The wrong APT config name is used to disable download of translations.
It's Acquire::Languages, not APT::Acquire::Languages.
Change-Id: Ie0c12d444bab19b4486845944ef51031e9133470
Closes-bug: #1436523
Not all operating-system elements install cloud-init, but the base
element assumes its existence. Create the directory if it does not
exist.
Change-Id: I4bda8dc5d200825ea0c8163a4e5c44050a45083f
it may happen that if the system where disk-image-create runs is busy,
then the kpartx -l run may leave a stale autodelete loop device.
This is because kpartx -l first adds a new loop device, then does the
listing and removes the loop device. The latter may not end before the
end of the kpartx run, leaving a loop device marked as autodelete.
Such kind of loop device will automatically delete itself, so the
rm -r $WORKING
after
sudo umount -f $WORKING/mnt
in the EXIT trap will fail because $WORKING does not exist anymore.
To prevent this situation, just ask udev to finish its operations,
properly removing the (temporary) loop device.
Change-Id: I12246f3dbe6b5669e698767682a5a142f803823b
RHEL 7 does not ship tgtadm or tgtd so they cannot be used in the
deploy ramdisk. This change separates the tgt-specific parts of
the ramdisk into their own element, and adds a new one that supports
targetcli instead.
For now, the tgt implementation can only be used with traditional
busybox ramdisks and the targetcli one can only be used with dracut.
This is because dracut is primarily used for RHEL right now so it
makes sense to keep the dependencies simple. If there is a future
desire to mix and match the implementations that could be done, but
it would require users to explicitly select between tgt and
targetcli.
Change-Id: I4f99c91016287e08d836095c2f2261de8b45abdc
Co-Authored-By: James Slagle <jslagle@redhat.com>
It is reasonable that elements may need to include additional
kernel modules in a dracut ramdisk. This is done with the
--add-drivers option to dracut, but previously the value passed
was hard-coded.
This change allows an element to put a file containing its desired
drivers in a dracut-drivers.d directory, and the list there will
be added to the list of drivers added. This functions in
essentially the same way as the binary-deps.d directory that
already exists for including additional executables in a ramdisk.
Change-Id: Ie892b908d36c175a469f7cde7dd803ad4b1942b6
This is required on Fedora 21 in order to build some
packages via source. Includes files like:
/usr/lib/rpm/redhat/redhat-hardened-cc1
Specifically this fixed MySQL driver compilation issues on Fedora 21
for source builds.
Change-Id: I459f2203fa145049dda185da952813118193d573
Official MariaDB repositories offer the package : MariaDB-Galera-server.
This package has been now ported within Fedora (and also RDO), the
package is now called mariadb-galera-server. Yum install being case
sensitive hence this change.
Change-Id: Icd03877f17d01708b3916578991e42eef30a69e4
As part of the blueprint root-device-hints Ironic will pass some to the
deploy ramdisk some hints about which disk device it should pick to be
root device (the one where the image will be deployed on).
Before the deploy ramdisk would pick the first device it finds, but as the
machine could have more than one SATA, SCSI or IDE disk controllers the
order in which their corresponding device nodes are added is arbitrary
causing devices like /dev/sda and /dev/sdb switching around on each
boot time.
Plus, as people are adding support to build RAID arrays in Ironic we need
a way to tell it to use the just created device to be the root device.
The list of hints that could be passed to the deploy ramdisk so it finds
the right disk is:
* wwn (STRING): unique storage identifier
* serial (STRING): disk serial number
* model (STRING): device identifier
* vendor (STRING): device vendor
* size (INT): The size of the disk in GB
If not hints are passed, the deploy ramdisk will continue to do what it
did before to find the disk.
Change-Id: I8425f593e1a610af5a3697988702603ff218f2de
This commit adds support for uefi localboot in
deploy-ironic element. The change is to mount the efi
system partition (created by Ironic) in /boot/efi.
The corresponding Ironic change is
I00ac31da325676ea4ea1ac4185f5ac3a52c5809a
Implements: blueprint local-boot-support-with-partition-images
Change-Id: Idf7ac5987e14e1d31311834196ca7283deec15c6
Commit 36b59c001c introduces
DIB_DEBUG_TRACE, to be checked in element scripts for enabling tracing.
In the aforementioned conversion, few scripts were left with
unconditional "set -x" calls: remove them, changing the default value
for unset DIB_DEBUG_TRACE from 0 to 1, to retain their older behaviour
(as it was done in 36b59c001c too).
Change-Id: I3d1a9290021bf63de7d4e7752e809852e784ac8b
Previously, this code was not checking for the proper environment
variable for an element's installtype. There was a line replacing '-'
with '_' as is required, but that value was not actually used when
searching for the environment variable.
Change-Id: I0bbd56969188389db81844d9276269464870f776
/tmp does not contain anything useful anyway, and excluding its content
makes the initramfs smaller too.
Change-Id: Ia72867e0cdebacf668ac1a1f551a965da0d69694
This adds support to UEFI secure boot by copying signed shim and
grub bootloaders into ramdisk image.
Closes-Bug: 1419707
Change-Id: I1193cd3a9011855a6804966a31c7c0e28da90ada
The newest stable Fedora splits out kernel modules into
a separate package. By default this is not installed in
the Fedora cloud image... and it contains some things we
need for Ironic (iscsi_tcp module) among other things that
might be very useful.
Change-Id: I3374ea278fecfeb6552e4664717ef3646d382c17
Closes-bug: #1429504
The other distro elements set DIB_RELEASE which allows the other
elements to know what distro release is being built during the
extra-data or environment.d phases.
Change-Id: I00bf13410ded5b678ebc66ff191891ed3cc80f4f
This is the centos element, which builds CentOS 6.
There are a couple of modifications to redhat-common because
the version of tar in el6 doesn't support --xattrs-include.
There is a change to both pkg-map and svc-map to add 'centos'
to the 'redhat' family.
Also explicitly have to install cloud-utils growroot and
dracut growpart for proper fsresize at instance launch.
Also sets the DIB_EXTLINUX variable because there is no grub2
for this distro.
Change-Id: Iffd57bce1484c43c2cffcbdb37b602185216e63a
The construction of the combined svc-map-services file uses the host's
/tmp directory to store a work-in-progress file. That file's left behind
after it's done with.
There's a potential race here; together with problems that may arise
if two users attempt to run devtest on the same system.
This patch fixes this by creating the temporary file specifically under
$TMP_MOUNT_PATH.
Change-Id: Iecbdc583e37bed542249c316919c3712c28c7440
This allows them to install packages already specified in .yaml files
for them, which are not installed otherwise since the migration to .yaml
files.
Change-Id: Iac8c7eb55116938616e5299b84487cd52e0cbf6f
openSUSE appears to have redone their fs layout on the repo site
and also changed the naming scheme of their image file.
Change-Id: I75afe54b88ea531d3c1f3b7d85e5435cdacabed2
subprocess.check_output() has been introduced in Python 2.7, so the
script will fail when trying to install stuff in guests with Python 2.6
and older (like RHEL 6 / CentOS 6, for example).
Thus gracefully fallback to subprocess.Popen() when
subprocess.check_output() is not available.
Change-Id: I335148397932177810f095a942b993b249991107
Closes-Bug: #1415240
A recent commit (I29c73355a85112840b57f93b39a9eeda421875e6) updated the
epel element to rely on wget, but wget is not always installed. Since
wget is used in pre-install.d, we must install it in that phase.
Change-Id: Iad2a9c4f0081835a1aa78e6fd2f721f6afd44dc2
Also make the apt-sources element exit with a non-error status code
when the DIB_APT_SOURCES is not set.
This allows including the apt-preferences and apt-sources elements
even if DIB_DPKG_MANIFEST and DIB_APT_SOURCES are not exported.
Change-Id: I8507dd9c69d1371eab38f720dcfdd89aa5345e8b
When there is no pkg-map file for the specified element, list the passed
packages if --missing-ok is specified.
This mirrors what is being done already later, when a pkg-map file
exists but it does not have the mapping for the requested package.
Change-Id: I50287f8e6a5e4335deb3de2252075b8bfdd53ce5
epel-release 7.2 has been superseded by 7.5, so update accordingly.
this time, detect the available epel-release package from the repo
instead of hardcoding version number which will break build each
time the version number gets bumped up.
Change-Id: I29c73355a85112840b57f93b39a9eeda421875e6
Pip now supports retries on failure. If setting multiple pypi mirrors a
fallback will not occure until the failures have finished for the first
mirror. This can cause a substantial delay if mirror fallback occurs a
lot.
Change-Id: Iad37a9015a2d5c861a345a111bd1725b965a42d3
We don't export DIB_RELEASE in the base distro scripts, so many
times it will be an unset variable in 51-bootloader from the vm
element. Currently that script doesn't handle the situation
properly and we get errors like:
line 160: [: =: unary operator expected
This change quotes the references to DIB_RELEASE so that won't
happen anymore.
Change-Id: Ic8f91804334f8862c217f465be80e96d3116f5c8
We have a good pattern of namespacing env vars with DIB_. Add support
for DIB_PYPI_MIRROR_URL* and maintain backwards compat support.
Change-Id: I434c9d1b14cd571b20754c9ad7cd64c936f8399a
As we started using jq it makes sento to use it everywhere when
building a resulting JSON.
Also removes some unneeded code.
Change-Id: Ib1391dc9f4e1463a9a3d0c13909ff60e3c993e82
When setting IPMI credentials is requested, ironic-discoverd
will return ipmi_setup_credentials=true, ipmi_username and ipmi_password
in response. Use ipmitool to set credentials in this case.
Change-Id: I8ace9e817e5ce9dbfb8564feec4a3ce6c0e1b233
There is a wide variety of tracing options through the various shell
scripts. Some use "set -eux", others explicity set xtrace and others
do nothing. There is a "-x" option to bin/disk-image-create but it
doesn't flow down to the many scripts it calls.
This adds a global integer variable set by disk-image-create
DIB_DEBUG_TRACE. All scripts have a stanza added to detect this and
turn on tracing. Any other tracing methods are rolled into this. So
the standard header is
---
if [ "${DIB_DEBUG_TRACE:-0}" -gt 0 ]; then
set -x
fi
set -eu
set -o pipefail
---
Multiple -x options can be specified to dib-create-image, which
increases the value of DIB_DEBUG_TRACE. If script authors feel their
script should only trace at higher levels, they should modify the
"-gt" value. If they feel it should trace by default, they can modify
the default value also.
Changes to pachset 16 : scripts which currently trace themselves by
default have retained this behaviour with DIB_DEBUG_TRACE defaulting
to "1". This was done by running [1] on patch set 15. See the thread
beginning at [2]
dib-lint is also updated to look for the variable being matched.
[1] https://gist.github.com/ianw/71bbda9e6acc74ccd0fd
[2] http://lists.openstack.org/pipermail/openstack-dev/2014-November/051575.html
Change-Id: I6c5a962260741dcf6f89da9a33b96372a719b7b0
Both ccache and linux-image-generic were being installed by
install-packages rather than using a package-installs.yaml.
Change-Id: Ib54c5b51d605278bb9d046a897be989c17c6fb0f
Patch adds support to create PowerPC image with vm element.
It creates 2 partitions, one for PReP boot and other for root and
installs grub-ieee1275.
Change-Id: I4675ef2b82aa69b63e63a1cc7db01b0c0e6f9fff
Closes-Bug: 1418739
If there are no old-style package-installs and the package-installs
element is included we fail because we call install-packages with no
arguments.
