Because we are using the building platform's "yum" to do the initial
install into the chroot, it is affected by the base-system's
/etc/yum.conf.
pip-and-virtaulenv in I82acb865378a0fa5903a6267bfcee0e2962eced0 added
"exclude=python-pip..." in /etc/yum.conf to stop the package manager
overwriting the installed pip. Now our CI images have built with
this, we are now picking up this exclude on centos. Since on F24
dnf->python->python-pip we end up failing to build the the chroot
because python-pip can not be satisifed. In a general sense, however,
this could be caused by any configuration put into /etc/yum.conf that
is incompatible with installing into the chroot.
yum has the option to disable all excludes which is used here. This
seems to be the best way to isolate the chroot install from any
excludes that may have been done on the base system for various
reasons. I did consider using a completely separate yum.conf we ship
with dib ... but let's start simple.
This should fix the current gate failures on centos
Change-Id: I4e4cc8ed09a29c4057ade34ea93025139e191bf5
yum-minimal installs selinux but not libselinux-python, which makes
interacting with the node from ansible hard fail. Add it.
Change-Id: I403e7806ae10d5dd96d0727832f4da20e34b94c7
Add support for new openSUSE Leap releases. Moreover, document
common environment variables and remove old note.
Change-Id: I8cf0b215cb4d9231e5658d49e3fd598dfbb5fd37
The previous commit removes dkms from the base element, which
means the centos elements should no longer have a dependency on
EPEL. Therefore, we should not hardcode the epel dependency. It
can still be included in image builds as desired by using the epel
element explicitly.
Co-Authored-By: Ben Nemec <bnemec@redhat.com>
Change-Id: Iceff0d5bedd9816adfd2990970e7c216b67b6bd0
The use of dkms in base was actually removed long ago in
Ic2c345bf9f0738dadae611194e263d3a5d424a3e and it is creating an
unnecessary dependency on EPEL for the centos elements.
Change-Id: Iae3100471e50a9c39f40b450f087192918ae54b3
This fix add need kernel module for Infiniband and ConnectX-4+ network
cards.
Also install by default required user space packages.
Change-Id: Ia2e7b1820f197778138a23fafaccb5a4fb44369a
On systemd-based operating systems that don't
use /etc/sysconfig/network-scripts
dhcp-all-interfaces configures 'lo' for dhcp.
This causes errors and fails networking.target
causing system-wide issues. This change excludes
'lo' at dhcp-all-interfaces udev rules level.
Closes-bug: #1621501
Change-Id: I7563b766827bedbea7ae1de35e5bdfcbf1fc0d1e
Co-Authored-By: Jeremy Stanley <fungi@yuggoth.org>
Dependency to start network-pre (which
depends on network.target) before
dhcp-interface@.service collides with
Ubuntu's own network.target that suupose
to start after network-pre.
Change-Id: I9e59c970bfb1ebdaa15b4ec6b545761ede3ca056
Closes-bug: #1619816
Running the functional tests is time consuming. This patch adds the
option `-j <job count>` to the tests/run_functests.sh: when given the
test run in parallel up the <job count> jobs.
When using this, be sure to have enough resources (CPUs, RAM and HD
space) on the host.
In addition there was the need to change two things:
o Global /tmp/dib-test-should-fail was move to temporary build
directory of each execution.
o Because the logs might now interleave, each log line has now a
prefix of the name of the testcase.
[In my environment running functests sequential takes 15+ minutes,
running them parallel takes less than 6 minutes.]
Change-Id: Id9ea5131f0026c292ca6453ba2c80fe12c47f808
Signed-off-by: Andreas Florath <andreas@florath.net>
It is possible and often desired to install glean from a source
repository when using the simple-init element. Document the process for
doing this.
Change-Id: Ie7c690406b14aae07d73261879b7ce8a2ed9dd8d
IPv6 privacy extensions can cause issues by preferring a temporary
network over a public one. This preference may limit connectivity
in certain situations. An example of a connectivity issue can be
seen where the command ``traceroute6`` fails or misses all hops
while other traffic to a given domain with a "AAAA" record may
succeed. To resolve this issue the IPv6 privacy extensions have
been disabled.
Change-Id: I62b9d6301b9e8b8e93b49cecbc96334ceea92fa5
Related-Bug: #1068756
Signed-off-by: Kevin Carter <kevin.carter@rackspace.com>
Currently, ironic-python-agent is installed without using an
upper-constraints.txt file.
This commits ensures ironic-python-agent is installed using
upper-constraints.
