security
repository is added by default which gives perfect initial
configuration for a stable system.
If you want to use local mirrors with other naming schemas or an
unstable tree, there is the possibility to fully specify the
repositories.
Change-Id: I69dbaa34be3db3d667e6bd8450ef4ce04a751c70
Signed-off-by: Andreas Florath <andreas@florath.net>
The various distro elements include a copy of this script which installs
all files in the bin/ dir of the copied element hooks in to
/usr/local/bin. Lets share code rather than repeating ourselves.
Change-Id: I354382f8c42ede2e9b8c548b7df8367c03e6836e
As motivation for this; we have had two breakouts of dib in recent
memory. One was a failure to unmount through symlinks in the core
code (I335316019ef948758392b03e91f9869102a472b9) and the other was
removing host keys on the build-system
(Ib01d71ff9415a0ae04d963f6e380aab9ac2260ce).
For the most part, dib runs unprivileged. Bits of the core code are
hopefully well tested (modulo bugs like the first one!). We give free
reign inside the chroot (although there is still some potential there
for adverse external affects via bind mounts). Where we could be a
bit safer (and could have prevented at least the second of these
breakouts) is with some better checking that the "sudo" calls
*outside* the chroot at least looked sane.
This adds a basic check that we're using chroot or image paths when
calling sudo in those parts of elements that run *outside* the chroot.
Various files are updated to accomodate this check; mostly by just
ignoring it for existing code (I have not audited these calls).
Nobody is pretending this type of checking makes dib magically safe,
or removes the issues with it needing to do things as root during the
build. But this can help find egregious errors like the key removal.
Change-Id: I161a5aea1d29dcdc7236f70d372c53246ec73749
The dhcp-all-interfaces and simple-init elements did not have the ISC
DHCP Client package mapped for OpenSUSE, which caused DIB to fail with
"'isc-dhcp-client' not found in package names. Trying capabilities."
Similarly, the bootloader element did not have the grub-pc package
properly mapped for OpenSuse, which caused DIB to fail with "Package
'grub-pc' not found.".
This patch adds the package mappings for these elements so that the
opensuse element can be created and booted successfully.
Change-Id: Ife478158fec3a95de73a9206b38dcc6511d56cc8
The proliant-tools element helps to do RAID
configuration in ironic for HPE servers.
This fix proposes to install the proliantutils
in ironic-python-agent's virtualenv created
using ironic-agent element.
Closes-Bug: 1563648
Change-Id: If63c725a42740ab244a2b4004797cba09d0f154e
Every platform has a different name for their DHCP client, so use a
generic name "dhcp-client" in the package name and let everyone choose
their sub-name. This also brings some consistency across simple-init
& dhcp-all-interfaces
Change-Id: I797aa7aacb13dfb7f35700463dc11d55552eb108
This makes use of the dhcpcd package and it's ability to run on all
interfaces by default. We disable the privacy extensions and dhcp
overriding the hostname (both are enabled by default). Other than
that it 'just works' and was the method used to bring up interfaces
on Gentoo Openstack images before we switched to building with DIB.
Change-Id: I02c14927d70b22f560c6fc149fefca0f93933f56
Rather than removing all locale related stuff in cleanup, strip the
locale archive and rebuild it.
Building just en_US (along with POSIX/C) brings things inline with
debootstrap. As discussed in the bug referenced, this is about the
best we can do for Centos7.
Fedora 24 has split languages out into packages so we don't have to do
this, but I have not dealt with that yet. A guard is put in place so
we make sure we revisit this when we try to build F24.
Change-Id: I3f384d23e52effd6a09f47134746caa4a5c586be
cloud.centos.org appears to have changed their naming for images.
This latest iteration drops the YYYYMMDD in favor for YYMM, but
also has a 'latest' available without the date stamp.
This change will mean we no longer have to submit new code reviews
whenever centos changes.
Change-Id: I5a6a0de822561c1d0681abb9487993acf55918f1
After a bit of spelunking, I90d0c96d5659326ba67d6119b96d9a4113adf7fe
was the original change that introduced the setfiles here rather than
autorelabel at boot time.
Touching the autorelabel file probably makes sense somewhere low, but
when we start relabling the file system we really should be doing that
as late as possible so we fix up everything that has come before.
Move this to 90 to capture this.
Change-Id: Iae0afe850f52ec3b59c49507fa9bbcc1c8f8cfa1
If the initial yum install into the chroot fails, we can leave behind
a lockfile and an incorrectly modified rpmmacros.
Change this so we run the cleanup unconditionally.
