Provide ability to run dhcp client on VLAN interfaces created on
top of an Ethernet interface. See also
<https://storyboard.openstack.org/#!/story/2008298>`__ for further details.
Change-Id: Ic3ffd7b8e23b1e996cfe6c79ce0ff47e521f30be
centos-repos package is not available on centos-8-stream:
2020-11-02 15:35:20.962 | No Match for argument centos-repos
2020-11-02 15:35:20.992 | No Match for argument centos-release-stream
The build fails later on install_pkg_manager sed command:
2020-11-02 15:35:22.903 | sed: can't read
/var/cache/nodepool/dib_tmp/dib_build.iPSHptNW/mnt/etc/yum.repos.d/*repo: No
such file or directory
This change ensure centos-stream-repos package is installed to provide
/etc/yum.repos.d/*repo files
This change replace 'centos-release-stream' package with the new
'centos-stream-release' package [1]
[1] https://lists.centos.org/pipermail/centos-devel/2020-September/056069.html
Change-Id: I6c397bf7b5797a02e5f006c18ee63c9cdf66b38c
We are running yum-config-manager/dnf config-manager in the epel
element. Even though the yum-utils package is declared in the
package-installs.yaml file, the package-installs pre-install.d
script is executed after the one in the epel element, so image
build fails.
This commit ensures yum-utils or dnf-plugins-core are installed
before running the command.
Change-Id: Ib292b0b2b31bd966e0c5e8f2b2ce560bba89c45c
Initial patch for I78d7bcf214a45245e2073428120fcbdd968e1acd
works without the envvar set, however, 'set -eu' causes it to break
if unset.
This makes the module configuration variable not required to be
set, consistent with other DIB scripts.
Change-Id: I5ca80f518d0371a18c107c061dc923876463af57
Signed-off-by: Lon Hohberger <lhh@redhat.com>
This disables growpart module in cloud-init, not resizing / partition
to maximum disk free size by default.
Change-Id: I69984a9141fa8abb12dc5d51bd334f9280deca67
Originally it was added for missing python-cheetah dep
for openstack-nova. Nova has removed usage of it long
ago with [1]. rhel-7-server-rh-common-rpms should be
disabled once it's usage is over as it packages from
it can conflict with other openstack repos.
If some package which is needed by OpenStack Packages
is missing then instead of adding rhel-7-server-rh-common-rpms
repo consideration should be to add it in RDO.
[1] https://review.opendev.org/#/c/40205
This reverts commit c7219a5a60.
Change-Id: Iad3a1c353c10bb35f9c9ef4076b65f5c84b803b2
This file is present in both dpkg and debian-minimal element,
causing a failure to build anything with debian.
Change-Id: I8213d581a79bb432281f31955a44418e4047d9e1
Some OpenStack releases on RHEL require specific modules
in order to function correctly. This adds the ability
to set DIB_DNF_MODULE_STREAMS which then are selected
prior to package installation.
Change-Id: I78d7bcf214a45245e2073428120fcbdd968e1acd
Signed-off-by: Lon Hohberger <lhh@redhat.com>
e2fsprogs pulls in info which needs gzip. But that conflicts with the
preexisting busybox-gzip. Install normal gzip to ensure that things can
proceed without conflict.
Change-Id: I3bed5bc141eaa0f3a15bfbf9da3e2d6e7c964a76
busybox-grep is pulled in by the base image and it conflicts with rsync
package installs because rsync needs grep proper. Install grep proper
prior to installing the base distro to avoid this issue later when
trying to install rsync.
Change-Id: I2ec2bf39a2af214443a93776231657b25035e54f
The rhel8.2 .qcow2 images have moved from a single xfs partition into
an EFI style layout with separate /boot/efi partition.
This means the root partition has /boot/grub2/grubenv as a symlink to
../efi/EFI/redhat/grubenv, which is dangling when we are running the
bootloader element as /boot/efi is blank. grub-install tries to call
rename() in the process of re-writing this file, which fails and bails
out dib.
Remove this symlink if it exists
Change-Id: I5591144a3617dbae148b0c5d2a6a404942ffcd4e
Parital-Bug: #1893029
Redhat-Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1871669
I088fc4284e889147ca9a375d4a159264cff53484 tried to slot the python3
install between the 00-dnf-update and before 01-package-installs;
however it also needs to run *after* the RHEL subscription
00-rhel-registration.
Thus a better place for it is 01-00-centos-python3, which will order
it after subscription and package updates, but before any use of
package-installs.
To avoid confusion over naming, move 00-0-dnf-update back to just
00-dnf-update.
Change-Id: Ib7c82895769e4889d47e10c4b37e06a42c053903
This avoids having to have gnupg2/apt-key dependencies in the base,
and is now well supported by modern Debuntu.
Signed-off-by: Matthew Thode <mthode@mthode.org>
Change-Id: I7065b2fab6125d9635ef99ff65d374b8b6b4c3a2
This patch makes iscsi-boot element support not only just
DISTRO_NAME centos7 but also centos and centos-minimal.
Change-Id: I8db8b01f35b2e572666badd8d2316d24a5e4287a
Update an rc-update call to only be made if running openrc instead of
all gentoo profiles (systemd does not have rc-update).
Add python3-pyyaml package mappings.
Update serial console to support multiple arches.
Update open-iscsi and open-isns keywords (looks like upstream merged
some musl fixes).
Update the kernel and initramfs file name globs for the
gentoo-kernel-bin usage.
Change-Id: I259bffed3a3e3f92be2210ead6bdfa383917d457
Signed-off-by: Matthew Thode <mthode@mthode.org>
This breaks having git as a package-install in other elements. And results in diskimage-builder always erasing git on the image.
This reverts commit 3c65025559.
Change-Id: Ifb18c4243aa08055d98602aa4fdb30b16dae061d
Adds:
1. grub-efi package mappings
2. efi-64 support
3. default (openrc) arm64 profile
4. systemd arm64 profile
Cleans up the keywords and use flags in 02-gentoo-02-flags. Most stuff
was stablized. Also cleaned up some formatting for the if statements.
Enables less trusted overlays (up to the end user to verify).
in 10-gentoo-image I cleaned up some bash lint things as well.
using && instead of -a and avoiding $?
Change-Id: I3dffe1aab4bbdc4946a9bf2269bf0cde49529a4e
For Bios and EFI compatibility, grub must be installed twice.
This patch adds the bios version when EFI is selected. The GPT EFI block partitioning
already adds the bios partition, but the bootloader only called grub once.
Change-Id: Iee6c8b3b97b3cfff4562bcb30a50800f5ade894a
Closes-Bug: #1889089
NetworkManager takes a distinctly differnet network management
approach and the bulk of the dhcp-all-interfaces code is largely
targetted at distribution specific configuration. Some which may
or may not override settings, or only partially assert desirable
settings.
As such, we need to set appropriate configuration, such as the
correct client to be used, and timeouts based upon user supplied
settings.
By default this change sets the client to be dhclient on redhat
styled machines, as the packaging default, while it works for
ramdisk usage, it does not reset the interface between retries,
which can be critical if the infrastucture operator is attempting
to configure LACP trunks to the end node.
Change-Id: I0e0cfbdbf7ef2b2861b934ccd7dab9d83a35c8f0
Story: 2008001
Task: 40648
Git is a build-time dependency that should not end up in the final
image should source-repositories be the only element requiring it at
image build time.
