Commit Graph

433 Commits

Author SHA1 Message Date
Clark Boylan
5b5b78bf59 Set router solicitation delay with using NM
The linux kernel and NetworkManager fight each other over control for
interface management when router advertisements are in use. Long story
short if the linux kernel configures a network interface for ipv6
before NetworkManager attempts to manage that interface then NM will
ignore the interface and not configure ipv4 on it.

This can happen because the kernel is configured to send router
advertisements solicitations which result in router advertisements which
the kernel uses to configure the interface(s). There is a default of a 1
second delay before sending the solicitation which in many cases is long
enough that NM has started before then. However, in slower environments
like those used for testing with qemu this isn't long enough.

Some testing by hand indicates that 15 seconds is about right so
increase the delay to 15 seconds via sysctl.conf.

Note this may increase boot times in ipv6 only environments (though it
is hard to be sure due to how systemd starts everything at once and does
socket activation and the like).

Change-Id: I475a253091cbaf63687b91c748c31a6753bb0f57
2019-07-10 08:33:17 -07:00
Matthew Thode
d8f796e153
install gnupg2 by default in debian-minimal
debian-minimal depends on debootstrap which depends on dpkg

This needs to be installed early as dpkg installs the apt keys early via
02-add-apt-keys in pre-install.d

Change-Id: I8580849ceaa7a5152c94f29afa890ac6d6983fb1
2019-07-01 14:28:01 -05:00
Zuul
091a4e2c6e Merge "debootstrap: make default network interface names configurable" 2019-06-28 06:30:46 +00:00
Zuul
2c5fc5f8f9 Merge "Enable nodepool testing for opensuse 15.1" 2019-06-28 06:26:58 +00:00
Dirk Mueller
97444ad92e Enable nodepool testing for opensuse 15.1
There are several jobs depending on working opensuse 15.1
images in nodepool, so it makes sense to ensure its working.
Also upgrade the previously marked experimental opensuse-15.0
job as it tests the xenial->opensuse combination, which is
particularly difficult to keep working and we'll need it in
the CI.

Change-Id: Icb6d998756ce5221e017959dcb59b21f0f023454
2019-06-27 19:59:45 +02:00
Zuul
f27a0dfc26 Merge "Add DIB_UBUNTU_KERNEL to ubuntu-minimal" 2019-06-25 22:48:50 +00:00
Michael Johnson
e433aebf7d Add DIB_UBUNTU_KERNEL to ubuntu-minimal
This patch adds a new environment variable to the ubuntu-minimal
element called DIB_UBUNTU_KERNEL that allows you to specify the kernel
meta package that will be using to install the kernel inside the image.
It supports "linux-image-generic" (The default), "linux-image-kvm", and
"linux-image-virtual".
This allows building images that are smaller in size (~200MB smaller
qcow2) that have only the kernel modules necessary for virtual
machines.

Change-Id: I8ce65e1d357d15e8ed8995ad1dcaea02bbd1986f
2019-06-20 10:18:23 -07:00
jacky06
8dd7ca720f Sync Sphinx requirement
1. Sync sphinx dependency with global requirements. It caps python 2 since
sphinx 2.0 no longer supports Python 2.7.
2. Update some URLs to latest
3. Remove the unnecessary space

Change-Id: I5464be9e055feecd80918f691448acf5f100e701
2019-06-18 23:29:52 +08:00
Zuul
4afcba1fea Merge "Move pypi to dib-python" 2019-06-18 06:49:37 +00:00
Zuul
e281c4dae9 Merge "Use architecture-specific grub2 RPMs on RHEL8" 2019-06-18 06:49:35 +00:00
Zuul
c46f8714e3 Merge "Remove the rhel 8 check for xfs" 2019-06-18 06:49:34 +00:00
Zuul
fe618002ff Merge "Update test coverage for openSUSE/-minimal to 15.1" 2019-06-18 06:21:21 +00:00
Dirk Mueller
a81cf9e231 Update test coverage for openSUSE/-minimal to 15.1
Use openSUSE 15.1 as default, which is the latest released stable
openSUSE release.

Remove leftovers for unmaintained openSUSE 42.2 images.

