Relabel the filesystem during image builds if SELinux is supported
in the kernel of the build machine and userspace tools are available.
Otherwise touch /.autorelabel to schedule a relabel the first time
the image boots. We relabel when possible because it decreases first
boot time.
Change-Id: I0bec885d6e5d4f4e1106f3bd2a90ba5f86395b07
Partial-Bug: 1347845
Skip the contents of /tmp/ when creating tarballs with the results of
debootstrap, as that directory contains just ccache cache (and in
general temporary files).
Small (positive) side effect is that deboostrap tarballs gets slightly
smaller, something like 2-3 MB less.
Change-Id: Ib4adf3dc908f02deed408bf9188f032767eeb2bb
Just remove globally /lost+found after the root and install phases, so
distribution elements don't need to do that by themselves.
Change-Id: Ic783e613bd8794aefd3f40c9a7c308d14cd04b8d
Grub installation happens in finalize.d so cleanup should be done after this.
This reapplies I6322b8b529e31fd1b7251dd9e07cc85f442f7e81 after the revert,
but working.
Change-Id: Ie1873e64d407552da37a8dbedc13c3adbf79c085
Some extlinux packages install mbr.bin under /usr/lib/extlinux or
/usr/lib/EXTLINUX so tese directories need to be checked as well.
Also, there are packages that create a /boot/extlinux directory
which needs to be taken into account. Finally, commit
bccffc8bfd dropped the /boot prefix
from the kernel and initrd references in the ext/syslinux config
file which is simply a bug that needs fixing.
Change-Id: Idb071c9b18ff557b0f0f76d0d754536f2deca904
Closes-Bug: 1335042
This mapping is not needed anymore because mariadb-rpm element
(renamed from mariadb-rdo) uses pkg-map.
Relies on: I90e7ca4803516b86179b0f6639e307a60297960b
Change-Id: I19fb44ee6008c6c57dd331a780eec3234d46b15c
UBoot needs the kernel and ramdisk to be post processed
using mkimage utility. This element helps user do it as
part of the DIB process.
This element needs u-boot-tools to be installed.
The load address and entry point for UBoot kernel can
be specified as shown in the example below.
Example:
export UBOOT_KERNEL_ADDR=0x80000
export UBOOT_KERNEL_EP=0x80000
Change-Id: I0e1039bf57d1ef11a3f9831d82e24b1ec2136c13
This calls chroot as a non-root user, which will always fail with
EPERM.
This reverts commit ab2d1a31f2.
Change-Id: Ie674fef694ad66e1ebc22083dec2a0bc34371e7b
Includes "Don't match editor backup files in environment" and "Order
execution of environment.d scripts". These had to be squashed because
the first change alone changes the order env.d scripts are sourced in.
The current glob match for environment files can source editor backup
files (foo.bash~) which will override the real changes you have made.
Other parts use the regex to avoid matching such files, so do
the same for environment file matching. Note this has to match "."
unlike the other regex, as most env files are "foo.bash"
Also sort the files before sourcing them to ensure a reliable order.
This change should be in line with current expectations, given the
convention is to numerically prefix scripts in this directory.
Update of: I934486b3ff5884063d29c6d9b66fd9b11140464c
Subsumes: Icc509f695d7a15a8026d8c7e463f06acf65499d7
Change-Id: Ibfb562c5970b40598fc95da1e8d4beb9d51d7612
This change adds support in ramdisk element for recognising
boot from virtual media cdrom and read the parameters from
the configuration file in virtual media floppy.
Change-Id: I28ca888b4ead4905f7141b38ed4b9a3614d00d26
Closes-Bug: #1321564
This patch updates the RHEL7 element to work
properly now that it has changed from beta to
release status. It includes a repo update to
locate os-config rpms not in epel yet and an
update to the latest cloud image name.
Change-Id: I05607d62193c8f8fb1c1bece9872d456b19c5a08
There are some situations where the list of packages to install
in a image is blank (packages blacklisted).
Change-Id: I315f97fe619c25b36cf47ed1b7a65936b753312e
After running through pkg-map we could have no packages to install,
if so, don't attempt to run a malformed command.
Change-Id: Ia8e0aed62bcf814bf85c86b54ff0837da49ae7dd
We need to be able to do install.d like things for ramdisks
themselves, but install.d runs outside the ramdisk context - and its
likely to break peoples brains if we mangle the two together - so this
adds a new hook point, ramdisk-install, specifically for installing
things into the ramdisk.
Change-Id: I37d1660309cda6e28bd0b316b08f61db4e080613
Initial support for a centos7 image.
This is separate to rhel7 because the major differences are things
like repo and image locations, which are always going to be different.
We should merge any real changes into the redhat-common layers.
Apart from the added support files in centos7/*, the other change is
mostly modifications to redhat-common's extract-image to handle
different partition layouts of the centos7 image.
Change-Id: I943abe5ff0a803f36eda266a79af0d9220edcae7
The default value points to old image name
which results in 404 error. So updating the
value to point to correct name.
Change-Id: Ia66f0cf4f4167926892a0786467412d277ebffc3
This change adds support for retrieving the IP
through DHCP if 'ip' was not provided as a kernel
command-line argument by pxelinux. This is used
when the kernel/ramdisk is booted by virtual media.
Change-Id: I1097ce5b56ad40f2d6dc3181681d54f924ec7145
Closes-Bug: #1321563
Problems were seen when building images in parallel with
git clones and fetches interfering with each other.
Stop it.
Co-Authored-By: Michael Kerrin <michael.kerrin@hp.com>
Change-Id: Iaa48f259755d8b22327459a5c6d224a342909aee
The last patch to do this only handled the case of SHA256SUM being
stale, but the image is more likely to be stale in the default
configuration as the hash file is downloaded over HTTPS.
Change-Id: I6531fa684e560cad48c3696394d48a600680c875
Closes-Bug: #1336067
When the call to pkg-map fails, it prints the error to stdout. However,
this output is lost when pkg-map is executed in a subshell, so the
actual error is never seen. This change adds an explicit echo so the
error is shown.