Change-Id: Ia9f9c4c845e5f34d33ff9a4ab7226c9175283757
I guess I hadn't tried centos-minimal without the puppet elements that
install this for us. But the "base" element wants dkms, which is only
in EPEL for centos. But it's a helpful convenience so is globally
useful.
Change-Id: Ia9af97efdbd855fb8202353196ad649093788cb8
For whatever reason, RHEL identifies itself with DISTRO "rhel" for 6
and "rhel7" for 7, but centos just uses "centos" and DIB_RELEASE. So
this was wrong and installing EPEL6 on centos7.
But we can simplify it completely for centos because that comes with
the epel-release package already included.
Change-Id: I2b8f5d30b850fef46b4a5ba32a917abcbf25932c
This commits provides support to add certificate while
building the image using ironic-agent element. The
certificate can be CA certificate or self-signed certificate.
The certificate is set to the environment variable
'DIB_IPA_CERT' which in turn is used by the ironic-agent
element while building the image.
Change-Id: I648f7934d4787dcc3030885cfca771b642a9595e
Running 'disk-image-create -a amd64 -o precise vm precise' will fail to
build with the following error [1]. To fix this, we should split out the
switch-case to allow base to install the 'software-properties-common'
package.
[1]
dib-run-parts Fri Mar 18 18:43:16 UTC 2016 Running /tmp/in_target.d/pre-install.d/03-baseline-tools
Hit:1 http://mirrors.cat.pdx.edu/ubuntu precise InRelease
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
Package python-software-properties is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
However the following packages replace it:
software-properties-common
E: Package 'python-software-properties' has no installation candidate
Change-Id: I011f02fcf70df9d1d6fa30ed89907fbc2588937e
If we dont force the hostname to be debian, the hostname will
be the one choosen when creating the instance with horizon
This bug was introduced when the debian element was split
into debian and debian-minimal and debootstrap in commit 23aa76df
Change-Id: I007a3531f6876890a2e113082211889ec5ead1a1
In order for glean to operate properly and regenerate ssh host keys it
needs to start on a host without any ssh host keys. We hadn't been doing
this meaning that new host keys were not generated on images using
simple-init. Fix this by having simple-init delete any host keys found
in /etc/ssh late in the build process.
This should force glean/sshd to generate new host keys on first boot
depending on the distro.
Change-Id: Ic917387d92febf21c2cc37dfc1fa83fcf0c8e469
The dib-run-parts/root.d/90-base-dib-run-parts script would mysteriously
fail whenever the dib-run-parts is not in the path. The install
commands complaining with:
install: missing destination file operand after
'/tmp/image.ILFTBYVy/mnt/usr/local/bin/dib-run-parts'
The reason is chaining a command in exec bypasses set -e. For example:
exec /bin/ls $(which doesnotexist)
Will works and continue.
Handle the which lookup in a variable to have the script abort
immediately whenever dib-run-parts is not found.
Left an inline comment to make sure the fix is kept around in the
future.
Signed-off-by: Dan Duvall <dduvall@wikimedia.org>
Change-Id: Ibb5d7342b0d06483b84f9dd567e1cc0bf90f194e
Tgtd starts after OS boots up automatically, listens on the port 3260,
which cause lio fails to bind the same port later.
This patch removes the auto-start script of tgtd.
In IPA service, lio or tgtd would be used to create iscsi target.
If tgtd be chosen, IPA will start tgtd before iscsi setting.
IF lio be chosen, tgtd would keep not running.
Change-Id: Ic62055ac2f9252df832739631bfcbabfac0f9c4e
Closes-Bug: #1554987
On ubuntu, if an interface exists but is unconfigured then ifquery
$iface will return 0 but no output. This will cause dhcp-all-interfaces
to not attempt to dhcp on that interface.
Change-Id: Ic1532728ae9ca6d759714392f727d25b814ef336
As the doc says, we want to remove all interfaces that come by default
in cloud images. Cloud images also come with an eth1 though, so lets
just remove all interfaces.
Change-Id: I49c74a3285e6a610ac723bdf976f3727d2736749
Where the base install for the image uses systemd but
the iptables service is not present, the postinstall
script for the ironic-agent element can fail. This is
due to 'systemctl disable iptables.service' returning
an error status when the service isn't present. Check
whether the service is enabled using 'systemctl
list-unit-files'.
Change-Id: I8069b062a27caead4097747d7aeae24a5262e117
Add a pkg-map file so that Gentoo can avoid polluting the FS with
files not tracked in the package manager.
