If you have an EFI host but the image doesn't have the EFI modules
installed the grub-install command will fail in case the --target
argument is not set. The problem is that the grub-install script will
check whether the /sys/firmware/efi file exists or not to determine if
it's an EFI installation, but this value comes from the host, so this
patch will look for the /sys/firmware/efi file and will also check if
the EFI modules are installed in the image, if not set the --target to
a non-efi platform.
Change-Id: I4481b43e4a8fe4144be9c7eb9d9c618bbb2df21e
Many python extensions are built from source each time an image is
built. Repeating these is wasteful, so ccache is employed to eliminate
that waste. A cache dir outside the chroot is used to speed up
subsequent image builds.
Change-Id: Ib73563ddbe5f3be7454bfc54ab91cedb559a1304
Before each phase dib-run-parts will pick these up to setup the
environment for the commands it runs.
Change-Id: I56697d7bc370918d4063eee67a1c35d4988a5359
The URL to download the Fedora 19 images is not persistent anymore,
they are now download from http://download.fedoraproject.org where the
request will be redirected to a different location. Passing the -L option
to the curl command will make it redo the request on the new place and
download the image correctly.
Related to bug #1199237
Change-Id: Ib9b9d65734992e2bf1a6888c5f2eb9de366f8204
On Fedora 19, there is a delay between the time loop0p2
is created to the time it is ready to be mounted.
This patches waits for 5 seconds for /dev/mapper/loop0p2
to be accessible. If it is not ready then the script
exits with status 1.
Fixes: bug #1197340
Change-Id: Iff0cfd0566673799a77500e0e24954f5f3743a17
When downloading the base image for the first time, the response
test expression fails with '[: 200: unexpected operator'. This is
caused by using '==' in the test expression, which is not supported
in sh scripts.
Fixes bug 1195030
Change-Id: I66260814cb591371dc5c10f8436f90c2f18d78cf
Add "NONZEROCONF=yes" to /etc/sysconfig/network to prevent
169.254.0.0 route from being created. This route interferes
with fedora baremetal nodes' access to the nova metadata
server at 169.254.169.254.
Change-Id: Iad77abfc97c0eba944680772f233389481a270ff
On fedora 18 the package pyOpenSSL is conflicting with one of the
packages needed to build the bootstack image. The problem gets sorted
if you install pyOpenSSL at the beginning of the image building process
and this is what this patch is doing.
Change-Id: I681683b81ad638dfeb690fde1bc7d08a2116aaed
Use the new source-repository interface to git clone
source repository.
Also there was a few thing in this element that needed to be fixed.
o url to the git repo wasn't curren't.
o pip and git are also dependencies that needed to be installed.
Change-Id: Ieb7be6576fc909aa4bba0233b7b81cab03395d76
Git isn't a dependency of this element, but is a dependency of pbr
if you are doing pip install on a git cloned directoy, because this
looks to be a fairly common pattern it makes sense to have git on the
target image.
Change-Id: I49ee3fa4eac493b9dfa379a674ab9b3390cfc89a
Commit cc5ecb4e9c switched from using
run-parts in favor of dib-run-parts.
/usr/local/bin isn't part of PATH on Ubuntu causing
"/usr/sbin/dib-first-boot: line 8: dib-run-parts: command not found".
Change-Id: Ia7e401221add197edf880af82e0148f3ba7d2b9c
The fedora element downloads images too, so we should re-use the caching
code from the ubuntu element.
There doesn't seem to be other examples of code shared between root.d
scripts. In the fedora and dpkg elements we copy install-packages into
the chroot, but that model doesn't apply when we're running scripts
outside of the chroot. Seems sane to just run it directly from the bin/
dir in the temporary hooks directory.
Change-Id: Iaa6aca660042fea323cab4271633a4bdbbc271b8
If a cached copy of the file doesn't exist, cache_url() passes a
non-existent path to -z/--time-cond and you see this warning:
Warning: Illegal date format for -z, --timecond (and not a file name).
Warning: Disabling time condition. See curl_getdate(3) for valid date syntax.
It works just fine, but the warning is ugly.
