If rdisc6 is available, a node using this element will loops until
DIB_DHCP_TIMEOUT is reached because of a missing 'break' when rdisc6
return code is 0.
This will mark the dhcp-interface@.service unit as failed (because it
has the same timeout) and not bring any network interface online.
Change-Id: I034dcda94d765f236950ebcbee36789f5bdc515f
Closes-Bug: #1854717
Signed-off-by: Hervé Rousseau <hroussea@cern.ch>
Support for easy_install codepaths is increasingly broken, and now
putting allow-hosts in this file breaks most recent pip. Just stop
installing the file - people should be using pip anyway.
Change-Id: I0a6b2432f81d80fbcbb336403fe555003880fa9f
When running under nodepool in a foreground, non-daemonized situation
without a tty (i.e. within a container) we're seeing this "wait" hang
indefinitely.
It is probably related to "outfilter.py" and output file descriptors,
although TBH we haven't completely root-caused it. I won't claim this
is a great solution, but it should hopefully let the dib process
finish and just die, where outfilter will disappear.
Change-Id: If78da54df3d4c240fee16aee4413ec554b37c1d6
The current implementation evauates the dib-init-system
script too early. Also it looks that there is no simple
way of getting the info about the init system automatically:
another element can install (later on) a different
init system. Therefore the only reliable way of setting
this is manual.
Change-Id: I6e9ffa1bdb3154f488f4fd335b197699b86aacd4
Signed-off-by: Andreas Florath <andreas@florath.net>
I commonly get asked for help when people are attempting to create
local image elements and they cannot get them to work.
diskimage-builder silently ignores element scripts that it doesn't
find to it's liking, such as non-executable or files with extensions
(.sh is a common mistake).
This patch extends the '-x' tracing flag down to dib-run-parts and
will cause it to print out helpful messages when these files would
otherwise be silently ignored.
Examples:
Ignoring non-executable files: 10-do-not-run-me
Ignoring non-conforming filenames: 10-I-can-run.sh
I am not enabling these by default as they can create extra noise
and require additional filesystem IO to produce.
Change-Id: Ic804efca3015c199440b4b10da951d71a815c64f
When the rdisc6 utility is available probe for router
advertisement. configure eni and rhel-netscripts interfaces
to do IPv6 address configuration according to the flags
in the RA recived from the router.
The systemd service file timeout is DIB_DHCP_TIMEOUT * 2,
so that DHCPv4 can timout, and dhcpv6 run before the service
times out.
Retries are commented in dhclient.conf, without it we end up
trying DIB_DHCP_TIMEOUT * 60 before the client move on to
IPv6.
WHEN:
Stateful address conf. : No
Stateful other conf. : No
THEN:
Do not run dhclient at all, autoconfiguration via
SLAAC only.
WHEN:
Stateful address conf. : No
Stateful other conf. : Yes
THEN:
Run "dhclient -6 -S", The ``-S`` option makes the
dhcp client not request an address, only other
options such as DNS servers and NTP servers from
DHCPv6 server.
WHEN:
Stateful address conf. : Yes
Stateful other conf. : Yes
THEN:
The dhcp client should request an address _and_ other
options such as DNS servers and NTP servers from
DHCPv6 server.
NOTE: No IPv6 support added for suse-netscripts
Closes-Bug: 1754219
Change-Id: Icdc79875c33f894ab7eaec8afdfb33a731efff99
Currently DIB_ADD_APT_KEYS only supports GPG armor keys, while
default Debuntu apt gpg keys are in keyring format.
Change-Id: I361c375e25b03a08b19052b10c6733939c8df921
This reverts commit a3e9e7f89e.
We still have some issues with vhd creation on RAX
In short, it appears that images fail to resize unless they have a
specific "creator" field. Revert this while we consider the options.
[1] https://bugs.launchpad.net/nova/+bug/862653
Change-Id: I2b6a3bfbfe28432fbb6a2ce4a0211939d224b8d5
The "ironic-agent" is copied to ironic-python-agent-builder and
hence it is deprecated from DIB.