Change-Id: I3c78b51d0a2673ecc581f9faded078974dbc27b7
Since the package-installs-squash script relies on the defined
environment variables for figuring out what the values are for an
element's install type and the default install types, sudo -E must be
used to preserve the environment.
Change-Id: Ice5cf0bca65d8078f84daedbef123fc73d5a7b63
Working on host systems without selinux, where the guest image
does have selinux, creates a situation where the instance will
have about a 1 minute delay on first boot because it must relabel.
The previous check for sysfs assumes that the host system has
selinux, which is not needed for the guest setfiles to work.
Change-Id: Ic186a45991b6d80880ad635e9c80985612f53a05
Closes-bug: 1414200
This patch extends the deploy-ironic element to make it install a
bootloader on the disk in case the boot_option parameter passed in the
kernel command line is set to "local".
This parameter is set by Ironic as part of the
blueprint local-boot-support-with-partition-images
Change-Id: I5ebe6f364ae0ac408939399e5f28728b41c4766e
Patch adds support for PowerPC Big-endian and Little-endian local
fedora VM images and using VM images with two partitions, PReP
boot and root partition. Since PowerPC requires PReP boot
partition to be present.
Change-Id: Iba03226e187609df898732c13b1aa5f895b156e3
Closes-Bug: 1413487
ramdisk-image-create assumes the presence of vmlinuz file in OS image.
But ubuntu PPC LE images have only vmlinux file. This patch adds
support for using vmlinux file.
Change-Id: I5dd0b8ceb46b73be57d4c15b39b96f99b524fa3f
Closes-Bug: 1413362
When set to true this cloud-init setting overwrites the /etc/hosts
file at reboot, breaking stuff in TripleO where controllers rely
on resolving each other by name. We still want cloud-init to add in
there a mapping for the local fqdn, so we switched to 'localhost' [1]
1. http://bazaar.launchpad.net/~cloud-init-dev/cloud-init/trunk/view/head:/doc/examples/cloud-config.txt#L470
Change-Id: I85468dece3b67f39841aa826f9b7ca4bf113027a
Closes-Bug: 1411594
This commit adds http_proxy=$http_proxy to use apt-get update through a
http-proxy.
Change-Id: Iee589f6d11b84991512493d22f0e3dbfe60736ec
Closes-Bug: #1412314
The rhel-common element has a script that uses subscription-manager
to register an instance of RHEL with the customer portal or Satellite.
If os-refresh-config runs this script more than once,
subscription-manager returns a non-zero value causing os-refresh-config
to fail. Adding --force to the subscription-manager calls doesn't
properly unregister the image from Satellite and the result is multiple
content host registrations. This patch changes the registration to only
run once.
Change-Id: If372e7f59bbdc77e2b233024c1342f005004f2e5
Previous to the Sattelite 6 release, the katello-agent and it's
dependencies needed the rhel-7-server-rh-common-beta-rpms repo
enabled. Since the the release of Satellite 6, the "beta" can
be safely dropped. This fixes an error where registration to a
satellite instance fails due to a 404 for the beta repo.
Change-Id: Ia9879498c7db0c912bb58ea084d448b8b3915569
The dpkg element was hardcoding ~/.cache/image-create as the cache path,
but elements should use DIB_IMAGE_CACHE as the root for the cache to
allow users to override the path. Replace the hardcoded path with one
that is rooted at $DIB_IMAGE_CACHE.
Change-Id: I76030654e7dfc7b7d4dfa87e082c14e7cee479b9
The correct workflow for building RHEL6 images includes not using
the rhel-registration scripts in this element, but rather the 00-rhsm
script. This patch updates the return value from 1 to 0 for the case
when the REG_METHOD is left unset. This will allow the RHEL6 images
to build without needing to set REG_METHOD. This patch also improves
the note about RHEL6 image building.
This patch is the result of the discussion in the comments of [1].
[1] Iff7b9fc30d5a36231598a977a9edcd55229766c5
Change-Id: I2f35b8d7d8749d44d88f06e9e2c3116ff93b88fe
Closes-Bug: 1404364
When using the rhel element, it can be uesful to disable registration.
For instance, if using an internal mirror repository that does not
require registration/authentication.
Change-Id: I42fa34e7f146137e5b1b9c5d7785702311e1dca1
Copy all of TMP_MOUNT_PATH into the ramdisk so that
ramdisk-install.d actions are respected.
Includes a workaround for a bug in Dracut that caused the copy
to fail.
Also moves init instead of copying it so we don't conflict with
the Dracut init.
Change-Id: Ia8d7b210369fe7eb7ab239cbdb7f96841104a35d
Closes-Bug: 1403121
These scripts are littered with references to passwords and keys,
so rather than try to disable tracing in every one of those places
I propose we simply turn it off for the scripts. This will likely
need to be revisited after the global tracing discussion is
resolved anyway.
Change-Id: I805015300bf01b2f8eec9f70ccfdf533dd9386b3
Related-Bug: 1298205
The latest update to package-install captures both stderr and stdout
from pkg-map, unfortunately, pkg-map has a 'missing-ok' option
which causes it to print an error message on stderr.
The result is that package-install tries to look for packages named
"Missing", "package", "name", etc.
Change-Id: I86b3b71a64b29d533b42fd0cae020e8ecf22cac2
Closes-bug: 1402085
The element was prepending the work directory forcibly, which will have
problems when the image name has an absolute path, which is allowed.
Change-Id: I0cb7b96e24daab8ee73611936af72074c70ac1aa
Closes-Bug: #1400405
Ubuntu has recently release their "Snappy Ubuntu Core" which is a
minimal base-layer for running docker applications. Seems like the sort
of thing someone might want to use for tasks.
Change-Id: I6cb724451d1862121dee4ccf1f599ab8938f0b7f
VMs on Rackspace Cloud need nova-agent installed to get networking
information set up properly. Add a nova-agent element so that dib can
be used to create images to use on Rackspace cloud.
Change-Id: I075a50e9a2d7ae7641905b66bbbc627ad708b5ea
There are times when a much more stripped down base image is desired
over the distro cloud images. For instance, Infra would like some base
images that do not have cloud-init or really much of anything else. This
is easy to accomplish with debootstrap and rinse.
Change-Id: I44ff22457165afb048fdaea469210ae47d83dd3f
Instead of doing the work in the image of parsing through the element's
package-install declarations, we can squash it on hostside, where we
have both YAML and JSON available to us, and then emit a single
pre-processed file into the target to be used later.
Change-Id: I3f182aa3aae0a79b2f3ea4e66c1878ad12878b0a
Depending on bootloader and configuration, ramdisks may receive
a ip= kernel parameter that is used for manual network bring up
in the ramdisk. This parameter contains the address of the boot
server. In the absence of ip=, we want the ramdisk to DHCP and
proceed as normal. However, in this case need to know the address
of the boot server. This falls back to a 'boot_server' parameter
for this address if it is not provided via kernel cmdline.
Change-Id: Id1ed15ba125d91fa0a13d8e19d1385082ee5d9e9
Closes-bug: #1401289
Related-bug: #1401298
The docker build folks obsess about image size and speed a bit. Grab a
few of their optimizations from their debootstrap build process and
apply them to ours.
Change-Id: Ic3d3565423b0ae090896d99fd3bf1145eca6303d
The username and password combination is considered insecure to store in
the metadata passed to the stack as they can easily be obtained and
possibly used in an unathorized manner by logging into one of the
registration systems. The use of an activation key is more desirable
as it can only be used in conjunction with subscription-manager to
register a RHEL system.
This patch deprecates the username and password support from the script
that registers RHEL with either Satellite or RH Customer Portal during
boot-time. This patch also adds a warning if the username and password
combination is used in the stack metadata. The documentation and examples
have also been updated to warn operators of the deprecation of username
and password.
This patch does not affect the username and password support for
registration activities while building images with diskimage-builder.
Change-Id: I05b7a18e910d31ad2273042409f8657ad9dee36a
Previously the REG_REPOS value was a space delimited list of repo
names, but the spaces were incompatible with passing through json.
If you pass a list in json through the heat parameter, the output
is the string representation of a python list of unicode vaules.
This patch changes the rhel-registration scripts to process the
REG_REPOS value as a comma delimited list which is more easily
passed through json. Both scripts have been updated to remain
consistent.
Change-Id: I21b3fd115e53aa3b0fa4af9bbfb1f08b6fe163ab
Allows specifying the path to a yum repo configuration file to be used
during the image build process. The repo configuration file is removed
at the end of the build. This is useful in that it allows using any
arbitrary repo configuration during an image build.
Change-Id: I7d5c67d74a0bb4722ffc60aacfd9fa7e80fb59d5
Using lsb_release to figure out what distro and release an image is
is redundant, as the same information is available in DIB_ vars.
Further, it causes errors when creating new rhel7/centos7 images
like this: http://paste.openstack.org/show/144729/
Change-Id: I213ee581b8abfe119ffe3b783e6a3236e58e3e47
The file extention claims rst format, but it's plain text
as such, the online documentation doesn't render properly
Change-Id: I24accb45ab8c7803a25f2642ce1b2d479d5a6e9c
This patch adds support to register with the hosted customer portal
using activation keys. If an activation key is present in either
the REG_ACTIVATION_KEY or rh_registration.activation_key, it will
use that value instead of username and password credentials when
registering with Satellite or the hosted Customer Portal. This
patch also enforces that an org must be set in either the REG_ORG
or rh_registration.org to use the activation key.
Change-Id: If40dd78ba793d508afb1a5ab345470ee5929afb0
We have a new package-installs file format. Migrating existing
package-installs files to the new format.
Change-Id: I57d4a007efee9624e60c41357cefa627d8c7373f
We currently support package-installs definitions which has some
limitations and oddities. This new format requires only one definition
which does not reside in our run-parts directories and follows a
consistent naming scheme (package-installs.yaml).
Change-Id: Ie51a7c4fdc15634ae8e069728e5e07cc1dc36095
Fedora sets requiretty globally by default. This makes sense for
interactive machines with lots of password typing, but is pretty
attrocious for machines that might need users who remotely sudo to do
things. Just remove the setting.
Change-Id: Ic32bd92061a73f854683cc0d2d8919071dabe8cf
We immediately remove this, but the -grub2 causes a later attempt to
remove it again which fails. Don't install it in the first place.
Change-Id: I31d64abc9596707bdb8a0505d0dcbf7b82e1b82d
sudo is not needed, since in-chroot elements are run in the context
of the root user. Furthermore, sudo in pre-install is problematic as
sudo may not have been installed yet (imagine a debootstrap build)
Change-Id: Ib5c7e176a90fe3b8fa9c3cd702d3d815df54f472
ironic-discoverd [1] is a StackForge project for conducting hardware properties
discovery via booting a special discovery ramdisk and interrogating hardware
from within it. It aims to be one of the official means of hardware properties
discovery for Ironic in Kilo release [2].
The ramdisk collects hardware information from the machine
it's booted on and posts it to the URL provided via
kernel argument 'discoverd_callback_url'.
[1] https://pypi.python.org/pypi/ironic-discoverd
[2] https://review.openstack.org/#/c/135605/
Co-Authored-By: Lucas Alvares Gomes <lucasagomes@gmail.com>
Change-Id: Ic81fe8b3bd0884971bb522b48658c7ee538a31f2
Using only a local filesystem mirror could lead opaque errors.
Print a warning message in this situations.
Change-Id: I5f77151ea928868f4c441e8a1bb2eb0966b21832
Closes-Bug: #1297948
An app using pkg-map (like package-installs) might want to distinguish
between a hard error (invalid pkg-map file) and a soft error (no
mapping found). Currently this is not possible because we only return
with error values of 1.
