Ubuntu 12.04 LTS reached its regular End of Life on April 28, 2017.
Depends-On: I5e145095a10db112bb27516bfe652d2cdc052a61
Change-Id: I64af4c5183d77a75dcd062895d19b0a1330c8da8
On SUSE family distros the squash-tools are simply part of the
main package called "squashfs", so install that one instead. Without
this change bindep on SUSE hosts fails with:
ERROR: These requested packages were not installed:
squashfs-tools
Also adjust install_test_deps.sh to install required packages
on an openSUSE host.
Change-Id: I61dcd5314e78dbb1fb31e723799374edd456da99
Currently openSUSE 42.3 has entered feature freeze mode
so it is a good point in time to verify that 42.3 builds
are working successfully. Also test opensuse-minimal for
platforms that support it (need working zypper package)
Change-Id: I4c613e1e68cb7375c29d544bbf70b5da9bf21414
I think this has gone missing on test nodes during unpuppeting. Add,
as the gentoo job grabs some bz2 tarballs for extraction.
Change-Id: Icb82930702124f7bf112b03a469d90d4163d398b
If the path is missing, unmount_dir currently exits with an error which
unintentionally aborts cleanup efforts early. This change makes
unmount_dir idempotent by exiting successfully if a directory doesn't
exist.
Change-Id: I1491b4344e8569ecb2833f44baee445a89a39d61
We somewhat discussed skipping qcow2 generation previously in
I9372e195913798a851c96e62eee89029e067baa1. As recent issues with PPC
testing have shown, we are not actually testing the "vm" element and
hence the bootloader path in the functional tests.
I don't think we need to test this on every element; it overlaps
somewhat with the testing done by the nodepool jobs which build full
images and boot them. I also didn't want to introduce a separate run
for this. Thus it seems valuable to at least have one element
enhanced to do this installation and conversion in our default tests
for basic sanity.
This disables qcow generation by default, as per the other change, but
allows an element to drop a file that will override the output
formats. The Xenial element is modified to produce a qcow2 using
this, and also introduces a dependency on the "vm" element so it tries
to install the bootloader.
We now exit if the .qcow2 fails to build as well.
Change-Id: I1a6acefe52f8c696c39b2d592fdc7ae32a87e6fe
Change ec7f56c1b2 add added unit tests
in diskimage_builder/tests/functional (this is probably misnamed).
These are found and run by testr just as part of the normal "setup.py
test" run. Don't run them as part of the functional tests (this
breaks "-h"/"-l" because it installs a virtualenv and runs tests, and
also is incorrect in the gate where it's creating a nested virtualenv
underneath the testing virtualenv).
Change-Id: I9908e080042d3026a198ba89eb653c6eff376d22
During the creation of a disk image (e.g. for a VM), there is the need
to create, setup, configure and afterwards detach some kind of storage
where the newly installed OS can be copied to or directly installed
in.
This patch implements partitioning handling.
Change-Id: I0ca6a4ae3a2684d473b44e5f332ee4225ee30f8c
Signed-off-by: Andreas Florath <andreas@florath.net>
DIB automatically includes it's base elements in the ELEMENT_PATH;
this double-set means the base elements are in the path twice, leading
to some tools that walk the element list (package-installs-squash, for
example) to do things twice.
Change-Id: Icf631427601cfd2abed436711cedb9e002fff8f9
Because we run this image in openstack-infra, we want to increase our
test coverage to help avoid potential breaks to our CI systems.
Change-Id: I26405e3f7465654075278ec35b5e0da1338bb45e
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
Since we still run these 3 version of ubuntu-minimal elements in
openstack-infra, also run functional testing for them.
Trusty and xenial will be in voting gate, precise added as skipped for
non-voting.
Add the default skip/run status to the "-l" output just to confirm
this too.
