Due to the referenced bug, many versions of debootstrap can't bring up
a buster environment. Unfortunately, these include versions we use to
do this on Xenial/Bionic nodes.
Also, there isn't backports or security updates, so elide these for
now.
I did get a working build (I haven't gone so far as a full boot+glean)
with this, at least.
Change-Id: If2420e92cb728ab6e91b0d70547da4483679b391
Paritial-Bug: #1822927
Currently, the cleanup script is using the existence of the folder
/sys/fs/selinux to check if SELinux is enabled. This, however, is
misleading in case disk-image-builder is used inside a Docker
container on a selinux-enabled host. In this case, the folder exists
in the container but SELinux is disabled.
This patch addresses the problem by checking, in addition to the
check already in place, the output of the command selinuxenabled.
Change-Id: I83e58f2467e60df9f0f00f7b7a58d0e2ce357a9a
Closes-Bug: #1820077
This is a mechanically generated change to replace openstack.org
git:// URLs with https:// equivalents.
This is in aid of a planned future move of the git hosting
infrastructure to a self-hosted instance of gitea (https://gitea.io),
which does not support the git wire protocol at this stage.
This update should result in no functional change.
For more information see the thread at
http://lists.openstack.org/pipermail/openstack-discuss/2019-March/003825.html
Change-Id: I40e1a77a1f5c9b5a17aab849fc74a11b5a36854c
This is a mechanically generated change to replace openstack.org
git:// URLs with https:// equivalents.
This is in aid of a planned future move of the git hosting
infrastructure to a self-hosted instance of gitea (https://gitea.io),
which does not support the git wire protocol at this stage.
This update should result in no functional change.
For more information see the thread at
http://lists.openstack.org/pipermail/openstack-discuss/2019-March/003825.html
Change-Id: Id26bec14c3d94e2f81b2148fc85d17f07866398c
This is only one line, but it takes a lot to untangle ... basically
the current "correct" path is:
---
mk_build_dir()
-> sets trap trap_cleanup EXIT
... stuff ..
mount_proc_dev_sys
-> mounts $TMP_MOUNT_PATH/<proc,dev.sysfs>
pre-finalise.d
finalise.d
unmount_image $TMP_BUILD_DIR/mnt # nb == $TMP_MOUNT_PATH
-> unmount_dir()
-> recursive unmount everything inside TMP_MOUNT_PATH
TMP_IMAGE_PATH=$(dib-block-device getval image-path)
export TMP_IMAGE_PATH
dib-block-device umount
dib-block-device cleanup
... actually cleanup directories ...
---
Our current failure exit trap does:
---
dib-block-device umount
unmount_image
...
---
Note this is the *opposite* of what is done in the correct exit path.
In the failure case, if a script fails in the finalise stages it leads
to /proc, /sys, /dev etc. still being mounted inside the image; the
"dib-block-device umount" call doesn't know anything about these
mounts and tries to unmount the parent directory, and we get a hard
failure with a busy mount, and all the mounts are subsequently leaked.
Note that "unmount_dir", which is ultimately called by
"unmount_image", already knows to skip those mounts that
"dib-block-device umount" manages (this is the DIB_MOUNTPOINTS list).
This is further evidence it should be called *before* the
dib-block-device umount.
Change-Id: Ibef3ce9d1167b9c4ff3d5717b113cd3ed374f5e3
Add a DIB_APT_MINIMAL_CREATE_INTERFACES boolean to the debootstrap
element which functions identically to
DIB_YUM_MINIMAL_CREATE_INTERFACES in the yum-minimal element.
This can be used to disable the creation of the
/etc/network/interfaces.d/eth[01] dhcp configuration files, which
are not needed on systems where cloud-init or other means are used
to configure networking.
The flag is enabled by default to keep creating the dhcp interface
files, maintaining backwards compatibility.
Change-Id: I1fdaca8350a5ceefd9e437af4fd000ce6a3ee7f3
in same cases it is required to avoid update all existing packages,
doing so can result in release update which is currently not possible
unless you not include "base" element.
"base" element used for most distribution (rhel, debain), and is
necessary for most cloud operations, this patch add
"DIB_AVOID_PACKAGES_UPDATE" parameter to skip updating all packages.
usecases for this patch can be:
* Avoid release update when building old release ex. RHEL7.5.
* build on network-less environment.
usage:
DIB_AVOID_PACKAGES_UPDATE=1
or
DIB_AVOID_PACKAGES_UPDATE=0
Change-Id: I71192b23c8f0bc48b348fe7377bf8a2399b53792
Related to I041a141366099093805e6052b1bbf64efd277e1e, we also need to
remove this on opensuse. The files for gate testing are added, but
the test is not added to any jobs at this point in the interests of
gate time.
Change-Id: I1af9e84d76bedcb2607717edc6d2abe2920b0584
This fixes a regression in I041a141366099093805e6052b1bbf64efd277e1e
where we starting skipping the removal of old files for image-based
builds (confusingly named centos7 rather than centos for historical
reasons). Fix the check
Change-Id: I74688a9e91d833b5d654056431729bed0585616c
As described inline, we only want to remove the system package files
on centos; it causes problems on Fedora where some system tools expect
these to be there.
But there is an additional bug -- pip actually removes the system
package files anyway. To work around this, reinstall the system
package.
Closes-Bug: #1813232
Change-Id: I041a141366099093805e6052b1bbf64efd277e1e
As described in the comments, it seems the transition between
dbus-daemon -> dbus-broker in Fedora 29 has made it so the packages
can get into a state where neither service is enabled.
Explicitly install and enable dbus-broker for F29
Change-Id: I06753043a75be2f635653899c6c251b9fbdd7c67
setuptools is required by python3-setools (a dependency of
policycoreutils-python) but is not in setools RPM dependency list in
Fedora 28. See [1] for DIB output.
This is a temporary workaround. It was fixed in Fedora rawhide and
Fedora 29 [2], but Fedora 28 is still unresolved.
[1] http://logs.openstack.org/81/600381/10/check/octavia-v2-dsvm-scenario-\
fedora-latest/4ac1e5c/controller/logs/dib-build/amphora-x64-haproxy.\
qcow2_log.txt.gz#_2019-01-21_10_15_49_816
[2] https://bugzilla.redhat.com/show_bug.cgi?id=1623371
Change-Id: Ie8c827d8217d885c3031c4f45aa2556951b01e83
The path $TMP_BUILD_DIR/mnt becomes the / inside the chroot during
the chroot phases of diskimage-builder. Previously this path was being
created using the account running diskimage-builder. This account may
not be valid inside the chroot. This causes path validation, when running
on a Ubuntu bionic host, to fail.
This patch chown's the $TMP_BUILD_DIR/mnt to root.root to make sure
that / is owned by a valid account inside the chroot.
Change-Id: Ifedc136baa67c7952942aed2c8cb1041902fef91
Closes-Bug: 1811113
Change order of default tox envlist in order of likeliness to fail on a
new change and add py37 and py36.
Change-Id: I9d21561991c1d956a62de72c906cf91305ce5328
