# vim: syntax=sh ts=4 sts=4 sw=2:et
# Copyright 2012 Hewlett-Packard Development Company, L.P.
# All Rights Reserved.
#
# Licensed under the Apache License, Version 2.0 (the "License"); you may
# not use this file except in compliance with the License. You may obtain
# a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the
# License for the specific language governing permissions and limitations
# under the License.

function tmpfs_check() {
  [ "$DIB_NO_TMPFS" == "0" ] || return 1
  [ -r /proc/meminfo ] || return 1
  total_kB=$(awk '/^MemTotal/ { print $2 }' /proc/meminfo)
  # tmpfs uses by default 50% of the available RAM, so the RAM should be at least
  # the double of the minimum tmpfs size required
  RAM_NEEDED=$[ $DIB_MIN_TMPFS * 2 ]
  [ $total_kB -lt $(($RAM_NEEDED*1024*1024)) ] || return 0
  echo "Not enough RAM to use tmpfs for build. ($total_kB < ${RAM_NEEDED}G)"
  return 1
}

function mk_build_dir () {
  TMP_BUILD_DIR=$(mktemp -t -d --tmpdir=${TMP_DIR:-/tmp} image.XXXXXXXX)
  TMP_IMAGE_DIR=$(mktemp -t -d --tmpdir=${TMP_DIR:-/tmp} image.XXXXXXXX)
  [ $? -eq 0 ] || die "Failed to create tmp directory"
  export TMP_BUILD_DIR
  if tmpfs_check ; then
    sudo mount -t tmpfs tmpfs $TMP_BUILD_DIR
    sudo mount -t tmpfs tmpfs $TMP_IMAGE_DIR
  fi
  sudo chown $(id -u):$(id -g) $TMP_BUILD_DIR $TMP_IMAGE_DIR
  trap cleanup EXIT
  echo Building in $TMP_BUILD_DIR
  export TMP_IMAGE_PATH=$TMP_IMAGE_DIR/image.raw
  export TMP_HOOKS_PATH=$TMP_BUILD_DIR/hooks
}

function finish_image () {
    mv $TMP_IMAGE_PATH $1
    cleanup_dirs
    # All done!
    trap EXIT
    echo "Image file $1 created..."
}

function save_image () {
    # TODO: this really should rename the old file
    if [ -f  $1 ] ; then
       echo "Old Image file Found REMOVING"
       rm -f $1
    fi

    cp $TMP_IMAGE_PATH $1
    cleanup_dirs
    # All done!
    trap EXIT
    echo "Image file $1 created..."
}

function element_pre_check() {
    local element_dir=$1
    [ -d $element_dir ] || return 1
    if [ -d $element_dir/first-boot.d ] ; then
      first_boot_deprecated_message $element_dir
    fi
}

_DISPLAYED_FIRST_BOOT_DEPRECATED=0
function first_boot_deprecated_message() {
    local element_dir=$1
    echo "WARNING: first-boot.d found in $element_dir"
    if [ $_DISPLAYED_FIRST_BOOT_DEPRECATED -eq 1 ] ; then
        return
    fi
    echo "***********************************************************"
    echo "*                                                         *"
    echo "*                                                         *"
    echo "*                                                         *"
    echo "*                                                         *"
    echo "* WARNING: first-boot.d is DEPRECATED, it will be removed *"
    echo "* from diskimage-builder in a future release.             *"
    echo "*                                                         *"
    echo "*                                                         *"
    echo "*                                                         *"
    echo "*                                                         *"
    echo "***********************************************************"
    echo Pausing 10 seconds....
    sleep 10
    _DISPLAYED_FIRST_BOOT_DEPRECATED=1
}

function generate_hooks () {
  mkdir -p $TMP_HOOKS_PATH
  for _ELEMENT in $IMAGE_ELEMENT ; do
    for dir in ${ELEMENTS_PATH//:/ } ; do
      element_pre_check $dir/$_ELEMENT || continue
      cp -t $TMP_HOOKS_PATH -a $dir/$_ELEMENT/* ;
      break
    done
  done
}

# Call the supplied break-in routine if the named point is listed in the break
# list.
# $1 the break point.
# $2.. what to call if a break is needed
function check_break () {
  if echo "${break:-}" | egrep -e "(,|^)$1(,|$)" -q; then
    echo "Starting debug shell. Exit to resume building." >&2
    echo At stage $1 >&2
    shift
    "$@"
    echo "Resuming" >&2
  fi
}

# Check that a real element has been chosen (prevents foot-guns)
function check_element () {
  [ -d $TMP_HOOKS_PATH ] || generate_hooks
}

# Run a hook, looking for a regex in its stdout, and eval the matched lines.
# $1 is the hook to run
# $2 is the regex to look for
function eval_run_d () {
  local TEMP=`run_d $1`
  echo "$TEMP"
  if [ `echo "$TEMP" | grep -s "$2"` ]; then
      TEMP=`echo "$TEMP" | grep "$2"`
      eval "$TEMP"
  fi
}

# Usage: map_nbd $image
# Returns nbd device path
function map_nbd {
    (lsmod | grep '^nbd ' >/dev/null) || sudo modprobe nbd max_part=16

    if [[ $(qemu-nbd --help | grep cache) == *writeback* ]] ; then
        CACHE="--cache=writeback"
    else
        echo "Warning: qemu-nbd without --cache=writeback is /slow/."
        CACHE=""
    fi
    NBD_DEV=
    for i in `seq 0 15`; do
        if [ ! -e /sys/block/nbd$i/pid ]; then
            NBD_DEV=/dev/nbd$i
            # Connect to nbd and wait till it is ready
            sudo qemu-nbd -c $NBD_DEV $CACHE $1
            if ! timeout 60 sh -c "while ! [ -e /sys/block/nbd$i/pid ]; do sleep 1; done"; then
                echo "Couldn't connect $NBD_DEV"
                exit 1
            fi
            break
        fi
    done
    if [ -z "$NBD_DEV" ]; then
        echo "No free NBD slots"
        exit 1
    fi
}