Change-Id: Id6f4fae6acadfe2839b408fb2dd11fb65d65df6e
Optimized the creation of directories by using the Brace expansion mechanism.
And corrected the dirname resolution to follow correct convention.
Change-Id: I048c04385d2706c4e38f8548555a59b0437e1fcd
This reverts commit 32eda4b92f.
I noticed today that environment.d files no longer seem to get sourced
by DIB. Reverting this commit fixes it.
Change-Id: I08a8feab541901c8fd0a803628f5aeb6c0eec598
Closes-bug: #1339116
Some users on corp networks are finding that cloud images appear in
their proxies before SHA256SUMS files.
We now try to force any to upstream proxies to update their copy and
retry the checksum, rather than immediately failing.
We also now add proper argument parsing to cache-url, and associated
help functionality, since we have now grown our first argument.
Change-Id: I44d44b62db8d1df990606fdf087ec1b837f491f6
Closes-Bug: #1336067
There are some situations where the list of packages to install
in a image is blank (packages blacklisted) on opensuse based
distributions.
Change-Id: Ib720473fa63671ed974d41a86fe10a9b10720f5d
The current glob match for environment files can source editor backup
files (foo.bash~) which will override the real changes you have made.
Other parts matche use the regex to avoid matching such files, so do
the same for environment file matching. Note this has to match "."
unlike the other regex, as most env files are "foo.bash"
Change-Id: I934486b3ff5884063d29c6d9b66fd9b11140464c
Rename rhel 10-yum-blacklist to 10-rhel-blacklist to
avoid future name conflict with a yum element blacklist.
Change-Id: Ic2136a06e1ec8f19908ada978782733d5fa7cacc
Force LC_ALL to C to allow printf to work independently
from the locale. Gives invalid number error if run in non-english
locale.
Change-Id: Ia68853505485fefbf0890313456e7edb6097666b
Closes-Bug: #1335932
This patch updates the openSuse element to work with the new
base image file format. It should be noted that the base image
file name has changed several times while updating this element,
and and may need to be set manually via the "BASE_IMAGE_NAME"
env var.
Change-Id: I4dac8bf9a4bf76a00d4a04cbf063fd245b11f3d6
The $DISTRO_NAME var is now set in all of the OS elements
in environment.d. This patch removes the call to
lsb_release and instead uses the $DISTRO_NAME variable.
Change-Id: I7088eb88b6a3611fef5a21a6b62975876549465f
The current "redhat" os family omits RHEL7. The rhel7 element has the
corresponding $DISTRO_NAME set in environment.d. This patch adds rhel7
so a pkg-map json file using "redhat" for the os family will work the
same as rhel, centos and fedora.
Change-Id: If6b4cbba618167669a499e6121f234942ca9367a
Several elements were using almost similar code to
get the current kernel and initrd inside an image.
After factoring out this code into a common element,
modify the elements to make use of it.
Change-Id: Ib547cd96b2b354b1c97342cacf5f0d0a3f70a3da
It may be desirable to specify file://tmp/pypi as one of the list
of mirrors specified by PYPI_MIRROR_URL, so the local pypi mirror
should be mounted as long as the directory exists.
Even though the path is mounted, it is only used by pip if there is
no specified PYPI_MIRROR_URL, or if one PYPI_MIRROR_URL entry
specifies file://tmp/pypi.
The pypi element previously assumed that a local mirror would be
a complete offline mirror. This change allows for a mixture of
local mirror plus remote mirrors. This means that the local
mirror could (for example) contain a few locally built pip packages
from arbitrary git checkouts for gate testing of those projects.
In this scenario, most packages would be downloaded from the
configured remote mirrors.
This change is required for synchronous gating on the os-*-config
tools.
Change-Id: I0f6d153c06993ffd0d90bd8ca1717462e8b6b541
Encapsulate the new select-boot-kernel-initrd common function
into an element so other elements can make use of it.
Change-Id: Ie587bd5dae1afebfd5646190dfa951a7949938cd
Debian based distros do not enable the serial console by default
in grub.cfg, instead sending all boot messages to the display
Change-Id: I0e80859198e77862ab0301ab27ebe11702fba09d
Ensure cache mount directory exists before its used. The zypper element
would error when attempting to mount the cache directory because the
mount point did not exist. This patch corrects that.
Change-Id: Iaa3c2a0254b12bd847643a61a99f5a234097fd21
Scripts in pre-install.d run as root so there is no need to sudo commands.
This patch also helps avoid an error when sudo is not installed in the
default image.
Change-Id: Iab20edfb161189f8c4e0cfa7d6946f63163d6413
The DIB_CLOUD_IMAGES variable in ubuntu's root.d is already used
everywhere with a /, so we can safely drop it from the default
value.
Change-Id: I39dbd3f4004052fcccb4131dc838759f4c82312a
With this change package name to distro mappings used
within the base element are now stored in the top
level pkg-map file.
Additionally, all bin/install-packages commands are updated
to use the -m option so that the base element pkg-map
namespace is used by default.
Change-Id: I3bdbf987c8525f9ef67ca0c263651d6613f29ef0
Updates the opensuse element's bin/install-packages script
so that if supports using pkg-map instead of map-packages
for package mapping. To make use of the new change
simply add the -m <element name> to allow install-packages
to know which element namespace to use when installing packages.
Use of the new -m option is off by default.
As part of this change we also updated install-packages
to use getopt for in script argument parsing.
Change-Id: I56da8adf6c445c50c7642e221c6c11ba59330404
Updates the dpkg element's bin/install-packages script
so that if supports using pkg-map for package mapping.
To make use of the new change simply add the -m <element name>
to allow install-packages to know which element namespace to use
when installing packages.
Use of the new -m option is off by default.
As part of this change we also updated install-packages
to use getopt for in script argument parsing.
Change-Id: Idfc40f2d75828a0f09d227f0332ccef8f0183efc
export $SYSTEMD_SYSTEM_UNIT_DIR to know where .service files should be
moved.
So far those files are moved directly in /usr/lib/systemd/system whereas
Debian use /lib/systemd/system.