Depends-On: https://review.opendev.org/#/c/660126/
Change-Id: I0b204b7b3d7ae74b6749320b3bfe1ca89d154ebb
2019-06-13 09:20:40 +02:00
Michael Johnson
5f4b764a11 Remove the rhel 8 check for xfs
This patch removes the check and default for rhel 8 requiring
xfs filesystem as rhel 8 images can successfully be built with
ext4 filesystems.

Change-Id: I1a6bfa26324fd43ae0c77c2c977dda0dd56e26e5
2019-06-12 07:01:36 -07:00
Andreas Florath
05af0fc863 debootstrap: make default network interface names configurable
Nowadays, in the time of Predictable Network Interface Names, the
network interface names 'ethX' are not used that often any more.
Depending on the virtualization layer and the guest OS names like
'ens3', 'enp1s0' or 'enp0s31f6' are used.
This patch enables the user to set DIB_NETWORK_INTERFACE_NAMES to a
list of network interfaces which are brought up using DHCP during
(first) boot.

Change-Id: I04cc2ee710f0389a8085b1c91d9329784cb28048
Signed-off-by: Andreas Florath <Andreas.Florath@telekom.de>
2019-06-12 13:53:38 +00:00
Maksim Malchuk
ea9ab89829 Move pypi to dib-python
The latest Fedora/Ubuntu images don't ship python2 by default, so we
need to use our dib-python wrapper for this so we work in python3 only
environments.

This change also correctly creates the pip.conf and .pydistutils.cfg
files with trusted host extracted from the index-url.

Related-bug: 1577105

Change-Id: Ibb5348af3e3bbe46b19affe90a8930a4b4ad4cad
Signed-off-by: Maksim Malchuk <maksim.malchuk@gmail.com>
2019-06-10 20:43:09 +03:00
Dmitry Tantsur
928c6e61f0 ironic-agent: install mdadm on the ramdisk
The newly introduced software RAID support requires it.

Change-Id: Ic438865006f1472abc0c9f4d40cc40c91b4ada71
2019-06-07 14:05:41 +02:00
Lon Hohberger
0cf0942068 Use architecture-specific grub2 RPMs on RHEL8
RHEL8 ships a bunch of grub2-efi-X-modules in its main
repository, each of which provides grub2-efi-modules,
potentially causing nondeterminism when building images.

This changes the DIB elements to always use architecture-
specific RPMs when RHEL8 is selected.

Change-Id: If94f3721195d5ecd80036e4234a3ca223a19c349
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1716672
2019-06-06 10:50:51 -04:00
Zuul
7f469e3e83 Merge "Increase size of EFI system partition (again)" 2019-05-31 09:05:17 +00:00
Zuul
d323928af0 Merge "Makes image caching more resilient" 2019-05-31 08:54:31 +00:00
Zuul
d6f43865ed Merge "fail early when lates build information can not be fetched" 2019-05-31 08:45:50 +00:00
Zuul
21676bd350 Merge "Add option to skip update packages" 2019-05-31 08:13:38 +00:00
Zuul
49930da885 Merge "Deprecate rhel7 in favor of rhel" 2019-05-31 08:01:13 +00:00
Zuul
4367dd2dd3 Merge "Add version-less RHEL element for RHEL7 and RHEL8" 2019-05-31 07:56:50 +00:00
Pierre Riteau
7fd52ba841 Increase size of EFI system partition (again)
When I said in I8594d1fe05242f246a5809740a115ab2f84ac5a3 that 12 MiB
ought to be enough, I should have expected that I would be proven wrong.
While 12 MiB is enough to fit shim-x64 and grub2-efi-x64, yum fails to
update these packages to newer versions:

Transaction check error:
  installing package shim-x64-15-2.el7.centos.x86_64 needs 7MB on the /boot/efi filesystem
  installing package grub2-efi-x64-1:2.02-0.76.el7.centos.1.x86_64 needs 3MB on the /boot/efi filesystem

Error Summary
-------------
Disk Requirements:
  At least 7MB more space needed on the /boot/efi filesystem.

It is recommended that the ESP partition be much bigger. This commit
bumps its size to 550MiB, following guidelines from Rod Smith to avoid
incompatibilities with some EFIs [1].