# Delete and unmount the working dir used in extracting kernel/initrd
function unmount_qcow_image () {
    sudo umount $WORK_DIR || true
    sudo qemu-nbd -d $NBD_DEV >/dev/null || true
    sudo rm -rf $WORK_DIR

    trap - SIGHUP SIGINT SIGTERM EXIT
}

function mount_qcow_image() {
    trap unmount_qcow_image SIGHUP SIGINT SIGTERM EXIT

    WORK_DIR=$(mktemp -d)
    map_nbd $1
    if [ -e "${NBD_DEV}p1" ]; then
       sudo mount ${NBD_DEV}p1 $WORK_DIR
    else
       sudo mount ${NBD_DEV} $WORK_DIR
    fi
}

function cleanup_dirs () {
    sudo rm -rf $TMP_BUILD_DIR/built
    sudo rm -rf $TMP_BUILD_DIR/mnt
    sudo umount -f  $TMP_BUILD_DIR $TMP_IMAGE_DIR || true
    rm -rf $TMP_BUILD_DIR $TMP_IMAGE_DIR
}

# Run a directory of hooks outside the target.
function run_d() {
    check_element
    check_break before-$1 bash
    if [ -d ${TMP_HOOKS_PATH}/$1.d ] ; then
      ${SCRIPT_HOME}/dib-run-parts ${TMP_HOOKS_PATH}/$1.d
    fi
    check_break after-$1 bash
}

function detach_loopback() {
    local loopdev=$1

    # Remove the map if it exists
    # If setup on a rhel or derivative the map was created with kpartx not losetup
    # and subsequently needs to be removed.
    loopdev_name=$(echo $loopdev | sed 's/\/dev\///g')
    mapper_name=$(sudo dmsetup ls | grep $loopdev_name | awk '{ print $1 }')
    if [ "$mapper_name" ]; then
        sudo dmsetup remove $mapper_name
    fi

    # loopback dev may be tied up a bit by udev events triggered by partition events
    for try in $(seq 10 -1 1) ; do
        if sudo losetup -d $loopdev ; then
            return 0
        fi
        echo $loopdev may be busy, sleeping up to $try more seconds...
        sleep 1
    done
    echo Gave up trying to detach $loopdev
    return 1
}

function arg_to_elements() {
  for arg do IMAGE_ELEMENT="$IMAGE_ELEMENT $arg" ; done

  if [ "$SKIP_BASE" != "1" ]; then
    IMAGE_ELEMENT="base $IMAGE_ELEMENT"
  fi
  if [ "$IS_RAMDISK" == "1" ]; then
    IMAGE_ELEMENT="ramdisk $IMAGE_ELEMENT"
  fi
  echo "Building elements: $IMAGE_ELEMENT"

  IMAGE_ELEMENT=$($SCRIPT_HOME/element-info --expand-dependencies $IMAGE_ELEMENT)
  export IMAGE_ELEMENT

  echo "Expanded element dependencies to: $IMAGE_ELEMENT"
}

function create_base () {
    mkdir $TMP_BUILD_DIR/mnt
    export TMP_MOUNT_PATH=$TMP_BUILD_DIR/mnt
    # Copy data in to the root.
    TARGET_ROOT=$TMP_MOUNT_PATH run_d root
    if [ -z "$(ls $TMP_MOUNT_PATH | grep -v '^lost+found\|tmp$')" ] ; then
        # No root element copied in. Note the test above allows
        # root.d elements to put things in /tmp
        echo "Please include at least one distribution root element."
        exit 1
    fi

    # Configure Image
    # Setup resolv.conf so we can chroot to install some packages
    if [ -L $TMP_MOUNT_PATH/etc/resolv.conf ] || [ -f $TMP_MOUNT_PATH/etc/resolv.conf ] ; then
        sudo mv $TMP_MOUNT_PATH/etc/resolv.conf $TMP_MOUNT_PATH/etc/resolv.conf.ORIG
    fi

    # Recreate resolv.conf
    sudo touch $TMP_MOUNT_PATH/etc/resolv.conf
    sudo chmod 777 $TMP_MOUNT_PATH/etc/resolv.conf
    # use system configured resolv.conf if available to support internal proxy resolving
    if [ -e /etc/resolv.conf ]
    then
        cat /etc/resolv.conf > $TMP_MOUNT_PATH/etc/resolv.conf
    else
        echo nameserver 8.8.8.8 > $TMP_MOUNT_PATH/etc/resolv.conf
    fi
    mount_proc_dev_sys
}

function mount_proc_dev_sys () {
    # supporting kernel file systems
    sudo mount -t proc none $TMP_MOUNT_PATH/proc
    sudo mount --bind /dev $TMP_MOUNT_PATH/dev
    sudo mount --bind /dev/pts $TMP_MOUNT_PATH/dev/pts
    sudo mount -t sysfs none $TMP_MOUNT_PATH/sys
}

function unmount_dir () {
    local pattern="$1" mnts=""
    if [ -n "$pattern" ]; then
        mnts=`awk '{print $2}' < /proc/mounts | grep "^$pattern" | sort -r`
    fi
    if [ -n "$mnts" ]; then
        sudo umount -fl $mnts || true
    fi
}