We load the value from the systemd pkg-config file.
The patch don't use pkg-config directly for three reasons:
- environment.d files are run before install.d and the other similar
targets, making hard to install an additional dependency
- the .pc file can easily be parsed using awk
- pkg-config package name is not standard across the different
supported distributions
$SYSTEMD_SYSTEM_UNIT_DIR default value is /lib because, as pointed by James
Slagle, /lib is actually a symlink to /usr/lib/ on Fedora and will work
for Debian and Fedora.
See: https://bugs.debian.org/719634
Change-Id: I413a92284e6a79e7fcdde99c5138bc3ce8e85e80
The 'None' Datasource does not exist in precise 12.04 (which uses
cloud-init 0.6.3), so conditionally ensure that we are not including
this in the datasource_list in case we're building a precise image.
Partial-bug: 1329068
Change-Id: I6efb91e17bf896bbf7d67c31c4eb5098d5d61a71
We use an element remove-serial-console in image elements.
Renaming this element to match. Also renaming allows us to use
the serial console in devtest runs.
See - https://review.openstack.org/#/c/86272/
Change-Id: I8f1138f58d0046ccdeefa3decc45c36d95c6bf4b
diskimage-builder/elements/base/cleanup.d/99-tidy-logs added
to tidy up (remove) initial logs files on disk images.
Makes for slightly smaller images, and easier times tracing post
boot issues.
Change-Id: Iee98b5d818e080bcd9635482bc29349a71938087
source-directory ifupdown directive has been introduced in version
0.7.44. Wheezy comes with version 0.7.8.
Without this change, the eth0 interface will never get an IP address on
Wheezy.
Change-Id: If40ed3b82ca78280190b66c06a0a77bb71270d7d
The script to find best kernel from image (used by vm
and baremetal element) is duplicated and is not in sync
with each other. Moving the code to img-functions as a
function will reduce duplicated code and make it reusable
in future.
Since img-functions is not accessible in chroot env,
kernel selection is being moved from finalise.d to
cleanup.d in the vm element.
Change-Id: I8fbccc13a2c61a5191ef9ea5d2a8302a3e43b000
Updates the 51-install-tgt and 52-install-busybox files
in both the deploy-ironic and deploy-baremetal elements
so that they have unique names.
While an end user would never use these elements at the same time we
should always use unique names for things per DIB conventions.
Change-Id: I8926870e45849341c10b2d479ddee45f9b625e2b
While an end user would never use these elements at the same time we
should always use unique names for things per DIB conventions.
Change-Id: I53b10522183e8566c62922b91878e5cf767fe2c6
Both the rpm-distro and redhat-common elements had the
same exact 00-usr-local-bin-secure-path. This commit
deletes the one in redhat-common and leaves the one
in rpm-distro (which is also required by the same
elements).
Change-Id: Ie9ef29d268b3737a6741fce016ef335db6651b59
While an end user would never use both redhat-common and ubuntu
elements at the same time we should always use unique names
for things per DIB conventions.
Change-Id: I2cabc583a1fd41d4fe7fbf8cf93127d49e26aff4
Updates the yum element's bin/install-packages script
so that if supports using pkg-map instead of map-packages
for package mapping. To make use of the new change
simply add the -m <element name> to allow install-packages
to know which element namespace to use when installing packages.
Use of the new -m option is off by default.
As part of this change we also updated install-packages
to use getopt for in script argument parsing.
Change-Id: I19240e74b69859f7faf9cd80440633234a677d63
With this patch, /var/cache/apt/archives directory content is preserved.
The directory is actually a bind mount of the
~/.cache/image-create/apt/$DISTRO_NAME directory, much like what we do
for ccache.
You can use DIB_APT_LOCAL_CACHE=0 to disable this behavior.
This trivial change improve performance A LOT (>30%), even if a local
HTTP proxy because:
- there is no need to copy again and again the same files
- we avoid network latency
The patch has been tested with Debian and Ubuntu with every elements
from the tripleo-image-elements repository, the final size of the cache
directory is about 700MB per distribution subdirectory.
Change-Id: I4fab499493f734c7c546d4d23b1a98f0e7523a39
OVS service is called:
- openvswitch-switch on Debian/Ubuntu
- openvswitch on RHEL/Fedora
This changes is needed to get the neutron element to work
on Debian/Ubuntu with systemd:
I6e3df30dc3a6918f3a949a7dac47289ede5c3d1f
Change-Id: I2748a9db7f8ee456698187a9646bc7cda2256fe7
This change adjusts the "inline" python function used to profile
run-parts duration to make it run successfully on both py2 and py3
Change-Id: Ib5287a56b8e2b3e882dca489192f01d9f01cd8ba
Now that issues associated with this bump have been addressed
elsewhere, reinstate trusty as the default DIB_RELEASE for
the ubuntu element. Also adds a note about memory requirements
to the ramdisk element.
Change-Id: Ia89c83ba0ee4ad3bd89b833ba0db08135eac63ed
Default to only having cloud-init query Ec2 on first boot for Ubuntu,
until cloud-init has been SRU'd to fix the CloudSigma data source issue
that causes Trusty boots to hang.
Change-Id: Icb3734d5ae78f4a0a6c0fae1af4a2ce3c809308c
Partial-bug: #1316475
This patch removes a couple of lines of redundant code. In Python,
the get method on a dictionary defaults the return value to None,
so the method never raises a key error.
https://docs.python.org/2/library/stdtypes.html#typesmapping
Change-Id: I180877f9be23d373cd63771bb3682d6587ec6fac
There is a substitution of suffix in rhel element, like
rhel-guest-image-6.5-20140121.0.x86_64.qcow2 to
rhel-guest-image-6.5-20140121.0.x86_64.raw
The convert is correct but the substitution of the suffix is wrong.
${PARAMETER#PATTERN} will match the string from the beginning and generate rhel-guest-image-6.5-20140121.0.x86_64.qcow2.raw
We should use ${PARAMETER%PATTERN} instead, which is from the end.