Remove from functional testing
Change-Id: Ibc4f75b9d7e2a31994fc86d05bd57975f00fb74f
Task: 36198
Story: 2005114
This package is not installed by default on Debuntu, but is on RH
platforms. This is causing a build breakage as DIB_PYTHON_VIRTUALENV
tries to use this (I3414fb9e503f94ff744b560eff9ec0f4afdbb50e).
Add the package.
Change-Id: I9a551c57dd128bbb4b095c847f634c777b2cb553
To ensure dracut does not load nouveau we need to explicitly disable it via
omit_drivers.
This change adds a method to drop in arbitary dracut conf files to an element
which are picked up by dracut-regenerate and included in the chroot where we
run dracut.
The disable-nouveau element just adds a conf file with
`omit_drivers += " nouveau"`
The default dracut conf files in /usr/lib include a similar file to omit the
nvidia kernel modules.
Change-Id: I6375e4843fd08d1410141fbbd8658042dcd5ad05
Closes-bug: 1842664
Seeing this at the end of the tripleo overcloud full build:
99-selinux-fixfiles-restore: line 69: [: too many arguments
Change-Id: I8fb10f3d3d38723b41190ae1898757e6df073945
The vhdutil utility is completely dead; the whole subsystem it relies
on was removed with [1] so it's not even vaguely possible to keep it
up-to-date.
I took the .raw images on a nb and used the qemu-img there (so Xenial)
and generated some VPC images; uploaded them to rackspace and the all
seemed to boot fine. If there was a problem, maybe it's been fixed on
either the qemu or RAX side in the previous few years.
Thus swith to qemu-img to generate the vhd images too.
[1] https://xenbits.xen.org/gitweb/?p=xen.git;a=commit;h=5c883cf036cf5ab8b1b79390549e2475f7a568dd
Change-Id: I3099d2ebb958370fcec623087a093b2c8dbdc6c4
Add option to set the suite subpath after the release name for the
security mirror URL independently in the debian-minimal element,
since this can differ between mirrors.
Change-Id: I4cc8f54fba012986423e30e19bff276208b8ad62
With the introduction of centos 8 we have constructs like
if [[ $DISTRO =~ (centos|fedora) && $DIB_RELEASE -ge 8 ]]
This is intended to match the "centos7" element (from the =~) but it
was missed that this is setting the DIB_RELEASE to "GenericCloud".
I think it makes more sense for this to be a numeric release, and
makes constructs like above work. There really isn't any other type
of image to choose here; thus we move it into a new, centos7
specific variable.
Note that when the centos 8 images are available, we want to move to a
generic "centos" element that will handle both 7 and 8 together (same
as rhel) based on DIB_RELEASE and deprecate centos7; this works with
that environment too.
Change-Id: I2e6b7848070d6452c0563e2a122447627c6e6bf7
It turns out that this breaks ipv6 config with NM. Instead what we want
is for glean to not up interfaces on boot (see the depends-on).
Change-Id: I6c5bc76c433e29f02d3266ab8f669015125ec954
Depends-On: https://review.opendev.org/#/c/688031
This adds CentOS 8 into functional and boot tests.
This completes centos-minimal support, documentation is updated and a
release note is added.
Change-Id: I435c2967b4f49faeb6d6edf189907b9f96e80357
As described inline, NetworkManager and dhcp-client make up the basic
networking for centos 8 installs; bring them into the base image.
Although in infra we then use simple-init, some other users find this
helpful.
Change-Id: Ib9f32e73bf9109cc1b659fe1deceb1a15301ffeb
By default network-scripts package isn't installed, so the directories
for these files don't exist either. Skip by default for Centos 8.
Change-Id: I194ec3735e17f27e586386541dc51f775b01e510
Use the wrapper calls from Ia267a60eecfa8f4071dd477d86daebe07e9a7e38
to install glean.
