It's better to report all of the failures in one shot, so we should
make sure a flake8 failure doesn't immediately end the dib-lint
run, and instead just sets the error flag like the other checks.
Change-Id: Ib13fc71bb12a6565888bdd89f33fc6ada89f8d8c
This was not well tested. Build the argument into a variable which
can be eval()ed to produce the final output.
Add the flag so we test this during functional tests. Add "-x" to dib
invocations so we can more easily debug failures.
Change-Id: Ifdc82627c520379b4124ccb9a4c2fe806c52c75c
We don't want the output of "du" run on the image spammed into the
logs with "set -x". Swizzle it off around the sensitive commands.
Change-Id: I687e77275f9a49e7934211835aba8610e88cdca6
If you check logs like [1] it's literally thousands of lines of the
same thing over-and-over as the git caching happens. It is basically
all just noise unless you're debugging it specifically. Up this to
tracing level 2 ("-x -x") to see it. Add a note in the help about
multiple flags, which has always been intended but not documented.
Image builds should continue to run with single "-x", but we could
probably greatly increase signal:noise ratio in the logs with a little
more judicial use of this to turn down some of the very noisy &
repetitive parts.
[1] anything in http://nodepool.openstack.org/
Change-Id: I91c5e55814ba9840769357261d203f4850e2eba6
This cuts the image size down alot, esspecially if there were lots of
small file deletes.
The fstrim utility is in the util-linux package and should be on
most all systems. fstrim also works with XFS, ext4, btrfs, etc
prodiving the kernel is new enough.
A reduction of 25% or more in size is common.
Change-Id: I269b4416be450369616f9b8e030f84c30e329804
In the common case of not specifying a size, we are already running
"du" over the image to figure out how big it is. Leverage that by
saving it's output and displaying a pruned list of big files when
requested.
We add a flag to show a summarised option (files >10MiB) and another
to show full output, should you wish that level of detail.
"Invocation" documentation is updated (and formatted a little better
while we're here).
Change-Id: I255800790a62fed1c82fcd311f1cc29c9867766d
Being able to discover DIB's version from the command itself is
convenient. This patch adds a --version option to the disk-image-create
command, failing gracefully if diskimage-builder is not installed.
This adds an explicit dependency on pbr to the requirements since this
is required to run diskimage_builder/version.py outside of a test
environment.
This patch consciously chooses to only provide the long-form option
and no '-v' to allow for the future possibility that a '-v' might
indicate '--verbose' in the future.
Change-Id: I9fc084774d6c7a39a944b07680b3eb8be8e34f9c
This checks the profile, if it has hardened in it's name it needs xattr support
unfortunately xattr support cannot yet be relied on everywhere, so it needs to
be disabled for hardened profile builds to correctly pax-mark.
Change-Id: I7fb855249a9e6c9b6497ab5061b4ea3c014f5081
Closes-Bug: 1537177
Our dib-lint checking is only considering scripts with #!/bin/bash.
While there's nothing really wrong with some other shebang line like
"#!/usr/bin/env bash" let's keep things consistent.
We can use the same regex match to reduce a few forks in the main
checking.
Also a minor cleanup to the file matching
Change-Id: I609721b2671e704ea26075dad7e5b39a8b858f6b
This patch fixes the calculation of the resultant image size
when building an image with diskimage-builder on ext4 a
filesystem.
Prior to this, using the '--image-size 2' (2GB) setting would
generate an image that would not boot under a 2GB nova flavor.
Change-Id: I7a753bdef84c6300ccea73ae4a92bf330dcd77cb
Closes-Bug: #1513622
Patch adds support for using decimal values for $DIB_IMAGE_SIZE.
This allows for creating images that are <1G in size.
Change-Id: I945644a8e77fecfb0b83efa282dc00bb29514e0b
Closes-Bug: #1366909
Some of the elements-deps in the project-config repo have a blank line
at the end, which throws out the ordering. Strip blank lines, like
comment lines, before processing.