Change-Id: Ic45a3f800058ea9e5d746ff543c068a54632407d
This moves cloud-init data source configuration to a general purpose
cloud-init-datasources element that can be used to explicitly configure
the list of cloud-init sources that will be queried on first boot.
cloud-init-nocloud now depends on this new element to configure the
datasource_list while continuing to prep the image for a nocloud first boot.
Change-Id: Ibcc3b86d6ca567a23f89b7a1a36bc713e444ef68
Closes-bug: #1316475
Updates the various operating system elements so that we
set the DISTRO_NAME variable for each distro.
This env var is used by bin/pkg-map to set the default
distribution name for package name mappings.
Change-Id: Ib4b05eb7191dd50d25799a0bac51fd15c01b74cb
Adds a new pkg-map element which can be used to install
packages based on an in element 'pkg-map' JSON config
file format.
As part of this change we expose DIB's IMAGE_ELEMENT variable
so that we can have access to the element names which are being
installed in a clean manner.
This change is intended to decouple elements from DIB
and allow new elements to support multiple distributions
(with various package naming schemes) without having to
constantly maintain DIB's various bin/map-packages files.
Change-Id: Ic0a061995e2ae708c95a535cba6237bff58f7d93
A few scripts were added without set -o pipefail since the original
change to add that everywhere. This will get the dib-lint check
passing again.
Change-Id: I96bef45cc10ff9bbcf2c4f1b796b8cd188e10485
Add the ability to supply a gerrit ref in DIB_REPOREF_* and
have that reference fetched from the remote and checked out for
building within the image.
Closes-Bug: #1314021
Change-Id: I5e5742c4cbff98e14121c50dde5e512f192b5415
Co-Authored-By: Robert Collins <rbtcollins@hp.com>
Using -n for bash arrays was a little bit bad, and also resulted in
errors when running under set -u. Wean the yum element off the array
and switch to a straight string.
Change-Id: Ifd61fce7dadd5820022e9b2ab42020ba0cb71ce6
When using custom-built kernels, their filenames may not necessarily
follow the standard naming conventions for the stock systems in question.
This patch permits the specification of an alternative pattern to use
when looking for the correct kernel to construct the PXE images from.
Example:
export DIB_BAREMETAL_KERNEL_PATTERN="kernel*jang"
export DIB_BAREMETAL_INITRD_PATTERN="initrd*jang"
Change-Id: I86e5254051addd5e89dd4e363e9bba117e65353d
Add support for supplying a custom keyring and debootstrap script
using two new environment variables:
* DIB_DEBIAN_KEYRING - Path to a gpg keyring.
* DIB_DEBIAN_DEBOOTSTRAP_SCRIPT - Path to a alternative debootstrap
script.
Change-Id: I42e8832b435b8a77b0681b5bc9d9332bbe860cd5
Although set -u allows empty WHITELIST=() list to be set, you can't test
-n "$WHITELIST". Looks like the intention of the commit that caused
this issue (Change-ID Iad2d490c86dceab148ea9ab08f457c49a5d5352e) is to
set a policy to prevent future use of bugs due to unbound variables.
Thanks StevenK for pairing with me and helping me hone my bash skills.
Change-Id: I2349c990ba53b0aaecd5119812582c7c848f1e4e
Closes-Bug: #1319987
If the kernel is restricted read (as a security measure) we may not be
able to read it without chmodding it.
Change-Id: Ib577705c27d8c351288334de03a7848cf49f2de9
If 'DIB_RHSM_USER' isn't set, the image build with rhel
element fails because of check 'set -u'. So, we should export
'DIB_RHSM_USER' in script to avoid error during build
Change-Id: Ic63a20e3d91a25bbe804440a5919b035489c60a3
Closes-bug: #1318717
When the cache tarball gets fail the output doesn't indicate
what url is failing. Adding '-x' displays the urls attempted.
Change-Id: I71b2dbfd712e72c591410ca9b68edc76d493ad6e
As with the previous similar changes, this is intended to catch
problems as they happen instead of ignoring them and continuing on
to potentially fail later. Setting this on all existing scripts
will allow us to enforce use via Jenkins.
Change-Id: Iad2d490c86dceab148ea9ab08f457c49a5d5352e
Updates the fedora element so that DIB_DISTRIBUTION_MIRROR can
be used to configure a custom Yum mirror on Fedora. This
implementation replaces the baseurl in each of the default
Fedora Yum .repo files so that a custom mirror URL/path
can be supplied. The URL should point to the directory
where the updates and release directories exist. Example:
http://download.fedoraproject.org/pub/fedora/linux
As part of this change we also remove any existing
metalink settings in the .repo files to cover the case
where an end user runs their own createrepo command
to create the mirror... which means your metadata won't match that
of the normal Fedora mirrors and your baseurl won't get used.
Change-Id: I1a49a2941b1cc489e91a72b87430393cd32e865d
DIB's map-services is currently used in TIE's os-svc-config
binaries to support service name lookups. Many of the systemd
specific functions require bin/map-services to exist.
This change adds bin/map-services files that are noops
to both the debian and ubuntu elements so that as those
distros move towards using systemd they can make use
of the functions we already have in place.
Change-Id: If8d61f3858b11de86c3292e840d033e5e3cecedb
If scripts are not set -e then errors can be ignored, causing more
confusing failures later.
Also adds an exclusion comment to the ramdisk init script since we
don't want that to exit on failure.
Change-Id: Idf43993bd10b1ef16c1d3b0d9df8d0ad94c46458
Adds a new element, package-installs, that provides an interface for
declarative package installs and uninstalls. Packages to install can be
added to an install.d/package-installs-<element-name> file. The set of
packages listed across such files are installed in a single transaction
at the beginning of install.d.
Prefacing the package name with a "-" indicates that the package should
be uninstalled at the end of the install.d phase. Again, the full set of
uninstalls are done in a single transaction.
An element providing a package-installs file should add package-installs
to its element-deps file.
Change-Id: I5b540388eff1079c8dee933b869463371481152b
This commit fixes the if/else block around Debian stable/unstable which
was badly merged during the last rebase.