Change-Id: Id0798c0a753f893d02c2d13fddea0c04b28cb7ca
This patch adds support for CentOS 8 Stream [1] to the centos element
(cloud image). Users should set DIB_RELEASE=8-stream.
[1] https://www.centos.org/stream/
Change-Id: Ib8f542031c46326ffed812fa60cbc9e56db9d6fd
glance-registry service was deprecated in Queens release and has been
removed in Victoria [1].
[1] https://review.opendev.org/#/c/738671/
Change-Id: Id2dfc3455b377b885521556f37f4b0f2da197655
We are at the point that all distributions we are building have Python
3, so any tools running in the chroot can assume Python 3 exists.
This makes dib-python redundant; mark it as deprecated and start to
remove it from elements where it is no longer required.
Change-Id: I5d852843ec65d3b04444b77c54c5b82424455cd8
CentOS 7 is the only distro we support currently that doesn't have
Python 3 installed in some form in the base images. For centos 7 add
an early install of it in the yum element so we can have all the
in-chroot scripts assume Python 3. There is only one package that
causes issues; yaml which comes from EPEL. Everywhere else it is a
base package, but we don't have a way to say "enable epel to install
this". Just hack it in, we don't want to go reworking the world for
CentOS 7 at this point.
Also add python3 and it's yaml library to the centos 8 path. This
brings in the "user" python3 in /urs/bin/python3 (the "system" python3
is already installed). Again, this just lets us assume
/usr/bin/python3 in scripts for all platforms.
package-installs is one of these things running python in the chroot,
and unfortunately we have elements that use it at 01- level in
pre-installd. Thus to make sure python3 is there nice and early, run
it at 0 level, but make sure it comes after yum/dnf update.
Change-Id: I088fc4284e889147ca9a375d4a159264cff53484
Other architectures are stored under "altarch" for CentOS 7, update
the match.
Convert the delimiters to "," to avoid a subtle problem with "|" --
POSIX states
Within the BRE and the replacement, the BRE delimiter itself can be
used as a literal character if it is preceded by a backslash.
So "s|\(foo\|bar\)|moo|" doesn't do what you might think; the inner
pipe becomes a literal | and this will *not* match "foo" or "bar".
Change-Id: Ic1642325e3a59a10453c356d8d839ce649812af8
Simplify gpg checking by caching a keyring instead of keys to import.
Change-Id: I5ed74ec0e12732aec40ef31377e72d7ddc347f95
Signed-off-by: Matthew Thode <mthode@mthode.org>
Now that DIB is python3 only we can remove a hack that made sure
scripts outside the chroot ran with the correct version of python.
This is necessary as python3 does not resolve symbolic links to the
binary like python2.x did, which causes element scripts to fail finding
modules when DIB was run from inside a venv.
This patch does the following:
1. Reverts 9c7b8d1714 which was the
workaround for mixed python2/3 environments.
2. Updates the scripts to use "python3" instead of "python".
Change-Id: If2402bb02fc8a4778fa9434fa167ea1fafd87c28
With the removal of Python 2.x we can remove the unittest2 compat
wrappers and switch to assertCountEqual instead of assertItemsEqual
We have been able to use them since then, because
testtools required unittest2, which still included it. With testtools
removing Python 2.7 support [3][4], we will lose support for
assertItemsEqual, so we should switch to use assertCountEqual.
[1] - https://bugs.python.org/issue17866
[2] - https://hg.python.org/cpython/rev/d9921cb6e3cd
[3] - testing-cabal/testtools#286
[4] - testing-cabal/testtools#277
Change-Id: I870286a2557e41099597c22dc9747743e1077615
EPEL centos8 have different epel repos like
epel, epel-modular, epel-playground etc, so
we need to disable all not just epel.
Also ensure other epel repositories in CentOS7
like epel-testing are also disabled.
Related-Bug: #1885315
Change-Id: I02b3b83fa2047702d5f069d3ca1c9c0bcc1dab52
DIB was retrieving the oldest cloud image file which, presently, means
retrieving CentOS 8.1 instead of CentOS 8.2. Even though DIB runs a
system update and so catches up to latest, this takes bandwidth, time
and final image space (8.1 + system update = 765M qcow2, vs 8.2 + system
update = 518M qcow2).
This patch fixes that by taking the first image name in a descending
order list.
Change-Id: I648fe19f1f76c03c97492b6ac7be6381f6f9261b
This patch adds support for CentOS 8 Stream [1] to the centos-minimal
element. Users should set DIB_RELEASE=8-stream.
[1] https://www.centos.org/stream/
Change-Id: Id0825de735ab957c10daf35fb3c641f850cc6847
Since the original merge of this code
(04208e7c79) several things have
changed; particularly now we ship dib-run-parts as part of dib, not as
a separate package.
We setup $_LIB to point to the shipped library diretory via
pkg_resources lookups. We now call dib-run-parts (as mentioned,
shipped as a dib library now), source scripts, etc. via $_LIB and thus
do not rely on $PATH. Consequently we don't need this activation
part.
Which is helpful, because "venv" (as opposed to virtualenv) doesn't
have activate_this.py. So this fixes installation under that for
Python 3.
We update the functional tests to use the virtualenv_command exported
by the ensure-pip role, which will test the venv path. There is no
need for dib_python as we are Python 3 only now.
Change-Id: Iede929ea2d278008220aac8b1d678ba41eba0d8a
The standard Python venv module does not have this script, so currently
DIB unconditionally fails. While a real fix will be provided in
https://review.opendev.org/#/c/704478/ this change at least allows
users to try work around the problem.
Change-Id: I45b79d4d283f2b3ea909612e652672dcb6092488
This reverts commit 6ee2995214 and
e85c2a6f03.
I missed that if you pip install and then run dib-lint, it's not going
to pick up the .yamllint file shipped here. Thus it gives spurious
errors.
The reason for this was simply better duplicate key detection in yaml
files, which caused us problems with the kernel installs. However, at
this point it seems just the old "does it load" test from pyyaml will
be enough.
Change-Id: I87a9fc9bb119cfeffad48fc0fa0df31f0181825d
The main reason for using the stage4 is now gone (kernel compile).
Install and use the distro provided binary kernel package.
In addition to this, set the locale and timezone, beyond that very
little was done in the gentoo stage4.
Change-Id: I541b7d9b807e2357398ae1c249b1978958dd1137
Signed-off-by: Matthew Thode <mthode@mthode.org>
As of recently, opensuse-minimal images fail to build because of an
error installing the kernel-default package:
> Problem: kernel-default-5.6.12-1.3.x86_64 requires mkinitrd >= 2.7.1, but this requirement cannot be provided
> not installable providers: dracut-050+suse.61.g0fe0e854-1.1.i586[repo-oss]
> dracut-050+suse.61.g0fe0e854-1.1.x86_64[repo-oss]
The problem is there is a recently added package `busybox-links` which
provides a subpackage `busybox-xz` which provides the /usr/bin/xz
utility. Since this is available, the `aaa_base` package installs it
during the root.d base installation phase to fulfill it's dependency on
/usr/bin/xz. On the other hand, the dracut package explicitly requires
the `xz` package, and this is not co-installable with the `busybox-xz`
package, so the dracut package is not installable during the install.d
phase. This change explicitly adds the `xz` package to the initial
chroot provisioning phase so that the /usr/bin/xz requirement is already
fulfilled and `busybox-xz` does not get installed.
Change-Id: Iba8c301eb496657873963e1aa99736aacf87cb00
This reverts commit 6e549c33ac.