Changed the directory name so that the source-install method would
actually be disabled when DIB_INSTALLTYPE_pip_and_virtualenv=package
is set. Also changed source-repository line to be consistent with
the element name.
Change-Id: I5225bd7113ff2588c755ad4cd4ae9a2d78fff196
If you check logs like [1] it's literally thousands of lines of the
same thing over-and-over as the git caching happens. It is basically
all just noise unless you're debugging it specifically. Up this to
tracing level 2 ("-x -x") to see it. Add a note in the help about
multiple flags, which has always been intended but not documented.
Image builds should continue to run with single "-x", but we could
probably greatly increase signal:noise ratio in the logs with a little
more judicial use of this to turn down some of the very noisy &
repetitive parts.
[1] anything in http://nodepool.openstack.org/
Change-Id: I91c5e55814ba9840769357261d203f4850e2eba6
This commit adds 'psmisc' and 'dosfstools' to the required
packages for ironic-agent element which in turn
installs ironic-python-agent and ironic-lib.
The ironic-lib requires the fuser command to be executed,
which needs the package 'psmisc'. Similarly mkfs with
'vfat' requires 'dosfstools' package.
Closes-Bug: 1554075
Change-Id: If421f2394c34bb938813d0e15e5085d093215921
This element installs package to ensure that the resulting image
provides the binaries outlined in posix specification [1]. This solves
some problems such as cron missing from the ubuntu-minimal images, and
hopefully minimizing the problems from similar problems in the future.
This is the image size difference:
Resulting qcow image sizes:
Ubuntu Ubuntu-Minimal Debian Centos7
None 334MB 330MB 352MB 470MB
Posix 353MB 375MB
Posix+ 354MB 374MB 406MB 471MB
Posix+ = Posix + gcc + cssc
[1] http://pubs.opengroup.org/onlinepubs/9699919799/idx/utilities.html
Change-Id: I2a8f77bf8a0fdb04b328e56425d43a60eb3f7eed
The vm element makes use of parted. In order to create partitions
parted needs to be installed, growroot does not work without partitions.
Change-Id: Ib46cb818e0116f050de01f9a19e6041328d6d478
We are currently removing only eth0 network config in the simple-init
element (since simple-init is responsible for networking if you are
using it). We install an eth1 as well in elements such as debootstrap.
Lets just rm eth*.
Change-Id: Id9ea8c5e402f3a06b9064a939ad4b2e168cd6223
Right now we hard code in a path for an alpha release image. There are
release of ubuntu-core now so lets support them.
Change-Id: Ice989d32e0910cbbfb711e06adb33b07682856c9
This commit adds testing for the gentoo element based off of the debian
element. In adding testing support a couple of additional errors were
found and corrected, namely the following.
* shm is not in /proc/mounts though it is valid for use based off of
the sticky flag.
* The path in ELEMENTS_PATH needs to be pruned to be usable.
* Added uuidgen-runtime to the list of packages installed for Ubuntu
as the new ubuntu-trusty image does not ship with it.
Change-Id: I0d2768a912b350e1b2cf40d2fd227fdc767b1bcb
The "base" element is included by default, and if centos-minimal tries
to provide it then we die because two elements are providing the same
thing.
Change-Id: I2956aaa49ba3137a799f97e0983ab4b7c93a0a0c
This patch add the lshw utils to allow the agent
to retrive the vendor name. It also keeps the
/usr/share/misc/pci.ids file for Ubuntu distro.
Change-Id: I2828a7e585449f63887ad5a2e338b4e043d68e63
I have seem some occasional odd failures coming from the "dnf -y
update" done by elements/base/install.d/00-up-to-date.
dnf seems to sometimes think a package is not installed when it really
is. It then seems to try and re-install them, but notices they are
installed, and then bails with a failure exit [1]. The packages that
seem to cause this vary, but the common thread is that they seem to
have all been installed during the initial phase of installing the
package manager in the chroot.
I suspect that when we are building the chroot, we do our initial
install with the "external" yum & rpm. Then we start using the
dnf/yum in the chroot, but we're actually using meta-data created by
the *external* tools -- which could be vastly different versions or
who-knows-what. While I honestly I don't have an exact root cause,
empirically I've found rebuilding the rpm db always seems to fix
things up.
So this change takes care to rebuild the rpm db with the chroot
version of rpm, and clear out the package metadata for a refresh with
"update". This should hopefully put us in a consistent state.
[1] http://paste.openstack.org/show/487356/
Change-Id: I565df23897ae511356c4861fdbe63823fa6b6ff9
This element is similar to vm, but allows more flexibility
on disk partitioning. It receives a DIB_PARTITIONING_SFDISK_SCHEMA
setting, allowing to partition the disk according to project needs.