As an additional help, show a side-by-side diff of what is provided
versus what is expected when showing an error about sorting.
Change-Id: I007851ee01d6853ad992ce4437331e8bd79bbfce
When dib-lint complains about wrong indents, it doesn't give you any
indication where the problem is. This repeats the grep on failure,
outputting the line and line-number.
As a bonus, skip *.orig files from merges
Change-Id: Ifbbdf854ea19191f66e9823468dbc0afc2f93e1f
Look for files .yaml and pkg-map configurations, and try to load them
either as json or yaml. This way, invalid ones can be detected before
they are committed unnoticed.
Also, exclude .yaml files from being searched while checking bash and
python scripts.
Change-Id: I2478837cfe66929ae1b0d7dd96e049773a35e11c
As described in the comments, inspect the installation to see if we
have been installed with "pip -e" and, if so, make sure we reference
the scripts from the source location rather than the
system-installations.
Update the documentation with a terse but helpful quick-start to show
an easy way to start developing a change using this.
Closes-Bug: #1491035
Change-Id: I0460061b834a2b854175f8c9be2be8d38c540c9d
App containers are a format used by rocket and are specified at the
following url:
https://github.com/appc/spec/
Change-Id: I8ac24f0194c4bf53dffd6c47e0587bc413101698
We can already produce tarballs, which is the input format docker import
expects. This makes it trivial to add docker as an output format.
Co-Authored-By: Dan Prince <dprince@redhat.com>
Change-Id: Ib60db3b717d33d4cf3181d70fe0ffbfa86fd5d02
Pass an explicit template to mktemp since that is required on Mac OS X.
Hardcoded to /tmp since I did not want to bother validating TMPDIR which
is user supplied.
Explicit define a repeating group which causes a grep error:
repetition-operator operand invalid
Change-Id: Ib23cc15db7f7dfdd611280884e46342562d545df
Split the cleanup_dirs function in two, i.e. cleanup of the build dir
and the image dir, and use the former to cleanup the temporary build
subdirs after their unmount, before the conversion to other disk
formats; they are not needed anyway at that point, and allows to save
disk space during the conversion phase.
Change-Id: Ie30d7e6033613d6979148423326ae7e17a7342e7
I noticed dib-lint was running on my editor backup files and checking
python files (covered by flake8) and RST files
Change-Id: Ide2e8a4c1aa8d619bc4b0326a2cfc5e63c74475f
$DIB_DEFAULT_INSTALLTYPE is propogated into the chroot by writing out an
export statement to a file under environment.d. However, that export
statement does not account for other elements that may choose to define
$DIB_DEFAULT_INSTALLTYPE earlier on in their own environment.d files.
Change-Id: I5865b1859c080c328251e8dce072c0634ef75c16
We do not have any testing inside DIB for testing disk-image-create
logic. Lets do some smoke testing for all our supported image formats.
Also adding a run_functests.sh so we can extend this later without editing
the jenkins job.
Change-Id: Ie491e27f00bde54f73af6b47c9696ec04d973b14
Our logic to determine needed image size doesnt fully account for the
in-filesystem journal. This only shows up when creating images that are
very small relative to the FS journal size.
Change-Id: Ic3c2bcd31ec4fee6bcd9f67767842eb3fbe20d3a
At present, MKFS_OPTS is closed for modification. The ability
to extend the set of MKFS_OPTS adds a great deal of power for
knowledgeable end-users. (And in some specific circumstances,
it is vital to success, as in the case of building RHEL/CentOS
6 images from RHEL/CentOS 7 hosts, in which case -O ^64bit is
required in order for the image to boot.)
Change-Id: I714e86a5a413779e63f598fbbb5a79d23cf6d8c3
We currently use qemu-img convert with a raw source and dest when
building raw images. We can just mv the file for increased speed.
