It turns out make has always been a tacit dependency of openssl as it
ships a Makefile for certificates [1]. This just recently changed to
be a hard dependency in F27, so this now fails as openssl is a
dependency of protected packages such as dnf. Since it's always been
wrong to remove it, we take it out of the purge list.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=783446
Change-Id: I69efb3a56878ab97c4587bbbf5356bea752f2846
zypper only supports the --no-recommends option during installs, giving
the option during removals results in an error.
When setting ACTION=remove, remove --no-recommends from EXTRA_ARGS, and
set --clean-deps to also remove no-longer-needed dependencies.
Rename EXTRA_ARGS to ACTION_ARGS for increased readability.
Change-Id: Ifbd168992b1a20658b6b4a99ba175234f6c78f6d
When "epel" element is used during a build process
with "rhel7" distribution, the build failed
because the "epel-release-7*" package cannot be
installed.
The reason is because the URL is not correct, it
should be:
URL=$BASE_URL/$RELEASE/x86_64/Packages/e/
Change-Id: I90c26892361f7611645b85f2eddc949b2f0d76fc
Closes-Bug: #1735547
At the moment all musl needs in addition to an official stage4 file is a
few keywords and use flag changes.
Change-Id: Ibf4a6d616aca1aef876967e2aa34170c96ac9ef8
This is intended to eventually support building musl-libc based images,
which need the musl overlay.
Change-Id: I8f5429ffa64e74c860772d9a00ff0b7eebb7721a
As described, Fedora 27 has a curl-minimal package that comes in to
satisfy the rpm package dependency. It conflicts with the "real" curl
package -- which is so commonly installed (by infra elements, etc)
that this becomes an annoying problem. Just pre-install the full curl
package.
Fedora 24 is old enough to not worry about, so remove some old
workarounds to make the flow a little simpler.
Change-Id: I67baf96377109ac4521ba00243a0d91b35fafba0
The current implementation - as introduced in
Iee44703297a15b14c715f4bfb7bae67f613aceee - has some shortcomings / bugs,
like:
* the 'grep' check is too sloppy
* when /dev/pts is already mounted multiple times the current implementation
fails:
$ mount | grep devpts | sed 's/.*(\(.*\))/\1/'
rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000
rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000
rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000
* code duplication
* Using the undocumented and non-robust output
of 'mount'.
This patch fixed the above problems.
Change-Id: Ib0c7358772480c56d405659a6a32afd60c311686
Signed-off-by: Andreas Florath <andreas@florath.net>
We oneshot emerge without calculating dependencies a few things to solve
for possible dependency loops.
Python 3.5 also became stable, so don't need to do special things for
it.
Matched the uninstall with the install lines (no need for a full if
statement).
Change-Id: I7c5e546612ac47d659e73a46a52e34d39ca81949
We should always refresh the Tumbleweed repositories and the 'update'
one for Leap in order to always have the latest information from the
repositories.
Change-Id: I85db9d8bb7fa153f01222129e9b36fecc2632f57
This is a continuation for f2cc647dae ("diskimage_builder: lib:
common-functions: Fix options for devpts mount"). We also need to
respect the devpts mount options when the dib elements are mounting
this virtual filesystems themselves.
Change-Id: Iee44703297a15b14c715f4bfb7bae67f613aceee
We want to install python3-pip, not python-pip when we are building a
py3k image less we pull in python2. Once we stop installing python2 we
have to stop calling python2 during pip install.
Change-Id: I7d8ba9300039cce90965410a4e16ca9e711904c3
s390x architecture uses zipl as bootloader. When used in combination
with the vm element it replaces the existing bootloader element.
It's mandatory for s390x vm images.
Use cases
---------
* Allow users to create s390x images that run on nova with s390x
libvirt/kvm backend
* Building nodepool images for s390x third party CI
Supported Distros
-----------------
The following listing shows all Distros that officially support
s390x and how those Distros are supported in DIB with this patch.
* SLES - not supported (SLES is not supported in DIB)
* RHEL - not suppoprted (RHEL is not supported as KVM guest on s390x,
therefore there's no rhel7 qcow image for s390x available
like it is for other archictectures)
* Ubuntu - supported
Ubuntu images can for example be built using the following commands:
$ disk-image-create ubuntu-minimal zipl vm
$ disk-image-create ubuntu-minimal zipl
$ disk-image-create ubuntu zipl vm
Testing
-------
Cross architecture building of s390x images is not supported so far.
