The listing of *-$INSTALL_TYPE-install files currently uses ls, which
errors out when the glob matches no files, thus using true to not fail
it.
Instead, use find to collect the file list, so there is no need to
ignore the command errors.
Change-Id: Ic6888106858df320a1c90a84f1b9ec74d436b9e6
Not all operating-system elements install cloud-init, but the base
element assumes its existence. Create the directory if it does not
exist.
Change-Id: I4bda8dc5d200825ea0c8163a4e5c44050a45083f
it may happen that if the system where disk-image-create runs is busy,
then the kpartx -l run may leave a stale autodelete loop device.
This is because kpartx -l first adds a new loop device, then does the
listing and removes the loop device. The latter may not end before the
end of the kpartx run, leaving a loop device marked as autodelete.
Such kind of loop device will automatically delete itself, so the
rm -r $WORKING
after
sudo umount -f $WORKING/mnt
in the EXIT trap will fail because $WORKING does not exist anymore.
To prevent this situation, just ask udev to finish its operations,
properly removing the (temporary) loop device.
Change-Id: I12246f3dbe6b5669e698767682a5a142f803823b
RHEL 7 does not ship tgtadm or tgtd so they cannot be used in the
deploy ramdisk. This change separates the tgt-specific parts of
the ramdisk into their own element, and adds a new one that supports
targetcli instead.
For now, the tgt implementation can only be used with traditional
busybox ramdisks and the targetcli one can only be used with dracut.
This is because dracut is primarily used for RHEL right now so it
makes sense to keep the dependencies simple. If there is a future
desire to mix and match the implementations that could be done, but
it would require users to explicitly select between tgt and
targetcli.
Change-Id: I4f99c91016287e08d836095c2f2261de8b45abdc
Co-Authored-By: James Slagle <jslagle@redhat.com>
It is reasonable that elements may need to include additional
kernel modules in a dracut ramdisk. This is done with the
--add-drivers option to dracut, but previously the value passed
was hard-coded.
This change allows an element to put a file containing its desired
drivers in a dracut-drivers.d directory, and the list there will
be added to the list of drivers added. This functions in
essentially the same way as the binary-deps.d directory that
already exists for including additional executables in a ramdisk.
Change-Id: Ie892b908d36c175a469f7cde7dd803ad4b1942b6
This is required on Fedora 21 in order to build some
packages via source. Includes files like:
/usr/lib/rpm/redhat/redhat-hardened-cc1
Specifically this fixed MySQL driver compilation issues on Fedora 21
for source builds.
Change-Id: I459f2203fa145049dda185da952813118193d573
Official MariaDB repositories offer the package : MariaDB-Galera-server.
This package has been now ported within Fedora (and also RDO), the
package is now called mariadb-galera-server. Yum install being case
sensitive hence this change.
Change-Id: Icd03877f17d01708b3916578991e42eef30a69e4
As part of the blueprint root-device-hints Ironic will pass some to the
deploy ramdisk some hints about which disk device it should pick to be
root device (the one where the image will be deployed on).
Before the deploy ramdisk would pick the first device it finds, but as the
machine could have more than one SATA, SCSI or IDE disk controllers the
order in which their corresponding device nodes are added is arbitrary
causing devices like /dev/sda and /dev/sdb switching around on each
boot time.
Plus, as people are adding support to build RAID arrays in Ironic we need
a way to tell it to use the just created device to be the root device.
The list of hints that could be passed to the deploy ramdisk so it finds
the right disk is:
* wwn (STRING): unique storage identifier
* serial (STRING): disk serial number
* model (STRING): device identifier
* vendor (STRING): device vendor
* size (INT): The size of the disk in GB
If not hints are passed, the deploy ramdisk will continue to do what it
did before to find the disk.
Change-Id: I8425f593e1a610af5a3697988702603ff218f2de
This commit adds support for uefi localboot in
deploy-ironic element. The change is to mount the efi
system partition (created by Ironic) in /boot/efi.
The corresponding Ironic change is
I00ac31da325676ea4ea1ac4185f5ac3a52c5809a
Implements: blueprint local-boot-support-with-partition-images
Change-Id: Idf7ac5987e14e1d31311834196ca7283deec15c6
Commit 36b59c001c introduces
DIB_DEBUG_TRACE, to be checked in element scripts for enabling tracing.
In the aforementioned conversion, few scripts were left with
unconditional "set -x" calls: remove them, changing the default value
for unset DIB_DEBUG_TRACE from 0 to 1, to retain their older behaviour
(as it was done in 36b59c001c too).
Change-Id: I3d1a9290021bf63de7d4e7752e809852e784ac8b
Previously, this code was not checking for the proper environment
variable for an element's installtype. There was a line replacing '-'
with '_' as is required, but that value was not actually used when
searching for the environment variable.
Change-Id: I0bbd56969188389db81844d9276269464870f776
/tmp does not contain anything useful anyway, and excluding its content
makes the initramfs smaller too.
Change-Id: Ia72867e0cdebacf668ac1a1f551a965da0d69694
This adds support to UEFI secure boot by copying signed shim and
grub bootloaders into ramdisk image.
Closes-Bug: 1419707
Change-Id: I1193cd3a9011855a6804966a31c7c0e28da90ada
The newest stable Fedora splits out kernel modules into
a separate package. By default this is not installed in
the Fedora cloud image... and it contains some things we
need for Ironic (iscsi_tcp module) among other things that
might be very useful.
Change-Id: I3374ea278fecfeb6552e4664717ef3646d382c17
Closes-bug: #1429504
The other distro elements set DIB_RELEASE which allows the other
elements to know what distro release is being built during the
extra-data or environment.d phases.
Change-Id: I00bf13410ded5b678ebc66ff191891ed3cc80f4f
This is the centos element, which builds CentOS 6.
There are a couple of modifications to redhat-common because
the version of tar in el6 doesn't support --xattrs-include.
There is a change to both pkg-map and svc-map to add 'centos'
to the 'redhat' family.
Also explicitly have to install cloud-utils growroot and
dracut growpart for proper fsresize at instance launch.
Also sets the DIB_EXTLINUX variable because there is no grub2
for this distro.
Change-Id: Iffd57bce1484c43c2cffcbdb37b602185216e63a
The construction of the combined svc-map-services file uses the host's
/tmp directory to store a work-in-progress file. That file's left behind
after it's done with.
There's a potential race here; together with problems that may arise
if two users attempt to run devtest on the same system.
This patch fixes this by creating the temporary file specifically under
$TMP_MOUNT_PATH.
Change-Id: Iecbdc583e37bed542249c316919c3712c28c7440
This allows them to install packages already specified in .yaml files
for them, which are not installed otherwise since the migration to .yaml
files.
Change-Id: Iac8c7eb55116938616e5299b84487cd52e0cbf6f
