Now that we have a generic yum-minimal element, just use it in centos
instead of rinse. Adding base as an element-provides of yum-minimal
because this element conflicts with the base element.
Co-Authored-By: Gregory Haynes <greg@greghaynes.net>
Change-Id: I15275d821781171c118f21aa0c0bca55f65a65b3
We don't export DIB_RELEASE in the base distro scripts, so many
times it will be an unset variable in 51-bootloader from the vm
element. Currently that script doesn't handle the situation
properly and we get errors like:
line 160: [: =: unary operator expected
This change quotes the references to DIB_RELEASE so that won't
happen anymore.
Change-Id: Ic8f91804334f8862c217f465be80e96d3116f5c8
There is a wide variety of tracing options through the various shell
scripts. Some use "set -eux", others explicity set xtrace and others
do nothing. There is a "-x" option to bin/disk-image-create but it
doesn't flow down to the many scripts it calls.
This adds a global integer variable set by disk-image-create
DIB_DEBUG_TRACE. All scripts have a stanza added to detect this and
turn on tracing. Any other tracing methods are rolled into this. So
the standard header is
---
if [ "${DIB_DEBUG_TRACE:-0}" -gt 0 ]; then
set -x
fi
set -eu
set -o pipefail
---
Multiple -x options can be specified to dib-create-image, which
increases the value of DIB_DEBUG_TRACE. If script authors feel their
script should only trace at higher levels, they should modify the
"-gt" value. If they feel it should trace by default, they can modify
the default value also.
Changes to pachset 16 : scripts which currently trace themselves by
default have retained this behaviour with DIB_DEBUG_TRACE defaulting
to "1". This was done by running [1] on patch set 15. See the thread
beginning at [2]
dib-lint is also updated to look for the variable being matched.
[1] https://gist.github.com/ianw/71bbda9e6acc74ccd0fd
[2] http://lists.openstack.org/pipermail/openstack-dev/2014-November/051575.html
Change-Id: I6c5a962260741dcf6f89da9a33b96372a719b7b0
Patch adds support to create PowerPC image with vm element.
It creates 2 partitions, one for PReP boot and other for root and
installs grub-ieee1275.
Change-Id: I4675ef2b82aa69b63e63a1cc7db01b0c0e6f9fff
Closes-Bug: 1418739
Using lsb_release to figure out what distro and release an image is
is redundant, as the same information is available in DIB_ vars.
Further, it causes errors when creating new rhel7/centos7 images
like this: http://paste.openstack.org/show/144729/
Change-Id: I213ee581b8abfe119ffe3b783e6a3236e58e3e47
Per [1], our current root label of cloudimg-root does not work with
XFS because XFS only allows 12 character labels. This change
addresses that by allowing a custom rootfs label to be specified
in the call to disk-image-create. There should be no backwards
compatibility concerns as the default label is unchanged. Any
external elements dealing with the label would need to be updated
to support this new feature, but should continue to work as before
as long as a custom label is not specified.
[1]: https://bugzilla.redhat.com/show_bug.cgi?id=1139584
Change-Id: I596104d1a63b5dc6549e8460a1ae3da00165ef04
While building images in a dual boot host,
/dev/sda is leaking into build's grub config.
It is visible in the logs that the commands
GRUB-INSTALL and GRUB-MKCONFIG probes Host OS environment.
This is avoided by setting grub_disable_os_prober
to true in /default/grub config file.
Change-Id: I7408de7b3bc8a62f8bf103f00a88a596f988353c
Closes-Bug: 1166491
The previous method only configured serial console for Ubuntu or
Fedora, I noticed this wasn't working when I built RedHat 7.
After reading about how grub-mkconfig works, I realized that we
shouldn't be using sed to modify grub.cfg, and set up the proper
variables in /etc/default/grub
Change-Id: I02b73dc5074cb48a716849cb8a8a9b2f054bea31
Some extlinux packages install mbr.bin under /usr/lib/extlinux or
/usr/lib/EXTLINUX so tese directories need to be checked as well.
Also, there are packages that create a /boot/extlinux directory
which needs to be taken into account. Finally, commit
bccffc8bfd dropped the /boot prefix
from the kernel and initrd references in the ext/syslinux config
file which is simply a bug that needs fixing.
Change-Id: Idb071c9b18ff557b0f0f76d0d754536f2deca904
Closes-Bug: 1335042
Initial support for a centos7 image.
This is separate to rhel7 because the major differences are things
like repo and image locations, which are always going to be different.
We should merge any real changes into the redhat-common layers.
Apart from the added support files in centos7/*, the other change is
mostly modifications to redhat-common's extract-image to handle
different partition layouts of the centos7 image.
Change-Id: I943abe5ff0a803f36eda266a79af0d9220edcae7
Debian based distros do not enable the serial console by default
in grub.cfg, instead sending all boot messages to the display
Change-Id: I0e80859198e77862ab0301ab27ebe11702fba09d
The script to find best kernel from image (used by vm
and baremetal element) is duplicated and is not in sync
with each other. Moving the code to img-functions as a
function will reduce duplicated code and make it reusable
in future.
Since img-functions is not accessible in chroot env,
kernel selection is being moved from finalise.d to
cleanup.d in the vm element.
Change-Id: I8fbccc13a2c61a5191ef9ea5d2a8302a3e43b000
As with the previous similar changes, this is intended to catch
problems as they happen instead of ignoring them and continuing on
to potentially fail later. Setting this on all existing scripts
will allow us to enforce use via Jenkins.
Change-Id: Iad2d490c86dceab148ea9ab08f457c49a5d5352e
--target has been introduced in grub2. This patch ensure we use
the minimal version before adding the --target XXX flag.
Debian Wheezy and Precise share the same limitation regarding the
root device.