Change-Id: Ia2eb806da3d7c8d28afffb026f35600c7125d8d7
This makes it easier to work with temporary files - less traps
scattered around higher layer code.
Change-Id: I2fdd93115a7b0d289c2e28f8c133d4059de75b87
This patch adds a debian-systemd element to get systemd support with
Debian.
A backport of systemd is used on Debian Wheezy.
Change-Id: I095c81b2c32844fccf940c97b79054923c25b8c2
Upstart cannot be installed by debootstrap on Wheezy because of a
conflict with sysvinit. sysvinit is flagged a being “essential” and
apt-get will refuse to remove it.
See: https://bugs.debian.org/668001
This patch uses another strategy. We install a standard sysvinit
Debian chroot with debootstrap and during a second step, we
replace sysvinit with the wanted init system.
Change-Id: I081c81b2c32874fccf940c97b79054923c25b8c2
Cloud images expect the primary interface to run dhclient in order
to come up and acquire an IP address. Although we have technology
to manage without this for the undercloud and so on, the seed
still relies on this machinery in order to bring up its first
interface.
Change-Id: I079a679779de760ee9ca6f93cbb22e69a65e03af
Using set -e in all of our scripts will prevent some subtle bugs
from slipping in, and will allow us to enforce use of set -e with
tooling.
This change also adds -u and set -o pipefail in the less complex
scripts where it is unlikely to cause problems. A follow-up change
will enable those options in the complex scripts so that if it
breaks something it can be reverted easily.
Change-Id: I0ad358ccb98da7277a0ee2e9ce8fda98438675eb
In the mailing list discussion, everyone seemed to agree that we
should just be explicit that these are bash scripts since that's
where we're testing them and there's no good way to ensure they
work on any other shells right now.
Change-Id: I86c41d2cddf6e91e7deeb4c2ab51635c80a1ce0c
The phrase is no longer needed as of August 23, 2000 with Nicaragua's
joining of the Berne Convention.
Additionally, in at least one instance,
elements/cache-url/bin/cache-url, its existence in the file between
Copyright lines is just weird and feels misleading, even though it is
not.
Remove all of the lines, because sanity.
Change-Id: I24fd76c2b4f66b8036010b5079db39ead729abee
Trusty ramdisks do not boot, failing to exec init. This reverts
the default DIB_RELEASE back to Saucy until Trusty ramdisks have
been properly tested.
Change-Id: I5ac81822b78805275268cecc021a74a62c22ef58
Nodepool needs to be able to install kernel headers, which means we
need a mapping for redhat systems here.
Change-Id: Ic83d642b5ebe85b042cf7b23b295be74bbe185fa
Provide package name mappings for openjdk-7-jre-headless:
RHEL/Fedora: java-1.7.0-openjdk-headless
SUSE: java-1_7_0-openjdk-headless
See https://review.openstack.org/#/c/86314
Change-Id: I3a351d0f9854f6f320ba145a71ffc66fd02c231c
Unlike the redhat-common and opensuse map-packages maps, the RHEL one
appears to be unsorted. Fix that.
Change-Id: I75c5d2694525731660c2a3b5b58ee696c61923ba
This patch adds support for sysv init to the dhcp-all-interfaces element.
Specifically, it adds a sysv init script and the relevant install/config steps.
Tested with Debian jessie/testing.
Change-Id: I4ae1d5365bafda188cb65ea1fb72d8ffe2408910
I3166951c6fbb2faec53ffc339edd2fd0c3512300 recently landed without two
fixes that I suggested, namely using rm -f rather than testing for
file existance, and a comment fix.
Change-Id: I68e187e20802f3482d4c524a6c435fec7526178e
This change adds extra tests to the
elements/manifests/cleanup.d/01-copy-manifests-dir script to prevent it
from exiting with an error due to non-existant files.
The premature exit condition only seems to happen when an image is being
created without including the "base" element.
Changes
* adding file detection tests for dib_arguments and dib_environment
files
Closes-Bug: #1308224
Change-Id: Iaa8bafb6765241408b9f02d4896913d15f2f401d
This is dependent upon change in tripleo-incubator
I1ff4bb98c99dfe87ccc4fb19767b93e27707d3a7 and concludes the
renaming of deploy to deploy-baremetal
The rename was performed so that each element had a more descriptive
name, and so that each element could accurately set an element-provides
of "deploy", given that the elements enable tripleo deploys via the
ramdisk image.
Change-Id: Ic2ca5f95b8895fa0d6d7314cab9de30a7204541c
Use "deploy" to denote that an element provides the deploy
capability for a ramdisk for tripleo installation purposes.
This will be a 3-part change to enable renaming deploy to
deploy-baremetal so that the generic "deploy" capability can
be used for the provides file, as a dependant change will have to
be made in tripleo-incubator.
The tripleo-incubator change is
I1ff4bb98c99dfe87ccc4fb19767b93e27707d3a7 and that swaps to using
deploy-baremetal in place of deploy for ramdisk creation when using
baremetal.
Change-Id: Ibb4026e8fc8ba6378061461c4796a91ab2fa991f
/etc/lsb-release doesn't always exist in cloud images and doesn't
serve any significant purpose in this element so removing the
dependency entirely.
Change-Id: I4d972074e6e10fea09a875cbc4ed4e60248d46d9
DIB_OFFLINE has wide-ranging effect. This patch adds a tunable that
only turns on the tarball-caching behaviour specifically for the
debian element.
Change-Id: Idd646d7909df6907afc0eeeec1129c3f1a1f92bc
Moves the code that removes default cloud interfaces
into the dhcp-all-interfaces element. Having it live in
stable-interface-names won't work right now because we
need this for virtualized testing.
Change-Id: I3166951c6fbb2faec53ffc339edd2fd0c3512300
“debian” element now source the ${TARGET_ROOT}/.extra_settings file. We
can use this file to adjust its behavior and specifiy what init system
should be used.
Change-Id: Id57ce879341184a57851d2578cf70978f409a48e
Fixes problems found by set -eu and pipefail, including:
-Many unset variables
-Commands that can fail under normal circumstances, which breaks
with set -e. This change swallows those expected errors to allow
our existing error code to handle them.