Change-Id: Icfbfd0cb7d9acae824972474b77e2fe0486c4f69
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
The squashfs format brings a couple of advantages over the other
formats. Image is often an order of magnitude smaller and it can
be used natively, either as an initrd, either with loop mount.
Change-Id: If72940b0c4dafb2504c52dd0429a8eb3f8305751
We now support tgz (tar.gz) as an output format.
Change-Id: Iadec92f2f96c3f904f28bd49f87ffc7d48ef7bd7
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
openSUSE 13.1 was discontinued on Feb 3rd, 2016, so defaulting
to it doesn't make sense (see https://en.opensuse.org/Lifetime).
Leap 42.2 is the most current release that is supported by
disk-image-builder and being tested in a 3rd party ci.
Enable functests for it to ensure we're not regressing again.
Moved to non-voting gate first.
Depends-On: Iff495b3cd0b6c3558c44cf4883651eca67b572d6
Change-Id: Iae6cd34a5853f1e309861c554d94d8595cbd9993
Centos6 is no longer reasonable to expect to function with openstack,
and infra does not host a mirror for it.
Change-Id: I95ccf5840807fee73d6e78d596c82709e476bb3a
It has always been a weird thing that dib is a python package, but
is totally driven by the disk-image-create script. It creates this
strange division that is hard to explain.
This moves disk-image-create to a regular python entry-point
Currently, this simply exec()s the original disk-image-create script.
However, we now have a (private) interface between disk-image-create
written in python and the driver shell script. Here's some things we
could do, for example:
* Argument parsing is generally nicer in Python, and then end result
is mostly just setting environment variables to flag different things
in the shell script. I could see us moving the argument-parsing into
diskimage_builder.disk_image_create:main() and just setting things in
os.environ before the exec()).
* I7092e1845942f249175933d67ab121188f3511fd sets IMAGE_ELEMENT_YAML in
disk-image-create by calling-back to element-info. We can just call
element_dependencies.find_all_elements() in here an export is to
os.environ before disk-image-create starts.
* remove need for ramdisk-image-create symlink by just exporting
IS_RAMDISK based on sys.argv[1] value
* you could even unit test some of this :)
Change-Id: I69ca3d26fede0506a6353c077c69f735c8d84d28
Currently we have all our elements and library files in a top-level
directory and install them into
<root>/share/diskimage-builder/[elements|lib] (where root is either /
or the root of a virtualenv).
The problem with this is that editable/development installs (pip -e)
do *not* install data_files. Thus we have no canonical location to
look for elements -- leading to the various odd things we do such as a
whole bunch of guessing at the top of disk-image-create and having a
special test-loader in tests/test_elements.py so we can run python
unit tests on those elements that have it.
data_files is really the wrong thing to use for what are essentially
assets of the program. data_files install works well for things like
config-files, init.d files or dropping documentation files.
By moving the elements under the diskimage_builder package, we always
know where they are relative to where we import from. In fact,
pkg_resources has an api for this which we wrap in the new
diskimage_builder/paths.py helper [1].
We use this helper to find the correct path in the couple of places we
need to find the base-elements dir, and for the paths to import the
library shell functions.
Elements such as svc-map and pkg-map include python unit-tests, which
we do not need tests/test_elements.py to special-case load any more.
They just get found automatically by the normal subunit loader.
I have a follow-on change (I69ca3d26fede0506a6353c077c69f735c8d84d28)
to move disk-image-create to a regular python entry-point.
Unfortunately, this has to move to work with setuptools. You'd think
a symlink under diskimage_builder/[elements|lib] would work, but it
doesn't.
[1] this API handles stuff like getting files out of .zip archive
modules, which we don't do. Essentially for us it's returning
__file__.
Change-Id: I5e3e3c97f385b1a4ff2031a161a55b231895df5b
We're getting double time-stamps in the console log of upstream jobs.
Move the logging of a prefix datestamp into a "-t" option to retain
the status quo prior to Id9ea5131f0026c292ca6453ba2c80fe12c47f808 (we
could, of course, do it the other way and turn if off in the jobs, but
since we didn't have it before...)