Change-Id: I3da095cb9ecad7224a121a434a9fb204132bf6df
There is a wide variety of tracing options through the various shell
scripts. Some use "set -eux", others explicity set xtrace and others
do nothing. There is a "-x" option to bin/disk-image-create but it
doesn't flow down to the many scripts it calls.
This adds a global integer variable set by disk-image-create
DIB_DEBUG_TRACE. All scripts have a stanza added to detect this and
turn on tracing. Any other tracing methods are rolled into this. So
the standard header is
---
if [ "${DIB_DEBUG_TRACE:-0}" -gt 0 ]; then
set -x
fi
set -eu
set -o pipefail
---
Multiple -x options can be specified to dib-create-image, which
increases the value of DIB_DEBUG_TRACE. If script authors feel their
script should only trace at higher levels, they should modify the
"-gt" value. If they feel it should trace by default, they can modify
the default value also.
Changes to pachset 16 : scripts which currently trace themselves by
default have retained this behaviour with DIB_DEBUG_TRACE defaulting
to "1". This was done by running [1] on patch set 15. See the thread
beginning at [2]
dib-lint is also updated to look for the variable being matched.
[1] https://gist.github.com/ianw/71bbda9e6acc74ccd0fd
[2] http://lists.openstack.org/pipermail/openstack-dev/2014-November/051575.html
Change-Id: I6c5a962260741dcf6f89da9a33b96372a719b7b0
When building the ramdisk we don't cleanup the temporary
directories after ourselves. This leaves /tmp/image.* directories
mounted and /tmp/image.* directories on the system.
Also the ramdisk-functions duplicate, from what I can see,
the cleanup function from common-functions. So when a job
is killed off it ends up leaving /tmp/image.* directories
on the system.
Change-Id: I2d73aabd0eb176027b4e7368580db08902e2b6ab
We now guard against diff returning non-zero (which it does when it
discovers changes). This allows dib-lint runs to continue past the point
of displaying a dependency ordering nit.
Change-Id: Ib7801597400d6d87146181935922c8832baf5aaa
Change the shebang from /usr/bin/python to /usr/bin/env python
Some users, especially on older systems don't use the python
supplied with the OS. This has an impact with module loading if
the python in /usr/bin is 2.6, and user wants to use 2.7
in /usr/local/bin, for example
Change-Id: Ib31b369a94c33fb7508f0539c2b2f14177e507e0
Unlike most of the options to disk-image-create, this one didn't
document its default value, and it also didn't have any context for
why one might use it.
Change-Id: I57ea529cf387ab8ec8497d35be19ac64198df47a
Related-Bug: 1397073
Avoid a warning when multiple arguments are passed to disk-image-create
like:
bin/disk-image-create: 146: [: aa: unexpected operator
Change-Id: I619d7bf2e4b56885d629019b80b249bc80b8f43e
Instead of charging ahead and failing because we lack dib-run-parts we
can fail in this case with a useful error message.
Change-Id: Ie10176b5a7019a0385796984ebbaf7742876925a
We check python files with dib-lint rather than flake8 which have
conflicting opinions. This means weve been (forcibly) writing non pep8
python.
Also fixing pep8 issues so tests pass.
Change-Id: Idc9db40334f6e15738a7802c06697270df68741c
This element creates kernel and ramdisk files based on Fedora,
example:
disk-image-create -a i386 -o test fedora ironic-agent disable-selinux
Change-Id: Ifa133d1680b81cb87d32a405aa7d7b40fe91f835
The current dib-lint script has an exclusion for indent but it is
erroneously used as a label around the tab indention check. This
patch renames the tab indention exclusion and adds the indent
exclusion where it belongs.
Change-Id: I701595e7a08f4764a45c6701d67cbb931c3d47f3
Adds new disk-image-create --install-type option which
can be used to enable alternate install types. The
default install type is 'source'.
The motivation is to eliminate elements like
enable-package-installs which require coupling and also
don't work with elements in multiple element repositories.