-The dkms element was not finding Fedora kernel versions correctly.
This may be an issue for other distros too, but since Fedora was
working fine without this functionality I only changed it to print
a warning message rather than failing the build when it happens.
-The ramdisk init script will not be set -eu because if it fails
the result is a kernel panic, which can be tricky to debug.
However, in testing with set -e a few failing commands were found
and have been fixed in this patch.
Change-Id: I44cf98dfc80cfcaec54b88cc83be80a3dbf2cec3
Mariadb package in RDO repository is mariadb-galera-server, but
this name is mapped to MariaDB-Galera-server because of
mariadb installed from mariadb.org.
To avoid mapping conflicts mariadb-rdo uses virtual package name
mariadb-rdo-galera-server which is mapped to mariadb-galera-server.
Change-Id: Idf77d91876baeb81d89eb688808b892ece2bf19a
This was supposed to have been moved to the redhat-common element,
and having it here too is both confusing and may break builds
depending on which version gets used.
Change-Id: Icae5cc633e9e49a9ee63bd9dfc94657c6795c6f1
Use "operating-system" to denote that an element provides that to the
image being created. This can then be used to specify an abstract
dependency in other elements to assist in build-time image verification.
Change-Id: Ic125803da65e0f8f8c20ef90b08815f4f7d09762
* Create a standard element to copy manifests out of the image and
into the build area.
* Ensure all current manifests are copied into a standard manifests
directory
Change-Id: I37eff5a13a14564e1adc33eb4f0144d571267617
The version of depmod in busybox does not work if two versions of
the same kernel version are available, as search paths are not
honoured correctly. However, we don't need to actually call
depmod as it's done during image building anyway.
Change-Id: Idd3cd5854e7c86e7ca1f2b0e50758d7db79ab6e7
Co-Author: matthew.gilliard@hp.com
Closes-bug: #1302856
In the bash script "99-override-default-apt-conf" 'set -u'
is being used to check for uninitialised variables.
This resulted in generic 'unbound variable' messages rather
than the intended error messages.
Tweaked the check for DIB_APT_CONF to work if the variable is unbound;
so that we get the intended error message rather than the `unbound
variable` message.
Change-Id: Ib8e287060f32312ab80dd7f44e2792ecca48edbb
Adds an environment variable DIB_ADD_APT_KEYS pointing to a folder of
apt repo GPG keys. Each key will be verified and installed with apt-key
to the apt keyring.
Change-Id: I4b15347a76aa3241e741931bb94f17598641ae42
The ${TARGET_ROOT} chroot is owned by the root user.
Without this change, the build will fail for a standard user
with a “Permission denied” error.
Change-Id: I6eb87d3a14292da5620bdfd623ea7ef846fe2af6
There is a known issue in legacy grub. When using splashimage with
serial console, Legacy grub wont start properly. This commit is to
ensure that when serial console is used, legacy grub should not
contain splashimage. It also adds serial support to legacy grub
configuration file.
Change-Id: I2007916998dfe7c66ef51bf8c57c1698dc0fcb75
When the repository references are sha1s the fetch command used will
not work. This will ensure that all of the objects are still fetched,
and all of the local cache references for branches and tags will be
updated rather than just the specified reference in use.
Change-Id: Iad2554b3087a5da37dac6e9f6a72432d49fce83d
Closes-Bug: #1301435
--target has been introduced in grub2. This patch ensure we use
the minimal version before adding the --target XXX flag.
Debian Wheezy and Precise share the same limitation regarding the
root device.
Change-Id: I5b3ad42b9fb536d13fb65d84339bc15bc23d99a3
The grub install scripts on Fedora have hardcoded checks for
/sys/firmware/efi and if the directory exists, it uses efi
specific instruction like initrdefi, linuxefi etc. vm element
should fix it once the configuration is generated.
Closes-bug: #1231946
Change-Id: I888304cb9167b8e074b04ca6c5b2f9143b70d37d
This was calling it for all interfaces previously, making the fixes
we'd put in place be ineffective.
Change-Id: I16bf81225a942e3b19a7e745d949e6ddea2fd50e
When high VM churn is encountered dhcp-all-interfaces got tangled up
and leaked instances until upstart run out of filedescriptors.
This happened because we were locking on every invocation, and the
lock logic was disabling the single-interface code - so we always
probed every interface every time - and this was serialized across
every instance of dhcp-all-interfaces.
Change-Id: I4ef1fb83d978cc99d4cb9cc2666bde302c6db7d1
To create an auditable log of packages installed in an image use
dpkg-query to create a json data file with the package names, version
and install status.
Change-Id: I59018221edcb944a876ad47b402538c63c426bc7
The cloud-init package on Debian Linux overwrites the system
hostname to "(None)" unless a hostname is specified in one
of the /etc/cloud/cloud.cfg.d/* files. This change applies
a default hostname of "debian" using cloud-init.
Change-Id: I9b411df44cfa05f899e708900f95719c0bcd6267
Corrects an issue in the config_exists function that could
cause duplicate interfaces to be configured on Ubuntu.
Previously we used 'return ifquery' directly which caused
a silent 'numberic argument required' error to go unnoticed.
This would also return 1 meaning a new interface would get
configured.
The new logic should handle things properly.
Change-Id: I625225e15113d7e184e3bcb5054df1616dec008a
Closes-bug: #1298430
Virtual baremetal instances have their NICs show up as ens4
which doesn't play nicely as a default in devtest at
the moment.
Ideally we'd want it to be em1 like real baremetal
(which is why we put this in the baremetal element
to begin with). Turns out the baremetal element is
required in devtest so we can extract the ramdisk and kernel
so lets leave it alone for now and move this elsewhere
until we get a better solution for fake 'baremetal'
testing.
Closes-bug: #1298152
Change-Id: Ia71e1d32b93db0c4c844a6dc1ebcd04ab0c13f05
Currently the dpkg element fakes start-stop-daemon, initctl and
invoke-rc.d to stop dpkg from starting a bunch of daemons in the
chroot. This is problematic when packages use service, start, stop or
restart commands.