The plan is to set up a ThirdParty CI that builds the image for s390x and
provides the logs.
Co-Authored-By: Andreas Scheuring <andreas.scheuring@de.ibm.com>
Co-Authored-By: Holger Smolinsky <holger@smolinski.name>
Co-Authored-By: Zhiguo Deng <bjzgdeng@linux.vnet.ibm.com>
Co-Authored-By: Arne Recknagel <arne.recknagel@hotmail.com>
Closes-Bug: #1730641
Change-Id: I576e7edda68da12e97c60af38f457915efe7b934
In a couple of places we use flock for critical sections, but we leave
lockfiles around in various locations which can be confusing.
Introduce DIB_LOCKFILES global (under ~/.cache/dib/lockfiles) and
write lockfiles in there.
Fix up removal of the lockfile in the yum path; we just want to make
sure we cleanup the .rpmmacros file, but we don't need to remove the
lockfile as well.
Co-Authored-By: Andreas Florath <andreas@florath.net>
Change-Id: Ie810b2836be521325afe923708d046112e1e1e20
Currently a bind is used when mounting /dev/pts in chroot.
This leads to problems - especially when running DIB in parallel:
It was observed that the /dev/pts mount vanishes from the host
system.
This patch uses '-t devpts' - as it is done for /sys and /proc -
for handling /dev/pts.
Change-Id: Id7775ae6fca6502af800e7b73a00862ef320206b
Signed-off-by: Andreas Florath <andreas@florath.net>
On ubuntu we detect that in python3 we need to install
python3-virtualenv, but append this to the packages to install rather
than replace python-virtualenv which results in both being installed
(and therefore grabbing python2).
Change-Id: I422490ebe9a9c655552685bc2ff342d288335a9c
Closes-Bug: #1724656
There have been a few changes over the past few months, here we make the
following changes.
* change from backtrack=99 to complete-graph as a more correct flag
* make python version selection more in line with what gentoo supports
* set up python before stuff gets pip installed
* ensure we have the proper pip so we can install pip packages as root
* ensure we have the proper use flags for the disk formatting changes
* set DIB_RELEASE like other distros
* fix openssh-server element for gentoo
Change-Id: I17202de3016616ce34c8cbead7d0fb047a64e96b
This commits make update to ssacli version to point to latest
ssacli release that has support for HPE P/E-Class SR Gen10 controllers.
Change-Id: Ia9a0eaec78d601f56b4036e57601554b87f21acc
Closes-Bug: 1721185
A small update was made to 4.4.0-96.119 that dropped the
initramfs-tools dependency from the kernel [1]. This had the
unfortunate affect of removing the initramfs from ubuntu-minimal and
making it unbootable, since we specify the root device via LABEL=.
Add the package explicitly alongside the kernel.
Also, small fix to pass unit tests
[1] https://bugs.launchpad.net/ubuntu/+source/linux-azure/+bug/1700972
Change-Id: I57a0f08cd5e082ecdf8dba0ab34fb3062c50836d
This commit adds change in 'proliant-tools' element to
install a package 'unzip' which is required to perform
SUM based firmware update for HPE Proliant servers.
Change-Id: Ib8f6d18402439edd93d100cc7a4fb2094c863715
As described in the comment, we need to create the /etc/machine-id for
the image-based build when systemd isn't updated (as is usually the
case for a new distro)
Work on clearing this out continues, but this brings it to parity with
fedora-minimal.
Change-Id: Icbbbabb4114d4d95909648d8e39a6bae6d2a7b7b
Depends-On: I761e425f8a658669d9b8a70ce4260cec263ea51a
The URL we are using seems to have disappeared. Update this to
download.fedoraproject.org. The new URL requires a "subrelease" now,
add it, along with a note on where it comes from.
Change-Id: I761e425f8a658669d9b8a70ce4260cec263ea51a
This element was assuming that yaml was included as package,
but there are systems not including it. So properly add yaml
as a dependency.
Change-Id: I72da2776674a3963657052b9a9715abcb4fab1e2
Partially-Fixes-Bug: #1715686