[1] https://www.rodsbooks.com/efi-bootloaders/principles.html

Change-Id: If9515234f1a803cda32b2482f8abe10ddf0e6d26
2019-05-31 17:10:08 +10:00
Sorin Sbarnea
fb656718fb Makes image caching more resilient
Avoids failing on the first attempt to download the image to cache as
mirrors hosting them can randomly go down, usually with a connection
refused.

Change-Id: I9de9f33c2cc16596d04b35c4eb92621e6a2c7511
2019-05-31 16:31:43 +10:00
Dirk Mueller
421a0fa541 fail early when lates build information can not be fetched
When the mirror returns a error, it was trying to interpret the error
message (e.g. <html><title>Internal server error..) as a download link.
By using -f on curl we get an empty reply and an exit code, which, as
we run in set -e mode, aborts.

Change-Id: Ibaa39aedb7db286f859c4b090114c6a233b150c7
2019-05-31 16:09:25 +10:00
Zuul
ed6dfd87e5 Merge "allow the use of non-bzip compressed stages for building gentoo" 2019-05-31 04:42:07 +00:00
Nir Magnezi
433a374748 Deprecate rhel7 in favor of rhel
The rhel7 element is deprecated and is left only for backward
compatibility.
The rhel element should be used instead. Users should set DIB_RELEASE to
'7' to indicate which release you are using.

The new element is a version-less RHEL element to handle both '7'
and '8' DIB_RELEASE, which aligns with other elements which operate in
the same way such as the Fedora element.

Change-Id: Ic39ed85cacae9942448eb18ad685763f9369c2ed
2019-05-29 12:07:44 +00:00
Nir Magnezi
ee46e2f9b7 Add version-less RHEL element for RHEL7 and RHEL8
Make a version-less RHEL element to handle both '7' and '8' DIB_RELEASE.
The element usage should align with other elements which operate in the
same way such as the Fedora element.

Additionally, this patch adds support for RHEL8 that operates with
Python 3.
As of now, users of diskimage-builder will still be able to use the
'rhel7' element, or migrate to 'rhel' and specify their respective
DIB_RELEASE value.

* mount the xfs file-system for extraction as read-only.  vaguely
  based on explaination in [1] and the fact we only read the image
  data into a tar, so can ignore this.

    XFS (dm-1): Superblock has unknown read-only compatible features (0x4) enabled.

* Use the redhat system python as the dib-python version.  dib was
  ahead of it's time making an abstracted python interpreter for
  system work ;) the system python should work for running the various
  dib element scripts.

[1] https://unix.stackexchange.com/questions/247550/unmountable-xfs-filesystem

Redhat-Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1700253
Co-Authored-By: Ian Wienand <iwienand@redhat.com>
Change-Id: I90540675c70bb475d9db2ae24f81c648a31f3f95
2019-05-29 11:28:53 +03:00
Matthew Thode
afcac1922c
allow the use of non-bzip compressed stages for building gentoo
Upstream is switching to xz so we need to be able to support it.

Change-Id: I382cc3e8038e2e552c553c526a990a01e51aeb12
2019-05-24 09:32:57 -05:00
Zuul
c47a9d5001 Merge "Replace git.openstack.org URLs with opendev.org URLs" 2019-05-24 08:03:47 +00:00
melissaml
a6322c6ed0 Replace git.openstack.org URLs with opendev.org URLs
Change-Id: I03e9162d5a59a2aa1631a9ecf6f6833bb7ac6050
2019-05-16 14:45:52 +08:00
Dirk Mueller
c7ac6ee0cb Update test coverage for openSUSE/-minimal to 15.0
Use openSUSE 15.0 as default, which is the latest released stable
openSUSE release. Switch to https for accessing download.o.org
as encrypted transfers should be used by default.

Remove leftovers for definitely unmaintained openSUSE 13.x images
and split into old/new leap style versioning scheme for clarity.

Change-Id: Iab129eeee2b1a2563f0f0d2cb17bbad57c068e38
2019-05-08 14:59:51 +00:00
Zuul
4665e79245 Merge "openssh-server: harden sshd config" 2019-05-07 19:35:42 +00:00
Paul Belanger
5d60979e93 Use fedora-release-common for fedora 30+
It looks like fedora-release on fedora 30+ has been split into sub
packages. Use fedora-release-common to avoid package conflicts.