This patch uses a policy-rc.d instead of faking invoke-rc.d to achieve
the same thing. This approach now aligns exactly with debootstrap.
Without this patch DIB runs on some debian distributions fail
when trying to umount the chroot loop device as there are daemons
running.
The log will now show "invoke-rc.d: policy-rc.d denied execution of
start." instead of "Warning: Fake invoke-rc.s called, doing nothing."
Change-Id: I6db192127aca19b5b7915179b781f5192078bfc7
Related-Bug: #1211564
cloud-init packages are not available in the Debian Wheezy repository.
However, they are available in wheezy-backports.
With this change, the cloud-init packages are installed from
wheezy-backports if DIB_RELEASE is wheezy.
Change-Id: I3daa3b0ba185ba3f7c1bf6b8f9b1f8c167fcb340
Those parameters allow to access the console for VMs using
extlinux (CentOS 6 for example). They are already added to
Fedora images.
Change-Id: I035170bd101062e004fb3782b5f8e5a7944a4f03
Closes-Bug: 1296899
pypi-mirror creates a separate mirror index for wheels (one per OS
that mirrors are built on). To be able to use it one then needs to be
able to export multiple mirrors for inclusion in pip.conf. As a drive
by I made it possible to disable the use of the pypi.python.org index
without using --offline (as --offline has larger impact).
Change-Id: I3e85a8069b18cafd7eae4cd0591821acc3b5a739
Remove the correct ifcfg-eth0 file on Fedora.
This will require an associated incubator change as well
to ensure the undercloud/overcloud now use em1.
Change-Id: I4b4bb7b6a25b058eebe889fd8ce1a403aaf193fd
libmariadb-dev is named mariadb-devel on Fedora. mariadb-devel
package is needed for upcoming mariadb element.
Change-Id: Ib62071a964a4449c4e32ef1646ab7a0fb0f5f7b7
Update the systemd serial port element implementation
so that it uses udev rules. Much nicer than
hard coding ttyS0 and ttyS1.
The udev rule only adds real serial device types
(i.e. == 4). See:
define TTY_DRIVER_TYPE_SERIAL 0x0003
from include/linux/tty_driver.h.
Change-Id: I5d7de4815fd09c01693b7da4b8949f22fee20745
Updates the dhcp-all-interfaces element to fix a race
with the recent udev rules implementation on Fedora.
With the new approach we make the udev rule want (require
to startup) a generic dhcp-interface@.service template which
can be started individually for each interface that is
discovered.
The dhcp-interface@.service is setup such that it:
1) It calls dhcp-all-interfaces <iface> directly with
a pre-exec script. This creates the ifcfg file right
before we need it but avoids the case where network.service
might get greedy and try to start it itself.
2) Only runs if the ifcfg script doesn't already exist. This
is important because we only need to bootstrap the DHCP configs...
Once they exist the network.service will take care of starting them
on reboots, upgrades, etc.
3) On initial boot ensure that the initial DHCP interfaces come
up after network.service. Since we really only want
dhcp-all-interfaces to help bootstrap that haven't already
been configured this seems reasonable.
4) We also try to ensure that cloud-init
comes up after the DHCP interfaces. Cloud init has a decently
long timeout that this wasn't a functional problem but it keeps
log file spew down.
Change-Id: I71b026f027182aad49c3435bb903e5e38e524685
Closes-bug: #1294803
This is being added as a separate element because RHEL 7 is too
different from either RHEL 6 or Fedora to share all of the
configuration they do. It uses the redhat-common element for
pieces that are duplicated.
Some current limitations of the element:
-RHEL 7 is currently still in beta, so final image locations are
not available. This currently defaults to the RHEL 6.5 image,
but that will need to be overridden using the DIB_* env vars.
-There are additional tripleo-image-elements changes that will be
needed to be able to use this for building tripleo images.
-Open vSwitch packages are not currently available in the official
RHEL 7 repos.
-RHEL does not support qemu without kvm acceleration, so at this
time it cannot be used as a compute node for virtualized testing.
Change-Id: I705fd475303576525a27ce6801c673b5721792c9
Add an element intended for use in both Fedora and RHEL. This
allows them to share install steps that are common to both.
Change-Id: Ie4e820a7b777b8701514351b1f802cfe57c3812e
Refactors dhcp-all-interfaces.sh so that if an optional
INTERFACE argument (the first argument) is passed to the script
it only inspects that single interface. If no argument is
passed then the previous default behaviour is used which
causes all interfaces to be inspected.
To avoid a collision with the previous $1 we move to using
$FLOCKED for the exec flock command which runs on distributions
using ENI.
Also sets PATH so that the commands within the script
can all be found if it isn't set properly (/sbin/ip, /bin/cat, etc.)
This is a move towards using udev rules to add these types
of interfaces automatically.
Change-Id: I3ec8fd2cc2071bfc6943c744ca619e31b71146fc
Move whether the package or source install type is enabled out of the
source-repositories element and into the base element.
source-repositories wasn't a great fit for this functionality to begin
with.
Specify the install type for an element via the
DIB_INSTALLTYPE_<install_dir_prefix> environment variable.
Additionally with this approach, any new install type can be added
in an element, without having to update source-repositories or anything
in dib.
You could just write your install type implementation under
nova-foo-install, then define DIB_INSTALLTYPE_nova=foo in your
environment, and the scripts under nova-foo-install would get run during
the image build.
Source installs (any scripts under <install_dir_prefix>-source-install)
is the default install type for all elements.
Change-Id: I9414aca360c41e030e27d3d0c0a52d9d8e13d8b1
Since file to be fetched from the root tftp directory it shouldn't
contain any hardcoded path. Additionaly it eliminates bearing with
map-file containing regular expressions for tftp path replacement.
Change-Id: Iee1672834f735d7dfefce43000540522e1d053b9
Closes-Bug: #1291533
Some of the tripleo-image-elements were failing for RHEL due to lack of
build essential, python-dev and libz-dev.
This commit should fix those failure.