It uses the new multiple-parameter matching format from
Idff7b067ad4255e6fc4138f7eff313a81b75c8ba to actually do what it says.
Change-Id: I4656ff1a5c46bcfbd8587f2f541825f4ad08820f
The change Ia6f10741fa6be24b11d6991c8a6b6e07951ff68d introduced having
"when:" as a list of values. However, this was actually not
sufficient to express the logic required for arm64/x86_64/xenial
kernel matching we wanted.
Because the package name is a key, we can't have multiple entires in
the package-map YAML files. This means we can't do more advanced
matching and thus we need to be able to match through multiple
parameters. Similar to Ia6f10741fa6be24b11d6991c8a6b6e07951ff68d we
modify the matching rules to allow a list.
A an example of using this is provided in the README.rst, and this
same example worked through by the unit tests.
This also slightly updates the matching logic to be more sequential.
After each check we either continue on or log the failure and continue
to the next check (rather than set a list of flags then check that at
the end). This makes it much easier to understand what is being
matched in the logging output from the tool.
Change-Id: Idff7b067ad4255e6fc4138f7eff313a81b75c8ba
This gives us better linting of YAML files that just opening them.
This would have detected the duplicate keys in
I34e27d821fbefe274e7b007f37b0bd34db2e1d26.
The .yamllint is taken from zuul-jobs where it is also used as a
fairly sane set of default rules.
A few minor newline fixes are added.
Change-Id: I96d6644ae24f7deb84fa50fefbda0f0d33e0e009
This reverts commit 14ff8f942c.
This seems to not be installing the kernel at all, and needs further
investigation.
Change-Id: Ifd809d4b67aff5d80f979235db246a16af0375b3
Only install the HWE kernel by default for Xenial. This was actually
installing the 16.04 HWE kernel on Bionic by accident, since it seems
to have that package; however it was breaking Focal.
On the other distros, just install the default generic kernel. Let's
KISS for now if we can ...
Change-Id: I34e27d821fbefe274e7b007f37b0bd34db2e1d26
Allow the "when:" statements to be a list of values, which are
effectively anded together to filter the package install.
Change-Id: Ia6f10741fa6be24b11d6991c8a6b6e07951ff68d
Disable all repositories after attaching a pool as in some cases that
I still can't explain, the "-htb-" repositories are enabled by default
which causes problems later on when trying to install the packages.
Change-Id: I86b3baccd4b0932eb3686a17485f64ee09994dad
New versions of flake8 fail as "l" can be confused for "1" apparently
(E741) ... not sure I totally agree but since it's only one instance,
update it.
Change-Id: Ic5c47867facd56b53cc6534da4ae3a345c516202
This should be installing the python2 and python3 packages (that's
what pip-and-virtualenv is designed to do), but we dropped the +=
accidentally in ee9ad32b6f.
However, we've moved on anyway and after
I7a6a342461d6001c25e55638ba9b7438c28f2519 F31 doesn't support this
element. fedora-latest is already updated to f31 in the opendev gate.
Remove the testing as it is no longer relevant.
Change-Id: Id696a90baa1eb05cb4c08501f8dac3665d395682
This showed up with dnf in containers when TMPDIR was set; dnf started
trying to write to this directory while in the chroot.
We already do stripping like this in run_in_target -- but this is a
bit of a unique place because it's actually setting up the initial
chroot so the target doesn't actually exist yet; so we just hard-code
it in place here.
Change-Id: If7310cb820846da903bf60daa4486c8bf7cb0136
This is an alternative approach to commit
68bb43535e. I think this proposes a
better overall solution that the prior change which had the Python 3
packages being installed, but did not specify the _do_py3 flag to do
the installation steps that redirect the various tool installations.
Fedora 31+ doesn't have python2, and Tumbleweed does have some Python
2 support but there seems to be no reason to bother updating this
element for either with infra very close to removing this completely
[1]. Error out on these platforms, and add a release note.
The 15 path should include the python2 and python3 packages, along
with the flags to do the "cleanup"; i.e. forced removal of distutils
packages that pip 10+ won't touch. As mentioned in the original
change, the six package causes problems here, but we can clear that
too by explicitly listing it instead of letting it come in via
dependencies. Again, this element will be removed from the infra 15
builds ASAP; but we can release with this to provide a roll-back point
if we need to revert the removal to fix things temporarily.
Add it to the testing path as well.
[1] https://docs.opendev.org/opendev/infra-specs/latest/specs/cleanup-test-node-python.html
Change-Id: I7a6a342461d6001c25e55638ba9b7438c28f2519
When I tried to build CentOS8 image for AArch64 I got error saying that
MBR is not supported. So make sure that it will not be used by default.
Change-Id: Ib67ab7f808d727c3c61932c540d398dbe723972f
openSUSE Tumbleweed is dropping python2-* packages so we need
to stop intalling them. We can also stop installing those
for Leap 15. which avoids a pip uninstall issue (as python2-six
was still built with distribute).
Change-Id: Ie93c8addb26aab3d0154c4b5b52423799abede91
I don't see anywhere we bring this in, especially on a minimal build.
In 2020 it seems like a base dependency, put it alongside
software-properties-common that installs the other apt helper bits.
Change-Id: I5b079eac4912cb4a164e9aa6158ed106a28f576c
We're ending up with "centoscentos" in the mirror location and the
build fails; strip out the $contentdir from the original too.
Change-Id: If09dbbd8028ea510d2ab0d3d8afe484cea611df5
If the running kernel of the system building the image
matches the kernel that is to be removed dnf will fail.
Repalce use use of dnf with rpm -e.
Closes-Bug: #1623409
Change-Id: Ie2481ea8a02b7b0720e46fa179f24badf4aa25c5
This element is designed to install latest minor versions of different
python releases, like py27, py35, py36, py37, py38
into stow directory, and later easily enable them with stow.
Change-Id: Iab6d20e7643e549b53c629fb430e58b1c5e72991
Sometimes an element needs packages installed so that it can
perform tasks but those package are not appropriate for the
final image content. Add a "build-only" flag to package-install-squash
which will cause package to be installed at the beginning of the
phase and then uninstalled at the end of the phase.
Change-Id: Ie01b795991710c93f6b669c8f14b57eb4412c1d5
All the platforms we care about now have python3 with venv (even
centos7 now) packaged somehow. Add an ensure-venv element to make
sure that "python3 -m venv" works. Any other elements that wish to
install non-distribution-packaged Python utilities can use this to
keep them separate from the main system installs.
Port glean to use this, and drop its dependency on pip-and-virtualenv.
Change-Id: Ic16f134fe34293bb68e7c632dd320f523366320d
This causes problems for other projects incorporating dib; we don't
have a specific need for a cap.
Fix a few issues, mostly spacing or regex matches. No functional
changes.
W503 and W504 relate to leaving artithmetic operators at the start or
end of lines, and are mutually exclusive and, due to "ignore"
overriding the defaults both get enabled. It seems everyone gets this
wrong (https://gitlab.com/pycqa/flake8/issues/466). Don't take a
position on this and ignore both.
Use double # around comments including YAML snippets using "# type: "
which now gets detected as PEP484/mypy type hints.
Change-Id: I8b7ce6dee02dcce31c82427a2441c931d136ef57
* Add "centos" element, a CentOS version-independent element. This is in
line with the same work done for RHEL in Stein cycle.
* Deprecate the centos7 element. CentOS 7 support itself it not
deprecated though. The new "centos" element provides the same support
level as the "centos7" element.
* Add functional testing
The default CentOS version is 8. You can adjust it using the DIB_RELEASE
environment variable.