Also printing error messages to stderror so we can still make use of
stdout data during a soft error.
Change-Id: I8bef56d3a74e8530afb8c58ac50ca3e9f7700639
We check python files with dib-lint rather than flake8 which have
conflicting opinions. This means weve been (forcibly) writing non pep8
python.
Also fixing pep8 issues so tests pass.
Change-Id: Idc9db40334f6e15738a7802c06697270df68741c
This patch updates the 00-rhel-registration script to not
not fail a stack when metadata isn't found.
Change-Id: Ie305fed79e4baadf1a03c4a3d06a23cf36e92f77
This patch writes a warning out to stderr to notify element authors
that may be using map-packages to migrate to pkg-map. This patch
also prints out a warning during image-create that lists the specific
elements that are not using pkg-map.
Change-Id: I7e2a7611dd5650815736ce998aa94a7833193d06
The source-repositories element puts source in place in the generated image
for later installation. It is possible for two elements to define the same
source to later install, and as long as the remote location and reference to be
installed is identical, we should not error.
Change-Id: Ic7dfb1961486c59d2005b5c1e7587267ea42e999
This allows extra arguments to be passed to the debootstrap
command when creating an image using the debian element.
Change-Id: I87eb856365ff6a17f051e2e56587235648328d57
Co-Authored-By: Ghe Rivero <ghe.rivero@gmail.com>
It was depending only on deploy-baremetal. Changing it to 'deploy' could
be used with both baremetal and ironic deployments
Change-Id: Ia2600080b488f7d259a9baf111767e82b6cc933d
These are already listed in the respective deploy-* elements, and
if we include them here then they get added to every ramdisk built
with dracut. That causes issues for elements that don't need
something like tgtd because it won't be installed and the
binary deps script will fail.
Change-Id: Ibdcf7d200d4f7136396b63404cd966f7557043e0
This element creates kernel and ramdisk files based on Fedora,
example:
disk-image-create -a i386 -o test fedora ironic-agent disable-selinux
Change-Id: Ifa133d1680b81cb87d32a405aa7d7b40fe91f835
We don't actually need a real value for the root kernel param, and
requiring one causes problems for things like the discovery ramdisk
that don't pass in a disk= parameter. Dracut seems to be happy to
take /dev/zero as the value, so we can just always use that.
Change-Id: Ia724f0214c26aa18c6f8f41f2c48d7f25b52ee6c
This patch writes a warning out to stderr to notify element authors
that may be using map-services to migrate to svc-map.
Change-Id: Ic80db16c607958d025e89b3a4058a9cbb568938e
The URL we were using to download lsb_release from no longer works,
install from package so this is not affected by disappearing URL's
in future.
This was originally installed from a URL because the package dependencies
caused a 87M increase in the size of the base image. For fedora the
increase is now 27M which is a little more tolerable.
Change-Id: I6e56a4a81786b33c5c6b92df2bd8236cd3f19670
This patch documents the 00-rhsm script as <= RHEL6 as it doesn't
work with the latest release of Satellite. The Red Hat Network
(RHN) method of registration is being phased out in favor of Red
Hat Customer Portal and Satellite 6. The subscription-manager
command line tool is the preferred method of registration.
The registration of RHEL is required to enable repositories for
software installation during image creation time.
This element provides functionality for registering RHEL images
during the image build process with diskimage-builder's
disk-image-create script. The RHEL image will register itself
with either the hosted Red Hat Customer Portal or Satellite to
enable software installation from official repositories. After
the end of the image creation process, the image will unregister
itself so an entitlement will not be decremented from the account.
Boot-time registration is supported through metadata. Please see
the configuration in the README for more information.
Change-Id: Ia9ef377cc4ed9595633888bfb248a1224e04b542
Adds new disk-image-create --install-type option which
can be used to enable alternate install types. The
default install type is 'source'.
The motivation is to eliminate elements like
enable-package-installs which require coupling and also
don't work with elements in multiple element repositories.
This patch does not prevent you from using the previous
DIB_INSTALLTYPE_ variables to customize the install type,
rather it just changes the default so you don't have to
set it so often when using things like packages.
Change-Id: Icee98440fc2251728f2dca30e7c4789a0fd89b93
I would like to recommend to use + instead of \; in the find
command. As this will ensure the removal of all selected
directories in a single invocation.
Hence improve the speed of deletion.
Change-Id: I409fe11aae217afb6f790491591005c679264ed4
Our package-installs script fails when installing a package which does
not have a pkg-map but a pkg-map file exist for the element.
Change-Id: I3dab802e23bccfc916efcc1c70c6ce6c4a9ccf67
A similar change was needed in the normal ramdisk element as part
of ae928057bd to avoid running
cleanup immediately after the ramdisk build completes.
Change-Id: Ia96e2d8011b88ed96cc6727914c5a5d2dea59757
Current iso element uses 'search --file' to find the
grub root. This is a wrong approach as it may find
some other partition containing /vmlinuz. Instead modify
it to search for grub root by the label of ISO image.
Closes-Bug: 1384826
Change-Id: Id4217be3420597bed2f80a96788928259ec91582
After bootstraping a Debian image, the repository keys
are installed to verify the packages signatures, but the
Release signature file is missing. Updating the repo,
will retrieve a new InRelease file (inline signed).
Change-Id: I14f0d22cc9c72be9b07f3708270359bc8cff112d
Instead of hard-coding a list of binaries to include in the dracut
ramdisk, use the existing binary-deps.d functionality to provide a
list. This will allow other ramdisks (such as discovery) to add
the binaries they need.
Change-Id: Ib7ffa15e08db1cc45e93a8f2a5c01369772c93ff
Busybox should be installed and managed from the ramdisk element,
since that is common to all elements that need busybox. In
addition, we do not want busybox installed when building Dracut
ramdisks, so it can't be in the deploy-* elements.
Change-Id: I2656d20b466138f7f6dfcf558ba90c6909151d3c
This commit adds a new element named 'iso' to build a bootable
ISO image for the kernel/ramdisk emitted by the 'baremetal' or
'ramdisk' element.
Change-Id: I89d175a29e2d0bc64b47fe527f0d0f6875f6849a
During internal testing we are getting the following error from
merge-svc-map-files
File "/tmp/image.K2MYCphY/hooks/extra-data.d/10-merge-svc-map-files", line 54, in main
with open(data_path, 'r') as dataFile:
IOError: [Errno 21] Is a directory: '...diskimage-builder/elements/svc-map'
Somehow IMAGE_ELEMENT contains a extra white space that manifests itself
as an element without a name. It is very hard to find where this is coming from so
instead this patch makes merge-svc-map-files more robost to this situation
Change-Id: Id1500ead8a77d691408617dcdc4e095bc5775be8
The element builds dracut from source on Ubuntu because the
Ubuntu dracut package is broken and very old, so it can't be
installed properly and causes a number of other issues that
are fixed by using a newer version of Dracut.
This initial version should work in virtualized environments.
Further validation of its suitability for real baremetal
deployments will need to be done in the future, but this should
be sufficient to enable that work.
Regarding Dracut specifically, in order to limit the changes
needed in the existing scripts this element continues to use a
cut down version of the /init script that we were building for the
existing ramdisk. However, instead of running it as pid 0 it is
run as a Dracut pre-mount hook. This allows Dracut to set up all
of the hardware and system bits, while falling early enough in the
Dracut sequence to complete the deployment before Dracut would try
to boot off the hard disk.
bp tripleo-juno-dracut-ramdisks
Change-Id: I144c8993fe040169f440bd4f7a428fdbe3d745cf
This reverts commit 4bf38a829a.
This variable is pointless since we can always replace it with
/lib/systemd.
Commit I459f7514ab35082d31607968252a9005fa25de2a will fix the issue
in tripleo-image-elements.
Change-Id: I524badb6836a0d04a5f6e6a5b5d95920fd923ef6
We are autodetecting and configuring devices in dhcp-all-interfaces
so having one configured in /etc/network/interfaces by default
is redundant and slows boot down.
Change-Id: Ic4e8a0668c793d21ed2dd96908649c9a77264f67
Closes-Bug: #1239480
After being deprecated two releases ago, finally remove any reference
for the support of first-boot.d
Change-Id: I08d67404ef48cad61db3b18fb86e970abfa5d2b6
In our official image builds we are only allowed to use resources
that are "blessed" by the build system. This means that external
things like git repos and tar files are not allowed. Currently,
even in offline mode source-repositories expects those things to
be available in the cache, so we need a way to disable it entirely.
This change adds an environment variable NO_SOURCE_REPOSITORIES
that does so. It can be set in an environment.d script so elements
that might rely on a source repository will know it's not available.
The 02-lsb script in redhat-common is one such example and is
updated to handle this case.
Change-Id: I0de63bee6ad79733d6711478c707a9b41593e85f
This is the final released image; it is the same one deployed in many
cloud provers such as HP and AWS. It is also safe from all known
vulnerabilities up to its release
Change-Id: Ib8ba561662d2a98da55eb292b850dc019226dd59
Each distro had its own copy of the file, but they were all the
same and it's actually installed in redhat-common so it belongs
there.
Change-Id: Iad15f39fd28d1c4e20d30dcb2eb0ae6f2fa2b015
When uploading images to multiple clouds it is possible that the same
image will be needed in multiple formats to accomodate hypervisors
across clouds. Update disk-image-create's -t flag to take a list of
desired output image formats so that a single disk-image-create can
output all of the desired image formats.
Change-Id: If121b2342ae888855ba435aa3189f039e985b812
The centos7 images come with the base version of cloud-init already
installed.
---
$ virt-inspector CentOS-7-x86_64-GenericCloud-GA-7.0.1406_01.qcow2
...
<application>
<name>cloud-init</name>
<version>0.7.5</version>
<release>10.el7.centos.1</release>
<arch>x86_64</arch>
</application>
...
---
I think this is a hang-over from early rhel7 images that didn't have
it.
Change-Id: Idf488942222d9e6bca4d66f04f5af42e6707944d
instack runs this script on a system where epel has already been
installed, which causes the yum command to fail. Only installing
the epel-release rpm when it isn't already present addresses the
issue.
Change-Id: Ia179d7c7ed69ea5f785b5dcd16394c7663a145cc
rpm-distro element was trying to install bin programs into the
image but it doesn't provide any. Move that logic into the yum
element which provides the install-packages bin.
Change-Id: Id5339fc7ffbef6327fe41f50a3e39ab30b6d0320
disk-image-create processes a DIB_IMAGE_CACHE variable and exports it,
but there are several elements that ignore the value and wrote out
the base location themselves. Use the variable everywhere so that it
will get overridden everywhere.
Change-Id: I00fff354d6c931ad67cf3052d055f0e4604dfdc8
The way redhat-common's extract-image script was creating the base
tarball caused file capabilities to get dropped, which meant that
things like ping in RHEL 7 images was unusable for regular users.
This change adds the necessary options to the tar call to maintain
as many extended attributes as possible.
--acls and --selinux are intentionally omitted, and the selinux
xattrs are filtered out because all of those items cause issues
in our chroot environment. We restore selinux attributes at the
end of the build anyway so that shouldn't be a problem.
bz reference: https://bugzilla.redhat.com/show_bug.cgi?id=1144149
Change-Id: Ibff99ce9bde01bc5ecf95dc3a5d3e2cebe5015b9
EPEL 7 was released September 30. The beta release rpm was removed
from the repo and was replaced with the final release rpm.