Change-Id: I080f9601faedb3259deada5cfbda7d00d3f13eb9
By default most cloud images have disabled the
udev rules which give us stable network interface names. While
this is a reasonable default for something like EC2 (the target
for these images) this is very bad behavour on bare metal
and can cause a "musical NICs" situation to occur where
on reboot the NIC names get swapped.
In this commit we re-enable stable interface naming by
removing the dev nulled rules softlink and installing
the biosdevname package. Once this is done interface
names should again show up as em1, em2 instead of
the old eth0, eth1.
We also remove some the common, statically configured
eth0 config files on some distributions. Equivalent
files (if needed) may be auto-generated by using
the dhcp-all-interfaces element.
Change-Id: Idd67977342719e2f295e2fa2c0ed6cfa8602171a
As git repositories are copied into the image make a note of their
details and add them to a manifest on the build system.
This allows the code used in building an image to be found after
the image build is completed without needing to open the image up
for inspection.
Change-Id: I7dbe9e163ad38a418cf2869a81e720de2c27dfb1
In 8b2325118f we added a line
so that 98-source-repositories tries to return from the top
level script (not from within a function).
Also, remove the return 1 within the function as well
because we just want to continue in these cases.
Change-Id: I66eddc12208b278594a0a8d8676c38d72045ca75
NFS client utilities for Debian are found in nfs-common, and the
Fedora equivalent is found in nfs-utils. The NFS server components
are already accounted for in the nfs-kernel-server mapping.
Change-Id: I2a43208f54b7fb625c239ce22231c43e194a97ed
Looks like shells only support alphanumeric characters and "_"'s in
environment variables. We were substituting "-" characters but in
order to be able to set overrides in projects with names containing
other characters we need to substitute more, I'm looking at you
oslo.config.
Change-Id: I3e2b1b0bc5871e4ec4ffd8117906cd077aa2cb0d
Co-authored-by: James Polley <jp@jamezpolley.com>
This will allow us to add environment variables to source-repository
scripts. Useful for things like arch-specific download urls.
Change-Id: I4d046825a317dc88db3d7673ad261cedacd1a104
This got removed accidentally in a recent consolidation of
install-packages. Adding it back so that -d support works again.
Closes-bug: #1287142
Change-Id: If17e613bc9bc0f808517edfa1506858d3b9dce54
The RHEL 6 Guest Image has been updated with a new release that
addresses a number of bugs. The diskimage-builder element that
references this file needed to be updated to reference the correct
image name. In addition, some notes to help users download the
image from RHN have been added to the README.
Change-Id: I3c9e64a1887afd9c0b370d70eff4b7f9598cebd1
Closes-bug: launchpad-bug-1286568
This patch alphabetizes the openSUSE packages dictionary in
map-packages. The openstack mappings were left
at the bottom as it looked deliberate.
Change-Id: I3661fba4d4ed68c836893e21fb4a8728c691af20
This patch alphabetizes the Fedora packages dictionary in
map-packages. The openstack mappings were left
at the bottom as it looked deliberate.
Change-Id: I4874c19f2a6826062874698e8f61bc6e2685ab19
Extlinux bootloader configuration in "vm" element requires vmlinuz and
initrd.img files in /boot/ with "generic" suffix. When these don't exist,
bootloader configuration should fall back to using whatever does exist.
Change-Id: I79d426e8f008e9f23db899f0b8f8cf2f23643e28
Testing showed that show-ref did not accurately determine whether a
git repository contained the given reference. Testing with name-rev
showed that it did.
Change the HAS_REF determination appropriately to avoid unnecessary
cache updates when using fixed references.
Change-Id: Iece213348516358af84417807f8dd36e959139eb
Reference to ${GRUB_OPTS:""} in 'vm' element causes syntax error
if GRUB_OPTS is set. Fix by changing to ${GRUB_OPTS:-""}.
Change-Id: Iae3ee8b7c4064c92d0cfc1b5a8caa22e53d6d112
We were applying proxy settings after apt-get install runs are done
in the Ubuntu element, which made it ineffective. Secondly, we were
not applying no_proxy settings to apt, which caused it to fail in
corporate settings. More explicit control may be facilitated in future
but local-config is a DTRT tool, and so we should help it DTRT.
I think I've correctly setup Zypper for this, and I have no idea
how to make the same improvement for Yum (and also Yum currently
doesn't set HTTPS proxies, which may lead to similar reports there).
Change-Id: Idbb9781d64d44b717ea22a25429383fa45d84148
Debian builds fail due to missing rsync in the baseline set
of packages that debootstrap defaults to. Rsync is used by a
variety of tripleo-image-elements and should be included in
disk images by default.
Change-Id: I8d83a53dfab279075e11f9825f15ee960395dd17
Add the DIB_GITREPOBASE variable to the source-repositories element
to enable global changing of git repository location.
Change-Id: Icfac5e103fce6e5a3f1a2db094144a0ed89fcc33
* Rename the cache directory for sources
Make the cache directory name match that of the element that creates
it. This makes it easier to find and more logically implies what
element created the cache directory.
* Add REPONAME to repository cache directory
For better usability add the reponame to the directory created
to cache it.
* Add migration code
Move pre-existing cache directories of the old name to the new name.
Change-Id: Ic62f19acb1746888ccbdf95eebf6e653f3e66357
The current method to rewrite the mirror URL in the ubuntu element will
only rewrite archive.ubuntu.com, which leaves the security URL alone.
This is probably not intended for people who are creating images behind
firewalls.
Change-Id: I54a867e0e9d5a7c94324a5c00ff1a83b4e6e4524
All of the yum-based install-packages scripts are doing essentially
the same thing, so let's use one script for all of the elements
that depend on the yum element.
Change-Id: I49e8c9b44e41bcf4cb9fa820e8a9179754694a97
We need to update vim-minimal, otherwise when rabbitmq-server gets
installed and pulls in vim-common, we run into:
https://bugzilla.redhat.com/show_bug.cgi?id=1066983
Change-Id: I910cd6c5c5fcfc6f6780b86029b1b4e660dd8d05