Change-Id: I373ba2296c4613765676e59aabd9c651345298d1
in CentOS build case building an image with "iscsi-boot" and "dracut-regenerate" will exit building because of statement "[ "$found" = 0 ]"
Change-Id: I1a6d60e9ec5f5cb508866c8376465c3e73551a30
On IPA we are using efivar and efibootmgr, we already added the
packages on ipa-builder.
Adding the pacakges on diskimage-builder, so that people who use
it to build the images won't get into trouble.
Change-Id: I9ab6588f20302b4808b09dc060aced5fd267a3d2
Debian default Python interpreter version is 2.7, but it's
possible to install a Python 3 interpreter from the base
repository.
With this change, if we set DIB_PYTHON_VERSION to 3, we install
the python3 package from base, with python3-libs, python3-pip and
python3-setuptools, and redefine python_path, effectively allowing
Python 3 interpreter to be used in Debian.
See a result of the job for building the ipa image here:
https://review.opendev.org/705773
Change-Id: Idabfa94c2bff6e0de6daa0866084d5db14d7dcb0
When there is a hashsum mismatch diskimage-builder forces downloads
with the -f switch of cache-url. This is currently broken because bash
escapes the quotes in curl_opts. This tricks curl trying to download
'no-cache' instead of the url. This can be fixed by using an array for
curl_opts which does the correct thing here.
Change-Id: Id9f1579dda9a3e0a2b08dd5faaeef0e2e580d419
Add a basic test to ensure that all elements have a README.rst file.
This way they will be exhaustively listed in the Sphinx documentation.
Add dummy README.rst for 'disable-selinux' and 'rpm-distro' elements.
Change-Id: Ia5252ddd89b5ae5c6e9a12a66ef10f912fd54da5
CentOS 8.1 split repositories and GPG keys out into subpackages. This
broke DIB support for CentOS 8.
7e41cef41826a0d73ced
Change-Id: If3de6efa6074e059dc9fdd47c7bdc19d26d4d7f2
The hook inside extra-data.d runs outside the chroot when
building the image which means that we need to prefix paths
inside the hook to avoid running things on the host.
We also run it with sudo because if we're running DIB not
as root, /etc is uid 0 and we'll get a permission denied.
Change-Id: I1838890fe124c84c879285a471bcc78fe47d6c23
Make sure rngd, a hardware RNG entropy gatherer daemon, is installed on
all DIB-built Red Hat family distro images. rngd comes installed by
default in a typical base installation as it's proven to help speed
things up.
Nova attaches the virtio-rng-pci device to VMs. virtio-rng-pci is a
device that provides feed random data. However, it is of little to no
use if the virtual machine is not configured to make use of given
device. That is where rngd can help by facilitating entropy to the pool
from virtio-rng-pci.
$ openstack image set --property hw_rng_model=virtio [...]
$ openstack flavor set --property hw_rng:allowed=True [...]
DIB-built minimal images do not come with rngd installed. This patch
makes sure the daemon is installed. Its systemd service comes already
enabled.
Change-Id: I34a989dbfc57d4c98113ac25c81dfb500945ff0a
Some phases of diskimage-builder run outside the chroot environment,
such as the extra-data.d scripts, and don't have access to dib-python.
This means these scripts may choose the wrong python version by using
"#!/usr/bin/env python" to execute. The svc-map element is an example.
This patch creates a temporary directory and symbolic link for the
correct version of python, then manipulates the environment PATH
to preference the symbolic link "python" command.
This will allow elements with these scripts to work correctly with
the version of python diskimage-builder is running under.
Change-Id: I289d621e1bfbba0eb174dff977d1a5c92c04e4fa
Co-Authored-By: Ian Wienand <iwienand@redhat.com>
As described inline, Bionic hosts will build invalid Trusty images.
Hack around this by disabling metadata_csum in the ext4 mkfs.
Change-Id: Ibd67d58ca830a9e60605d0700ee2b17906c804e6
The base URL of EPEL repository installed by the epel-release package in
CentOS 8 at least now defaults to https.
The error seen when building an CentOS 8 image was:
"Error: Cannot find a valid baseurl for repo: epel"
This patch fixes it so that it will always match regardless of being
http or https.
Change-Id: I9ec5536ee72047c929a1ef6950ff4e9092842a4c
The ndisc6 package is not yet available in EPEL 8.
See: https://bugzilla.redhat.com/show_bug.cgi?id=1779134
Until the package is available set the pkg-map to "" for
the ndisc6 package when distro is redhat and install the
package using || true in the element script instead so
that CentOS 8 build's do not fail because of the missing
package.
Once the package is in EPEL 8 this change can be reverted.
Related-Bug: #1754219
Change-Id: Icd4bad8852ce5ba40fb0e7b0d335191efbe88c67
After the introduction of 'Add output for mis-configured element
scripts' we started seeing CI failures in tripleo where
instack-undercloud is being used (rocky/queens):
/usr/lib/python2.7/site-packages/diskimage_builder/lib/dib-run-parts: line 108: DIB_DEBUG_TRACE: unbound variable
INFO: 2019-12-02 16:24:33,423 -- ############### End stdout/stderr logging ###############
ERROR: 2019-12-02 16:24:33,423 -- Hook FAILED.
Let's make sure that by default the env variable is set
to 0.
Change-Id: I38c76c0edee436f1e7dd0c9a868cea1e6ee3271d
Closes-Bug: #1854904
Without this change, operating system elements that use the
zypper-minimal element always must use download.opensuse.org as their
repository source. This change makes ZYPPER_REPOS overrideable, which
allows the user to create custom operating system elements that can use
private repositories as their source for base packages. For example,
with only this change, it is possible to create a sles-minimal element
that generates a SLE 15 SP1 image just by overriding DIB_ZYPPER_REPOS
and DIB_OPENSUSE_PATTERNS.
Change-Id: I46e40fbe4408d4204056a27b182b21213f1176ff
On openSUSE Tumbleweed, the login.defs config file was moved under
/usr[1]. This change allows the login.defs config change to work for
both old and new locations.
[1] https://build.opensuse.org/request/show/736424
Change-Id: Ia5eff5e7b0709836278361b1b8daa788619eff75
If rdisc6 is available, a node using this element will loops until
DIB_DHCP_TIMEOUT is reached because of a missing 'break' when rdisc6
return code is 0.
This will mark the dhcp-interface@.service unit as failed (because it
has the same timeout) and not bring any network interface online.
Change-Id: I034dcda94d765f236950ebcbee36789f5bdc515f
Closes-Bug: #1854717
Signed-off-by: Hervé Rousseau <hroussea@cern.ch>
Support for easy_install codepaths is increasingly broken, and now
putting allow-hosts in this file breaks most recent pip. Just stop
installing the file - people should be using pip anyway.
Change-Id: I0a6b2432f81d80fbcbb336403fe555003880fa9f
When running under nodepool in a foreground, non-daemonized situation
without a tty (i.e. within a container) we're seeing this "wait" hang
indefinitely.
It is probably related to "outfilter.py" and output file descriptors,
although TBH we haven't completely root-caused it. I won't claim this
is a great solution, but it should hopefully let the dib process
finish and just die, where outfilter will disappear.
Change-Id: If78da54df3d4c240fee16aee4413ec554b37c1d6
The current implementation evauates the dib-init-system
script too early. Also it looks that there is no simple
way of getting the info about the init system automatically:
another element can install (later on) a different
init system. Therefore the only reliable way of setting
this is manual.
