Commit Graph

3533 Commits

Author SHA1 Message Date
Gregory Haynes
858fc3db30 Fix growroot device detection
We are incorrectly detecting major/minor device numbers for the growroot
rootfs. This can also be simplified by querying udev for partition
information.

Change-Id: I68059bf11f2563872f6b4d0e23fa09a15de980a8
2015-12-20 08:23:54 +00:00
Gregory Haynes
40799839e0 Package installs defaults to tracing off
There isn't a good reason we should be defaulting to trace on for these
scripts.

Change-Id: I1b9ac9388f51a49e6912d800914a0e0f2faec604
2015-12-20 00:03:51 +00:00
Gregory Haynes
6def86562a Don't print trace unless trace is on in pkg-map
The detection logic in pkg-map for DIB_DEBUG_TRACE assumes that this
variable being unset means tracing is on, when in fact this means
tracing is off.

Change-Id: I584a634c57bbe03e26a6ee94cef473e634616885
2015-12-19 23:50:15 +00:00
Jenkins
c8c14edfe3 Merge "Support building ACIs" 2015-12-18 13:53:38 +00:00
James Arendt
12cb94a75d Fix unmount/remove race in cleanup_build_dir
With a slow file system, umount can return 0 and the immediately
following remove can fail with a "Device or resource busy" error.
This happened in DevStack in disk-image-create where unmount_image
is followed by an immediate cleanup_build_dir.

Solution is to apply same logic from bug 1332521 to allow the
remove to retry on failure (up to 5s) in case the umount has not
completed.

Change-Id: I3337e2b4ad0111e77f79dc179439cdfea8ebdeda
Closes-Bug: #1527721
2015-12-17 20:55:02 -08:00
Gregory Haynes
0537563c27 Make check for image-should-fail quiet
We perform a check for this file after an image build fails to see if it
was intentional. This outputs a message which looks like the failure is
a result of the check when the file is missing which is very confusing
to users. Lets be more quiet about it.

Change-Id: I9b1f6c7c57021d11b4f91cd3c33846fae692b928
2015-12-17 02:31:41 +00:00
Abel Lopez
5e9c451d5f Document byte-to-inode ratio
End user docs would benefit from a section about the byte-to-inode
ratio, and why it's set the way it is. This update explains why
and how to manipulate the ratio depending on the intended use.

Change-Id: Iffb5ef6f4c7c74f4aa6e25912d4991d7a611c8fe
Closes-bug: 1512841
2015-12-16 13:58:17 -08:00
Jenkins
3a110bf96f Merge "Split vm and bootloader elements" 2015-12-16 16:22:56 +00:00
Jenkins
e6677afb8e Merge "Deprecated tox -downloadcache option removed" 2015-12-16 01:26:25 +00:00
Jenkins
a72d59c862 Merge "Fix fedora-minimal on CentOS builds" 2015-12-16 01:25:13 +00:00
Jenkins
134d38f74c Merge "Allow grub2 to build with opensuse" 2015-12-16 01:25:10 +00:00
Jenkins
d716893e30 Merge "Add dib-python element" 2015-12-15 23:24:25 +00:00
Yolanda Robla
c54b335fcc Split vm and bootloader elements
In order to add more flexibility to the vm and bootloader
elements, split the functionality in two different ones, and
make vm depend on bootloader element.
This will allow to construct more elements that depend on
bootloader, and develop both elements independently.

Change-Id: Iad2503b7b8fe53b768a3bc79e4cb839700fbd747
2015-12-15 20:49:03 +01:00
Ondřej Nový
b35f3a6c4b Deprecated tox -downloadcache option removed
Caching is enabled by default from pip version 6.0

More info:
https://testrun.org/tox/latest/config.html#confval-downloadcache=path
https://pip.pypa.io/en/stable/reference/pip_install/#caching

Change-Id: If624cea7246e0a16355923af122b2f8586718d5e
2015-12-11 22:58:50 +01:00
Jenkins
be5b669af1 Merge "Add a new element hpdsa" 2015-12-10 21:46:06 +00:00
Jenkins
3ebd0ba902 Merge "Follow up patch for 25d3ee547176528e86d42eb026c99a134dff9452" 2015-12-10 21:25:03 +00:00
Jenkins
aabf5b6ad7 Merge "Add proliant-tools element" 2015-12-10 21:24:27 +00:00
Nisha Agarwal
4509e6f826 Add a new element hpdsa
This element enables creation of Ubuntu deploy ramdisk and
user images which could be used to deploy the HP Proliant
Servers with Dynamic Smart Array Controllers. Without this driver
the disk with the Dynamic Smart Array Controller is
not visible to the ramdisk.

