After writing the basearch value to /etc/dnf/vars/basearch the
arch value was overwriting the same file. This appears to be
incorrect, so changing it to write /etc/dnf/vars/arch, which
matches the subsequent 'yum' code paths.
Change-Id: I5da54f03224c11f9e286f16b68533936c4174c2a
Add some checks for AArch64 to avoid the "Unknown architecture" or
"architecture not supported" messages, and allow builds to complete.
Change-Id: I89ba609abaeeb7019eb317cf13473929b2065230
This change was made for pre-install so it applies during the
image build, but wasn't applied to the os-refresh-config script
that would run after deployment. The same problems apply there,
so we should do the same thing.
Change-Id: I4b8534cc9586eeb588b5c358550e76e27d40556a
Closes-Bug: 1629922
for fedora/rhel/centos the main supported ARCH is x86_64. This patch allow
to call diskimage-builder with the above distro's with param ARCH=x86_64,
And also retain same behaiver when call with ARCH=amd64 as it translate
anyway to x86_64. Doing so wil simplify user expirience.
Change-Id: I229e0912434109b1b48a030bd35ad8dc1096a629
Without the dialog package is not possible
to properly use an interactive frontend.
debconf will print the following errors:
debconf: unable to initialize frontend: Dialog
debconf: (No usable dialog-like program is installed,
so the dialog based frontend cannot be used. at
/usr/share/perl5/Debconf/FrontEnd/Dialog.pm line 76, <> line 1.)
Change-Id: I0c7142f717cacf7437dbac1e1696f39b00cb4c49
We have a pkg-map entry for lsb_release, but in package-installs.yaml
we refer to the actual package name instead. This will happen to
work on Red Hat platforms, but it's actually wrong.
Change-Id: Idb248f96e75fa1090422fa08e5fbb2385cc1f517
yumdownloader has to have all the repo XML files, etc, which adds up
to a not totally insignificant 150MiB or so. Currently we're leaking
this directory for every build, which adds up on regualar builders
like nodepool.
Isolate the call with a separate TMPDIR so we can clean it up after
the initial download.
Change-Id: Ic65e8ca837cc76b7a1bb9f83027b4a5bdd270f75
while using disk-image-builder for building overcloud images for TripleO
using RDO, this repository is (in my opinion) wrongly disabled because
contains certain dependencies needed by RDO packages.
Example: python-cheetah is required for python-nova, but is not
available through RDO repository but only from
rhel-7-server-rh-common-rpms
Closes-Bug: #1638938
Change-Id: I76824c8ec02590397f1ff1d4f177ad061c7bf441
Signed-off-by: Luca Lorenzetto <lorenzetto.luca@gmail.com>
Mount all the usual /dev /sys /proc pseudo filesystems during the
root.d phase in order to make sure they are available for the rpm
post-installation phases.
Change-Id: I28221debf1036d9eb5137161757eb30811eafab1
On Centos and RHEL 6 the init system is upsart but but networking is using
sysv compatabiliy and a code path the handle this situation.
We can't use DISTRO_NAME because the centos-minimal element sets it to
centos for CentOS 7 but the centos element sets it to centos for CentOS 6.
Change-Id: Ib8e33ed78b3d6a5737eb7449bccef2d33f72b131
Closes-Bug: #1638527
The refresh operation must happen after the cache has been added in
order to ensure that whatever is in the cache is still relevant to
the current build and we are not using stale packages.
Change-Id: Iafd718e9738f85b8c235806c027665730f44d89b
Closes-Bug: 1589450
Load the vfat driver as a Pre Exec action for systemd before starting
ironic-python-agent in order to allow reading of parameters.txt file
required for the ironic-python-agent to find its configuration.
Change-Id: Ibf74dd1b2678ea76e0676711a7aa5ba6b88d5421
AFAICT this is no longer necessary. I've tested minimal and image
builds and they seem to work.
The original problem seems to be with installing the package in the
chroot, although it was never quite clear it ever affected the Red Hat
path.
This code is currently broken (see
I884cb1e78ad8c31d985f3fc94a58091b993edd7d). This is proposed as an
alternative to I74eed074494134334d5e49042bb5214bd0dd7339.
Related-Bug: #1627000
Change-Id: Iafe3611f4eec3c6357587a6cae6a30a261686ead
Recommended packages are usually useful but we normally don't need
them in order to have a working system. As a result, avoid pulling
them in when doing a regular package installation or a distribution
update. Extra packages can be pulled in using the usual '-p' parameter
or from within the elements that actually need them. The results of
this change are quite significant, resulting to gains from a few dozen
of MBs up to a few hundred depending on the selected elements.
Change-Id: I5838829c631990c7a1f3b67548accd9a603fe20c
When debugging, this is very noisy for very little value. If we need
to specifically debug this script we can turn up the level.
