The default value was set in the centos7 element, but not
exported, which caused issues in rpm-distro. Also changed
a test in rpm-distro to only check for DIB_RELEASE > 22
if it's fedora.
Closes-Bug: #1477172
Change-Id: Ib6f4227411c2e8f1965c3b78bc318512c59a7876
Using "yum --downloadonly" breaks the abstraction of
"install-packages" because it downloads to the yum cache. It also
acts funny if the package is already there.
Add an argument to "-d" which is the directory to download to. dnf
has "download" built in, and for the old case use yumdownloader which
acts about the same. Ensure it is installed, since it comes in
yum-utils.
Also a slight cleanup of the getopt parsing so it's easier to have the
required argument for -d
Thus we can remove most of the stuff in 15-remove-grub. The check for
centos6 and it's lack of grub2 is clarified. All the stuff about
having to remove the package, purging the cache etc so yum gets the
right thing is no longer relevant. The long section of commented out
code at the end is also removed for clarity.
I tested this with an F21, F22 & centos (6) build
Change-Id: Id1e430e7d050a0b99ac449e2ea435e06cda1c4e6
Some minor workarounds for Fedora >= 22 where dnf is the default
package manager. The changes are documented on the Fedora release
notes https://fedoraproject.org/wiki/Changes/ReplaceYumWithDNF
Change-Id: I7d7d6f5d294980dcb217d6190a1efd9e0bbea9a6
Add a YUM variable that defaults to dnf for Fedora 22 and greater. At
this stage the yum element can do double-duty with dnf -- it's mostly
the same. If we find it starts getting too unwieldy we can separate
this later.
Modify the install-packages for yum to use this variable when set, but
default back to "yum" to retain the status-quo.
Change-Id: Ibff71465b392d9f66b6f93955ff9223575d6165c
It's useful to be able to pass in multiple yum repo configuration files
via $DIB_YUM_REPO_CONF, not just a single one.
Change-Id: I43722229a2df58be55bdb2b50c253e957b18e6fe
There is a wide variety of tracing options through the various shell
scripts. Some use "set -eux", others explicity set xtrace and others
do nothing. There is a "-x" option to bin/disk-image-create but it
doesn't flow down to the many scripts it calls.
This adds a global integer variable set by disk-image-create
DIB_DEBUG_TRACE. All scripts have a stanza added to detect this and
turn on tracing. Any other tracing methods are rolled into this. So
the standard header is
---
if [ "${DIB_DEBUG_TRACE:-0}" -gt 0 ]; then
set -x
fi
set -eu
set -o pipefail
---
Multiple -x options can be specified to dib-create-image, which
increases the value of DIB_DEBUG_TRACE. If script authors feel their
script should only trace at higher levels, they should modify the
"-gt" value. If they feel it should trace by default, they can modify
the default value also.
Changes to pachset 16 : scripts which currently trace themselves by
default have retained this behaviour with DIB_DEBUG_TRACE defaulting
to "1". This was done by running [1] on patch set 15. See the thread
beginning at [2]
dib-lint is also updated to look for the variable being matched.
[1] https://gist.github.com/ianw/71bbda9e6acc74ccd0fd
[2] http://lists.openstack.org/pipermail/openstack-dev/2014-November/051575.html
Change-Id: I6c5a962260741dcf6f89da9a33b96372a719b7b0
Allows specifying the path to a yum repo configuration file to be used
during the image build process. The repo configuration file is removed
at the end of the build. This is useful in that it allows using any
arbitrary repo configuration during an image build.
Change-Id: I7d5c67d74a0bb4722ffc60aacfd9fa7e80fb59d5
sudo is not needed, since in-chroot elements are run in the context
of the root user. Furthermore, sudo in pre-install is problematic as
sudo may not have been installed yet (imagine a debootstrap build)
Change-Id: Ib5c7e176a90fe3b8fa9c3cd702d3d815df54f472
rpm-distro element was trying to install bin programs into the
image but it doesn't provide any. Move that logic into the yum
element which provides the install-packages bin.
Change-Id: Id5339fc7ffbef6327fe41f50a3e39ab30b6d0320
disk-image-create processes a DIB_IMAGE_CACHE variable and exports it,
but there are several elements that ignore the value and wrote out
the base location themselves. Use the variable everywhere so that it
will get overridden everywhere.