Change-Id: Ic6f13a2c596b988308d7fca9cd1745e5d48ae5fb
At least on RedHat the run-parts command is very precarious and doesn't
even check for the return code of the scripts it runs causing the
dib-first-boot to delete itself even when something went wrong with the
configuration of the first boot of the image. Using the dib-run-parts
instead will make the whole first boot routine to be more robust and
less platform dependent.
Change-Id: I0073fd52fc1fc8848ca9277a84603124215cdb6e
Adds a new err_msg function which is used to:
-echo feedback to the deploy ramdisk console
-keep track of the first error message we hit so
that we can send it along to the baremetal-deploy-helper.
Also, updates our wget request back to baremetal-deploy-helper
to include the first the first error message (if any) as
the 'e' parameter.
The err_msg uses a new simple safe_url_encode function to ensure
we don't send invalid characters in our HTTP post requests.
Change-Id: I5a623a6f66cde8d81ff1e75800dc2953ca2703a8
Adds a new 'troubleshooting' function which encapsulates
the things we might want to do when something bad happens.
Typically this is echo'ing a simple message and launching a
bash shell.
The new troubleshooting function also makes use of a new
'troubleshoot' kernel param which if specific will allow you to
hang the deployment process and interactively debug the deploy_ramdisk
via a bash shell on a console.
Troubleshoot is disabled by default.
Fixes LP Bug #1191043.
Change-Id: I2cba8a9674075ba7e420027d40ef8cbe756cf07e
Fixes bug 1184943
Adding an element that allows other elements to register
repositories it would like to be retrieved for it.
Doing this outside of the chroot allows locally cached
repositories to be used. It also gives the ability to d-i-b
to specify what revision to use if an alternative to the
most recent is required.
Effectively allowing a CI system to test d-i-b and elements
without being effected by unavailable git repositories or
breakages in actively developed source code being used by
the elements.
Change-Id: I1527facebaad256a357af680e017b34b1788575d
Updates our deploy element's init script so that it calls
find_disk in a loop until it returns true (meaning we have a disk).
Previously on some bare metal machines find_disk would return ""
which causes the subsequent iscsi target commands to fail due to
a bad backing store.
This commit also updates the error message when start_iscsi_target
fails to be a bit more accurate as well.
Fixes LP Bug #1190984.
Change-Id: I3cd535d6672c197c1c3c539c83bba36be7a14e18
Having all security enabled is not always interesting, e.g. when
developing or testing new elements.
Change-Id: I828ecedc805ce4f89d60d185994eaa9c651d436a
When the target directory is empty, the for loop printing our profile
data was failing because of a glob problem.
Change-Id: I34e612021c70d6b8f75423de0d8be969c52e58e2
This patch will append /usr/local/bin to the sudoers secure_path variable,
by doing so commands prefixed with sudo will then find some binaries
delivered by other elements in that path (e.g nova-rootwrap).
Change-Id: I1ebad8b1932620559a3d90aa39298f9b12e636fd
Bug 1124593 reported that ssh host keys were not being created, and the
lack of seed metadata files was the cause. Add those files and remove
the workaround.
Change-Id: I6fb55be7f8c7efd1f75aeba9123f495e312ff695
The images produced by the diskimage-builder have their filesystem with
a label of "cloudimg-rootfs", so we need to change the default /etc/fstab
on fedora to reflect that.
Change-Id: Id1bb00cb81cb200a114f500e26272624be577da0
This element will install the network modules for dracut and regenerate
the initramfs. The network support would allow us to configure the network
of the image via kernel cmdline instead of injecting files into the image.
Change-Id: I829405127e77aec80b99ac8dd2032cb0c6d81063
After the refactor of the first-boot routine there's no use for this
script anymore, in fact all it's doing is to create a broken link.
Change-Id: Ic09e7208bc950380341e8a073647950ac99a05fd
Fedora's partprobe does not create devices the same way it does on
Ubuntu. Instead of using partprobe, this patch uses kpartx, which
works on both Fedora and Ubuntu.
Change-Id: Iac5cbac083e423425693c8210cd5d058ce4bce72
Updates the new 99-dkms element so that it installs the package
before using it.
Fixes LP Bug #1183785.
Change-Id: Ia191ed3cae707a8c8591f849dc0c6293e849d64a