Change-Id: I6e9ffa1bdb3154f488f4fd335b197699b86aacd4
Signed-off-by: Andreas Florath <andreas@florath.net>
I commonly get asked for help when people are attempting to create
local image elements and they cannot get them to work.
diskimage-builder silently ignores element scripts that it doesn't
find to it's liking, such as non-executable or files with extensions
(.sh is a common mistake).
This patch extends the '-x' tracing flag down to dib-run-parts and
will cause it to print out helpful messages when these files would
otherwise be silently ignored.
Examples:
Ignoring non-executable files: 10-do-not-run-me
Ignoring non-conforming filenames: 10-I-can-run.sh
I am not enabling these by default as they can create extra noise
and require additional filesystem IO to produce.
Change-Id: Ic804efca3015c199440b4b10da951d71a815c64f
When the rdisc6 utility is available probe for router
advertisement. configure eni and rhel-netscripts interfaces
to do IPv6 address configuration according to the flags
in the RA recived from the router.
The systemd service file timeout is DIB_DHCP_TIMEOUT * 2,
so that DHCPv4 can timout, and dhcpv6 run before the service
times out.
Retries are commented in dhclient.conf, without it we end up
trying DIB_DHCP_TIMEOUT * 60 before the client move on to
IPv6.
WHEN:
Stateful address conf. : No
Stateful other conf. : No
THEN:
Do not run dhclient at all, autoconfiguration via
SLAAC only.
WHEN:
Stateful address conf. : No
Stateful other conf. : Yes
THEN:
Run "dhclient -6 -S", The ``-S`` option makes the
dhcp client not request an address, only other
options such as DNS servers and NTP servers from
DHCPv6 server.
WHEN:
Stateful address conf. : Yes
Stateful other conf. : Yes
THEN:
The dhcp client should request an address _and_ other
options such as DNS servers and NTP servers from
DHCPv6 server.
NOTE: No IPv6 support added for suse-netscripts
Closes-Bug: 1754219
Change-Id: Icdc79875c33f894ab7eaec8afdfb33a731efff99
Currently DIB_ADD_APT_KEYS only supports GPG armor keys, while
default Debuntu apt gpg keys are in keyring format.
Change-Id: I361c375e25b03a08b19052b10c6733939c8df921
This reverts commit a3e9e7f89e.
We still have some issues with vhd creation on RAX
In short, it appears that images fail to resize unless they have a
specific "creator" field. Revert this while we consider the options.
[1] https://bugs.launchpad.net/nova/+bug/862653
Change-Id: I2b6a3bfbfe28432fbb6a2ce4a0211939d224b8d5
The "ironic-agent" is copied to ironic-python-agent-builder and
hence it is deprecated from DIB.
Remove from functional testing
Change-Id: Ibc4f75b9d7e2a31994fc86d05bd57975f00fb74f
Task: 36198
Story: 2005114
This package is not installed by default on Debuntu, but is on RH
platforms. This is causing a build breakage as DIB_PYTHON_VIRTUALENV
tries to use this (I3414fb9e503f94ff744b560eff9ec0f4afdbb50e).
Add the package.
Change-Id: I9a551c57dd128bbb4b095c847f634c777b2cb553
To ensure dracut does not load nouveau we need to explicitly disable it via
omit_drivers.
This change adds a method to drop in arbitary dracut conf files to an element
which are picked up by dracut-regenerate and included in the chroot where we
run dracut.
The disable-nouveau element just adds a conf file with
`omit_drivers += " nouveau"`
The default dracut conf files in /usr/lib include a similar file to omit the
nvidia kernel modules.
Change-Id: I6375e4843fd08d1410141fbbd8658042dcd5ad05
Closes-bug: 1842664
Seeing this at the end of the tripleo overcloud full build:
99-selinux-fixfiles-restore: line 69: [: too many arguments
Change-Id: I8fb10f3d3d38723b41190ae1898757e6df073945
The vhdutil utility is completely dead; the whole subsystem it relies
on was removed with [1] so it's not even vaguely possible to keep it
up-to-date.
I took the .raw images on a nb and used the qemu-img there (so Xenial)
and generated some VPC images; uploaded them to rackspace and the all
seemed to boot fine. If there was a problem, maybe it's been fixed on
either the qemu or RAX side in the previous few years.
Thus swith to qemu-img to generate the vhd images too.
[1] https://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=5c883cf036cf5ab8b1b79390549e2475f7a568dd
Change-Id: I3099d2ebb958370fcec623087a093b2c8dbdc6c4
Add option to set the suite subpath after the release name for the
security mirror URL independently in the debian-minimal element,
since this can differ between mirrors.
Change-Id: I4cc8f54fba012986423e30e19bff276208b8ad62
With the introduction of centos 8 we have constructs like
if [[ $DISTRO =~ (centos|fedora) && $DIB_RELEASE -ge 8 ]]
This is intended to match the "centos7" element (from the =~) but it
was missed that this is setting the DIB_RELEASE to "GenericCloud".
I think it makes more sense for this to be a numeric release, and
makes constructs like above work. There really isn't any other type
of image to choose here; thus we move it into a new, centos7
specific variable.
Note that when the centos 8 images are available, we want to move to a
generic "centos" element that will handle both 7 and 8 together (same
as rhel) based on DIB_RELEASE and deprecate centos7; this works with
that environment too.
Change-Id: I2e6b7848070d6452c0563e2a122447627c6e6bf7
It turns out that this breaks ipv6 config with NM. Instead what we want
is for glean to not up interfaces on boot (see the depends-on).
Change-Id: I6c5bc76c433e29f02d3266ab8f669015125ec954
Depends-On: https://review.opendev.org/#/c/688031
This adds CentOS 8 into functional and boot tests.
This completes centos-minimal support, documentation is updated and a
release note is added.
Change-Id: I435c2967b4f49faeb6d6edf189907b9f96e80357
As described inline, NetworkManager and dhcp-client make up the basic
networking for centos 8 installs; bring them into the base image.
Although in infra we then use simple-init, some other users find this
helpful.
Change-Id: Ib9f32e73bf9109cc1b659fe1deceb1a15301ffeb
By default network-scripts package isn't installed, so the directories
for these files don't exist either. Skip by default for Centos 8.
Change-Id: I194ec3735e17f27e586386541dc51f775b01e510
Use the wrapper calls from Ia267a60eecfa8f4071dd477d86daebe07e9a7e38
to install glean.
Using this wrapper means we cover all cases without more and more
branches; it should work for python2, python3 and also the special
case of RHEL/CentOS where dib-python points to the special
/usr/libexec/platform-python (which is python3.6 with inbuilt pip)
Change-Id: If624e8bb66ce0761fc0d5f34c2bed8b93a7daeee
NetworkManager with simple-init has proven to be stable in OpenStack
infra, switch to it by default for CentOS and Fedora. For CentOS 8
and Fedora, add a check to make it the only option. Thus only CenOS 7
remains optionally using the legacy scripts; this is likely not used
anywhere (infra is really the primary user, where NetworkManager is
already used); we can likely remove this variable (and hence path) in
a future cleanup.
In the setup, remove rhel7 element which was never really tested.
Reorganise the fallthrough to call out the default paths as doing
nothing.
Change-Id: Ic996956da4b85f7d95179b8df9881d5f52c091af
Currently, the serial console is hardcoded to ttyS0 in the bootloader
element. This is a challenge for users that want to build images for
some baremetal servers. Supermicro servers, for example, use ttyS1 for
the serial over lan interface.