This patch does not prevent you from using the previous
DIB_INSTALLTYPE_ variables to customize the install type,
rather it just changes the default so you don't have to
set it so often when using things like packages.
Change-Id: Icee98440fc2251728f2dca30e7c4789a0fd89b93
It is needed by the debian element in the root.d phase. (enviroment.d variables are not available after the base image is built)
Change-Id: Idb8f9795a619687569bcb0de774c87333d11b292
Closes-Bug: #1384103
This commit adds a new element named 'iso' to build a bootable
ISO image for the kernel/ramdisk emitted by the 'baremetal' or
'ramdisk' element.
Change-Id: I89d175a29e2d0bc64b47fe527f0d0f6875f6849a
The element builds dracut from source on Ubuntu because the
Ubuntu dracut package is broken and very old, so it can't be
installed properly and causes a number of other issues that
are fixed by using a newer version of Dracut.
This initial version should work in virtualized environments.
Further validation of its suitability for real baremetal
deployments will need to be done in the future, but this should
be sufficient to enable that work.
Regarding Dracut specifically, in order to limit the changes
needed in the existing scripts this element continues to use a
cut down version of the /init script that we were building for the
existing ramdisk. However, instead of running it as pid 0 it is
run as a Dracut pre-mount hook. This allows Dracut to set up all
of the hardware and system bits, while falling early enough in the
Dracut sequence to complete the deployment before Dracut would try
to boot off the hard disk.
bp tripleo-juno-dracut-ramdisks
Change-Id: I144c8993fe040169f440bd4f7a428fdbe3d745cf
After being deprecated two releases ago, finally remove any reference
for the support of first-boot.d
Change-Id: I08d67404ef48cad61db3b18fb86e970abfa5d2b6
When uploading images to multiple clouds it is possible that the same
image will be needed in multiple formats to accomodate hypervisors
across clouds. Update disk-image-create's -t flag to take a list of
desired output image formats so that a single disk-image-create can
output all of the desired image formats.
Change-Id: If121b2342ae888855ba435aa3189f039e985b812
Per [1], our current root label of cloudimg-root does not work with
XFS because XFS only allows 12 character labels. This change
addresses that by allowing a custom rootfs label to be specified
in the call to disk-image-create. There should be no backwards
compatibility concerns as the default label is unchanged. Any
external elements dealing with the label would need to be updated
to support this new feature, but should continue to work as before
as long as a custom label is not specified.
[1]: https://bugzilla.redhat.com/show_bug.cgi?id=1139584
Change-Id: I596104d1a63b5dc6549e8460a1ae3da00165ef04
Now that dib-run-parts has been moved to the dib-utils project, we
need to update diskimage-builder to use it instead of the version
directly in diskimage-builder.
This change removes the old copy of the dib-run-parts script in
the element, adds dib-utils as a dependency of diskimage-builder,
and updates the uses of dib-run-parts to correctly handle the fact
that it is now external to the project.
Requires I0be1f876d0e4a7d38e0d5c6010a552a8ebb158a4
Change-Id: Ia0a0df7784a14c49b5c47ac0b03e6c2602c84b3b
Just remove globally /lost+found after the root and install phases, so
distribution elements don't need to do that by themselves.
Change-Id: Ic783e613bd8794aefd3f40c9a7c308d14cd04b8d
This patch adds exclusions for the indentation and newline
rules in dib-lint. The indentation exclusion is needed for
files using heredoc and wanting to preserve indentation.
The newline exclusion is added here for consisently treating
all dib-lint rules the same.
Change-Id: Ic8a2164eba3cf99e55473846e3a5fe663a3c1095
This will be useful for adopting dib-lint in other projects, in
particular tripleo-image-elements. It allows some dib-lint rules
to be used even if the project can't pass all of the checks. The
failing checks can then be fixed one at a time and removed from the
exclusions list.