Change-Id: Ie15f16397c37e718aa919853697cbf2c5c08503c
Because environment files are sourced into the current environment,
they shouldn't be setting global settings like tracing else they
affect every preceeding import. This is quite confusing when only
half your imports are traced in the logs, because it was either turned
on, or off, by a preceeding environment import.
There is a corresponding dib-run-parts change in
I29f7df1514aeb988222d1094e8269eddb485c2a0 that will greatly increase
debugability for environment files by deliberately logging what files
are sourced and consistently turning on tracing around their import.
This isn't strictly necessary (since dib-run-parts with the prior
change will just turn tracing off after import anyway) but it's a
decent cleanup for consistency. A bare-minimum dib-lint check is
added. Documentation is updated.
Change-Id: I10f68be0642835a04af7e5a2bc101502f61e5357
We are running into race conditions with glean, which ssh-keygen -A is
not handling properly. So, create a new script to first check if the
file exists, then use 'yes' to disable overwriting of existing files.
Change-Id: Ie82e1e3f832fcc8f32c7e1335c5f0ee16d36f9a8
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
Theres a pretty standard workflow for setting a sysctl value which will
be applied on image boot which was written by tripleo. Lets move this in
tree as other folks (like Octavia) would like to depend on it.
Change-Id: I3c266870d417cdba3196f5fa65c4cd634ab13173
cloud-init-local needs to be run in the boot runlevel because it
modifies services in the default runlevel. When a runlevel is started
it is cached, so modifications that happen to the current runlevel while
you are in it are not acted upon.
Change-Id: Ifeae0071fc9e738ec223ec0df271559ad6e0196b
Add a new opensuse-minimal element to build small and highly
configurable openSUSE based images using the zypper-minimal element
as the main building mechanism
Change-Id: Iebfc4ad4aff763e511b093f1607b55851ccbddcb
All SUSE-based elements can benefit from the mkinitrd phase to move it
to a more generic location.
Change-Id: Ife171d462a393b6ac0bf2c5eaa48ea25eaf4d1cc
Since http://httpredir.debian.org is unreliable is selecting a mirror
to use, we'll now default to http://ftp.us.debian.org/debian. In
fact, in openstack-infra we have been overriding httpredir.debian.org
for a while, now make this default in diskimage-builder.
Change-Id: I48658bc076e13a0913821197e4120c73618fef8f
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
Move the opensuse utilities to the zypper element so they can be used by
SUSE or zypper based elements. This brings the zypper element somewhat
in line with the rest of the package manager elements.
Change-Id: I8aa2849231454216cdd47629a5e2d6e45769dbbe
Depending on the pool id used, so many repos are brought,
including not valid ones that cause image to crash, or repos
that include conflicting packages.
Before enabling repos, disable all previous ones, so we
can be sure that we only bring the repos specified in the
parameters.
Change-Id: Ifd4d8d1d4fa954cd2593669e516e3201f2d6f6c1
Move managing of SSH host keys into a dedicated element.
Because glean doesn't generate SSH host keys anymore, we need to do it
with a systemd script. This is already handled by CentOS / Fedora so
we don't want to add it there.
This was done to address the upstream bug in debian:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=500192
Change-Id: I31ad667672e08350872db21a83445fe0aa7a4a39
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
Grub is first removed and then installed during RHEL image building. The
grub2 package typically requires the same version of grub2-tools, so if
we just remove and install the grub2 package, the installation can
potentially fail on being out of sync with grub2-tools version. Removing
and reinstalling both packages fixes this issue. Those packages are
already in package map for RHEL as "grub-pc", so we can use this alias.
Change-Id: Iefd9c17fffd43de3fea260510ad218b1322eecb3
Closes-Bug: #1627000
We are currently wasting about 10 minutes per deploy waiting for
DHCP on interfaces that will never get it. By default, the timeout
seems to be 5 minutes (the 10 minutes is because we boot both the
IPA ramdisk and the deployed image, and each waits for 5 minutes),
which is excessively long to get a DHCP response. This change
shortens the time to 30 seconds. If an interface hasn't gotten a
response in 30 seconds, chances are it's not going to. A 30
second wait should reduce our wasted time to 1 minute, which is
more reasonable.
This is being done in the systemd unit file because the -timeout
option to dhclient doesn't seem to override what is configured in
dhclient.conf, and doing it in the systemd file means that this
change will be limited to only the interfaces configured by
dhcp-all-interfaces.
Change-Id: Ia8610e3def39c937eb0c861fdc9bc571ec39f9f4
Closes-Bug: 1626673
Because we are using the building platform's "yum" to do the initial
install into the chroot, it is affected by the base-system's
/etc/yum.conf.
pip-and-virtaulenv in I82acb865378a0fa5903a6267bfcee0e2962eced0 added
"exclude=python-pip..." in /etc/yum.conf to stop the package manager
overwriting the installed pip. Now our CI images have built with
this, we are now picking up this exclude on centos. Since on F24
dnf->python->python-pip we end up failing to build the the chroot
because python-pip can not be satisifed. In a general sense, however,
this could be caused by any configuration put into /etc/yum.conf that
is incompatible with installing into the chroot.
yum has the option to disable all excludes which is used here. This
seems to be the best way to isolate the chroot install from any
excludes that may have been done on the base system for various
reasons. I did consider using a completely separate yum.conf we ship
with dib ... but let's start simple.
