#!/bin/bash # Configure grub. Note that the various conditionals here are to handle # different distributions gracefully. if [ ${DIB_DEBUG_TRACE:-1} -gt 0 ]; then set -x fi set -eu set -o pipefail if [ ${DIB_EXTLINUX:-0} != "0" ]; then echo "DIB_EXTLINUX no longer supported" exit 1 fi # Some distros have pre-installed grub in some other way, and want to # skip this. if [[ -f "/tmp/grub/install" ]]; then exit 0 fi BOOT_DEV=$IMAGE_BLOCK_DEVICE # All available devices, handy for some bootloaders... declare -A DEVICES eval DEVICES=( $IMAGE_BLOCK_DEVICES ) DIB_BLOCK_DEVICE=${DIB_BLOCK_DEVICE:-} # Right now we can't use pkg-map to branch by arch, so tag an # architecture specific virtual package so we can install the # rigth thing based on distribution. if [[ "$ARCH" =~ "ppc" ]]; then install-packages -m bootloader grub-ppc64 elif [[ "${DIB_BLOCK_DEVICE}" == "mbr" || "${DIB_BLOCK_DEVICE}" == "gpt" ]]; then install-packages -m bootloader grub-pc elif [[ "${DIB_BLOCK_DEVICE}" == "efi" ]]; then install-packages -m bootloader grub-efi grub-efi-$ARCH else install-packages -m bootloader grub-pc grub-efi grub-efi-$ARCH fi GRUBNAME=$(type -p grub-install) || echo "trying grub2-install" if [ -z "$GRUBNAME" ]; then GRUBNAME=$(type -p grub2-install) fi if type grub2-mkconfig >/dev/null; then GRUB_MKCONFIG="grub2-mkconfig" else GRUB_MKCONFIG="grub-mkconfig" fi if [[ ! $($GRUBNAME --version) =~ ' 2.' ]]; then echo "Failure: not grub2" exit 1 fi # Some distros keep things in /boot/grub2, others in /boot/grub if [ -d /boot/grub2 ]; then GRUB_CFG=/boot/grub2/grub.cfg GRUBENV=/boot/grub2/grubenv else # NOTE(ianw) This used to be behind a "-d /boot/grub" but this # directory doesn't seem to exist for gentoo at this point; # something creates it later. So we just fallback to this # unconditionally. GRUB_CFG=/boot/grub/grub.cfg GRUBENV=/boot/grub/grubenv mkdir -p /boot/grub fi # When using EFI image-based builds, particularly rhel element # based on RHEL>=8.2 .qcow2, we might have /boot/grub2/grubenv # as a dangling symlink to /boot/efi because we have extracted # it from the root fs, but we didn't populate the separate EFI # boot partition from the image. grub2-install calls rename() # on this file, so if it's a dangling symlink it errors. Just # remove it if it exists. if [[ -L $GRUBENV ]]; then rm -f $GRUBENV fi echo "GRUB_DEVICE=LABEL=${DIB_ROOT_LABEL}" >> /etc/default/grub echo 'GRUB_DISABLE_LINUX_UUID=true' >> /etc/default/grub echo "GRUB_TIMEOUT=${DIB_GRUB_TIMEOUT:-5}" >>/etc/default/grub echo 'GRUB_TERMINAL="serial console"' >>/etc/default/grub echo 'GRUB_GFXPAYLOAD_LINUX=auto' >>/etc/default/grub if [[ -n "${DIB_BOOTLOADER_SERIAL_CONSOLE}" ]]; then SERIAL_CONSOLE="${DIB_BOOTLOADER_SERIAL_CONSOLE}" elif [[ "powerpc ppc64 ppc64le" =~ "$ARCH" ]]; then # Serial console on Power is hvc0 SERIAL_CONSOLE="hvc0" elif [[ "arm64" =~ "$ARCH" ]]; then SERIAL_CONSOLE="ttyAMA0,115200" else SERIAL_CONSOLE="ttyS0,115200" fi GRUB_CMDLINE_LINUX_DEFAULT="console=tty0 console=${SERIAL_CONSOLE} no_timer_check" echo "GRUB_CMDLINE_LINUX_DEFAULT=\"${GRUB_CMDLINE_LINUX_DEFAULT} ${DIB_BOOTLOADER_DEFAULT_CMDLINE}\"" >>/etc/default/grub echo 'GRUB_SERIAL_COMMAND="serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1"' >>/etc/default/grub # os-prober leaks /dev/sda into config file in dual-boot host # Disable grub-os-prober to avoid the issue while running # grub-mkconfig # Setting a flag to track whether the entry is already there in grub config PROBER_DISABLED= if ! grep -qe "^\s*GRUB_DISABLE_OS_PROBER=true" /etc/default/grub; then PROBER_DISABLED=true echo 'GRUB_DISABLE_OS_PROBER=true' >> /etc/default/grub fi # GRUB_MKCONFIG call needs to happen after we configure # /etc/default/grub above. Without this we can set inappropriate # root device labels and then images don't boot. # # This produces a legacy config which both bios and uefi can boot # Later we copy the final config to