Change-Id: I5b3ad42b9fb536d13fb65d84339bc15bc23d99a3
The grub install scripts on Fedora have hardcoded checks for
/sys/firmware/efi and if the directory exists, it uses efi
specific instruction like initrdefi, linuxefi etc. vm element
should fix it once the configuration is generated.
Closes-bug: #1231946
Change-Id: I888304cb9167b8e074b04ca6c5b2f9143b70d37d
Those parameters allow to access the console for VMs using
extlinux (CentOS 6 for example). They are already added to
Fedora images.
Change-Id: I035170bd101062e004fb3782b5f8e5a7944a4f03
Closes-Bug: 1296899
Extlinux bootloader configuration in "vm" element requires vmlinuz and
initrd.img files in /boot/ with "generic" suffix. When these don't exist,
bootloader configuration should fall back to using whatever does exist.
Change-Id: I79d426e8f008e9f23db899f0b8f8cf2f23643e28
Reference to ${GRUB_OPTS:""} in 'vm' element causes syntax error
if GRUB_OPTS is set. Fix by changing to ${GRUB_OPTS:-""}.
Change-Id: Iae3ee8b7c4064c92d0cfc1b5a8caa22e53d6d112
If creating an image of a disto without grub2 extlinux is instead used,
extlinux was being configured to mount the root filesystem as
read/write which in turn causes e2fsck to fail to test the filesystem,
on RHEL 6.5 this causes the boot process to fail.
Change-Id: I07859e0df9a2bc1ddd8c5f2ed4509ba14312e140
Delete stale symlinks created by current openSUSE 13.1
for kpartx loopback partitions. Those break bootloader
installation otherwise.
Change-Id: I13a7387e341b4426b459610fd1d3c49ce5730f46
52-force-text-mode-console, running after 51-bootloader, calls
grub2-mkconfig (on Ubuntu that will happen via the update-grub call).
This call will overwrite all the changes that 51-bootloader did to the
grub.cfg. By merging the 52-force-text-mode-console code into
51-bootloader we avoid that. This also means that 51-bootloader will now
call grub2-mkconfig regardless of whether there is already and existing
grub2 configuration or not (52-force-text-mode-console did that in the
past anyway).
Additionally this commit enables the force to textmode code for openSUSE
(was previously only working correctly for Ubuntu and Fedora).
Closes-Bug: #1260323
Change-Id: Ida8e1a69df22d41ad70eb7154707c50613b536a8
This is currently experimental/incomplete. See
elements/opensuse/README.md for details.
Change-Id: Ie5bcab15c9703cf15ceb642fb986a8afc34f96fb
Co-Authored-By: Ralf Haferkamp <rhafer@suse.de>
Since we are using bash syntax in some of the element fragments,
we should make sure we use bash for all of them, so that things don't
break on systems where /bin/sh != /bin/bash.
Change-Id: If2f043c57aa4e1492b7f9839213ef6123f683612
Changing the grub config makes no sense in a build not heading for a vm
and may fail because grub is removed from images not including the vm
element. Forcing textmode for those images would be better done in nova.
Change-Id: I1c5b89e551e62df2463200b1889cb2342498c7dd
When uninstalling grub2, leave all its dependencies
including grub2-tools installed to minimise the number of packages
which need to be installed in the finalise stage.
Since the yum cache is unmounted during finalise, installing
grub2 in finalise is slowed by re-populating the yum cache.
This change copies the grub2 rpm out of the yum cache so it can be installed
from file during finalise.
This should prevent disk becoming full during finalise on Fedora.
Closes-Bug: #1217185
Change-Id: If095adc4abb52a19a3aa0b1caebfb3e4d8f605ef
If GRUB2 is not available in the system a fallback to install Extlinux
will happen. This patch also allows you to enforce the use of Extlinux
exporting the DIB_EXTLINUX variable.
Change-Id: I88fa792a0bd19cacca167134f2054b11c807a451
This patch is part of a another big patch that will implement a fallback
to Extlinux in case GRUB2 is not available in the system. The reason why
it's being splitted in two patches is because git is not being able to
recognize the file changes when the rename happens in the same commit.
Change-Id: Ic2027dfa057fd6d62b532203b7ff50c3c739bccb
If you have an EFI host but the image doesn't have the EFI modules
installed the grub-install command will fail in case the --target
argument is not set. The problem is that the grub-install script will
check whether the /sys/firmware/efi file exists or not to determine if
it's an EFI installation, but this value comes from the host, so this
patch will look for the /sys/firmware/efi file and will also check if
the EFI modules are installed in the image, if not set the --target to
a non-efi platform.
Change-Id: I4481b43e4a8fe4144be9c7eb9d9c618bbb2df21e
In the 51-grub hook, after the GRUB installation, the script will look
for a GRUB configuration file and in case it's not present one will
be generated using the grub-mkconfig command. The reason why it have
to be done is because the new Fedora 19 cloud images is using extlinux
by default.
Change-Id: I80b15b3122698d98ac4d47dc06faf5909a90ab00
The images produced by the diskimage-builder have their filesystem with
a label of "cloudimg-rootfs", so we need to change the default /etc/fstab
on fedora to reflect that.
Change-Id: Id1bb00cb81cb200a114f500e26272624be577da0
Qemu-nbd does not perform well with older versions of qemu due to
the lack of writeback caching mode. It also only builds qcow2 images
and there is a desire for raw image support. Finally, qemu-nbd makes
it very difficult to build images concurrently due to the somewhat
opaque nature of how it selects a /dev/nbd# device. losetup, on
the other hand, makes this process very straight forward.
Change-Id: I309fad8af4fd1e8d1720c17b65e1897a76d5e897
Co-Author: Clint Byrum <clint@fewbar.com>