Change-Id: I103a2f7abd7563869b9e39ccc1fbb3cfbd9ff6ae
In both of the changed files in this patch, the $DISTRO_NAME usage
is checking against "centos". The valid value for the centos7
element for $DISTRO_NAME is "centos7"[1].
[1] http://git.io/8IvuTw
Change-Id: I0c4a4b2ecf87c7a9283d10071f6feb494a6c716a
A sanity check that cache-url does the right thing when presented
with the appropriate curl return codes. This change brings in the
test code for scripts from tripleo-image-elements, which needs to
be factored out into a place both projects can use it.
I'm stubbing out curl so we don't have a dep on curl in our unit
tests, and because I've seen some strange behavior out of curl in
the gate that caused random failures in this test.
Change-Id: I31e6b06b45415feec7285511d07e65eb78d0d045
The openstack-selinux package contains policy updates for OpenStack.
Updates are accrued in openstack-selinux before they are merged into
the upstream selinux-policy package.
Change-Id: I7c00e5cae17489202fe7aee3e656fca27ab630ba
As some finalise steps can install packages we need to generate the
dpkg manifest after that has occurred.
Change-Id: I2177db2e64d4d9c21deeac7cf017919888a2d524
Per [1], our current root label of cloudimg-root does not work with
XFS because XFS only allows 12 character labels. This change
addresses that by allowing a custom rootfs label to be specified
in the call to disk-image-create. There should be no backwards
compatibility concerns as the default label is unchanged. Any
external elements dealing with the label would need to be updated
to support this new feature, but should continue to work as before
as long as a custom label is not specified.
[1]: https://bugzilla.redhat.com/show_bug.cgi?id=1139584
Change-Id: I596104d1a63b5dc6549e8460a1ae3da00165ef04
Adds a new svc-map element which can be used to install
services based on an in element 'svc-map' YAML config
file format.
This change is intended to decouple elements from DIB
and allow new elements to support multiple distributions
(with various service naming schemes) without having to
constantly maintain DIB's various bin/map-services files.
This patch ensures all of the YAML files are compiled into
a single file without namespaces. The YAML compilation
process occurs during image creation time and errors if
conflicting mappings are found.
Change-Id: Id11433ea342aace71a358936a7ca3151ec11d506
In preparation for enabling Dracut-based ramdisks, this change
factors out functionality that is common to both busybox and Dracut
ramdisks. Said functionality is moved to a ramdisk-base element
which is added as a dependency of the ramdisk element. ramdisk now
only contains the functionality specific to building busybox-based
ramdisks.
bp tripleo-juno-dracut-ramdisks
Change-Id: Iad2907c8be491c88727d87ed5e5a720e5beb66c3
This patch adds a new EPEL element for use with EL-based distros
in accordance with the official docs[1]. This patch also
modifies the rhel7 element to not use the hard-coded repo file.
[1] https://fedoraproject.org/wiki/EPEL
Change-Id: Ib2fa24b2d519837271a0e213a2dc5a012cc31f3c
Update to newer Centos7 images as announced at [1].
Changes included:
* update to GA image
* respect TMP_DIR for image working directory
* use suffix-match rather than prefix-match to build RAW_IMAGE name
to be more robust against weird names
* partition layout work-arounds not needed any-more, all one
partition.
Resulting image booted locally with kvm and virtualbox (after
conversion to vdi)
[1] https://www.redhat.com/archives/rdo-list/2014-August/msg00045.html
Closes-Bug: #1363146
Change-Id: Ie24033468b78587ea87188ee1b843b26895798ff
Adds binaries specified by user to chroot environment
allowing to build images on amd64,i386,armhf,arm64
architectures.
Closes-Bug: #1332458
Change-Id: If6e63a472ee85559b93b5e6b96d9c3ddcf7bcc98
Due to changes in centos7 element to use package-installs the order
of yum-repos in pre-install.d needs to be changed, to make yum repos
available before package-installs is called to install packages.
Change-Id: I47b584506465d90247f30bad515a32323e52180e
When running inside a Docker container, we cannot rely on devices in
/dev/mapper to be automagically created by udev, because we probably
don't have a udev at all. To work around this, run dmsetup mknodes
after every kpartx run.
Change-Id: If7e30579224ce54c5ed26d08974d8293c144719a
15-pip-manifests depends on the variables defined by the manifests
element, so we need to run this one earlier. I would have thought things
were alpha sorted after the numerical sort...but I just ran into this,
so apparently not.
Change-Id: Ifedf544222b5a8eb7630efda609eb6a5b9629de3
When using the yum element, we should reset the changes we've made to
/etc/yum.conf during post-install.d. Otherwise, this build time
configuration is propagated into booted instances.
Change-Id: I1eea586ca0fefe9bc0cf91fedefcbd141a536fa2
deploy-ironic element currently retrieves token over tftp and
expects BOOT_IP_ADDRESS to be set. This commit adds support for
retrieving token file from virtual media if node booted from
virtual media. Also corrects the issue for BOOT_IP_ADDRESS not set
for virtual media boot.
Change-Id: I3d5f1779b9b17842360860c7778baa01db1e1a52
Closes-Bug: #1356339
Add "-e" option to remove packages. This is needed for
elements/package-installs/bin/package-uninstalls which calls
"install-packages -e".
Change-Id: I673942f505d5278e6015324950f6e1455ba50805
Updates additional elements in diskimage-builder to use the declarative
package install support provided by the package-installs element.
package-installs does not yet support the pkg-map functionality, so
elements using pkg-map are not migrated. That support will come in the
near future.
Change-Id: I3d36adad317ba44326eabd95243d45807e2a8a16
While building images in a dual boot host,
/dev/sda is leaking into build's grub config.
It is visible in the logs that the commands
GRUB-INSTALL and GRUB-MKCONFIG probes Host OS environment.
This is avoided by setting grub_disable_os_prober
to true in /default/grub config file.
Change-Id: I7408de7b3bc8a62f8bf103f00a88a596f988353c
Closes-Bug: 1166491
Use the latest available version of the rootfs (instead of a qcow2
image) to simplify rootfs extraction.
Change-Id: Ic3a646b923738464b5217d799758b6980b2deaf2
The previous method only configured serial console for Ubuntu or
Fedora, I noticed this wasn't working when I built RedHat 7.
After reading about how grub-mkconfig works, I realized that we
shouldn't be using sed to modify grub.cfg, and set up the proper
variables in /etc/default/grub
Change-Id: I02b73dc5074cb48a716849cb8a8a9b2f054bea31
For package installs we need to be able to fix up permissions in
/var/log at install time, and if we delete all of the files then
those permission fixes get lost. To deal with that, we can just
empty the files instead of deleting them.
Change-Id: I70abb354e4dc726ec7a176694c7c6e9455d89d08
This is more than a bit hard to test, requiring as it does an actual
iLO BMC, so sadly I have no tests :(.
HP Hardware really wants to be running latest firmware, and its
commonly agreed that one place where it can be sanely applied is in
the deploy environment, so this is my long threatened implementation
of that.
Change-Id: I3117a250d0d0eb8ee33eb4b15c837485a5cbf476
The pypi-mirror tool is no longer supported by the infra team, or
reccomended for installs, and is known to have various bugs that will
not be fixed.
Remove mentions of it from the docs and point people at devpi-server
instead.
Change-Id: Ieedb8bf9bee2f5932edac6b9747e645d0f4eb08c
Now that dib-run-parts has been moved to the dib-utils project, we
need to update diskimage-builder to use it instead of the version
directly in diskimage-builder.
This change removes the old copy of the dib-run-parts script in
the element, adds dib-utils as a dependency of diskimage-builder,
and updates the uses of dib-run-parts to correctly handle the fact
that it is now external to the project.
Requires I0be1f876d0e4a7d38e0d5c6010a552a8ebb158a4
Change-Id: Ia0a0df7784a14c49b5c47ac0b03e6c2602c84b3b
There are a bunch of optional env vars references in the rhsm
registration script, but they weren't wrapped to be set -u safe so
they cause build failures if any aren't set.
Change-Id: I18326b618f0920efa4dbd805611c6ee66d33ebb0
This reverts commit ac73660c40.
This was a backwards incompatible change - it broke the stable tripleo-heat-templates job.
Change-Id: Ideffca203db7b860b9f9d96c1d9f73e046519ec7
The existing support for tar files in source-repositories saves
only the contents within subdirectories contained in the archive.
This change makes the selection of contents within the tarball user-
definable based on the REPOREF specified (or overridden in the env).
A REPOREF of '*' (the current default, but deprecated) will select
the contents of subdirectories within the archive, while '.' will
select the entire contents of the archive.
For reference:
http://lists.openstack.org/pipermail/openstack-dev/2014-August/043197.htmlhttp://lists.openstack.org/pipermail/openstack-dev/2014-August/043249.html
Change-Id: I45db42ce66bf1d63d6ab5730090bf458b1b37ce9
An empty package list can be provided in a pkg_map file for those
cases were there is no need to install the package.
Change-Id: I0df8c6848ec4ac9e0f90790f14e8eb5399650339
Updates the fedora element to use the declarative package install
support provided by the package-installs element.
Change-Id: Ib3eb1936aa5c4efc350828e004794b0a8bd6c6c4
Packages are often also installed in both the pre-install.d and
post-install.d phases. This patch expands the package-installs element
to support declarative package support for these phases in addition to
the existing support for install.d. The actual install/uninstall logic
is moved to common scripts under bin/ so that it can be reused across
the different phases.
Change-Id: Id51d0bbad232737fc8b5ffaf016dec50cd5b66c9
I don't actually think there is a way that disable_interface
would get called on Fedora... because if config_exists
it takes a different path. Furthermore we really don't
want to mess w/ configured interfaces in dhcp-all-interfaces
because that could be side effecty (and is arguably the
job os os-net-config anyways).
This function already did nothing on Debian so removing
shouldn't hurt anything.
Change-Id: Ic53bbab98aa03d487efd290ae8e076045781b5b1
Relabel the filesystem during image builds if SELinux is supported
in the kernel of the build machine and userspace tools are available.
Otherwise touch /.autorelabel to schedule a relabel the first time
the image boots. We relabel when possible because it decreases first
boot time.
Change-Id: I0bec885d6e5d4f4e1106f3bd2a90ba5f86395b07
Partial-Bug: 1347845
Skip the contents of /tmp/ when creating tarballs with the results of
debootstrap, as that directory contains just ccache cache (and in
general temporary files).
Small (positive) side effect is that deboostrap tarballs gets slightly
smaller, something like 2-3 MB less.
Change-Id: Ib4adf3dc908f02deed408bf9188f032767eeb2bb
Just remove globally /lost+found after the root and install phases, so
distribution elements don't need to do that by themselves.
Change-Id: Ic783e613bd8794aefd3f40c9a7c308d14cd04b8d
Grub installation happens in finalize.d so cleanup should be done after this.
This reapplies I6322b8b529e31fd1b7251dd9e07cc85f442f7e81 after the revert,
but working.
Change-Id: Ie1873e64d407552da37a8dbedc13c3adbf79c085
Some extlinux packages install mbr.bin under /usr/lib/extlinux or
/usr/lib/EXTLINUX so tese directories need to be checked as well.
Also, there are packages that create a /boot/extlinux directory
which needs to be taken into account. Finally, commit
bccffc8bfd dropped the /boot prefix
from the kernel and initrd references in the ext/syslinux config
file which is simply a bug that needs fixing.
Change-Id: Idb071c9b18ff557b0f0f76d0d754536f2deca904
Closes-Bug: 1335042
This mapping is not needed anymore because mariadb-rpm element
(renamed from mariadb-rdo) uses pkg-map.