Change-Id: I00fff354d6c931ad67cf3052d055f0e4604dfdc8
When using the yum element, we should reset the changes we've made to
/etc/yum.conf during post-install.d. Otherwise, this build time
configuration is propagated into booted instances.
Change-Id: I1eea586ca0fefe9bc0cf91fedefcbd141a536fa2
There are some situations where the list of packages to install
in a image is blank (packages blacklisted).
Change-Id: I315f97fe619c25b36cf47ed1b7a65936b753312e
When the call to pkg-map fails, it prints the error to stdout. However,
this output is lost when pkg-map is executed in a subshell, so the
actual error is never seen. This change adds an explicit echo so the
error is shown.
Change-Id: Id6f4fae6acadfe2839b408fb2dd11fb65d65df6e
Updates the yum element's bin/install-packages script
so that if supports using pkg-map instead of map-packages
for package mapping. To make use of the new change
simply add the -m <element name> to allow install-packages
to know which element namespace to use when installing packages.
Use of the new -m option is off by default.
As part of this change we also updated install-packages
to use getopt for in script argument parsing.
Change-Id: I19240e74b69859f7faf9cd80440633234a677d63
Using -n for bash arrays was a little bit bad, and also resulted in
errors when running under set -u. Wean the yum element off the array
and switch to a straight string.
Change-Id: Ifd61fce7dadd5820022e9b2ab42020ba0cb71ce6
Although set -u allows empty WHITELIST=() list to be set, you can't test
-n "$WHITELIST". Looks like the intention of the commit that caused
this issue (Change-ID Iad2d490c86dceab148ea9ab08f457c49a5d5352e) is to
set a policy to prevent future use of bugs due to unbound variables.
Thanks StevenK for pairing with me and helping me hone my bash skills.
Change-Id: I2349c990ba53b0aaecd5119812582c7c848f1e4e
Closes-Bug: #1319987
As with the previous similar changes, this is intended to catch
problems as they happen instead of ignoring them and continuing on
to potentially fail later. Setting this on all existing scripts
will allow us to enforce use via Jenkins.
Change-Id: Iad2d490c86dceab148ea9ab08f457c49a5d5352e
The phrase is no longer needed as of August 23, 2000 with Nicaragua's
joining of the Berne Convention.
Additionally, in at least one instance,
elements/cache-url/bin/cache-url, its existence in the file between
Copyright lines is just weird and feels misleading, even though it is
not.
Remove all of the lines, because sanity.
Change-Id: I24fd76c2b4f66b8036010b5079db39ead729abee
Fixes problems found by set -eu and pipefail, including:
-Many unset variables
-Commands that can fail under normal circumstances, which breaks
with set -e. This change swallows those expected errors to allow
our existing error code to handle them.
-The dkms element was not finding Fedora kernel versions correctly.
This may be an issue for other distros too, but since Fedora was
working fine without this functionality I only changed it to print
a warning message rather than failing the build when it happens.
-The ramdisk init script will not be set -eu because if it fails
the result is a kernel panic, which can be tricky to debug.
However, in testing with set -e a few failing commands were found
and have been fixed in this patch.
Change-Id: I44cf98dfc80cfcaec54b88cc83be80a3dbf2cec3
This got removed accidentally in a recent consolidation of
install-packages. Adding it back so that -d support works again.
Closes-bug: #1287142
Change-Id: If17e613bc9bc0f808517edfa1506858d3b9dce54
All of the yum-based install-packages scripts are doing essentially
the same thing, so let's use one script for all of the elements
that depend on the yum element.
Change-Id: I49e8c9b44e41bcf4cb9fa820e8a9179754694a97
Fix the test for $TARGET_ROOT in root.d/50-yum-cache.
Don't use $TARGET_ROOT in pre-install, it's only set for "root" and "cleanup".
Change-Id: I048364ea08ef503a4466f3494f18f72ebf99b5c2
The yum element provides for specific customizations
for yum based distros. The included customization is
a yum cache mounted outside of the chroot so that yum
downloaded packages are reused on subsequent image builds.
Change-Id: I6833c9fdbc83cb09debec6a789082e105c917800
