Instead of charging ahead and failing because we lack dib-run-parts we
can fail in this case with a useful error message.
Change-Id: Ie10176b5a7019a0385796984ebbaf7742876925a
This element creates kernel and ramdisk files based on Fedora,
example:
disk-image-create -a i386 -o test fedora ironic-agent disable-selinux
Change-Id: Ifa133d1680b81cb87d32a405aa7d7b40fe91f835
Adds new disk-image-create --install-type option which
can be used to enable alternate install types. The
default install type is 'source'.
The motivation is to eliminate elements like
enable-package-installs which require coupling and also
don't work with elements in multiple element repositories.
This patch does not prevent you from using the previous
DIB_INSTALLTYPE_ variables to customize the install type,
rather it just changes the default so you don't have to
set it so often when using things like packages.
Change-Id: Icee98440fc2251728f2dca30e7c4789a0fd89b93
It is needed by the debian element in the root.d phase. (enviroment.d variables are not available after the base image is built)
Change-Id: Idb8f9795a619687569bcb0de774c87333d11b292
Closes-Bug: #1384103
This commit adds a new element named 'iso' to build a bootable
ISO image for the kernel/ramdisk emitted by the 'baremetal' or
'ramdisk' element.
Change-Id: I89d175a29e2d0bc64b47fe527f0d0f6875f6849a
The element builds dracut from source on Ubuntu because the
Ubuntu dracut package is broken and very old, so it can't be
installed properly and causes a number of other issues that
are fixed by using a newer version of Dracut.
This initial version should work in virtualized environments.
Further validation of its suitability for real baremetal
deployments will need to be done in the future, but this should
be sufficient to enable that work.
Regarding Dracut specifically, in order to limit the changes
needed in the existing scripts this element continues to use a
cut down version of the /init script that we were building for the
existing ramdisk. However, instead of running it as pid 0 it is
run as a Dracut pre-mount hook. This allows Dracut to set up all
of the hardware and system bits, while falling early enough in the
Dracut sequence to complete the deployment before Dracut would try
to boot off the hard disk.
bp tripleo-juno-dracut-ramdisks
Change-Id: I144c8993fe040169f440bd4f7a428fdbe3d745cf
After being deprecated two releases ago, finally remove any reference
for the support of first-boot.d
Change-Id: I08d67404ef48cad61db3b18fb86e970abfa5d2b6
When uploading images to multiple clouds it is possible that the same
image will be needed in multiple formats to accomodate hypervisors
across clouds. Update disk-image-create's -t flag to take a list of
desired output image formats so that a single disk-image-create can
output all of the desired image formats.
Change-Id: If121b2342ae888855ba435aa3189f039e985b812
Per [1], our current root label of cloudimg-root does not work with
XFS because XFS only allows 12 character labels. This change
addresses that by allowing a custom rootfs label to be specified
in the call to disk-image-create. There should be no backwards
compatibility concerns as the default label is unchanged. Any
external elements dealing with the label would need to be updated
to support this new feature, but should continue to work as before
as long as a custom label is not specified.
[1]: https://bugzilla.redhat.com/show_bug.cgi?id=1139584
Change-Id: I596104d1a63b5dc6549e8460a1ae3da00165ef04
Just remove globally /lost+found after the root and install phases, so
distribution elements don't need to do that by themselves.
Change-Id: Ic783e613bd8794aefd3f40c9a7c308d14cd04b8d
Add a --options flag that allows disk-image-create to send custom
options to qemu-img calls. It is useful for forcing compat into
qemu-img created images.
Usage:
disk-image-create --qemu-img-options compat=0.10 base ubuntu
Change-Id: I73ee2c86abc115220d51ffebbbe9ce3c4d92f188
Closes-Bug: #1329746
Add support for d-i-b to create tarballs, the primary consumer for
tarball images would be linux containers.
Change-Id: I27d67401f3e4415226a4a51e1dde46f739c0220a
The phrase is no longer needed as of August 23, 2000 with Nicaragua's
joining of the Berne Convention.
Additionally, in at least one instance,
elements/cache-url/bin/cache-url, its existence in the file between
Copyright lines is just weird and feels misleading, even though it is
not.
Remove all of the lines, because sanity.
Change-Id: I24fd76c2b4f66b8036010b5079db39ead729abee
save_image is used to copy kernel and ramdisks out of the image, which
we will sometimes want to keep the source, and sometimes not. However
for the main image itself, the temp copy is never kept, so use mv
rather than cp and avoid the excess IO.
Change-Id: I5a9f0d69ffee3e6b872a8927537ac17f02f5aa4d
A recent change[1] relies on IMAGE_NAME being available when
98-source-repositories was run. However IMAGE_NAME was previously only
exported if the -o option had been used.
[1] I7dbe9e163ad38a418cf2869a81e720de2c27dfb1
Change-Id: Ife3d94fd45a2e0e0948c17414c369e0e6e040442
In fb246a02eb we introduced an
ext4 option to allow root filesystems to be resized up to 1PB.
This appears to cause an ext4 resize2fs bug in some images.
When the issue occurs an image will hit a kernel bug when
cloud-init runs the resize2fs command during first boot:
kernel BUG at fs/ext4/resize.c:409!
In this commit we add a new option for max-online-resize
which can be used if a really large root partition is
desirable.
The root cause of all this is really a design problem in
DIB/TripleO at the moment in that we shouldn't have to worry about the
max size of the root file system when creating our images. Ideally we'd
just mkfs on the root file system itself. Much more efficient,
avoids this problem altogether...