Relies on: I90e7ca4803516b86179b0f6639e307a60297960b
Change-Id: I19fb44ee6008c6c57dd331a780eec3234d46b15c
UBoot needs the kernel and ramdisk to be post processed
using mkimage utility. This element helps user do it as
part of the DIB process.
This element needs u-boot-tools to be installed.
The load address and entry point for UBoot kernel can
be specified as shown in the example below.
Example:
export UBOOT_KERNEL_ADDR=0x80000
export UBOOT_KERNEL_EP=0x80000
Change-Id: I0e1039bf57d1ef11a3f9831d82e24b1ec2136c13
This calls chroot as a non-root user, which will always fail with
EPERM.
This reverts commit ab2d1a31f2.
Change-Id: Ie674fef694ad66e1ebc22083dec2a0bc34371e7b
Includes "Don't match editor backup files in environment" and "Order
execution of environment.d scripts". These had to be squashed because
the first change alone changes the order env.d scripts are sourced in.
The current glob match for environment files can source editor backup
files (foo.bash~) which will override the real changes you have made.
Other parts use the regex to avoid matching such files, so do
the same for environment file matching. Note this has to match "."
unlike the other regex, as most env files are "foo.bash"
Also sort the files before sourcing them to ensure a reliable order.
This change should be in line with current expectations, given the
convention is to numerically prefix scripts in this directory.
Update of: I934486b3ff5884063d29c6d9b66fd9b11140464c
Subsumes: Icc509f695d7a15a8026d8c7e463f06acf65499d7
Change-Id: Ibfb562c5970b40598fc95da1e8d4beb9d51d7612
This change adds support in ramdisk element for recognising
boot from virtual media cdrom and read the parameters from
the configuration file in virtual media floppy.
Change-Id: I28ca888b4ead4905f7141b38ed4b9a3614d00d26
Closes-Bug: #1321564
This patch updates the RHEL7 element to work
properly now that it has changed from beta to
release status. It includes a repo update to
locate os-config rpms not in epel yet and an
update to the latest cloud image name.
Change-Id: I05607d62193c8f8fb1c1bece9872d456b19c5a08
There are some situations where the list of packages to install
in a image is blank (packages blacklisted).
Change-Id: I315f97fe619c25b36cf47ed1b7a65936b753312e
After running through pkg-map we could have no packages to install,
if so, don't attempt to run a malformed command.
Change-Id: Ia8e0aed62bcf814bf85c86b54ff0837da49ae7dd
We need to be able to do install.d like things for ramdisks
themselves, but install.d runs outside the ramdisk context - and its
likely to break peoples brains if we mangle the two together - so this
adds a new hook point, ramdisk-install, specifically for installing
things into the ramdisk.
Change-Id: I37d1660309cda6e28bd0b316b08f61db4e080613
Initial support for a centos7 image.
This is separate to rhel7 because the major differences are things
like repo and image locations, which are always going to be different.
We should merge any real changes into the redhat-common layers.
Apart from the added support files in centos7/*, the other change is
mostly modifications to redhat-common's extract-image to handle
different partition layouts of the centos7 image.
Change-Id: I943abe5ff0a803f36eda266a79af0d9220edcae7
The default value points to old image name
which results in 404 error. So updating the
value to point to correct name.
Change-Id: Ia66f0cf4f4167926892a0786467412d277ebffc3
This change adds support for retrieving the IP
through DHCP if 'ip' was not provided as a kernel
command-line argument by pxelinux. This is used
when the kernel/ramdisk is booted by virtual media.
Change-Id: I1097ce5b56ad40f2d6dc3181681d54f924ec7145
Closes-Bug: #1321563
Problems were seen when building images in parallel with
git clones and fetches interfering with each other.
Stop it.
Co-Authored-By: Michael Kerrin <michael.kerrin@hp.com>
Change-Id: Iaa48f259755d8b22327459a5c6d224a342909aee
The last patch to do this only handled the case of SHA256SUM being
stale, but the image is more likely to be stale in the default
configuration as the hash file is downloaded over HTTPS.
Change-Id: I6531fa684e560cad48c3696394d48a600680c875
Closes-Bug: #1336067
When the call to pkg-map fails, it prints the error to stdout. However,
this output is lost when pkg-map is executed in a subshell, so the
actual error is never seen. This change adds an explicit echo so the
error is shown.
Change-Id: Id6f4fae6acadfe2839b408fb2dd11fb65d65df6e
Optimized the creation of directories by using the Brace expansion mechanism.
And corrected the dirname resolution to follow correct convention.
Change-Id: I048c04385d2706c4e38f8548555a59b0437e1fcd
This reverts commit 32eda4b92f.
I noticed today that environment.d files no longer seem to get sourced
by DIB. Reverting this commit fixes it.
Change-Id: I08a8feab541901c8fd0a803628f5aeb6c0eec598
Closes-bug: #1339116
Some users on corp networks are finding that cloud images appear in
their proxies before SHA256SUMS files.
We now try to force any to upstream proxies to update their copy and
retry the checksum, rather than immediately failing.
We also now add proper argument parsing to cache-url, and associated
help functionality, since we have now grown our first argument.
Change-Id: I44d44b62db8d1df990606fdf087ec1b837f491f6
Closes-Bug: #1336067
There are some situations where the list of packages to install
in a image is blank (packages blacklisted) on opensuse based
distributions.
Change-Id: Ib720473fa63671ed974d41a86fe10a9b10720f5d
The current glob match for environment files can source editor backup
files (foo.bash~) which will override the real changes you have made.
Other parts matche use the regex to avoid matching such files, so do
the same for environment file matching. Note this has to match "."
unlike the other regex, as most env files are "foo.bash"
Change-Id: I934486b3ff5884063d29c6d9b66fd9b11140464c
Rename rhel 10-yum-blacklist to 10-rhel-blacklist to
avoid future name conflict with a yum element blacklist.
Change-Id: Ic2136a06e1ec8f19908ada978782733d5fa7cacc
Force LC_ALL to C to allow printf to work independently
from the locale. Gives invalid number error if run in non-english
locale.
Change-Id: Ia68853505485fefbf0890313456e7edb6097666b
Closes-Bug: #1335932
This patch updates the openSuse element to work with the new
base image file format. It should be noted that the base image
file name has changed several times while updating this element,
and and may need to be set manually via the "BASE_IMAGE_NAME"
env var.
Change-Id: I4dac8bf9a4bf76a00d4a04cbf063fd245b11f3d6
The $DISTRO_NAME var is now set in all of the OS elements
in environment.d. This patch removes the call to
lsb_release and instead uses the $DISTRO_NAME variable.
Change-Id: I7088eb88b6a3611fef5a21a6b62975876549465f
The current "redhat" os family omits RHEL7. The rhel7 element has the
corresponding $DISTRO_NAME set in environment.d. This patch adds rhel7
so a pkg-map json file using "redhat" for the os family will work the
same as rhel, centos and fedora.
Change-Id: If6b4cbba618167669a499e6121f234942ca9367a
Several elements were using almost similar code to
get the current kernel and initrd inside an image.
After factoring out this code into a common element,
modify the elements to make use of it.
Change-Id: Ib547cd96b2b354b1c97342cacf5f0d0a3f70a3da
It may be desirable to specify file://tmp/pypi as one of the list
of mirrors specified by PYPI_MIRROR_URL, so the local pypi mirror
should be mounted as long as the directory exists.
Even though the path is mounted, it is only used by pip if there is
no specified PYPI_MIRROR_URL, or if one PYPI_MIRROR_URL entry
specifies file://tmp/pypi.
The pypi element previously assumed that a local mirror would be
a complete offline mirror. This change allows for a mixture of
local mirror plus remote mirrors. This means that the local
mirror could (for example) contain a few locally built pip packages
from arbitrary git checkouts for gate testing of those projects.
In this scenario, most packages would be downloaded from the
configured remote mirrors.
This change is required for synchronous gating on the os-*-config
tools.
Change-Id: I0f6d153c06993ffd0d90bd8ca1717462e8b6b541
Encapsulate the new select-boot-kernel-initrd common function
into an element so other elements can make use of it.
Change-Id: Ie587bd5dae1afebfd5646190dfa951a7949938cd
Debian based distros do not enable the serial console by default
in grub.cfg, instead sending all boot messages to the display
Change-Id: I0e80859198e77862ab0301ab27ebe11702fba09d
Ensure cache mount directory exists before its used. The zypper element
would error when attempting to mount the cache directory because the
mount point did not exist. This patch corrects that.
Change-Id: Iaa3c2a0254b12bd847643a61a99f5a234097fd21
Scripts in pre-install.d run as root so there is no need to sudo commands.
This patch also helps avoid an error when sudo is not installed in the
default image.
Change-Id: Iab20edfb161189f8c4e0cfa7d6946f63163d6413
The DIB_CLOUD_IMAGES variable in ubuntu's root.d is already used
everywhere with a /, so we can safely drop it from the default
value.
Change-Id: I39dbd3f4004052fcccb4131dc838759f4c82312a
With this change package name to distro mappings used
within the base element are now stored in the top
level pkg-map file.
Additionally, all bin/install-packages commands are updated
to use the -m option so that the base element pkg-map
namespace is used by default.
Change-Id: I3bdbf987c8525f9ef67ca0c263651d6613f29ef0
Updates the opensuse element's bin/install-packages script
so that if supports using pkg-map instead of map-packages
for package mapping. To make use of the new change
simply add the -m <element name> to allow install-packages
to know which element namespace to use when installing packages.
Use of the new -m option is off by default.
As part of this change we also updated install-packages
to use getopt for in script argument parsing.
Change-Id: I56da8adf6c445c50c7642e221c6c11ba59330404
Updates the dpkg element's bin/install-packages script
so that if supports using pkg-map for package mapping.
To make use of the new change simply add the -m <element name>
to allow install-packages to know which element namespace to use
when installing packages.
Use of the new -m option is off by default.
As part of this change we also updated install-packages
to use getopt for in script argument parsing.
Change-Id: Idfc40f2d75828a0f09d227f0332ccef8f0183efc
export $SYSTEMD_SYSTEM_UNIT_DIR to know where .service files should be
moved.
So far those files are moved directly in /usr/lib/systemd/system whereas
Debian use /lib/systemd/system.
We load the value from the systemd pkg-config file.
The patch don't use pkg-config directly for three reasons:
- environment.d files are run before install.d and the other similar
targets, making hard to install an additional dependency
- the .pc file can easily be parsed using awk
- pkg-config package name is not standard across the different
supported distributions
$SYSTEMD_SYSTEM_UNIT_DIR default value is /lib because, as pointed by James
Slagle, /lib is actually a symlink to /usr/lib/ on Fedora and will work
for Debian and Fedora.
See: https://bugs.debian.org/719634
Change-Id: I413a92284e6a79e7fcdde99c5138bc3ce8e85e80
The 'None' Datasource does not exist in precise 12.04 (which uses
cloud-init 0.6.3), so conditionally ensure that we are not including
this in the datasource_list in case we're building a precise image.
Partial-bug: 1329068
Change-Id: I6efb91e17bf896bbf7d67c31c4eb5098d5d61a71
We use an element remove-serial-console in image elements.
Renaming this element to match. Also renaming allows us to use
the serial console in devtest runs.
See - https://review.openstack.org/#/c/86272/
Change-Id: I8f1138f58d0046ccdeefa3decc45c36d95c6bf4b
diskimage-builder/elements/base/cleanup.d/99-tidy-logs added
to tidy up (remove) initial logs files on disk images.
Makes for slightly smaller images, and easier times tracing post
boot issues.