Change-Id: I01dca5d5fd670d317f7761911a1549507de6e97d
If we are being run from a python 3 virtualenv where python2 is also
available on the host we will use the hosts' python2 over the virtualenv
python3 (even if the virtualenv is higher precedence in PATH).
Change-Id: I9a25b9e45845a4121aab8250fd53c6f006825742
This patch fixes the profile autodetect. If the profile was passed at install
time, it would overridden by the environment.d script. This was fixed by
accepting the value passed by the user, if one was passed.
The enviroment.d file is run outside of chroot, because of this eselect will
not be available on non-gentoo systems. We change the behavior to work
elsewhere, it was not working on non-gentoo systems and giving bad results on
gentoo systems (returing values from the host, not the guest being built).
This patch also fixes shm detection by checking if it is mounted already.
Change-Id: Ie58d8e19529a731bfbc9eeb4bb246988d1aaa772
Newer distros, such as debian jessie and ubuntu xenial, do not provide
ifupdown by default, but simple-init depends on it. Add it to the pile.
Change-Id: I6f4876863c67c65a82464d4e0593015cdc839c5c
This is breaking deployments that use registration. I
believe os-refresh-config scripts don't source environment.d
files, so the variable is unset there.
Given that this a blocking issue for RHEL deployments, I'm
pushing a quick revert and we can come up with a proper fix
when this isn't stopping other work.
This reverts commit 71bd8b3a33.
Change-Id: I87504660352220d45f5445bb933edc1c28885fcb
This patch update the find_interface to lookup
for InfiniBand interface according to it's BOOTIF
Closes-Bug: #1532534
Change-Id: I21b91cfd10888ac036f6347a0a44cdca422830a6
In certain cases, with packages cached that need an upgrade,
when performing that action the system hangs waiting for
a prompt.
Add force-confdef option, that will let dpkg overwrite
configuration packages that were not modified. In combination
with already existing force-confold flag, it will allow
to avoid any conffile prompt.
Change-Id: Ifb177f9ac2c9ad29f8b92309c5b8cfe8e60a4e14
In order to avoid conflict with installing dependencies for IPA from
pypi and distribution packages this patch propose installing IPA in a
virtual environment.
Closes-Bug: #1506792
Change-Id: I6a4c6403813d86f4110e98449ddd874109101b9e
By default we create a tarball of any debootstrap rootfs we create. For
the majority of use cases this is a large performance hit for no
benefit. Lets make this an opt-in feature.
Change-Id: I58fc485aacacaa17243bf9ce760ed91256d1f182
python3 is a hard requirement of dnf so can't be removed [1]
grubby is also required for kernel installs on Fedora. For too much
detail see I1a6e45d04755515286b3d49f8280c16b527e2f48; but the kernel,
via dracut, now has this as a "recommends" due to people removing it
and making unbootable systems.
[1] http://logs.openstack.org/76/248976/2/check/gate-dib-dsvm-functests-devstack-f21/734c8bd/console.html
Change-Id: I5867ecd57834eece9477aa9ea4b8bdd70e238084
The debian-minimal element creates /etc/apt/sources.list solely with
the 'main' component. I need to add 'non-free' and 'contribs'. I tried
to pass them via DIB_DEBIAN_COMPONENTS but it is not recognized.
Make debian-minimal to honor DIB_DEBIAN_COMPONENTS. Note that it is
comma separated for 'debootstrap', so replace commas with spaces to fit
the needs of sources.list.
Example usage:
DIB_DEBIAN_COMPONENTS='main,non-free,contrib'
Will debootstrap with the three components then when debian-minimal is
realized pre install a sources.list that has:
deb http://example.org/debian jessie main contrib non-free
Change-Id: I1dca2e8ffd31044a6b441ccb277298601e62f67c
Gentoo provides eclean-dist via the gentoolkit package
eclean-dist isn't needed anyway was /usr/portage is removed anyway
Removed redundant package update in cleanup.
Change-Id: Icf4f9ed549b9a6d923448d927d7c42bcf8d6091b
This action has been reordered so cleanup can occur before copy to blockdev
occurs. Documentation has been added about the ordering of this element in
relation to cleanup actions as well.
Change-Id: I3f9334a3669ee588d7fa7129202c97fa22fdb050
While it does save 1MiB of space, it might also pull python packages
depending on it. E.g. it makes impossible to install python-hardware
on the IPA image for advanced introspection.