Closes bug: #1492803

Change-Id: Ibb3b298cd379cd7333279484df6ae30e9d7f6aaa
2015-12-10 20:12:14 +00:00
Gregory Haynes
3afbeeaf4e Add dib-python element
Creating an element which we can use in #! lines to refer to either
python2 or python3 depending on what it available.

Change-Id: Ic47e18ad21c33ab9f0d11c04260a33725aeee814
2015-12-10 19:39:38 +00:00
Robert Li
1b8a53ff3a Allow grub2 to build with opensuse
Specify grub2 in grub2 element pkg-map

Change-Id: Ia8bc1cbe11b35802f5c979ab4bb03e4e75077e83
Closes-Bug: #1519209
2015-12-10 17:29:52 +00:00
Jenkins
a95b96f57f Merge "Use ironic-agent for source-repositories" 2015-12-09 23:18:58 +00:00
Jenkins
da7b125fea Merge "Add kmod to package-installs of ironic-agent" 2015-12-09 16:22:23 +00:00
Dmitry Tantsur
901344ef7c Add kmod to package-installs of ironic-agent
The modprobe utility is required by the rtslib package (iSCSI Linux-IO).
It will also be required for inspection.

Change-Id: I6760c86160d1ceba45aedde62597a711bcb4543d
2015-12-09 14:27:21 +00:00
Jenkins
a9c8e6d55d Merge "Load the 8021q kernel module in simple-init" 2015-12-09 01:31:40 +00:00
Jenkins
93a54e32b9 Merge "Fix grub-efi-amd64-signed install failure" 2015-12-09 01:07:35 +00:00
Colleen Murphy
808e8f8bdc Load the 8021q kernel module in simple-init
Vlan support was recently added to glean. However, if the 8021q module
is not loaded, glean will fail to bring up a tagged interfaced defined
in /etc/network/interfaces.d/. Manually attempting to bring up the
interface results in an error[1]. This patch ensures that the 8021q
module is loaded so that tagged interfaces can be brought up at boot.

[1] http://paste.openstack.org/show/480027/

Change-Id: I15d805c07d4b5e1161d831f0393d027e4325137f
2015-12-08 12:59:06 -08:00
Paul Belanger
2be1bdc701 Add openssh-server package-install to local-config
Since we are modifing SSH keys, it should be safe to assume
openssh-server should be installed too.

Change-Id: I17ff05642bb2f0868d4c17819cd91b179068399a
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
2015-12-07 15:23:00 -05:00
Jane.zhang
7eb70becd3 Fix grub-efi-amd64-signed install failure
When build ubuntu iso image, it will install grub-efi-amd64-signed
and grub-efi-amd64 packages. Both of the postinst script will try
to find root device and install grub which will definitely fail in
such a chroot environment.
So the workaround is to skip error and remove postinst script.
And confirm the package be installed successfully at last.

Change-Id: Ie0aecb212b22362046db55b5ad8c64c3211c28e5
Closes-Bug: #1491280
Co-Authored-By: Jane.zhang <jian.zhang8@hpe.com>
2015-12-01 23:53:35 -08:00
Ian Wienand
ce781fbbc4 Fix fedora-minimal on CentOS builds
As described in the comments, CentOS overrides the "distroverpkg"
variable in yum.conf.  This is the package that yum queries to
establish the value of the $releasever variable.  On other platforms,
this defaults to "redhat-release" (which "fedora-release" provides) so
everything works.  It is only when the base-system "distroverpkg"
refers to a package not in the chroot we hit the issue.

We can avoid this by setting the releasever variable via the
commandline.

Change-Id: I231c3277960992cd479b8aff7838f246397936f2
2015-12-02 12:16:43 +11:00
Jenkins
3a3e4e4787 Merge "Add dynamic-login element" 2015-12-01 14:27:01 +00:00
Lucas Alvares Gomes
40197fa7f1 Follow up patch for 25d3ee5471
This patch is a follow up patch fixing some nits left by the review
25d3ee5471.

It does:

* Fix the README file to say that the password *must* be encrypted and
  the option values *must* be quoted

* Adds Type=oneshot in the upstart service config file so that upstart
  will not try to restart the service over and over.

