Tgtd starts after OS boots up automatically, listens on the port 3260,
which cause lio fails to bind the same port later.
This patch removes the auto-start script of tgtd.
In IPA service, lio or tgtd would be used to create iscsi target.
If tgtd be chosen, IPA will start tgtd before iscsi setting.
IF lio be chosen, tgtd would keep not running.
Change-Id: Ic62055ac2f9252df832739631bfcbabfac0f9c4e
Closes-Bug: #1554987
On ubuntu, if an interface exists but is unconfigured then ifquery
$iface will return 0 but no output. This will cause dhcp-all-interfaces
to not attempt to dhcp on that interface.
Change-Id: Ic1532728ae9ca6d759714392f727d25b814ef336
As the doc says, we want to remove all interfaces that come by default
in cloud images. Cloud images also come with an eth1 though, so lets
just remove all interfaces.
Change-Id: I49c74a3285e6a610ac723bdf976f3727d2736749
Where the base install for the image uses systemd but
the iptables service is not present, the postinstall
script for the ironic-agent element can fail. This is
due to 'systemctl disable iptables.service' returning
an error status when the service isn't present. Check
whether the service is enabled using 'systemctl
list-unit-files'.
Change-Id: I8069b062a27caead4097747d7aeae24a5262e117
Add a pkg-map file so that Gentoo can avoid polluting the FS with
files not tracked in the package manager.
Changed the directory name so that the source-install method would
actually be disabled when DIB_INSTALLTYPE_pip_and_virtualenv=package
is set. Also changed source-repository line to be consistent with
the element name.
Change-Id: I5225bd7113ff2588c755ad4cd4ae9a2d78fff196
If you check logs like [1] it's literally thousands of lines of the
same thing over-and-over as the git caching happens. It is basically
all just noise unless you're debugging it specifically. Up this to
tracing level 2 ("-x -x") to see it. Add a note in the help about
multiple flags, which has always been intended but not documented.
Image builds should continue to run with single "-x", but we could
probably greatly increase signal:noise ratio in the logs with a little
more judicial use of this to turn down some of the very noisy &
repetitive parts.
[1] anything in http://nodepool.openstack.org/
Change-Id: I91c5e55814ba9840769357261d203f4850e2eba6
This commit adds 'psmisc' and 'dosfstools' to the required
packages for ironic-agent element which in turn
installs ironic-python-agent and ironic-lib.
The ironic-lib requires the fuser command to be executed,
which needs the package 'psmisc'. Similarly mkfs with
'vfat' requires 'dosfstools' package.
Closes-Bug: 1554075
Change-Id: If421f2394c34bb938813d0e15e5085d093215921
The vm element makes use of parted. In order to create partitions
parted needs to be installed, growroot does not work without partitions.
Change-Id: Ib46cb818e0116f050de01f9a19e6041328d6d478
We are currently removing only eth0 network config in the simple-init
element (since simple-init is responsible for networking if you are
using it). We install an eth1 as well in elements such as debootstrap.
Lets just rm eth*.
Change-Id: Id9ea8c5e402f3a06b9064a939ad4b2e168cd6223
This commit adds testing for the gentoo element based off of the debian
element. In adding testing support a couple of additional errors were
found and corrected, namely the following.
* shm is not in /proc/mounts though it is valid for use based off of
the sticky flag.
* The path in ELEMENTS_PATH needs to be pruned to be usable.
* Added uuidgen-runtime to the list of packages installed for Ubuntu
as the new ubuntu-trusty image does not ship with it.
Change-Id: I0d2768a912b350e1b2cf40d2fd227fdc767b1bcb
This cuts the image size down alot, esspecially if there were lots of
small file deletes.
The fstrim utility is in the util-linux package and should be on
most all systems. fstrim also works with XFS, ext4, btrfs, etc
prodiving the kernel is new enough.
A reduction of 25% or more in size is common.
Change-Id: I269b4416be450369616f9b8e030f84c30e329804
This reverts commit 5184d02a7c.
The decision was made to go with fstrim because it is faster and more
universal that zerofree. The related-id has the patchset that implements
fstrim.
Related-Id: I269b4416be450369616f9b8e030f84c30e329804
Change-Id: If40cf2fc0ecd8686768cbfeac9ecee90907674e7
The "base" element is included by default, and if centos-minimal tries
to provide it then we die because two elements are providing the same
thing.
Change-Id: I2956aaa49ba3137a799f97e0983ab4b7c93a0a0c
This patch add the lshw utils to allow the agent
to retrive the vendor name. It also keeps the
/usr/share/misc/pci.ids file for Ubuntu distro.
Change-Id: I2828a7e585449f63887ad5a2e338b4e043d68e63
I have seem some occasional odd failures coming from the "dnf -y
update" done by elements/base/install.d/00-up-to-date.
dnf seems to sometimes think a package is not installed when it really
is. It then seems to try and re-install them, but notices they are
installed, and then bails with a failure exit [1]. The packages that
seem to cause this vary, but the common thread is that they seem to
have all been installed during the initial phase of installing the
package manager in the chroot.
I suspect that when we are building the chroot, we do our initial
install with the "external" yum & rpm. Then we start using the
dnf/yum in the chroot, but we're actually using meta-data created by
the *external* tools -- which could be vastly different versions or
who-knows-what. While I honestly I don't have an exact root cause,
empirically I've found rebuilding the rpm db always seems to fix
things up.
So this change takes care to rebuild the rpm db with the chroot
version of rpm, and clear out the package metadata for a refresh with
"update". This should hopefully put us in a consistent state.
[1] http://paste.openstack.org/show/487356/
Change-Id: I565df23897ae511356c4861fdbe63823fa6b6ff9
In the common case of not specifying a size, we are already running
"du" over the image to figure out how big it is. Leverage that by
saving it's output and displaying a pruned list of big files when
requested.
We add a flag to show a summarised option (files >10MiB) and another
to show full output, should you wish that level of detail.
"Invocation" documentation is updated (and formatted a little better
while we're here).
Change-Id: I255800790a62fed1c82fcd311f1cc29c9867766d
If the image has an ext filesystem and the zerofree utility is present
on the build system then run zerofree. This should make images as
compressable as possible which is a nice feature when building
compressed qcow2 images.
Change-Id: Ia6062c291f7a3f58b85a4f408ecb3d0574c65d53
This element is similar to vm, but allows more flexibility
on disk partitioning. It receives a DIB_PARTITIONING_SFDISK_SCHEMA
setting, allowing to partition the disk according to project needs.
Change-Id: I01dca5d5fd670d317f7761911a1549507de6e97d
