We currently use qemu-img convert with a raw source and dest when
building raw images. We can just mv the file for increased speed.
Change-Id: I3da095cb9ecad7224a121a434a9fb204132bf6df
Deprecated the `--expand-dependencies` flag from `element-info` usage.
The flag was required and not optional. We can rely on argparse to exit non-0
when the required positional argument is not provided.
Change-Id: Iaf8eb962eb600760974bc33c30b809a07a23278e
Closes-Bug: 1265649
When building the ramdisk we don't cleanup the temporary
directories after ourselves. This leaves /tmp/image.* directories
mounted and /tmp/image.* directories on the system.
Also the ramdisk-functions duplicate, from what I can see,
the cleanup function from common-functions. So when a job
is killed off it ends up leaving /tmp/image.* directories
on the system.
Change-Id: I2d73aabd0eb176027b4e7368580db08902e2b6ab
ramdisk-image-create assumes the presence of vmlinuz file in OS image.
But ubuntu PPC LE images have only vmlinux file. This patch adds
support for using vmlinux file.
Change-Id: I5dd0b8ceb46b73be57d4c15b39b96f99b524fa3f
Closes-Bug: 1413362
I would like to recommend to use + instead of \; in the find
command. As this will ensure the removal of all selected
directories in a single invocation.
Hence improve the speed of deletion.
Change-Id: I409fe11aae217afb6f790491591005c679264ed4
The element builds dracut from source on Ubuntu because the
Ubuntu dracut package is broken and very old, so it can't be
installed properly and causes a number of other issues that
are fixed by using a newer version of Dracut.
This initial version should work in virtualized environments.
Further validation of its suitability for real baremetal
deployments will need to be done in the future, but this should
be sufficient to enable that work.
Regarding Dracut specifically, in order to limit the changes
needed in the existing scripts this element continues to use a
cut down version of the /init script that we were building for the
existing ramdisk. However, instead of running it as pid 0 it is
run as a Dracut pre-mount hook. This allows Dracut to set up all
of the hardware and system bits, while falling early enough in the
Dracut sequence to complete the deployment before Dracut would try
to boot off the hard disk.
bp tripleo-juno-dracut-ramdisks
Change-Id: I144c8993fe040169f440bd4f7a428fdbe3d745cf
Until now there was a possibility for two elements to install hooks
with the same name, so one of them was overwritten. Change logic to
copy the hooks and fail in case one with the same name exists.
Change-Id: Ic2c46835b27c9319f7a889ffd0ccf3f5ccc1f0cd
Closes-Bug: 1251952
After being deprecated two releases ago, finally remove any reference
for the support of first-boot.d
Change-Id: I08d67404ef48cad61db3b18fb86e970abfa5d2b6
There are some situations (use of libpam-tmpdir) where the $TMPDIR is
defined per user, so any sudo call will define an specific $TMPDIR for
the root user which doesn't exist inside the chroot.
Change-Id: I866651fed520007506c7be83837d3791ed9f2235
Closes-Bug: #1330290
When uploading images to multiple clouds it is possible that the same
image will be needed in multiple formats to accomodate hypervisors
across clouds. Update disk-image-create's -t flag to take a list of
desired output image formats so that a single disk-image-create can
output all of the desired image formats.
Change-Id: If121b2342ae888855ba435aa3189f039e985b812
qemu-img convert can take a few minutes to complete, or far longer
on heavily loaded systems. Notify the user that the image is
undergoing conversion to save them just seeing END PROFILING.
Change-Id: I1ad61ce5ed011b721d48e2d12fb42ef4aa5cd1f6
If we entered the cleanup trap due to exit with an error code we should
exit dib with an error code.
Change-Id: Iee1a05668b3239113fb91a2da0d9a66d7de4db6b
A user reported symptoms where the losetup line used to detach the
loopback device was failing in tar mode. We don't need to detach a
device that does not exist.
Change-Id: I807996e16199288927b49b4f300ae9b461cb8fe7
Closes-Bug: #1378033
Finding the Debian boot kernel and initrd is collapsed into a
single statement so that the script doesn't bail out when
'set -o pipefail' is set and the *generic kernel and initrd are
absent.
Change-Id: Ifd616818f7387e6f102636c7cf186be6097f1d5c
Closes-Bug: 1335016
When running inside a Docker container, we cannot rely on devices in
/dev/mapper to be automagically created by udev, because we probably
don't have a udev at all. To work around this, run dmsetup mknodes
after every kpartx run.