Change-Id: Iee98b5d818e080bcd9635482bc29349a71938087
source-directory ifupdown directive has been introduced in version
0.7.44. Wheezy comes with version 0.7.8.
Without this change, the eth0 interface will never get an IP address on
Wheezy.
Change-Id: If40ed3b82ca78280190b66c06a0a77bb71270d7d
The script to find best kernel from image (used by vm
and baremetal element) is duplicated and is not in sync
with each other. Moving the code to img-functions as a
function will reduce duplicated code and make it reusable
in future.
Since img-functions is not accessible in chroot env,
kernel selection is being moved from finalise.d to
cleanup.d in the vm element.
Change-Id: I8fbccc13a2c61a5191ef9ea5d2a8302a3e43b000
Updates the 51-install-tgt and 52-install-busybox files
in both the deploy-ironic and deploy-baremetal elements
so that they have unique names.
While an end user would never use these elements at the same time we
should always use unique names for things per DIB conventions.
Change-Id: I8926870e45849341c10b2d479ddee45f9b625e2b
While an end user would never use these elements at the same time we
should always use unique names for things per DIB conventions.
Change-Id: I53b10522183e8566c62922b91878e5cf767fe2c6
Both the rpm-distro and redhat-common elements had the
same exact 00-usr-local-bin-secure-path. This commit
deletes the one in redhat-common and leaves the one
in rpm-distro (which is also required by the same
elements).
Change-Id: Ie9ef29d268b3737a6741fce016ef335db6651b59
While an end user would never use both redhat-common and ubuntu
elements at the same time we should always use unique names
for things per DIB conventions.
Change-Id: I2cabc583a1fd41d4fe7fbf8cf93127d49e26aff4
Updates the yum element's bin/install-packages script
so that if supports using pkg-map instead of map-packages
for package mapping. To make use of the new change
simply add the -m <element name> to allow install-packages
to know which element namespace to use when installing packages.
Use of the new -m option is off by default.
As part of this change we also updated install-packages
to use getopt for in script argument parsing.
Change-Id: I19240e74b69859f7faf9cd80440633234a677d63
With this patch, /var/cache/apt/archives directory content is preserved.
The directory is actually a bind mount of the
~/.cache/image-create/apt/$DISTRO_NAME directory, much like what we do
for ccache.
You can use DIB_APT_LOCAL_CACHE=0 to disable this behavior.
This trivial change improve performance A LOT (>30%), even if a local
HTTP proxy because:
- there is no need to copy again and again the same files
- we avoid network latency
The patch has been tested with Debian and Ubuntu with every elements
from the tripleo-image-elements repository, the final size of the cache
directory is about 700MB per distribution subdirectory.
Change-Id: I4fab499493f734c7c546d4d23b1a98f0e7523a39
OVS service is called:
- openvswitch-switch on Debian/Ubuntu
- openvswitch on RHEL/Fedora
This changes is needed to get the neutron element to work
on Debian/Ubuntu with systemd:
I6e3df30dc3a6918f3a949a7dac47289ede5c3d1f
Change-Id: I2748a9db7f8ee456698187a9646bc7cda2256fe7
This change adjusts the "inline" python function used to profile
run-parts duration to make it run successfully on both py2 and py3
Change-Id: Ib5287a56b8e2b3e882dca489192f01d9f01cd8ba
Now that issues associated with this bump have been addressed
elsewhere, reinstate trusty as the default DIB_RELEASE for
the ubuntu element. Also adds a note about memory requirements
to the ramdisk element.
Change-Id: Ia89c83ba0ee4ad3bd89b833ba0db08135eac63ed
Default to only having cloud-init query Ec2 on first boot for Ubuntu,
until cloud-init has been SRU'd to fix the CloudSigma data source issue
that causes Trusty boots to hang.
Change-Id: Icb3734d5ae78f4a0a6c0fae1af4a2ce3c809308c
Partial-bug: #1316475
This patch removes a couple of lines of redundant code. In Python,
the get method on a dictionary defaults the return value to None,
so the method never raises a key error.
https://docs.python.org/2/library/stdtypes.html#typesmapping
Change-Id: I180877f9be23d373cd63771bb3682d6587ec6fac
There is a substitution of suffix in rhel element, like
rhel-guest-image-6.5-20140121.0.x86_64.qcow2 to
rhel-guest-image-6.5-20140121.0.x86_64.raw
The convert is correct but the substitution of the suffix is wrong.
${PARAMETER#PATTERN} will match the string from the beginning and generate rhel-guest-image-6.5-20140121.0.x86_64.qcow2.raw
We should use ${PARAMETER%PATTERN} instead, which is from the end.
Change-Id: Ic45a3f800058ea9e5d746ff543c068a54632407d
This moves cloud-init data source configuration to a general purpose
cloud-init-datasources element that can be used to explicitly configure
the list of cloud-init sources that will be queried on first boot.
cloud-init-nocloud now depends on this new element to configure the
datasource_list while continuing to prep the image for a nocloud first boot.
Change-Id: Ibcc3b86d6ca567a23f89b7a1a36bc713e444ef68
Closes-bug: #1316475
Updates the various operating system elements so that we
set the DISTRO_NAME variable for each distro.
This env var is used by bin/pkg-map to set the default
distribution name for package name mappings.
Change-Id: Ib4b05eb7191dd50d25799a0bac51fd15c01b74cb
Adds a new pkg-map element which can be used to install
packages based on an in element 'pkg-map' JSON config
file format.
As part of this change we expose DIB's IMAGE_ELEMENT variable
so that we can have access to the element names which are being
installed in a clean manner.
This change is intended to decouple elements from DIB
and allow new elements to support multiple distributions
(with various package naming schemes) without having to
constantly maintain DIB's various bin/map-packages files.
Change-Id: Ic0a061995e2ae708c95a535cba6237bff58f7d93
A few scripts were added without set -o pipefail since the original
change to add that everywhere. This will get the dib-lint check
passing again.
Change-Id: I96bef45cc10ff9bbcf2c4f1b796b8cd188e10485
Add the ability to supply a gerrit ref in DIB_REPOREF_* and
have that reference fetched from the remote and checked out for
building within the image.
Closes-Bug: #1314021
Change-Id: I5e5742c4cbff98e14121c50dde5e512f192b5415
Co-Authored-By: Robert Collins <rbtcollins@hp.com>
Using -n for bash arrays was a little bit bad, and also resulted in
errors when running under set -u. Wean the yum element off the array
and switch to a straight string.
Change-Id: Ifd61fce7dadd5820022e9b2ab42020ba0cb71ce6
When using custom-built kernels, their filenames may not necessarily
follow the standard naming conventions for the stock systems in question.
This patch permits the specification of an alternative pattern to use
when looking for the correct kernel to construct the PXE images from.
Example:
export DIB_BAREMETAL_KERNEL_PATTERN="kernel*jang"
export DIB_BAREMETAL_INITRD_PATTERN="initrd*jang"
Change-Id: I86e5254051addd5e89dd4e363e9bba117e65353d
Add support for supplying a custom keyring and debootstrap script
using two new environment variables:
* DIB_DEBIAN_KEYRING - Path to a gpg keyring.
* DIB_DEBIAN_DEBOOTSTRAP_SCRIPT - Path to a alternative debootstrap
script.
Change-Id: I42e8832b435b8a77b0681b5bc9d9332bbe860cd5
Although set -u allows empty WHITELIST=() list to be set, you can't test
-n "$WHITELIST". Looks like the intention of the commit that caused
this issue (Change-ID Iad2d490c86dceab148ea9ab08f457c49a5d5352e) is to
set a policy to prevent future use of bugs due to unbound variables.
Thanks StevenK for pairing with me and helping me hone my bash skills.
Change-Id: I2349c990ba53b0aaecd5119812582c7c848f1e4e
Closes-Bug: #1319987
If the kernel is restricted read (as a security measure) we may not be
able to read it without chmodding it.
Change-Id: Ib577705c27d8c351288334de03a7848cf49f2de9
If 'DIB_RHSM_USER' isn't set, the image build with rhel
element fails because of check 'set -u'. So, we should export
'DIB_RHSM_USER' in script to avoid error during build
Change-Id: Ic63a20e3d91a25bbe804440a5919b035489c60a3
Closes-bug: #1318717
When the cache tarball gets fail the output doesn't indicate
what url is failing. Adding '-x' displays the urls attempted.
Change-Id: I71b2dbfd712e72c591410ca9b68edc76d493ad6e
As with the previous similar changes, this is intended to catch
problems as they happen instead of ignoring them and continuing on
to potentially fail later. Setting this on all existing scripts
will allow us to enforce use via Jenkins.
Change-Id: Iad2d490c86dceab148ea9ab08f457c49a5d5352e
Updates the fedora element so that DIB_DISTRIBUTION_MIRROR can
be used to configure a custom Yum mirror on Fedora. This
implementation replaces the baseurl in each of the default
Fedora Yum .repo files so that a custom mirror URL/path
can be supplied. The URL should point to the directory
where the updates and release directories exist. Example:
http://download.fedoraproject.org/pub/fedora/linux
As part of this change we also remove any existing
metalink settings in the .repo files to cover the case
where an end user runs their own createrepo command
to create the mirror... which means your metadata won't match that
of the normal Fedora mirrors and your baseurl won't get used.
Change-Id: I1a49a2941b1cc489e91a72b87430393cd32e865d
DIB's map-services is currently used in TIE's os-svc-config
binaries to support service name lookups. Many of the systemd
specific functions require bin/map-services to exist.
This change adds bin/map-services files that are noops
to both the debian and ubuntu elements so that as those
distros move towards using systemd they can make use
of the functions we already have in place.
Change-Id: If8d61f3858b11de86c3292e840d033e5e3cecedb
If scripts are not set -e then errors can be ignored, causing more
confusing failures later.
Also adds an exclusion comment to the ramdisk init script since we
don't want that to exit on failure.
Change-Id: Idf43993bd10b1ef16c1d3b0d9df8d0ad94c46458
Adds a new element, package-installs, that provides an interface for
declarative package installs and uninstalls. Packages to install can be
added to an install.d/package-installs-<element-name> file. The set of
packages listed across such files are installed in a single transaction
at the beginning of install.d.
Prefacing the package name with a "-" indicates that the package should
be uninstalled at the end of the install.d phase. Again, the full set of
uninstalls are done in a single transaction.
An element providing a package-installs file should add package-installs
to its element-deps file.
Change-Id: I5b540388eff1079c8dee933b869463371481152b
This commit fixes the if/else block around Debian stable/unstable which
was badly merged during the last rebase.
Change-Id: Ia2eb806da3d7c8d28afffb026f35600c7125d8d7
This makes it easier to work with temporary files - less traps
scattered around higher layer code.
Change-Id: I2fdd93115a7b0d289c2e28f8c133d4059de75b87
This patch adds a debian-systemd element to get systemd support with
Debian.
A backport of systemd is used on Debian Wheezy.
Change-Id: I095c81b2c32844fccf940c97b79054923c25b8c2
Upstart cannot be installed by debootstrap on Wheezy because of a
conflict with sysvinit. sysvinit is flagged a being “essential” and
apt-get will refuse to remove it.
See: https://bugs.debian.org/668001
This patch uses another strategy. We install a standard sysvinit
Debian chroot with debootstrap and during a second step, we
replace sysvinit with the wanted init system.
Change-Id: I081c81b2c32874fccf940c97b79054923c25b8c2
Cloud images expect the primary interface to run dhclient in order
to come up and acquire an IP address. Although we have technology
to manage without this for the undercloud and so on, the seed
still relies on this machinery in order to bring up its first
interface.