This patch adds a new environment variable DIB_BOOTLOADER_SERIAL_CONSOLE
that can be set to override the default.
Change-Id: Ie8173be8690ac0b7164ce9e5b66d3c1c18f844d6
Add option to set the security mirror URL independently in the
debian-minimal element, since this can not be overriden by the
standard DIB_DISTRIBUTION_MIRROR variable.
Change-Id: I145844a410d06a479e68db1bf6d5d0159389305c
As described inline, deprecate the "source" install for CentOS 8.
Overwriting the packaged tools has long been a pain-point in our
images, and the best outcome is just not to play the game [1].
However, the landscape remains complicated. For example, RHEL/CentOS
8 introduces the separate "platform-python" binary, which seems like
the right tool to install platform tools like "glean" (simple-init)
with. However, platform-python doesn't have virtualenv (only the
inbuilt venv).
So that every element doesn't have to hard-code in workarounds for
these various layouts, create two new variables DIB_PYTHON_PIP and
DIB_PYTHON_VIRTUALENV to just "do the right thing". If you need is
"install a pip package" or "create a virtualenv" this should work on
all the platforms we support. If you know more specifically what you
want (e.g. must be a python3 virtualenv) then nothing stops elements
calling that directly (e.g. python3 -m virtualenv create); these are
just helper wrappers for base elements that need to be broadly
compatible.
[1] http://lists.openstack.org/pipermail/openstack-infra/2019-September/006483.html
Change-Id: Ia267a60eecfa8f4071dd477d86daebe07e9a7e38
Don't install the "yum" package, which is a backwards compat around
dnf. With 687003f we should not need the backwards compat links any
more.
Add libcurl to avoid conficts with in the curl "-minimal" packages
that happens on CentOS 8. But skip it on Fedora, because it seems to
create more problems there (not going to pretend it isn't all a
hack ... but it seems to work).
Change-Id: I1de2703eb5075a0a22837b6898bd8eb960d080dd
A few places we either assume centos uses "yum" directly, or have
switching based on the distro type.
In both cases, we can use ${YUM} directly to avoid ambiguity
Change-Id: I71095a9bd1862f8956b5982fbbb3e1d213926c14
The libselinux packages etc don't exist for Python 2 on Centos 8 [1].
Ensure the package map installs the python3 versions.
We could probably invert the logic now, and make it so Centos 7 is the
"special" version that overrides things to install python2. Left
alone for now to avoid changing too much at once.
[1] https://bugs.centos.org/view.php?id=16458
Change-Id: I944cf4f2902c28728aa5bb9e2a00b3eef122d52e
CentOS 8 has the "new" split-up locales packages. Fedora 24 is now
long gone, so take out the old branch and apply the lang package
install to Centos 8 as well.
The manual locale cleanup is not necessary on Centos 8; skip it.
Change-Id: Ib65fc15fe471348793fd6efb034517f11abd905e
The repo format has slightly changed for CentOS 8 (s/os/baseos/).
Make the chroot builder look for a more specific repos.d directory
first named for the distro variable, then fall back to to top-level
dir (this avoids having to constantly change fedora).
Update the gate mirror setup and roles for new Centos 8 paths too.
Change-Id: I5b7f0c3624cac1d7aa7ed8bf6286b85d808b9c9a
This is no longer a valid option for dnf, and it puts out a lot of
warnings constantly about the invalid entry [1]. Remove it.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1653831
Change-Id: Iba0585cab3e5e78e9324196f276b2341e7bb9e3c
Install the Python 3 libselinux packages for Fedora platforms. I
think this is the right choice; Fedora is a Python-3 only distro so we
shouldn't default to installing the python2 libraries.
This has a practical effect if you're using Ansible with
ansible_python_interpreter=/usr/bin/python3 as it needs these
packages.
There is some small chance of breakage if you're using Ansible still
with Python 2, I guess. In infra I notice we bring this in with
"zuul-worker" project-config element. On balance, I think that if you
need the Python 2 packages for some reason, it should be a special
install and not part of redhat-common.
Change-Id: Ibcec0b3660d01b861838c2ae87ca43d98953ce32
Two bugs are addressed.
1) The sysprep element was broken in that it only truncates
/etc/machine-id, but not /var/lib/dbus/machine-id. systemd will
not generate a new machine-id if /var/lib/dbus/machine-id is
present[1], it will simply copy it to /etc/machine-id.
We observed machine-ids being packaged in /var/lib/dbus/machine-id
on several distros: Ubuntu Bionic, Fedora 29, Debian Stretch.
CentOS 7 and Ubuntu Xenial do not contain packaged machine-id as
far as I can tell.
All test builds were performed using -minimal elements.
2) A second bug existed where debian-minimal did not run the sysprep
element at all, so a stretch image I tested contained a populated
/etc/machine-id AND a populated /var/lib/dbus/machine-id.
[1] https://www.freedesktop.org/software/systemd/man/machine-id.html#Initialization
Change-Id: Ibb28b6e90d966a845de38a2cd5a1e8babd2604bc
Similar to https://review.opendev.org/#/c/663693/, the x64 packages
should be used for x86 architectures.
Change-Id: I5e8a4d58e96d65eb60fc539b8a1d56853b12faac
Closes-Bug: 1843820
linux-firmware and linux-firmware-whence (meta package for mostly iwl
firmwares) packages account for approx. 289 M install size on a F30
system, and linux-firmware for approx. 176 M on CentOS 7. Users needing
these firmwares are eventually baremetal users and are not looking for a
very minimal operating system base install like virtual image users are.
Thus, a non-minimal OS element is better suited for them. Alternatively,
it could be later considered a dedicated firmware element.
This is inline with I8ce65e1d357d15e8ed8995ad1dcaea02bbd1986f.
Change-Id: If104fc3c1e9349b8d501a2351fff1ab4c0dbc6a4
This is consistent with the previous simplication of
build targets in the opendev environment to refer to
"opensuse15" being the alias of "latest stable openSUSE Leap 15.x".
Change-Id: I904a3ca0d6dbddd2bb1a673836ab6a0ad249526d
Add a new environment variable $DIB_GZIP_BIN allowing builders to
specify a different gzip (such as pigz) to be used when compressing
tgz images.
Change-Id: Ifb617568140a149e2fda241e07ff8a59429e6697
We have an application breaking because /usr/share/cracklib is being
deleted from the image. The application installs its dependencies,
including cracklib, but since yum shows that cracklib is already
installed, it does not reinstall it.
Change-Id: Id6fccf76c706dbc6c2124abcfd12c1f10cef5e09
Newer openSUSE distributions install an absolute link to /run/netconfig
as /etc/resolv.conf in $TARGET_ROOT. as that points outside
TARGET_ROOT, we unintentionally wipe the system resolv.conf here
and break our ability to finish building the image.
Change-Id: I9d5aaa9fad2f81dcabfe19e2f1e6b6e50af597d7
This is a follow-on to I475a253091cbaf63687b91c748c31a6753bb0f57 as we
are still seeing issues on some clouds with unconfigured networking.
We increase the timeout, but also make it configurable so we can
fiddle it without a dib release in the gate.
To follow-on from the experimentation done by clarkb, I can confirm by
emperical testing on a Centos 7 image (from today, today being this
change's date) that setting
net.ipv6.conf.all.autoconf=0
by itself is "fatal" and the interfaces do not come up; i.e. nm does
not by default seem to re-enable ipv6 for the interface. However,
explicitly adding:
IPV6INIT=yes
IPV6_AUTOCONF=yes
to the interface file *does* seem to make it work, even if
"all.autoconf=0" is set (then again, there's also bugs about the
effect of this [1]). However, no extant distribution (I can currently
find) does anything like this by default.