Change-Id: Iab80dde63e6de62a5e45dcf404b4f9f633e50ac3
We were getting some subtle issues in fedora-minimal builds that
turned out to be because /var/run was not a symlink to /run.
Upon further investigation, it turns out that yum is creating a
/var/run directory for it's pid file when it starts working in the
empty chroot (which I verified by stracing it)
---
5905 stat("/home/ubuntu/tmp/dib-tmp/image.Ac4VZZsl/mnt/var/run", 0x7ffddffa0330) = -1 ENOENT (No such file or directory)
5905 mkdir("/home/ubuntu/tmp/dib-tmp/image.Ac4VZZsl/mnt/var/run", 0755) = 0
5905 open("/home/ubuntu/tmp/dib-tmp/image.Ac4VZZsl/mnt/var/run/yum.pid", O_WRONLY|O_CREAT|O_EXCL, 0644) = 6
---
Because this happens *before* we install "filesystem" (the package),
we mess up it's symlinking.
To work-around this, pre-install the trio of base packages (setup,
basesystem, filesystem) with rpm from outside the chroot.
Change-Id: I411b6ec9d91d95d3a0f98e76853086af3b70abe8
The Ubuntu Xenial cloud server images set the mode of
/var/lib/apt/lists/partial to 700, so when mounted it's inaccessible to
an unprivileged user, resulting in an error:
find: `/tmp/image.aDQKdkRi/mnt/var/lib/apt/lists/partial': Permission denied
There's no reason an image should come with anything already in
/var/lib/apt/lists/partial, so just avoid trying to descend into that
directory when fixing the apt translations packages.
Change-Id: Id27f0166bfb09d67200f337a5ffff2f2037b7c1c
This is a slight refactor I found useful when debugging. The
udevadmin info query will be visbile in the output of "set -x" which
helps, and is the logs/journal.
We can also reduce some calls by keeping the value and just grepping
with a herefile.
This also does some error checking and bails out if it does not see
what it needs to continue.
Change-Id: I39c4d262f9c5ce53f6b83d95b1363a74834cf2c8
Tucked away in systemd-udev-settle.service is the following comment
# This service can dynamically be pulled-in by legacy services which
# cannot reliably cope with dynamic device configurations, and
# wrongfully expect a populated /dev during bootup.
The info that the growroot script is querying is populated via udev,
particularly the blkid bits of [1]. This creates a race-condition
where sometimes udev has been triggered and the rules have applied and
sometimes not. Obviously in the first case, the root disk is not
grown correctly.
systemd-udev-settle is mostly disabled on distros because it can cause
an increase in boot-time for systems with lots of disks; this is not
our situation so it makes basically no difference.
That said, I will investigate if some systemd people know even better
ways to do this (possibly the service should depend on block .device
targets in systemd, and then filter out and only apply to the root
disk?)
[1] https://github.com/systemd/systemd/blob/master/rules/60-persistent-storage.rules#L66
Change-Id: I453e3afcd953dfc29ab6c42ddc81e940cfa70ee0
A TODO was placed on the partitioning section of the vm element to
replace sfdisk with a saner (and less arcane) way of partitioning. It
suggested parted for replacement. This changeset should reproduce the
same disk label and partition layout as sfdisk, but with less ioctl
errors and version dependency. It will also ensure partition alignment.
Change-Id: I5d8d75131458b73bfb05f80f1bfa7e2970e004b3
We currently install pip from package in the simple-init element.
We should really allow users to select whether to install pip from
git or package.
Change-Id: Ia5e62b9635af90d81227274a1dd8f20474cdbf73
As described in the comment, there is a dnf equivalent of this command
that doesn't require us installing yum-utils (which drags in yum on
dnf-only systems such as f23)
This is a small consequence to this -- due to us not installing
yum-utils some installs will now be completely yum free. This causes
a breakage in ironic-agent 99-remove-extra-packages where we remove
the yum package. There is a long-standing bug/feature where missing
packages in a group of packages do not cause yum/dnf to exit with
failure, but uninstalling a single package will. Because we have made
the systems yum-free, the uninstall of yum can fail in this corner
case.
It has always been like this, so I'm in favour of the "ain't broke"
approach. To work-around this, I have just put yum into the existing
list of packages to be cleaned up. I have added a note to the yum
installer taking note of this behaviour for future reference.
Change-Id: I8bbdc07ccdb89a105b4fc70d5a215077c42fcd03
InfiniBand interface takes more time to bring up then
Ethernet interface. This patch just increase the retries
to 20 times, to make it work for InfiniBand as well.
Change-Id: I5c4842696207885552413ea2d053f2e90bd6803c