For consistency, this change reads the new exclusions from tox.ini
in the same way as flake8. To use the exclusion mechanism, the
the following section can be added to tox.ini:
[dib-lint]
ignore = sete setu setpipefail
Change-Id: I6d8024e7613890e935ceb5e50d0d507bd554d8dd
Add a --options flag that allows disk-image-create to send custom
options to qemu-img calls. It is useful for forcing compat into
qemu-img created images.
Usage:
disk-image-create --qemu-img-options compat=0.10 base ubuntu
Change-Id: I73ee2c86abc115220d51ffebbbe9ce3c4d92f188
Closes-Bug: #1329746
The script to find best kernel from image (used by vm
and baremetal element) is duplicated and is not in sync
with each other. Moving the code to img-functions as a
function will reduce duplicated code and make it reusable
in future.
Since img-functions is not accessible in chroot env,
kernel selection is being moved from finalise.d to
cleanup.d in the vm element.
Change-Id: I8fbccc13a2c61a5191ef9ea5d2a8302a3e43b000
Add support for d-i-b to create tarballs, the primary consumer for
tarball images would be linux containers.
Change-Id: I27d67401f3e4415226a4a51e1dde46f739c0220a
Currently when dib-lint finds a problem it does something like:
echo "ERROR: Problem found"
rc=1
This is repetitive and error-prone since it's easy to forget to set
rc to actually fail the check. This change makes those two steps
a single function call.
Change-Id: I40b5bf39348a69add1f955c49f310e3bda21be0e
With this change, dib-lint raises an error if when finding an element
using space indentation that is not multiple of 4.
Co-Authored-By: Jon-Paul Sullivan <jonpaul.sullivan@hp.com>
Change-Id: I470e1fdfc38a3f3c7ba5644c5103f2a9ef073005
This will hopefully catch bugs where they happen rather than
allowing scripts to continue on and fail later.
Change-Id: Idacd9274415b21db285a198dafff19b1d19a4a68
With this change, dib-lint ensure elements do not use tab
indentation. The following files are checked:
- executable file
- .md file
Change-Id: I071262ff9f6599548f869f5439ee127f64eeb46f
If scripts are not set -e then errors can be ignored, causing more
confusing failures later.
Also adds an exclusion comment to the ramdisk init script since we
don't want that to exit on failure.
Change-Id: Idf43993bd10b1ef16c1d3b0d9df8d0ad94c46458
There are certain scripts (such as the ramdisk init script) that
need to ignore linting rules for one reason or another. This adds
support for exclusions via a comment in the file like:
"# dib-lint: disable=executable sete"
There should be no ", but I need those to prevent git from treating
that as a comment. This syntax is similar to the pylint exclusion
mechanism.
Exclusion support is added to the executable check, but not
the alphabetical ordering one because I can't imagine a reason we
would need to disable that, and I don't know that comments are
supported in those files anyway.
Change-Id: I9ecfb47269841dc75a005855455ac26ad2cbc642
The phrase is no longer needed as of August 23, 2000 with Nicaragua's
joining of the Berne Convention.
Additionally, in at least one instance,
elements/cache-url/bin/cache-url, its existence in the file between
Copyright lines is just weird and feels misleading, even though it is
not.
Remove all of the lines, because sanity.
Change-Id: I24fd76c2b4f66b8036010b5079db39ead729abee
We've started to require this in reviews, so we should really have
automation in place to catch it right away.
Change-Id: I43fd90647acba400cea11c665fb587856514b0ee
This will provide a place to put checks that catch common errors
in elements. To start, this just checks that files starting with
a shebang are chmod +x so they can actually be run.
Change-Id: I4116a8f38f7bdfc5866764354c459fad8ca18e92
save_image is used to copy kernel and ramdisks out of the image, which
we will sometimes want to keep the source, and sometimes not. However
for the main image itself, the temp copy is never kept, so use mv
rather than cp and avoid the excess IO.
Change-Id: I5a9f0d69ffee3e6b872a8927537ac17f02f5aa4d