Using this wrapper means we cover all cases without more and more
branches; it should work for python2, python3 and also the special
case of RHEL/CentOS where dib-python points to the special
/usr/libexec/platform-python (which is python3.6 with inbuilt pip)
Change-Id: If624e8bb66ce0761fc0d5f34c2bed8b93a7daeee
NetworkManager with simple-init has proven to be stable in OpenStack
infra, switch to it by default for CentOS and Fedora. For CentOS 8
and Fedora, add a check to make it the only option. Thus only CenOS 7
remains optionally using the legacy scripts; this is likely not used
anywhere (infra is really the primary user, where NetworkManager is
already used); we can likely remove this variable (and hence path) in
a future cleanup.
In the setup, remove rhel7 element which was never really tested.
Reorganise the fallthrough to call out the default paths as doing
nothing.
Change-Id: Ic996956da4b85f7d95179b8df9881d5f52c091af
Currently, the serial console is hardcoded to ttyS0 in the bootloader
element. This is a challenge for users that want to build images for
some baremetal servers. Supermicro servers, for example, use ttyS1 for
the serial over lan interface.
This patch adds a new environment variable DIB_BOOTLOADER_SERIAL_CONSOLE
that can be set to override the default.
Change-Id: Ie8173be8690ac0b7164ce9e5b66d3c1c18f844d6
Add option to set the security mirror URL independently in the
debian-minimal element, since this can not be overriden by the
standard DIB_DISTRIBUTION_MIRROR variable.
Change-Id: I145844a410d06a479e68db1bf6d5d0159389305c
As described inline, deprecate the "source" install for CentOS 8.
Overwriting the packaged tools has long been a pain-point in our
images, and the best outcome is just not to play the game [1].
However, the landscape remains complicated. For example, RHEL/CentOS
8 introduces the separate "platform-python" binary, which seems like
the right tool to install platform tools like "glean" (simple-init)
with. However, platform-python doesn't have virtualenv (only the
inbuilt venv).
So that every element doesn't have to hard-code in workarounds for
these various layouts, create two new variables DIB_PYTHON_PIP and
DIB_PYTHON_VIRTUALENV to just "do the right thing". If you need is
"install a pip package" or "create a virtualenv" this should work on
all the platforms we support. If you know more specifically what you
want (e.g. must be a python3 virtualenv) then nothing stops elements
calling that directly (e.g. python3 -m virtualenv create); these are
just helper wrappers for base elements that need to be broadly
compatible.
[1] http://lists.openstack.org/pipermail/openstack-infra/2019-September/006483.html
Change-Id: Ia267a60eecfa8f4071dd477d86daebe07e9a7e38
Don't install the "yum" package, which is a backwards compat around
dnf. With 687003f we should not need the backwards compat links any
more.
Add libcurl to avoid conficts with in the curl "-minimal" packages
that happens on CentOS 8. But skip it on Fedora, because it seems to
create more problems there (not going to pretend it isn't all a
hack ... but it seems to work).
Change-Id: I1de2703eb5075a0a22837b6898bd8eb960d080dd
A few places we either assume centos uses "yum" directly, or have
switching based on the distro type.
In both cases, we can use ${YUM} directly to avoid ambiguity
Change-Id: I71095a9bd1862f8956b5982fbbb3e1d213926c14
The libselinux packages etc don't exist for Python 2 on Centos 8 [1].
Ensure the package map installs the python3 versions.
We could probably invert the logic now, and make it so Centos 7 is the
"special" version that overrides things to install python2. Left
alone for now to avoid changing too much at once.
[1] https://bugs.centos.org/view.php?id=16458
Change-Id: I944cf4f2902c28728aa5bb9e2a00b3eef122d52e
CentOS 8 has the "new" split-up locales packages. Fedora 24 is now
long gone, so take out the old branch and apply the lang package
install to Centos 8 as well.
The manual locale cleanup is not necessary on Centos 8; skip it.
Change-Id: Ib65fc15fe471348793fd6efb034517f11abd905e