Change-Id: I6be6cfc012941e2cc9996717cba39b5415b85e14
Closes-Bug: #1616554
Explain difference between 'DIB_OFFLINE' and
'DIB_DEBIAN_USE_DEBOOTSTRAP_CACHE'
Those variables are not redundant,they hava different effective ranges.
However,some people may be confused about this and reported a bug.
So,this difference should be writen in the README file.
Closes-Bug: #1506275
Change-Id: Ie5316de41d129bf98781708954f09ef0b2592b53
During the creation of a disk image (e.g. for a VM), there is the need
to create, setup, configure and afterwards detach some kind of storage
where the newly installed OS can be copied to or directly installed
in.
Change-Id: I0a43e247fb9e258e3983db35362f627416983773
Depends-On: I7bd7e9fa94635621590f72702107e218155fef2a
Signed-off-by: Andreas Florath <andreas@florath.net>
Currently we update portage whenever we could need it. Instead we
should update portage only if we actually need to. This update adds a
check to do so.
Change-Id: Ifdb27fd844b0b3a169ced945ac7ee0ddc235e9ec
Gentoo has updated it's grub ebuild to default to the upstream
recommended installation parameter of grub-mkconfig instead of our
default multislot installation of grub2-mkconfig. Update the command
line parameter so that it works with both.
Change-Id: I359b44338a4f76af7c026f5cad212e6dc3dbf2b3
It's possible this is run form an environment where $USER isn't set,
properly fallback to whoami in this case.
Change-Id: I1181f714c3c456ee264b34d282bac5c0adb67a0e
Storing the du output in a variable seemed convenient, but I didn't
realise just how big it could get especially with things like infra
images -- there's something like 100MiB of text being stored in a bash
variable here.
Convert this to work with a temporary file
Change-Id: I6a6d22c2142e0f199490c39cca8c94769e4b0232
There has been some confusion about what this environment variable
controls, and it isnt very clear in the docs.
Change-Id: Id21b3c5ce361c4d1121eb7015020235b4c0a2f36
Even though this file ends up in the /tmp directory, for readability
it's good to point out that server.pem is not necessarily the
certificate for a server, but can be a CA certificate which is
trusted if this option is used.
Change-Id: Iea27a702a844456e4472957438f75ed3819d62ca
For some use cases, it can be useful to keep all the kernels
and not just keep the latest one. Add a parameter that allows
it, and continue cleaning up kernels by default.
Change-Id: Ia6e6c1fa18e3724c1eb89226151d81e9e748b793
Currently we do not have a dib-specific specs repository. Technically,
we are part of the tripleo-specs repository but dib-core does not imply
tripleo-specs core. To fix this and to encourage the use of specs lets
create a specs process that lives right in tree.
Change-Id: I7bd7e9fa94635621590f72702107e218155fef2a
Kernels are built with auditing support, and without the audit deamon
logs bubble up to spam the console and /var/log/messages. This
package contains the audit daemon that catches these messages.
Change-Id: Ie3e216bab33b27f2d67a9379ddc3e89d66449251
Sometimes the secure_path option value in /etc/sudoers is surrounded by
quotes, in this case the current command creates an invalid entry and
it's not possible to sudo anymore.
This fix adjust the sed command to deal with possible quotes
Change-Id: Ifd6f9e29b3c0d04d6f65d3f55524ad202fb3294e
Optionally remove portage files, so that we can cache package and
keep the portage directory around, specifically for nodepool.
This also adds a section to the Gentoo readme about the variable
and renames the 00-gentoo-distro-name environment file to a more
appropriate name of 00-gentoo-envars.
Also brought up was the location of the gentoo-releng.gpg file,
this has been moved and the refrencing paths updated.
Change-Id: I20c91b36082828faa1ca481585acc5f9933211e1
Since the ironic-agent element builds the ramdisk and extracts the
kernel itself, there's no need to actually generate an image at the
end of the process. Previously the unnecessary image was being
deleted, but this wastes a bunch of time compressing and converting
the image. It's better to just not create the image at all.
This change adds a noop element called no-final-image that
disk-image-create looks for in the element list and, if found, will
cause it to skip the final image generation. This is more flexible
than the previous ironic-agent-specific method that would have
required changes to disk-image-create for every element that wanted
to behave similarly.
Note that this cannot be done using an environment variable, because
element environments.d entries do not propagate out to
disk-image-create. It also doesn't make sense as a user option
because it should be set by the element author, not the user.
Change-Id: I168feb18f0d578b3babbe4784d3ef75e755e1ebd
Most of the time,no useing no_proxy is ok,but sometime this will cause problem.
Add no_proxy here will increase the robustness of the program .
Change-Id: I976e689760d2e6de9e2081fcdee4f71299e8470e