Change-Id: I8f8711044fc4074b91939e0a6dfdac4d7a14a35b
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
2019-05-07 12:08:50 +00:00
Zuul
8c8b856c27 Merge "Only enable dbus-daemon for fedora-29 and below" 2019-05-07 05:47:57 +00:00
Paul Belanger
38d7574127 Only enable dbus-daemon for fedora-29 and below
In fedora-30 is when we migrate to dbus-broker, fedora-29 is still using
dbus-daemon.

Change-Id: I1e1d3a3826157b8b22386c211eaa58b6439b5f3c
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
2019-05-06 17:49:42 +10:00
Paul Belanger
daf5a4e4bd Switch simple-init to support python3
Depending on the version of $DIB_PYTHON_VERSION, we can either use pip /
pip3 to install glean.  This is helpful for newer OSes that might not
want to ship python2 (pip).

Change-Id: I25c5927a1eb55ee16b919dd64403184f335839b6
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
2019-05-02 19:38:16 -04:00
Tristan Cacqueray
11ec95b779 openssh-server: harden sshd config
Harden sshd configuration by adding KexAlgorithms, Ciphers and MACs for sshd,
following good pratices on https://infosec.mozilla.org/guidelines/openssh

Change-Id: I3051320d867a5033e82deef10c5e723ca9829884
Co-Authored-By: Nicolas Hicher <nhicher@redhat.com>
2019-05-01 11:42:21 -04:00
caoyuan
0329a6de5e Replace git.openstack.org URLs with opendev.org URLs
Change-Id: Iac5a9da62db84365a769ea07146281866215a9c5
2019-04-29 20:15:25 +10:00
Zuul
6a4bf78e0c Merge "Fix Fedora aarch64 image location" 2019-04-18 12:22:06 +00:00
Zuul
5b47dc3a5b Merge "debian-minimal buster support" 2019-04-18 08:32:47 +00:00
Zuul
2205741de6 Merge "Also use selinuxenabled to check selinux status" 2019-04-18 08:32:15 +00:00
Pedro Alvarez
f034dd00d9 Fix Fedora aarch64 image location
It used to be considered a 'secondary architecture' but that
is not the case anymore.

Change-Id: I8e5e9cfa915c8a3c979ff9db26477c0542d271db
2019-04-09 15:50:55 +00:00
Ian Wienand
105d201e1f debian-minimal buster support
Due to the referenced bug, many versions of debootstrap can't bring up
a buster environment.  Unfortunately, these include versions we use to
do this on Xenial/Bionic nodes.

Also, there isn't backports or security updates, so elide these for
now.

I did get a working build (I haven't gone so far as a full boot+glean)
with this, at least.

Change-Id: If2420e92cb728ab6e91b0d70547da4483679b391
Paritial-Bug: #1822927
2019-04-04 16:10:08 +11:00
Serena Ziviani
19cc00041a Also use selinuxenabled to check selinux status
Currently, the cleanup script is using the existence of the folder
/sys/fs/selinux to check if SELinux is enabled. This, however, is
misleading in case disk-image-builder is used inside a Docker
container on a selinux-enabled host. In this case, the folder exists
in the container but SELinux is disabled.

This patch addresses the problem by checking, in addition to the
check already in place, the output of the command selinuxenabled.

Change-Id: I83e58f2467e60df9f0f00f7b7a58d0e2ce357a9a
Closes-Bug: #1820077
2019-03-28 14:20:24 +01:00
Zuul
36b4bc87f9 Merge "Minor clarifications in centos7 element docs" 2019-03-28 03:50:52 +00:00
Ian Wienand
20c5c98426 Replace openstack.org git:// URLs with https://
This is a mechanically generated change to replace openstack.org
git:// URLs with https:// equivalents.

This is in aid of a planned future move of the git hosting
infrastructure to a self-hosted instance of gitea (https://gitea.io),
which does not support the git wire protocol at this stage.

This update should result in no functional change.

For more information see the thread at

 http://lists.openstack.org/pipermail/openstack-discuss/2019-March/003825.html

Change-Id: Id26bec14c3d94e2f81b2148fc85d17f07866398c
2019-03-22 01:35:42 +00:00
Daniel Abad
965d6f97aa Minor clarifications in centos7 element docs
Change-Id: I6aef77513efa37262269ca24b296acbdc823a039
2019-03-20 17:23:34 +01:00