* Enable setu, sete and setpipefail in the dynamic-login script

Change-Id: Iee5d75daef24469ccf47ca12de6ead37bf9d8d6f
2015-12-01 14:11:40 +00:00
OpenStack Proposal Bot
019ed49298 Updated from global requirements
Change-Id: Id7edb1f8838d093168eff50938ed26014f1bde27
2015-12-01 05:00:47 +00:00
Jenkins
403c37ba25 Merge "Add DIB_LOCAL_CONFIG_USERNAME to local-config" 2015-11-30 05:38:36 +00:00
Jenkins
0072628c5a Merge "Move install-types doc to user guide" 2015-11-25 17:45:23 +00:00
Gregory Haynes
6857452a62 Add centos7 test
We should test that centos7 builds work

Change-Id: I2c7a69c09f6bfa83eed7eabb1193acbe65f8b420
2015-11-25 17:35:29 +00:00
Paul Belanger
35b363698b Add DIB_LOCAL_CONFIG_USERNAME to local-config
Allow a user to override the username on where .ssh/authorized_keys is
installed.

Change-Id: I030d5a89260aed8b23a35c4cdc2d67629934b076
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
2015-11-24 10:42:14 -05:00
Dan Prince
d9dc8f1334 Use ironic-agent for source-repositories
I recently built a ramdisk for IPA and was confused by
the fact that the source-repositories name did not
match the element name. (this is a convention,
confusing when they don't match but certainly not
required).

This patch makes it so you can use DIB_REPOREF_ironic_agent to
customize the IPA ramdisk sources when building ramdisks.

For backwards compat if DIB_REPOREF_agent is set it automatically
sets the new DIB_REPOREF_ironic_agent to that value as well.

Change-Id: I082d989d0d85601f5984dc7c3767b8d66a3d5438
2015-11-22 15:03:31 -05:00
Lucas Alvares Gomes
25d3ee5471 Add dynamic-login element
Troubleshooting an image can be quite hard, specially if you can not get
a prompt you can enter commands to find out what went wrong. By default,
the images (specially ramdisks) doesn't have any SSH key or password for
any user. Of course one could use the ``devuser`` element to generate
an image with SSH keys and user/password in the image but that would be
a massive security hole and very it's discouraged to run in production
with a ramdisk like that.

This commit is adding a new element called dynamic-login, which inserts
a helper script into the image to allow operators to inject a SSH key
and/or change the root password dynamically when it boots via parameters
in the kernel command line.

Those parameters are:

sshkey = If the operator append sshkey="$PUBLIC_SSH_KEY" to the kernel
command line on boot, the helper script will append this key to the root
user authorized_keys.

rootpwd = If the operator append rootpwd="$ENCRYPTED_PASSWORD" to the
kernel command line on boot, the helper script will set the root password
to the one specified by this option. Note that this password should be
an encrypted password.

Change-Id: I6b87a1b90163d79745f30dfacd37516051fa0aea
2015-11-20 17:02:54 +00:00
Ian Wienand
1d476dd994 Remove fedora-minimal/install.d/99-ramdisk
When the kernel gets installed on Fedora, the rpm post scripts call
"/bin/kernel-install" [1] to install it.  This is a script provided by
systemd.

However, in [2], Fedora ships a patch to kernel-install that makes a
call-out to /sbin/new-kernel-pkg -- the install script provided by
grubby [3]

Without grubby installed, systemd's kernel-install script goes off and
runs dracut plugins directly [4], which eventually creates the initrd.
For reasons that are not clearly explained, the initrd will end up in
a a "machine-id" sub-directory of /boot (possibly, so you can symlink
it?).  It is also called "initrd", even though it's an initramfs, for
historical reasons in dracut I think.

It is at this point that I think 99-ramdisk has been written to move
the generated initrd file back into /boot.  Later on, when we build
the image, we run grub-install and it picks up the kernel and the
initrd and installs everything.

grubby's new-kernel-pkg [6] it's very similar -- it uses dracut to
make the initramfs ... but in this case it is put in /boot and is
actually called initramfs.

The subtle change that led me down this path is that dracut has been
modified to have a "Recommends" for grubby for >F22 [7].  After
discussing this change with the author, it turns out it was *always*
intended to use the grubby-based kernel install scripts for Fedora --
our builds have been incorrect in not including the package.  The
author got sick of people removing the package and making unbootable
systems, hence the change.

Thus this removes the workarounds in 99-ramdisk and replace it with an
install of the grubby package.  grubby's kernel install script will
put the kernel & generated initramfs in /boot, and it will be
installed correctly via the usual grub install later when we build the
disk image.

I have built F22 & F23 fedora-minimal images with this and they boot.

