In some scenarios, the required space in the tmpfs partition can be
larger (or smaller) than the default one, producing errors due to
the lack of enough space (or performance penalties for not using
tmpfs).
Using --min-tmpfs <size>, we can hint the working set size we'll need
and let dib choose to avoid or use tmpfs.
Change-Id: I7d5fe498302a100c8555ae542268e14b21f3a0c5
When compressing an image, this is done in the same dir where the raw
image resides, doubling the amount of space needed (scarce when
using tmpfs), and then it's moved to the .cache folder in disk.
Combining these two functions, we reduce the amount of space needed
in the tmpfs partition (when in use), and the compressed image is
created directly on the .cache folder disk, so there is no need to
move the compressed image after the process into disk.
Change-Id: I451d24bdd6fa0983414244135dff5e96c0549833
If GRUB2 is not available in the system a fallback to install Extlinux
will happen. This patch also allows you to enforce the use of Extlinux
exporting the DIB_EXTLINUX variable.
Change-Id: I88fa792a0bd19cacca167134f2054b11c807a451
This patch is part of a another big patch that will implement a fallback
to Extlinux in case GRUB2 is not available in the system. The reason why
it's being splitted in two patches is because git is not being able to
recognize the file changes when the rename happens in the same commit.
Change-Id: Ic2027dfa057fd6d62b532203b7ff50c3c739bccb
The element bind mounts a pip cache inside the image build chroot so
that pip downloads can be reused across image builds. While similar
in purpose to the PyPi element that sets up a mirror, this element
just allows for a reusable download cache and doesn't require anything
to be setup beforehand.
The pip-cache element is not concurrency safe, and that is indicated
in the README for the element. An upstream bug was file as well:
https://github.com/pypa/pip/issues/1141
Change-Id: Ibd1d4ea17c24923ed939357ada95b781e3179cfd
here is a bug associated with this patch because there is a
workaround included. Calling sync to enable the unmounting...
https://bugs.launchpad.net/diskimage-builder/+bug/1214388
Change-Id: I9d5a1f092fd8f3ae1c14de03dd516203baab4da3
Rather than dublicating code to implement rhel or any
other derivitive, this patch introduces an rpm-distro
element that should be used as a dependency.
Change-Id: I8a92bb041764d03f430b438f0013704f79a8674c
If the loop partition isn't created as a device by the kernel, go ahead and use
kpartx to create the device.
Change-Id: I53290b7724d0cb45a1fc9225ec096025db8978dd
When ramdisk-image-create is called with the hwdiscovery element,
it failed to install hwinfo package.
The root reason is 10-hwinfo is not executable, the fix is to
set the file permission of 10-hwinfo to be executable.
Change-Id: I3a57147103f607b3975eb6ad23a44475f26c2f1e
IP address is passed as a kernel boot param when booting undercloud
machine. For Fedora 19, this IP is not set, instead IP is fetched
from DHCP.
The problem is caused by a bug in dracut-network version 029, which
causes that dracut network setup script is not executed properly. This
patch applies a fix for the bug when building undercloud image.
Fixes: bug #1213833
Change-Id: Ie94a86ed716044343791628973143c1a7d0778dc
dib-run-parts is a symlink into the elements directory.
During packaging the symlink is preserved however
during installation dib-run-parts becomes a file containing
the contents of the symlink target.
Related-Bug: #1212482
Change-Id: I78c28a52689810a2ccfc9925a9ac8df017c44326
The yum element provides for specific customizations
for yum based distros. The included customization is
a yum cache mounted outside of the chroot so that yum
downloaded packages are reused on subsequent image builds.
Change-Id: I6833c9fdbc83cb09debec6a789082e105c917800
The dynamic kernel module system is not available on RHEL, CentOS,
Scientific Linux, or SUSE. Make it part of the distro post-install
rather then base post-install.
Change-Id: Ic2c345bf9f0738dadae611194e263d3a5d424a3e
- pip install to a github URL without a git+ prefix fails.
- Need to close EOF heredoc when creating mirror.yaml
Change-Id: Ic555174881e9c06fede1cf731141cbe6eb0e0b02
Using a custom pypi mirror can be very convenient, making image builds
substantially faster - because we create multiple virtual
environments we benefit more than single-virtualenv users would.
Change-Id: I997daf1f9477c447e1fb30818aea9e80a49b31a6
Manually listing the mount points that need cleanup is not
maintainable and makes it hard to write elements that use bind
mounting to inject resources into the build environment.
