The main reason for using the stage4 is now gone (kernel compile).
Install and use the distro provided binary kernel package.
In addition to this, set the locale and timezone, beyond that very
little was done in the gentoo stage4.
Change-Id: I541b7d9b807e2357398ae1c249b1978958dd1137
Signed-off-by: Matthew Thode <mthode@mthode.org>
As of recently, opensuse-minimal images fail to build because of an
error installing the kernel-default package:
> Problem: kernel-default-5.6.12-1.3.x86_64 requires mkinitrd >= 2.7.1, but this requirement cannot be provided
> not installable providers: dracut-050+suse.61.g0fe0e854-1.1.i586[repo-oss]
> dracut-050+suse.61.g0fe0e854-1.1.x86_64[repo-oss]
The problem is there is a recently added package `busybox-links` which
provides a subpackage `busybox-xz` which provides the /usr/bin/xz
utility. Since this is available, the `aaa_base` package installs it
during the root.d base installation phase to fulfill it's dependency on
/usr/bin/xz. On the other hand, the dracut package explicitly requires
the `xz` package, and this is not co-installable with the `busybox-xz`
package, so the dracut package is not installable during the install.d
phase. This change explicitly adds the `xz` package to the initial
chroot provisioning phase so that the /usr/bin/xz requirement is already
fulfilled and `busybox-xz` does not get installed.
Change-Id: Iba8c301eb496657873963e1aa99736aacf87cb00
This reverts commit 6e549c33ac.
It uses the new multiple-parameter matching format from
Idff7b067ad4255e6fc4138f7eff313a81b75c8ba to actually do what it says.
Change-Id: I4656ff1a5c46bcfbd8587f2f541825f4ad08820f
The change Ia6f10741fa6be24b11d6991c8a6b6e07951ff68d introduced having
"when:" as a list of values. However, this was actually not
sufficient to express the logic required for arm64/x86_64/xenial
kernel matching we wanted.
Because the package name is a key, we can't have multiple entires in
the package-map YAML files. This means we can't do more advanced
matching and thus we need to be able to match through multiple
parameters. Similar to Ia6f10741fa6be24b11d6991c8a6b6e07951ff68d we
modify the matching rules to allow a list.
A an example of using this is provided in the README.rst, and this
same example worked through by the unit tests.
This also slightly updates the matching logic to be more sequential.
After each check we either continue on or log the failure and continue
to the next check (rather than set a list of flags then check that at
the end). This makes it much easier to understand what is being
matched in the logging output from the tool.
Change-Id: Idff7b067ad4255e6fc4138f7eff313a81b75c8ba
This gives us better linting of YAML files that just opening them.
This would have detected the duplicate keys in
I34e27d821fbefe274e7b007f37b0bd34db2e1d26.
The .yamllint is taken from zuul-jobs where it is also used as a
fairly sane set of default rules.
A few minor newline fixes are added.
Change-Id: I96d6644ae24f7deb84fa50fefbda0f0d33e0e009
This reverts commit 14ff8f942c.
This seems to not be installing the kernel at all, and needs further
investigation.
Change-Id: Ifd809d4b67aff5d80f979235db246a16af0375b3
Only install the HWE kernel by default for Xenial. This was actually
installing the 16.04 HWE kernel on Bionic by accident, since it seems
to have that package; however it was breaking Focal.
On the other distros, just install the default generic kernel. Let's
KISS for now if we can ...
Change-Id: I34e27d821fbefe274e7b007f37b0bd34db2e1d26
Allow the "when:" statements to be a list of values, which are
effectively anded together to filter the package install.
Change-Id: Ia6f10741fa6be24b11d6991c8a6b6e07951ff68d
New versions of flake8 fail as "l" can be confused for "1" apparently
(E741) ... not sure I totally agree but since it's only one instance,
update it.
Change-Id: Ic5c47867facd56b53cc6534da4ae3a345c516202
This should be installing the python2 and python3 packages (that's
what pip-and-virtualenv is designed to do), but we dropped the +=
accidentally in ee9ad32b6f.
However, we've moved on anyway and after
I7a6a342461d6001c25e55638ba9b7438c28f2519 F31 doesn't support this
element. fedora-latest is already updated to f31 in the opendev gate.
Remove the testing as it is no longer relevant.
Change-Id: Id696a90baa1eb05cb4c08501f8dac3665d395682
This showed up with dnf in containers when TMPDIR was set; dnf started
trying to write to this directory while in the chroot.
We already do stripping like this in run_in_target -- but this is a
bit of a unique place because it's actually setting up the initial
chroot so the target doesn't actually exist yet; so we just hard-code
it in place here.
Change-Id: If7310cb820846da903bf60daa4486c8bf7cb0136
This is an alternative approach to commit
68bb43535e. I think this proposes a
better overall solution that the prior change which had the Python 3
packages being installed, but did not specify the _do_py3 flag to do
the installation steps that redirect the various tool installations.
Fedora 31+ doesn't have python2, and Tumbleweed does have some Python
2 support but there seems to be no reason to bother updating this
element for either with infra very close to removing this completely
[1]. Error out on these platforms, and add a release note.
