When building the image on a non-efi environment, it generates
linux16/initrd16 entries. But to boot from UEFI they need to have
linuxefi/initrdefi entries.
Use sed to replace those entries, in case we have an EFI image.
Change-Id: I47c96450e10f34b91bcc32888532bd7ab87cf316
setfiles isn't supported on the vfat /boot/efi partition. Add it to
the skip list.
Tested on Fujitsu Server successfully.
Change-Id: Iab262c4bdb0ecc25ca6b77ee4aff1ce442c0c578
This patch adds an element that handles the configuration for
creating a disk capable of being a remote root filesystem through
iSCSI on Ubuntu and Debian images.
Change-Id: Ibf9e39d2bdab530106015f156d23d28029d12b0d
Closes-bug: #1716794
When using uefi in rhel, the package mapping is incorrect.
We need to add specific grub-efi* mappings to use grub2-efi
Change-Id: I2db96ae85fd5e4638c794015b2f8164c018420e3
We need to handle openSUSE Leap 15 when installing pip and virtualenv
packages. This fixes the following problem when the pip-and-virtualenv
elements is used:
2018-05-31 09:42:12.014 | + [[ opensuse = opensuse ]]
2018-05-31 09:42:12.014 | /tmp/in_target.d/install.d/04-install-pip: line 57: packages: unbound variable
Change-Id: Id7911b0a0836fa8dcc003e23fa515b78fba67126
Redirecting our output through outfilter.py is inherently a bit racy,
since the disk-image-create process will exit, and then you might get
outfilter.py flushing any remaining output as it closes.
On an interactive prompt this might lead to final output overwriting
the prompt, etc. This can be a bit confusing when you start running
things in a loop.
If we save the original fd, then on the exit path close the redirected
fd's and wait a little bit for final output (as a result of the
close), we get a more consistent output.
Change-Id: I8efe57ab421c1941e99bdecab62c6e21a87e4584
Strip everything before "site-packages" in the output filename for the
PS4 prompt. This makes the line in debug logs significantly shorter
as we don't have the full virtualenv path every single time. The
important thing -- the file being called in the lib/ dir, is retained.
Change-Id: I00706b6f6c0425c7795f997c08ceda3374dc84b5
When switching to using log-file capture, we're getting
[gentoo/build-succeeds] outfile.write(ts_line.encode('utf-8'))
[gentoo/build-succeeds] UnicodeEncodeError: 'utf-8' codec can't
encode character 'udcc5' in position 59: surrogates not allowed
Use surrogateescape [1] on the output to avoid this
[1] https://www.python.org/dev/peps/pep-0383/
Change-Id: I2c2c537296edfa5a8fe661a41bd5bfb3bfcf57e3
Patch allows to rebuild arbitrary images, which location, filename and
sha256sum are specified in variables, not only hardcoded $DIB_RELEASE/current.
Change-Id: I05418932a0c40d885fe00a49f1f49d7e86c67518
Add a bionic test in replacement of trusty. We are already building
bionic images in the gate, so this seems like a good time to switch.
Change-Id: I20d4c25e9b79e7326c86767c36be8615ba0888a3
Removing no longer working and no longer maintained ubuntu-core element, which
intent is unclear, and not documented.
Change-Id: Id847591d04fd7cd32c8903967da01ee0d303b267
Closes-Bug: 1771614
Without this change DIB appends a second command line entry to the GRUB
config. This causes the original command line entry to be ignored
when Linux is booted.
The expected behaviour is that DIB appends to the existing entry as
it does for Ubuntu and SUSE.
Following discussion on the review, this also removes the distro specific
switch statement, as update-grub just calls grub-mkconfig, meaning that
there was nothing distro specific in the first place.
Change-Id: I2298675dda1f699c572b3423e7274bc8bd7c1c9d
Closes-Bug: #1771366
Since CentOS-7.5, a new yum variable is needed for SIG repositories.
This change replicates the %post task of the centos-release package
to setup the contentdir yum var. This should fix issues when
repository url uses $contentdir and yum fail with:
http://mirror.centos.org/%24contentdir ... [Errno 14] HTTP Error 404 - Not Found
For more details see:
https://lists.centos.org/pipermail/centos-devel/2018-March/016542.html
This change also drops support for fedora without dnf.
Change-Id: I1819a48b94670577b0c5e29b24cebfb20ea07d28
This commit addresses the issue described in bug 1768354 when using the
apt-sources element and adding a key to a custom repo, subsequent deb
package installs fail due no update of the repo before package install
Change-Id: I968b3422fab2fb2305426d49215391d8ba7499df
Closes-Bug: 1768354
The pip-and-virtualenv element provides pip inside the created images.
When this pip is used inside the chroot of the image it, by default, creates
a cache directory with the http packages and the resulting wheels.
In the case of the octavia ubuntu-minimal image this cache is using ~50MB of
cache that is not needed after the image finished building.
This package creates a finalise.d task that removes the cache from the
default location.
Change-Id: I4715437b068d04993ef755bd1e27963db1d22417
When RDO projects repository is installed, the python-setuptools
package is obsoleted by python2-setuptools, this makes the install-pip
script failed:
Package python-setuptools-0.9.8-7.el7.noarch is obsoleted by
python2-setuptools-22.0.5-1.el7.noarch which is already installed
Then the "rpm -ql python-setuptools | xargs rm -rf" exit 1. Check if
we have a record of the updated package obsoleting then old one; if
so, use it.
Change-Id: I2b0051bd9e81908c187098a7b82e120b999b111d
We no longer install wget / yum-utils for centos-minimal, this fixes
that.
Change-Id: I8d89026bd48cf7398cc1cbe41e3b7f00f682dbb8
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
This currently breaks glean on rackspace, revert until we can figure
out why that is.
