We've noticed that centos8 arm64 images have a root devices of
/dev/mapper/loop7p3 which make sense within a dib image build context
but not at boot time. Dib intends to use labels to set the root device
but when efi is used we end up running grub2-mkconfig against the efi
grub config path before we configure grub to use labels.
Fix this by running grub2-mkconfig after its configuration is set.
This should avoid confusion and complicated paths through the scripts
that configure this for us. We then copy the resulting config to the efi
specific grub.cfg location for platforms that have it.
There is also a small refactoring that is done to try and make the ~3
boot variants more clear:
1) Booting with legacy bios
2) Booting with uefi without a signed shim that directly calls grub
3) Booting with uefi and a signed shim that calls grub
Options 1 and 2 share the /boot/grub*/grub.cfg file. Option 3 needs its
grub.cfg to live alongside distro specific efi target.
Change-Id: Ie9790da9d1bbea58197b37b15a48e77f8a93c1ac
While building cloud images, it is common to set modules
for CentOS and RHEL images. Earlier it was part of rhel-common
which was specific to RHEL OS not for CentOS. Moving it
under yum element as module/stream can be enabled or disabled
via dnf itself.
Signed-off-by: Chandan Kumar (raukadah) <chkumar@redhat.com>
Change-Id: Idc0f277f97e92e4d003f059f01b59f1b5513da34
open-iscsi and open-isns need keywording to support gcc-10, move it out
of being keyworded only for musl profiles.
remove unneeded keywords for python-exec and python-exec-conf (marked
stable)
use the full package name for the dev-lang/python-exec-conf package
Change-Id: I44eaf8c2230e9e2089a72fce46954f4336626843
Signed-off-by: Matthew Thode <mthode@mthode.org>
As of grub2 >= 2.02-95 on redhat family distros, calling grub2-install
on an EFI partition will fail with: "this utility cannot be used for
EFI platforms because it does not support UEFI Secure Boot."
This version of grub is now in centos8-stream and non-eus repos of
RHEL-8. It is not currently possible to build whole-disk UEFI images
on these distros, and when this package is promoted this will also
affect centos8 and RHEL-8 eus. The grub maintainers made this change
because the grub2-install generated /boot/efi/EFI/BOOT/BOOTX64.EFI
will never be capable of booting with Secure Boot.
This change defines a $EFI_BOOT_DIR for every distro element. When
directory /boot/efi/$EFI_BOOT_DIR exists a grub.cfg file in will be
generated there. This change also installs the shim package on redhat
family distros, which installs a copy of the shim bootloader to
/boot/efi/EFI/BOOT/BOOTX64.EFI. Using centos as an example, this
allows UEFI to boot the shim /boot/efi/EFI/BOOT/BOOTX64.EFI which
then chains to /boot/efi/EFI/centos/grubx64.efi.
If /boot/efi/$EFI_BOOT_DIR doesn't exist (such as for Ubuntu,
/boot/efi/EFI/ubuntu) the current behaviour of running grub-install to
generate /boot/efi/EFI/BOOT/BOOTX64.EFI will continue. For distros
such as Ubutnu where packaging does not populate /boot/efi/EFI/ubuntu
with .efi files, secure boot can be added in the future by copying
.efi files to /boot/efi/EFI/ubuntu and copying the shim file to
/boot/efi/EFI/BOOT/BOOTX64.EFI.
Change-Id: I90925218ff2aa4c4daffcf86e686b6d98d6b0f21
The path for get-pip.py script in version 3.5 has been changed
with this commit [1].
[1] 2360f025eb
Change-Id: Ifde16e40b4e241c6c4c93df44330c403ee903e6f
As of grub2 >= 2.02-95 calling grub2-install on an EFI partition will
fail with: "this utility cannot be used for EFI platforms because it
does not support UEFI Secure Boot." In the case of ironic deployments,
ironic-python-agent will call efibootmgr to set the local boot for
subsequent boots.
This change adds efibootmgr to the image as well so any other UEFI
menu changes can be made manually.
Change-Id: I765ded15da07d6227d1e337960e54ad0e0d6ca39
The python3/python3-pyyaml packages both are never installed and dnf
itself never updated when $DIB_DISTRIBUTION_MIRROR set and used.
This change fix the order of the operations:
1. yum/dnf configure.
2. *.repo patching.
3. yum/dnf update/install execution.
Change-Id: Ifbbf1f0190fe8c8a77fb3be820e8056447e755f6
Signed-off-by: Maksim Malchuk <maksim.malchuk@gmail.com>
The trvial fix allow override to work in air-gapped envirments where
the command 'curl -s https://cloud.centos.org/...' would fail.
Change-Id: I84296d8816042e4cd4cb02f15746b86d600d13d6
Signed-off-by: Maksim Malchuk <maksim.malchuk@gmail.com>
Use the actual virtualenv to install proliant tools, and make sure the
dependencies needed for sum firmware upgrade are included.
Change-Id: Ie1dbb868450918567b2903cdeccda35af1904417
Closes-Bug: #1916346
This PR updates locations for files used by the bootloader depending on
the target operating system built. The current logic does not take into
account latest versions of operating systems and makes it impossible to
build ISOs against those.
With this change it is possible to correctly build CentOS 8, Ubuntu
18.04 and Ubuntu 20.04 images.
Closes-Bug: #1916913
Change-Id: I3ed0041640f539e82805d03ba26fe46217f3ac3c
The only difference between the rhel and redhat entries is rhel has
the extra grub-efi-x86_64 mapping. All redhat family releases would
benefit from having this too, so this change removes the whole rhel
entry and adds grub-efi-x86_64 to the redhat family.