an efi specific location to # support uefi specific functionality like secure boot. $GRUB_MKCONFIG -o $GRUB_CFG # If we are using BLS, for debugging purposes dump out the kernel if [[ -e /boot/loader/entries ]]; then grubby --info=ALL fi # Remove the fix to disable os_prober if [ -n "$PROBER_DISABLED" ]; then sed -i '$d' /etc/default/grub fi # Fix efi specific instructions in grub config file if [ -d /sys/firmware/efi ]; then sed -i 's%\(initrd\|linux\)efi /boot%\1 /boot%g' $GRUB_CFG fi # when using efi, and having linux16/initrd16, it needs to be replaced # by linuxefi/initrdefi. When building images on a non-efi system, # the 16 suffix is added to linux/initrd entries, but we need it to be # linuxefi/initrdefi for the image to boot under efi if [[ ${DIB_BLOCK_DEVICE} == "efi" ]]; then sed -i 's%\(linux\|initrd\)16 /boot%\1efi /boot%g' $GRUB_CFG # Finally copy the grub.cfg and grubenv to the EFI specific dir # to support functionality like secure boot. We make a copy because # /boot and /boot/efi may be different partitions and uefi looks # for a specific partition UUID preventing symlinks from working. if [ -d /boot/efi/$EFI_BOOT_DIR ] ; then cp $GRUB_CFG /boot/efi/$EFI_BOOT_DIR/grub.cfg if [ -a $GRUBENV ]; then cp $GRUBENV /boot/efi/$EFI_BOOT_DIR/grubenv fi fi fi # Ensure paths in BLS entries account for /boot being a partition or part of the # root partition if [[ -e /boot/loader/entries ]]; then pushd /boot/loader/entries set +e mountpoint /boot bootmount=$? for entry in *; do if [[ $bootmount -eq 0 ]]; then sed -i "s| /boot/vmlinuz| /vmlinuz|" $entry sed -i "s| /boot/initramfs| /initramfs|" $entry else sed -i "s| /vmlinuz| /boot/vmlinuz|" $entry sed -i "s| /initramfs| /boot/initramfs|" $entry fi done set -e popd # Print resulting grubby output for debug purposes grubby --info=ALL fi if [[ ! "$ARCH" =~ "ppc" ]] && [[ -z "${DIB_BLOCK_DEVICE}" ]]; then echo "WARNING: No bootloader installation will occur." echo "To install a bootloader ensure you have included a block-device-* element" exit 0 fi echo "Installing GRUB2..." # We need --force so grub does not fail due to being installed on the # root partition of a block device. GRUB_OPTS="--force " if [[ "$ARCH" =~ "ppc" ]] ; then # For PPC (64-Bit regardless of Endian-ness), we use the "boot" # partition as the one to point grub-install to, not the loopback # device. ppc has a dedicated PReP boot partition. # For grub2 < 2.02~beta3 this needs to be a /dev/mapper/... node after # that a dev/loopXpN node will work fine. $GRUBNAME --modules="part_msdos" $GRUB_OPTS ${DEVICES[boot]} --no-nvram else # This set of modules is sufficient for all installs (mbr/gpt/efi) modules="part_msdos part_gpt lvm" if [[ ${DIB_BLOCK_DEVICE} == "mbr" || ${DIB_BLOCK_DEVICE} == "gpt" ]]; then if [[ ! "x86_64 amd64" =~ ${ARCH} ]]; then echo "*** ${ARCH} is not supported by mbr/gpt" fi $GRUBNAME --modules="$modules biosdisk" --target=i386-pc \ $GRUB_OPTS $BOOT_DEV elif [[ ${DIB_BLOCK_DEVICE} == "efi" ]]; then # We need to manually set the target if it's different to # the host. Setup for EFI case $ARCH in "x86_64"|"amd64") # This call installs grub for BIOS compatability # which makes portable EFI/BIOS images. $GRUBNAME --modules="$modules" --target=i386-pc $BOOT_DEV # Set the x86_64 specific efi target for the generic # installation below. GRUB_OPTS="--target=x86_64-efi" ;; # At this point, we don't need to override the target # for any other architectures. esac # If we don't have a distro specific dir with presigned efi targets # we install a generic one. if [ ! -d /boot/efi/$EFI_BOOT_DIR ]; then echo "WARNING: /boot/efi/$EFI_BOOT_DIR does not exist, UEFI secure boot not supported" # This tells the EFI install to put the EFI binaries into # the generic /BOOT directory and avoids trying to update # nvram settings. extra_options="--removable" $GRUBNAME --modules="$modules" $extra_options $GRUB_OPTS $BOOT_DEV fi fi fi