Change-Id: If7e30579224ce54c5ed26d08974d8293c144719a
For some of the scripts, the unversioned name is not
good enough. so determine the link target of "vmlinuz" and
"initrd" to get the full versioned path.
Change-Id: I52f9b5435fafaf7925e2332058a9e41b26478f1c
Now that dib-run-parts has been moved to the dib-utils project, we
need to update diskimage-builder to use it instead of the version
directly in diskimage-builder.
This change removes the old copy of the dib-run-parts script in
the element, adds dib-utils as a dependency of diskimage-builder,
and updates the uses of dib-run-parts to correctly handle the fact
that it is now external to the project.
Requires I0be1f876d0e4a7d38e0d5c6010a552a8ebb158a4
Change-Id: Ia0a0df7784a14c49b5c47ac0b03e6c2602c84b3b
We need to be able to do install.d like things for ramdisks
themselves, but install.d runs outside the ramdisk context - and its
likely to break peoples brains if we mangle the two together - so this
adds a new hook point, ramdisk-install, specifically for installing
things into the ramdisk.
Change-Id: I37d1660309cda6e28bd0b316b08f61db4e080613
Optimized the creation of directories by using the Brace expansion mechanism.
And corrected the dirname resolution to follow correct convention.
Change-Id: I048c04385d2706c4e38f8548555a59b0437e1fcd
The two duplicated functions, save_image and finish_image will move
an existing image out of the way if it exists, but it isn't
configurable. Check an environment variable is 0 before doing so.
Switch save_image to just calling finish_image, rather than
duplicating its code exactly.
Change-Id: I26a5a8fa4b6e853c9440bffab195b0bc3728be40
Add a --options flag that allows disk-image-create to send custom
options to qemu-img calls. It is useful for forcing compat into
qemu-img created images.
Usage:
disk-image-create --qemu-img-options compat=0.10 base ubuntu
Change-Id: I73ee2c86abc115220d51ffebbbe9ce3c4d92f188
Closes-Bug: #1329746
On Debian, /lib/firmware is provided by optional packages like
firmware-iwlwifi or firmware-linux-free. That's why this directory
may not exist.
This change ensure the directory exist before trying to copy it
content.
Change-Id: Icf9eedf4148141c92e9171f16ae744b88a8d8519
The script to find best kernel from image (used by vm
and baremetal element) is duplicated and is not in sync
with each other. Moving the code to img-functions as a
function will reduce duplicated code and make it reusable
in future.
Since img-functions is not accessible in chroot env,
kernel selection is being moved from finalise.d to
cleanup.d in the vm element.
Change-Id: I8fbccc13a2c61a5191ef9ea5d2a8302a3e43b000
If we have the old image file with same name as new image file
we shouldn't rewrite it, just need to rename old.
Uses date number in old image name.
Fixes TODO in lib/common-functions
Change-Id: Ica58a0f4435217912bddf950322299d2ed2889f3
Ensure the return code of element-info is actually checked by moving the
export IMAGE_ELEMENT to the subsequent line.
A recent change (Ic0a061995e2ae708c95a535cba6237bff58f7d93) exported the
IMAGE_ELEMENT variable. This caused the return code of element-info to not
actually be checked, since the export command is now checked instead and
almost always will return 0.
This caused a misleading error message when using diskimage-builder with an
unknown element since the script didn't exit when it should have:
$ bin/disk-image-create -a amd64 foobar vm
Building elements: base foobar vm
ERROR: Element 'foobar' not found in 'bin/../elements'
Expanded element dependencies to:
Building in /var/tmp/image.DuIDY1lW
Please include at least one distribution root element.
Change-Id: I3d9c02bf0b1a4f320280185dd3fab0697d2c92f2
Adds a new pkg-map element which can be used to install
packages based on an in element 'pkg-map' JSON config
file format.
As part of this change we expose DIB's IMAGE_ELEMENT variable
so that we can have access to the element names which are being
installed in a clean manner.
This change is intended to decouple elements from DIB
and allow new elements to support multiple distributions
(with various package naming schemes) without having to
constantly maintain DIB's various bin/map-packages files.
Change-Id: Ic0a061995e2ae708c95a535cba6237bff58f7d93