If this continues, this may be an option. Another might be to avoid
the use of the nm-settings-ifcfg-rh profiles and move directly to nm
ini files with glean.
[1] https://bugzilla.kernel.org/show_bug.cgi?id=11655
Change-Id: I869ebffc8cde3bbff573f6583fd9dd02a5598590
Upstream is now publishing 17.1 profile systemd stages
Also updates the docs that were forgotten in the last patch
Change-Id: I0f2e7976845b1d3c55ffe8869eec0bc04a191252
As described inline, we need to ensure the underlying directories in
the image are correctly labeled, or we get all manner of services
failing during boot with selinux in enforcing mode. Although the
problem is generic, this first shows up in Fedora 30 as systemd has
become more strict about namespace failures (I think) [1].
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1663040#c22
Change-Id: I52c1cc719884879169b606b00651aa26f5b783f1
This patch adds option DIB_YUM_MINIMAL_EXTRA_REPOS to yum-minimal to
allow DIB users to include extra repositories to their final image.
Change-Id: I89549f4b0f4c9470143b5064817acab5043e31c5
Something (possibly [1], but that change is at best cryptic) has
changed such that we don't get correct /etc/os-release files
installed. This flows on to grub half-installing itself, enough to
not fail the build but not enough to make something bootable.
Installing the -cloud release package gets it back, and seems like a
sane choice for dib.
[1] 617b1bed34
Change-Id: Iff0413887fad798273b2bfcb140cc07f36d54a04
As noted in the change, 7fd52ba841
increased the size of the EFI partition considerably. This has meant
that our padding upwards of the disk size is insufficient and EFI
builds (arm64 in particular) is failing due to out-of-disk errors
during final image operations like installing kernels.
Similar to the discussion we had in
I65fa13a088eecdfe61636678578577ea2cfb3c0c, this feels a bit ugly
because we're mixing logic here with sizes specified in block-device
config files. But it boils down to the same problem; we are
calculating the disk size here and passing it to the block-layer, so
unless we want to make large changes to the status quo about where
these sizes are calculated, small adjustments here are the most KISS
solution.
Thus we check if we have selected the EFI bootloader element, and thus
assume there will be a large system EFI partition and expand the disk
size accordingly.
Change-Id: Ifa05366c2f2b95259f3312e4dde8c85347075ba1
This debug statement lists every element found and its dependencies on
every build; it's just noise unless you're debugging the element
dependency solver itself. Remove from output.
Change-Id: I9281b953d958a3fd5e20edbc560a341a2fcc3deb
This seems to miss the exit code of the dracut process, which actualy
caused some issues in I8511669e188717494daf2bc1384a6dd346f942a4 where
it would have been much clearer to stop after the initramfs generation
failed.
Add some debug messages, and catch any errors from the final call.
Change-Id: I6f89441ec4709f5199535e15a7cc53a3a8af273d
Should install "grub2-efi-aa64 grub2-efi-aa64-modules" instead of
"grub2-efi grub2-efi-modules" for arm64
Change-Id: Iee3191b0944b3b862890d166a9d36bd592fe8f7e
Closes-bug: #1839816
- DIB_DISTRIBUTION_MIRROR_UBUNTU_IGNORE matches when it is empty or not
set and DIB_DISTRIBUTION_MIRROR is being used. Checking for it being
set and not empty solves this.
- Normalizing bash conditionals for readability
Closes-Bug: #1808359
Change-Id: I87853fcda4c8b29a3f1720a2778debeb3acc3a53
Signed-off-by: Manuel Torrinha <manuel.torrinha@tecnico.ulisboa.pt>
The 'pypi' mirror element is generating invalid pip.conf files
when more than one "DIB_PYPI_MIRROR_URL" is specified.
This patch fixes the pip.conf file rendering to use a proper form
when there are multiple "extra_index_url" provided.
Closes-Bug: #1839558
Change-Id: Ibda0e7390955683560e09b486f636775643ff57c
python 3.6 warns about regexes like:
DeprecationWarning: invalid escape sequence \+
I noticed that debugging a trove job and it really led me in the wrong
way. Fix this with making it a raw string.
Change-Id: I58ee1a49d62316c6c3f0588832c97f659f7e460b
Per the inline comment, a machine-id is required for kernels to
install correctly (this may well be a bug, but the linked issue
remained inconclusive).
Add a call to make the machine-id before install packages.
Change-Id: If75d04376e62bfdfe14ee3ca4d0bd5c8b383c1b0
Redhat-Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1737355
The 17.1 profile changed the defaults used in portage for where we store
our repo, distfiles and binpkgs. Some portage related variables need to
be set deterministically. 17.1 is no enabled for Systemd's profile.
Change-Id: Ib55f6875c5cb461c3c530b51d7420ce3dc8da360
This element configures systemd to send its journal to the console,
which can then be retreived by server commands. In the case of
nodepool, if the image failed to boot the console will be dumped into
the logs when nodepool decides the node is not responding. Having
this can be very helpful diagnosing early boot errors.
Needed-By: https://review.opendev.org/#/c/669787/
Change-Id: I6b6df7023acb6b2f967b84840bc4b542ebc03727
Newer versions of open-iscsi seem to compile on Gentoo / musl. Use them
if we can. This also removes the cap on open-iscsi.
Change-Id: I596cb61494e459a419bce6a63deff89f9e78fe23
Previously we were trying to enable dbus-daemon service on all prior to
fedora 30. Unfortunately 28 and older don't have this service so this
broke those releases and only worked for 29. Fix this by only enabling
this service on fedora 29.
Change-Id: I1bd15dcf0bbe270afccb0c0c3ea6ad08862a53f1
The linux kernel and NetworkManager fight each other over control for
interface management when router advertisements are in use. Long story
short if the linux kernel configures a network interface for ipv6
before NetworkManager attempts to manage that interface then NM will
ignore the interface and not configure ipv4 on it.
This can happen because the kernel is configured to send router
advertisements solicitations which result in router advertisements which
the kernel uses to configure the interface(s). There is a default of a 1
second delay before sending the solicitation which in many cases is long
enough that NM has started before then. However, in slower environments
like those used for testing with qemu this isn't long enough.
Some testing by hand indicates that 15 seconds is about right so
increase the delay to 15 seconds via sysctl.conf.
Note this may increase boot times in ipv6 only environments (though it
is hard to be sure due to how systemd starts everything at once and does
socket activation and the like).
Change-Id: I475a253091cbaf63687b91c748c31a6753bb0f57
When virtualenv and setuptools gots installed from source and rpm
then their installation path lives at different places but when
the python script got called then that time it choses either of
rpm or source based path on system wide installation and leads to
different failure as their methods are not implemeted.
So by setting _clear_old_files to 0 will install
python3-virtualenv python3-pip python3-setuptools from rpms only
and avoid these failures.
Change-Id: I0c162f1fe8168513e352546ab8dd2b68fa65b88c
Signed-off-by: Chandan Kumar (raukadah) <chkumar@redhat.com>
autounmask=y (default) changes portage depsolving, causing errors
(mostly often seen in perl and binpkg related issues).
Disabling this functionality for DIB builds is OK as the enviroment is
not passed on post build and the build process is not interactive
anyway.