The assumption is that anything which applies to rhel also applies to
centos-stream, and in this case doesn't harm centos or fedora either.
Change-Id: I0dc44c1f2b57516742f4c3e43cfc8874d6b90fa2
This package doesn't exist in the stream base repo, and neither does
centos-linux-repos.
These are presumably replaced by centos-stream-release and
centos-stream-repos. This change adds an else block to handle the
non-stream base packages.
Change-Id: I32249199c3dfa44fc24fba28d24f314112c2e200
Set eus repositories if REG_RELEASE is set instead of the base repos
as the current behavior is to use the non-EUS repositories for RHEL
8.2 deployment which breaks image building for customers.
Change-Id: I8e687b27922c3f6fc3d69794866795ab89ecc346
The get-pip script does not work well with Python 2 and
it raise error during the installation [1].
[1] https://github.com/pypa/get-pip/issues/83
Change-Id: I3755c34da313ef647547c6ae18b59cc04c2cdd60
portage now generates /etc/python-exec/python-exec.conf based on the
order of PYTHON_TARGETS in /etc/portage/make.conf
fixes an issue where ARCH was being detected as amd64 not x86_64
fixes kernel installs (virtual/dist-kernel)
standardizes simple if statements (note, the 'shorthand' method will
pass the exit code back to shell but the 'longhand' does not).
Change-Id: I74041c232bc6ab4d6e67a4ecfaa759aa4a5feb6c
Signed-off-by: Matthew Thode <mthode@mthode.org>
* Add "DIB_UBUNTU_MIRROR_DISTS":
Default: ``updates,security,backports``
Notes: For some deployment, is may be required
to disable backport|update|etc packages
integration.
Change-Id: Ic7dcd29ea658a66763b4422915149e4d3fe663cc
Despite having several issues (like missing firmware), it is still
used by people. It seems that the only way to stop that is to remove it.
Change-Id: I4baed8e8ab663c624dcc8d06ff0293d57b082abb
This use the same workaround as element bootloader's[1] to fix CentOS
8.3 partition image building error with iscsi-boot:
...
2021-01-12 07:11:02.439 | + grub2-mkconfig -o /boot/grub2/grub.cfg
2021-01-12 07:11:02.654 | /usr/bin/grub2-editenv: error: cannot rename the file /boot/grub2/grubenv.new to /boot/grub2/grubenv: No such file or directory.
2021-01-12 07:11:02.665 | Generating grub configuration file ...
2021-01-12 07:11:03.112 | /usr/bin/grub2-editenv: error: cannot rename the file /boot/grub2/grubenv.new to /boot/grub2/grubenv: No such file or directory.
...
[1]: https://review.opendev.org/c/openstack/diskimage-builder/+/750279
Closes-Bug: 1911120
Change-Id: I2de5444f7e1a145df9abb03fa4c367e8bb914e03
This fixes below building error When build centos with element
dracut-regenerate on ubuntu by specifying the initrd and kernel version.
...
2021-01-12 03:44:15.758 | dracut: Cannot find module directory /lib/modules/5.4.0-58-generic/
2021-01-12 03:44:15.759 | dracut: and --no-kernel was not specified
2021-01-12 03:44:15.765 | Traceback (most recent call last):
2021-01-12 03:44:15.766 | File "/tmp/in_target.d/finalise.d/50-dracut-regenerate", line 102, in <module>
2021-01-12 03:44:15.766 | main()
2021-01-12 03:44:15.766 | File "/tmp/in_target.d/finalise.d/50-dracut-regenerate", line 82, in main
2021-01-12 03:44:15.766 | raise e
2021-01-12 03:44:15.766 | subprocess.CalledProcessError: Command '['dracut', '--list-modules']' returned non-zero exit status 1.
...
Change-Id: I87ae20b3fa2f291bb107e607137fcd7b1c0a4996
While looking at DIB logs, it is very hard to debug dracut
issues due to missing modules, listing dracut modules will
give an insight.
Related-Bug: #1907457
Signed-off-by: Chandan Kumar (raukadah) <chkumar@redhat.com>
Change-Id: I4d277bdfd648adba5a749d22d905c66b807e249a
With Centos 8.3, centos-repos package has been replaced by
other packages [1].
[1] https://lists.centos.org/pipermail/centos-devel/2020-September/056069.html
Also Increase flake8 and pyflakes version in lower-constraints.txt as
this was already broken.
Change-Id: Ife139fcaff0c2d944098ea353259971d2d3f18b8
The git package pulls in heavy dependencies for just a few rarely
used commands. git-core should be enough (and already uses for Suse).
Change-Id: I96b71072c22c26b3b651466053b9e9561527cbe5
Modern distros use more creative interface naming, e.g. CentOS 8
adds both eth0 and ens3 (!). Remove everything.
Change-Id: Ibdebdb09ea790787840cf9b817d4eb549ef18249
Grub2 messes up arguments with double quotes in them, changing from
key="value" to "key=value" [1]. Support this format as well.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=950760
Change-Id: Icf4c9f86009d29a342d6e0e21644af680066b0b2
Autoremove can touch packages, that are assumed to be present
for post-install step.
A good example is dkms, which is dropped in
install.d, but dkms element try to use it in post-install step.
This results in the following log [1]
[1] http://paste.openstack.org/show/797809/
Change-Id: I635af230c6b250fee273039935cf19506e83b3d1