Change-Id: I079a679779de760ee9ca6f93cbb22e69a65e03af
Using set -e in all of our scripts will prevent some subtle bugs
from slipping in, and will allow us to enforce use of set -e with
tooling.
This change also adds -u and set -o pipefail in the less complex
scripts where it is unlikely to cause problems. A follow-up change
will enable those options in the complex scripts so that if it
breaks something it can be reverted easily.
Change-Id: I0ad358ccb98da7277a0ee2e9ce8fda98438675eb
In the mailing list discussion, everyone seemed to agree that we
should just be explicit that these are bash scripts since that's
where we're testing them and there's no good way to ensure they
work on any other shells right now.
Change-Id: I86c41d2cddf6e91e7deeb4c2ab51635c80a1ce0c
The phrase is no longer needed as of August 23, 2000 with Nicaragua's
joining of the Berne Convention.
Additionally, in at least one instance,
elements/cache-url/bin/cache-url, its existence in the file between
Copyright lines is just weird and feels misleading, even though it is
not.
Remove all of the lines, because sanity.
Change-Id: I24fd76c2b4f66b8036010b5079db39ead729abee
Trusty ramdisks do not boot, failing to exec init. This reverts
the default DIB_RELEASE back to Saucy until Trusty ramdisks have
been properly tested.
Change-Id: I5ac81822b78805275268cecc021a74a62c22ef58
Nodepool needs to be able to install kernel headers, which means we
need a mapping for redhat systems here.
Change-Id: Ic83d642b5ebe85b042cf7b23b295be74bbe185fa
Provide package name mappings for openjdk-7-jre-headless:
RHEL/Fedora: java-1.7.0-openjdk-headless
SUSE: java-1_7_0-openjdk-headless
See https://review.openstack.org/#/c/86314
Change-Id: I3a351d0f9854f6f320ba145a71ffc66fd02c231c
Unlike the redhat-common and opensuse map-packages maps, the RHEL one
appears to be unsorted. Fix that.
Change-Id: I75c5d2694525731660c2a3b5b58ee696c61923ba
This patch adds support for sysv init to the dhcp-all-interfaces element.
Specifically, it adds a sysv init script and the relevant install/config steps.
Tested with Debian jessie/testing.
Change-Id: I4ae1d5365bafda188cb65ea1fb72d8ffe2408910
I3166951c6fbb2faec53ffc339edd2fd0c3512300 recently landed without two
fixes that I suggested, namely using rm -f rather than testing for
file existance, and a comment fix.
Change-Id: I68e187e20802f3482d4c524a6c435fec7526178e
This change adds extra tests to the
elements/manifests/cleanup.d/01-copy-manifests-dir script to prevent it
from exiting with an error due to non-existant files.
The premature exit condition only seems to happen when an image is being
created without including the "base" element.
Changes
* adding file detection tests for dib_arguments and dib_environment
files
Closes-Bug: #1308224
Change-Id: Iaa8bafb6765241408b9f02d4896913d15f2f401d
This is dependent upon change in tripleo-incubator
I1ff4bb98c99dfe87ccc4fb19767b93e27707d3a7 and concludes the
renaming of deploy to deploy-baremetal
The rename was performed so that each element had a more descriptive
name, and so that each element could accurately set an element-provides
of "deploy", given that the elements enable tripleo deploys via the
ramdisk image.
Change-Id: Ic2ca5f95b8895fa0d6d7314cab9de30a7204541c
Use "deploy" to denote that an element provides the deploy
capability for a ramdisk for tripleo installation purposes.
This will be a 3-part change to enable renaming deploy to
deploy-baremetal so that the generic "deploy" capability can
be used for the provides file, as a dependant change will have to
be made in tripleo-incubator.
The tripleo-incubator change is
I1ff4bb98c99dfe87ccc4fb19767b93e27707d3a7 and that swaps to using
deploy-baremetal in place of deploy for ramdisk creation when using
baremetal.
Change-Id: Ibb4026e8fc8ba6378061461c4796a91ab2fa991f
/etc/lsb-release doesn't always exist in cloud images and doesn't
serve any significant purpose in this element so removing the
dependency entirely.
Change-Id: I4d972074e6e10fea09a875cbc4ed4e60248d46d9
DIB_OFFLINE has wide-ranging effect. This patch adds a tunable that
only turns on the tarball-caching behaviour specifically for the
debian element.
Change-Id: Idd646d7909df6907afc0eeeec1129c3f1a1f92bc
Moves the code that removes default cloud interfaces
into the dhcp-all-interfaces element. Having it live in
stable-interface-names won't work right now because we
need this for virtualized testing.
Change-Id: I3166951c6fbb2faec53ffc339edd2fd0c3512300
“debian” element now source the ${TARGET_ROOT}/.extra_settings file. We
can use this file to adjust its behavior and specifiy what init system
should be used.
Change-Id: Id57ce879341184a57851d2578cf70978f409a48e
Fixes problems found by set -eu and pipefail, including:
-Many unset variables
-Commands that can fail under normal circumstances, which breaks
with set -e. This change swallows those expected errors to allow
our existing error code to handle them.
-The dkms element was not finding Fedora kernel versions correctly.
This may be an issue for other distros too, but since Fedora was
working fine without this functionality I only changed it to print
a warning message rather than failing the build when it happens.
-The ramdisk init script will not be set -eu because if it fails
the result is a kernel panic, which can be tricky to debug.
However, in testing with set -e a few failing commands were found
and have been fixed in this patch.
Change-Id: I44cf98dfc80cfcaec54b88cc83be80a3dbf2cec3
Mariadb package in RDO repository is mariadb-galera-server, but
this name is mapped to MariaDB-Galera-server because of
mariadb installed from mariadb.org.
To avoid mapping conflicts mariadb-rdo uses virtual package name
mariadb-rdo-galera-server which is mapped to mariadb-galera-server.
Change-Id: Idf77d91876baeb81d89eb688808b892ece2bf19a
This was supposed to have been moved to the redhat-common element,
and having it here too is both confusing and may break builds
depending on which version gets used.
Change-Id: Icae5cc633e9e49a9ee63bd9dfc94657c6795c6f1
Use "operating-system" to denote that an element provides that to the
image being created. This can then be used to specify an abstract
dependency in other elements to assist in build-time image verification.
Change-Id: Ic125803da65e0f8f8c20ef90b08815f4f7d09762
* Create a standard element to copy manifests out of the image and
into the build area.
* Ensure all current manifests are copied into a standard manifests
directory
Change-Id: I37eff5a13a14564e1adc33eb4f0144d571267617
The version of depmod in busybox does not work if two versions of
the same kernel version are available, as search paths are not
honoured correctly. However, we don't need to actually call
depmod as it's done during image building anyway.
Change-Id: Idd3cd5854e7c86e7ca1f2b0e50758d7db79ab6e7
Co-Author: matthew.gilliard@hp.com
Closes-bug: #1302856
In the bash script "99-override-default-apt-conf" 'set -u'
is being used to check for uninitialised variables.
This resulted in generic 'unbound variable' messages rather
than the intended error messages.
Tweaked the check for DIB_APT_CONF to work if the variable is unbound;
so that we get the intended error message rather than the `unbound
variable` message.
Change-Id: Ib8e287060f32312ab80dd7f44e2792ecca48edbb
Adds an environment variable DIB_ADD_APT_KEYS pointing to a folder of
apt repo GPG keys. Each key will be verified and installed with apt-key
to the apt keyring.
Change-Id: I4b15347a76aa3241e741931bb94f17598641ae42
The ${TARGET_ROOT} chroot is owned by the root user.
Without this change, the build will fail for a standard user
with a “Permission denied” error.
Change-Id: I6eb87d3a14292da5620bdfd623ea7ef846fe2af6
There is a known issue in legacy grub. When using splashimage with
serial console, Legacy grub wont start properly. This commit is to
ensure that when serial console is used, legacy grub should not
contain splashimage. It also adds serial support to legacy grub
configuration file.
Change-Id: I2007916998dfe7c66ef51bf8c57c1698dc0fcb75
When the repository references are sha1s the fetch command used will
not work. This will ensure that all of the objects are still fetched,
and all of the local cache references for branches and tags will be
updated rather than just the specified reference in use.
Change-Id: Iad2554b3087a5da37dac6e9f6a72432d49fce83d
Closes-Bug: #1301435
--target has been introduced in grub2. This patch ensure we use
the minimal version before adding the --target XXX flag.
Debian Wheezy and Precise share the same limitation regarding the
root device.
Change-Id: I5b3ad42b9fb536d13fb65d84339bc15bc23d99a3
The grub install scripts on Fedora have hardcoded checks for
/sys/firmware/efi and if the directory exists, it uses efi
specific instruction like initrdefi, linuxefi etc. vm element
should fix it once the configuration is generated.
Closes-bug: #1231946
Change-Id: I888304cb9167b8e074b04ca6c5b2f9143b70d37d
This was calling it for all interfaces previously, making the fixes
we'd put in place be ineffective.
Change-Id: I16bf81225a942e3b19a7e745d949e6ddea2fd50e
When high VM churn is encountered dhcp-all-interfaces got tangled up
and leaked instances until upstart run out of filedescriptors.
This happened because we were locking on every invocation, and the
lock logic was disabling the single-interface code - so we always
probed every interface every time - and this was serialized across
every instance of dhcp-all-interfaces.
Change-Id: I4ef1fb83d978cc99d4cb9cc2666bde302c6db7d1
To create an auditable log of packages installed in an image use
dpkg-query to create a json data file with the package names, version
and install status.
Change-Id: I59018221edcb944a876ad47b402538c63c426bc7
The cloud-init package on Debian Linux overwrites the system
hostname to "(None)" unless a hostname is specified in one
of the /etc/cloud/cloud.cfg.d/* files. This change applies
a default hostname of "debian" using cloud-init.
Change-Id: I9b411df44cfa05f899e708900f95719c0bcd6267
Corrects an issue in the config_exists function that could
cause duplicate interfaces to be configured on Ubuntu.
Previously we used 'return ifquery' directly which caused
a silent 'numberic argument required' error to go unnoticed.
This would also return 1 meaning a new interface would get
configured.
The new logic should handle things properly.
Change-Id: I625225e15113d7e184e3bcb5054df1616dec008a
Closes-bug: #1298430
Virtual baremetal instances have their NICs show up as ens4
which doesn't play nicely as a default in devtest at
the moment.
Ideally we'd want it to be em1 like real baremetal
(which is why we put this in the baremetal element
to begin with). Turns out the baremetal element is
required in devtest so we can extract the ramdisk and kernel
so lets leave it alone for now and move this elsewhere
until we get a better solution for fake 'baremetal'
testing.
Closes-bug: #1298152
Change-Id: Ia71e1d32b93db0c4c844a6dc1ebcd04ab0c13f05
Currently the dpkg element fakes start-stop-daemon, initctl and
invoke-rc.d to stop dpkg from starting a bunch of daemons in the
chroot. This is problematic when packages use service, start, stop or
restart commands.
This patch uses a policy-rc.d instead of faking invoke-rc.d to achieve
the same thing. This approach now aligns exactly with debootstrap.
Without this patch DIB runs on some debian distributions fail
when trying to umount the chroot loop device as there are daemons
running.
The log will now show "invoke-rc.d: policy-rc.d denied execution of
start." instead of "Warning: Fake invoke-rc.s called, doing nothing."
Change-Id: I6db192127aca19b5b7915179b781f5192078bfc7
Related-Bug: #1211564
cloud-init packages are not available in the Debian Wheezy repository.