I think the best thing to do today to avoid this is make setting
max-online-resize an option in DIB. This will allow us to stick
to the (well tested) ext4 defaults for most cases, and if someone has
need for a large root filesystem they can easily bump the setting. This
may be temporary until we either fix the design... or the ext4 fix is
released.
Change-Id: I371f62555d2753cec48790c8fd811c4342af925c
Closes-bug: #1280709
Fixes issues with option parsing. The --min-tmpfs and --image-cache
options where previously broken.
Closes-bug: 1282077
Change-Id: I40c62b16d854335902d1b6b5ceab7f0e1992623a
With smaller base images, such as Debian, the padding value used to
size the root filesystem does not leave enough room for grub which is
installed after the filesystem is created.
Change-Id: Ic2ab9e2efc9bf1b02f802ee47a36e3fff9c3512e
Occasionally cloud-init fails to resize the disk on first boot, this is
occuring because the filesystem has only 10% free. Nudging the disk size
up a bit more should give us a little more headroom so this is less
likely to occur.
I havn't been able to find out what value ensures we wont hit this
problem but I can say for sure this fixes all casses of the problem I
have seen.
Change-Id: Ib23f3a654151338ad91839e49b323b65b4054245
Converts our existing default root element code to be just a check
which exits with a failure message if no root/distribution element
is found.
Change-Id: I954a6abfd7871d5807b1a171a03fa98932410cff
Or environment variables like OS_USERNAME OS_PASSWORD will be stored
in /etc/dib_environment also. It's potentially unsafe.
Change-Id: I3a65d5bc0e4469a071db9ac23ebc82196a3f3feb
Adds an option for --image-size, which sets the DIB_IMAGE_SIZE
environment variable. Having the cli option makes disk-image-create
more consistent in that parameters are able to be specified via a flag
on the command line or an environment variable. Also, you may not be
able to remember all the environment variables that you can tweak, yet
--help will tell you about the cli parameters. Preserves the old
behavior as well where if DIB_IMAGE_SIZE is set in your environment, it
will be honored.
Change-Id: I195c9144a80ce7b8bd5809b57f2bed71a2cbdf26
the problem is that the journal isn't large enough to allow online
resizing. Solution is straight forward. So the file system can be
resized successfully to disk size specified in flavor.
Fixes bug #1233008
Change-Id: Ie84fb8aea8d334706574d1a8006ec9eaee5bb5be
DIB_IMAGE_CACHE will be a user override for the location where images
are cached. Default location is ~/.cache/image-create
Change-Id: I3e9b9f970864d555c9ec9436344b53f6d3d66dfa
In some scenarios, the required space in the tmpfs partition can be
larger (or smaller) than the default one, producing errors due to
the lack of enough space (or performance penalties for not using
tmpfs).
Using --min-tmpfs <size>, we can hint the working set size we'll need
and let dib choose to avoid or use tmpfs.
Change-Id: I7d5fe498302a100c8555ae542268e14b21f3a0c5
When compressing an image, this is done in the same dir where the raw
image resides, doubling the amount of space needed (scarce when
using tmpfs), and then it's moved to the .cache folder in disk.
Combining these two functions, we reduce the amount of space needed
in the tmpfs partition (when in use), and the compressed image is
created directly on the .cache folder disk, so there is no need to
move the compressed image after the process into disk.
Change-Id: I451d24bdd6fa0983414244135dff5e96c0549833
A user running di-b several times while developing an element may not
want to drop to a shell in all cases but may only want to do so if one
of their in target hooks failed.
This patch gives them the ability to do so, If break=after-error is set
then a user will be provided a in target shell taking over from where the
last failed command left off.
Change-Id: Ia2f7ac4c21b64b971f87f4ae9cb867981b13eb5e
(Based on review https://review.openstack.org/#/c/36009)
Scripts test for existence of ../share/diskimage-builder and
fall-back to ../ if not found. This allows scripts to run unmodified
from a packaged installation or a local archive/repository.
Change-Id: I0cf4c1fdb8e42ec284c56860cb15818632b93b9e
I missed the getopt parameter and forgot defaults are imported after
option processing. Untested code is broken code!
Change-Id: I133a691909d38e834c204950276a57f4884fc4ed
Complex image builds can download hundreds of MB of data from the
internet with many separate lookups. It would be nice to allow users
to ask for a fast build where those lookups are entirely avoided,
using locally cached resources (where possible). This new interface
allows users to signal to elements that they wish to operate without
updating cached resources, which will in turn allow us to avoid
checking for stale data at all.
As part of this I've also documented where we cache data, so that
things like the ccache cache dir and image cache files are not a
surprise to users.
Change-Id: I27f5de6ceaa4e9c6390721b7c434fe0908df84f5
Ramdisks are now built inside a chroot which is built by the normal
image build process. Doing so improves our independence of the
precise state of the build host.
This fixes bug 1194055.
Change-Id: Ibc254fbb9e7b404b5f38c1b35bcde8a4136e8e28
Move the ensure_nbd function call from the disk-image-create to the
disk-image-get-kernel. The image creation process does not use qemu-nbd
anymore.
Change-Id: I8ff2ad54f322a9e33d52408fa4e253a7b45900c7
The recent change to use loopdev instead of nbd stopped
honoring the DIB_IMAGE_SIZE setting.
This change adds it back, by resizing the image to
DIB_IMAGE_SIZE GB, if specified. If unspecified, it resizes
the image to (actual usage + 20%), as it did before this change.
Change-Id: I69afd9584e644ddacc948619100f153d3d8713a4
