In exploring Gentoo caching, it was realised that we have no way to
bind mount the cache into the finalised image for the finalise.d
phases.
By adding a pre-finalise.d phase that runs outside the chroot, we can
mount outside things into the hierarchy at $TMP_BUILD_DIR/mnt which
are then seen by the in-chroot finalise.d phase.
This is similar to the pre-install phase
Change-Id: I9d782994843383ddf90f62c40498af9925fd9558
Some minor things after looking at these parts.
The dib-run-parts element doesn't do any of the copying any more, so
these comments are wrong.
The reason for the multiple mounts in the bind mount was non-obvious
to modern eyes (as util-linux has handled this for some time).
Formatting fix for the rst
Change-Id: Idb4c9ff32c49aced2c68a5c905bf7a8b2832a5a2
With the check added in commit 7566819139,
diskimage-builder fails to build RPM-based images if kauditd is not
running. However, this is only valid for environments where SELinux is
enabled. If SELinux is disabled (which is identified by an empty _runcon
variable), proceed with running setfiles.
Change-Id: I1b056f20a3a55f7333391207d9e1049d25ece041
Closes-Bug: #1779273
The grub.cfg has two variables [1]
GRUB_CMDLINE_LINUX : used on all boots
GRUB_CMDLINE_LINUX_DEFAULT : additionally used on all "normal" boots
The problem with I2298675dda1f699c572b3423e7274bc8bd7c1c9d is that it
appened the values in DIB_BOOTLOADER_DEFAULT_CMDLINE to both of these,
resulting in duplicated arguments. I don't think we considered that
GRUB_CMDLINE_LINUX_DEFAULT actually already appends to the
GRUB_CMDLINE_LINUX values.
Make DIB_BOOTLOADER_DEFAULT_CMDLINE only append itself to
GRUB_CMDLINE_LINUX_DEFAULT. That seems to line up sensibly with the
name of the variable.
Documentation is enhanced around this, and a releasenote added.
[1] https://help.ubuntu.com/community/Grub2/Setup
Change-Id: I76b5442a9090c19a6540ed2d4ab324546f241ebf
Closes: #1791736
Without this fix, building a CentOS image on Ubuntu where audit=0 is passed
as a kernel boot parameter will lead to the following error:
disk-image-create centos7 dhcp-all-interfaces cloud-init-nocloud \
devuser yum epel baremetal
... dib-run-parts Running tmpdir/hooks/cleanup.d/99-selinux-fixfiles-restore
... Error connecting to audit system.
Change-Id: I229d9b72f88bffddca42da57f01c27e902427071
Due to the arm naming convention, building centos images for arm64 and
aarch64 does not yield the same result. In order to locate grub2 on
aarch64 the correct mapping is added.
Change-Id: I1bb227b2523e420e394fec8c52c6c79fcdd31c53
Closes-Bug:#1789414
Signed-off-by: Charalampos Kominos <Charalampos.Kominos@enea.com>
This replaces the deprecated (in python 3.2) unittest.TestCase method
assertRaisesRegexp() with assertRaisesRegex().
Change-Id: I0ac482741ad4adc1127dd9e9f64c1c8101f370e5
Signed-off-by: Chuck Short <chucks@redhat.com>
Currently there is a bug, that tries to detach the device from a
partition at the first try, without considering that there may be
other partitions and volumes on it. Ensure that the detach is done
properly, and add a test to ensure that this happens correctly.
Change-Id: I35c5a473509f17a70270a2cbf5bf579faaeb123a
Fixes-Bug: #1777861
A recap -- we run umount phase then cleanup phase.
Currently we register a object to do the final LVM cleanup based on
the parent PV. In light of I697bfbf042816c5ddf170bde9534cc4f0c7279ff,
I believe this should just be done in the cleanup phase. Note there
was probably additional confusion because the partition removal was
done in the cleanup phase until
I7af3c5cf66afd81a481f454b5207af552ad52a32, where is was moved into the
umount phase.
Thus it is moved into the cleanup() function and this should now run,
per the comment, after everything is unmounted in umount phase.
This also exposes that we didn't have the cleanup phase in the unit
tests (because it wasn't doing anything I guess). Add it.
Change-Id: I1c5f4ffc9619c774f78d21b918a81647b3dc28f5
This ensures nouveau is not loaded at boot, which is required when installing
NVIDIA GPU drivers and to avoid issues with PCI passthrough of NVIDIA GPUs.
The option to disable kernel modesets ensures that it can be unloaded again if
it happens to be loaded after boot (e.g manually or implicitly by X).
bp tripleo-vgpu
Change-Id: I60815de86e7b22dfb39555af9d2d53564841e2ab
Related-bug: 1774674
modprobe element currently fails when DIB_MODPROBE_BLACKLIST is not set.
As there are now two methods to control blacklisting this should be optional.
Change-Id: Ibf3c31a95177ba88c1b93228490c7f36f5b70b57
In some cases cache-url can get pulled in without curl, causing it to
fail.
