The dhcp-all-interfaces element does not work with the predictable names
scheme, fallback to the persistent names scheme as workaround.
Bug: 1960301
Change-Id: I117964a60615a5b7e9984f52f02cd018d1a48ed0
NetworkManager is quite capable to do automatic
interface configuration. NetworkManager will by default
try to auto-configure any interface with no configuration.
It will use DHCP for IPv4 and Router Advertisements to
decide how to initialize IPv6.
It will most likely do it just as good, or better than the
dhcp-all-interfaces.sh script.
Since dhcp-all-interfaces clean out all ifcfg files in
60-remove-cloud-image-interfaces it means NetworkManager will
by default attempt auto configuration for all interfaces.
This change add's and environment variable:
DIB_DHCP_NETWORK_MANAGER_AUTO (default: false)
When DIB_DHCP_NETWORK_MANAGER_AUTO is set to `true` only the
NetworkManager config will be written. The dhcp-all-interfaces
service will not be installed. Hence dhcp-all-interfaces will
not write any config files, allowing NetworkManager to just do
it's thing.
Change-Id: Id6f8d6aaaf52a78175bb6c065ec88274c364834e
NetworkManager takes a distinctly differnet network management
approach and the bulk of the dhcp-all-interfaces code is largely
targetted at distribution specific configuration. Some which may
or may not override settings, or only partially assert desirable
settings.
As such, we need to set appropriate configuration, such as the
correct client to be used, and timeouts based upon user supplied
settings.
By default this change sets the client to be dhclient on redhat
styled machines, as the packaging default, while it works for
ramdisk usage, it does not reset the interface between retries,
which can be critical if the infrastucture operator is attempting
to configure LACP trunks to the end node.
Change-Id: I0e0cfbdbf7ef2b2861b934ccd7dab9d83a35c8f0
Story: 2008001
Task: 40648
The ndisc6 package is not yet available in EPEL 8.
See: https://bugzilla.redhat.com/show_bug.cgi?id=1779134
Until the package is available set the pkg-map to "" for
the ndisc6 package when distro is redhat and install the
package using || true in the element script instead so
that CentOS 8 build's do not fail because of the missing
package.
Once the package is in EPEL 8 this change can be reverted.
Related-Bug: #1754219
Change-Id: Icd4bad8852ce5ba40fb0e7b0d335191efbe88c67
When the rdisc6 utility is available probe for router
advertisement. configure eni and rhel-netscripts interfaces
to do IPv6 address configuration according to the flags
in the RA recived from the router.
The systemd service file timeout is DIB_DHCP_TIMEOUT * 2,
so that DHCPv4 can timout, and dhcpv6 run before the service
times out.
Retries are commented in dhclient.conf, without it we end up
trying DIB_DHCP_TIMEOUT * 60 before the client move on to
IPv6.
WHEN:
Stateful address conf. : No
Stateful other conf. : No
THEN:
Do not run dhclient at all, autoconfiguration via
SLAAC only.
WHEN:
Stateful address conf. : No
Stateful other conf. : Yes
THEN:
Run "dhclient -6 -S", The ``-S`` option makes the
dhcp client not request an address, only other
options such as DNS servers and NTP servers from
DHCPv6 server.
WHEN:
Stateful address conf. : Yes
Stateful other conf. : Yes
THEN:
The dhcp client should request an address _and_ other
options such as DNS servers and NTP servers from
DHCPv6 server.
NOTE: No IPv6 support added for suse-netscripts
Closes-Bug: 1754219
Change-Id: Icdc79875c33f894ab7eaec8afdfb33a731efff99
This patch adds an expected semicolon to an end of statement in
dhclient.conf for dhcp-all-interfaces element. Without this fix, an
error occurs when an image is booted with a message,
'semicolon expected.'.
Change-Id: I8311dbc67cc2815223111da01e7a7517c7d6f059
On initial boot when networking is brought up by cloud-init this
is the timeout that dhclient adheres to. Centos configures
"timeout 300" (for an EC2 bug) in their cloud image, which results
in a 5 minutes delay to boot in cases where no dhcp available (e.g. IPv6
SLAAC). To reduce this boot delay and to provide consistency with
places where we have set other dhcp timeouts set this to DIB_DHCP_TIMEOUT.
Change-Id: I119a002070501c3dfe7c6730b07ee25f422b85b0
Related-Bug: #1758324
In slow networks like Infiniband it takes much time for the
interface to get the carrier. This patch enables this service
to run more then 20 seconds and limited by DIB_DHCP_TIMEOUT.
Change-Id: I8a6015567ac25e37b5a5aba4b1fda71170cc144a
Currently we have all our elements and library files in a top-level
directory and install them into
<root>/share/diskimage-builder/[elements|lib] (where root is either /
or the root of a virtualenv).
The problem with this is that editable/development installs (pip -e)
do *not* install data_files. Thus we have no canonical location to
look for elements -- leading to the various odd things we do such as a
whole bunch of guessing at the top of disk-image-create and having a
special test-loader in tests/test_elements.py so we can run python
unit tests on those elements that have it.
data_files is really the wrong thing to use for what are essentially
assets of the program. data_files install works well for things like
config-files, init.d files or dropping documentation files.
By moving the elements under the diskimage_builder package, we always
know where they are relative to where we import from. In fact,
pkg_resources has an api for this which we wrap in the new
diskimage_builder/paths.py helper [1].
We use this helper to find the correct path in the couple of places we
need to find the base-elements dir, and for the paths to import the
library shell functions.
Elements such as svc-map and pkg-map include python unit-tests, which
we do not need tests/test_elements.py to special-case load any more.
They just get found automatically by the normal subunit loader.
I have a follow-on change (I69ca3d26fede0506a6353c077c69f735c8d84d28)
to move disk-image-create to a regular python entry-point.
Unfortunately, this has to move to work with setuptools. You'd think
a symlink under diskimage_builder/[elements|lib] would work, but it
doesn't.
[1] this API handles stuff like getting files out of .zip archive
modules, which we don't do. Essentially for us it's returning
__file__.
Change-Id: I5e3e3c97f385b1a4ff2031a161a55b231895df5b
2016-11-01 17:27:41 -07:00
Renamed from elements/dhcp-all-interfaces/install.d/50-dhcp-all-interfaces (Browse further)