Change-Id: Ife9ace246bec16864ee4982bc456763af5dff2e8
Signed-off-by: Matthew Thode <mthode@mthode.org>
debian-minimal depends on debootstrap which depends on dpkg
This needs to be installed early as dpkg installs the apt keys early via
02-add-apt-keys in pre-install.d
Change-Id: I8580849ceaa7a5152c94f29afa890ac6d6983fb1
This change removes useless statement accidentally added in the
06576a02f0
Change-Id: I7ea4a24d8c72c9e72f5f87247403af0f9bf69b40
Signed-off-by: Maksim Malchuk <maksim.malchuk@gmail.com>
There are several jobs depending on working opensuse 15.1
images in nodepool, so it makes sense to ensure its working.
Also upgrade the previously marked experimental opensuse-15.0
job as it tests the xenial->opensuse combination, which is
particularly difficult to keep working and we'll need it in
the CI.
Change-Id: Icb6d998756ce5221e017959dcb59b21f0f023454
This patch adds a new environment variable to the ubuntu-minimal
element called DIB_UBUNTU_KERNEL that allows you to specify the kernel
meta package that will be using to install the kernel inside the image.
It supports "linux-image-generic" (The default), "linux-image-kvm", and
"linux-image-virtual".
This allows building images that are smaller in size (~200MB smaller
qcow2) that have only the kernel modules necessary for virtual
machines.
Change-Id: I8ce65e1d357d15e8ed8995ad1dcaea02bbd1986f
1. Sync sphinx dependency with global requirements. It caps python 2 since
sphinx 2.0 no longer supports Python 2.7.
2. Update some URLs to latest
3. Remove the unnecessary space
Change-Id: I5464be9e055feecd80918f691448acf5f100e701
Use openSUSE 15.1 as default, which is the latest released stable
openSUSE release.
Remove leftovers for unmaintained openSUSE 42.2 images.
Depends-On: https://review.opendev.org/#/c/660126/
Change-Id: I0b204b7b3d7ae74b6749320b3bfe1ca89d154ebb
This patch removes the check and default for rhel 8 requiring
xfs filesystem as rhel 8 images can successfully be built with
ext4 filesystems.
Change-Id: I1a6bfa26324fd43ae0c77c2c977dda0dd56e26e5
Nowadays, in the time of Predictable Network Interface Names, the
network interface names 'ethX' are not used that often any more.
Depending on the virtualization layer and the guest OS names like
'ens3', 'enp1s0' or 'enp0s31f6' are used.
This patch enables the user to set DIB_NETWORK_INTERFACE_NAMES to a
list of network interfaces which are brought up using DHCP during
(first) boot.
Change-Id: I04cc2ee710f0389a8085b1c91d9329784cb28048
Signed-off-by: Andreas Florath <Andreas.Florath@telekom.de>
The latest Fedora/Ubuntu images don't ship python2 by default, so we
need to use our dib-python wrapper for this so we work in python3 only
environments.
This change also correctly creates the pip.conf and .pydistutils.cfg
files with trusted host extracted from the index-url.
Related-bug: 1577105
Change-Id: Ibb5348af3e3bbe46b19affe90a8930a4b4ad4cad
Signed-off-by: Maksim Malchuk <maksim.malchuk@gmail.com>
RHEL8 ships a bunch of grub2-efi-X-modules in its main
repository, each of which provides grub2-efi-modules,
potentially causing nondeterminism when building images.
This changes the DIB elements to always use architecture-
specific RPMs when RHEL8 is selected.
Change-Id: If94f3721195d5ecd80036e4234a3ca223a19c349
Related: https://bugzilla.redhat.com/show_bug.cgi?id=1716672
When I said in I8594d1fe05242f246a5809740a115ab2f84ac5a3 that 12 MiB
ought to be enough, I should have expected that I would be proven wrong.
While 12 MiB is enough to fit shim-x64 and grub2-efi-x64, yum fails to
update these packages to newer versions:
Transaction check error:
installing package shim-x64-15-2.el7.centos.x86_64 needs 7MB on the /boot/efi filesystem
installing package grub2-efi-x64-1:2.02-0.76.el7.centos.1.x86_64 needs 3MB on the /boot/efi filesystem
Error Summary
-------------
Disk Requirements:
At least 7MB more space needed on the /boot/efi filesystem.
It is recommended that the ESP partition be much bigger. This commit
bumps its size to 550MiB, following guidelines from Rod Smith to avoid
incompatibilities with some EFIs [1].
[1] https://www.rodsbooks.com/efi-bootloaders/principles.html
Change-Id: If9515234f1a803cda32b2482f8abe10ddf0e6d26
Avoids failing on the first attempt to download the image to cache as
mirrors hosting them can randomly go down, usually with a connection
refused.
Change-Id: I9de9f33c2cc16596d04b35c4eb92621e6a2c7511
When the mirror returns a error, it was trying to interpret the error
message (e.g. <html><title>Internal server error..) as a download link.
By using -f on curl we get an empty reply and an exit code, which, as
we run in set -e mode, aborts.
Change-Id: Ibaa39aedb7db286f859c4b090114c6a233b150c7
The rhel7 element is deprecated and is left only for backward
compatibility.
The rhel element should be used instead. Users should set DIB_RELEASE to
'7' to indicate which release you are using.
The new element is a version-less RHEL element to handle both '7'
and '8' DIB_RELEASE, which aligns with other elements which operate in
the same way such as the Fedora element.
Change-Id: Ic39ed85cacae9942448eb18ad685763f9369c2ed
Make a version-less RHEL element to handle both '7' and '8' DIB_RELEASE.
The element usage should align with other elements which operate in the
same way such as the Fedora element.
Additionally, this patch adds support for RHEL8 that operates with
Python 3.
As of now, users of diskimage-builder will still be able to use the
'rhel7' element, or migrate to 'rhel' and specify their respective
DIB_RELEASE value.
* mount the xfs file-system for extraction as read-only. vaguely
based on explaination in [1] and the fact we only read the image
data into a tar, so can ignore this.
XFS (dm-1): Superblock has unknown read-only compatible features (0x4) enabled.
* Use the redhat system python as the dib-python version. dib was
ahead of it's time making an abstracted python interpreter for
system work ;) the system python should work for running the various
dib element scripts.
[1] https://unix.stackexchange.com/questions/247550/unmountable-xfs-filesystem
Redhat-Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1700253
Co-Authored-By: Ian Wienand <iwienand@redhat.com>
Change-Id: I90540675c70bb475d9db2ae24f81c648a31f3f95
I want to use the new --image-extra-size flag[1] but my use-case
calls for megabyte granularity of this value. Rather than adding
60% to an 800MB image, maybe I only want to add 100 or 200MB, etc.
[1] https://review.opendev.org/#/c/655127/
Change-Id: I8fb9685d60ebb1260d5efcf03c5c23c561c24384
Use openSUSE 15.0 as default, which is the latest released stable
openSUSE release. Switch to https for accessing download.o.org
as encrypted transfers should be used by default.
Remove leftovers for definitely unmaintained openSUSE 13.x images
and split into old/new leap style versioning scheme for clarity.
Change-Id: Iab129eeee2b1a2563f0f0d2cb17bbad57c068e38
It looks like fedora-release on fedora 30+ has been split into sub
packages. Use fedora-release-common to avoid package conflicts.
Change-Id: I8f8711044fc4074b91939e0a6dfdac4d7a14a35b
Signed-off-by: Paul Belanger <pabelanger@redhat.com>