[1] http://pkgs.fedoraproject.org/cgit/kernel.git/tree/kernel.spec#n1832
[2] http://pkgs.fedoraproject.org/cgit/systemd.git/tree/kernel-install-grubby.patch
[3] http://linux.die.net/man/8/new-kernel-pkg
[4] https://github.com/haraldh/dracut/blob/master/50-dracut.install
[5] 81516adcb7
[6] https://github.com/rhinstaller/grubby/blob/master/new-kernel-pkg
[7] 47ff68e78b

Change-Id: I1a6e45d04755515286b3d49f8280c16b527e2f48
2015-11-19 21:03:45 +11:00
Gregory Haynes
e23b087505 Remove cloud-initramfs-growroot package
This package seems to be broken and isnt useful for recent releases
(where the rootfs can be resized online). Therefore this should be
optional so people can use things like the growroot element.

Change-Id: I6e3c8d095d9fc188094f3b8811f06be0847ef08c
2015-11-17 23:00:17 +00:00
Lucas Alvares Gomes
ff988ac45c Extend root device hints for different types of WWN
This patch is extending the root device hints to also look at
ID_WWN_WITH_EXTENSION and ID_WWN_VENDOR_EXTENSION from udev.

Prior to this patch the bash ramdisk only cared about ID_WWN but in some
systems in some platforms with a RAID controller, this ID can be same
even if they are different disks (see bug 1516641).

Related-Bug: #1516641
Change-Id: I45b3910d03d164d880b32169b91e94e88812e183
2015-11-17 22:42:44 +00:00
Gregory Haynes
930b597220 Move install-types doc to user guide
Install-types are a user facing feature, not just for developers. Lets
move the docs on them in to the user guide.

Change-Id: I6ee8f657c270cf90da9c0729494740bb23aa47c5
2015-11-13 18:45:28 +00:00
Jenkins
2ff566b80a Merge "Selectively prune /root for ironic-agent ramdisk" 2015-11-13 03:28:13 +00:00
Jenkins
5e571d9f44 Merge "Fixup RPM db path when building Fedora on Ubuntu" 2015-11-10 11:03:22 +00:00
Ian Wienand
3f3850aa0f Fixup RPM db path when building Fedora on Ubuntu
On Debian/Ubuntu installs of RPM, /usr/lib/rpm/macros sets

  %_dbpath  %(echo $HOME/.rpmdb)

which makes quite a bit of sense, because RPM is not the system
packager and thus RPM is setup to install things into a hierarchy in
the users homedir.

However, this messes things up when building a Fedora chroot on an
Ubuntu platform.

We use RPM & yum from the base-system to bootstrap the Fedora chroot.
While both obey --root flags, they still pick up the %_dbpath macro
and so end up creating the RPM database in <chroot>/home/user/.rpmdb

After we have bootstrapped yum/dnf, we execute further installation
commands from inside the chroot -- where we now have the Fedora
version of /usr/lib/rpm/macros and hence have _dbpath set to
/var/lib/rpm -- except there is no rpm database there.

Should anyone be finding this in the future, the actual issue that
appears is

  $ sudo chroot /opt/dib_tmp/image.b6B5S3f6/mnt dnf makecache
   Error: Failed to synchronize cache for repo 'fedora' from \
    'https://mirrors.fedoraproject.org/metalink?repo=fedora-$releasever&arch=x86_64': \
    Cannot prepare internal mirrorlist: file "repomd.xml" was not found in metalink

Note the issue there is that $releasever is not expanded, because the
rpmdb where this info is kept is not populated.

The trick is to make sure we override this value when using the host
rpm/yum to setup the chroot.  The bare rpm calls, which we use to
install the repos, have a --dbpath argument where we can override
this.  yum does not however, so we override this in the global
~/.rpmmacros while we are installing the packaging tools and
dependencies into the chroot.

Copious comments are included, because this is super-confusing.

Change-Id: I20801150ea02d1c64f118eb969fb2aec473476f7
2015-11-10 08:54:44 +00:00
Ian Wienand
8ee21cb9fd Remove unused RELEASE_RPMS variable
It was noticed during reviews of
Ic7aa8cbe13e4347b447e84bb9c12483a4e125228 these are unused

Change-Id: I9e0fa9d3e4864e54c6fe23f8b6e781e8d5d24bda
2015-11-10 07:17:52 +00:00
Jenkins
e90be5a595 Merge "Fix fedora-minimal kernel-install on older platforms" 2015-11-10 05:14:28 +00:00
Jenkins
6f21f47850 Merge "Clarify what fedora-minimal/install.d/99-ramdisk is doing" 2015-11-10 05:14:25 +00:00
Jenkins
3412ced2f0 Merge "dib-lint: ignore blank lines in element ordering" 2015-11-10 00:32:04 +00:00
Jenkins
484341c5ab Merge "Fix diskimage-builder image size" 2015-11-09 19:41:54 +00:00