cloud-init packages are not available in the Debian Wheezy repository.
However, they are available in wheezy-backports.
With this change, the cloud-init packages are installed from
wheezy-backports if DIB_RELEASE is wheezy.
Change-Id: I3daa3b0ba185ba3f7c1bf6b8f9b1f8c167fcb340
Those parameters allow to access the console for VMs using
extlinux (CentOS 6 for example). They are already added to
Fedora images.
Change-Id: I035170bd101062e004fb3782b5f8e5a7944a4f03
Closes-Bug: 1296899
pypi-mirror creates a separate mirror index for wheels (one per OS
that mirrors are built on). To be able to use it one then needs to be
able to export multiple mirrors for inclusion in pip.conf. As a drive
by I made it possible to disable the use of the pypi.python.org index
without using --offline (as --offline has larger impact).
Change-Id: I3e85a8069b18cafd7eae4cd0591821acc3b5a739
Remove the correct ifcfg-eth0 file on Fedora.
This will require an associated incubator change as well
to ensure the undercloud/overcloud now use em1.
Change-Id: I4b4bb7b6a25b058eebe889fd8ce1a403aaf193fd
libmariadb-dev is named mariadb-devel on Fedora. mariadb-devel
package is needed for upcoming mariadb element.
Change-Id: Ib62071a964a4449c4e32ef1646ab7a0fb0f5f7b7
Update the systemd serial port element implementation
so that it uses udev rules. Much nicer than
hard coding ttyS0 and ttyS1.
The udev rule only adds real serial device types
(i.e. == 4). See:
define TTY_DRIVER_TYPE_SERIAL 0x0003
from include/linux/tty_driver.h.
Change-Id: I5d7de4815fd09c01693b7da4b8949f22fee20745
Updates the dhcp-all-interfaces element to fix a race
with the recent udev rules implementation on Fedora.
With the new approach we make the udev rule want (require
to startup) a generic dhcp-interface@.service template which
can be started individually for each interface that is
discovered.
The dhcp-interface@.service is setup such that it:
1) It calls dhcp-all-interfaces <iface> directly with
a pre-exec script. This creates the ifcfg file right
before we need it but avoids the case where network.service
might get greedy and try to start it itself.
2) Only runs if the ifcfg script doesn't already exist. This
is important because we only need to bootstrap the DHCP configs...
Once they exist the network.service will take care of starting them
on reboots, upgrades, etc.
3) On initial boot ensure that the initial DHCP interfaces come
up after network.service. Since we really only want
dhcp-all-interfaces to help bootstrap that haven't already
been configured this seems reasonable.
4) We also try to ensure that cloud-init
comes up after the DHCP interfaces. Cloud init has a decently
long timeout that this wasn't a functional problem but it keeps
log file spew down.
Change-Id: I71b026f027182aad49c3435bb903e5e38e524685
Closes-bug: #1294803
This is being added as a separate element because RHEL 7 is too
different from either RHEL 6 or Fedora to share all of the
configuration they do. It uses the redhat-common element for
pieces that are duplicated.
Some current limitations of the element:
-RHEL 7 is currently still in beta, so final image locations are
not available. This currently defaults to the RHEL 6.5 image,
but that will need to be overridden using the DIB_* env vars.
-There are additional tripleo-image-elements changes that will be
needed to be able to use this for building tripleo images.
-Open vSwitch packages are not currently available in the official
RHEL 7 repos.
-RHEL does not support qemu without kvm acceleration, so at this
time it cannot be used as a compute node for virtualized testing.
Change-Id: I705fd475303576525a27ce6801c673b5721792c9
Add an element intended for use in both Fedora and RHEL. This
allows them to share install steps that are common to both.
Change-Id: Ie4e820a7b777b8701514351b1f802cfe57c3812e
Refactors dhcp-all-interfaces.sh so that if an optional
INTERFACE argument (the first argument) is passed to the script
it only inspects that single interface. If no argument is
passed then the previous default behaviour is used which
causes all interfaces to be inspected.
To avoid a collision with the previous $1 we move to using
$FLOCKED for the exec flock command which runs on distributions
using ENI.
Also sets PATH so that the commands within the script
can all be found if it isn't set properly (/sbin/ip, /bin/cat, etc.)
This is a move towards using udev rules to add these types
of interfaces automatically.
Change-Id: I3ec8fd2cc2071bfc6943c744ca619e31b71146fc
Move whether the package or source install type is enabled out of the
source-repositories element and into the base element.
source-repositories wasn't a great fit for this functionality to begin
with.
Specify the install type for an element via the
DIB_INSTALLTYPE_<install_dir_prefix> environment variable.
Additionally with this approach, any new install type can be added
in an element, without having to update source-repositories or anything
in dib.
You could just write your install type implementation under
nova-foo-install, then define DIB_INSTALLTYPE_nova=foo in your
environment, and the scripts under nova-foo-install would get run during
the image build.
Source installs (any scripts under <install_dir_prefix>-source-install)
is the default install type for all elements.
Change-Id: I9414aca360c41e030e27d3d0c0a52d9d8e13d8b1
Some of the tripleo-image-elements were failing for RHEL due to lack of
build essential, python-dev and libz-dev.
This commit should fix those failure.
Change-Id: I080f9601faedb3259deada5cfbda7d00d3f13eb9
By default most cloud images have disabled the
udev rules which give us stable network interface names. While
this is a reasonable default for something like EC2 (the target
for these images) this is very bad behavour on bare metal
and can cause a "musical NICs" situation to occur where
on reboot the NIC names get swapped.
In this commit we re-enable stable interface naming by
removing the dev nulled rules softlink and installing
the biosdevname package. Once this is done interface
names should again show up as em1, em2 instead of
the old eth0, eth1.
We also remove some the common, statically configured
eth0 config files on some distributions. Equivalent
files (if needed) may be auto-generated by using
the dhcp-all-interfaces element.
Change-Id: Idd67977342719e2f295e2fa2c0ed6cfa8602171a
As git repositories are copied into the image make a note of their
details and add them to a manifest on the build system.
This allows the code used in building an image to be found after
the image build is completed without needing to open the image up
for inspection.
Change-Id: I7dbe9e163ad38a418cf2869a81e720de2c27dfb1
In 8b2325118f we added a line
so that 98-source-repositories tries to return from the top
level script (not from within a function).
Also, remove the return 1 within the function as well
because we just want to continue in these cases.
Change-Id: I66eddc12208b278594a0a8d8676c38d72045ca75