However, they are available in wheezy-backports.
With this change, the cloud-init packages are installed from
wheezy-backports if DIB_RELEASE is wheezy.
Change-Id: I3daa3b0ba185ba3f7c1bf6b8f9b1f8c167fcb340
Those parameters allow to access the console for VMs using
extlinux (CentOS 6 for example). They are already added to
Fedora images.
Change-Id: I035170bd101062e004fb3782b5f8e5a7944a4f03
Closes-Bug: 1296899
pypi-mirror creates a separate mirror index for wheels (one per OS
that mirrors are built on). To be able to use it one then needs to be
able to export multiple mirrors for inclusion in pip.conf. As a drive
by I made it possible to disable the use of the pypi.python.org index
without using --offline (as --offline has larger impact).
Change-Id: I3e85a8069b18cafd7eae4cd0591821acc3b5a739
Remove the correct ifcfg-eth0 file on Fedora.
This will require an associated incubator change as well
to ensure the undercloud/overcloud now use em1.
Change-Id: I4b4bb7b6a25b058eebe889fd8ce1a403aaf193fd
libmariadb-dev is named mariadb-devel on Fedora. mariadb-devel
package is needed for upcoming mariadb element.
Change-Id: Ib62071a964a4449c4e32ef1646ab7a0fb0f5f7b7
Update the systemd serial port element implementation
so that it uses udev rules. Much nicer than
hard coding ttyS0 and ttyS1.
The udev rule only adds real serial device types
(i.e. == 4). See:
define TTY_DRIVER_TYPE_SERIAL 0x0003
from include/linux/tty_driver.h.
Change-Id: I5d7de4815fd09c01693b7da4b8949f22fee20745
Updates the dhcp-all-interfaces element to fix a race
with the recent udev rules implementation on Fedora.
With the new approach we make the udev rule want (require
to startup) a generic dhcp-interface@.service template which
can be started individually for each interface that is
discovered.
The dhcp-interface@.service is setup such that it:
1) It calls dhcp-all-interfaces <iface> directly with
a pre-exec script. This creates the ifcfg file right
before we need it but avoids the case where network.service
might get greedy and try to start it itself.
2) Only runs if the ifcfg script doesn't already exist. This
is important because we only need to bootstrap the DHCP configs...
Once they exist the network.service will take care of starting them
on reboots, upgrades, etc.
3) On initial boot ensure that the initial DHCP interfaces come
up after network.service. Since we really only want
dhcp-all-interfaces to help bootstrap that haven't already
been configured this seems reasonable.
4) We also try to ensure that cloud-init
comes up after the DHCP interfaces. Cloud init has a decently
long timeout that this wasn't a functional problem but it keeps
log file spew down.
Change-Id: I71b026f027182aad49c3435bb903e5e38e524685
Closes-bug: #1294803
This is being added as a separate element because RHEL 7 is too
different from either RHEL 6 or Fedora to share all of the
configuration they do. It uses the redhat-common element for
pieces that are duplicated.
Some current limitations of the element:
-RHEL 7 is currently still in beta, so final image locations are
not available. This currently defaults to the RHEL 6.5 image,
but that will need to be overridden using the DIB_* env vars.
-There are additional tripleo-image-elements changes that will be
needed to be able to use this for building tripleo images.
-Open vSwitch packages are not currently available in the official
RHEL 7 repos.
-RHEL does not support qemu without kvm acceleration, so at this
time it cannot be used as a compute node for virtualized testing.
Change-Id: I705fd475303576525a27ce6801c673b5721792c9
Add an element intended for use in both Fedora and RHEL. This
allows them to share install steps that are common to both.
Change-Id: Ie4e820a7b777b8701514351b1f802cfe57c3812e
Refactors dhcp-all-interfaces.sh so that if an optional
INTERFACE argument (the first argument) is passed to the script
it only inspects that single interface. If no argument is
passed then the previous default behaviour is used which
causes all interfaces to be inspected.
To avoid a collision with the previous $1 we move to using
$FLOCKED for the exec flock command which runs on distributions
using ENI.
Also sets PATH so that the commands within the script
can all be found if it isn't set properly (/sbin/ip, /bin/cat, etc.)
This is a move towards using udev rules to add these types
of interfaces automatically.
Change-Id: I3ec8fd2cc2071bfc6943c744ca619e31b71146fc
Move whether the package or source install type is enabled out of the
source-repositories element and into the base element.
source-repositories wasn't a great fit for this functionality to begin
with.
Specify the install type for an element via the
DIB_INSTALLTYPE_<install_dir_prefix> environment variable.
Additionally with this approach, any new install type can be added
in an element, without having to update source-repositories or anything
in dib.
You could just write your install type implementation under
nova-foo-install, then define DIB_INSTALLTYPE_nova=foo in your
environment, and the scripts under nova-foo-install would get run during
the image build.
Source installs (any scripts under <install_dir_prefix>-source-install)
is the default install type for all elements.
Change-Id: I9414aca360c41e030e27d3d0c0a52d9d8e13d8b1
Since file to be fetched from the root tftp directory it shouldn't
contain any hardcoded path. Additionaly it eliminates bearing with
map-file containing regular expressions for tftp path replacement.
Change-Id: Iee1672834f735d7dfefce43000540522e1d053b9
Closes-Bug: #1291533
Some of the tripleo-image-elements were failing for RHEL due to lack of
build essential, python-dev and libz-dev.
This commit should fix those failure.
Change-Id: I080f9601faedb3259deada5cfbda7d00d3f13eb9
By default most cloud images have disabled the
udev rules which give us stable network interface names. While
this is a reasonable default for something like EC2 (the target
for these images) this is very bad behavour on bare metal
and can cause a "musical NICs" situation to occur where
on reboot the NIC names get swapped.
In this commit we re-enable stable interface naming by
removing the dev nulled rules softlink and installing
the biosdevname package. Once this is done interface
names should again show up as em1, em2 instead of
the old eth0, eth1.
We also remove some the common, statically configured
eth0 config files on some distributions. Equivalent
files (if needed) may be auto-generated by using
the dhcp-all-interfaces element.
Change-Id: Idd67977342719e2f295e2fa2c0ed6cfa8602171a
As git repositories are copied into the image make a note of their
details and add them to a manifest on the build system.
This allows the code used in building an image to be found after
the image build is completed without needing to open the image up
for inspection.
Change-Id: I7dbe9e163ad38a418cf2869a81e720de2c27dfb1
In 8b2325118f we added a line
so that 98-source-repositories tries to return from the top
level script (not from within a function).
Also, remove the return 1 within the function as well
because we just want to continue in these cases.
Change-Id: I66eddc12208b278594a0a8d8676c38d72045ca75
NFS client utilities for Debian are found in nfs-common, and the
Fedora equivalent is found in nfs-utils. The NFS server components
are already accounted for in the nfs-kernel-server mapping.
Change-Id: I2a43208f54b7fb625c239ce22231c43e194a97ed
Looks like shells only support alphanumeric characters and "_"'s in
environment variables. We were substituting "-" characters but in
order to be able to set overrides in projects with names containing
other characters we need to substitute more, I'm looking at you
oslo.config.
Change-Id: I3e2b1b0bc5871e4ec4ffd8117906cd077aa2cb0d
Co-authored-by: James Polley <jp@jamezpolley.com>
This will allow us to add environment variables to source-repository
scripts. Useful for things like arch-specific download urls.
Change-Id: I4d046825a317dc88db3d7673ad261cedacd1a104
This got removed accidentally in a recent consolidation of
install-packages. Adding it back so that -d support works again.
Closes-bug: #1287142
Change-Id: If17e613bc9bc0f808517edfa1506858d3b9dce54
The RHEL 6 Guest Image has been updated with a new release that
addresses a number of bugs. The diskimage-builder element that
references this file needed to be updated to reference the correct
image name. In addition, some notes to help users download the
image from RHN have been added to the README.
Change-Id: I3c9e64a1887afd9c0b370d70eff4b7f9598cebd1
Closes-bug: launchpad-bug-1286568
This patch alphabetizes the openSUSE packages dictionary in
map-packages. The openstack mappings were left
at the bottom as it looked deliberate.
Change-Id: I3661fba4d4ed68c836893e21fb4a8728c691af20
This patch alphabetizes the Fedora packages dictionary in
map-packages. The openstack mappings were left
at the bottom as it looked deliberate.
Change-Id: I4874c19f2a6826062874698e8f61bc6e2685ab19
Extlinux bootloader configuration in "vm" element requires vmlinuz and
initrd.img files in /boot/ with "generic" suffix. When these don't exist,
bootloader configuration should fall back to using whatever does exist.
Change-Id: I79d426e8f008e9f23db899f0b8f8cf2f23643e28
Testing showed that show-ref did not accurately determine whether a
git repository contained the given reference. Testing with name-rev
showed that it did.
Change the HAS_REF determination appropriately to avoid unnecessary
cache updates when using fixed references.
Change-Id: Iece213348516358af84417807f8dd36e959139eb
Reference to ${GRUB_OPTS:""} in 'vm' element causes syntax error
if GRUB_OPTS is set. Fix by changing to ${GRUB_OPTS:-""}.
Change-Id: Iae3ee8b7c4064c92d0cfc1b5a8caa22e53d6d112
We were applying proxy settings after apt-get install runs are done
in the Ubuntu element, which made it ineffective. Secondly, we were
not applying no_proxy settings to apt, which caused it to fail in
corporate settings. More explicit control may be facilitated in future
but local-config is a DTRT tool, and so we should help it DTRT.
I think I've correctly setup Zypper for this, and I have no idea
how to make the same improvement for Yum (and also Yum currently
doesn't set HTTPS proxies, which may lead to similar reports there).
Change-Id: Idbb9781d64d44b717ea22a25429383fa45d84148
Debian builds fail due to missing rsync in the baseline set
of packages that debootstrap defaults to. Rsync is used by a
variety of tripleo-image-elements and should be included in
disk images by default.
Change-Id: I8d83a53dfab279075e11f9825f15ee960395dd17
Add the DIB_GITREPOBASE variable to the source-repositories element
to enable global changing of git repository location.
Change-Id: Icfac5e103fce6e5a3f1a2db094144a0ed89fcc33
* Rename the cache directory for sources
Make the cache directory name match that of the element that creates
it. This makes it easier to find and more logically implies what
element created the cache directory.
* Add REPONAME to repository cache directory
For better usability add the reponame to the directory created
to cache it.
* Add migration code
Move pre-existing cache directories of the old name to the new name.
Change-Id: Ic62f19acb1746888ccbdf95eebf6e653f3e66357
The current method to rewrite the mirror URL in the ubuntu element will
only rewrite archive.ubuntu.com, which leaves the security URL alone.
This is probably not intended for people who are creating images behind
firewalls.
Change-Id: I54a867e0e9d5a7c94324a5c00ff1a83b4e6e4524
All of the yum-based install-packages scripts are doing essentially
the same thing, so let's use one script for all of the elements
that depend on the yum element.
Change-Id: I49e8c9b44e41bcf4cb9fa820e8a9179754694a97
We need to update vim-minimal, otherwise when rabbitmq-server gets
installed and pulls in vim-common, we run into:
https://bugzilla.redhat.com/show_bug.cgi?id=1066983
Change-Id: I910cd6c5c5fcfc6f6780b86029b1b4e660dd8d05
The pypi element is cool, but some folk have local network mirrors
which we should permit them to use.
Change-Id: Ie840ad1184e72b0e01966eee0298cfd6511b6c19