This reverts commit 43bc352c59.
Change-Id: Iae88a3b0457bab0b8f0fd1febf58732ca95e5dc9
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
The release of pip10 has shown up a few issues here
Firstly, pip10 now refuses to overwrite distutils installed packages,
which includes "python-virtualenv" on centos. History has shown us
that we want the packages installed and overwritten, to avoid the
packages coming back and messing things up.
Pre-install all the packages, then list the files in the packages with
"rpm" directly and remove them. This way pip is happy to install.
We need to take better account of the package names for this; on
Fedora things have switch to "python2-virtualenv" instead of
"python-virtualenv" and we can't use an alias to list the package
contents.
This also highlighted that python2-pip is in EPEL for centos, so
enable that when we install it. Make the epel element a no-op for non
centos/rhe distros.
There is a related change in recent fedora that python3 now installs
binaries into /usr/local/bin. There are commented swizzles in here to
ensure we retain the status quo of "pip" and "virtualenv" both being
python2 based, with the python3 versions being called explicitly
"pip3" and "virtualenv3" respectively.
Change-Id: I2ffdd9f615ae6b00428c17249e4f216774991b99
We added this sed in I422490ebe9a9c655552685bc2ff342d288335a9c to
avoid installing python2 packages on python3-only systems and thus
dragging in all of python2.
We made a similar change to python-pip in
I7d8ba9300039cce90965410a4e16ca9e711904c3; however we realised that
the gate (and other consumers) were relying on this element having
installed the python2 & 3 packages for consistency -- otherwise jobs
would install the python-pip packages and overwrite the
pip-from-source and mess everything up. We reverted that in
I419dbdf4682394db68974944af1e5c432f3e0565 and added some clearer notes
that this element brings in python2 & 3, and if you want something
that doesn't do that then this element isn't for you.
However, we never fixed up the virtualenv package install -- currently
our Xenial images have a global virtualenv installed from source, but
the python-virtualenv packages aren't installed. Thus if a job does
"apt-get install python-virtualenv" it overwrites the from-source
virtualenv with older parts and again messes everything up.
Probably most jobs just call "virtualenv" and assume it is there;
however in bringing up some rspec test for puppet I have hit this
issue as some modules specify dependencies on the virtualenv packages.
Thus install the python-virtualenv AND python3-virtualenv packages in
this element.
Change-Id: Ia84c38dc3c40a6080e144b563e10abca7dac2881
The behavior of test -e and [[ -e against broken symlinks is to fail
even if the symlink exists. However we want to test if the link exists
or if there is a file in that location. Therefore switch from test -e to
test -L and test -f to check if the file or link exists regardless of
link target validity.
Change-Id: I84a9b6731eccf950707be50aef464a2de1e33e8e
On initial boot when networking is brought up by cloud-init this
is the timeout that dhclient adheres to. Centos configures
"timeout 300" (for an EC2 bug) in their cloud image, which results
in a 5 minutes delay to boot in cases where no dhcp available (e.g. IPv6
SLAAC). To reduce this boot delay and to provide consistency with
places where we have set other dhcp timeouts set this to DIB_DHCP_TIMEOUT.
Change-Id: I119a002070501c3dfe7c6730b07ee25f422b85b0
Related-Bug: #1758324
systemd-resolved has a new behaviour in bionic, in that if there is no
/etc/resolv.conf file when it installs, it assumes it is a fresh
system and makes /etc/resolf.conf a symlink into its compatability
files.
dib ends up saving & restoring whatever /etc/resolv.conf we have after
the inital chroot creation, which may not be what we want -- in the
above case it restores the system-resolved symlink. For
openstack-infra, we use unbound and want simply "127.0.0.1" in a
/etc/resolv.conf file [1].
Formalise the ability to save specific contents into the final image.
Add documentation, and a note in the code that it's an external
interface.
I would have preferred to namespace the .ORIG file with DIB_ or
similar, but this unofficial interface has already escaped into the
wild. Leave it as is for simplicity.
[1] Note that systemd-resolved will obey /etc/resolv.conf as you would
expect, if file exists.
Change-Id: Ie0e97d8072e2b21a54b053fa6fb07b62960c686d
We exit in several places and don't restore tracing. Previously in
nodepool we relied on the default fallback, which did restore the
tracing. Since we now use the MBR config file, we take the different
exit path without it and the debugging output is incomplete.
Change-Id: I586fc95517926025705ce376ec5c4aaf4122773f
Many elements install additional distribution packages.
In addition the user can provide a set of packages to be installed
via the '-p' switch.
Some of them influence the boot process and therefore the initramfs
needs to be updated. Because the package manager during the image
creation process is configured not to run package scripts, this needs
to be done explicitly.
This issue was found during development and debugging of the
block-device LVM plugin: Even when the e.g. the lvm2 package
was installed in the image, it was missing in the initramfs
because of the missing update.
Change-Id: I7c92033b3ca80cdd23d081002059d83ca3f53bdb
Signed-off-by: Andreas Florath <andreas@florath.net>
Default the GENTOO_PORTAGE_CLEANUP to True. By default we should not
ship package info, this bloats the image and is usually outdated by the
time it'd be consumed.
Change-Id: I14c2530d91807cbc6a3806e01c7e4f6f472b190d
The debian element depends on debian-minimal now which provides
operating-system. This means that the debian element can no longer
provide operating-system and doing so results in an error when using the
debian element.
The fix is simple just rely on the fact that debian-minimal provides
operating-system and remove this element-provides from debian.
Fixes-Bug: 1758000
Change-Id: I524feeb82c19046ec987eb1186c7f4568309e559