While poking, make the time-stamp consistent and always prefixed if -t
is turned on.
Also, it seems the parallel options got a bit of sync with what got
merged. Add "-j" documentation and remove unused "p" option.
Change-Id: Ic7c2ebeca3f9d5784cac59505b6e6181151f5805
Running the functional tests is time consuming. This patch adds the
option `-j <job count>` to the tests/run_functests.sh: when given the
test run in parallel up the <job count> jobs.
When using this, be sure to have enough resources (CPUs, RAM and HD
space) on the host.
In addition there was the need to change two things:
o Global /tmp/dib-test-should-fail was move to temporary build
directory of each execution.
o Because the logs might now interleave, each log line has now a
prefix of the name of the testcase.
[In my environment running functests sequential takes 15+ minutes,
running them parallel takes less than 6 minutes.]
Change-Id: Id9ea5131f0026c292ca6453ba2c80fe12c47f808
Signed-off-by: Andreas Florath <andreas@florath.net>
This patch solves three issues with Debian packaging / apt:
o When building 'testing' only default apt sources is
included - backports, updates and security are skipped because they
do not exists.
o The default release for Debian was `unstable`: this is now fixed to
`stable`.
o Starting a Debian Stretch VM that was build with diskimage-builder
does not work, because some mandatory packages are missing.
This patch fixes this problem: it adds the mandatory packages and
the test case.
Change-Id: If49b5b162c4da1e074e9b19324839bc59d87dc57
Signed-off-by: Andreas Florath <andreas@florath.net>
We made this non-failing so tests could pass before
I92299b2f59aa8e7de8995a6294bf6c88bbd4cdc5 merges. We should make this a
test failure.
Change-Id: I4dd38c835d6fb397bbd0475120a4b0f2ab0290a8
Depends-On: I92299b2f59aa8e7de8995a6294bf6c88bbd4cdc5
We have some test cases which attempt to build docker images, therefore
we need docker.
Fix a few bugs that showed up when we run docker tests - we need to
docker rm with sudo and docker images don't always have a /tmp so check
before unmounting it.
Change-Id: I147d0ef3f2ea83f35bac568214573a6bde0b1967
lib/img-functions:finalise_base() does a recursive unmount of /tmp to
cleanup any old mounts that might be in there (we do things like bind
mount caches in there). unmount_dir fails if /tmp isn't a
directory.
The 'run_output_format_test.sh' uses the 'fake-os' element for
testing. Because 'fake-os' did not create the '/tmp' directory, the
test script fails.
This patch fixes the problem: it adds '/tmp' to the list of
directories that are created.
It was implemented replacing the existing five 'mkdir'
command with a for loop over now six directories.
Change-Id: Ic7aca155492967b9819f129d3843cf95e136410e
Signed-off-by: Andreas Florath <andreas@florath.net>
Here I add test deps for Gentoo, the main ones to call out are as follows.
* pyyaml: not installed by default and needed for the package element
* parted: not installed by default and needed for the VM element
* multipath-tools: not installed by default and provides kpartx
Change-Id: I07ce871fb3e684bfd9d06268d5c5bd118314f321
This was not well tested. Build the argument into a variable which
can be eval()ed to produce the final output.
Add the flag so we test this during functional tests. Add "-x" to dib
invocations so we can more easily debug failures.
Change-Id: Ifdc82627c520379b4124ccb9a4c2fe806c52c75c
Add qcow2 generation for better test coverage. Add "-x" to the dib
invocations so we can better debug failure cases.
Change-Id: Idd0e33c70fcd7737e6dc43e26b054fbc2982c022
The idea was to put this in non-voting, but we never added it to the
skip list so it has been running by default.
Change-Id: I67f3453607077146ceb9430d12b4b9bfcd34437f
This commit adds testing for the gentoo element based off of the debian
element. In adding testing support a couple of additional errors were
found and corrected, namely the following.
