As described inline, we need to ensure the underlying directories in
the image are correctly labeled, or we get all manner of services
failing during boot with selinux in enforcing mode. Although the
problem is generic, this first shows up in Fedora 30 as systemd has
become more strict about namespace failures (I think) [1].
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1663040#c22
Change-Id: I52c1cc719884879169b606b00651aa26f5b783f1
This patch adds option DIB_YUM_MINIMAL_EXTRA_REPOS to yum-minimal to
allow DIB users to include extra repositories to their final image.
Change-Id: I89549f4b0f4c9470143b5064817acab5043e31c5
Something (possibly [1], but that change is at best cryptic) has
changed such that we don't get correct /etc/os-release files
installed. This flows on to grub half-installing itself, enough to
not fail the build but not enough to make something bootable.
Installing the -cloud release package gets it back, and seems like a
sane choice for dib.
[1] 617b1bed34
Change-Id: Iff0413887fad798273b2bfcb140cc07f36d54a04
As noted in the change, 7fd52ba841
increased the size of the EFI partition considerably. This has meant
that our padding upwards of the disk size is insufficient and EFI
builds (arm64 in particular) is failing due to out-of-disk errors
during final image operations like installing kernels.
Similar to the discussion we had in
I65fa13a088eecdfe61636678578577ea2cfb3c0c, this feels a bit ugly
because we're mixing logic here with sizes specified in block-device
config files. But it boils down to the same problem; we are
calculating the disk size here and passing it to the block-layer, so
unless we want to make large changes to the status quo about where
these sizes are calculated, small adjustments here are the most KISS
solution.
Thus we check if we have selected the EFI bootloader element, and thus
assume there will be a large system EFI partition and expand the disk
size accordingly.
Change-Id: Ifa05366c2f2b95259f3312e4dde8c85347075ba1
This debug statement lists every element found and its dependencies on
every build; it's just noise unless you're debugging the element
dependency solver itself. Remove from output.
Change-Id: I9281b953d958a3fd5e20edbc560a341a2fcc3deb
This seems to miss the exit code of the dracut process, which actualy
caused some issues in I8511669e188717494daf2bc1384a6dd346f942a4 where
it would have been much clearer to stop after the initramfs generation
failed.
Add some debug messages, and catch any errors from the final call.
Change-Id: I6f89441ec4709f5199535e15a7cc53a3a8af273d
Should install "grub2-efi-aa64 grub2-efi-aa64-modules" instead of
"grub2-efi grub2-efi-modules" for arm64
Change-Id: Iee3191b0944b3b862890d166a9d36bd592fe8f7e
Closes-bug: #1839816
- DIB_DISTRIBUTION_MIRROR_UBUNTU_IGNORE matches when it is empty or not
set and DIB_DISTRIBUTION_MIRROR is being used. Checking for it being
set and not empty solves this.
- Normalizing bash conditionals for readability
Closes-Bug: #1808359
Change-Id: I87853fcda4c8b29a3f1720a2778debeb3acc3a53
Signed-off-by: Manuel Torrinha <manuel.torrinha@tecnico.ulisboa.pt>
The 'pypi' mirror element is generating invalid pip.conf files
when more than one "DIB_PYPI_MIRROR_URL" is specified.
This patch fixes the pip.conf file rendering to use a proper form
when there are multiple "extra_index_url" provided.
Closes-Bug: #1839558
Change-Id: Ibda0e7390955683560e09b486f636775643ff57c
python 3.6 warns about regexes like:
DeprecationWarning: invalid escape sequence \+
I noticed that debugging a trove job and it really led me in the wrong
way. Fix this with making it a raw string.
Change-Id: I58ee1a49d62316c6c3f0588832c97f659f7e460b
Per the inline comment, a machine-id is required for kernels to
install correctly (this may well be a bug, but the linked issue
remained inconclusive).
Add a call to make the machine-id before install packages.
Change-Id: If75d04376e62bfdfe14ee3ca4d0bd5c8b383c1b0
Redhat-Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1737355
The 17.1 profile changed the defaults used in portage for where we store
our repo, distfiles and binpkgs. Some portage related variables need to
be set deterministically. 17.1 is no enabled for Systemd's profile.
Change-Id: Ib55f6875c5cb461c3c530b51d7420ce3dc8da360
This element configures systemd to send its journal to the console,
which can then be retreived by server commands. In the case of
nodepool, if the image failed to boot the console will be dumped into
the logs when nodepool decides the node is not responding. Having
this can be very helpful diagnosing early boot errors.