The 15 path should include the python2 and python3 packages, along
with the flags to do the "cleanup"; i.e. forced removal of distutils
packages that pip 10+ won't touch. As mentioned in the original
change, the six package causes problems here, but we can clear that
too by explicitly listing it instead of letting it come in via
dependencies. Again, this element will be removed from the infra 15
builds ASAP; but we can release with this to provide a roll-back point
if we need to revert the removal to fix things temporarily.
Add it to the testing path as well.
[1] https://docs.opendev.org/opendev/infra-specs/latest/specs/cleanup-test-node-python.html
Change-Id: I7a6a342461d6001c25e55638ba9b7438c28f2519
When I tried to build CentOS8 image for AArch64 I got error saying that
MBR is not supported. So make sure that it will not be used by default.
Change-Id: Ib67ab7f808d727c3c61932c540d398dbe723972f
openSUSE Tumbleweed is dropping python2-* packages so we need
to stop intalling them. We can also stop installing those
for Leap 15. which avoids a pip uninstall issue (as python2-six
was still built with distribute).
Change-Id: Ie93c8addb26aab3d0154c4b5b52423799abede91
We're ending up with "centoscentos" in the mirror location and the
build fails; strip out the $contentdir from the original too.
Change-Id: If09dbbd8028ea510d2ab0d3d8afe484cea611df5
If the running kernel of the system building the image
matches the kernel that is to be removed dnf will fail.
Repalce use use of dnf with rpm -e.
Closes-Bug: #1623409
Change-Id: Ie2481ea8a02b7b0720e46fa179f24badf4aa25c5
This element is designed to install latest minor versions of different
python releases, like py27, py35, py36, py37, py38
into stow directory, and later easily enable them with stow.
Change-Id: Iab6d20e7643e549b53c629fb430e58b1c5e72991
Sometimes an element needs packages installed so that it can
perform tasks but those package are not appropriate for the
final image content. Add a "build-only" flag to package-install-squash
which will cause package to be installed at the beginning of the
phase and then uninstalled at the end of the phase.
Change-Id: Ie01b795991710c93f6b669c8f14b57eb4412c1d5
All the platforms we care about now have python3 with venv (even
centos7 now) packaged somehow. Add an ensure-venv element to make
sure that "python3 -m venv" works. Any other elements that wish to
install non-distribution-packaged Python utilities can use this to
keep them separate from the main system installs.
Port glean to use this, and drop its dependency on pip-and-virtualenv.
Change-Id: Ic16f134fe34293bb68e7c632dd320f523366320d
This causes problems for other projects incorporating dib; we don't
have a specific need for a cap.
Fix a few issues, mostly spacing or regex matches. No functional
changes.
W503 and W504 relate to leaving artithmetic operators at the start or
end of lines, and are mutually exclusive and, due to "ignore"
overriding the defaults both get enabled. It seems everyone gets this
wrong (https://gitlab.com/pycqa/flake8/issues/466). Don't take a
position on this and ignore both.
Use double # around comments including YAML snippets using "# type: "
which now gets detected as PEP484/mypy type hints.
Change-Id: I8b7ce6dee02dcce31c82427a2441c931d136ef57
* Add "centos" element, a CentOS version-independent element. This is in
line with the same work done for RHEL in Stein cycle.
* Deprecate the centos7 element. CentOS 7 support itself it not
deprecated though. The new "centos" element provides the same support
level as the "centos7" element.
* Add functional testing
The default CentOS version is 8. You can adjust it using the DIB_RELEASE
environment variable.
Change-Id: I373ba2296c4613765676e59aabd9c651345298d1
in CentOS build case building an image with "iscsi-boot" and "dracut-regenerate" will exit building because of statement "[ "$found" = 0 ]"
Change-Id: I1a6d60e9ec5f5cb508866c8376465c3e73551a30
On IPA we are using efivar and efibootmgr, we already added the
packages on ipa-builder.
Adding the pacakges on diskimage-builder, so that people who use
it to build the images won't get into trouble.
Change-Id: I9ab6588f20302b4808b09dc060aced5fd267a3d2
Debian default Python interpreter version is 2.7, but it's
possible to install a Python 3 interpreter from the base
repository.
With this change, if we set DIB_PYTHON_VERSION to 3, we install
the python3 package from base, with python3-libs, python3-pip and
python3-setuptools, and redefine python_path, effectively allowing
Python 3 interpreter to be used in Debian.
See a result of the job for building the ipa image here:
https://review.opendev.org/705773
Change-Id: Idabfa94c2bff6e0de6daa0866084d5db14d7dcb0
When there is a hashsum mismatch diskimage-builder forces downloads
with the -f switch of cache-url. This is currently broken because bash
escapes the quotes in curl_opts. This tricks curl trying to download
'no-cache' instead of the url. This can be fixed by using an array for
curl_opts which does the correct thing here.
Change-Id: Id9f1579dda9a3e0a2b08dd5faaeef0e2e580d419
Add a basic test to ensure that all elements have a README.rst file.
This way they will be exhaustively listed in the Sphinx documentation.
Add dummy README.rst for 'disable-selinux' and 'rpm-distro' elements.
Change-Id: Ia5252ddd89b5ae5c6e9a12a66ef10f912fd54da5