This should fix the current gate failures on centos
Change-Id: I4e4cc8ed09a29c4057ade34ea93025139e191bf5
yum-minimal installs selinux but not libselinux-python, which makes
interacting with the node from ansible hard fail. Add it.
Change-Id: I403e7806ae10d5dd96d0727832f4da20e34b94c7
Add support for new openSUSE Leap releases. Moreover, document
common environment variables and remove old note.
Change-Id: I8cf0b215cb4d9231e5658d49e3fd598dfbb5fd37
The previous commit removes dkms from the base element, which
means the centos elements should no longer have a dependency on
EPEL. Therefore, we should not hardcode the epel dependency. It
can still be included in image builds as desired by using the epel
element explicitly.
Co-Authored-By: Ben Nemec <bnemec@redhat.com>
Change-Id: Iceff0d5bedd9816adfd2990970e7c216b67b6bd0
The use of dkms in base was actually removed long ago in
Ic2c345bf9f0738dadae611194e263d3a5d424a3e and it is creating an
unnecessary dependency on EPEL for the centos elements.
Change-Id: Iae3100471e50a9c39f40b450f087192918ae54b3
This fix add need kernel module for Infiniband and ConnectX-4+ network
cards.
Also install by default required user space packages.
Change-Id: Ia2e7b1820f197778138a23fafaccb5a4fb44369a
On systemd-based operating systems that don't
use /etc/sysconfig/network-scripts
dhcp-all-interfaces configures 'lo' for dhcp.
This causes errors and fails networking.target
causing system-wide issues. This change excludes
'lo' at dhcp-all-interfaces udev rules level.
Closes-bug: #1621501
Change-Id: I7563b766827bedbea7ae1de35e5bdfcbf1fc0d1e
Co-Authored-By: Jeremy Stanley <fungi@yuggoth.org>
Dependency to start network-pre (which
depends on network.target) before
dhcp-interface@.service collides with
Ubuntu's own network.target that suupose
to start after network-pre.
Change-Id: I9e59c970bfb1ebdaa15b4ec6b545761ede3ca056
Closes-bug: #1619816
It is possible and often desired to install glean from a source
repository when using the simple-init element. Document the process for
doing this.
Change-Id: Ie7c690406b14aae07d73261879b7ce8a2ed9dd8d
IPv6 privacy extensions can cause issues by preferring a temporary
network over a public one. This preference may limit connectivity
in certain situations. An example of a connectivity issue can be
seen where the command ``traceroute6`` fails or misses all hops
while other traffic to a given domain with a "AAAA" record may
succeed. To resolve this issue the IPv6 privacy extensions have
been disabled.
Change-Id: I62b9d6301b9e8b8e93b49cecbc96334ceea92fa5
Related-Bug: #1068756
Signed-off-by: Kevin Carter <kevin.carter@rackspace.com>
Currently, ironic-python-agent is installed without using an
upper-constraints.txt file.
This commits ensures ironic-python-agent is installed using
upper-constraints.
Change-Id: I6be6cfc012941e2cc9996717cba39b5415b85e14
Closes-Bug: #1616554
Explain difference between 'DIB_OFFLINE' and
'DIB_DEBIAN_USE_DEBOOTSTRAP_CACHE'
Those variables are not redundant,they hava different effective ranges.
However,some people may be confused about this and reported a bug.
So,this difference should be writen in the README file.
Closes-Bug: #1506275
Change-Id: Ie5316de41d129bf98781708954f09ef0b2592b53
Currently we update portage whenever we could need it. Instead we
should update portage only if we actually need to. This update adds a
check to do so.
Change-Id: Ifdb27fd844b0b3a169ced945ac7ee0ddc235e9ec
Gentoo has updated it's grub ebuild to default to the upstream
recommended installation parameter of grub-mkconfig instead of our
default multislot installation of grub2-mkconfig. Update the command
line parameter so that it works with both.
Change-Id: I359b44338a4f76af7c026f5cad212e6dc3dbf2b3
It's possible this is run form an environment where $USER isn't set,
properly fallback to whoami in this case.
Change-Id: I1181f714c3c456ee264b34d282bac5c0adb67a0e
Even though this file ends up in the /tmp directory, for readability
it's good to point out that server.pem is not necessarily the
certificate for a server, but can be a CA certificate which is
trusted if this option is used.
Change-Id: Iea27a702a844456e4472957438f75ed3819d62ca
For some use cases, it can be useful to keep all the kernels
and not just keep the latest one. Add a parameter that allows
it, and continue cleaning up kernels by default.
Change-Id: Ia6e6c1fa18e3724c1eb89226151d81e9e748b793