Needed-By: https://review.opendev.org/#/c/669787/
Change-Id: I6b6df7023acb6b2f967b84840bc4b542ebc03727
This is helpful because if the inner host fails to boot, nodepool will
dump its console at debug level
Change-Id: I8d97e4378dda176521361ca03deac8337a059515
Depends-On: https://review.opendev.org/#/c/669939
Newer versions of open-iscsi seem to compile on Gentoo / musl. Use them
if we can. This also removes the cap on open-iscsi.
Change-Id: I596cb61494e459a419bce6a63deff89f9e78fe23
To avoid breaking systems that depend on released versions of
dib/glean (eg, nodepool), add one non-src nodepool job.
Change-Id: Ia8db42754429c79a80f6e8be545be2e48f019994
Previously we were trying to enable dbus-daemon service on all prior to
fedora 30. Unfortunately 28 and older don't have this service so this
broke those releases and only worked for 29. Fix this by only enabling
this service on fedora 29.
Change-Id: I1bd15dcf0bbe270afccb0c0c3ea6ad08862a53f1
The linux kernel and NetworkManager fight each other over control for
interface management when router advertisements are in use. Long story
short if the linux kernel configures a network interface for ipv6
before NetworkManager attempts to manage that interface then NM will
ignore the interface and not configure ipv4 on it.
This can happen because the kernel is configured to send router
advertisements solicitations which result in router advertisements which
the kernel uses to configure the interface(s). There is a default of a 1
second delay before sending the solicitation which in many cases is long
enough that NM has started before then. However, in slower environments
like those used for testing with qemu this isn't long enough.
Some testing by hand indicates that 15 seconds is about right so
increase the delay to 15 seconds via sysctl.conf.
Note this may increase boot times in ipv6 only environments (though it
is hard to be sure due to how systemd starts everything at once and does
socket activation and the like).
Change-Id: I475a253091cbaf63687b91c748c31a6753bb0f57
When virtualenv and setuptools gots installed from source and rpm
then their installation path lives at different places but when
the python script got called then that time it choses either of
rpm or source based path on system wide installation and leads to
different failure as their methods are not implemeted.
So by setting _clear_old_files to 0 will install
python3-virtualenv python3-pip python3-setuptools from rpms only
and avoid these failures.
Change-Id: I0c162f1fe8168513e352546ab8dd2b68fa65b88c
Signed-off-by: Chandan Kumar (raukadah) <chkumar@redhat.com>
autounmask=y (default) changes portage depsolving, causing errors
(mostly often seen in perl and binpkg related issues).
Disabling this functionality for DIB builds is OK as the enviroment is
not passed on post build and the build process is not interactive
anyway.
Change-Id: Ife9ace246bec16864ee4982bc456763af5dff2e8
Signed-off-by: Matthew Thode <mthode@mthode.org>
debian-minimal depends on debootstrap which depends on dpkg
This needs to be installed early as dpkg installs the apt keys early via
02-add-apt-keys in pre-install.d
Change-Id: I8580849ceaa7a5152c94f29afa890ac6d6983fb1
This change removes useless statement accidentally added in the
06576a02f0
Change-Id: I7ea4a24d8c72c9e72f5f87247403af0f9bf69b40
Signed-off-by: Maksim Malchuk <maksim.malchuk@gmail.com>
There are several jobs depending on working opensuse 15.1
images in nodepool, so it makes sense to ensure its working.
Also upgrade the previously marked experimental opensuse-15.0
job as it tests the xenial->opensuse combination, which is
particularly difficult to keep working and we'll need it in
the CI.
Change-Id: Icb6d998756ce5221e017959dcb59b21f0f023454
These are new nodepool functional jobs designed to give more
flexibility to the DIB/clean projects to define what they need
to test. Otherwise, they behave very similarly to the current
nodepool functional jobs
Depends-On: https://review.opendev.org/665023
Change-Id: Id73e913300cf3f0aaea05f7c2e8fdcb753421d04
There was a project stanza in zuul.d/jobs.yaml which was unexpected.
Move it to projects.yaml and combine it with the one just added.
Change-Id: Ie3b2e31833423ae8658861e8cc85300d45882f8e
This moves the Zuul project configuration into this repo rather
than project-config for easier modification of check/gate jobs.
Change-Id: I235a0584d2b0156406b2d07848d484a9148d064e
This patch adds a new environment variable to the ubuntu-minimal
element called DIB_UBUNTU_KERNEL that allows you to specify the kernel
meta package that will be using to install the kernel inside the image.
It supports "linux-image-generic" (The default), "linux-image-kvm", and
"linux-image-virtual".
This allows building images that are smaller in size (~200MB smaller
qcow2) that have only the kernel modules necessary for virtual
machines.
Change-Id: I8ce65e1d357d15e8ed8995ad1dcaea02bbd1986f