Co-Authored-By: Adam Harwell <flux.adam@gmail.com>
Change-Id: Ibd66c2ca4f8cc423783555d8a99b1184f43adff2
This review squashes:
Iac9afc7766d3640815dc20cfd6de1245d36a09cc
Ie894b5801bd7b3815432882cd626941e89d9f9a1
We need to do this as we can't fix pylint without networkx as that
failes requirements-chak due to us having a cap on networkx and we can't
uncap networkx as part of tripleo-buildimage installs without
constratints which gets us 2.1 and DIB desn't support 2.x
This is the commit message Iac9afc7766d3640815dc20cfd6de1245d36a09cc
---
One of the pylint dependencies has updated to be python3 only; this
version of pylint correctly caps things so it still works with
python2.
This also exposes that we need to uncap networkx due to
I34045f87ca19c2f184b040f4d89347374cce518b. We should remain on
version 1 for now thanks to upper-constraints, but we need to maintain
the lower-constraint.
---
This is the commit message Ie894b5801bd7b3815432882cd626941e89d9f9a1
---
Support different versions of networkx
Since the entry of networkx 2.0 nodes has a different
behaviour. Checking if dg.nodes is iterable is enough to add
compatibility for new/older versions.
---
Change-Id: I82dc61fac6c156a4f0d574290c7632077aa53195
Without this fix, a LVM based ubuntu-minimal image will fail
booting due to the fact that the boot process will not be able
to retrieve the root filesystem using LABEL=(cloud)img-rootfs
Change-Id: If4ecf65868563f7b799160a58af6312bedf956bf
This patch adds an expected semicolon to an end of statement in
dhclient.conf for dhcp-all-interfaces element. Without this fix, an
error occurs when an image is booted with a message,
'semicolon expected.'.
Change-Id: I8311dbc67cc2815223111da01e7a7517c7d6f059
When building with debootstrap, debootstrap will use the key to check
that everything is properly signed. It will not `apt-key add` the key
into the final environment, however.
Early adding the key after debootstrap before we need to read from the
private repo again prevents unsigned issues. This also maintains the
integrity of the packages in the environment throughout the build.
Change-Id: I5ca75ae4620c9fb26b512cb30f8cd79fa7a0373a
Similar to I697bfbf042816c5ddf170bde9534cc4f0c7279ff, the order of
things called is "dib-block-device umount" *then* "dib-block-device
cleanup".
Because we're doing the "kpartx -d" here in cleanup, it means that the
loop-device is removed in umount phase from level0/localloop.py, then
afterwards we try and remove the partitions.
Change-Id: I7af3c5cf66afd81a481f454b5207af552ad52a32
TODO: a test case to ensure the ordering
One call in localloop requires the output of the command, so modify
exec_sudo to buffer up output and return it. This is modelled on the
same thing in package-installs-v2 which seems to work. Rather than
return a subprocess exception, return a dib exception which everything
should have imported anyway.
The overall reason for this is to make our external calls more
consistent for mocking in unit testing.
Change-Id: I10d23b873dee9f775daef2a4c8be5671d02c386e
This element will replace modprobe-blacklist element. It wil
still have the blacklist functionality, but it also adds
the feature of passing a complete file with settings to the
modprobe.d directory. Adding this functionality, that will
allow elements that depends on this module, to just copy the
specified files to the final directory.
Change-Id: I9a44f7d11520b8b1e604956d3c1db2fc7e2bf457
As described in blockdevice.py detachment and (most) resources
release must be done in the umount phase of a block device module.
Until now these jobs were done in the lvm cleanup() phase - which
is too late - especially when using nested LVMs.
This patch moves the functionality of the cleanup() phase to the
umount() phase for the lvm module.
It includes a test case that fails without applying the provided
source code changes.
Change-Id: I697bfbf042816c5ddf170bde9534cc4f0c7279ff
Signed-off-by: Andreas Florath <andreas@florath.net>
Our sgdisk calls are putting extra double-quotes around the names of
partitions. This confuses sfdisk, which confuses growpart, which
confuses growroot ... and you don't get your partition grown for EFI
boot.
Ensure we just bunch arguments into the list directly (for Popen)
rather than string split and have to worry about quoting. Add a check
for this to our GPT unit test, extending it to include a space in the
name of the root partition.
Change-Id: I0a8cb69bb4c9c0865fbaa63ba0d7210028da552e
The existing directories are needed for stage building (a part of the
Gentoo build process). Normally these directories are empty, but there
are times where overrides need to be defined. This commit handles
existing overrides for keywords. For historical reasons the overrides
were able to be put in different files and directories, this
centralizes them.
This also updates the version of openssl/cryptography that works with
or without bindist.
Change-Id: I62c934ed305a711a4a9a3ef01fa55ad142aebb78
This patch adds an element that handles the configuration for
creating a disk capable of being a remote root filesystem through
iSCSI on CentOS images.
Tested on Fujitsu Server and boot with BIOS and UEFI mode successfully.
- Tested Boot-From-Volume + EFI for centos7 with following elements:
"centos7 vm devuser cloud-init-datasources dhcp-all-interfaces
iscsi-boot dracut-regenerate block-device-efi"
Co-authored-By: Nguyen Van Trung <trungnv@vn.fujitsu.com>
Change-Id: Ia1f23d722dced6f254fd7aee86abe8066a72fa42