* shm is not in /proc/mounts though it is valid for use based off of
the sticky flag.
* The path in ELEMENTS_PATH needs to be pruned to be usable.
* Added uuidgen-runtime to the list of packages installed for Ubuntu
as the new ubuntu-trusty image does not ship with it.
Change-Id: I0d2768a912b350e1b2cf40d2fd227fdc767b1bcb
This reverts commit 5184d02a7c.
The decision was made to go with fstrim because it is faster and more
universal that zerofree. The related-id has the patchset that implements
fstrim.
Related-Id: I269b4416be450369616f9b8e030f84c30e329804
Change-Id: If40cf2fc0ecd8686768cbfeac9ecee90907674e7
If the image has an ext filesystem and the zerofree utility is present
on the build system then run zerofree. This should make images as
compressable as possible which is a nice feature when building
compressed qcow2 images.
Change-Id: Ia6062c291f7a3f58b85a4f408ecb3d0574c65d53
This simplifies and enhances the functional-test runner script for
much better interactive behaviour and to give us the ability to better
choose what is running in CI.
Firstly, I have split the image-output testing into a separate script.
This is not actually part of the functional testing of elements and is
both logically and functionally different. It currently does not run
in upstream CI because we don't have docker in the images. I have
nothing against it, but it can be it's own thing.
run_functests.sh is overhauled to have a useful interactive interface,
e.g.
---
$ ./run_functests.sh -h
run_functests.sh [-h] [-l] <test> <test> ...
-h : show this help
-l : list available tests
<test> : functional test to run
Special test 'all' will run all tests
$ ./run_functests.sh -l
The available functional tests are:
apt-sources/test-sources
debian/build-succeeds
fedora/build-succeeds
fedora/build-succeeds-f21
ironic-agent/build-succeeds-fedora
---
As described there, you can run a single test, a number of tests, the
default tests (as CI will do) or all tests. Running all tests is too
much for regular CI, but currently the only way to stop a low priority
test running, or temporarily pause is to remove it completely --
clearly sub-optimal (see I93c2990472e88ab3e5ff14db56b4ff1b4dd965ef).
There is nothing complicated about this, and to further simplify I
have merged the runner functions back into run_functests.sh which
remains a very modest ~150 lines, with most of that being argument
sanity. With that and the image-format cleanup, we can remove the
indirection of the 3 small library files.
For consistency, I have renamed the "dib_functions_test" (that tests
things from the dib functions library) with a run_* prefix.
Because the default list is the same as the current functional tests
run, this does not modify the status-quo. I plan to modify this,
however, to run fedora-minimal & centos-minimal tests in a future
change, as these are required to be stable for openstack ci.
Documentation is updated, and a README.rst is added in the tests
directory for discoverability.
Change-Id: I86d208bd34ff09a29fdb916a4e7ef740c7f65af8
I noticed when running functional tests via a interactive shell they
would end up hanging; I tracked it down to waiting for input on this
tar command. We need to specify "-f" so it opens the file ...
---
| + tar -t /tmp/tmp.qid2Ygfu7v/image.tar
| + grep -q /tmp/dib-test-should-fail
| tar: This does not look like a tar archive
| tar: /tmp/tmp.qid2Ygfu7v/image.tar: Not found in archive
| tar: Exiting with failure status due to previous errors
---
I guess we never noticed because it's always running in CI where stdin
is closed and it just get that nothing read above. This probably was
reversing the logic of the "should have failed" tests ... but I don't
think we take that path currently for any tests.
Change-Id: Idad2c172797395d45c0d750ec687011cc1fbf52a
We don't need the follow the pattern of checking wc -l against
/proc/mounts is 0, we care about any match, so we can just use
grep and it's exit code inside the if.
Change-Id: Idd0d78a613f8b43f169a320527c763d0bff74368