Change-Id: I7c9ade444f4ebe42552f8e321f257a7ec0a674ef
The images produced by the diskimage-builder have their filesystem with
a label of "cloudimg-rootfs", The regex changing fstab on fedora didn't
match the F19 case.
This regex matches both
F18 :
LABEL=_/ / ext4 defaults 1 1
F19 :
UUID=f2da0fc8-2e12-4a6e-8e95-a31a474aa1a8 / ext4 defaults,noatime 0 0
Change-Id: Iafcf5e069199f1df76874309b2d5064f343fb5e5
Most of our build process runs as root and the overhead of explicitly
tracking sudo commands in the shipped sudoers.d file, plus the
operational overhead of keeping the sudoers.d file updated on build
hosts over time, is now considered to be unnecessary.
Instead, we now document that the build process will expect sudo
commands to work and the operator must make this happen (either by
running as root, via sudo -E, or allowing passwordless sudo for the
build user).
Change-Id: If2628e7d0c7efde0fb99c84a217523ba29b1b38d
Add a potent example (and simply remedy) of how element authors can
unwittingly conflict with each other in ways that it is almost
impossible for us to guard against with low level policy/mechanism in
di-b. Fixes bug 1181309.
Change-Id: I51e845065702911371e448521327143495c3b405
We try to expose metadata to users about what dib included in the
image and source-repositories was not doing that, so this fixes it. It
also permits easy introspection from other elements (such as an
upcoming PyPI cache layer).
Change-Id: I1e48e65f69ebe1f4556cc3bf35ccf195e99bcc76
A user running di-b several times while developing an element may not
want to drop to a shell in all cases but may only want to do so if one
of their in target hooks failed.
This patch gives them the ability to do so, If break=after-error is set
then a user will be provided a in target shell taking over from where the
last failed command left off.
Change-Id: Ia2f7ac4c21b64b971f87f4ae9cb867981b13eb5e
Previously if mktemp failed in function mk_build_dir, die was not
called. The check for the exit code was actually checking that the
previous export statement completed successfully, not the call to
mktemp.
Change-Id: I477a2ce75c87c8167883ce7aa342e93c40770e29
(Based on review https://review.openstack.org/#/c/36009)
Scripts test for existence of ../share/diskimage-builder and
fall-back to ../ if not found. This allows scripts to run unmodified
from a packaged installation or a local archive/repository.
Change-Id: I0cf4c1fdb8e42ec284c56860cb15818632b93b9e
Ubuntu 13.04 has been released now for 3 months. The updated libvirt,
openvswitch and kernel are all beneficial to various OpenStack components,
and many other software is updated beyond the versions in Ubuntu 12.10.
Change-Id: I358aed8bf906c3ff5103f19b1f9e6ac689b5d5ee
source-repositories uses find to discover things it should import. If
someone happens to use emacs, and happens to have had an autosave file
in a directory with a wildly broken version of a source-repositories-
file, then dib will attempt to execute the contents of the autosave file
and the user will be sad. Adding a filter to the find command for files
ending in ~ will prevent pain and suffering.
Change-Id: I27c8a4b53d3c9b913ca926db16b4271941f6fb5d
While following install instructions in README.md it should be more
clear how to install qemu-img on your system.
Change-Id: Ibb8828806bf46716b91b83a4eea696f4fe478206
As another step in aligning further with OpenStack practices, stop
ignoring the hacking style checks.
Change-Id: I16c9f0ca3be5790176467377303817249e7643ea
devstack-gate needs to be able to make an image that has pre-downloaded
but not installed a sequence of packages. To support that, add a -d flag
to install-packages to allow downloading but not installing. -d passes
through on a dpkg install, and with this patch should be transformed
to --downloadonly which is the yum version.
Change-Id: Ia4e61fa4304df86afbee7dfc8067ea1bdf528f3e
As a first step to OpenStack alignment, get test-requirements.txt in
line with current OpenStack standard practices.
Fixes: Bug #1205546
Change-Id: I899c3dc167df191b84008250671c58520c436a30
Symlink /usr/lib -> ../lib for Fedora deployment ramdisk. This
symlink is needed for systemd-udevd. Otherwise, the network device is
not loaded and initialized when the deployment image is booted. This
logic was previously contained in
elements/deploy/root.d/50-redhat-prepare-fs, but now that ramdisk
images are built in a chroot, the change needs to be moved so that it
is applied to the ramdisk build.
Change-Id: Icea43230126956ccf5fb8a6a96ca706b75d5c32f
